Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 708 views

    Sandvik 25.22.2.Lmn: (Welding Wire)

    Uploaded by

    Anonymous w6TIxI0G8l
    Sandvik 25.22.2.LMn is a fully austenitic welding wire for joining stainless steels used in industries like chemical production. It has excellent low temperature toughness and corrosion resistance, making it suitable for cryogenic applications and conditions with ammonium carbamate or nitric acid. The wire composition includes less than 0.02% carbon and 4.5% manganese, with 25% chromium and 22% nickel to provide corrosion resistance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sandvik 25.22.2.Lmn: (Welding Wire)

    Uploaded by

    Anonymous w6TIxI0G8l
    708 views3 pages
    Sandvik 25.22.2.LMn is a fully austenitic welding wire for joining stainless steels used in industries like chemical production. It has excellent low temperature toughness and corrosion resistance, making it suitable for cryogenic applications and conditions with ammonium carbamate or nitric acid. The wire composition includes less than 0.02% carbon and 4.5% manganese, with 25% chromium and 22% nickel to provide corrosion resistance.

    Original Title

    sandvik-25222lmn

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Sandvik 25.22.2.LMn is a fully austenitic welding wire for joining stainless steels used in industries like chemical production. It has excellent low temperature toughness and corrosion resistance, making it suitable for cryogenic applications and conditions with ammonium carbamate or nitric acid. The wire composition includes less than 0.02% carbon and 4.5% manganese, with 25% chromium and 22% nickel to provide corrosion resistance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    708 views3 pages

    Sandvik 25.22.2.Lmn: (Welding Wire)

    Uploaded by

    Anonymous w6TIxI0G8l
    Sandvik 25.22.2.LMn is a fully austenitic welding wire for joining stainless steels used in industries like chemical production. It has excellent low temperature toughness and corrosion resistance, making it suitable for cryogenic applications and conditions with ammonium carbamate or nitric acid. The wire composition includes less than 0.02% carbon and 4.5% manganese, with 25% chromium and 22% nickel to provide corrosion resistance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Datasheet updated 2012­08­17 14:54:47 (supersedes all previous editions)

    Sandvik 25.22.2.LMn
    (Welding wire)
    Sandvik 25.22.2.LMn is a fully austenitic filler material for welding Sandvik 2RE69
    (310MoLN), Sandvik 3R60 U.G. (ASTM 316L) and corresponding grades used in the
    production of urea, nitric acid, sulphuric acid, acetic acid and in gas treatment plants.
    The weld deposit has excellent low temperature toughness that makes it suitable for
    joining stainless steels for cryogenic service.

    Sandvik 25.22.2.LMn is a modified version of the 310 type which is the closest AWS
    grade in AWS A5.9. A constructed designation would be "310LMo".

    STANDARDS

    • AWS ER "310LMo"
    • EN number 25 22 2 N L

    Product standards
    EN ISO 14343

    Approvals
    CE, TÜV.

    CHEMICAL COMPOSITION - FILLER METAL

    CHEMICAL COMPOSITION, WT%

    C Si Mn P S Cr Ni Mo N

    max max max max

    0.020 0.2 4.5 0.015 0.015 25 22 2.1 0.13

    CHEMICAL COMPOSITION - ALL-WELD METAL

    The following data is typical for non heat treated all­weld metal made by MIG welding
    with argon shielding gas.

    CHEMICAL COMPOSITION, WT%

    C Si Mn P S Cr Ni Mo N

    max max max

    0.020 0.1 4 0.015 0.015 24.5 21.5 2.1 0.11

    MICROSTRUCTURE - ALL-WELD METAL

    Fully austenitic.

    MECHANICAL PROPERTIES - ALL-WELD METAL

    Temperature °C 20 400 ­196

    Yield strength, RP 0 . 2 MPa 335 225 ­

    Tensile strength, Rm MPa 575 410 ­

    Elongation, A % 42 29 ­

    Reduction in area, Z % 58 ­ ­

    Impact strength, Charpy V J 120 ­ 100

    Hardness, Vickers HV 170 ­ ­

    PHYSICAL PROPERTIES- ALL-WELD METAL


    Temperature, °C 20 100 300 500

    Thermal conductivity, 14 15 17 19
    W/m °C

    o o ­6
    Thermal expansion per °C, from 20°C (68  F) to 400°C (750  F) 18x10
    3 o o
    Density, g/cm , at 20  C (68  F) 7.9

    CORROSION RESISTANCE- ALL-WELD METAL

    Sandvik 25.22.2.LMn has been developed primarly to cope with the severe corrosion
    conditions existing in the urea industry. Therefore, this filler has excellent resistance to
    corrosion in ammonium carbamate and nitric acid. Sandvik 25.22.2.2LMn also exhibits
    excellent resistance to intregranular corrosion. As an example, the corrosion rate in a
    Huey test for TIG weld metal, (5 x 48 hours in boiling 65% HNO3), is below 0.12
    mm/year.

    RECOMMENDED WELDING DATA

    MIG welding
    Electrode positive is used to give good penetration in all types of welded joint. The
    following table shows common conditions for MIG welding.

    Wire diameter, mm Wire feed, m/min Current, A Voltage, V Gas, l/min

    Short­arc welding

    0.8 5­9 50­140 16­25 15

    1.0 5­9 70­160 16­25 15

    Spray­arc welding

    1.0 6­12 150­230 26­31 22

    1.2 5­9 170­280 27­32 22


    1)
    Pulsed­arc welding

    1.2 3­10 150­250 23­31 18


    1 ) Pulse parameters: Peak current 300 ­ 400 A
    Background current 50 ­ 150 A
    Frequency 80 ­ 120 Hz

    Sandvik can provide recommendations for shielding gases.

    Short­arc welding is used with thin gauge material of less than about 3 mm, in
    depositing root runs, and in welding out­of­flat positions.

    The higher the inductance in short­arc welding, the higher the fluidity of the molten
    pool.

    Spray­arc welding is normally used for heavier gauge material.

    TIG welding
    The parameters for TIG welding depend largely upon the base metal thickness and the
    welding application.

    Electrode negative and a shielding gas of argon or helium should be used to prevent
    oxidation of the weld metal.

    Submerged-arc welding
    Electrode positive is suggested for joint welding to give good penetration.

    Wire diameter, mm Current, A Voltage, V

    2.0 200­300 28­32

    2.4 250­400 28­32

    3.2 300­450 29­34

    Recommended welding flux is Sandvik 15W or Sandvik 31S.

    DISCLAIMER:
    Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when
    we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This
    datasheet is only valid for Sandvik materials.
    www.smt.sandvik.com/contact-us
    www.smt.sandvik.com

    You might also like