Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 114 views

    Lubrication System (Hilux/1Kd-Ftv, 2Kd-Ftv (Tasa Made For Argentina) )

    Uploaded by

    grivaskachiswe40
    This document provides instructions for inspecting and testing the lubrication system on Hilux and 1KD-FTV or 2KD-FTV engines made for Argentina. Key steps include: 1. Checking the engine oil level and quality, adding or changing oil if needed. 2. Removing and installing an oil pressure switch to attach an oil pressure gauge. 3. Warming the engine and checking that oil pressure reads within specified ranges at idle and high rpm. 4. Reinstalling the oil pressure switch with thread adhesive and reconnecting its connector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lubrication System (Hilux/1Kd-Ftv, 2Kd-Ftv (Tasa Made For Argentina) )

    Uploaded by

    grivaskachiswe40
    114 views2 pages
    This document provides instructions for inspecting and testing the lubrication system on Hilux and 1KD-FTV or 2KD-FTV engines made for Argentina. Key steps include: 1. Checking the engine oil level and quality, adding or changing oil if needed. 2. Removing and installing an oil pressure switch to attach an oil pressure gauge. 3. Warming the engine and checking that oil pressure reads within specified ranges at idle and high rpm. 4. Reinstalling the oil pressure switch with thread adhesive and reconnecting its connector.

    Original Title

    m_17_0001

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for inspecting and testing the lubrication system on Hilux and 1KD-FTV or 2KD-FTV engines made for Argentina. Key steps include: 1. Checking the engine oil level and quality, adding or changing oil if needed. 2. Removing and installing an oil pressure switch to attach an oil pressure gauge. 3. Warming the engine and checking that oil pressure reads within specified ranges at idle and high rpm. 4. Reinstalling the oil pressure switch with thread adhesive and reconnecting its connector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    114 views2 pages

    Lubrication System (Hilux/1Kd-Ftv, 2Kd-Ftv (Tasa Made For Argentina) )

    Uploaded by

    grivaskachiswe40
    This document provides instructions for inspecting and testing the lubrication system on Hilux and 1KD-FTV or 2KD-FTV engines made for Argentina. Key steps include: 1. Checking the engine oil level and quality, adding or changing oil if needed. 2. Removing and installing an oil pressure switch to attach an oil pressure gauge. 3. Warming the engine and checking that oil pressure reads within specified ranges at idle and high rpm. 4. Reinstalling the oil pressure switch with thread adhesive and reconnecting its connector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    LUBRICATION – LUBRICATION SYSTEM (HILUX/1KD–FTV, 2KD–FTV 17–1

    (TASA MADE FOR ARGENTINA))

    LUBRICATION SYSTEM (HILUX/1KD–FTV, 2KD–FTV (TASA


    MADE FOR ARGENTINA))
    170C9–10

    ON–VEHICLE INSPECTION
    1. CHECK ENGINE OIL LEVEL
    (a) Warm up the engine, stop the engine and wait for 5 minutes. The oil level should be between the low
    and full level marks of the dipstick.
    If low, check for leakage and add oil up to the full level mark.
    NOTICE:
    Do not fill the engine oil above the full level mark.

    Recommended Viscosity (SAE) 2. CHECK ENGINE OIL QUALITY


    20 W – 50 (a) Check the oil for deterioration, water contamination, dis-
    coloring or thinning.
    15 W – 40
    If the quality is visibly poor, replace the oil.
    10 W – 30
    HINT:
    5 W – 30 TOYOTA Genuine Motor Oil is in this vehicle when it is shipped.
    _C –29 –18 –7 4 16 27 38 Use TOYOTA approved TOYOTA Genuine Motor Oil or equiva-
    _F –20 0 20 40 60 80 100
    Temperature Range Anticipated Before Next lent to satisfy the following grade and viscosity.
    Oil Change G35132 Oil grade:
    G–DLD1 or API grade CF–4, CF
    (API CE or CD may also be used)
    If using SAE 10W–30 or a higher viscosity engine oil in extreme-
    ly low temperatures, the engine may become difficult to start.
    For low temperatures SAE 5W–30 engine oil is recommended.
    3. REMOVE OIL PRESSURE SWITCH ASSY
    (a) Disconnect the oil pressure switch connector.
    (b) Using a 24 mm deep socket wrench, remove the oil pressure switch.

    4. INSTALL OIL PRESSURE GAUGE


    Oil Pressure Gauge

    B11501

    5. WARM UP ENGINE

    HILUX REPAIR MANUAL (Argentina) (DR201E)


    17–2 LUBRICATION – LUBRICATION SYSTEM (HILUX/1KD–FTV, 2KD–FTV
    (TASA MADE FOR ARGENTINA))

    6. CHECK OIL PRESSURE


    Oil pressure:
    Idle 29 kPa (0.3 kgf⋅cm2, 4.2 psi) or more
    3,000 rpm 245 kPa (2.5 kgf⋅cm2, 36 psi)

    If the oil pressure is not as specified, check the oil pump (see page 17–20).

    7.
    INSTALL OIL PRESSURE SWITCH
    Adhesive (a)
    Remove the oil pressure gauge.
    (b)
    Apply adhesive to 2 or 3 threads of the oil pressure switch.
    Adhesive:
    Part No. 08833–00080, THREE BOND 1344,
    LOCTITE 242 or equivalent
    (c) Using a 24 mm deep socket wrench, install the oil pres-
    sure switch.
    P13638 Torque: 15 N⋅m (152 kgf⋅cm, 11 ft⋅lbf)
    NOTICE:
    Do not start the engine for 1 hour after the installation.
    (d) Connect the oil pressure switch connector.
    8. START ENGINE AND CHECK FOR LEAKS

    HILUX REPAIR MANUAL (Argentina) (DR201E)

    You might also like