JOB SPECIFICATION No.

PIPING MATERIAL
6743-018-6-44-0005
SPECIFICATION
Page 120 of 132

Client : BORL Dept./Sect. : 16/43

Project : BINA REFINERY
Location : BINA (MP) Pipe Class : F25A Sheet 1 of 4

PIPE CLASS : F25A

RATING : 1500
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 3 MM
SPECIAL REQUIREMENT : HYDROGEN SERVICE

TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS

TEMP -29 38 93 149 204 230
PRESS 260.49 260.49 237.28 230.61 222.87 217.16

SERVICE
HYDROGEN AND HYDROGEN BEARING HYDROCARBONS
-FLAMMABLE, TOXIC/NON-TOXIC BUT NON-LETHAL.

NOTES
7 FOR RESTRICTION ON USE OF BALL,PLUG & BUTTERFLY VALVES,REFER GENERAL NOTES.
17 FOR HYDROGEN SERVICE, CARBON STEEL PIPING MATERIALS WITH WALL THICKNESS 3/8 INCH AND OVER SHALL
BE NORMALISED.
90 INST. CONNECTIONS LIKE ORIFICE TAPS ETC SHALL BE PROVIDED WITH DOUBLE ISOLATION VALVES.
103 ALL WELDS SHALL BE 100% RADIOGRAPHED.
104 ALL VALVE CASTINGS SHALL HAVE 100% RADIOGRAPHY.
109 ALL CS WELDED PIPES,CASTINGS & ALL TYPES OF FITTINGS INCLUDING STRAINERS SHALL HAVE CONTROL TO
HARDNESS TO 200BHN AND ALL WELD JOINTS AT SITE SHALL BE STRESS RELEIVED IF SPECIFICALLY CALLED FOR
IN P&ID "ISSUED FOR PIPING PWHT (WET H2S SERVICE)".
122 ASBESTOS FREE GASKETS AND STEM PACKING SHALL BE USED FOR ALL VALVES
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6743-6-44-0016.
203 POST WELD HEAT TREATMENT IS REQUIRED FOR WALL THICKNESS > 3/4".
208 IMPACT TEST IS REQUIRED FOR PIPING MATERIAL HAVING WALL THICKNESS > 19MM.
215 REFER 6743-6-44-0082 FOR SPECIAL REQUIREMENT FOR HYDROGEN SERVICE.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE

MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS ALL BUTTWELDED

DRAINS ON LINES <= 1.5" AS PER P&ID OR 0.75".TEE, NIPPLE, SINGLE VLV(AS PER P&ID OR
LINE ISOLATION VLV), BLIND FLG ASSEMBLY
ON LINES >= 2.0" AS PER P&ID OR 0.75".WELDOLET,NIPPLE,SINGLE VLV(AS PER
P&ID OR LINE ISOLATION VLV), BLIND FLG ASMBLY
VENTS ON LINES <= 1.5" AS PER P&ID OR 0.75".TEE, NIPPLE, SINGLE VLV(AS PER P&ID OR
LINE ISOLATION VLV), BLIND FLG ASSEMBLY
ON LINES >= 2.0" AS PER P&ID OR 0.75".WELDOLET,NIPPLE,SINGLE VLV(AS PER
P&ID OR LINE ISOLATION VLV), BLIND FLG ASMBLY
TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" TEE/WELDOLET & NIPPLE WITH DOUBLE VALVES (AS PER P&ID
OR SIMILAR TO LINE ISOLATION VALVES)

Package : IPMCS
Report No. : 50 F25A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
 JOB SPECIFICATION No.
PIPING MATERIAL
6743-018-6-44-0005
SPECIFICATION
Page 121 of 132

Client : BORL Dept./Sect. : 16/43

Project : BINA REFINERY
Location : BINA (MP) Pipe Class : F25A Sheet 2 of 4

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.
BRANCH PIPE (SIZE IN INCHES)
BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. 24.
22. 22.
20. 20.
18. 18.
16. 16.
14. 14.
12. 12.
10. 10.
8.0 8.0
6.0 6.0
5.0 5.0
4.0 T 4.0
3.5 3.5
3.0 T W 3.0
2.5 2.5
2.0 T W W 2.0
1.5 T T W W 1.5
1.25 1.25
1.0 T T W W W 1.0
0.75 T T T W W W 0.75
0.5 T T T T W W W 0.5
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package : IPMCS
Report No. : 50 F25A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
 JOB SPECIFICATION No.
PIPING MATERIAL
6743-018-6-44-0005
SPECIFICATION
Page 122 of 132

Client : BORL Dept./Sect. : 16/43

Project : BINA REFINERY
Location : BINA (MP) Pipe Class : F25A Sheet 3 of 4

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note

Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 00.500 04.000 S160 B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z7

PIP PIPE 06.000 14.000 CALC B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z7

PIP PIPE 16.000 24.000 CALC B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z7
GR.B60 CL.22
NIP NIPPLE 00.500 01.500 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z7

Flange Group
FLG FLNG.WN 00.500 24.000 M B-16.5 ASTM A 105 1500, RTJ/63AARH FWC0189Z7

FLB FLNG.BLIND 00.500 24.000 B-16.5 ASTM A 105 1500, RTJ/63AARH FBC0189Z7

FEF FLNG.FIG.8 00.500 04.000 ASME- ASTM A 105 1500, RTJ/63AARH FGK0189Z7
B16.48
FEF SPCR&BLND 06.000 24.000 ASME- ASTM A 105 1500, RTJ/63AARH FCK0189Z7
B16.48
Fitting Group
ELB90 ELBOW.90 00.500 14.000 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z17
GR.WPB
ELB90 ELBOW.90 16.000 24.000 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z17
GR.WPB-W
ELB45 ELBOW.45 00.500 14.000 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z17
GR.WPB
ELB45 ELBOW.45 16.000 24.000 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z17
GR.WPB-W
TEQ T.EQUAL 00.500 14.000 M B-16.9 ASTM A 234 BW WEG684ZZ7
GR.WPB
TEQ T.EQUAL 16.000 24.000 M B-16.9 ASTM A 234 BW WEG754ZZ7
GR.WPB-W
TRED T.RED 00.500 14.000 M, M B-16.9 ASTM A 234 BW WRG684ZZ7
GR.WPB
TRED T.RED 16.000 24.000 M, M B-16.9 ASTM A 234 BW WRG754ZZ7
GR.WPB-W
REDC REDUC.CONC 00.500 14.000 M, M B-16.9 ASTM A 234 BW WUG684ZZ7
GR.WPB
REDC REDUC.CONC 16.000 24.000 M, M B-16.9 ASTM A 234 BW WUG754ZZ7
GR.WPB-W
REDE REDUC.ECC 00.500 14.000 M, M B-16.9 ASTM A 234 BW WVG684ZZ7
GR.WPB
REDE REDUC.ECC 16.000 24.000 M, M B-16.9 ASTM A 234 BW WVG754ZZ7
GR.WPB-W
CAP CAP 00.500 24.000 M B-16.9 ASTM A 234 BW WFG684ZZ7
GR.WPB

Package : IPMCS
Report No. : 50 F25A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
 JOB SPECIFICATION No.
PIPING MATERIAL
6743-018-6-44-0005
SPECIFICATION
Page 123 of 132

Client : BORL Dept./Sect. : 16/43

Project : BINA REFINERY
Location : BINA (MP) Pipe Class : F25A Sheet 4 of 4

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note

Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
O'let Group
WLT WELDOLET 00.500 20.000 M, M MSS-SP97 ASTM A 105 BW YWS024ZZ7

Valves Group
GAV VLV.GATE 00.500 01.500 API-602 BODY-ASTM A BW, 1500, B-16.25, 51104ZZZ7
105,TRIM- SHT NO.- 51104
STELLITED,STEM-
13%CR STEEL
GAV VLV.GATE 02.000 04.000 ANSI-B- BODY-ASTM A 105 BW, 1500, B-16.25, 51704ZZZ7
16.34 /A SHT NO.- 51704
216GR.WCB,TRIM-
STELLITED,STEM-
13%CR STEEL
GLV VLV.GLOBE 00.500 01.500 BS-5352 BODY-ASTM A BW, 1500, B-16.25, 52104ZZZ7
105,TRIM- SHT NO.- 52104
STELLITED,STEM-
13%CR.STEEL
GLV VLV.GLOBE 02.000 04.000 ANSI-B- BODY-ASTM A 105 BW, 1500, B-16.25, 52704ZZZ7
16.34 /A SHT NO.- 52704
216GR.WCB,TRIM-
STELLITED,STEM-
13%CR.STEEL
CHV VLV.CHECK 00.500 01.500 BS-5352 BODY-ASTM A BW, 1500, B-16.25, 53104ZZZ7
105,TRIM- SHT NO.- 53104
STELLITED
CHV VLV.CHECK 02.000 04.000 ANSI-B- BODY-ASTM A 105 BW, 1500, B-16.25, 53704ZZZ7
16.34 /A SHT NO.- 53704
216GR.WCB,TRIM-
STELLITED
Bolt Group
BOS BOLT.STUD 00.500 24.000 B-18.2 BOLT:A193 GR.B7, BS40404Z7
NUT:A194 GR.2H
Gasket Group
GAS GASKET 00.500 24.000 B-16.20- SOFT IRON OCT-RING, 1500 GK67238Z7
ANSI B16.5
Trap/Strainer Group
PSR STRNR.PERM 00.500 01.500 M MNF'STD B:A105;INT:SS304 BW, Y-TYPE SP30345Z7

PSR STRNR.PERM 02.000 14.000 M MNF'STD B:A234GR.WPB;IN BW, T-TYPE SP33344Z7

T:SS304
PSR STRNR.PERM 16.000 24.000 M MNF'STD B:A234GR.WPBW;I BW, T-TYPE SP33644Z7
NT:SS304

Package : IPMCS
Report No. : 50 F25A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
 JOB SPECIFICATION No.
PIPING MATERIAL
6743-018-6-44-0005
SPECIFICATION
Page 124 of 132

Client : BORL Dept./Sect. : 16/43

Project : BINA REFINERY
Location : BINA (MP) Pipe Class : J2A Sheet 1 of 5

PIPE CLASS : J2A

RATING : 150
BASE MATERIAL : CS (Galv.)
CORROSION ALLOWANCE : 0 MM
SPECIAL REQUIREMENT : NON IBR

TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS

TEMP 0 38 65
PRESS 10.55 10.55 10.55

SERVICE
POTABLE WATER (ABOVE GROUND/ UNDER GROUND ),
FIRE WATER-SPRINKLER SYSTEM AFTER ORIFICE

NOTES
19 THREADED JOINTS SHALL BE MADE WITH 1" WIDTH PTFE JOINING TAPE.
20 SURFACES WHERE GALVANISING HAS BEEN BURNT OFF SHALL BE WIRE BRUSHED AND COLD GALVANISED WITH
ZINC COATING COMPOUND.
111 FOR U/G SERVICES, PIPE WALL THICKNESSES ARE CALCULATED BASED ON SOIL PARAMETERS AND BURIAL DEPTH
OF 1500MM.
122 ASBESTOS FREE GASKETS AND STEM PACKING SHALL BE USED FOR ALL VALVES
124 FOR TEMP. CONNECTION IN MS BLOCK(NHT/CCR/ISOM.) , UOP STANDARD 6-108-1 SHALL BE FOLLOWED EXCEPT
THE SIZE OF CONNECTION i.e. 1.5" INSTEAD OF SIZE 1.0" .
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6743-6-44-0016.
154 FOR PRESSURE CONNECTION USE GLOBE VALVE INSTEAD OF GATE VALVE IN ALL LINES OF MS BLOCK
(NHT/CCR/ISOM.)

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE

MAINTAINENCE 1.5" & BELOW UNIONS (SCRF) TO BE KEPT MINIMUM
JOINTS
2" & ABOVE FLANGED (SCREWED) TO BE KEPT MINIMUM

PIPE JOINTS UPTO 6" SCREWED COUPLING

DRAINS ON LINES <= 1.5" REFER EIL STD 7-44-0350, DC3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D3

VENTS ON LINES <= 1.5" REFER EIL STD 7-440350, VC3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V3

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353 (NOTE 124)

PRESS.CONN 0.75" SCRD NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD 7-44-
0354 (NOTE 154)

Package : IPMCS
Report No. : 50 J2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved