Manage mailbox databases in Exchange

Server

A mailbox database is a unit of granularity where mailboxes are created and

stored. A mailbox database is stored as an Exchange database (.edb) file. In

Exchange 2016 and 2019, each mailbox database has its own properties that

you can configure.

What do you need to know before you begin?

 Estimated time to complete each procedure: 10 minutes

 To open the Exchange admin center (EAC), see Exchange admin

center in Exchange Server. To open the Exchange Management

Shell, see Open the Exchange Management Shell.

 You need permissions before you can perform this procedure or

procedures. To see what permissions you need, see the "Mailbox

databases" entry in the Recipients Permissions topic.

 For information about keyboard shortcuts that may apply to the

procedures in this topic, see Keyboard shortcuts in the Exchange

admin center.
Tip

Having problems? Ask for help in the Exchange forums. Visit the forums

at: Exchange Server, Exchange Online, or Exchange Online Protection.

Create a mailbox database

Use the EAC to create a mailbox database

1. From the Exchange admin center (EAC), navigate to Servers.

2. Select Databases, and then click the + symbol to create a

database.

3. Use the new database wizard to create your database.

Use the Exchange Management Shell to create a mailbox

database

For an example of how to create a mailbox database, see Example 1 in New-

MailboxDatabase.

How do you know if this process has worked?

To verify that you have successfully created a database, implement the

following tasks:
  From the EAC, verify that the mailbox database you created is

listed on the Databases page.

 From the Exchange Management Shell, verify that the database

was created on server Mailbox01 by running the following

command.

PowerShellCopy
Get-MailboxDatabase -Server "Mailbox01"

Get mailbox database properties

For detailed syntax and parameter information, see Get-MailboxDatabase.

Use the Exchange Management Shell to get mailbox database

properties

For an example of how to get mailbox database properties, see Example 3

in Get-MailboxDatabase.

How do you know if this process worked?

To verify that you have successfully retrieved your mailbox database

information, implement the following task:

 From the Exchange Management Shell, verify that all your mailbox

database information is represented correctly.

Set mailbox database properties

Use the EAC to set mailbox database properties

1. From the EAC, navigate to Servers.

2. Select Databases, and then click to select the mailbox database

you want to configure.

3. Click Edit to configure the attributes of a mailbox database.

4. Use the General tab to view status about the mailbox database,

including the mailbox database path, last backup, and mailbox

database status:

 Database path: This read-only field displays the full

path to the Exchange database (.edb) file for the

selected mailbox database. To view the entire path,

you may have to click the path and use the Right

Arrow key. You can't use this field to change the path.

To change the location of the database files, use

the Move-DatabasePath cmdlet.

 Last full backup: This read-only field displays the

date and time of the last complete backup of the

mailbox database.
  Last incremental backup: This read-only field

displays the date and time of the last incremental

backup of the mailbox database.

 Status: This read-only field displays whether the

mailbox database is mounted or dismounted.

 Mounted on server: This read-only field displays

which server the database is mounted on.

Note

This article contains references to the term master, a term that

Microsoft no longer uses. When the term is removed from the

software, we'll remove it from this article.

 Master: This read-only field displays the primary

server for the mailbox database. The Mailbox server

that hosts the active copy of a database is referred to

as the mailbox database master.

 Master type: This read-only field displays the type of

mailbox database master.

 Modified: This read-only field displays the date and

time the database was last modified.

  Servers hosting a copy of this database: This read-

only field displays the other servers that have a copy

of this database.

5. Use the Maintenance tab to configure mailbox database settings,

including specifying a journal recipient, setting a maintenance

schedule, and mounting the database at startup:

 Journal Recipient: Click Browse to specify a recipient

to enable journaling on this mailbox database.

Remove the recipient listed to disable journaling.

 Maintenance schedule: Use this list to select one of

the preset maintenance schedules. You can also

configure a custom schedule. To configure a custom

schedule, click Customize.

 Enable background database maintenance (24 x 7

ESE scanning): Select this check box to enable online

database scanning, which runs continuously in the

background. Online database scanning performs a

checksum calculation of the database and performs

operations that allow Exchange to scan for lost space

on the database and recover it. If you select this check

box, Exchange scans the database no more than one

 time per day and will issue a warning event if it can't

finish scanning the database in a seven-day period.

 Don't mount this database at startup: Select this

check box to prevent Exchange from mounting this

mailbox database when it starts.

 This database can be overwritten by a restore:

Select this check box to allow the mailbox database to

be overwritten during a restore process.

 Enable circular logging: Select this check box to

enable circular logging.

6. Use the Limits tab to specify the storage limits, the warning

message interval, and the deletion settings for a mailbox

database:

 Issue warning at (GB): Select this check box to

automatically warn mailbox users that their mailbox is

approaching its storage limit. To specify the storage

limit, select the check box, and then specify in

gigabytes (GB) how much content can be stored in

the mailbox before a warning email message is sent

to the mailbox users. You can enter a value from 0

through 2,097,151 megabytes (MB) (2.0 terabytes).

 Prohibit send at (GB): Select this check box to

prevent users from sending new email messages after

the size of their mailbox reaches the specified limit.

To specify this limit, select the check box, and then

type the size of the mailbox in GB at which you want

to prohibit the sending of new email messages and

notify the user. You can enter a value from 0 through

2,097,151 MB (2.0 terabytes).

 Prohibit send and receive at (GB): Select this check

box to prevent users from sending and receiving

email messages after their mailbox size reaches the

specified limit. To specify this limit, select the check

box, and then type the size of the mailbox in GB at

which you want to prohibit the sending and receiving

of email messages and notify the user. You can enter

a value from 0 through 2,097,151 MB (2.0 terabytes).

 Keep deleted items for (days): Select this check box

to set the number of days that deleted items are

retained in a mailbox. You can enter a value from 0

through 24,855 days.

 Keep deleted mailboxes for (days): Select this check

box to set the number of days that deleted mailboxes

 are retained. You can enter a value from 0 through

24,855 days.

 Don't permanently delete items until the database

has been backed up: Select this check box to prevent

mailboxes and email messages from being deleted

until after the mailbox database has been backed up.

7. Use the Client Settings tab to select the offline address book

(OAB) for the mailbox:

 Offline address book: To select an offline address

book, click Browse, and then select the offline

address book.

Use the Exchange Management Shell to set mailbox database

properties

For an example of how to set mailbox database properties, see Example 1

in Set-MailboxDatabase.

How do you know this process worked?

To verify that you have successfully set the attributes, implement the following

tasks:

 Verify that your changes are saved in the EAC.

  From the Exchange Management Shell, run the following

command to retrieve mailbox database properties.

PowerShellCopy
Get-MailboxDatabase -Identity MailboxDatabase01 -
Status | Format-List

Move a mailbox database path

For detailed syntax and parameter information, see Move-DatabasePath.

Use the Exchange Management Shell to move a mailbox

database path

For an example of how to set mailbox database properties, see Example 1

in Move-DatabasePath.

How do you know this process has worked?

To verify that you have successfully moved the database path, implement the

following steps:

1. From the EAC, select Servers > Databases, and then click to

select the appropriate mailbox.

2. Click the pen symbol and verify that the database path is correct.
Mount a mailbox database

For detailed syntax and parameter information, see Mount-Database.

Use the Exchange Management Shell to mount a mailbox

database

For an example of how to mount a mailbox database, see Example 1

in Mount-Database.

How do you know whether this process worked?

To verify that you have successfully mounted the mailbox database,

implement the following task:

 From the Exchange Management Shell, run the following

command to retrieve mailbox database properties for all mailbox

databases.

PowerShellCopy
Get-MailboxDatabase -IncludePreExchange2013

Dismount a mailbox database

For detailed syntax and parameter information, see Dismount-Database.

Use the Exchange Management Shell to dismount a mailbox

database

For an example of how to dismount a mailbox database, see Example 1

in Dismount-Database.

How do you know whether this process has worked?

To verify that you have successfully dismounted the database, implement the

following steps:

1. From EAC, select Servers > Databases, and then click to select

the appropriate mailbox.

2. Click the pen symbol, and verify that the database status

is Dismounted.

Remove a mailbox database

Use the EAC to remove a mailbox database

1. From the EAC, select Servers > Databases, and then click to

select the appropriate mailbox.

2. Click Delete to remove the mailbox database.

Use the Exchange Management Shell to remove a mailbox

database

For detailed syntax and parameter information, see Remove-MailboxDatabase.

1. Run the following command to remove the mailbox database

MyDatabase.

PowerShellCopy
Remove-MailboxDatabase -Identity "MyDatabase"

2. When you're prompted about whether you're sure that you want

to perform the action, type Y.

3. When the dialog box appears stating that the database was

removed successfully, note the location of the Exchange database

(.edb) file. If you want to remove this file from the hard drive, you

must remove it manually.

How do you know if this process had worked?

To verify that you have successfully removed the mailbox database,

implement the following tasks:

 From the EAC, select Servers > Databases.

 Verify that the mailbox database has been removed.