6/19/2023

VECV Infrastructure Norms

a
VECV Infrastructure Norms

1. Façade ACP Cladding & Lit Branding

2. Flooringp name (slide #8).
3. Paint/Colors
4. Lighting & Electrical Hardware.
5. Furniture & Office Partition
6. CI Branding & Staff Uniform

2
VECV Infrastructure Norms – Façade ACP Cladding & Lit Branding

CI Branding by
VECV Vendor

ACP as per
VECV Norms

OWV VECV
Branding
(optional)

Transparent
Glass

3
VECV Infrastructure Norms – Façade ACP Cladding & Lit Branding
ACP specs
Product Description Aluminum Composite panel with 3mm thickness
Aluminum Coil Thickness 0.25mm
Core LDPE (Low Density Polyethylene)
Coating PVDF
Grade Exterior
ACP Brand ALUTECH , ALSTONE
Color Bright Silver
Color Code ALUTECH : EX-101
ALSTONE : VL - 04

ACP Cladding: Additional Guidelines:

•It is recommended to install ACP panels in the same direction as marked arrow on the protective peel-off-film to avoid possible reflection differences.
•The protective peel off film should be removed within 45 days of installation.
•To ensure color consistency, it is advised to source the total ACP requirement for a project in a single lot.
•Weatherproof silicon (Grey color) should be used as sealant for ACP panels
• Recommended Aluminum tube/section – 50 mm x25mm in 16-gauge.
•Recommended Panel Size – To be placed vertically: 6ft (height) x 4ft (Width)
Glazing Options
Transparent Glass Option:
Technical Specs: 12mm thick toughened glass.
Make: Modifloat/Saintgobain/Asahi India/Equivalent
Reflective Glass Option:
Technical Specs: min. 5mm thick Oceanic Blue toughened glass.
Make: Asahi India/Equivalent.

4
VECV Infrastructure Norms – Façade ACP Cladding & Lit Branding
Painting at Non ACP Facade

Paint for Façade of the facility

VECV recommends 2 options:

Option 1:
Make: Asian Paints Ltd.
Code : Armour – N (0686).
Product: Apex Ultima Exterior Emulsion.

Option 2:
Make: Kansai Nerolac Paints Limited.
Code :
Base IEM 1 1 Ltr
ER 1.36 ml
BK 3.87 ml

Product: Nerolac Excel Mica Marble

5
VECV Infrastructure Norms – Flooring
S No. Description Material Specifications Colour/Material Code Supplier
All Types of Flooring Specs
1 Roads Bitumen Black Local
All parking areas, Outdoor New Combination of grey and red paver blocks
2 Inter-locking paving blocks OR Bitumen Local
Vehicle Display Area. Black (in case of Bitumen)
RAL 7035 for epoxy. For epoxy: Cipy Polyeurethene Pvt. Ltd.
Epoxy Flooring Vitrified Tiles: For vitrified tiles:
3 New Vehicle Display Area OR Option #1- Model: Donapaula (Endura Sandex) Option #1 Prism Johnson Ltd.
Vitrified Tile of size 600 X 600 mm, 10mm Thick, Matt finish. Option #2 - Model: Grey Granite – 393 Option #2 - Murudeshwar Ceramics Ltd.

All Sales and Service Office/ Option #1- Model: Candolim (Endura Sandex) Option #1 Prism Johnson Ltd.
4 Vitrified Tile of size 600 X 600 mm, 10mm Thick, Matt finish.
Customer Areas, Back Office etc. Option #2 - Model: Super White Granite – 330. Option #2 - Murudeshwar Ceramics Ltd.
Toilets, Washroom and Pantry of
5 Ranger Beige/Matt Finish
Office and Customer Area
Ceramic Tiles- 300 x 300 mm tiles Kajaria Ceramics or equivalent
Toilets and Washrooms of Drivers
6 Granalia Grey/Matt Finish
and workshop staff.
7 Staircase Area Kota stone Grey Local
All Utility rooms (except OH room), Providing and laying granolithic flooring 100mm thick in 1:2:4
8
Driver overnight, Security Guard concrete – vacuumed-watered adding necessary hardner

200 mm Rubble Soiling for PCC (PCC 1:3:6 for footing) with all
necessary Compacting, Reinforcement steel and granolithic flooring
9 Workshop Bays
with 150mm thick in 1:2:4 concrete(M25) – vacuumed-watered adding
necessary hardner Cement Finish Local
Interlocking Blocks –
Rubber moulded pavers – M40 with 80 mm thickness.
Normal concrete pavers – M40 with 100 mm thickness. Over
10 Workshop Drive-way & open area
compacted bed of sand/stone dust of 40mm thickness. OR
Providing and laying granolithic flooring 100mm thick in 1:2:4
concrete – vaccumed-watered adding necessary hardner
Epoxy Flooring RAL 7035 for epoxy. For epoxy: Cipy Polyeurethene Pvt. Ltd.
11 Aggregate OH Room OR OR OR
Jointless Kota Stone Flooring (Thickness 25mm) Grey Kota Stone Local

6
VECV Infrastructure Norms – Painting/Colour Norms
S No. Description Material Specifications Colour/Material Code Supplier
Paint/Epoxy Norms : Bay/Parking/Aisle Marking Norms
Epoxy coating - 150mm (6") wide. Provide one coat nito prime 25 Epoxy coating – Yellow OR Epoxy - Cipy Polyurethanes Pvt. Ltd.
Bay Markings
on the prepared surface followed by applying self-leveling epoxy Paint – Paint-
1 Parking marking
floor topping 1mm thick. Option #1 Lemon Ole-X105 (Royal Shine Emulsion). Option #1- Asian Paints.
Aisle Marking
150mm (6”) wide marking of min 3 paint coats. Option #2: Lemon Ole X105 (Nerolac Impressions) Option #2 - Kansai Nerolac Paints
Paint/Laminate Norms: Main Entry Gates, Room Doors, Grills and Windows
Entry gate, all Metallic Armour – N (0686) - Apcolite Premium gloss enamel Asian Paints Ltd
1 Enamel Paint Finish
Grills, Windows, Fencing Armour – N (0686) - Nerolac Synthetic Enamel Kansai Nerolac Paints Limited
Room Doors - Customer
2 Laminate at doors Laminate: Merino – 21187 Champagne Suede. Merino Laminates
Area's, Sales & Service
Option #1 - Smoke-N-0616 Royal Shine Emulsion. Asian Paints Ltd
3 Doors of Utility rooms Enamel Paint Finish
Option #2 - Smoke-N 0616 (Nerolac Impressions) Kansai Nerolac Paints Limited

Paint Norms : Walls Finishes

Interior Wall Finishes -
1 All areas except walls of Moonlight L - 121 (Royal)
workshop Area’s
Smoke-N-0616 Royal Shine Emulsion upto 1830 mm
Interior Wall Finishes – Interior Emulsion Paint Painting with plastic emulsion paint ensuring Asian Paints Ltd
2 that the plaster is completely dry, clean and completely free of above floor level, Scarlet – 8085 Royal Shine Emulsion
Workshop Area’s Kansai Nerolac Paints Limited
dust etc. and ensure that no water leakage or seepage. band of 150 mm and then Moonlight L- 121.till roof
All Exterior Walls (except
3
façade of the facility)
Miraj White – 8276
4 Compound Wall

Roofing and Roof Truss (Workshop Shed Height – Min 20 ft clear height)
Fabricating and erecting pre -engineered building as per metal
1 Roof Truss Silver As per Pre-engineered Building specifications
building manufacturer
2 Roofing Mixed pattern of painted Galvalum 0.55mm & polycarbonate sheets Blue/ Silver & Transparent CRIL/ METACOLOUR

Walls Tiles – Pantry & Toilet Area

1 Walls of Pantry & Toilet Ceramic Tiles- Size 450 x 300 mm 8mm Thick Crema , Glossy finish Kajaria Ceramics or equivalent

7
VECV Infrastructure Norms – Lighting & Electrical Hardware

S No. Description Material Specifications Colour/Material Code Supplier

Lighting Solutions
False Ceiling - Front Office, Conference LED Recess type of 9 - 12W
Option #1 – Model: DN172B LED 10S.
1 Room and all other Sales and Service (depending upon clear height of the
Option #2 - Model: LD90-141-XXX-65-XX.
Customer Area’s area).
False Ceiling – Indoor Vehicle display area Option #1 Model: RS271B LED 40.
2 LED Recess type of 40W.
and double height areas. Option #2 Model: LD59-501-036-40-XX.
Option #1- Model: BY325P LED100S CW PSE GR FG NB PB/Street light. Option #1 – Philips.
Workshop Floor Area and Spare Parts
3 LED of 80 – 90W. Option#2- Model: LH14-102-XXX-57-SM. Floodlight/Canopy Surface Option #2 - Wipro or
Section of full height
Type. equivalent
All workshop utility rooms/area’s and low Option #1- Make Philips. Model: BN021 LED 20S.
4 LED tube Rod of 15 - 18W
height spare parts section Option#2- Make: Wipro. WIO- 921208+LL13-181-650.

Vehicle movement area, Parking and other LED of 60 - 70W Street light with Option #1- Model: BRP408LEDHP CW240VPSUGR70W.
5
outdoor areas. Pole. Option#2- Model: LR02 – 671-XXX-57-G2.

Electrical Hardware
1 Sales and Service office, Customer areas. Switches, Sockets etc. Arteor series/White Legrand India or equivalent
2 Workshop and all Utility areas. Switches, Sockets etc. Mylinc series/Matt Grey. Legrand India or equivalent

Power Back up Solutions

1 Diesel Generator Range: 30 to 160kVA Power Nodes: 30kVA/40kVA/62.5kVA/82.5kVA/125kVA/160kVA Engine Brand: Eicher

8
VECV Infrastructure Norms – Furniture Norms, CI Branding & Staff Uniform
S No. Element Description Colour/Material Specification Supplier
Furniture Guidelines
All types of Office Tables, Drawers, Conference Table, OH Modular Furniture having Merino – 21187 Champagne Suede (Sizes
1
Storage Units. of tables as per approved layout)

2 Round Discussions Tables, Centre Table SS framed 3ft dia. glass top.
3 Document/File Storage Unit Steel Units of Silver/Grey. Size (78x36x19 inch ) double glass door
Brand Name – Responsive Fabric India Pvt. Ltd
Office Chair: Locally manufactured
Sitting - Material - Fabric. Code - BM-15 Black (Blossom range)
4 Chairs/Cushioned Sofa
Chair Back - Material – Mesh. Code - AM-01 Black (Mesh2 range)
Cushioned Sofa.
Material - Fabric. Code - BM-15 Black (Blossom range).
Works-floor Utility Tables, Lunch Table, Bunk Bed, Painted with Grey Matter 8304 (Asian Paints/Kansai Nerolac
5
Locker/cupboard, Racks Paints)
6 Sofa for Service Customer Lounge 3 or 2 Seater SS Sofa

Office Partition
Fixed glazing using combination of 6 mm glass in laminate
Laminate: Merino – 21187 Champagne Suede.
on board. Frame work also may of prefabricated Laminate: Merino .
Glass – Transparent/Etched Glass.
1 aluminum frame. Frame should be secured to firm support Glass - Saint Gobain.
Powder Coated Aluminum Frame (Color equivalent to Moonlight L
with bolt of appropriate size. For solid partitions use solid Aluminum section – Hindalco/Equivalent
- 121 (Royal)
boards having laminates on both sides.
Crates and Bins
1 Bins FPO Bin 25 & FPO Bin 35 (Blue)
Nilkamal Ltd.
2 Crates CH64220 & Crate CH43150 (Blue)

Dealership CI Branding
AGX, Bangalore – South & West Regions
1 CI Branding Elements Elements as approved by VECV
VVT Communications, Noida – North, Central & East Regions
Dealership Staff Uniform
1 Entire staff uniform Elements As approved by VECV The Saraogi Clothing Company, Chennai

9
Thank You !

10