September 1996 Bulletin 51.

1:RSS

Design RSS Lined Globe Valve

The Design RSS lined globe-style valve (figure 1) has
pure-modified (reinforced) PTFE trim parts, push-
down-to-close action, and positive shutoff. The sophis-
ticated PTFE trim has replaced the previously used
glass-filled or carbon-filled standard PTFE trim without
any loss of mechanical or thermal properties and has
improved the universal chemical resistance. This valve
is for applications involving severely corrosive and tox-
ic flowing media. Within its temperature and pressure
limitations, the Design RSS valve body may be applied
to most media. The Design RSS valve body provides
an economical alternative to alloy valve bodies in a
wide variety of applications.

Features

Fluid Compatibility—The PFA (perfluoroalkoxy
resin)-lined assembly provides corrosion protection by
shielding metal parts from the process media, making
it ideal for controlling severely corrosive media.

Permeating Service—A heavy duty PTFE bel-

lows with PTFE/carbon support rings is available for
W6408 / IL
permeating service. Compared to a standard bellows,
the heavy duty bellows design has an enhanced re- Figure 1. Design RSS Valve with Type 585C Actuator
sistance to permeation (especially in combination with and 3050 Positioner
a Hastelloy C stem) and an extended pressure/tem-
perature range. This is due to a wall thickness of 0.1 Greater safety under vacuum and high temperature
inch (2.5 mm) and pressure retaining rings inside of service is achieved by dovetail anchorings which pro-
the bellows. An optional N10276 nickel alloy (Hastelloy vide a mechanical bond, effectively preventing detach-
C276) bellows seal is also available to meet the needs ment of the lining from the cast valve body.
of severe service conditions.

Easy In-Line Maintenance—The top entry de-

Economy—Because all metal parts are shielded sign eases in-line maintenance. This design also mini-
from the process fluid, the use of expensive alloys is mizes the transfer of pipeline stress, which minimizes
not necessary. leakage both at the valve body joint and seat ring.

Liner Integrity—Lining thickness is a minimum
Longer Life Bellows Seal—The PTFE bellows
of 5 millimeters at all areas where the valve is exposed seal is leak tight and, with proper use and mainte-
to process flow. Transfer molding techniques provide nance,can have an expected life cycle exceeding
for excellent consistency, density, and low permeabil- 500,000 full stroke cycles. The N10276 nickel alloy
ity. Transfer molded PFA material is translucent. This bellows seal, with proper use and maintenance, can
allows for checking of the entire wall surface for pin have an expected life cycle of 10,000 cycles at full
holes and cracks in the material during the manufac- stroke, 100,000 cycles at 1/2 stroke, and 1,000,000
turing process. cycles at 1/4 stroke.
D101291X012

Fisher, Fisher-Rosemount, and Managing The Process Better are marks owned by Fisher
Controls International, Inc. or Fisher-Rosemount Systems, Inc.
All other marks are the property of their respective owners.

Fisher Controls International, Inc. 1985, 1996; All Rights Reserved

Bulletin 51.1:RSS
Specifications
Valve Sizes Construction Materials
J 1/2, J 3/4, J 1, J 1-1/2, J 2, J 3, J and See table 4
4-inches
Temperature Capabilities
Face-To-Face and Flange Compatibility Pressure Service: –20 to 350_F (–29 to 177_C)
DUCTILE IRON STEEL SST Vacuum Service: –20 to 200_F (–29 to 93_C)
Flange
VALVE
SIZE, Class 150 Class 300 Class 150 Class 150 Standard Flow Characteristic/Valve Plug Style
IN. Face-To-Face Equal percentage
ANSI(1) DIN(2) ANSI(1) DIN(2) ANSI(1) DIN(2) ANSI(1) DIN(2)
1/2 --- X --- --- --- X --- X Flow Direction
3/4 --- X --- --- --- X --- X
1 X X X X --- X --- X Up through the seat ring (see figure 2)
1-1/2 X X X --- --- X --- X
2 X X X --- --- X --- X Flow Coefficients
3 X X --- --- --- X --- X
4 X X --- --- X X X X See table 1 and Fisher Controls Catalogs 10 and 12
1. For ANSI/ISA face-to-face dimensions, see figure 3.
2. For DIN face-to-face dimensions, see figure 3. Port Diameters
See table 1
Maximum Inlet Pressures and Temperatures(1)
Maximum Valve Plug Travel
See tables 2 and 3 and figure 3
See table 1
Application Limits
Bonnet Style
Liquid Service: P/P1abs
0.6. For cavitating
Plain
applications, contact your Fisher Controls sales of-
fice or sales representative.
Packing Arrangement
Gas Service: Velocity
0.33 MACH
Braided PTFE rings
Shutoff Classification Yoke Boss and Stem Diameter
Class VI per ANSI/FCI 70-2-1991 See table 1

Bellows Seal Approximate Weight

J Standard PTFE or J Heavy-duty PTFE with See figure 4
PTFE carbon support rings or J N10276 (Hastelloy
C276) See table 4 for pressure/temperature ratings Options
J Bonnet tapped for a 1/8-inch NPT remote vent-
Expected Life Cycle ing, purging, or for gauge mounting
For Standard PTFE bellows J Line-Flange gasket, (stainless steel insert, com-
Full Stroke: 500,000 pression gasket, and PTFE overlay) with thickness
of 0.20 (5.1 mm) for 1/2- through 2-inch sizes, and
For N10276 Nickel Alloy Bellows 0.28 inch (7.1 mm) for 3- and 4-inch size valves
Full Stroke: 10,000 J Tool for removing and installing the seat ring
1/2 Stroke: 100,000
1/4 Stroke: 1,000,000
1. The pressure/temperature limits in this bulletin and any applicable standard or code limitation for the valve should not be exceeded.

2
 Bulletin 51.1:RSS

TRAVEL STOP/
LOAD LIMITER

SEE VIEW A

SEE VIEW B

STANDARD PTFE
OR N10276
NICKEL ALLOY

BELLOWS

LOCKING ROPE

SEE VIEW C

SEAT RING

VALVE PLUG

LINER

W4521–3 / IL

BELLOWS BELLOWS

LOCKING
ROPE
BELLOWS
STEM RETAINER VALVE PLUG
ASSEMBLY

LOCKING
ROPE

SEAT RING
BUSHING VALVE
PLUG

40B4190–D

                

                 
A3598–3 / IL
  

Figure 2. Design RSS Valve Details

3
Bulletin 51.1:RSS
Table 1. Valve Size, Port Diameter(1), Maximum Flow Coefficient, Travel, and Stem and Yoke Boss Diameter
VALVE LIQUID FLOW MAXIMUM VALVE YOKE BOSS
PORT DIAMETER STEM DIAMETER
SIZE COEFFICIENT PLUG TRAVEL DIAMETER
(Cv) AT Heavy Duty Bellows Standard PTFE and
Inches Inches mm MAXIMUM with Support Rings Metal Bellows Inches mm Inches mm
TRAVEL(2) Inches mm Inches mm
3/16 5 0.212(3)
3/16 5 0.462(3)
1/2 and 3/4 3/16 5 0.965(3) N/A N/A
5/16 8 2.09
1/2 13 4.52
3/16 5 0.212(3)
3/16 5 0.462(3)
3/16 5 1.02(3)
1 5/16 8 1.91 5/8 15.9 3/4 19.1 3/8 9.5 2-1/8 54
1/2 13 3.57
3/4 19 8.41
1 25 11.5
1 25 13.4
1-1/2
1-1/2 38 28.6
3/4 19 1
19.1
1-3/16 30 13.3
2
2 51 44.3
2 51 43.3
3
3-3/4 95 94.1
1 1/8
1-1/8 28 6
28.6 1 1/8
1-1/8 28 6
28.6 1/2 12 7
12.7 2 13/16
2-13/16 71
2-1/2 66 69.3
4
4 96 145
1. Inch equivalents of these metric port diameters have been rounded to common fractional diameters. Actual diameter of the 15 millimeter port diameter is 0.591 inches, the 40
millimeter port diameter is 1.575 inches, and the 96 millimeter port is 3.780 inches.
2. KV = (0.865) (CV)
3. With the 3/16-inch port diameter, some variations of the flow coefficients is expected due to dimensional changes of the PTFE seat ring because of cold flow and thermal
expansions.

Table 2. Maximum Allowable Inlet Pressures and

Temperatures for All Class 150 and 300 Valves
PRESSURE, PSIG PRESSURE, BAR
Ductile Ductile
TEMPER- Iron Stainless TEMPER- Iron Stainless
ATURE,
F or Steel ATURE,
C or Steel
Steel Valve Steel Valve
Valve Valve
–20 to 100 285 275 –29 to 38 19.7 19.1
200 260 235 93 17.9 16.3
300 230 205 149 15.9 14.2
350 215 192 177 14.8 13.3

Table 3. Maximum Shutoff Pressure Drop

TEMPERATURE PRESSURE, TEMPERATURE PRESSURE,

F PSI
C BAR
–20 to 250 145 –29 to 121 10.0
300 125 149 8.6
350 93 177 6.4

4
 Bulletin 51.1:RSS
Table 4. Construction Materials
Part Standard Material Optional Material
Ductile iron (DIN 0.7043) Steel (DIN 1.0619) or stainless steel (DIN 1.4308)
Valve Body
with PFA(1) liner with PFA liner
Bonnet Ductile iron Steel or stainless steel
N10276 (Hastelloy C276) or heavy-duty PTFE with
Bellows PTFE
PTFE carbon support rings
Pure modified (reinforced)
Valve plug(2) and seat ring - - -
PTFE
Bonnet bushings Carbon-filled PTFE - - -
Valve plug stem Stainless steel N06455 (Hastelloy C4)
Body-to-bonnet bolting Stainless steel N10276
Packing PTFE - - -
Packing follower and packing box ring Stainless steel N06455
Travel stop Stainless steel N06455
Locking rope PTFE - - -
Bonnet O-ring Fluoroelastomer - - -
Gasket (used with N10276 bellows) PTFE - - -
1. Perfluoroalkoxy resin.
2. The plug for a 3/16-inch (5 mm) port is made of N06455 nickel alloy or R05255 tantalum alloy, and attaches to the bellows with glass- or carbon-filled PTFE cap.

A6889 / IL

Figure 3. Downstream/Outlet Pressure Ratings

5
Bulletin 51.1:RSS

DIN FACE-TO-FACE DIMENSIONS MATING WITH ANSI ANSI/ISA CLASS 300 FACE-TO-FACE DIMENSIONS
CLASS 150 FLANGES MATING WITH ANSI CLASS 300 FLANGES
Valve DIMENSIONS Valve DIMENSIONS
Approximate Approximate
Size
Size, Size
Size,
A B D E
Weight A B D E
Weight
Inches Inches
Inches Pounds Inches Pounds
1/2 5.12 2.36 5.57 3.50 13 1 7.75 3.54 7.83 4.87 25
3/4 5.12 2.36 5.57 3.86 13 1-1/2 9.75 3.97 8.66 6.14 40
1 6.30 2.83 7.83 4.53 23 2 10.50 4.53 8.98 6.50 45
1-1/2 7.88 3.38 8.66 5.91 38 mm Kg
2 9.06 3.82 8.98 6.50 43
1 197.0 90.0 199.0 123.8 11
3 12.20 5.04 13.00 7.87 86
1-1/2 235.0 101.0 220.0 156.0 18
4 13.78 6.94 13.78 8.66 92
2 267.0 115.0 228.0 165.0 20
mm Kg
1/2 130.0 60.0 141.5 89.0 6
3/4 130.0 60.0 141.5 98.0 6
1 160.0 72.0 199.0 115.0 11
1-1/2 200.0 86.0 220.0 150.0 17
2 230.0 97.0 228.0 165.0 20
3 310.0 128.0 330.0 200.0 39
4 350.0 176.0 350.0 220.0 42
MATCH LINE
FOR ACTUATOR

ANSI/ISA CLASS 150 FACE-TO-FACE DIMENSIONS

MATING WITH ANSI CLASS 150 FLANGES
Valve DIMENSIONS Approximate
Size
Size,
A B D E
Weight
Inches
Inches Pounds
1 7.25 3.27 7.83 4.25 23
1-1/2 8.75 3.83 8.66 5.00 36
2 10.00 4.21 8.98 6.00 42
3 11.75 4.76 13.00 7.50 86
4 13.78 6.94 13.78 8.66 92
mm Kg
1 184.0 83.0 199.0 108.0 10
1-1/2 222.0 97.0 220.0 127.0 17
2 254.0 107.0 228.0 152.4 20
3 298.0 121.0 330.0 190.5 39
4 350.0 176.0 350.0 220.0 42 10B4744–F
A5216 / IL

Figure 4. Dimensions and Weights

                               
                                                 

For information, contact Fisher Controls:

Marshalltown, Iowa 50158 USA
Cernay 68700 France
Sao Paulo 05424 Brazil
Singapore 0512

6
Printed in U.S.A.