Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Hmel GGSRP Bathinda 16/43: Piping Material Specification 6922-6-44-0005 Rev. 0

Download as pdf or txt
Download as pdf or txt
You are on page 1of 81

JOB SPECIFICATION No.

PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 1 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A15A Sheet 1 of 4

PIPE CLASS : A15A


RATING : 150
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 3 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP -29 38 93 149 204 260 300
PRESS 20.03 20.03 18.28 16.17 14.06 11.95 10.44

SERVICE
LIQUID SULPHUR, SOUR GAS, SULPHUR VAPOUR; (THIS CLASS COVERS CORE PIPING ELEMENTS OF THE FULLY
JACKETED PIPING SYSTEM)

NOTES
7 FOR RESTRICTION ON USE OF BALL,PLUG & BUTTERFLY VALVES,REFER GENERAL NOTES.
53 REFER EIL STD. 6-44-0078 FOR JACKETING DETAILS.
54 ALL PIPES, VALVES AND FITTINGS SHALL BE FULLY JACKETED.
55 THIS CLASS COVERS CORE PIPING AND ITS ELEMENTS ONLY. REFER PIPING CLASS A20A FOR JACKET PIPING.
56 MODIFIED BLIND FLANGE TO CORRESPOND JACKET PIPE, EXCEPT ITS BORE WHICH IS TO SUIT CORE PIPE O.D.
57 ALL CROSSES TO BE USED IN CORE PIPE ARE TO BE SITE FABRICATED.
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS ALL BUTTWELDED

DRAINS ALL AS PER P&ID OR 1". REFER EIL STD. 6-44-0078

VENTS ALL AS PER P&ID OR 1". REFER EIL STD. 6-44-0078

TEMP.CONN 1.5" FLANGED. INSTALL AS PER EIL STD. 6-44-0078

PRESS.CONN AS PER P&ID OR 1" FLANGED WITH VALVE AS PER EIL STD. 6-44-0078

A15A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 2 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A15A Sheet 2 of 4

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.
BRANCH PIPE (SIZE IN INCHES)
BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. 24.
22. 22.
20. 20.
18. 18.
16. 16.
14. 14.
12. 12.
10. 10.
8.0 T 8.0
6.0 T T 6.0
5.0 5.0
4.0 T T W 4.0
3.5 3.5
3.0 T T W W 3.0
2.5 2.5
2.0 T T W W W 2.0
1.5 T T W W W W 1.5
1.25 1.25
1.0 T T W W W W W 1.0
0.75 T T T W W W W W 0.75
0.5 0.5
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

A15A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 3 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A15A Sheet 3 of 4

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.75 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 3.00 8.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

NIP NIPPLE 0.50 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

Flange Group
FLB FLNG.BLIND 0.75 8.00 EIL'STD ASTM A 105 150, RF/125AARH FBE0127Z0

Fitting Group
ELB90 ELBOW.90 0.75 8.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB45 ELBOW.45 0.75 8.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
TEQ T.EQUAL 0.75 8.00 M B-16.9 ASTM A 234 BW WEG684ZZ0
GR.WPB
TRED T.RED 0.75 8.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ0
GR.WPB
REDC REDUC.CONC 0.75 8.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ0
GR.WPB
REDE REDUC.ECC 0.75 8.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ0
GR.WPB
CRS CROSS 0.75 8.00 M EIL'STD ASTM A 234 BW WTK684ZZ0
GR.WPB
O'let Group
WLT WELDOLET 0.75 4.00 M, M MSS-SP97 ASTM A 105 BW YWS024ZZ0

Valves Group
GAV VLV.GATE 0.75 10.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51323ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 51323
GLV VLV.GLOBE 0.75 10.00 BS-1873 BODY-ASTM A 216 FLGD, 150, B-16.5, 52323ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 52323
CHV VLV.CHECK 0.75 10.00 BS 1868 BODY-ASTM A 216 FLGD, 150, B-16.5, 53323ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 53323
PLV VLV.PLUG 0.75 10.00 BS-5353 BODY-ASTM A 216 FLGD, 150, B-16.5, 55323ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
PLUG-HARDENED NO.- 55323
P3V VLV.3WYPLG 0.75 8.00 BS-5353 BODY-ASTM A216 FLGD, 150, B-16.5, 61323ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 61323

A15A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 4 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A15A Sheet 4 of 4

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Bolt Group
BOS BOLT.STUD 0.75 8.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.75 8.00 B-16.21- SP.WND SPIRAL, 150 GKB3172Z0
ANSI B16.5 SS316+CAF
Trap/Strainer Group

Package : IPMCS
Report No. : 50 A15A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 5 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A19A Sheet 1 of 6

PIPE CLASS : A19A


RATING : 150
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 3 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP -29 38 93 149 204 260 316 343 371
PRESS 20.03 20.03 18.28 16.17 14.06 11.95 9.84 8.78 7.73

SERVICE
NONNACE MILD CORROSIVE SOUR (OTHER THAN FLARE) & AMINE - STRESS RELIEVED;

CAUSTIC (STRESS RELIEVED ZONE), UNDERGROUND AMINE, CAUSTIC DRAINS (UPTO 14")

NOTES
7 FOR RESTRICTION ON USE OF BALL,PLUG & BUTTERFLY VALVES,REFER GENERAL NOTES.
32 CORROSION ALLOWANCE HAS BEEN ADJUSTED TO SELECT OPTIMUM SCH. REFER GENERAL NOTES TO PMS.
75 BALL VALVES SHALL NOT BE USED IN CAUSTIC SERVICE.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
107 FOR SIZE ABOVE 24"SPACER AND BLIND AS PER EIL 'STD 7-44-0162
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
213 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 125 DEG C & 5.4 KG/SQ.CM G
(FOR 32 IN), 125 DEG C & 5.4 KG/SQ.CM G (FOR 38 IN), 125 DEG C & 5.4 KG/SQ.CM G (FOR 40 IN)] AND 80% OF CLASS
CONDITIONS

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-0350, DF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-0350, VF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V4

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SW NIPPLE WITH VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
A19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 6 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A19A Sheet 2 of 6

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. T 30.
28. T R 28.
26. T R R 26.
24. T R R R 24.
22. 22.
20. T R R R R 20.
18. T R R R R R 18.
16. T R R R R R R 16.
14. T P R R R R R R 14.
12. T P P R R R R R R 12.
10. T P P P R R R R R R 10.
8.0 T P P P P R R R R R R 8.0
6.0 T P P P P P R R R R R R 6.0
5.0 5.0
4.0 T P P P P P P R R R R R R 4.0
3.5 3.5
3.0 T P P P P P P P R R R R R R 3.0
2.5 2.5
2.0 T P P P P P P P P R R R R R R 2.0
1.5 T T H H H H H H H H H H H H H H 1.5
1.25 1.25
1.0 T T H H H H H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
22.000
24.000
26.000
28.000
30.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 A19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 7 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A19A Sheet 3 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 0.75 S160 B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 1.00 1.50 XS B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 2.00 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 3.00 14.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 16.00 26.00 STD B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z0
GR.B60 CL.22
PIP PIPE 30.00 30.00 STD B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z0 32
GR.B60 CL.22
PIP PIPE 32.00 32.00 STD B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z0 213
GR.B60 CL.22
PIP PIPE 38.00 38.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z0 213
GR.B60 CL.22
PIP PIPE 40.00 40.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z0 213
GR.B60 CL.22
NIP NIPPLE 0.50 0.75 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

NIP NIPPLE 1.00 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 300, RF/125AARH FSC0147Z0

FLG FLNG.WN 0.50 24.00 M B-16.5 ASTM A 105 150, RF/125AARH FWC0127Z0

FLG FLNG.WN 26.00 48.00 M B-16.47-B ASTM A 105 150, RF/125AARH FWB0127Z0

FLG/30 FLNG.WN 2.00 24.00 M B-16.5 ASTM A 105 300, RF/125AARH FWC0147Z0
0
FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 150, RF/125AARH FBC0127Z0

FLB FLNG.BLIND 26.00 36.00 B-16.47-B ASTM A 105 150, RF/125AARH FBB0127Z0

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 150, FF/125AARH FGK0121Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 150, FF/125AARH FCK0121Z0
B16.48
FEF SPCR&BLND 26.00 36.00 EIL'STD ASTM A 516 150, FF/125AARH FCE8921Z0 107
GR.70(NORMALIS
ED)
Fitting Group
ELB90 ELBOW.90 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WA602D3Z0

Package : IPMCS
Report No. : 50 A19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 8 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A19A Sheet 4 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB90 ELBOW.90 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

ELB90 ELBOW.90 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB90 ELBOW.90 16.00 40.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z10
GR.WPB-W
ELB45 ELBOW.45 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WB602D3Z0

ELB45 ELBOW.45 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

ELB45 ELBOW.45 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
ELB45 ELBOW.45 16.00 40.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z10
GR.WPB-W
TEQ T.EQUAL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WE602D3Z0

TEQ T.EQUAL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

TEQ T.EQUAL 2.00 14.00 M B-16.9 ASTM A 234 BW WEG684ZZ0


GR.WPB
TEQ T.EQUAL 16.00 40.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WR602D3Z0

TRED T.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 14.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ0


GR.WPB
TRED T.RED 16.00 40.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ0
GR.WPB
REDC REDUC.CONC 16.00 40.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ0
GR.WPB-W
REDE REDUC.ECC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ0
GR.WPB
REDE REDUC.ECC 16.00 40.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ0
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WNH026ZZ0

SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WPH026ZZ0

CAP CAP 2.00 40.00 M B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CPLF CPLNG.FULL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WJ602D3Z0

Package : IPMCS
Report No. : 50 A19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 9 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A19A Sheet 5 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CPLF CPLNG.FULL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WK602D3Z0

CPLH CPLNG.HALF 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WL602D3Z0

CPLL CPLNG.LH 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

CPLR CPLNG.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WM602D3Z0

CPLR CPLNG.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

Valves Group
GAV VLV.GATE 0.50 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51013ZZZ0
105,TRIM- 16.11, SHT NO.- 51013
STELLITED,STEM-
SS 304
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51313ZZZ0
GR.WCB,TRIM-SS RF/125AARH, SHT
304 NO.- 51313
GLV VLV.GLOBE 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52013ZZZ0
105,TRIM- 16.11, SHT NO.- 52013
STELLITED,STEM-
SS304
GLV VLV.GLOBE 2.00 16.00 BS-1873 BODY-ASTM A 216 FLGD, 150, B-16.5, 52313ZZZ0
GR.WCB,TRIM-SS RF/125AARH, SHT
304 NO.- 52313
CHV VLV.CHECK 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53013ZZZ0
105,TRIM- 16.11, SHT NO.- 53013
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 150, B-16.5, 53313ZZZ0
GR.WCB,TRIM-SS RF/125AARH, SHT
304 NO.- 53313
BLV VLV.BALL 0.50 16.00 BS-5351 BODY-ASTM A 105 FLGD, 150, B-16.5, 54313ZZZ0 75
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 54313
BODY SEAT-
RPTFE
PLV VLV.PLUG 0.50 24.00 BS-5353 BODY-ASTM A FLGD, 150, B-16.5, 55313ZZZ0
105/ASTM A 216 RF/125AARH, SHT
GR.WCB,TRIM- NO.- 55313
PLUG-HARDENED
BFV VLV.BTRFLY 3.00 24.00 BS-5155 BODY-ASTM A 105 WAFL, 150, B-16.5, 56313ZZZ0
/A WAF/125AARH, SHT
216GR.WCB,TRIM- NO.- 56313
SS 304

Package : IPMCS
Report No. : 50 A19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 10 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A19A Sheet 6 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Valves Group
BFV VLV.BTRFLY 26.00 36.00 BS-5155 BODY-ASTM A 216 FLGD, 150, B-16.47 B, 56314ZZZ0
GR.WCB,TRIM-SS RF/125AARH, SHT
304 NO.- 56314
Bolt Group
BOS BOLT.STUD 0.50 48.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 150 GK63172Z0
ANSI B16.5 SS316+CAF
GAS GASKET 26.00 48.00 B-16.20- SP.WND SPIRAL, 150 GK56172Z0
ANSI SS316+CAF+ I
B16.47B RING
GAS/30 GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 300 GK63174Z0
0 ANSI B16.5 SS316+CAF
Trap/Strainer Group
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 14.00 M EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0 104
T:SS304
PSR STRNR.PERM 16.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304

Package : IPMCS
Report No. : 50 A19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 11 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A1A Sheet 1 of 6

PIPE CLASS : A1A


RATING : 150
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP -29 38 93 149 204 260 316 343 371
PRESS 20.03 20.03 18.28 16.17 14.06 11.95 9.84 8.78 7.73

SERVICE
NON CORROSIVE/ FLAMMABLE / NON FLAMMABLE/ NON LETHAL -PROCESS & HYDROCARBONS; LUBE OIL BEFORE
FILTER; AMMONIA, STEAM & CONDENSATE (NON IBR); UTILITIES- INST AIR (BEYOND A3A), PLANT AIR, NITROGEN,
CARBONDIOXIDE; WATER - BEYOND A3A AND A10A; IN OFFSITES ONLY BEYOND A10A; UNDERGROUND CLOSED BLOW
DOWN (UPTO 14")

NOTES
7 FOR RESTRICTION ON USE OF BALL,PLUG & BUTTERFLY VALVES,REFER GENERAL NOTES.
73 GATE VALVES OF SIZE 26" AND ABOVE SHALL BE IN ACCORDANCE WITH BS-1414 AND FLANGE ENDS SHALL BE IN
ACCORDANCE WITH ASME B16.47 SERIES B.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
107 FOR SIZE ABOVE 24"SPACER AND BLIND AS PER EIL 'STD 7-44-0162
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
210 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 65 DEG C & 13 KG/SQ.CM G
(FOR 28 IN), 234 DEG C & 9.2 KG/SQ.CM G (FOR 30 IN), 65 DEG C & 3.5 KG/SQ.CM G (FOR 36 IN), 300 DEG C & 3.5
KG/SQ.CM G (FOR 40 IN), 65 DEG C & 19 KG/SQ.CM G (FOR 48 IN)] AND 80% OF CLASS CONDITIONS

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-0350, DF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-0350, VF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V4

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SW NIPPLE WITH VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
A1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 12 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A1A Sheet 2 of 6

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. T 48.
46. T R 46.
44. T R R 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. T R R R 42.
40. T R R R R 40.
38. T R R R R R 38.
36. T R R R R R R 36.
34. T R R R R R R R 34.
32. T R R R R R R R R 32.
30. T R R R R R R R R R 30.
28. T R R R R R R R R R R 28.
26. T R R R R R R R R R R R 26.
24. T R R R R R R R R R R R R 24.
22. 22.
20. T R R R R R R R R R R R R R 20.
18. T P R R R R R R R R R R R R R 18.
16. T P P R R R R R R R R R R R R R 16.
14. T P P P R R R R R R R R R R R R R 14.
12. T P P P P R R R R R R R R R R R R R 12.
10. T P P P P P R R R R R R R R R R R R R 10.
8.0 T P P P P P P R R R R R R R R R R R R R 8.0
6.0 T P P P P P P P R R R R R R R R R R R R R 6.0
5.0 5.0
4.0 T P P P P P P P P R R R R R R R R R R R R R 4.0
3.5 3.5
3.0 T P P P P P P P P P R R R R R R R R R R R R R 3.0
2.5 2.5
2.0 T P P P P P P P P P P R R R R R R R R R R R R R 2.0
1.5 T T H H H H H H H H H H H H H H H H H H H H H H H 1.5
1.25 1.25
1.0 T T H H H H H H H H H H H H H H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H H H H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H H H H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
22.000
24.000
26.000
28.000
30.000
32.000
34.000
36.000
38.000
40.000
42.000
44.000
46.000
48.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 A1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 13 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A1A Sheet 3 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 0.75 S160 B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 1.00 1.50 XS B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 2.00 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 3.00 14.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 16.00 24.00 STD B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0
GR.B60 CL.12
PIP PIPE 28.00 28.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 210
GR.B60 CL.12
PIP PIPE 30.00 30.00 STD B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 210
GR.B60 CL.12
PIP PIPE 36.00 36.00 STD B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 210
GR.B60 CL.12
PIP PIPE 40.00 40.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 210
GR.B60 CL.12
PIP PIPE 48.00 48.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 210
GR.B60 CL.12
NIP NIPPLE 0.50 0.75 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

NIP NIPPLE 1.00 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

Flange Group
FLG FLNG.WN 0.50 24.00 M B-16.5 ASTM A 105 150, RF/125AARH FWC0127Z0

FLG FLNG.WN 26.00 48.00 M B-16.47-B ASTM A 105 150, RF/125AARH FWB0127Z0

FLG/30 FLNG.WN 0.50 1.50 M B-16.5 ASTM A 105 300, RF/125AARH FWC0147Z0
0
FLG/30 FLNG.WN 2.00 24.00 M B-16.5 ASTM A 105 300, RF/125AARH FWC0147Z0
0
FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 150, RF/125AARH FBC0127Z0

FLB FLNG.BLIND 26.00 48.00 B-16.47-B ASTM A 105 150, RF/125AARH FBB0127Z0

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 150, FF/125AARH FGK0121Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 150, FF/125AARH FCK0121Z0
B16.48
FEF SPCR&BLND 26.00 48.00 EIL'STD ASTM A 516 GR.70 150, FF/125AARH FCE6321Z0 107

Fitting Group
ELB90 ELBOW.90 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WA602D3Z0

Package : IPMCS
Report No. : 50 A1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 14 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A1A Sheet 4 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB90 ELBOW.90 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

ELB90 ELBOW.90 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB90 ELBOW.90 16.00 48.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z10
GR.WPB-W
ELB45 ELBOW.45 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WB602D3Z0

ELB45 ELBOW.45 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

ELB45 ELBOW.45 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
ELB45 ELBOW.45 16.00 48.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z10
GR.WPB-W
TEQ T.EQUAL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WE602D3Z0

TEQ T.EQUAL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

TEQ T.EQUAL 2.00 14.00 M B-16.9 ASTM A 234 BW WEG684ZZ0


GR.WPB
TEQ T.EQUAL 16.00 48.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WR602D3Z0

TRED T.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 14.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ0


GR.WPB
TRED T.RED 16.00 48.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ0
GR.WPB
REDC REDUC.CONC 16.00 48.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ0
GR.WPB-W
REDE REDUC.ECC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ0
GR.WPB
REDE REDUC.ECC 16.00 48.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ0
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WNH026ZZ0

SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WPH026ZZ0

CAP CAP 2.00 48.00 M B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CPLF CPLNG.FULL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WJ602D3Z0

Package : IPMCS
Report No. : 50 A1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 15 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A1A Sheet 5 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CPLF CPLNG.FULL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WK602D3Z0

CPLH CPLNG.HALF 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WL602D3Z0

CPLL CPLNG.LH 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

CPLR CPLNG.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WM602D3Z0

CPLR CPLNG.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

Valves Group
GAV VLV.GATE 0.25 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51001ZZZ0
105,TRIM- 16.11, SHT NO.- 51001
STELLITED,STEM-
13%CR.STEEL
GAV VLV.GATE 2.00 42.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51301ZZZ0 73
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 51301
GLV VLV.GLOBE 0.25 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52001ZZZ0
105,TRIM- 16.11, SHT NO.- 52001
STELLITED,STEM-
13%CR STEEL
GLV VLV.GLOBE 2.00 16.00 BS-1873 BODY-ASTM A 216 FLGD, 150, B-16.5, 52301ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 52301
CHV VLV.CHECK 0.25 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53001ZZZ0
105,TRIM- 16.11, SHT NO.- 53001
STELLITED
CHV VLV.CHECK 2.00 24.00 BS 1868 BODY-ASTM A 216 FLGD, 150, B-16.5, 53301ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 53301
BLV VLV.BALL 0.50 16.00 BS-5351 BODY-ASTM A 105 FLGD, 150, B-16.5, 54301ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 54301
BODY SEAT-
RPTFE
PLV VLV.PLUG 0.50 24.00 BS-5353 BODY-ASTM A 105 FLGD, 150, B-16.5, 55301ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 55301
PLUG-HARDENED
BFV VLV.BTRFLY 3.00 24.00 API-609/BS- BODY-ASTM A 105 WAFL, 150, B-16.5, 56301ZZZ0
5155 /A WAF/125AARH, SHT
216GR.WCB,TRIM- NO.- 56301
13% CR.STEEL

Package : IPMCS
Report No. : 50 A1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 16 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A1A Sheet 6 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Valves Group
BFV VLV.BTRFLY 26.00 48.00 BS-5155 BODY-ASTM A 105 FLGD, 150, B-16.47 B, 56315ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 56315
13% CR.STEEL
Bolt Group
BOS BOLT.STUD 0.50 48.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 150 GK63172Z0
ANSI B16.5 SS316+CAF
GAS GASKET 26.00 48.00 B-16.20- SP.WND SPIRAL, 150 GK56172Z0
ANSI SS316+CAF+ I
B16.47B RING
GAS/30 GASKET 2.00 24.00 B-16.20- SP.WND SPIRAL, 300 GK63174Z0
0 ANSI B16.5 SS316+CAF
Trap/Strainer Group
TRP TRAP.STEAM 0.50 1.50 MNF'STD B:A105;T:13%CR;S: FLGD, THRMDNMC, TR3065530
SS304 150,RF/125AARH
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 14.00 M EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0 104
T:SS304
PSR STRNR.PERM 16.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304

Package : IPMCS
Report No. : 50 A1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 17 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A22A Sheet 1 of 6

PIPE CLASS : A22A


RATING : 150
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT : IBR SERVICE

TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS


TEMP 0 38 93 149 204 260 316 343 371
PRESS 20.03 20.03 18.28 16.17 14.06 11.95 9.84 8.79 7.73

SERVICE
HYDROCARBON,STEAM (IBR), BOILER FEED WATER (IBR) & CONDENSATE (IBR)

NOTES
7 FOR RESTRICTION ON USE OF BALL,PLUG & BUTTERFLY VALVES,REFER GENERAL NOTES.
8 ALL PIPES,FITTINGS,VALVES,FLANGES,TRAPS AND STRAINERS SHALL BE TESTED AND TEST CERTIFICATE IN FORM
III A FOR PIPE AND FORM III C FOR OTHERS SHALL BE REQD. DULY COUNTERSIGNED BY IBR AUTHORITY OR ITS
APPROVED REPRESENTATIVE.
9 CARBON CONTENT SHALL NOT EXCEED 0.25% FOR ALL PIPES,FITTINGS FLANGES ETC. THAT MAY REQUIRE
WELDING. MOREOVER,FOR FLANGES THE SULPHUR AND PHOSPHOROUS SHALL ALSO BE LIMITED TO 0.05% EACH.
73 GATE VALVES OF SIZE 26" AND ABOVE SHALL BE IN ACCORDANCE WITH BS-1414 AND FLANGE ENDS SHALL BE IN
ACCORDANCE WITH ASME B16.47 SERIES B.
107 FOR SIZE ABOVE 24"SPACER AND BLIND AS PER EIL 'STD 7-44-0162
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-0350, DF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-0350, VF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V4

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SW NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
A22A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 18 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A22A Sheet 2 of 6

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. T 36.
34. T R 34.
32. T R R 32.
30. T R R R 30.
28. T R R R R 28.
26. T R R R R R 26.
24. T R R R R R R 24.
22. 22.
20. T R R R R R R R 20.
18. T P R R R R R R R 18.
16. T P P R R R R R R R 16.
14. T P P P R R R R R R R 14.
12. T P P P P R R R R R R R 12.
10. T P P P P P R R R R R R R 10.
8.0 T P P P P P P R R R R R R R 8.0
6.0 T P P P P P P P R R R R R R R 6.0
5.0 5.0
4.0 T P P P P P P P P R R R R R R R 4.0
3.5 3.5
3.0 T P P P P P P P P P R R R R R R R 3.0
2.5 2.5
2.0 T P P P P P P P P P P R R R R R R R 2.0
1.5 T T H H H H H H H H H H H H H H H H H 1.5
1.25 1.25
1.0 T T H H H H H H H H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
22.000
24.000
26.000
28.000
30.000
32.000
34.000
36.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 A22A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 19 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A22A Sheet 3 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 0.75 S160 B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z1

PIP PIPE 1.00 1.50 XS B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z1

PIP PIPE 2.00 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z1

PIP PIPE 3.00 14.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z1

PIP PIPE 16.00 36.00 STD B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z1
GR.B60 CL.12
NIP NIPPLE 0.50 0.75 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z1

NIP NIPPLE 1.00 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z1

Flange Group
FLG FLNG.WN 0.50 20.00 M B-16.5 ASTM A 105 150, RF/125AARH FWC0127Z1

FLG FLNG.WN 22.00 22.00 M MSS-SP44 ASTM A 105 150, RF/125AARH FWH0127Z1

FLG FLNG.WN 24.00 24.00 M B-16.5 ASTM A 105 150, RF/125AARH FWC0127Z1

FLG FLNG.WN 26.00 36.00 M B-16.47-B ASTM A 105 150, RF/125AARH FWB0127Z1

FLB FLNG.BLIND 0.50 20.00 B-16.5 ASTM A 105 150, RF/125AARH FBC0127Z1

FLB FLNG.BLIND 22.00 22.00 MSS-SP44 ASTM A 105 150, RF/125AARH FBH0127Z1

FLB FLNG.BLIND 24.00 24.00 B-16.5 ASTM A 105 150, RF/125AARH FBC0127Z1

FLB FLNG.BLIND 26.00 36.00 B-16.47-B ASTM A 105 150, RF/125AARH FBB0127Z1

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 150, FF/125AARH FGK0121Z1
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 150, FF/125AARH FCK0121Z1
B16.48
FEF SPCR&BLND 26.00 36.00 EIL'STD ASTM A 516 GR.70 150, FF/125AARH FCE6321Z1 107

Fitting Group
ELB90 ELBOW.90 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WA602D3Z1

ELB90 ELBOW.90 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z1

ELB90 ELBOW.90 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z11
GR.WPB
ELB90 ELBOW.90 16.00 36.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z11
GR.WPB-W

Package : IPMCS
Report No. : 50 A22A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 20 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A22A Sheet 4 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB45 ELBOW.45 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WB602D3Z1

ELB45 ELBOW.45 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z1

ELB45 ELBOW.45 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z11
GR.WPB
ELB45 ELBOW.45 16.00 36.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z11
GR.WPB-W
TEQ T.EQUAL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WE602D3Z1

TEQ T.EQUAL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z1

TEQ T.EQUAL 2.00 14.00 M B-16.9 ASTM A 234 BW WEG684ZZ1


GR.WPB
TEQ T.EQUAL 16.00 36.00 M B-16.9 ASTM A 234 BW WEG754ZZ1
GR.WPB-W
TRED T.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WR602D3Z1

TRED T.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z1

TRED T.RED 2.00 14.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ1


GR.WPB
TRED T.RED 16.00 36.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ1
GR.WPB-W
REDC REDUC.CONC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ1
GR.WPB
REDC REDUC.CONC 16.00 36.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ1
GR.WPB-W
REDE REDUC.ECC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ1
GR.WPB
REDE REDUC.ECC 16.00 36.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ1
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WNH026ZZ1

SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WPH026ZZ1

CAP CAP 0.50 0.75 B-16.11 ASTM A 105 SCRF, 6000 WF60283Z1

CAP CAP 1.00 1.50 B-16.11 ASTM A 105 SCRF, 3000 WF60282Z1

CAP CAP 2.00 36.00 M B-16.9 ASTM A 234 BW WFG684ZZ1


GR.WPB
CPLF CPLNG.FULL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WJ602D3Z1

CPLF CPLNG.FULL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z1

Package : IPMCS
Report No. : 50 A22A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 21 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A22A Sheet 5 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CPLH CPLNG.HALF 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WK602D3Z1

CPLH CPLNG.HALF 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z1

CPLL CPLNG.LH 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WL602D3Z1

CPLL CPLNG.LH 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z1

CPLR CPLNG.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WM602D3Z1

CPLR CPLNG.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z1

Valves Group
GAV VLV.GATE 0.50 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51002ZZZ1
105,TRIM- 16.11, SHT NO.- 51002
STELLITED,STEM-
13%CR STEEL
GAV VLV.GATE 2.00 36.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51302ZZZ1 73
GR.WCB,TRIM- RF/125AARH, SHT
13% CR STEEL NO.- 51302
GLV VLV.GLOBE 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52002ZZZ1
105,TRIM- 16.11, SHT NO.- 52002
STELLITED,STEM-
13%CR.STEEL
GLV VLV.GLOBE 2.00 16.00 BS-1873 BODY-ASTM A 216 FLGD, 150, B-16.5, 52302ZZZ1
GR.WCB,TRIM- RF/125AARH, SHT
13% CR STEEL NO.- 52302
CHV VLV.CHECK 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53002ZZZ1
105,TRIM- 16.11, SHT NO.- 53002
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 150, B-16.5, 53302ZZZ1
GR.WCB,TRIM- RF/125AARH, SHT
13% CR STEEL NO.- 53302
G3V VLV.PISTON 0.50 1.50 MNF'STD BODY-ASTM A SW, 800, 3000, B- 64092ZZZ1
105,TRIM-13% 16.11, SHT NO.- 64092
CR.STEEL
Bolt Group
BOS BOLT.STUD 0.50 36.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 20.00 B-16.20- SP.WND SPIRAL, 150 GK63172Z0
ANSI B16.5 SS316+CAF
GAS GASKET 22.00 22.00 B-16.20- SP.WND SPIRAL, 150 GK83172Z0
MSS-SP-44 SS316+CAF
GAS GASKET 24.00 24.00 B-16.20- SP.WND SPIRAL, 150 GK63172Z0
ANSI B16.5 SS316+CAF

Package : IPMCS
Report No. : 50 A22A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 22 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A22A Sheet 6 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Gasket Group
GAS GASKET 26.00 48.00 B-16.20- SP.WND SPIRAL, 150 GK56172Z0
ANSI SS316+CAF+ I
B16.47B RING
Trap/Strainer Group
TRP TRAP.STEAM 0.50 1.50 MNF'STD B:A105;T:13%CR;S: FLGD, THRMDNMC, TR3065531
SS304 150,RF/125AARH
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D511

PSR STRNR.PERM 2.00 24.00 MNF'STD B:A216GR.WCB;IN FLGD, Y-TYPE, SP3805531


T:SS304 150,RF/125AARH

Package : IPMCS
Report No. : 50 A22A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 23 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A3A Sheet 1 of 5

PIPE CLASS : A3A


RATING : 150
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP 0 38 50 65 100 150 186
PRESS 10.55 10.55 10.55 10.55 10.55 10.55 10.55

SERVICE
NON CORROSIVE UTILITIES (ABOVE GROUND) CATEGORY "D" FLUID - RAW WATER, SERVICE WATER, INSTRUMENT
AIR(2" & ABOVE), PLANT AIR, INERT GAS, CARBON DI OXIDE (DRY), NITROGEN, CONDENSATE & BOILER FEED SUCTION
(NON IBR). THIS CLASS DOES NOT COVER UNDERGROUND PIPING AND THE FIRE WATER SERVICE.

NOTES
6 FOR FABRICATED REDUCERS,REFER EIL'STD 7-44-0485 & 7-44-0487. FOR MITRES, REFER EIL'STD 7-44-0033.
10 USE 4-PIECE 90 DEG. MITRE FOR 8" & 10", 5-PIECE 90 DEG. MITRE FOR SIZES FROM 12" TO 54" AND 6-PIECE 90 DEG.
MITRE FOR SIZES 56" TO 80".(45 DEG. MITRE SHALL REQUIRE ONE PIECE LESS.)
31 USE BUTTERFLY VALVES INSTEAD OF GATE VALVES FROM 10" ONWARDS IN WATER SERVICE AND UPTO 70 DEG C.
DESIGN PRESSURE FOR BUTTERFLY VALVES IS LIMITED UPTO 10 BAR.
86 BUTTERFLY VALVES FOR THE SPEC ARE PN10 RATED WITH A MAXIMUM PRESSURE OF 10.2 KG/CM2G.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING 3000 LBS.

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-350, DF3

ON LINES >= 2.0" 0.75" OR AS PER P&ID. REFER EIL STD. 7-44-351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-350, VC1

ON LINES >= 2.0" 0.75" OR AS PER P&ID. REFER EIL STD 7-44-351, V1

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-353

PRESS.CONN 0.75" SW, SH HVY NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD
7-44-354

Package
Report No.
: IPMCS
: 50
A3A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 24 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A3A Sheet 2 of 5

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. T 24.
22. 22.
20. T R 20.
18. T P R 18.
16. T R P R 16.
14. T P R P R 14.
12. T P P R P R 12.
10. T R P P R P R 10.
8.0 T P R P P R P R 8.0
6.0 T P P R P P R P R 6.0
5.0 5.0
4.0 T P P P P P P P P R 4.0
3.5 3.5
3.0 T P P P P P P P P P R 3.0
2.5 2.5
2.0 T P P P P P P P P P P P 2.0
1.5 T T H H H H H H H H H H H 1.5
1.25 1.25
1.0 T T H H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
22.000
24.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 A3A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 25 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A3A Sheet 3 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 1.50 HVY IS-1239-I IS-1239 (BLACK) PE, C.WELDED PI6D471Z0

PIP PIPE 2.00 6.00 HVY IS-1239-I IS-1239 (BLACK) BE, C.WELDED PI6D411Z0

PIP PIPE 8.00 12.00 6.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 14.00 18.00 8.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 20.00 24.00 10.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

NIP NIPPLE 0.50 1.50 HVY IS-1239-I IS-1239 (BLACK) PBE, C.WELDED PN6D461Z0

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 150, RF/125AARH FSC0127Z0

FLG FLNG.SO 2.00 24.00 B-16.5 ASTM A 105 150, RF/125AARH FNC0127Z0

FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 150, RF/125AARH FBC0127Z0

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 150, FF/125AARH FGK0121Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 150, FF/125AARH FCK0121Z0
B16.48
Fitting Group
ELB90 ELBOW.90 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

ELB90 ELBOW.90 2.00 6.00 STD B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB45 ELBOW.45 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

ELB45 ELBOW.45 2.00 6.00 STD B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
MIT90 MITRE.90 8.00 24.00 M EIL'STD IS-3589 GR.330 BW, 1.5D WDKF141Z0

MIT45 MITRE.45 8.00 24.00 M EIL'STD IS-3589 GR.330 BW, 1.5D WGKF141Z0

TEQ T.EQUAL 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

TEQ T.EQUAL 2.00 6.00 STD B-16.9 ASTM A 234 BW WEG684ZZ0


GR.WPB
TEQ T.EQUAL 8.00 24.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 6.00 STD, B-16.9 ASTM A 234 BW WRG684ZZ0


STD GR.WPB

Package : IPMCS
Report No. : 50 A3A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 26 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A3A Sheet 4 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
TRED T.RED 8.00 24.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 6.00 STD, B-16.9 ASTM A 234 BW WUG684ZZ0
STD GR.WPB
REDC REDUC.CONC 8.00 24.00 M, M EIL'STD IS-3589 GR.330 BW WUKF14ZZ0

REDE REDUC.ECC 2.00 6.00 STD, B-16.9 ASTM A 234 BW WVG684ZZ0


STD GR.WPB
REDE REDUC.ECC 8.00 24.00 M, M EIL'STD IS-3589 GR.330 BW WVKF14ZZ0

SWGC SWAGE.CONC 0.50 3.00 STD, BS-3799 ASTM A 105 PBE WNH026ZZ0
STD
SWGE SWAGE.ECC 0.50 3.00 STD, BS-3799 ASTM A 105 PBE WPH026ZZ0
STD
CAP CAP 0.50 1.50 B-16.11 ASTM A 105 SCRF, 3000 WF60282Z0

CAP CAP 2.00 6.00 STD B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CAP CAP 8.00 24.00 M B-16.9 ASTM A 234 BW WFG684ZZ0
GR.WPB
CPLF CPLNG.FULL 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

CPLR CPLNG.RED 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

UNN UNION 0.50 1.50 BS-3799 ASTM A 105 SW, 3000 WQH02D2Z0

Valves Group
GAV VLV.GATE 0.25 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51001ZZZ0
105,TRIM- 16.11, SHT NO.- 51001
STELLITED,STEM-
13%CR.STEEL
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 51321
GLV VLV.GLOBE 0.25 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52001ZZZ0
105,TRIM- 16.11, SHT NO.- 52001
STELLITED,STEM-
13%CR STEEL
GLV VLV.GLOBE 2.00 16.00 BS-1873 BODY-ASTM A 216 FLGD, 150, B-16.5, 52321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 52321
CHV VLV.CHECK 0.25 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53001ZZZ0
105,TRIM- 16.11, SHT NO.- 53001
STELLITED

Package : IPMCS
Report No. : 50 A3A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 27 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A3A Sheet 5 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Valves Group
CHV VLV.CHECK 2.00 24.00 BS 1868 BODY-ASTM A 216 FLGD, 150, B-16.5, 53321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 53321
BLV VLV.BALL 0.50 16.00 BS-5351 BODY-ASTM A 105 FLGD, 150, B-16.5, 54321ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 54321
BODY SEAT-
RPTFE
BFV VLV.BTRFLY 3.00 24.00 BS-5155 BODY-ASTM A 216 WAFL, 150, B-16.5, 56321ZZZ0
GR.WCB,TRIM- WAF/125AARH, SHT
13% CR.STEEL NO.- 56321
Bolt Group
BOS BOLT.STUD 18.00 24.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
BOM BOLT.M/C 0.50 16.00 B-18.2 BOLT:A307 GR.B, BM41418Z0
NUT:A563 GR.B
Gasket Group
GAS GASKET 0.50 24.00 B-16.21- IS-2712-GR.W/3 RING, 150, 2 MM GKB1052Z0
ANSI B16.5
Trap/Strainer Group
TRP TRAP.STEAM 0.50 1.50 MNF'STD B:A105;T:13%CR;S: FLGD, THRMDNMC, TR3065530
SS304 150,RF/125AARH
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 6.00 M EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0 104
T:SS304
PSR STRNR.PERM 8.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304

Package : IPMCS
Report No. : 50 A3A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 28 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A91A Sheet 1 of 7

PIPE CLASS : A91A


RATING : 150
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP 38 50 65
PRESS 10.55 10.55 10.55

SERVICE
CATEGORY 'D' FLUID-A/G & U/G COOLING WATER, U/G BEARING COOLING WATER RETURN.

NOTES
6 FOR FABRICATED REDUCERS,REFER EIL'STD 7-44-0485 & 7-44-0487. FOR MITRES, REFER EIL'STD 7-44-0033.
10 USE 4-PIECE 90 DEG. MITRE FOR 8" & 10", 5-PIECE 90 DEG. MITRE FOR SIZES FROM 12" TO 44" AND 6-PIECE 90 DEG.
MITRE FOR SIZES 48" TO 82"(45 DEG. MITRE SHALL REQUIRE ONE PIECE LESS). FOR 60" SIZE, 10% CORROSION
ALLOWANCE IS ADJUSTED.
64 AWWA C207 CL.D FLANGES SHALL BE OF HUB TYPE.
65 FORGINGS ARE ACCEPTABLE IN LIEU OF PLATE MATERIAL FOR BLIND FLANGES AND SPACER & BLINDS.
86 BUTTERFLY VALVES FOR THE SPEC ARE PN10 RATED WITH A MAXIMUM PRESSURE OF 10.2 KG/CM2G.
102 FOR U/G SERVICES, PIPE WALL THICKNESSES ARE CALCULATED BASED ON SOIL PARAMETERS AND BURIAL DEPTH
OF 1500 MM FOR SIZES UP TO 40" AND 1000MM FOR SIZES 42" & ABOVE.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
105 FOR SIZES ABOVE 30", TEMPERATURE AND PRESSURE RATINGS SHALL BE 65 DEG.C & 7.0 KG/CM2G RESPECTIVELY.
107 FOR SIZE ABOVE 24"SPACER AND BLIND AS PER EIL 'STD 7-44-0162
110 MITRES ARE ALSO ACCEPTABLE IN PLACE OF ELBOWS FOR SIZES 8" TO 24"
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
214 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 65 DEG C & 7.6 KG/SQ.CM G
(FOR 36 IN)] AND 80% OF CLASS CONDITIONS

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING 3000 LBS.

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-350, DF3

ON LINES >= 2.0" 0.75" OR AS PER P&ID. REFER EIL STD. 7-44-351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-350, VC1

ON LINES >= 2.0" 0.75" OR AS PER P&ID. REFER EIL STD 7-44-351, V1

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-353

PRESS.CONN 0.75" SW, SH HVY NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD
7-44-354

Package
Report No.
: IPMCS
: 50
A91A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 29 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A91A Sheet 2 of 7

72.
70.
68.
66. T
64. T R
62. T R R
60. T R R R
58. T R R R R
56. T R R R R R
54. T R R R R R R
52. T R R R R R R R
50. T R R R R R R R R
48. T R R R R R R R R R
46. T R R R R R R R R R R
44. T R R R R R R R R R R R
BRANCH PIPE ( SIZE IN INCHES)

42. T R R R R R R R R R R R R
40. T R R R R R R R R R R R R R
38. T R R R R R R R R R R R R R R
36. T R R R R R R R R R R R R R R R
34. T R R R R R R R R R R R R R R R R
32. T R R R R R R R R R R R R R R R R R
30. T R R R R R R R R R R R R R R R R R R
28. T R R R R R R R R R R R R R R R R R R R
26. T R R R R R R R R R R R R R R R R R R R R
24. T R R R R R R R R R R R R R R R R R R R R R
22.
20. T R R R R R R R R R R R R R R R R R R R R R R
18. T R R R R R R R R R R R R R R R R R R R R R R R
16. T R R R R R R R R R R R R R R R R R R R R R R R R
14. T R R R R R R R R R R R R R R R R R R R R R R R R R
12. T R R R R R R R R R R R R R R R R R R R R R R R R R R
10. T R R R R R R R R R R R R R R R R R R R R R R R R R R R
8.0 T R R R R R R R R R R R R R R R R R R R R R R R R R R R R
6.0 T R R R R R R R R R R R R R R R R R R R R R R R R R R R R R
5.0
4.0 T R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R
3.5
3.0 T P R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R
2.5
2.0 T P P R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R
1.5 T T H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
1.25 H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
1.0 T T H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
0.75 T T T H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
0.5 T T T T H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
10.000
12.000
14.000
16.000
18.000
20.000
22.000
24.000
26.000
28.000
30.000
32.000
34.000
36.000
38.000
40.000
42.000
44.000
46.000
48.000
50.000
52.000
54.000
56.000
58.000
60.000
62.000
64.000
66.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 A91A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 30 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A91A Sheet 3 of 7

T 72.
T R 70.
T R R 68.
R R R 66.
R R R 64.
R R R 62.
R R R 60.
R R R 58.
R R R 56.
R R R 54.
R R R 52.
R R R 50.
R R R 48.
R R R 46.
R R R 44.
BRANCH PIPE (SIZE IN INCHES)

R R R 42.
R R R 40.
R R R 38.
R R R 36.
R R R 34.
R R R 32.
R R R 30.
R R R 28.
R R R 26.
R R R 24.
22.
R R R 20.
R R R 18.
R R R 16.
R R R 14.
R R R 12.
R R R 10.
R R R 8.0
R R R 6.0
5.0
R R R 4.0
3.5
R R R 3.0
2.5
R R R 2.0
H H H 1.5
H H H 1.25
H H H 1.0
H H H 0.75
H H H 0.5
68.000
70.000
72.000

Package
Report No.
: IPMCS
: 50 A91A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 31 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A91A Sheet 4 of 7

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 1.50 HVY IS-1239-I IS-1239 (BLACK) PE, C.WELDED PI6D471Z0

PIP PIPE 2.00 6.00 HVY IS-1239-I IS-1239 (BLACK) BE, C.WELDED PI6D411Z0

PIP PIPE 8.00 12.00 6.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 14.00 18.00 8.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 20.00 24.00 10.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 36.00 36.00 STD IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0 105

PIP PIPE 50.00 60.00 14.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0 105

PIP PIPE 62.00 64.00 16.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0 105

PIP PIPE 66.00 72.00 16.0 IS-3589 IS-3589 GR.410 BE, WELDED PI7E319Z0 105

PIP PIPE 74.00 82.00 18.0 IS-3589 IS-3589 GR.410 BE, WELDED PI7E319Z0 105

NIP NIPPLE 0.50 1.50 M IS-1239-I IS-1239 (BLACK) PBE, C.WELDED PN6D461Z0

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 150, RF/125AARH FSC0127Z0

FLG/30 FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 300, RF/125AARH FSC0147Z0
0
FLG FLNG.SO 2.00 24.00 B-16.5 ASTM A 105 150, RF/125AARH FNC0127Z0

FLG FLNG.SO 26.00 82.00 AWWA-C207 ASTM A 105 150, FF/125AARH FN40121Z0
CL.D
FLG/30 FLNG.SO 2.00 24.00 B-16.5 ASTM A 105 300, RF/125AARH FNC0147Z0
0
FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 150, RF/125AARH FBC0127Z0

FLB FLNG.BLIND 26.00 82.00 AWWA-C207 ASTM A 285 GR.C 150, FF/125AARH FB45321Z0
CL.D
FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 150, FF/125AARH FGK0121Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 150, FF/125AARH FCK0121Z0
B16.48
FEF SPCR&BLND 26.00 82.00 EIL'STD ASTM A 285 GR.C 150, FF/125AARH FCE5321Z0 107

Fitting Group
ELB90 ELBOW.90 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

Package : IPMCS
Report No. : 50 A91A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 32 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A91A Sheet 5 of 7

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB90 ELBOW.90 2.00 6.00 STD B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB90 ELBOW.90 8.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z10 110
GR.WPB-W
ELB45 ELBOW.45 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

ELB45 ELBOW.45 2.00 6.00 STD B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
ELB45 ELBOW.45 8.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z10 110
GR.WPB-W
MIT90 MITRE.90 26.00 64.00 M EIL'STD IS-3589 GR.330 BW, 1.5D WDKF141Z0

MIT90 MITRE.90 66.00 82.00 M EIL'STD IS-3589 GR.410 BW, 1.5D WDKF241Z0

MIT45 MITRE.45 26.00 64.00 M EIL'STD IS-3589 GR.330 BW, 1.5D WGKF141Z0

MIT45 MITRE.45 66.00 82.00 M EIL'STD IS-3589 GR.410 BW, 1.5D WGKF241Z0

TEQ T.EQUAL 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

TEQ T.EQUAL 2.00 6.00 STD B-16.9 ASTM A 234 BW WEG684ZZ0


GR.WPB
TEQ T.EQUAL 8.00 48.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 6.00 STD, B-16.9 ASTM A 234 BW WRG684ZZ0


STD GR.WPB
TRED T.RED 8.00 48.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 6.00 STD, B-16.9 ASTM A 234 BW WUG684ZZ0
STD GR.WPB
REDC REDUC.CONC 8.00 64.00 M, M EIL'STD IS-3589 GR.330 BW WUKF14ZZ0

REDC REDUC.CONC 66.00 82.00 M, M EIL'STD IS-3589 GR.410 BW WUKF24ZZ0

REDE REDUC.ECC 2.00 6.00 STD, B-16.9 ASTM A 234 BW WVG684ZZ0


STD GR.WPB
REDE REDUC.ECC 8.00 64.00 M, M EIL'STD IS-3589 GR.330 BW WVKF14ZZ0

REDE REDUC.ECC 66.00 82.00 M, M EIL'STD IS-3589 GR.410 BW WVKF24ZZ0

SWGC SWAGE.CONC 0.50 3.00 STD, BS-3799 ASTM A 105 PBE WNH026ZZ0
STD
SWGE SWAGE.ECC 0.50 3.00 STD, BS-3799 ASTM A 105 PBE WPH026ZZ0
STD

Package : IPMCS
Report No. : 50 A91A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 33 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A91A Sheet 6 of 7

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CAP CAP 0.50 1.50 B-16.11 ASTM A 105 SCRF, 3000 WF60282Z0

CAP CAP 2.00 6.00 STD B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CAP CAP 8.00 48.00 M B-16.9 ASTM A 234 BW WFG684ZZ0
GR.WPB
CAP CAP 50.00 82.00 CALC ASME-VIII ASTM A 285 GR.C BW WF3J54ZZ0

CPLF CPLNG.FULL 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

CPLR CPLNG.RED 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

UNN UNION 0.50 1.50 BS-3799 ASTM A 105 SW, 3000 WQH02D2Z0

Valves Group
GAV VLV.GATE 0.25 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51001ZZZ0
105,TRIM- 16.11, SHT NO.- 51001
STELLITED,STEM-
13%CR.STEEL
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 51321
GAV VLV.GATE 26.00 42.00 BS-1414 BODY-ASTM A 216 FLGD, 150, 51920ZZZ0
GR.WCB,TRIM- AWWAC207,
13% CR.STEEL FF/125AARH, SHT
NO.- 51920
GLV VLV.GLOBE 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52001ZZZ0
105,TRIM- 16.11, SHT NO.- 52001
STELLITED,STEM-
13%CR STEEL
GLV VLV.GLOBE 2.00 16.00 BS-1873 BODY-ASTM A 216 FLGD, 150, B-16.5, 52321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 52321
CHV VLV.CHECK 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53001ZZZ0
105,TRIM- 16.11, SHT NO.- 53001
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 150, B-16.5, 53321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 53321
CHV VLV.CHECK 26.00 48.00 API-594 BODY-ASTM A 216 FLGD, 150, 53316ZZZ0
GR.WCB,TRIM- AWWAC207,
13% CR.STEEL FF/125AARH, SHT
NO.- 53316

Package : IPMCS
Report No. : 50 A91A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 34 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A91A Sheet 7 of 7

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Valves Group
BLV VLV.BALL 0.50 16.00 BS-5351 BODY-ASTM A 105 FLGD, 150, B-16.5, 54321ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 54321
BODY SEAT-
RPTFE
PLV VLV.PLUG 0.50 8.00 BS-5353 BODY-ASTM A 105 FLGD, 150, B-16.5, 55397ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 55397
PLUG-HARDENED
BFV VLV.BTRFLY 3.00 24.00 BS-5155 BODY-ASTM A 216 WAFL, 150, B-16.5, 56321ZZZ0
GR.WCB,TRIM- WAF/125AARH, SHT
13% CR.STEEL NO.- 56321
BFV VLV.BTRFLY 26.00 48.00 BS-5155 BODY-ASTM A 216 FLGD, 150, 56316ZZZ0
GR.WCB,TRIM- AWWAC207,
13% CR.STEEL FF/125AARH, SHT
NO.- 56316
Bolt Group
BOS BOLT.STUD 18.00 82.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
BOM BOLT.M/C 0.50 16.00 B-18.2 BOLT:A307 GR.B, BM41418Z0
NUT:A563 GR.B
Gasket Group
GAS GASKET 0.50 24.00 B-16.21- IS-2712-GR.W/3 RING, 150, 2 MM GKB1052Z0
ANSI B16.5
GAS GASKET 26.00 82.00 AWWA-C207 IS-2712-GR.W/3 FULLFACE, 150, 2 MM GK21022Z0
CL.D
GAS/30 GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 300 GK63174Z0
0 ANSI B16.5 SS316+CAF
Trap/Strainer Group
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 6.00 STD EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0 104
T:SS304
PSR STRNR.PERM 8.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304
PSR STRNR.PERM 26.00 48.00 M MNF'STD B:A234GR.WPBW;I BW, T-TYPE SP33644Z0
NT:SS304

Package : IPMCS
Report No. : 50 A91A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 35 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A94A Sheet 1 of 6

PIPE CLASS : A94A


RATING : 150
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP 0 38 50 65
PRESS 10.55 10.55 10.55 10.55

SERVICE
CATEGORY 'D' FLUID-U/G AND A/G CRWS / SS

NOTES
6 FOR FABRICATED REDUCERS,REFER EIL'STD 7-44-0485 & 7-44-0487. FOR MITRES, REFER EIL'STD 7-44-0033.
10 USE 4-PIECE 90 DEG. MITRE FOR 8" & 10", 5-PIECE 90 DEG. MITRE FOR SIZES FROM 12" TO 54" AND 6-PIECE 90 DEG.
MITRE FOR SIZES 56" TO 80".(45 DEG. MITRE SHALL REQUIRE ONE PIECE LESS.)
64 AWWA C207 CL.D FLANGES SHALL BE OF HUB TYPE.
65 FORGINGS ARE ACCEPTABLE IN LIEU OF PLATE MATERIAL FOR BLIND FLANGES AND SPACER & BLINDS.
86 BUTTERFLY VALVES FOR THE SPEC ARE PN10 RATED WITH A MAXIMUM PRESSURE OF 10.2 KG/CM2G.
101 FOR U/G SERVICES, PIPE WALL THICKNESSES ARE CALCULATED BASED ON SOIL PERAMETERS AND BURIAL DEPTH
OF 2500MM.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
107 FOR SIZE ABOVE 24"SPACER AND BLIND AS PER EIL 'STD 7-44-0162
110 MITRES ARE ALSO ACCEPTABLE IN PLACE OF ELBOWS FOR SIZES 8" TO 24"
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING 3000 LBS.

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-350, DF3

ON LINES >= 2.0" 0.75" OR AS PER P&ID. REFER EIL STD. 7-44-351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-350, VC1

ON LINES >= 2.0" 0.75" OR AS PER P&ID. REFER EIL STD 7-44-351, V1

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-353

PRESS.CONN 0.75" SW, SH HVY NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD
7-44-354

Package
Report No.
: IPMCS
: 50
A94A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 36 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A94A Sheet 2 of 6

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. T 36.
34. T R 34.
32. T R R 32.
30. T R R R 30.
28. T R R R R 28.
26. T R R R R R 26.
24. T R R R R R R 24.
22. 22.
20. T R R R R R R R 20.
18. T R R R R R R R R 18.
16. T R R R R R R R R R 16.
14. T R R R R R R R R R R 14.
12. T R R R R R R R R R R R 12.
10. T R R R R R R R R R R R R 10.
8.0 T R R R R R R R R R R R R R 8.0
6.0 T R R R R R R R R R R R R R R 6.0
5.0 5.0
4.0 T R R R R R R R R R R R R R R R 4.0
3.5 3.5
3.0 T P R R R R R R R R R R R R R R R 3.0
2.5 2.5
2.0 T P P R R R R R R R R R R R R R R R 2.0
1.5 T T H H H H H H H H H H H H H H H H H 1.5
1.25 H H 1.25
1.0 T T H H H H H H H H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
22.000
24.000
26.000
28.000
30.000
32.000
34.000
36.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 A94A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 37 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A94A Sheet 3 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 1.50 HVY IS-1239-I IS-1239 (BLACK) PE, C.WELDED PI6D471Z0

PIP PIPE 2.00 6.00 HVY IS-1239-I IS-1239 (BLACK) BE, C.WELDED PI6D411Z0

PIP PIPE 8.00 10.00 6.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 12.00 16.00 8.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 18.00 20.00 10.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 24.00 28.00 12.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

PIP PIPE 30.00 36.00 14.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7D919Z0

NIP NIPPLE 0.50 1.50 HVY IS-1239-I IS-1239 (BLACK) PBE, C.WELDED PN6D461Z0

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 150, RF/125AARH FSC0127Z0

FLG FLNG.SO 2.00 24.00 B-16.5 ASTM A 105 150, RF/125AARH FNC0127Z0 64

FLG FLNG.SO 26.00 32.00 AWWA-C207 ASTM A 105 150, FF/125AARH FN40121Z0
CL.D
FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 150, RF/125AARH FBC0127Z0

FLB FLNG.BLIND 26.00 36.00 AWWA-C207 ASTM A 285 GR.C 150, FF/125AARH FB45321Z0 65
CL.D
FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 150, FF/125AARH FGK0121Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 150, FF/125AARH FCK0121Z0
B16.48
FEF SPCR&BLND 26.00 36.00 EIL'STD ASTM A 285 GR.C 150, FF/125AARH FCE5321Z0

Fitting Group
ELB90 ELBOW.90 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

ELB90 ELBOW.90 2.00 6.00 STD B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB90 ELBOW.90 8.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z10 110
GR.WPB-W
ELB45 ELBOW.45 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

ELB45 ELBOW.45 2.00 6.00 STD B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
ELB45 ELBOW.45 8.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z10 110
GR.WPB-W

Package : IPMCS
Report No. : 50 A94A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 38 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A94A Sheet 4 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
MIT90 MITRE.90 26.00 36.00 M EIL'STD IS-3589 GR.330 BW, 1.5D WDKF141Z0

MIT45 MITRE.45 26.00 36.00 M EIL'STD IS-3589 GR.330 BW, 1.5D WGKF141Z0

TEQ T.EQUAL 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

TEQ T.EQUAL 2.00 6.00 STD B-16.9 ASTM A 234 BW WEG684ZZ0


GR.WPB
TEQ T.EQUAL 8.00 24.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 6.00 STD, B-16.9 ASTM A 234 BW WRG684ZZ0


STD GR.WPB
TRED T.RED 8.00 24.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 6.00 STD, B-16.9 ASTM A 234 BW WUG684ZZ0
STD GR.WPB
REDC REDUC.CONC 8.00 24.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ0
GR.WPB-W
REDC REDUC.CONC 26.00 36.00 M, M EIL'STD IS-3589 GR.330 BW WUKF14ZZ0

REDE REDUC.ECC 2.00 6.00 STD, B-16.9 ASTM A 234 BW WVG684ZZ0


STD GR.WPB
REDE REDUC.ECC 8.00 24.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ0
GR.WPB-W
REDE REDUC.ECC 26.00 36.00 M, M EIL'STD IS-3589 GR.330 BW WVKF14ZZ0

SWGC SWAGE.CONC 0.50 3.00 STD, BS-3799 ASTM A 105 PBE WNH026ZZ0
STD
SWGE SWAGE.ECC 0.50 3.00 STD, BS-3799 ASTM A 105 PBE WPH026ZZ0
STD
CAP CAP 0.50 1.50 B-16.11 ASTM A 105 SCRF, 3000 WF60282Z0

CAP CAP 2.00 6.00 STD B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CAP CAP 8.00 36.00 M B-16.9 ASTM A 234 BW WFG684ZZ0
GR.WPB
CPLF CPLNG.FULL 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

CPLR CPLNG.RED 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

Package : IPMCS
Report No. : 50 A94A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 39 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A94A Sheet 5 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
UNN UNION 0.50 1.50 BS-3799 ASTM A 105 SW, 3000 WQH02D2Z0

Valves Group
GAV VLV.GATE 0.25 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51001ZZZ0
105,TRIM- 16.11, SHT NO.- 51001
STELLITED,STEM-
13%CR.STEEL
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 51321
GAV VLV.GATE 26.00 42.00 BS-1414 BODY-ASTM A 216 FLGD, 150, 51920ZZZ0
GR.WCB,TRIM- AWWAC207,
13% CR.STEEL FF/125AARH, SHT
NO.- 51920
GLV VLV.GLOBE 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52001ZZZ0
105,TRIM- 16.11, SHT NO.- 52001
STELLITED,STEM-
13%CR STEEL
GLV VLV.GLOBE 2.00 16.00 BS-1873 BODY-ASTM A 216 FLGD, 150, B-16.5, 52321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 52321
CHV VLV.CHECK 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53001ZZZ0
105,TRIM- 16.11, SHT NO.- 53001
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 150, B-16.5, 53321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 53321
CHV VLV.CHECK 26.00 48.00 API-594 BODY-ASTM A 216 FLGD, 150, 53316ZZZ0
GR.WCB,TRIM- AWWAC207,
13% CR.STEEL FF/125AARH, SHT
NO.- 53316
BLV VLV.BALL 0.50 16.00 BS-5351 BODY-ASTM A 105 FLGD, 150, B-16.5, 54321ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 54321
BODY SEAT-
RPTFE
BFV VLV.BTRFLY 3.00 24.00 BS-5155 BODY-ASTM A 216 WAFL, 150, B-16.5, 56321ZZZ0
GR.WCB,TRIM- WAF/125AARH, SHT
13% CR.STEEL NO.- 56321
BFV VLV.BTRFLY 26.00 48.00 BS-5155 BODY-ASTM A 216 FLGD, 150, 56316ZZZ0
GR.WCB,TRIM- AWWAC207,
13% CR.STEEL FF/125AARH, SHT
NO.- 56316
Bolt Group
BOS BOLT.STUD 18.00 36.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
BOM BOLT.M/C 0.50 16.00 B-18.2 BOLT:A307 GR.B, BM41418Z0
NUT:A563 GR.B

Package : IPMCS
Report No. : 50 A94A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 40 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A94A Sheet 6 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Gasket Group
GAS GASKET 0.50 24.00 B-16.21- IS-2712-GR.W/3 RING, 150, 2 MM GKB1052Z0
ANSI B16.5
GAS GASKET 26.00 36.00 AWWA-C207 IS-2712-GR.W/3 FULLFACE, 150, 2 MM GK21022Z0
CL.D
Trap/Strainer Group
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 6.00 STD EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0 104
T:SS304
PSR STRNR.PERM 8.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304

Package : IPMCS
Report No. : 50 A94A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 41 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A97A Sheet 1 of 5

PIPE CLASS : A97A


RATING : 150
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP 0 38 50 65 65
PRESS 14.7 14.7 14.7 14.7 18.9

SERVICE
FIRE WATER (ABOVE AND UNDER GROUND)

NOTES
65 FORGINGS ARE ACCEPTABLE IN LIEU OF PLATE MATERIAL FOR BLIND FLANGES AND SPACER & BLINDS.
88 AS PER TAC REQUIREMENTS, 10% OF THE BUTT WELD JOINTS SHALL BE RADIOGRAPHED. HOWEVER, 50% OF THESE
BUTT WELD JOINTS SHALL BE FIELD WELD JOINTS.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
107 FOR SIZE ABOVE 24"SPACER AND BLIND AS PER EIL 'STD 7-44-0162
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
199 FOR U/G SERVICES, PIPE WALL THICKNESSES ARE CALCULATED BASED ON SOIL PARAMETERS AND BURIAL DEPTH
OF 1500MM.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING 3000 LBS.

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-350, DF3

ON LINES >= 2.0" 0.75" OR AS PER P&ID. REFER EIL STD. 7-44-351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-350, VC1

ON LINES >= 2.0" 0.75" OR AS PER P&ID. REFER EIL STD 7-44-351, V1

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-353

PRESS.CONN 0.75" SW NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD 7-44-354

Package
Report No.
: IPMCS
: 50
A97A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 42 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A97A Sheet 2 of 5

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. T 36.
34. T R 34.
32. T R R 32.
30. T R R R 30.
28. T R R R R 28.
26. T R R R R R 26.
24. T R R R R R R 24.
22. 22.
20. T R R R R R R R 20.
18. T R R R R R R R R 18.
16. T R R R R R R R R R 16.
14. T R R R R R R R R R R 14.
12. T R R R R R R R R R R R 12.
10. T R R R R R R R R R R R R 10.
8.0 T R R R R R R R R R R R R R 8.0
6.0 T R R R R R R R R R R R R R R 6.0
5.0 5.0
4.0 T R R R R R R R R R R R R R R R 4.0
3.5 3.5
3.0 T P R R R R R R R R R R R R R R R 3.0
2.5 2.5
2.0 T P P R R R R R R R R R R R R R R R 2.0
1.5 T T H H H H H H H H H H H H H H H H H 1.5
1.25 H H H H H H H H H H H H H H 1.25
1.0 T T H H H H H H H H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
22.000
24.000
26.000
28.000
30.000
32.000
34.000
36.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 A97A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 43 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A97A Sheet 3 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 1.50 HVY IS-1239-I IS-1239 (BLACK) PE, C.WELDED PI6D471Z0

PIP PIPE 2.00 6.00 HVY IS-1239-I IS-1239 (BLACK) BE, C.WELDED PI6D411Z0

PIP PIPE 8.00 14.00 6.0 IS-3589 IS-3589 GR.410 BE, WELDED PI7E319Z0

PIP PIPE 16.00 24.00 8.0 IS-3589 IS-3589 GR.410 BE, WELDED PI7E319Z0

PIP PIPE 26.00 32.00 10.0 IS-3589 IS-3589 GR.410 BE, WELDED PI7E319Z0

PIP PIPE 34.00 40.00 12.0 IS-3589 IS-3589 GR.410 BE, WELDED PI7E319Z0

NIP NIPPLE 0.50 1.50 M IS-1239-I IS-1239 (BLACK) PBE, SEAMLESS PN6D467Z0

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 150, RF/125AARH FSC0127Z0

FLG FLNG.WN 26.00 40.00 M B-16.47-B ASTM A 105 150, FF/125AARH FWB0121Z0

FLG FLNG.SO 2.00 24.00 B-16.5 ASTM A 105 150, RF/125AARH FNC0127Z0

FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 150, RF/125AARH FBC0127Z0

FLB FLNG.BLIND 26.00 40.00 B-16.47-B ASTM A 285 GR.C 150, FF/125AARH FBB5321Z0

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 150, FF/125AARH FGK0121Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 150, FF/125AARH FCK0121Z0
B16.48
FEF SPCR&BLND 26.00 40.00 EIL'STD ASTM A 285 GR.C 150, FF/125AARH FCE5321Z0 107

Fitting Group
ELB90 ELBOW.90 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

ELB90 ELBOW.90 2.00 6.00 STD B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB90 ELBOW.90 8.00 40.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z10
GR.WPB-W
ELB45 ELBOW.45 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

ELB45 ELBOW.45 2.00 6.00 STD B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
ELB45 ELBOW.45 8.00 40.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z10
GR.WPB-W
TEQ T.EQUAL 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

Package : IPMCS
Report No. : 50 A97A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 44 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A97A Sheet 4 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
TEQ T.EQUAL 2.00 6.00 STD B-16.9 ASTM A 234 BW WEG684ZZ0
GR.WPB
TEQ T.EQUAL 8.00 40.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 6.00 STD, B-16.9 ASTM A 234 BW WRG684ZZ0


STD GR.WPB
TRED T.RED 8.00 40.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 6.00 STD, B-16.9 ASTM A 234 BW WUG684ZZ0
STD GR.WPB
REDC REDUC.CONC 8.00 40.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ0
GR.WPB-W
REDE REDUC.ECC 2.00 6.00 STD, B-16.9 ASTM A 234 BW WVG684ZZ0
STD GR.WPB
REDE REDUC.ECC 8.00 40.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ0
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 STD, BS-3799 ASTM A 105 PBE WNH026ZZ0
STD
SWGE SWAGE.ECC 0.50 3.00 STD, BS-3799 ASTM A 105 PBE WPH026ZZ0
STD
CAP CAP 0.50 1.50 B-16.11 ASTM A 105 SCRF, 3000 WF60282Z0

CAP CAP 2.00 6.00 STD B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CAP CAP 8.00 40.00 M B-16.9 ASTM A 234 BW WFG684ZZ0
GR.WPB
CPLF CPLNG.FULL 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

CPLR CPLNG.RED 0.50 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

UNN UNION 0.50 1.50 BS-3799 ASTM A 105 SW, 3000 WQH02D2Z0

Valves Group
GAV VLV.GATE 0.25 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51001ZZZ0
105,TRIM- 16.11, SHT NO.- 51001
STELLITED,STEM-
13%CR.STEEL
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 51321

Package : IPMCS
Report No. : 50 A97A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 45 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : A97A Sheet 5 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Valves Group
GAV VLV.GATE 2.00 42.00 API-600 BODY-ASTM A 216 FLGD, 150, B-16.5, 51301ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 51301
GLV VLV.GLOBE 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52001ZZZ0
105,TRIM- 16.11, SHT NO.- 52001
STELLITED,STEM-
13%CR STEEL
GLV VLV.GLOBE 2.00 16.00 BS-1873 BODY-ASTM A 216 FLGD, 150, B-16.5, 52321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 52321
CHV VLV.CHECK 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53001ZZZ0
105,TRIM- 16.11, SHT NO.- 53001
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 150, B-16.5, 53321ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 53321
BFV VLV.BTRFLY 3.00 24.00 BS-5155 BODY-ASTM A 216 WAFL, 150, B-16.5, 56320ZZZ0
GR.WCB,TRIM- WAF/125AAR, SHT
13% CR.STEEL NO.- 56320
BFV VLV.BTRFLY 26.00 36.00 BS-5155 BODY-ASTM A 216 FLGD, 150, B-16.47 B, 56310ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 56310
Bolt Group
BOS BOLT.STUD 0.50 40.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 24.00 B-16.21- IS-2712-GR.W/3 RING, 150, 2 MM GKB1052Z0
ANSI B16.5
GAS GASKET 26.00 40.00 B-16.21- IS-2712-GR.W/3 FULLFACE, 150, 2 MM GKA1022Z0
ANSI
B16.47B
Trap/Strainer Group
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 6.00 STD EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0 104
T:SS304
PSR STRNR.PERM 8.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304
PSR STRNR.PERM 26.00 40.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304

Package : IPMCS
Report No. : 50 A97A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 46 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B19A Sheet 1 of 6

PIPE CLASS : B19A


RATING : 300
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 3 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP -29 38 93 149 204 260 316 343 371 399 427
PRESS 52.02 52.02 47.45 46.05 44.64 42.18 38.66 37.61 37.61 35.5 28.82

SERVICE
NONNACE & STRESS RELIEVED MILD CORROSIVE SOUR SERVICES & AMINE
CAUSTIC (STRESS RELIEVED ZONE)
WET H2S SERVICE

NOTES
7 FOR RESTRICTION ON USE OF BALL,PLUG & BUTTERFLY VALVES,REFER GENERAL NOTES.
32 CORROSION ALLOWANCE HAS BEEN ADJUSTED TO SELECT OPTIMUM SCHEDULE. REFER GENERAL NOTES TO PMS.
34 MAXIMUM HARDNESS IN WELD JOINTS SHALL BE LIMITED TO 200 BHN.
73 GATE VALVES OF SIZE 26" AND ABOVE SHALL BE IN ACCORDANCE WITH BS-1414 AND FLANGE ENDS SHALL BE IN
ACCORDANCE WITH ASME B16.47 SERIES B.
75 BALL VALVES SHALL NOT BE USED IN CAUSTIC SERVICE.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
218 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 78 DEG C & 14.5 KG/SQ.CM G
(FOR 18 IN)] AND 80% OF CLASS CONDITIONS

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-0350, DF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-0350, VF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V4

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SW NIPPLE WITH VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
B19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 47 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B19A Sheet 2 of 6

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.
BRANCH PIPE (SIZE IN INCHES)
BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. 24.
22. 22.
20. 20.
18. 18.
16. T 16.
14. T R 14.
12. T R R 12.
10. T R R R 10.
8.0 T R R R R 8.0
6.0 T R R R R R 6.0
5.0 5.0
4.0 T R R R R R R 4.0
3.5 3.5
3.0 T R R R R R R R 3.0
2.5 2.5
2.0 T R R R R R R R R 2.0
1.5 T T H H H H H H H H 1.5
1.25 H 1.25
1.0 T T H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 B19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 48 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B19A Sheet 3 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.25 0.75 S160 B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 1.00 1.50 XS B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 2.00 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 3.00 6.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 8.00 10.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0 32

PIP PIPE 12.00 14.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 16.00 16.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z0
GR.B60 CL.22
PIP PIPE 18.00 18.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z0 218
GR.B60 CL.22
NIP NIPPLE 0.50 0.75 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

NIP NIPPLE 1.00 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 300, RF/125AARH FSC0147Z0

FLG FLNG.WN 2.00 24.00 M B-16.5 ASTM A 105 300, RF/125AARH FWC0147Z0

FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 300, RF/125AARH FBC0147Z0

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 300, FF/125AARH FGK0141Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 300, FF/125AARH FCK0141Z0
B16.48
Fitting Group
ELB90 ELBOW.90 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WA602D3Z0

ELB90 ELBOW.90 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

ELB90 ELBOW.90 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB90 ELBOW.90 16.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z10
GR.WPB-W
ELB45 ELBOW.45 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WB602D3Z0

ELB45 ELBOW.45 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

ELB45 ELBOW.45 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB

Package : IPMCS
Report No. : 50 B19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 49 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B19A Sheet 4 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB45 ELBOW.45 16.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z10
GR.WPB-W
TEQ T.EQUAL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WE602D3Z0

TEQ T.EQUAL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

TEQ T.EQUAL 2.00 14.00 M B-16.9 ASTM A 234 BW WEG684ZZ0


GR.WPB
TEQ T.EQUAL 16.00 24.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WR602D3Z0

TRED T.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 14.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ0


GR.WPB
TRED T.RED 16.00 24.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ0
GR.WPB
REDC REDUC.CONC 16.00 24.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ0
GR.WPB-W
REDE REDUC.ECC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ0
GR.WPB
REDE REDUC.ECC 16.00 24.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ0
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WNH026ZZ0

SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WPH026ZZ0

CAP CAP 0.50 0.75 B-16.11 ASTM A 105 SCRF, 6000 WF60283Z0

CAP CAP 1.00 1.50 B-16.11 ASTM A 105 SCRF, 3000 WF60282Z0

CAP CAP 2.00 24.00 M B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CPLF CPLNG.FULL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WJ602D3Z0

CPLF CPLNG.FULL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WK602D3Z0

CPLH CPLNG.HALF 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WL602D3Z0

Package : IPMCS
Report No. : 50 B19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 50 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B19A Sheet 5 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CPLL CPLNG.LH 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

CPLR CPLNG.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WM602D3Z0

CPLR CPLNG.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

Valves Group
GAV VLV.GATE 0.50 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51013ZZZ0
105,TRIM- 16.11, SHT NO.- 51013
STELLITED
GAV VLV.GATE 2.00 42.00 API-600 BODY-ASTM A 216 FLGD, 300, B-16.5, 51413ZZZ0 73
GR.WCB,TRIM-SS RF/125AARH, SHT
304 NO.- 51413
GLV VLV.GLOBE 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52013ZZZ0
105,TRIM- 16.11, SHT NO.- 52013
STELLITED
GLV VLV.GLOBE 2.00 12.00 BS-1873 BODY-ASTM A 216 FLGD, 300, B-16.5, 52413ZZZ0
GR.WCB,TRIM-SS RF/125AARH, SHT
304 NO.- 52413
CHV VLV.CHECK 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53013ZZZ0
105,TRIM- 16.11, SHT NO.- 53013
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 300, B-16.5, 53413ZZZ0
GR.WCB,TRIM-SS RF/125AARH, SHT
304 NO.- 53413
BLV VLV.BALL 0.50 16.00 BS-5351 BODY-ASTM A 105 FLGD, 300, B-16.5, 54413ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 54413
BODY SEAT-
RPTFE
PLV VLV.PLUG 0.50 12.00 BS-5353 BODY-ASTM A 105 FLGD, 300, B-16.5, 55413ZZZ0
/A RF/125AARH, SHT
216GR.WCB,PLUG- NO.- 55413
HARDENED
Bolt Group
BOS BOLT.STUD 0.50 24.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 300 GK63174Z0
ANSI B16.5 SS316+CAF
Trap/Strainer Group
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 14.00 M EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0 104
T:SS304

Package : IPMCS
Report No. : 50 B19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 51 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B19A Sheet 6 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Trap/Strainer Group
PSR STRNR.PERM 16.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304

Package : IPMCS
Report No. : 50 B19A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 52 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B1A Sheet 1 of 6

PIPE CLASS : B1A


RATING : 300
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP -29 38 93 149 204 260 316 343 371 399 427
PRESS 52.02 52.02 47.45 46.05 44.64 42.18 38.66 37.61 37.61 35.5 28.82

SERVICE
NON CORROSIVE PROCESS - FLAMMABLE / NON FLAMMABLE, NON LETHAL - HYDROCARBONS, AROMATICS,
AMMONIA, SWEET GAS, FLUSHING OIL AND OTHER UTILITIES -MP CONDENSATE, INSTRUMENT AIR, PLANT AIR,
NITROGEN, AMMONIA GAS ETC. ABOVE CLASS 'A1A'.

NOTES
7 FOR RESTRICTION ON USE OF BALL,PLUG & BUTTERFLY VALVES,REFER GENERAL NOTES.
32 CORROSION ALLOWANCE HAS BEEN ADJUSTED TO SELECT OPTIMUM SCHEDULE. REFER GENERAL NOTES TO PMS.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
215 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 150 DEG C & 45 KG/SQ.CM G
(FOR 16 IN), 273.7 DEG C & 17.8 KG/SQ.CM G (FOR 16 IN), 270.0 DEG C & 23.9 KG/SQ.CM G (FOR 16 IN), 256 DEG C & 42
KG/SQ.CM G (FOR 16 IN)] AND 80% OF CLASS CONDITIONS
230 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 160 DEG C & 45 KG/SQ.CM G
(FOR 18 IN), 240.7 DEG C & 17.8 KG/SQ.CM G (FOR 18 IN), 224.0 DEG C & 17.8 KG/SQ.CM G (FOR 18 IN), 150 DEG C & 45
KG/SQ.CM G (FOR 18 IN)] AND 80% OF CLASS CONDITIONS
231 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 150 DEG C & 45 KG/SQ.CM G
(FOR 20 IN), 160 DEG C & 45 KG/SQ.CM G (FOR 20 IN), 183.0 DEG C & 45 KG/SQ.CM G (FOR 20 IN), 177 DEG C & 42
KG/SQ.CM G (FOR 20 IN)] AND 80% OF CLASS CONDITIONS
232 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 188 DEG C & 14.7 KG/SQ.CM
G (FOR 24 IN)] AND 80% OF CLASS CONDITIONS

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-0350, DF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-0350, VF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V4

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SW NIPPLE WITH VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
B1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 53 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B1A Sheet 2 of 6

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. 24.
22. 22.
20. T 20.
18. T R 18.
16. T R R 16.
14. T R R R 14.
12. T R R R R 12.
10. T R R R R R 10.
8.0 T R R R R R R 8.0
6.0 T R R R R R R R 6.0
5.0 5.0
4.0 T R R R R R R R R 4.0
3.5 3.5
3.0 T P R R R R R R R R 3.0
2.5 2.5
2.0 T P P R R R R R R R R 2.0
1.5 T T H H H H H H H H H H 1.5
1.25 1.25
1.0 T T H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 B1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 54 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B1A Sheet 3 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 0.75 S160 B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 1.00 1.50 XS B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 2.00 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 3.00 14.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 16.00 16.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 215
GR.B60 CL.12
PIP PIPE 18.00 18.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 230
GR.B60 CL.12
PIP PIPE 20.00 20.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 32
GR.B60 CL.12
PIP PIPE 24.00 24.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 232
GR.B60 CL.12
NIP NIPPLE 0.50 0.75 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

NIP NIPPLE 1.00 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 300, RF/125AARH FSC0147Z0

FLG FLNG.WN 2.00 24.00 M B-16.5 ASTM A 105 300, RF/125AARH FWC0147Z0

FLG/60 FLNG.WN 2.00 24.00 M B-16.5 ASTM A 105 600, RF/125AARH FWC0167Z0
0
FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 300, RF/125AARH FBC0147Z0

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 300, FF/125AARH FGK0141Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 300, FF/125AARH FCK0141Z0
B16.48
Fitting Group
ELB90 ELBOW.90 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WA602D3Z0

ELB90 ELBOW.90 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

ELB90 ELBOW.90 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB90 ELBOW.90 16.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z10
GR.WPB-W
ELB45 ELBOW.45 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WB602D3Z0

ELB45 ELBOW.45 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

Package : IPMCS
Report No. : 50 B1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 55 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B1A Sheet 4 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB45 ELBOW.45 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
ELB45 ELBOW.45 16.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z10
GR.WPB-W
TEQ T.EQUAL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WE602D3Z0

TEQ T.EQUAL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

TEQ T.EQUAL 2.00 14.00 M B-16.9 ASTM A 234 BW WEG684ZZ0


GR.WPB
TEQ T.EQUAL 16.00 24.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WR602D3Z0

TRED T.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 14.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ0


GR.WPB
TRED T.RED 16.00 24.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ0
GR.WPB
REDC REDUC.CONC 16.00 24.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ0
GR.WPB-W
REDE REDUC.ECC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ0
GR.WPB
REDE REDUC.ECC 16.00 24.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ0
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WNH026ZZ0

SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WPH026ZZ0

CAP CAP 2.00 24.00 M B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CPLF CPLNG.FULL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WJ602D3Z0

CPLF CPLNG.FULL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WK602D3Z0

CPLH CPLNG.HALF 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WL602D3Z0

CPLL CPLNG.LH 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

Package : IPMCS
Report No. : 50 B1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 56 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B1A Sheet 5 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CPLR CPLNG.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WM602D3Z0

CPLR CPLNG.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

Valves Group
GAV VLV.GATE 0.25 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51001ZZZ0
105,TRIM- 16.11, SHT NO.- 51001
STELLITED,STEM-
13%CR.STEEL
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 300, B-16.5, 51401ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 51401
GLV VLV.GLOBE 0.25 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52001ZZZ0
105,TRIM- 16.11, SHT NO.- 52001
STELLITED,STEM-
13%CR STEEL
GLV VLV.GLOBE 2.00 12.00 BS-1873 BODY-ASTM A 216 FLGD, 300, B-16.5, 52401ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 52401
CHV VLV.CHECK 0.25 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53001ZZZ0
105,TRIM- 16.11, SHT NO.- 53001
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 300, B-16.5, 53401ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
13% CR.STEEL NO.- 53401
BLV VLV.BALL 0.50 16.00 BS-5351 BODY-ASTM A 105 FLGD, 300, B-16.5, 54401ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 54401
BODY SEAT-
RPTFE
PLV VLV.PLUG 0.50 24.00 BS-5353 BODY-ASTM A 105 FLGD, 300, B-16.5, 55401ZZZ0
/A RF/125AARH, SHT
216GR.WCB,TRIM- NO.- 55401
PLUG-HARDENED
Bolt Group
BOS BOLT.STUD 0.50 24.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 300 GK63174Z0
ANSI B16.5 SS316+CAF
GAS/60 GASKET 2.00 24.00 B-16.20- SP.WND SPIRAL, 600 GK63176Z0
0 ANSI B16.5 SS316+CAF
Trap/Strainer Group
TRP TRAP.STEAM 0.50 1.50 MNF'STD B:A105;T:13%CR;S: FLGD, THRMDNMC, TR30655B0
SS304 300,RF/125AARH

Package : IPMCS
Report No. : 50 B1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 57 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B1A Sheet 6 of 6

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Trap/Strainer Group
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 14.00 M EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0


T:SS304
PSR STRNR.PERM 16.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0
NT:SS304

Package : IPMCS
Report No. : 50 B1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 58 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B2A Sheet 1 of 5

PIPE CLASS : B2A


RATING : 300
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT : IBR SERVICE

TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS


TEMP 0 38 93 149 204 260 316 343 371 399 427
PRESS 52.02 52.02 47.45 46.05 44.64 42.18 38.66 37.61 37.61 35.5 28.82

SERVICE
STEAM, BOILER FEED WATER & CONDENSATE - ALL IBR

NOTES
8 ALL PIPES,FITTINGS,VALVES,FLANGES,TRAPS AND STRAINERS SHALL BE TESTED AND TEST CERTIFICATE IN FORM
III A FOR PIPE AND FORM III C FOR OTHERS SHALL BE REQD. DULY COUNTERSIGNED BY IBR AUTHORITY OR ITS
APPROVED REPRESENTATIVE.
9 CARBON CONTENT SHALL NOT EXCEED 0.25% FOR ALL PIPES,FITTINGS FLANGES ETC. THAT MAY REQUIRE
WELDING. MOREOVER,FOR FLANGES THE SULPHUR AND PHOSPHOROUS SHALL ALSO BE LIMITED TO 0.05% EACH.
32 CORROSION ALLOWANCE HAS BEEN ADJUSTED TO SELECT OPTIMUM SCHEDULE. REFER GENERAL NOTES TO PMS.
107 FOR SIZE ABOVE 24"SPACER AND BLIND AS PER EIL 'STD 7-44-0162
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
216 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 300 DEG C & 12.5 KG/SQ.CM
G (FOR 32 IN), 300 DEG C & 12.5 KG/SQ.CM G (FOR 16 IN)] AND 80% OF CLASS CONDITIONS

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-0350, DF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-0350, VF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V4

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SW NIPPLE WITH VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
B2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 59 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B2A Sheet 2 of 5

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. 24.
22. 22.
20. T 20.
18. T R 18.
16. T R R 16.
14. T R R R 14.
12. T R R R R 12.
10. T R R R R R 10.
8.0 T R R R R R R 8.0
6.0 T R R R R R R R 6.0
5.0 5.0
4.0 T R R R R R R R R 4.0
3.5 3.5
3.0 T R R R R R R R R R 3.0
2.5 2.5
2.0 T P P R R R R R R R R 2.0
1.5 T T H H H H H H H H H H 1.5
1.25 1.25
1.0 T T H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 B2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 60 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B2A Sheet 3 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 0.75 S160 B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z1

PIP PIPE 1.00 1.50 XS B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z1

PIP PIPE 2.00 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z1

PIP PIPE 3.00 14.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z1

PIP PIPE 16.00 16.00 STD B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z1 216
GR.B60 CL.12
PIP PIPE 20.00 20.00 XS B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z1 32
GR.B60 CL.12
PIP PIPE 32.00 32.00 15.2 B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z1 216
GR.B60 CL.12
NIP NIPPLE 0.50 0.75 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z1

NIP NIPPLE 1.00 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z1

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 300, RF/125AARH FSC0147Z1

FLG FLNG.WN 2.00 24.00 M B-16.5 ASTM A 105 300, RF/125AARH FWC0147Z1

FLG FLNG.WN 26.00 32.00 M B-16.47-B ASTM A 105 300, RF/125AARH FWB0147Z1

FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 300, RF/125AARH FBC0147Z1

FLB FLNG.BLIND 26.00 32.00 B-16.47-B ASTM A 105 300, RF/125AARH FBB0147Z1

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 300, FF/125AARH FGK0141Z1
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 300, FF/125AARH FCK0141Z1
B16.48
FEF SPCR&BLND 26.00 32.00 EIL'STD ASTM A 516 GR.70 300, FF/125AARH FCE6341Z1 107

Fitting Group
ELB90 ELBOW.90 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WA602D3Z1

ELB90 ELBOW.90 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z1

ELB90 ELBOW.90 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z11
GR.WPB
ELB90 ELBOW.90 16.00 32.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z11
GR.WPB-W
ELB45 ELBOW.45 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WB602D3Z1

Package : IPMCS
Report No. : 50 B2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 61 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B2A Sheet 4 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB45 ELBOW.45 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z1

ELB45 ELBOW.45 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z11
GR.WPB
ELB45 ELBOW.45 16.00 32.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z11
GR.WPB-W
TEQ T.EQUAL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WE602D3Z1

TEQ T.EQUAL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z1

TEQ T.EQUAL 2.00 14.00 M B-16.9 ASTM A 234 BW WEG684ZZ1


GR.WPB
TEQ T.EQUAL 16.00 32.00 M B-16.9 ASTM A 234 BW WEG754ZZ1
GR.WPB-W
TRED T.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WR602D3Z1

TRED T.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z1

TRED T.RED 2.00 14.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ1


GR.WPB
TRED T.RED 16.00 32.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ1
GR.WPB-W
REDC REDUC.CONC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ1
GR.WPB
REDC REDUC.CONC 16.00 32.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ1
GR.WPB-W
REDE REDUC.ECC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ1
GR.WPB
REDE REDUC.ECC 16.00 32.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ1
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WNH026ZZ1

SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WPH026ZZ1

CAP CAP 2.00 32.00 M B-16.9 ASTM A 234 BW WFG684ZZ1


GR.WPB
CPLF CPLNG.FULL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WJ602D3Z1

CPLF CPLNG.FULL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z1

CPLH CPLNG.HALF 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WK602D3Z1

CPLH CPLNG.HALF 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z1

CPLL CPLNG.LH 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WL602D3Z1

Package : IPMCS
Report No. : 50 B2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 62 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : B2A Sheet 5 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CPLL CPLNG.LH 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z1

CPLR CPLNG.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WM602D3Z1

CPLR CPLNG.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z1

Valves Group
GAV VLV.GATE 0.50 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51002ZZZ1
105,TRIM- 16.11, SHT NO.- 51002
STELLITED,STEM-
13%CR STEEL
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 300, B-16.5, 51402ZZZ1
GR.WCB,TRIM- RF/125AARH, SHT
13% CR STEEL NO.- 51402
GLV VLV.GLOBE 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52002ZZZ1
105,TRIM- 16.11, SHT NO.- 52002
STELLITED,STEM-
13%CR.STEEL
GLV VLV.GLOBE 2.00 12.00 BS-1873 BODY-ASTM A 216 FLGD, 300, B-16.5, 52402ZZZ1
GR.WCB,TRIM- RF/125AARH, SHT
13% CR STEEL NO.- 52402
CHV VLV.CHECK 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53002ZZZ1
105,TRIM- 16.11, SHT NO.- 53002
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 300, B-16.5, 53402ZZZ1
GR.WCB,TRIM- RF/125AARH, SHT
13% CR STEEL NO.- 53402
G3V VLV.PISTON 0.50 1.00 MNF'STD BODY-ASTM A 216 SW, 300, 3000, B- 64402ZZZ1
GR.WCB,TRIM- 16.11, SHT NO.- 64402
13% CR.STEEL
Bolt Group
BOS BOLT.STUD 0.50 32.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 300 GK63174Z0
ANSI B16.5 SS316+CAF
GAS GASKET 26.00 32.00 B-16.20- SP.WND SPIRAL, 300 GK56174Z0
ANSI SS316+CAF+ I
B16.47B RING
Trap/Strainer Group
TRP TRAP.STEAM 0.50 1.50 MNF'STD B:A105;T:13%CR;S: FLGD, THRMDNMC, TR30655B1
SS304 300,RF/125AARH
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D511

PSR STRNR.PERM 2.00 24.00 MNF'STD B:A216GR.WCB;IN FLGD, Y-TYPE, SP38055B1


T:SS304 300,RF/125AARH

Package : IPMCS
Report No. : 50 B2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 63 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D1A Sheet 1 of 5

PIPE CLASS : D1A


RATING : 600
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP -29 38 93 149 204 260 316 343 371 399 427
PRESS 104.05 104.05 94.91 92.45 89.29 84.36 76.98 75.58 74.87 71.01 58

SERVICE
NON CORROSIVE PROCESS - FLAMMABLE / NON FLAMMABL AND NON LETHAL - PETROLEUM PRODUCTS: FO. FG,
SWEET GAS, INHIBITOR SOLUTION, NH3, BRINE (MINUS 10 DEG C), CO2, CAUSTIC SODA (20 Be MAX & TEMP 70 DEG C
MAX), PARAXYLENE, BITUMEN.

NOTES
3 USE PIPE OF CLASS 22 INSTEAD OF CLASS 12 IF PIPE THICKNESS EXCEEDS 19.05MM.
7 FOR RESTRICTION ON USE OF BALL,PLUG & BUTTERFLY VALVES,REFER GENERAL NOTES.
32 CORROSION ALLOWANCE HAS BEEN ADJUSTED TO SELECT OPTIMUM SCHEDULE. REFER GENERAL NOTES TO PMS.
104 FOR PERMANENT AND TEMPORARY T-TYPE BW STRAINERS REFER EIL STD 7-44-0303 AND 7-44-0304
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
221 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 200 DEG C & 55.5 KG/SQ.CM
G (FOR 10 IN), 205 DEG C & 55.5 KG/SQ.CM G (FOR 10 IN), 320 DEG C & 55.5 KG/SQ.CM G (FOR 10 IN)] AND 80% OF
CLASS CONDITIONS
235 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 233 DEG C & 55.5 KG/SQ.CM
G (FOR 12 IN), 292 DEG C & 55.5 KG/SQ.CM G (FOR 12 IN), 263 DEG C & 42 KG/SQ.CM G (FOR 14 IN), 292 DEG C & 55.5
KG/SQ.CM G (FOR 14 IN)] AND 80% OF CLASS CONDITIONS
236 PIPE WALL THICKNESS IS CALCULATED BASED ON ACTUAL DESIGN LINE CONDITIONS [ 263 DEG C & 42 KG/SQ.CM G
(FOR 16 IN)] AND 80% OF CLASS CONDITIONS

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-0350, DF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-0350, VF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V4

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SW NIPPLE WITH VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
D1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 64 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D1A Sheet 2 of 5

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.
BRANCH PIPE (SIZE IN INCHES)
BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. 24.
22. 22.
20. 20.
18. 18.
16. 16.
14. 14.
12. 12.
10. 10.
8.0 T 8.0
6.0 T R 6.0
5.0 5.0
4.0 T R R 4.0
3.5 3.5
3.0 T R R R 3.0
2.5 2.5
2.0 T R R R R 2.0
1.5 T T H H H H 1.5
1.25 1.25
1.0 T T H H H H H 1.0
0.75 T T T H H H H H 0.75
0.5 T T T T H H H H H 0.5
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 D1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 65 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D1A Sheet 3 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 0.75 S160 B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 1.00 1.50 XS B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z0

PIP PIPE 2.00 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 3.00 3.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0 32

PIP PIPE 4.00 8.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0

PIP PIPE 10.00 10.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0 221

PIP PIPE 12.00 12.00 S60 B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0 235

PIP PIPE 14.00 14.00 S60 B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z0 235

PIP PIPE 16.00 16.00 S60 B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z0 3
GR.B60 CL.12
NIP NIPPLE 0.50 0.75 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

NIP NIPPLE 1.00 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z0

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 600, RF/125AARH FSC0167Z0

FLG FLNG.WN 2.00 24.00 M B-16.5 ASTM A 105 600, RF/125AARH FWC0167Z0

FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 600, RF/125AARH FBC0167Z0

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 600, FF/125AARH FGK0161Z0
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 600, FF/125AARH FCK0161Z0
B16.48
Fitting Group
ELB90 ELBOW.90 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WA602D3Z0

ELB90 ELBOW.90 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z0

ELB90 ELBOW.90 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z10
GR.WPB
ELB90 ELBOW.90 16.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z10
GR.WPB-W
ELB45 ELBOW.45 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WB602D3Z0

ELB45 ELBOW.45 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z0

Package : IPMCS
Report No. : 50 D1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 66 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D1A Sheet 4 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB45 ELBOW.45 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z10
GR.WPB
ELB45 ELBOW.45 16.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z10
GR.WPB-W
TEQ T.EQUAL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WE602D3Z0

TEQ T.EQUAL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z0

TEQ T.EQUAL 2.00 14.00 M B-16.9 ASTM A 234 BW WEG684ZZ0


GR.WPB
TEQ T.EQUAL 16.00 24.00 M B-16.9 ASTM A 234 BW WEG754ZZ0
GR.WPB-W
TRED T.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WR602D3Z0

TRED T.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z0

TRED T.RED 2.00 14.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ0


GR.WPB
TRED T.RED 16.00 24.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ0
GR.WPB-W
REDC REDUC.CONC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ0
GR.WPB
REDC REDUC.CONC 16.00 24.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ0
GR.WPB-W
REDE REDUC.ECC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ0
GR.WPB
REDE REDUC.ECC 16.00 24.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ0
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WNH026ZZ0

SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WPH026ZZ0

CAP CAP 2.00 24.00 M B-16.9 ASTM A 234 BW WFG684ZZ0


GR.WPB
CPLF CPLNG.FULL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WJ602D3Z0

CPLF CPLNG.FULL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z0

CPLH CPLNG.HALF 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WK602D3Z0

CPLH CPLNG.HALF 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z0

CPLL CPLNG.LH 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WL602D3Z0

CPLL CPLNG.LH 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z0

Package : IPMCS
Report No. : 50 D1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 67 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D1A Sheet 5 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CPLR CPLNG.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WM602D3Z0

CPLR CPLNG.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z0

Valves Group
GAV VLV.GATE 0.25 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51001ZZZ0
105,TRIM- 16.11, SHT NO.- 51001
STELLITED,STEM-
13%CR.STEEL
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 600, B-16.5, 51501ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
STELLITED,STEM- NO.- 51501
13%CR STEEL
GLV VLV.GLOBE 0.25 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52001ZZZ0
105,TRIM- 16.11, SHT NO.- 52001
STELLITED,STEM-
13%CR STEEL
GLV VLV.GLOBE 2.00 12.00 BS-1873 BODY-ASTM A 216 FLGD, 600, B-16.5, 52501ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
STELLITED,STEM- NO.- 52501
13%CR.STEEL
CHV VLV.CHECK 0.25 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53001ZZZ0
105,TRIM- 16.11, SHT NO.- 53001
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 600, B-16.5, 53501ZZZ0
GR.WCB,TRIM- RF/125AARH, SHT
STELLITED NO.- 53501
BLV VLV.BALL 0.50 16.00 BS-5351 BODY-ASTM A FLGD, 600, B-16.5, 54501ZZZ0
105,TRIM-SEAT- RF/125AARH, SHT
RPTFE NO.- 54501
Bolt Group
BOS BOLT.STUD 0.50 24.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 600 GK63176Z0
ANSI B16.5 SS316+CAF
Trap/Strainer Group
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D510

PSR STRNR.PERM 2.00 14.00 M EIL'STD B:A234GR.WPB;IN BW, T-TYPE SP13344Z0 104
T:SS304
PSR STRNR.PERM 16.00 24.00 M EIL'STD B:A234GR.WPBW;I BW, T-TYPE SP13644Z0 104
NT:SS304

Package : IPMCS
Report No. : 50 D1A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 68 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D2A Sheet 1 of 5

PIPE CLASS : D2A


RATING : 600
BASE MATERIAL : CARBON STEEL
CORROSION ALLOWANCE : 1.5 MM
SPECIAL REQUIREMENT : IBR SERVICE

TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS


TEMP 0 38 93 149 204 260 316 343 371 399 427
PRESS 104.05 104.05 94.91 92.45 89.29 84.36 76.98 75.58 74.87 71.01 58

SERVICE
STEAM (IBR), BOILER FEED WATER (IBR)

NOTES
8 ALL PIPES,FITTINGS,VALVES,FLANGES,TRAPS AND STRAINERS SHALL BE TESTED AND TEST CERTIFICATE IN FORM
III A FOR PIPE AND FORM III C FOR OTHERS SHALL BE REQD. DULY COUNTERSIGNED BY IBR AUTHORITY OR ITS
APPROVED REPRESENTATIVE.
9 CARBON CONTENT SHALL NOT EXCEED 0.25% FOR ALL PIPES,FITTINGS FLANGES ETC. THAT MAY REQUIRE
WELDING. MOREOVER,FOR FLANGES THE SULPHUR AND PHOSPHOROUS SHALL ALSO BE LIMITED TO 0.05% EACH.
32 CORROSION ALLOWANCE HAS BEEN ADJUSTED TO SELECT OPTIMUM SCHEDULE. REFER GENERAL NOTES TO PMS.
118 FOR ALL WELDED PIPES ,THE PLATE SHALL MEET HIC RESISTANT REQUIREMENTS.
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE ALL FLANGED, TO BE KEPT MINIMUM
JOINTS
PIPE JOINTS 1.5" & BELOW SW COUPLING

2.0" & ABOVE BUTTWELDED

DRAINS ON LINES <= 1.5" REFER EILSTD 7-44-0350, DF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D4

VENTS ON LINES <= 1.5" REFER EIL STD. 7-44-0350, VF3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V4

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SW NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
D2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 69 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D2A Sheet 2 of 5

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.

BRANCH PIPE (SIZE IN INCHES)


BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. T 24.
22. R 22.
20. T R 20.
18. T R R 18.
16. T R R R 16.
14. T R R R R 14.
12. T R R R R R 12.
10. T R R R R R R 10.
8.0 T R R R R R R R 8.0
6.0 T R R R R R R R R 6.0
5.0 5.0
4.0 T R R R R R R R R R 4.0
3.5 3.5
3.0 T R R R R R R R R R R 3.0
2.5 2.5
2.0 T R R R R R R R R R R R 2.0
1.5 T T H H H H H H H H H H H 1.5
1.25 1.25
1.0 T T H H H H H H H H H H H H 1.0
0.75 T T T H H H H H H H H H H H H 0.75
0.5 T T T T H H H H H H H H H H H H 0.5
10.000
12.000
14.000
16.000
18.000
20.000
22.000
24.000
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
8.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 D2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 70 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D2A Sheet 3 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 0.75 S160 B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z1

PIP PIPE 1.00 1.50 XS B-36.10 ASTM A 106 GR.B PE, SEAMLESS PI21977Z1

PIP PIPE 2.00 2.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z1

PIP PIPE 3.00 3.00 STD B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z1 32

PIP PIPE 4.00 10.00 XS B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z1 118

PIP PIPE 12.00 14.00 S60 B-36.10 ASTM A 106 GR.B BE, SEAMLESS PI21917Z1 118

PIP PIPE 16.00 18.00 S60 B-36.10 ASTM A 672 BE, E.FS.W PI2A813Z1 118
GR.B60 CL.12
PIP PIPE 20.00 24.00 S60 B-36.10 ASTM A 672 BE, E.FS.W PI2A913Z1 118
GR.B60 CL.22
NIP NIPPLE 0.50 0.75 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z1

NIP NIPPLE 1.00 1.50 M B-36.10 ASTM A 106 GR.B PBE, SEAMLESS PN21967Z1

Flange Group
FLG FLNG.SW 0.50 1.50 M B-16.5 ASTM A 105 600, RF/125AARH FSC0167Z1

FLG FLNG.WN 2.00 24.00 M B-16.5 ASTM A 105 600, RF/125AARH FWC0167Z1

FLB FLNG.BLIND 0.50 24.00 B-16.5 ASTM A 105 600, RF/125AARH FBC0167Z1

FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 105 600, FF/125AARH FGK0161Z1
B16.48
FEF SPCR&BLND 10.00 24.00 ASME- ASTM A 105 600, FF/125AARH FCK0161Z1
B16.48
Fitting Group
ELB90 ELBOW.90 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WA602D3Z1

ELB90 ELBOW.90 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WA602D2Z1

ELB90 ELBOW.90 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WAG684Z11
GR.WPB
ELB90 ELBOW.90 16.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WAG754Z11
GR.WPB-W
ELB45 ELBOW.45 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WB602D3Z1

ELB45 ELBOW.45 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WB602D2Z1

ELB45 ELBOW.45 2.00 14.00 M B-16.9 ASTM A 234 BW, 1.5D WBG684Z11
GR.WPB

Package : IPMCS
Report No. : 50 D2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 71 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D2A Sheet 4 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
ELB45 ELBOW.45 16.00 24.00 M B-16.9 ASTM A 234 BW, 1.5D WBG754Z11
GR.WPB-W
TEQ T.EQUAL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WE602D3Z1

TEQ T.EQUAL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WE602D2Z1

TEQ T.EQUAL 2.00 14.00 M B-16.9 ASTM A 234 BW WEG684ZZ1


GR.WPB
TEQ T.EQUAL 16.00 24.00 M B-16.9 ASTM A 234 BW WEG754ZZ1
GR.WPB-W
TRED T.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WR602D3Z1

TRED T.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WR602D2Z1

TRED T.RED 2.00 14.00 M, M B-16.9 ASTM A 234 BW WRG684ZZ1


GR.WPB
TRED T.RED 16.00 24.00 M, M B-16.9 ASTM A 234 BW WRG754ZZ1
GR.WPB-W
REDC REDUC.CONC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WUG684ZZ1
GR.WPB
REDC REDUC.CONC 16.00 24.00 M, M B-16.9 ASTM A 234 BW WUG754ZZ1
GR.WPB-W
REDE REDUC.ECC 2.00 14.00 M, M B-16.9 ASTM A 234 BW WVG684ZZ1
GR.WPB
REDE REDUC.ECC 16.00 24.00 M, M B-16.9 ASTM A 234 BW WVG754ZZ1
GR.WPB-W
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WNH026ZZ1

SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A 105 PBE WPH026ZZ1

CAP CAP 2.00 24.00 M B-16.9 ASTM A 234 BW WFG684ZZ1


GR.WPB
CPLF CPLNG.FULL 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WJ602D3Z1

CPLF CPLNG.FULL 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WJ602D2Z1

CPLH CPLNG.HALF 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WK602D3Z1

CPLH CPLNG.HALF 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WK602D2Z1

CPLL CPLNG.LH 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WL602D3Z1

CPLL CPLNG.LH 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WL602D2Z1

CPLR CPLNG.RED 0.50 0.75 B-16.11 ASTM A 105 SW, 6000 WM602D3Z1

Package : IPMCS
Report No. : 50 D2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 72 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : D2A Sheet 5 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
CPLR CPLNG.RED 1.00 1.50 B-16.11 ASTM A 105 SW, 3000 WM602D2Z1

Valves Group
GAV VLV.GATE 0.50 1.50 API-602 BODY-ASTM A SW, 800, 3000, B- 51002ZZZ1
105,TRIM- 16.11, SHT NO.- 51002
STELLITED,STEM-
13%CR STEEL
GAV VLV.GATE 2.00 24.00 API-600 BODY-ASTM A 216 FLGD, 600, B-16.5, 51502ZZZ1
GR.WCB,TRIM- RF/125AARH, SHT
STELLITED,STEM- NO.- 51502
13%CR STEEL
GLV VLV.GLOBE 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 52002ZZZ1
105,TRIM- 16.11, SHT NO.- 52002
STELLITED,STEM-
13%CR.STEEL
GLV VLV.GLOBE 2.00 12.00 BS-1873 BODY-ASTM A 216 FLGD, 600, B-16.5, 52502ZZZ1
GR.WCB,TRIM- RF/125AARH, SHT
STELLITED,STEM- NO.- 52502
13%CR.STEEL
CHV VLV.CHECK 0.50 1.50 BS-5352 BODY-ASTM A SW, 800, 3000, B- 53002ZZZ1
105,TRIM- 16.11, SHT NO.- 53002
STELLITED
CHV VLV.CHECK 2.00 24.00 BS-1868 BODY-ASTM A 216 FLGD, 600, B-16.5, 53502ZZZ1
GR.WCB,TRIM- RF/125AARH, SHT
STELLITED NO.- 53502
Bolt Group
BOS BOLT.STUD 0.50 24.00 B-18.2 BOLT:A193 GR.B7, BS40404Z0
NUT:A194 GR.2H
Gasket Group
GAS GASKET 0.50 24.00 B-16.20- SP.WND SPIRAL, 600 GK63176Z0
ANSI B16.5 SS316+CAF
Trap/Strainer Group
TRP TRAP.STEAM 0.50 1.50 MNF'STD B:A105;T:13%CR;S: FLGD, THRMDNMC, TR30655E1
SS304 600,RF/125AARH
PSR STRNR.PERM 0.50 1.50 MNF'STD B:A105;INT:SS304 SW, Y-TYPE, 800 SP303D511

PSR STRNR.PERM 2.00 24.00 MNF'STD B:A216GR.WCB;IN FLGD, Y-TYPE, SP38055E1


T:SS304 600,RF/125AARH

Package : IPMCS
Report No. : 50 D2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 73 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J21A Sheet 1 of 4

PIPE CLASS : J21A


RATING : 150
BASE MATERIAL : CS (Galv.)
CORROSION ALLOWANCE : 0 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP 0 38 65
PRESS 10.55 10.55 10.55

SERVICE
FIRE WATER-SPRINKLER SYSTEM BEFORE ORIFICE

NOTES
19 THREADED JOINTS SHALL BE MADE WITH 1" WIDTH PTFE JOINING TAPE.
20 SURFACES WHERE GALVANISING HAS BEEN BURNT OFF SHALL BE WIRE BRUSHED AND COLD GALVANISED WITH
ZINC COATING COMPOUND.
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE 1.5" & BELOW UNIONS (SCRF) TO BE KEPT MINIMUM
JOINTS
2" & ABOVE FLANGED (SCREWED) TO BE KEPT MINIMUM

PIPE JOINTS UPTO 6" SCREWED COUPLING

DRAINS ON LINES <= 1.5" REFER EIL STD 7-44-0350, DC3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D3

VENTS ON LINES <= 1.5" REFER EIL STD 7-440350, VC3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V3

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353

PRESS.CONN 0.75" SCRD NIPPLE WITH VALVE TO SPEC AS PER EIL STD 7-44-0354

Package
Report No.
: IPMCS
: 50
J21A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 74 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J21A Sheet 2 of 4

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.
BRANCH PIPE (SIZE IN INCHES)
BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. 24.
22. 22.
20. 20.
18. 18.
16. 16.
14. 14.
12. 12.
10. 10.
8.0 8.0
6.0 T 6.0
5.0 5.0
4.0 T T 4.0
3.5 3.5
3.0 T T T 3.0
2.5 2.5
2.0 T T T T 2.0
1.5 T T T T T 1.5
1.25 1.25
1.0 T T T T T T 1.0
0.75 T T T T T T T 0.75
0.5 T T T T T T T T 0.5
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 J21A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 75 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J21A Sheet 3 of 4

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 6.00 HVY IS-1239-I IS-1239 (GALV) SCRM, WELDED PI6D599Z0

Flange Group
FLG FLNG.SCRD 0.50 6.00 B-16.5 ASTM A 150, FF/125AARH FTC0721Z0
105(GALV.)
FLB FLNG.BLIND 0.50 6.00 B-16.5 ASTM A 150, FF/125AARH FBC0721Z0
105(GALV.)
FEF FLNG.FIG.8 0.50 6.00 ASME- ASTM A 150, FF/125AARH FGK0721Z0
B16.48 105(GALV.)
Fitting Group
ELB90 ELBOW.90 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WA60882Z0
105(GALV)
ELB90 ELBOW.90 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WALE98ZZ0
(GALV)
ELB45 ELBOW.45 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WB60882Z0
105(GALV)
ELB45 ELBOW.45 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WBLE98ZZ0
(GALV)
TEQ T.EQUAL 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WE60882Z0
105(GALV)
TEQ T.EQUAL 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WELE98ZZ0
(GALV)
TRED T.RED 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WR60882Z0
105(GALV)
TRED T.RED 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WRLE98ZZ0
(GALV)
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A TBE WNH08EZZ0
105(GALV)
SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A TBE WPH08EZZ0
105(GALV)
CAP CAP 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WF60882Z0
105(GALV)
CAP CAP 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WFLE98ZZ0
(GALV)
CPLF CPLNG.FULL 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WJ60882Z0
105(GALV)
CPLH CPLNG.HALF 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WK60882Z0
105(GALV)
CPLL CPLNG.LH 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WL60882Z0
105(GALV)
CPLR CPLNG.RED 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WM60882Z0
105(GALV)
UNN UNION 0.50 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WQLE98ZZ0
(GALV)

Package : IPMCS
Report No. : 50 J21A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 76 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J21A Sheet 4 of 4

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Valves Group
GAV VLV.GATE 0.50 1.50 IS:778 CL.2 BODY-IS 318 GR.2 SCRF, CL.2, 3000, B- 51080ZZZ0
LEADED TIN 1.20.1, SHT NO.- 51080
BRONZE,TRIM- IS
320 ALLOY HT2
GAV VLV.GATE 2.00 6.00 IS:780 BODY-IS 210 FLGD, PN1.6, B-16.1, 51380ZZZ0
GR.FG 200,TRIM- FF/125AARH, SHT
IS 320 ALLOY HT2 NO.- 51380
GLV VLV.GLOBE 0.50 1.50 IS:778 CL.2 BODY-IS 318 GR2 SCRF, CL.2, 3000, B- 52080ZZZ0
LEADED TIN 1.20.1, SHT NO.- 52080
BRONZE,TRIM- IS
320 ALLOY HT2
CHV VLV.CHECK 0.50 1.50 IS:778 CL.2 BODY-IS 318 GR2 SCRF, CL.2, 3000, B- 53080ZZZ0
LEADED TIN 1.20.1, SHT NO.- 53080
BRONZE,TRIM- IS
320 ALLOY HT2
CHV VLV.CHECK 2.00 6.00 IS:5312 (PT- BODY-IS 210 FLGD, PN1.6, B-16.1, 53380ZZZ0
1) GR.FG 200,TRIM- FF/125AARH, SHT
IS 320 ALLOY HT2 NO.- 53380
Bolt Group
BOM BOLT.M/C 0.50 6.00 B-18.2 BOLT:A307 BM41519Z0
GR.B(GALV),
NUT:A563
GR.B(GALV)
Gasket Group
GAS GASKET 0.50 6.00 B-16.21- BUTYL RUBBER FULLFACE, 150, 2 MM GKB0422Z0
ANSI B16.5

Package : IPMCS
Report No. : 50 J21A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 77 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J2A Sheet 1 of 5

PIPE CLASS : J2A


RATING : 150
BASE MATERIAL : CS (Galv.)
CORROSION ALLOWANCE : 0 MM
SPECIAL REQUIREMENT :
TEMPERATURE (Deg. C) AND PRESSURE ( Kg/Sq. cm g ) RATINGS
TEMP 0 38 65
PRESS 10.55 10.55 10.55

SERVICE
POTABLE WATER (ABOVE GROUND/ UNDER GROUND ),
FIRE WATER-SPRINKLER SYSTEM AFTER ORIFICE

NOTES
19 THREADED JOINTS SHALL BE MADE WITH 1" WIDTH PTFE JOINING TAPE.
20 SURFACES WHERE GALVANISING HAS BEEN BURNT OFF SHALL BE WIRE BRUSHED AND COLD GALVANISED WITH
ZINC COATING COMPOUND.
151 NDT REQUIREMENT SHALL BE AS PER JOB SPECIFICATION 6922-6-44-0016.
199 FOR U/G SERVICES, PIPE WALL THICKNESSES ARE CALCULATED BASED ON SOIL PARAMETERS AND BURIAL DEPTH
OF 1500MM.

SPECIAL NOTES

ITEM SIZE DESCRIPTION A.CODE


MAINTAINENCE 1.5" & BELOW UNIONS (SCRF) TO BE KEPT MINIMUM
JOINTS
2" & ABOVE FLANGED (SCREWED) TO BE KEPT MINIMUM

PIPE JOINTS UPTO 6" SCREWED COUPLING

DRAINS ON LINES <= 1.5" REFER EIL STD 7-44-0350, DC3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD. 7-44-0351, D3

VENTS ON LINES <= 1.5" REFER EIL STD 7-44-0350, VC3

ON LINES >= 2.0" AS PER P&ID OR 0.75". REFER EIL STD 7-44-0351, V3

TEMP.CONN 1.5" FLANGED. REFER EIL STD 7-44-0353 (NOTE 124)

PRESS.CONN 0.75" SCRD NIPPLE WITH GATE VALVE TO SPEC AS PER EIL STD 7-44-
0354 (NOTE 154)
PIPE JOINTS 8" BUTT WELDED

Package
Report No.
: IPMCS
: 50
J2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 78 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J2A Sheet 2 of 5

72. 72.
70. 70.
68. 68.
66. 66.
64. 64.
62. 62.
60. 60.
58. 58.
56. 56.
54. 54.
52. 52.
50. 50.
48. 48.
46. 46.
44. 44.
BRANCH PIPE (SIZE IN INCHES)
BRANCH PIPE ( SIZE IN INCHES)

42. 42.
40. 40.
38. 38.
36. 36.
34. 34.
32. 32.
30. 30.
28. 28.
26. 26.
24. 24.
22. 22.
20. 20.
18. 18.
16. 16.
14. 14.
12. 12.
10. 10.
8.0 8.0
6.0 T 6.0
5.0 5.0
4.0 T T 4.0
3.5 3.5
3.0 T T T 3.0
2.5 2.5
2.0 T T T T 2.0
1.5 T T T T T 1.5
1.25 1.25
1.0 T T T T T T 1.0
0.75 T T T T T T T 0.75
0.5 T T T T T T T T 0.5
1.000
1.250
1.500
2.000
2.500
3.000
3.500
4.000
5.000
6.000
.500
.750

RUN PIPE (SIZE IN INCHES)

CODE DESCRIPTION
F SADDLE FUSED JT T TEES J THREADOLET

H H. COUPLING W WELDOLETS

P PIPE TO PIPE I INSTRUMENT TEE

R REINFORCED X Refer Notes

S SOCKOLETS L SWEEPOLET

Package
Report No.
: IPMCS
: 50 J2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 79 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J2A Sheet 3 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Pipe Group
PIP PIPE 0.50 6.00 HVY IS-1239-I IS-1239 (GALV) SCRM, WELDED PI6D599Z0

PIP PIPE 8.00 8.00 6.0 IS-3589 IS-3589 GR.330 BE, WELDED PI7E219Z0
(GALV)
NIP NIPPLE 0.50 1.50 M IS-1239-I IS-1239 (GALV) TOE, WELDED PN6D5G9Z0

Flange Group
FLG FLNG.SCRD 0.50 6.00 B-16.5 ASTM A 150, FF/125AARH FTC0721Z0
105(GALV.)
FLG FLNG.SO 8.00 8.00 B-16.5 ASTM A 150, FF/125AARH FNC0721Z0
105(GALV.)
FLB FLNG.BLIND 0.50 8.00 B-16.5 ASTM A 150, FF/125AARH FBC0721Z0
105(GALV.)
FEF FLNG.FIG.8 0.50 8.00 ASME- ASTM A 150, FF/125AARH FGK0721Z0
B16.48 105(GALV.)
Fitting Group
ELB90 ELBOW.90 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WA60882Z0
105(GALV)
ELB90 ELBOW.90 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WALE98ZZ0
(GALV)
ELB90 ELBOW.90 8.00 8.00 M B-16.9 ASTM A 234 BW, 1.5D WAG764Z10
GR.WPB-W(GALV)
ELB45 ELBOW.45 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WB60882Z0
105(GALV)
ELB45 ELBOW.45 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WBLE98ZZ0
(GALV)
ELB45 ELBOW.45 8.00 8.00 M B-16.9 ASTM A 234 BW, 1.5D WBG764Z10
GR.WPB-W(GALV)
TEQ T.EQUAL 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WE60882Z0
105(GALV)
TEQ T.EQUAL 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WELE98ZZ0
(GALV)
TEQ T.EQUAL 8.00 8.00 M B-16.9 ASTM A 234 BW WEG764ZZ0
GR.WPB-W(GALV)
TRED T.RED 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WR60882Z0
105(GALV)
TRED T.RED 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WRLE98ZZ0
(GALV)
TRED T.RED 8.00 8.00 M, M B-16.9 ASTM A 234 BW WRG764ZZ0
GR.WPB-W(GALV)
REDC REDUC.CONC 0.50 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WULE98ZZ0
(GALV)
REDE REDUC.ECC 0.50 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WVLE98ZZ0
(GALV)

Package : IPMCS
Report No. : 50 J2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 80 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J2A Sheet 4 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Fitting Group
SWGC SWAGE.CONC 0.50 3.00 M, M BS-3799 ASTM A TBE WNH08EZZ0
105(GALV)
SWGE SWAGE.ECC 0.50 3.00 M, M BS-3799 ASTM A TBE WPH08EZZ0
105(GALV)
CAP CAP 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WF60882Z0
105(GALV)
CAP CAP 2.00 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WFLE98ZZ0
(GALV)
CPLF CPLNG.FULL 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WJ60882Z0
105(GALV)
CPLH CPLNG.HALF 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WK60882Z0
105(GALV)
CPLL CPLNG.LH 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WL60882Z0
105(GALV)
CPLR CPLNG.RED 0.50 1.50 B-16.11 ASTM A SCRF, 3000 WM60882Z0
105(GALV)
UNN UNION 0.50 6.00 IS-1239-II IS-1239(PART-II) SCRF, NA WQLE98ZZ0
(GALV)
Valves Group
GAV VLV.GATE 0.50 1.50 IS:778 CL.2 BODY-IS 318 GR.2 SCRF, CL.2, 3000, B- 51080ZZZ0
LEADED TIN 1.20.1, SHT NO.- 51080
BRONZE,TRIM- IS
320 ALLOY HT2
GAV VLV.GATE 2.00 8.00 IS:780 BODY-IS 210 FLGD, PN1.6, B-16.1, 51380ZZZ0
GR.FG 200,TRIM- FF/125AARH, SHT
IS 320 ALLOY HT2 NO.- 51380
GLV VLV.GLOBE 0.50 1.50 IS:778 CL.2 BODY-IS 318 GR2 SCRF, CL.2, 3000, B- 52080ZZZ0
LEADED TIN 1.20.1, SHT NO.- 52080
BRONZE,TRIM- IS
320 ALLOY HT2
CHV VLV.CHECK 0.50 1.50 IS:778 CL.2 BODY-IS 318 GR2 SCRF, CL.2, 3000, B- 53080ZZZ0
LEADED TIN 1.20.1, SHT NO.- 53080
BRONZE,TRIM- IS
320 ALLOY HT2
CHV VLV.CHECK 2.00 6.00 IS:5312 (PT- BODY-IS 210 FLGD, PN1.6, B-16.1, 53380ZZZ0
1) GR.FG 200,TRIM- FF/125AARH, SHT
IS 320 ALLOY HT2 NO.- 53380
Bolt Group
BOM BOLT.M/C 0.50 8.00 B-18.2 BOLT:A307 BM41519Z0
GR.B(GALV),
NUT:A563
GR.B(GALV)
Gasket Group
GAS GASKET 0.50 8.00 B-16.21- BUTYL RUBBER FULLFACE, 150, 2 MM GKB0422Z0
ANSI B16.5

Package : IPMCS
Report No. : 50 J2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved
JOB SPECIFICATION No.
PIPING MATERIAL
6922-6-44-0005 Rev. 0
SPECIFICATION
Page 81 of 81

Client : HMEL Dept./Sect. : 16/43


Project : GGSRP

Location : BATHINDA Pipe Class : J2A Sheet 5 of 5

Note :(The shaded portion of PMS body shows Field Fabricated Items)

Input Item Lower Upper Sch/ Commodity Note


Size Size Thk Dmn. STD Material Description Code No
Id. Type
(Inch) (Inch)
Gasket Group
GAS GASKET 8.00 8.00 B-16.21- GRAPHITE WITH RING, 150, 2 MM GKBAA52Z0
ANSI B16.5 SS316 TANGED
INS

Package : IPMCS
Report No. : 50 J2A
Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL- All rights reserved

You might also like