Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

DS0124 Standard EU en

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

0124

2/2 or 3/2-way Solenoid Valve


for aggressive media, G 1/4

• Pivoted armature valve with manual override


• Direct-acting with separating diaphragm
• Different circuit function available
• Suitable for aggressive media
• Plastic body in PP or PVDF
Type 0124 can be combined with...

Type 2508 Type 1078


Cable plug Timer unit

The Type 0124 is a direct-acting 2/2 or 3/2- Technical data


way pivoted armature solenoid valve. Deliver- Orifice DN 3.0 - 5.0 mm
able in many circuit functions for opening, Body and PP, PVDF
closing, dosing, mixing and distribution. The seat material
magnetic system and the media chamber are Coil material Epoxy
separated from one another by a separating Coil insulation class H
diaphragm system. Seal material EPDM, FKM
NBR and FFKM on request
Media
Circuit function A EPDM Alkalis, acids up to medium concentrations,
alkaline washing and bleaching lyes,
FKM Oxidising acids and substances, oils,
2/2-way valve NC salt solutions, waste gases
Media temperature
EPDM – 30 to +80 °C
Circuit function C
FKM 0 to +80 °C
Ambient temperature Max. +55 °C
3/2-way valve NC Voltage tolerance ±10%
Duty cycle
Intermittent operation 40% ED (30 min) with 8 W version
Circuit function E Continuous operation 100% ED with 5 W version (on request)
A
Electrical connection Tag connector acc. to DIN EN 175301-803 Form A
(previously DIN 43650) for cable plug Type 2508
3/2-way mixer valve
(supplied as standard)
P1 P2
Protection class IP 65 with cable plug
Installation As required, preferably with actuator upright
Circuit function F

3/2-way distribution valve

www.burkert.com p. 1/4
0124

Technical data

Inrush Hold warm/cold Weight Orifice Response times


AC DC
AC [VA] AC [VA/W] DC [W] kg [mm] Opening [ms] Closing [ms] Opening [ms] Closing [ms]
30 15/8 8/11 0.4 2-4 8-15 8-15 10-20 10-20
The springs of each valve are set up for a specific circuit function. Response times [ms]:
When using them in other circuit functions, the permissible operating Measured at valve outlet at 6 bar and +20 °C
pressure changes according to the following table. Opening: pressure build-up 0 to 90%, closing: pressure relief 100 to 10%

Circuit Max. operating pressure [bar] when using the valve in a new circuit function
function Orifice 3.0 Orifice 4.0

A B C D E F A B C D E F
C 10 1 10 1 1 10 5 0.8 5 0.8 0.8 5
D 6 6 6 6 6 3 3 3 3 3 3 3
F 5 1 6 1 1 10 4 1 4 1 1 4

Materials

Manual override: PA

Coil body: Epoxy

Isolating diaphragm FKM, EPDM

O-Rings: FKM, EPDM

Valve body: PP, PVDF

p. 2/4
0124

Ordering chart for valves (other versions on request)

connection

frequency
Pressure

Voltage/
Kv value
function

material

material
Item no.

Item no.
Orifice
Circuit

[V/Hz]

EPDM
[m3/h]

range
water
[mm]

FKM
[bar]

Seal

Seal
Port
All valves body material PP, manual override and cable plug, different seal materials
A G 1/4 3.0 0.25 0-8 024/DC 018 410 067 214
0 - 10 24/50 088 496 022 105
230/50 045 653 062 398
G 1/4 4.0 0.30 0-4 024/DC 062 695 021 660
0-5 024/50 043 005 067 731
110/50 087 029 –
230/50 063 116 063 118
G 1/4 5.0 0.40 0-3 024/DC 062 624 061 321
0 - 4.5 024/50 067 007 054 261
110/50 – 088 468
230/50 022 619 049 969
C G 1/4 4.0 0.30 0-5 024/50 088 420 –
230/50 – 063 625
E G 1/4 3.0 0.25 0-4 024/DC 069 917 078 556
0-6 024/50 066 230 –
230/50 022 294 078 559
G 1/4 4.0 0.30 0-2 024/DC 061 077 067 160
0-3 024/50 086 921 044 693
230/50 053 406 066 033
F G 1/4 4.0 0.30 0-4 024/DC 020 528 –
0-5 230/50 – 066 032
All valves with body material PVDF, manual override and cable plug, seal material FKM
A G 1/4 3.0 0.25 0-8 024/DC 018 188 –
0 - 10 024/50 020 286 –
110/50 078 784 –
230/50 069 006 –
G 1/4 4.0 0.30 0-4 024/DC 023 472 –
0-5 024/50 069 079 –
230/50 087 837 –
G 1/4 5.0 0.40 0-3 024/DC 064 512 –
0 - 4.5 230/50 063 786 –
C G 1/4 4.0 0.30 0-4 024/DC 055 788 –
0-5 230/50 019 078 –
E G 1/4 4.0 0.30 0-2 024/DC 022 340 –
0-3 024/50 020 550 –
230/50 085 599 –

A 2/2-way valve NC C 3/2-way valve NC E 3/2-way mixer valve F 3/2-way distribution valve
A

P1 P2

I &URTHERôVERSIONSôONôREQUEST
Approvals
UR, CSA, ATEX
Voltage
Non-standard voltages


Pressure
BAR Vacuum version
Port Connection
NPT 1/4, sub-base
Materials
Seal material - FFKM
Additional
Optical or electrical feedback

p. 3/4
0124

Dimensions [mm]

The ports are marked with 1, 2 and 3 as indicated in the configuration table,
depending on the circuit function.

Possible port configurations

Circuit function 1 2 3
A1) A - P
C P A R
E P1 A P2
F A P B
1)
Type 0124 has no middle connection in circuit function A.

To find your nearest Bürkert facility, click on the orange box www.burkert.com

In case of special application conditions, Subject to alterations


please consult for advice. © Christian Bürkert GmbH & Co. KG 0710/3_EU_en_00891602

p. 4/4

You might also like