ATC

ATC400,
400, DIESEL GENSET
Powered by Cummins Engine www.powerbritish.co.uk
， 380V，
50Hz， ， 1500RPM

ISO 9001 : 2008

STANDARD SPECIFICATION
Voltage Regulation General Features
Voltage regulation maintained within ±0.5%
• Heavy-duty industrial diesel engine
● Between 0.8 and 1.0 lagging and unity
• Brushless synchronous alternators: four-pole
● From no load to full load construction, dynamically balanced
● At speed droop variation up to 4.5% • Prototype tested and production tested
• Gen-set accepts rated load in one step
Frequency Adjustable Ratio • 8-hour base mounted fuel tank
● Change load from 0-100%, within 1.0% (electric speed • Operation & Maintenance manual
regulator), within 4.5% ( mechanical speed regulator) • Special Integrated Steel Base tank and sprayed
overall in gloss enamel paint
• Canopy Color: white, yellow, Green
Frequency Undulation • Optional weather-proof and sound attenuated
● Load from 0-100%, Frequency undulation within 0.25% enclosures available
● No load wire volts max undulation ratio within 1.8% • Full range of accessories and options available
● Three phrase balanced load in the order of 5% • Battery Rack and batteries
• Manufactured in an ISO-9001 certified facility
• Backed by a world wide network of parts and
Effect factor of telecom
service center
● TIF better than 50
● THF to BS4999 Part 40 better than 2% CRITERION
Electromagnetism ISO 9001:2000、ISO3046、ISO8528 BS4999
BS5000PT99、BS5514、AS1359, IEC34 UTE5100
In compliance with BS800 and VDE levels G and N
VDE0530、CSA A22.2, CEMA, NEA

Genset model ATC400

320KW
Power Output (PRP)
400KVA
352KW
Power Output (ESP)
440KVA
Engine Model NTA 855-G2A / NTA855G7
Alternator EUROPEAN TYPE
Canopy Type C400

1. Available in the following voltages:

440/254-415/240V-400/230V-380/220V -220/127V -200/15V.
2. ESP: Standby Power-Standby duty operation under variable, without
overload.
3. PRP: Prime Power-Continuous duty operation, under variable load
24/24-h-10% overload permissible 1 hour/12hours.
o
4. This generator works normally at 55 C with derating.
 www.powerbritish.co.uk
ISO 9001 : 2008

ATC
ATC400,
400, DIESEL GENSET
Cummins Engine
Designed with Safety in Mind
The fully GMSC Range generator set powered by the Cummins engines which manufacturing in USA. & U.K
Cummins water cooled Diesel engine, oil and fuel filter fitted, water separator, Lube-oil drain valve fitted.

GENSET SPECIFICATION
Cast Iron Skirted Block: With main bearing supports between each Turbocharger: Holset exhaust gas
Cylinder , for maximum strength and rigidity, low weight, and optimum driven turbocharger mounted at top of
crank shaft support. engine. Turbocharging provides
Compact Size: For ease of installation and easy access for routine increased power,
maintenance. improved fuel economy, altitude
Direct Fuel Injection System: With high swirl intake ports for thorough compensation, and lower smoke and
mixing of air and fuel to provide low fuel consumption. noise levels.
Forged Steel, I-Beam Cross Section Connecting Rods:
With angle split cap-to-rod interface and cap screw attachment Filters.
For maximum structural strength and ease of service. Air cleaner with dry element and
restriction indicator.
Starting :24 volt negative earth. battery charging alternator 35 amp on Spin full flow lube oil filter.
engine. Cranking current 640 amps at 0 oc.
Fuel System Cooling
24 volt fail safe actuator. Spin-on paper element fuel filters with Bosch Oil cooler, Drain Tap
fuel pump injection system with integral
Electronic governor. Dual flexible fuel lines
And connectors. Standard fuel water separator.

GENSET SPECIFICATION

Engine Model NTA 855-G2A / NTA855G7 Exhaust System

Type 6-cylinder diesel engine
Exhaust Gas Flow m³/h 1960
o
Turbocharged And Air- Exhaust Temperature c 541
Apiration Air Aftercooled Fuel System
Bore x Stroke mm 140 x 152 Fuel Consumption 100% L/hr 100
Compress the ratio 14:1 Tank (L) 623
Engine Speed rpm 1500
Continuous Rated Output /kw 352
Oil Capacity L 45
Coolant Capacity L 21
Starting System Electric - 24 volt DC
Displacement L 14
Lubricant L 36.7
Battery Voltage /Capacity 24VDC/100A/127
Governing Type Electrical

1 Lyric Square Suite 907 London W6 0NB United Kingdom

Tel : +44 203 751 1260 , Fax: + 44 203 751 1264
E-mail: info@powerbritish.co.uk , powerbritish@yahoo.com
2
 ISO 9001 : 2008 www.powerbritish.co.uk

AC ALTERNATOR
EUROPEAN TYPE GENERATOR END
EUROPEAN TYPE has a long history of producing Alternator Technical Data
high-quality reliable products for the power generation
Generator Frame 18/22
market. Their portfolio of high quality generator ends is
Exciter Brushless
recognized as an industry standard.
Cooling Fan Cast alloy aluminum
Bearing Single, double shielded
Alternator Technical Data
Windings 100% copper
European Type AC alternator Connection Type Reconnectable
● Brushless, self exciting Insulation Type Class H
● Class ‘H’ insulation
Pitch 2/3
● Standard degree of protection is IP23
● Self regulating Amortisseur Winding Full
● With fan cooling Voltage Regulator AS440 / R250
● Resist humid grease Voltage Regulation NL - FL ± 1.5%
● AC excitation, rotating rectification tube
Underspeed Protection Standard
● Stator grease insulation covered
● Rotator and excitation high polymer, Resist the Overexcitation Protection IP23
corruption of oil and acid. Standards NEMA, IEC, IEEE, CSA, BS
● Rotator balance is in accordance with BS5625 Phase Sequence A(U), B(V), C(W)
standard 12.5
● High-quality lubrication sealed long-time bearing TIF (1960 Weightings) <50
● Rotator silicon steel close tight Excitation System PMG - optional

CONTROL PANELS
DEEPSEA ELCTRONICS CONTROL PANEL DSE-7320 / 7420
The Model 7320 /7420 is an view the instrumentation. ►Micro-proc
Automatic essor based
Engine Control Module which has Multiple alarm channels design
been designed to allow the OEM to ► Under/Over speed ►Fully PC or
meet demand for increased ► Charge alternator failure front panel
capability within the industry. The ► Emergency stop configuration
module has been designed to ► Low oil pressure ►Automatic
automatically start and stop the ► High engine temperature engine
engine, indicating the operational ► Fail to start starting &
status and fault conditions, shutting ► Fail to come to rest stopping
down the engine and indicating the ► Loss of speed sensing signal ►Automatic
engine failure by means of a Digital Inputs shutdown on fault condition
graphical LCD display and a flashing ► Emergency Stop - A N/C DC ►Custom graphical icon type display
LED on the front panel. positive input ►Provides engine and generator
Selected operational timers and ► 5 fully configurable warning or instrumentation
alarms can be adjusted by the shutdown inputs. ►Provides engine alarms and status
customer. Metering information
Configuration of the module can be Generator Volts L1-N, L2-N, L3-N ►LED & LCD alarm indication
carried out manually utilizing the Generator Volts L1-L2, L2-L3, L3-L1 ►Compatible with 5200, 5300 and
front panel editor, or alternatively by Generator Amps L1,L2, L3 5500 series modules for easy
PC, using the 7320 / 7420 software. Generator Frequency Hz upgrade path.
Operation of the module is via Engine Speed RPM
pushbuttons mounted on the front Engine Oil Pressure (PSI & Bar)
panel with STOP, AUTO and Engine Temperature (°C &°F)
MANUAL modes. Plant Battery Volts
A further pushbutton provides an Engine Hours Run Control Panel By:
LCD DISPLAY SCROLL function to FEATURES
1 Lyric Square Suite 907 London W6 0NB United Kingdom
Tel : +44 203 751 1260 , Fax: + 44 203 751 1264
E-mail: info@powerbritish.co.uk , powerbritish@yahoo.com

3
 www.powerbritish.co.uk
ISO 9001 : 2008
OPTIONAL FEATURES
►Low fuel level alarm shutdown ►Protection for Alarm Module &
►Automatic Fuel Filling System Auxiliary Relay
►Engine Oil Heater ►Circuit Breaker MCCB & ACB
►Remote Radiator ►Mains auto-charger
►Charge Voltmeter ►Engine/Alternator Heaters
►Charge Ammeter ►Trailer
►Critical Silencer ►Enclosures or Soundproof Canopy
►PMG ►Manual Sump Oil Drain Pump
►Tool Kit ►Packing-Export Box
►Residential ►And More
Silencer
►Auto Transfer Voltage Connections
Switch (ATS) 277/480V,3 Phase
►Earth Fault Relay 254/440V,3 Phase
►Remote Monitor 240/416V,3 Phase
Interface 230/400V,3 Phase
►Protection for Alarm Module & Auxiliary Relay 220/380V,3 Phase
►Parallel Control Panel 127/220V,3 Phase
►Circuit Breaker MCCB & ACB 115/200V,3 Phase
►Remote Control Panel 110/190V,3 Phase

Control your
generator
remotely

DSE-550 Parallel Control DSE-7320 Remote

Panel system Control Panel

DIMENSIONS

Open Model Excluding option

Overall size (L*W*h), mm:
3093*1280*1845
Weight (kg):3977

Enclosure Unit
Overall size (L*W*h), mm:
4242*1418*2230
Weight（kg）:4650

In line with our policy of continuous product development, we reserve the right to change specification without notice.

1 Lyric Square Suite 907 London W6 0NB United Kingdom

Tel : +44 203 751 1260 , Fax: + 44 203 751 1264
E-mail: info@powerbritish.co.uk , powerbritish@yahoo.com

www.powerbritish.co.uk 4