Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Data Sheet 3D 40-125 4.06

    Uploaded by

    Cristopher Jimenez Jaramillo
    The document contains technical specifications for a centrifugal pump model 3D 40-125/4.06 including its type, materials, dimensions, performance curves, and construction details. Key specifications include a flow rate of 12-50 m3/h, maximum head of 22.7 m, maximum shaft power of 4.29 kW, impeller diameter of 140 mm, and a total weight of 45.7 kg for the pump and motor assembly. The pump is designed to operate at 3480 rpm with water as the working fluid at 20°C and 998.3 kg/m3 density.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Data Sheet 3D 40-125 4.06

    Uploaded by

    Cristopher Jimenez Jaramillo
    19 views6 pages
    The document contains technical specifications for a centrifugal pump model 3D 40-125/4.06 including its type, materials, dimensions, performance curves, and construction details. Key specifications include a flow rate of 12-50 m3/h, maximum head of 22.7 m, maximum shaft power of 4.29 kW, impeller diameter of 140 mm, and a total weight of 45.7 kg for the pump and motor assembly. The pump is designed to operate at 3480 rpm with water as the working fluid at 20°C and 998.3 kg/m3 density.

    Original Title

    Data_sheet_3D_40-125_4.06_

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains technical specifications for a centrifugal pump model 3D 40-125/4.06 including its type, materials, dimensions, performance curves, and construction details. Key specifications include a flow rate of 12-50 m3/h, maximum head of 22.7 m, maximum shaft power of 4.29 kW, impeller diameter of 140 mm, and a total weight of 45.7 kg for the pump and motor assembly. The pump is designed to operate at 3480 rpm with water as the working fluid at 20°C and 998.3 kg/m3 density.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views6 pages

    Data Sheet 3D 40-125 4.06

    Uploaded by

    Cristopher Jimenez Jaramillo
    The document contains technical specifications for a centrifugal pump model 3D 40-125/4.06 including its type, materials, dimensions, performance curves, and construction details. Key specifications include a flow rate of 12-50 m3/h, maximum head of 22.7 m, maximum shaft power of 4.29 kW, impeller diameter of 140 mm, and a total weight of 45.7 kg for the pump and motor assembly. The pump is designed to operate at 3480 rpm with water as the working fluid at 20°C and 998.3 kg/m3 density.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Technical Data Pump Name 3D 40-125/4.

    06

    Customer Date 2023-11-29 Company


    Contact Item no. Issued by
    Phone Project Phone
    E-mail Project ID E-mail

    Requested data
    1 Pump type CENTRIFUGAL PUMPS Fluid Water
    2 Number of pumps / Reserve 1 / 0 Liquid temperature °C 20
    3 Flow m³/h Kin. viscosity mm²/s 1.005
    4 Head m Vapour pressure psi 0.3394
    5 Geodetic head m PH value
    6 Inlet pressure (pin) psi 0 Density kg/m³ 998.3
    7 Available system NPSH Solids Weight % 0
    8 Ambient temperature °C 20

    Pump
    9 Pump Name 3D 40-125/4.06 Frequency Hz 60
    10 Design CENTRIFUGAL PUMPS Installation type STANDARD
    11 Manufacturer EBARA Impeller Max. mm 140
    12 Speed 1/min 3480 Diameter Designed mm 140
    13 No. of Stage 1 Min. mm 140

    14 Connection Suction side EN 1092-2 Flow Operating m³/h


    15 Connection Discharge side EN 1092-2 Max- m³/h 50

    16 Max Working Pressure psi 145.03 Min- m³/h 12


    17 Shut-off head psi 52.56 Head Operating m
    18 Total weight kg See the table of "Dimensions". - (Qmax.) m 22.7
    19 Shaft power kW - (Qmin.) m 36.5
    20 Max. Shaft Power at max. impeller kW 4.29

    21 Required pump NPSH m Efficiency %

    Materials
    22 Impeller AISI 304
    23 Casing Cast iron
    24 Shaft AISI 304 (wet extension)
    25
    26
    27

    Motor
    28 Manufacturer EPE Standard Insulation class F
    29 Type TEFC_3D 40-125/4.06_220_Three Phase Phases 3~
    30 Specific design IE3 / 60 Hz / Pole pairs 1 Frame size
    31 Rated power kW 4 Weight kg
    32 Number of poles 2 Electric voltage V 220
    33 Speed 1/min 3500 Electric current A 13.5
    34 Degree of protection IP 55
    35

    Remarks
    Performance Curve Pump Name 3D 40-125/4.06

    Customer Date 2023-11-29 Company


    Contact Item no. Issued by
    Phone Project Phone
    E-mail Project ID E-mail

    Requested data Pump


    1 Flow m³/h Operating flow m³/h Frequency Hz 60
    2 Head m Operating head m Number of poles 2
    3 Geodetic head m Impeller diameter designed mm 140 Speed 1/min 3480

    Test standard: ISO 9906:2012 - Grade3B Water; 20°C; 998.3kg/m³; 1mm²/s

    H/ m Head — Ø 140 ∆p / psi

    35 50

    Frequency 45

    30

    Eff. 73.8%
    40

    25
    35

    P₂ / kW Shaft power P2

    4
    3.8
    3.6
    3.4
    3.2
    3
    2.8
    2.6
    2.4
    η/% Hydraulic efficiency

    70

    60

    50

    NPSH / m NPSH-values

    0 4 8 12 16 20 24 28 32 36 40 44 48 Q / m³/h
    Dimensions Pump Name 3D 40-125/4.06

    Customer Date 2023-11-29 Company


    Contact Item no. Issued by
    Phone Project Phone
    E-mail Project ID E-mail

    Dimensions in mm

    1 A 213 H1 112
    2 A1 108 H2 140
    3 A2 112 H3 141
    4 B 494 M 100
    5 C 253 N1 160
    6 Dia D1 185 N2 210
    7 Dia D2 150 R 80
    8 Dia DN1 65 S1 20
    9 Dia DN2 40 S2 18
    10 Dia K1 145 T 50
    11 Dia K2 1410 V2 M20x1.5
    12 Dia P1 122 W 70
    13 Dia P2 88 Weight P&M 45,7 kg
    14 E 10
    15 H 252
    (1/3)
    Construction Pump Name 3D 40-125/4.06

    Customer Date 2023-11-29 Company


    Contact Item no. Issued by
    Phone Project Phone
    E-mail Project ID E-mail
    (2/3)
    Construction Pump Name 3D 40-125/4.06

    Customer Date 2023-11-29 Company


    Contact Item no. Issued by
    Phone Project Phone
    E-mail Project ID E-mail
    (3/3)
    Construction Pump Name 3D 40-125/4.06

    Customer Date 2023-11-29 Company


    Contact Item no. Issued by
    Phone Project Phone
    E-mail Project ID E-mail

    You might also like