Newest Catalog of Solar System From Anern
Newest Catalog of Solar System From Anern
SOLAR SUPPLIER
@Anernsolar
www.Anernstore.com
group@anern.com
SOLAR ENERGY
ADDRESS. GUANGZHOU
5th Floor, Building B, No.2817 Kaichuang
ADDRESS. SHENZHEN
10th Floor, #A Building Central, No.2002
STORAGE SERIES
Avenue, Science Zone, Huangpu District, Baoyuan Road, Bao'an District,
Guangzhou Shenzhen
TEL: +8620 89269669/89269660 TEL: +86775 27802026/27802025
www.Anern.com
Anern/SOLAR ENERGY PIONEER
MEGA PROJECTS
Anern has successfully completed hundreds of mega government projects in more than 100 countries
in the past 10 years,.
TABLE OF
CONTENT
SOLAR PANEL
1
Module Number: ANM10-54PH 390 395 400 405 410
350
Multiple Busbars (MBB)
Densely distributed grid lines, uniform load, Maximum Power Pmax (W) 390 395 400 405 410
multi-busbars design. Output power
250
increased by more than 5W. Open circuit voltage · Voc (V) 36.7 36.8 37.0 37.1 37.3
(390W-410W)
1724
4.5Φ
Lossless cut
1724
Short circuit current Isc (A) 13.40 13.50 13.60 13.70 13.79
T.Y.L
15
Lossless cutting technology, no mechanical
damage, smooth cutting surface without Voltage at Maximum Power Vmp (V) 30.7 30.9 31.0 31.2 31.3
burrs. Low cell cracking risks, micro-cracking
250
is reduced by more than 50%. Current at Maximum Power Imp (A) 12.71 12.81 12.91 13.01 13.10
Half-cut
350
Module efficiency-n (%) 20.0 20.2 20.5 20.7 21.0
Current density is reduced by 1/2, Internal power
loss reduced to 1/4 of conventional modules. ELECTRICAL CHARACTERISTICS (NMOT)
Rated output power increased by 5~10W.
Maximum power ·Pm (W) 292 296 300 304 308
New Welding Wire
Adopt round wire solder ribbon, low shading Open circuit voltage ·Voc (V) 33.7 33.8 34.0 34.1 34.3
14
area. Multiple reflections of incident light,
35
power increased by 1-2W. Short circuit current Isc (A) 10.93 11.01 11.10 11.18 11.27
Shading, not compromising energy
Up-down symmetrical parallel module design
Voltage at maximum power point·Vm (V) 27.9 28.0 28.2 28.3 28.5 9
30
Effectively reduce current mismatch due to Current at maximum power point·Im (A) 10.48 10.56 10.65 10.73 10.82 Location map of
shading. SECTION:
mounting holes
A-A
High-Density Encapsulation Technology * STC: Irradiation 1000W/m²; AM1.5; environmental temperature 25°C· tested according to EN 60904-3;
Adopts advanced high-density encapsulation * NMOT: irradiation 800W/m²; wind speed 1m/s; environmental temoerature 20℃
technology to ensure the perfect balance of * Pm tolerance: 0~+5W ; power test uncertainty: ±3%; Voc[V], Isc[A], Vm[V] and Im[A] test tolerance: +3%
efficiency and reliability Module efficiency
increased by more than 0.15%.
I-V Curve
MECHANICAL PARAMETERS
Size 1724x1134x30mm (LxWxH) Cell temperature 25℃
Linear Power Output Warranty
Weight 21.5kg
15 25
25-year Front glass 3.2mm toughened glass 18
15-year
warranty for
warranty for
Current (A)
15 1000w/m²
linear power Cell Monocrystalline PERC 182x91mm, 54*2pcs
materials.
output. 12 800w/m²
Current (A)
0 5 10 15 20 25 years 12 AM1.5 1000W/m²
Product Certification 0
MAXIMUM RATED PARAMETERS
0 10 20 30 40 50
IEC61215/61730、IEC62804(PID)、IEC61701(Salt)、 Maximum system voltage (V) DC1500/1000 (IEC)
IEC62716 (Ammonia)、IEC60068-2-68(Sand) Voltage (v)
ISO 9001:2015/quality management system Maximum fuse rated current (A) 20
ISO 14001:2015/ environmental management system
Maximum front static load (Pa) 5400
ISO 45001:2018/occupation health safety management system
ISO 50001:2011/ energy management system Working temperature (°C) -40~+85
IEC TS 62941—2016/ PV industry quality management system
Hail resistance Maximum diameter 25mm, impact speed 23m/s
01 www.anern.com 02
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
91
350
1
SOLAR PANEL
Module Number: ANM10-60PH 430 435 440 445 460
Multiple Busbars (MBB)
250
Densely distributed grid lines, uniform load, Maximum Power Pmax (W) 430 435 440 445 460
multi-busbars design. Output power
increased by more than 5W. Open circuit voltage · Voc (V) 40.7 40.8 41.0 41.1 41.55 4.5Φ
(430W-460W)
1909
1909
703
Lossless cut
T.Y.L
15
Short circuit current Isc (A) 13.59 13.67 13.74 13.82 14.05
Lossless cutting technology, no mechanical
damage, smooth cutting surface without Voltage at Maximum Power Vmp (V) 33.9 34.1 34.3 34.5 35.07
250
burrs.Low cell cracking risks, micro-cracking
is reduced by more than 50%. Current at Maximum Power Imp (A) 12.69 12.77 12.84 12.91 13.12
Half-cut
350
Module efficiency-n (%) 19.9 20.1 20.3 20.6 21.25
Current density is reduced by 1/2, Internal power
loss reduced to 1/4 of conventional modules. ELECTRICAL CHARACTERISTICS (NMOT)
Rated output power increased by 5~10W.
Maximum power ·Pm (W) 327 330 333 336 346
New Welding Wire
Adopt round wire solder ribbon, low shading Open circuit voltage ·Voc (V) 38.2 38.3 38.4 38.5 38.89
14
area. Multiple reflections of incident light,
35
power increased by 1-2W. Short circuit current Isc (A) 10.91 10.95 10.99 11.03 11.16
Shading, not compromising energy
Up-down symmetrical parallel module design
Voltage at maximum power point·Vm (V) 31.9 32.1 32.2 32.4 32.82 9
30
Effectively reduce current mismatch due to Current at maximum power point·Im (A) 10.26 10.30 10.35 10.40 10.54 Location map of
shading. SECTION:
mounting holes
A-A
High-Density Encapsulation Technology * STC: Irradiation 1000W/m²; AM1.5; environmental temperature 25°C· tested according to EN 60904-3;
Adopts advanced high-density encapsulation * NMOT: irradiation 800W/m²; wind speed 1m/s; environmental temoerature 20℃
technology to ensure the perfect balance of * Pm tolerance: 0~+5W ; power test uncertainty: ±3%; Voc[V], Isc[A], Vm[V] and Im[A] test tolerance: +3%
efficiency and reliability Module efficiency
increased by more than 0.15%.
I-V Curve
MECHANICAL PARAMETERS
Size 1909x1134x30mm (LxWxH) Cell temperature 25℃
Linear Power Output Warranty
Weight 23.1kg 18
15 25
25-year Front glass 3.2mm toughened glass 15
15-year
warranty for 1000w/m²
warranty for
Current (A)
12
linear power Cell Monocrystalline PERC 182x91mm,60*2pcs
materials. 800w/m²
output. 9
Backplate High weather resistance 600w/m²
6
Frame Anodic alumina profile 400w/m²
98.00%
100% 3
200w/m²
Junction box IP68, TUV, 3diodes
Warranty for power output
Current (A)
0 5 10 15 20 25 years
12 AM1.5 1000W/m²
Product Certification
MAXIMUM RATED PARAMETERS 0
0 10 20 30 40 50
IEC61215/61730、IEC62804(PID)、IEC61701(Salt)、 Maximum system voltage (V) DC1500/1000 (IEC)
IEC62716 (Ammonia)、IEC60068-2-68(Sand) Voltage (v)
ISO 9001:2015/quality management system Maximum fuse rated current (A) 20
ISO 14001:2015/ environmental management system
Maximum front static load (Pa) 5400
ISO 45001:2018/occupation health safety management system
ISO 50001:2011/ energy management system Working temperature (°C) -40~+85
IEC TS 62941—2016/ PV industry quality management system
Hail resistance Maximum diameter 25mm, impact speed 23m/s
03 www.anern.com 04
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
91
350
1
SOLAR PANEL
Module Number: ANM10-66PH 490 495 500 505 510
Multiple Busbars (MBB)
250
Densely distributed grid lines, uniform load, Maximum Power Pmax (W) 490 495 500 505 510
multi-busbars design. Output power
increased by more than 5W. Open circuit voltage · Voc (V) 45.3 45.5 45.7 45.8 45.9 4.5Φ
2094
Short circuit current Isc (A) 13.79 13.86 13.92 13.99 14.04
2094
873
T.Y.L
15
Lossless cutting technology, no mechanical
damage, smooth cutting surface without Voltage at Maximum Power Vmp (V) 38.0 38.2 38.3 38.5 38.7
burrs.Low cell cracking risks, micro-cracking
is reduced by more than 50%. Current at Maximum Power Imp (A) 12.89 12.97 13.05 13.12 13.18
250
Half-cut Module efficiency-n (%) 20.6 20.8 21.1 21.3 21.7
Current density is reduced by 1/2, Internal power
350
loss reduced to 1/4 of conventional modules. ELECTRICAL CHARACTERISTICS (NMOT)
Rated output power increased by 5~10W.
Maximum power ·Pm (W) 370 373 377 381 385
New Welding Wire
Adopt round wire solder ribbon, low shading Open circuit voltage ·Voc (V) 42.5 42.6 42.8 42.9 43.0
14
area. Multiple reflections of incident light,
35
power increased by 1-2W. Short circuit current Isc (A) 11.12 11.19 11.26 11.33 11.37
Shading, not compromising energy
Up-down symmetrical parallel module design
Voltage at maximum power point·Vm (V) 35.7 35.9 36.0 36.1 36.3 9
30
Effectively reduce current mismatch due to Current at maximum power point·Im (A) 10.36 10.41 10.48 10.56 10.61 Location map of
shading. SECTION:
mounting holes
A-A
High-Density Encapsulation Technology * STC: Irradiation 1000W/m²; AM1.5; environmental temperature 25°C· tested according to EN 60904-3;
Adopts advanced high-density encapsulation * NMOT: irradiation 800W/m²; wind speed 1m/s; environmental temoerature 20℃
technology to ensure the perfect balance of * Pm tolerance: 0~+5W ; power test uncertainty: ±3%; Voc[V], Isc[A], Vm[V] and Im[A] test tolerance: +3%
efficiency and reliability Module efficiency
increased by more than 0.15%.
I-V Curve
MECHANICAL PARAMETERS
Size 2094x1134x30mm (LxWxH) Cell temperature 25℃
Linear Power Output Warranty
Weight 25.1kg 18
15 25
25-year Front glass 3.2mm toughened glass 15
15-year
warranty for 1000w/m²
warranty for
Current (A)
12
linear power Cell Monocrystalline PERC 182x182mm
materials. 800w/m²
output. 9
Backplate High weather resistance 600w/m²
6
Frame Anodic alumina profile 400w/m²
98.00%
100% 3
200w/m²
Junction box IP68, TUV, 3diodes
Warranty for power output
Current (A)
0 5 10 15 20 25 years
12 AM1.5 1000W/m²
Product Certification
MAXIMUM RATED PARAMETERS 0
0 10 20 30 40 50
IEC61215/61730、IEC62804(PID)、IEC61701(Salt)、 Maximum system voltage (V) DC1500/1000 (IEC)
IEC62716 (Ammonia)、IEC60068-2-68(Sand) Voltage (v)
ISO 9001:2015/quality management system Maximum fuse rated current (A) 20
ISO 14001:2015/ environmental management system
Maximum front static load (Pa) 5400
ISO 45001:2018/occupation health safety management system
ISO 50001:2011/ energy management system Working temperature (°C) -40~+85
IEC TS 62941—2016/ PV industry quality management system
Hail resistance Maximum diameter 25mm, impact speed 23m/s
05 www.anern.com 06
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
91
350
1
SOLAR PANEL
Module Number: ANM10-72PH 535 540 545 550 550
Multiple Busbars (MBB)
250
Densely distributed grid lines, uniform load, Maximum Power Pmax (W) 535 540 545 550 550
multi-busbars design. Output power 4.5Φ
increased by more than 5W. Open circuit voltage · Voc (V) 49.4 49.5 49.7 49.8 50.0
(535W-555W) Lossless cut Short circuit current Isc (A) 13.78 13.85 13.92 13.98 14.04
2279
1079
2278
T.Y.L
15
damage, smooth cutting surface without Voltage at Maximum Power Vmp (V) 41.5 41.7 41.8 42.0 42.1
burrs.Low cell cracking risks, micro-cracking
is reduced by more than 50%. Current at Maximum Power Imp (A) 12.90 12.97 13.04 13.12 13.19
250
Half-cut Module efficiency-n (%) 20.9 21.1 21.3 21.5 21.7
Current density is reduced by 1/2, Internal power
350
loss reduced to 1/4 of conventional modules. ELECTRICAL CHARACTERISTICS (NMOT)
Rated output power increased by 5~10W.
Maximum power ·Pm (W) 400 404 407 411 415
New Welding Wire
Adopt round wire solder ribbon, low shading Open circuit voltage ·Voc (V) 46.4 46.5 46.7 46.8 47.0
14
area. Multiple reflections of incident light,
35
power increased by 1-2W. Short circuit current Isc (A) 11.14 11.20 11.25 11.31 11.35
Shading, not compromising energy
Up-down symmetrical parallel module design
Voltage at maximum power point·Vm (V) 38.6 38.7 38.8 39.0 39.1 9
30
Effectively reduce current mismatch due to Current at maximum power point·Im (A) 10.38 10.43 10.49 10.56 10.61 Location map of
shading. SECTION:
mounting holes
A-A
High-Density Encapsulation Technology * STC: Irradiation 1000W/m²; AM1.5; environmental temperature 25°C· tested according to EN 60904-3;
Adopts advanced high-density encapsulation * NMOT: irradiation 800W/m²; wind speed 1m/s; environmental temoerature 20℃
technology to ensure the perfect balance of * Pm tolerance: 0~+5W ; power test uncertainty: ±3%; Voc[V], Isc[A], Vm[V] and Im[A] test tolerance: +3%
efficiency and reliability Module efficiency
increased by more than 0.15%.
I-V Curve
MECHANICAL PARAMETERS
Size 2278x1134x30mm (LxWxH) Cell temperature 25℃
Linear Power Output Warranty
Weight 27.3kg 18
15 25
25-year Front glass 3.2mm toughened glass 15
15-year
warranty for 1000w/m²
warranty for
Current (A)
linear power Cell Monocrystalline PERC 182x91mm, 72*2pcs 12
materials. 800w/m²
output. 9
Backplate High weather resistance 600w/m²
6
Frame Anodic alumina profile 400w/m²
98.00%
100% 3
200w/m²
Junction box IP68, TUV, 3diodes
Warranty for power output
Current (A)
0 5 10 15 20 25 years
12 AM1.5 1000W/m²
Product Certification
MAXIMUM RATED PARAMETERS 0
07 www.anern.com 08
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
1084mm
1400mm
36pcs/pallets, 72pcs/stack, 936pcs/ 40'HQ Container
1722mm
improve PV module power output and reliability.
(410W-430W) HOT
Hot 2.0 Technology
The N-type module with Hot 2.0 technology has
Mechanical Characteristics
Front Glass
Certified to withstand: wind load (2400 Pascal) and High Transmission, Low Iron, Tempered Glass
30
14.0
2400 Pa
5400 Pa
snow load (5400 Pascal).
Frame Anodized Aluminium Alloy 33
Ⅰ A-A
Higher Power Output Junction Box IP68 Rated ( Length: ±2mm Width: ±2mm Height: ±1mm Row Pitch: ±2mm )
Module power increases 5-25% generally, bringing
significantly lower LCOE and higher IRR. TUV 1×4.0mm
2
Output Cables
(+): 300mm ,(-): 300mm or Customized Length
Specifications
Maximum Power Current (Imp) 13.17A 10.61A 13.25A 10.68A 13.33A 10.76A 13.41A 10.83A 13.49A 10.91A
Open-circuit Voltage (Voc) 37.73V 35.84V 37.92V 36.02V 38.11V 36.20V 38.30V 36.38V 38.49V 36.56V
87.4%
Short-circuit Current (Isc) 13.91A 11.23A 13.99A 11.29A 14.07A 11.36A 14.15A 11.42A 14.23A 11.49A
420
12
350 120 ISO45001:2018
10 Isc Occupational health and safety management systems
Current (A)
280
Power (W)
100
8
210 Voc
6 80
4
140 Pmax
60
2 70
0 40
0
0 5 10 15 20 25 30 35 40 45
20
09 www.anern.com 10
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
B
1096mm
1400mm
2278mm
400mm
990mm
Mechanical Characteristics
(560W-580W) Hot 2.0 Technology Cell Type N type Mono-crystalline
Ⅰ
14.0
30
30
10.0
Junction Box IP68 Rated
Higher Power Output
TUV 1×4.0mm
2 11
Module power increases 5-25% generally, bringing
28
Ⅰ Ⅱ
Output Cables
significantly lower LCOE and higher IRR. (+): 300mm ,(-): 300mm or Customized Length A-A B-B
( Length: ±2mm Width: ±2mm Height: ±1mm Row Pitch: ±2mm )
Specifications
ANM-ND560W ANM-ND565W ANM-ND570W ANM-ND575W ANM-ND580W
Module Type
Linear Performance Power Warranty STC NOCT STC NOCT STC NOCT STC NOCT STC NOCT
Guaranteed Power Performance Maximum Power (Pmax) 560Wp 421Wp 565Wp 425Wp 570Wp 429Wp 575Wp 432Wp 580Wp 436Wp
100% Maximum Power Voltage (Vmp) 41.95V 39.39V 42.14V 39.52V 42.29V 39.65V 42.44V 39.78V 42.59V 39.87V
99%
Maximum Power Current (Imp) 13.35A 10.69A 13.41A 10.75A 13.48A 10.81A 13.55A 10.87A 13.62A 10.94A
Open-circuit Voltage (Voc) 50.67V 48.13V 50.87V 48.32V 51.07V 48.51V 51.27V 48.70V 51.47V 48.89V
Short-circuit Current (Isc) 14.13A 11.41A 14.19A 11.46A 14.25A 11.50A 14.31A 11.55A 14.37A 11.60A
87.4% Module Efficiency STC (%) 21.68% 21.87% 22.07% 22.26% 22.45%
480
12
420 120 ISO45001:2018
10 360 Isc Occupational health and safety management systems Maximum Power (Pmax) 644Wp 650Wp 656Wp 661Wp 667Wp
Current (A)
Power (W)
100
8 300
Voc
15%
6
240
80 Module Efficiency STC (%) 24.93% 25.15% 25.37% 25.60% 25.82%
180
4 Pmax
120
2
60 Maximum Power (Pmax) 700Wp 706Wp 713Wp 719Wp 725Wp
60
25%
0 0 40
0 5 10 15 20 25 30 35 40 45 50 55 Module Efficiency STC (%) 27.10% 27.34% 27.58% 27.82% 28.07%
20
11 www.anern.com 12
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
HALF-CUT SINGLE/DOUBLE
Features of Module
GLASS PV MODULE
Multi Busbar Technology
Hot-cut Technology
PID Resistance
Excellent Anti-PID performance guarantee via
optimized mass-production process and materials
control.
100%
156pcs(6×26) Cable 4.0mm.(+)300mm/(-)300mm
2
No. of Cells
99%
Dimensions 2464×1134×30mm Mechanical load front 5400 Pa/back 2400 Pa
25 Year Linear Output Power Warranty Rate Maximum Power(Pmax/W) 600 610 620 630
0.40% Annual Degradation Over 25 years Module Efficiency(%) 21.50 21.80 22.20 22.5
Remark:Electrical data in this catalogue does not refer to a single module,and it's not part of the offer.lt only serves for the comparison among different module types.
13 www.anern.com 14
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
Voltage 230VAC
AC OUTPUT
Max.Efficiency
98%
15 www.anern.com 16
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
Voltage 230VAC
AC OUTPUT
SOLAR CHARGER
Max 2000W& 3000W solar input power respectively Net Weight (kg) 4.4 5.4
17 www.anern.com 18
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
Features of Module
Nominal Operating Frequency 50/60Hz
Surge Power 8400W 12400W
BATTERY MODE OUTPUT(AC)
Pure sine wave solar inverter Nominal Output Voltage 220/230/240VAC
Max 6200W & 6500W solar input power respectively Maximum AC Charging Current 100A
Built in anti-dusk kit for harsh environment Dimension, D x W x H (mm) 420*350*110mm 450*350*110mm
Net Weight (kgs) 9 10
Smart battery charge design to optimize battery life
INTERFACE
Dual output Communication Interface WIFI
WIFI available for IOS and Android OPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity(Non-condensing)
Operating Temperature –10°C - 50°C
Storage Temperature –15°C - 60°C
19 www.anern.com 20
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
Built in anti-dusk kit for harsh environment. Feed-in Grid Frequency Range 49-51±1Hz/59-61±1Hz
Smart battery charge design to optimize EFFICIENCY
Maximum Conversion Efficiency(Solar to AC) 98%
battery life.
Dual output AN-SCI-EVO-7200 AN-SCI-EVO-8200 AN-SCI-EVO-10200 TWO-LOAD OUTPUT POWER
21 www.anern.com 22
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
WIFI&GPRS Available for lOS and Android LCD Display Maximum Charge Current 80A 80A
SOLAR CHARGER
Maximum PV Array Power 5000W 6000W
MPPT Range @ Operating Voltage 120-450VDC
Maximum PV Array Open Circuit
500VDC
Voltage
Maximum Charging Current 100A 100A
Maximum Efficiency 98%
PHYSICAL
Dimension,D*W*H(mm) 100*300*440
Product Topology
Cartoon Dimension,D*W*H(mm) 590*390*208
Net Weight(kgs) 10 11
Gross Weight(kgs) 11 12
Communication interface USB/RS232/GPRS/WIFI
Computer Light Air Conditioner TV Fan
OPERATING ENVIRONMENT
23 www.anern.com 24
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
RGB lighting for different working modes Nominal operating frequency 50/60Hz
RGB automatically switches under different Surge power 7200W 8400W 12400W
25 www.anern.com 26
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
Mains priority mode, Battery priority mode, energy saving priority generator mode, Battery voltage 12VDC/24VDC 24VDC
mains priority unattended mode, Battery priority unattended mode, can be set Minimum start voltage (9.5V-12.5V adjustable)+0.5V for 12VDC mode (*2 for 24VDC)
freely to meet different occasions Low battery voltage cut of (9.5V-12.5V adjustable), 10V(default) for 12VDC mode (*2 for 24VDC)
WIFI/RS485 remote monitoring communication (Optional) Low battery voltage alarm (9.5V-12.5V adjustable)+0.5V,10.5V(default) for 12VDC mode (*2 for 24VDC)
High battery voltage alarm 16V for 12VDC mode (*2 for 24VDC)
LCD Display Information
High Battery Voltage Recover 15.5V for 12VDC mode (*2 for 24VDC)
① ② ③ Battery type AGM,Lead Acid,Lithium, Ternary
NO LCD Display Contents Descriptions
AC Input Mode
① INPUTAC Input
3.
② Input wave form Pure sine wave
(01) Working mode code
③ AC input voltage 110V/120VAC±20% ;220/230/240VAC±20%
OUTPUT AC Output
④ 110/120VAC:70-90VAC(adjustable),80VAC(default) ;
10
ON/OFF button Low input voltage
9
⑤ UP button 220/240VAC:140-180VAC(adjustable),140VAC(default)
⑥ ⑥ BATT battery capacity 110/120VAC:130-145VAC(adjustable),137VAC(default) ;
Max input voltage
⑦ DOWN button 220/240VAC:260-290VAC(adjustable),275VAC(default)
9 LOAD 25%--100% Load output percentage Efficiency (AC mode) >95% (load, full battery)
④ ⑤ ⑦ ⑧
10 Mute Transfer time AC to DC 8ms(Max)
AC Charge Current (Max)
12V 10A 20A 30A 30A /
Solar System Connection
24V 5A 10A 20A 20A 30A
Min charge current 5A, Change by every 5A
DC 24V DC 24V Dimensions
Mounting Wall Mount
27 www.anern.com 28
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
1P 1.5P 2P 3P 3.5P 4P 5P 6P
Features of Module electric Motor
110/120VAC:130-145VAC(adjustable),137VAC(default) ;
WARNIN G
1 .Dang er Hi gh Volt age
2.Non professi ona ls , do not
operate
3 .This equipment is maintai ned
FUSE
AC OUTPUT
12V 12V
Input frequency 50Hz/60Hz (auto sensing)
RS232
12V 12V
Remote
control
AC INPUT AC OUTPUT
20A 20A 30A 40A 50A 50A 50A 50A 50A
RS232 96V / / / 20A 20A 30A 30A 30A
12V 12V Min charge current 5A, Change by every 5A
Dimensions
Mounting Wall Mount
12V 12V Dimensions (W*H*D) 480*280*200mm 640*280*200mm 760*320*240mm
Ship Dimensions (W*H*D) 565*350*255mm 750*370*270mm 840*405*320mm
12V 12V RS 485
WARN ING
1 .D a nge r H igh Vo lta ge
2.N on prof ess ion als , do not
o perate
3 .Th i s equipme nt is m aint ained
by profes sio nals
Net Weight (Solar CHG)(kg) 19 21 29 31 33 53 55 60
FUSE
Remote
controlRS232 Shipping Weight (Solar CHG)(kg) 21 23 31 33 35 58 60 65
12V 12V N
AC INPUT
L G
AC OUTPUT
N L G Warranty 1 year
12V 12V
29 www.anern.com 30
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
(AN-MPJ SERIES)
Maximum PV open circuit voltage 100V (at the lowest temperature) 92V (at a standard temperature of 25℃)
Minimum PV voltage 20V/40V/60V/80V
Rated Charge Current 20A 40A 60A
Note: Please operate at the ambient temperature allowed by the controller. If the ambient temperature exceeds
the allowable range of the controller, please derate it
31 www.anern.com 32
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
(AN-MPK2 SERIES) Maximum PV open circuit voltage 150V (at the lowest temperature) 138V (at a standard temperature of 25℃)
Minimum PV voltage 20V/40V/60V/80V
Rated Charge Current 30A 40A 50A 60A 80A 100A
Note: Please operate at the ambient temperature allowed by the controller. If the ambient temperature exceeds
the allowable range of the controller, please derate it
33 www.anern.com 34
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
MPZ-60 The solar charge controller is a multi-level maximum System voltage 12V/24V/36V/48V/ Auto
power point tracking (MPPT) photovoltaic battery Rated Discharge Current 15A 20A 25A 30A
MPZ-40 charge controller with its own technology. Compared
Own consumption <35mA(48V)
with the PWM controller, the MPPT can improve the
MPPT highest accuracy 99%
control accuracy and the output power of the solar
panel can be increased by 5%-30%. Maximum charging efficiency 97%
Charging control mode Multi-stage(MPPT, Absorption, Float,Equalization,CV)
Float charge 13.8V/27.6V/41.4V/55.2V
Rated Charge
30A-100A Absorption charge 14.4V/28.8V/43.2V/57.6V
Current
Equalization charge 14.6V/29.2V/43.8V/58.4V
Rated Voltage 12V/24V/36V/48V
Load disconnection(LVD) 10.8V/21.6V/32.4V/43.2V
Temperature Rs485/rj45
compensation Port
35 www.anern.com 36
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
(AN-MPSG-N) Inverter
Rated Power 500W 1000W 2000W 3000W 5000W
Speficifation Of Built-in
600WH 1200WH 2500WH 3000WH 5000WH
Lithium Battery
Communication RS485/WIFI(optional)
Solar Input
Max. PV Power 240W 480W 800W 1500W 3000W
Convenient and practical 5VDC-USB output port and 12VDC Operating Humidity 10%-90%
output port Short Circuit Protection Software Protection
MPPT controller greatly improving the charging efficiency External Size 410*210*300mm 410*210*385mm 460*275*495mm 460*275*495mm 550*300*600mm
to more than 20%
Package Size 458*258*348mm 458*258*433mm 495*290*640mm 495*290*640mm 585*315*760mm
Overcharge and overdischarge protections to get a
longer battery life G.W.(Gross Weight) 18kg 27kg 50kg 59kg 90kg
37 www.anern.com 38
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
Dual CPU intelligent control with excellent performance technology Operating Temperature -20°C-+50°C
The mains supply mode/energy-saving mode/battery mode can Operating Humidity 10%-90%
be set flexibly Short Circuit Protection Software Protection
Convenient and practical 5VDC-USB output port and 12VDC
External Size 536*480*505mm 536*480*505mm 536*480*735mm
output port
MPPT controller greatly improving the charging efficiency
to more than 20%
Overcharge and overdischarge protections to get a
longer battery life
Safe and reliable intelligent exhaust fan control
Convenient Touch screen to view system data
Overall automatic protection and alarms including AC output
overload protection. short circuit protection, etc
39 www.anern.com 40
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
(AN-MPSG-E) Inverter
Physical
RS485 IP21 Ingress Heat Dissipation/Cooling Temperature control by intelligent exhaust fan
Protection
Display Digital LCD
Features of Module
Pure Sine Wave Solar Hybrid Inverter
Bulit-in MPPT solar controller, max charge current 120A
Built-in New LiFePo4 lithium battery
Wide PV charging voltage range (20-150VDC/60-450VDC)
With function of Lithium battery automatic activation by PV(3600&6200)
Smart battery charge design to maximize battery lifespan
RGB indicator light
Dual AC output(E3600&6200)
41 www.anern.com 42
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
Phase 1-phase
3600W
6500W
6200W
GRID-TIE OPERATION
PV Input(DC)
Nominal DC Voltage/Maximum DC Voltage 360VDC/500VDC
Start-up Voltage/Initial Feeding Voltage 90VDC/120VDC
Features of Module MPPT Voltage Range 90-500VDC
Pure sine wave solar inverter(on/off Grid) Number of MPPT Trackers/Maximum Input Current 1/23A
Built-in Lithium battery automatic activation Nominal Output Current 15.7A 27.0A
Built-in 120A MPPT Solar charge:max 4200W(for 3.6KW), Power Factor >0.99
Smart battery charge design to optimize battery life TWO LOAD OUTPUT POWER(V2.0)
Dual output Full Load 3600W 6200W
OFF-GRID OPERATION
AC INPUT
AC Start-up Voltage/Auto Restart Voltage 120-140VAC/180VAC
500*310*180
Net Weight(kgs) 8.8 9.8
Gross Weight(kgs) 10 11
INTERFACE
Communication Port RS232/WIFI/GPRS/LITHIUM BATTERY
43 www.anern.com 44
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
≤200A,Maximum
Rated Discharge Current ≤100A,Maximum discharge current 120A discharge current
200A
45 www.anern.com 46
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
AN-LPB-N-48280
Model AN-LPB-N-24100 AN-LPB-N-24200 AN-LPB-N-48100 AN-LPB-N-48200
Long service life over 8 years Shipped Product Charge 50%-60% battery volume delivery
Modular design, small size, and lightweight Protection & Alarm Over temperature, overcurrent, short circuit, overcharge, overdischarge, etc.
With one key switch machine, the operation is more convenient Cooling Method Natural cooling
Suitable for long-term charge and discharge cycles Certification CE, ROHS, UN38.3, MSDS
Adopt multi-level energy consumption management IP Grade IP54
Multiple parallel machines, automatic address acquisition without
manual operation
Support high-current charging and discharging
Front operation and front wiring are convenient for installation
and maintenance
Adopt high-performance processors, international brand devices, high reliability
Multiple communication interfaces: RS485, RS232, CAN
Highly compatible BMS, seamless connection with energy storage inverter
Perfectly compatible with our inverter
Safety certification: CE, ROHS, UN38.3, MSDS, etc
47 www.anern.com 48
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
Typical Capacity 100AH 200AH 100AH 200AH Typical Capacity 50AH 100AH 200AH
Voltage Working Range 22.4-29.2V 22.4-29.2V 42-54.8V 42-54.8V Voltage Working Range 10-14.6V
Energy Storage 2.56Kwh 5.12Kwh 4.8Kwh 9.6Kwh Energy Storage 640WH 1280WH 2560WH
Working Temperature Charge: 0-+55°C; Discharge: -20-+60°C Working Temperature(°C) Charge: 0-+55°C; Discharge: -20-+60°C
Standard Charge Current 0.5C Max. Charge Current 50A 100A 200A
Max. Charge Current 200A 250A 200A 250A Max. Discharge Current 50A 100A 200A
Max. Discharge Current 200A 250A 200A 250A SOC Accuracy <8%
49 www.anern.com 50
SOLAR SOLUTIONS, GO SOLAR WITH ANERN
The electrolyte can hold the battery plates securely in an immobile gel AN-GEL12-80 12 80 258 168 210 214 23.50 5.6mΩ
Radial grid design offers this power storage device excellent discharge AN-GEL12-100 12 100 327 172 211 215 26.20 5.0mΩ
performance
AN-GEL12-120 12 120 406 174 210 234 32.90 4.3mΩ
Due to 4BS lead paste technology, our deep cycle gel battery provides
AN-GEL12-150 12 150 484 171 240 - 38.00 3.8mΩ
long-lasting service life
AN-GEL12-200 12 200 524 238 220 224 55.50 3.2mΩ
Employing unique grid alloy, special gel formulation and distinct positive
and negative lead paste ratio, the maintenance free battery boasts AN-GEL12-250 12 250 520 268 219 223 65.50 2.5mΩ
outstanding deep cycle service performance and over-discharge recovery ability.
Completely manufactured from high purity raw materials, Anern deep cycle
gel battery has extremely low self-discharge
Gas recombination technology ensures excellent seal reaction efficiency,
thus delivering no pollution such as acid mist to the environment
The gel VRLA battery boasts reliable sealing technology which enables
security seal performance
51 www.anern.com 52