Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    Select 410nimo Ap

    Uploaded by

    Juan Carlos Rodriguez
    Select 410NiMo-AP is a gas-shielded, flux cored electrode designed for welding 410, 410S, and 405 stainless steels and CA-6NM castings. It provides excellent bead formation and low spatter in all positions. Typical mechanical properties show good ultimate tensile and yield strengths when used with either 100% CO2 or 75% Ar-25% CO2 shielding gases. The electrode has good slag removal and minimal cleanup requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Select 410nimo Ap

    Uploaded by

    Juan Carlos Rodriguez
    8 views1 page
    Select 410NiMo-AP is a gas-shielded, flux cored electrode designed for welding 410, 410S, and 405 stainless steels and CA-6NM castings. It provides excellent bead formation and low spatter in all positions. Typical mechanical properties show good ultimate tensile and yield strengths when used with either 100% CO2 or 75% Ar-25% CO2 shielding gases. The electrode has good slag removal and minimal cleanup requirements.

    Original Title

    select-410nimo-ap

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Select 410NiMo-AP is a gas-shielded, flux cored electrode designed for welding 410, 410S, and 405 stainless steels and CA-6NM castings. It provides excellent bead formation and low spatter in all positions. Typical mechanical properties show good ultimate tensile and yield strengths when used with either 100% CO2 or 75% Ar-25% CO2 shielding gases. The electrode has good slag removal and minimal cleanup requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views1 page

    Select 410nimo Ap

    Uploaded by

    Juan Carlos Rodriguez
    Select 410NiMo-AP is a gas-shielded, flux cored electrode designed for welding 410, 410S, and 405 stainless steels and CA-6NM castings. It provides excellent bead formation and low spatter in all positions. Typical mechanical properties show good ultimate tensile and yield strengths when used with either 100% CO2 or 75% Ar-25% CO2 shielding gases. The electrode has good slag removal and minimal cleanup requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Select 410NiMo-AP

    Description:
    Select 410NiMo-AP is a gas-shielded, flux cored, stainless steel electrode designed for single or
    multi-pass welding in all positions. This electrode finds wide application in power generation equipment,
    such as turbine blades and vanes. It is widely used to weld ASTM CA-6NM castings as well as 410, 410S
    and 405 stainless steels. It is designed for use with either 100% carbon dioxide or 75% Ar-25% CO2.

    Classifications:
     E410NiMoT1-1, E410NiMoT1-4 per AWS A5.22

    Characteristics:
    Select 410NiMo-AP provides superb performance characteristics in all positions. Flat, well
    washed beads can be achieved with minimal weaving. Spatter is low and slag peeling is excellent,
    minimizing cleanup.

    Typical Mechanical Properties (SR 1 Hr. at 1125 F):


    CO2 Ar-25%CO2
    Ultimate Tensile Strength (psi) 129,200 131,700
    Yield Strength (psi) 116,100 115,500
    Percent Elongation 19 17

    CVN (ft ● lb) @ +32°F 27 32


    @ -4°F 25 22

    Typical Weld DepositChemistry):


    Shielding Gas C Cr Ni Mo Mn Si
    75Ar/25CO2 0.02 11.70 4.61 0.52 0.29 0.47
    CO2 0.02 11.50 4.56 0.51 0.27 0.45

    Typical Welding Parameters (CO2)*:


    Optimum Range
    Diameter Position Amperage WFS Voltage Amperage Voltage
    1/16" Flat 330 330 29 150-400 22-34
    Overhead 225 180 26 150-310 22-28
    Vertical up 225 180 25 150-280 22-27

    .045" Flat 250 450 28 130-300 21-32


    Overhead 190 305 26 150-280 21-30
    Vertical up 190 305 25 130-260 21-29

    * For Ar-25%CO2 reduce voltage by 1 to 1.5 volts

    Rev 0 (03/12/2014)

    Notice: The results reported are based upon testing of the product under controlled laboratory conditions in accordance with American
    Welding Society Standards. Actual use of the product may produce different results due to varying conditions. Thus the results are not
    guarantees for use in the field. The manufacturer disclaims any warranty of merchantability or fitness for any particular purpose with
    respect to its products.

    You might also like