Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Physics Experiment 07 (Convex Mirror) - 1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DR. A.N.

KHOSLA DAV PUBLIC SCHOOL, ROURKELA


SESSION: 2023-24
PHYSICS PRACTICAL FOR STD. XII
EXPERIMENT – 07
AIM- To find the focal length of a convex mirror by using a convex lens.

APPARATUS REQUIRED
• An optical bench
• a convex lens with lens holder
• a convex mirror with mirror holder
• two optical needles
• a half metre scale.

RAY DIAGRAM

THEORY

Focal length of convex mirror

𝑹
f=𝟐
Where
PI = R = radius of curvature of convex mirror

PROCEDURE :

• Obtain the image of the tree or the building on a white painted wall (screen) and move the lens forward and
backward to get a sharp image on the wall.
• Measure the distance between the lens and the wall (screen). This will be equal to the rough focal length of
the lens.
• Clamp the holder with lens in a fixed upright and keep the upright at 50 cm mark.and adjust the lens such
that its surface is vertical and perpendicular to the length of the optical bench.
• Take the thin optical needle (object needle) and adjust height of the object needle to make its tip lie on
horizontal line through the optical centre of the lens.
• Note the position of the index mark on the base of the object needle upright.
• Clamp the holder with convex mirror near the lens upright, keeping reflecting surface of the mirror towards
lens. Adjust the height of the mirror to make its pole lie on horizontal line through the optical centre of the
lens.
• See the inverted image of the object needle formed by reflection from the convex mirror.
• Adjust the height of the needle so that the two tips are seen in one line. Move the convex mirror back and
forth till tip to tip parallax is removed.
• Note the position of the index mark on the base of the convex mirror upright.
• Remove the convex mirror, keeping upright in its position.
• With left eye closed, see with the right open eye from the other end of the optical bench. An inverted and
enlarged image of the object needle will be seen.
• Mount the thick optical needle (image needle) on the other end of the optical bench and adjust the height of
the image needle so that its tip is seen in line with the tip of the image when seen with right open eye.
• Note the position of the index mark on base of the image needle upright.
• Record the position of the index marks on the base of upright of convex lens, convex mirror,the object needle
and the image needle in the observation table.

OBSERVATIONS

POSITION OF
SL.NO.
OBJECT NEEDLE CONVEX LENS CONVEX MIRROR IMAGE NEEDLE R (cm)
(cm) (cm) (cm) (cm)
1.
2.
3.

CALCULATIONS

𝑅1+𝑅2+𝑅3
Mean value of PI(R) = = .........cm
3
R
Therefore, f = 2 = ..........cm

RESULT

The focal length of the given convex mirror = ………. cm.

PRECAUTIONS

• The tip of the needle, centre of the mirror and centre of the lens should be at the same height.
• The convex mirror should be placed close to the convex lens.
• Tip to tip parallax should be removed.

**************

You might also like