Analaysis 2021 in Excel

Analysis of Item
1.1.1 1.1 Carriage of Materials by mechanical transport including loading, unloading and
stacking
1.1.1 Lime, :
moorum, building rubbish
Code Description Rate Unit
Cost for one truck load of capacity 8 cum
(Net 8 cum after deduction of looseness)
1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip
1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip
1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip
1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip
1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip
1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

Analysis)
1.1.Y Rate of 1 trip for 11 to 20 Km Lead (Sub 80.90 km
Analysis)
1.1.Z Rate of 1 trip for above 20 Km Lead (Sub 66.10 km
Analysis)
TOTAL
Add 12% GST applicable on work contract,
by reversible method (multiplying factor
0.1405)
TOTAL
Add 15 % for contractor's profit and
overheads
TOTAL
Add 1 % for Labour Cess
Cost for 8 cum
Cost for 1 cum
Say
stacking :
1.1.2 Earth
(Net 6.4 cum after deduction of looseness)

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 6.4 cum
Cost for 1 cum
Say
stackingor: sludge
1.1.3 Manure


Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 7.36 cum
Cost for 1 cum
Say
stacking : rock
1.1.4 Excavated


Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 4 cum
Cost for 1 cum
Say
stacking
1.1.5 Sand, : aggregate below 40 mm nominal size
stone

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 8 cum
Cost for 1 cum
Say
stacking
1.1.6 Stone :
aggregate 40 mm nominal size and above

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 7.36 cum
Cost for 1 cum
Say
stacking
1.1.7 Soling :
stone

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 6.8 cum
Cost for 1 cum
Say
stacking :
1.1.8 Bricks
Cost for one truck load of capacity 3000
brcks

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 3000 Bricks
Say
stacking
1.1.9 Brick :
Tiles
Cost for one truck load of capacity 5000
Bricks

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking stone
1.1.10 Cement, : blocks, G.I.. C.I., A.C., & C.C.pipes below 100 mm dia and other
heavy materials
Cost for one truck load of capacity 9 tonne


Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 9 tonne
Cost for 1 tonne
Say
stacking :
1.1.11 Steel

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 9 tonne
Cost for 1 tonne
Say
stacking :
1.1.12 Timber

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 7 cum
Cost for 1 cum
Say
stacking
1.1.13 Tar :
Bitumen

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 8 tonne
Cost for 1 tonne
Say
stacking :
1.1.14 Solvent, diesel
Cost for one truck load of capacity 80 quintal

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 80 quintal
Cost for 1 quintal
Say
stacking
1.1.15 Steam :
coal


Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 7 tonne
Cost for 1 tonne
Say
1.1.16.1 1.1 Carriage of Materials by mechanical transport including loading, unloading and
stacking
1.1.16 S.W. pipe:
1.1.16.1 100 mm dia
Cost for one truck load of capacity 600 m
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 600 m pipes
Say
stacking
1.1.16 S.W. pipe:
1.1.16.2 150 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.16 S.W. pipe:
1.1.16.3 200 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.16 S.W. pipe:
1.1.16.5 250 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.16 S.W. pipe:
1.1.16.6 300 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 84 m pipes
Say
stacking
1.1.16 S.W. pipe:
1.1.16.7 350 mm dia
pipes


Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 60 m pipes
Say
stacking
1.1.16 S.W. pipe:
1.1.16.8 400 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 42 m pipes
Say
stacking
1.1.16 S.W. pipe:
1.1.16.9 450 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 33 m pipes
Say
stacking
1.1.16 S.W. pipe:
1.1.16.10 500 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 30 m pipes
Say
stacking
1.1.16 S.W. pipe:
1.1.16.11 600 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 24 m pipes
Say
stacking
1.1.17 R.C.C. :
pipes, A.C. pipes, steel cylinder, R.C. pipes, C.I. pipes and unreinforced
cement
1.1.17.1 100 mm pipes
dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement
1.1.17.2 125 mm pipes
dia
pipes


Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement pipes
1.1.17.3 150 mm dia
Cost for one truck load of capacity 219.6 m
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 219.6 m pipes
Say
stacking
1.1.17 R.C.C. :
cement pipes
1.1.17.4 200 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement
1.1.17.5 250 mm pipes
dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 95 m pipes
Say
stacking
1.1.17 R.C.C. :
cement
1.1.17.6 300 mm pipes
dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement
1.1.17.7 350 mm pipes
dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement
1.1.17.8 400 mm pipes
dia
pipes


Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement pipes
1.1.17.9 450 mm & 500 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement pipes
1.1.17.10 600, 700, 750 & 800 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement
1.1.17.11 900 mm pipes
dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking
1.1.17 R.C.C. :
cement
1.1.17.12 1000, pipes
1100 & 1200 mm dia
pipes

Analysis)
Analysis)
Analysis)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Say
stacking :of moorum/building rubbish/ malba/ similar unserviceable, dismantled
1.1.18 Disposal
or waste material by mechanical transport including
Code Description loading,
Rate transporting,
Unit
Details of Cost for 3.00 trips of 8 cum
capacity.
LABOUR
0084 Hire charges of truck - 9 tonne (witout POL) 2000.00 day
0114 Beldar 645.00 day

MATERIAL
1235 Diesel oil 80.87 litre
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 3.00 trips of capacity 8 cum
Cost per cum

Say
1.2.1 1.2 Carriage of materials by manual labour including loading, unloading and
stacking
1.2.1 Lime, for lead
moorum, less than
building 0.5 Km :
rubbish
Cost for 35 cum
1.2.A Rate for Manual carriage for first 50 m 4947.15 trip
1.2.B Rate for Manual carriage for additional 50 m 1077.15 trip
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 35 cum
Rate for 1 cum
Say
stacking for lead less than 0.5 Km :
1.2.2 Earth
Cost for 28 cum (after deducting looseness)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 28 cum
Rate for 1 cum
Say
stackingorfor
1.2.3 Manure lead less than 0.5 Km :
sludge
Cost for 32.2 cum (after deducting
looseness)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 32.2 cum
Rate for 1 cum
Say
stacking forrock
1.2.4 Excavated lead less than 0.5 Km :
looseness)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 17.5 cum
Rate for 1 cum
Say
stacking
1.2.5 Sand, for aggregate
stone lead less than 0.540
below Km : nominal size
mm
Cost for 28 cum
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 28 cum
Rate for 1 cum
Say
stacking
1.2.6 Stone for lead 40
aggregate less
mmthan 0.5 Kmsize
nominal : and above
looseness)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 25.9 cum
Rate for 1 cum
Say
stacking
1.2.7 Soling for lead less than 0.5 Km :
stone
looseness)
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 23.8 cum
Rate for 1 cum
Say
1.2.8 Bricks
Cost for 15000 Nos
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 15000 Nos
Rate for 1000 No
Say
stacking
1.2.9 Brick for lead less than 0.5 Km :
Tiles
Cost for 24000 Nos
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 24000 Nos
Rate for 1000 No
Say
stacking
1.2.10 Steam for lead less than 0.5 Km :
Coal
Cost for 30 tonne
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 30 tonne
Rate for 1 tonne
Say
stacking
1.2.11 Stone for lead less Stainless
blocks,G.I.,C.I. than 0.5 Km : pipes below 100 mm dia and other heavy
Steel
material
Cost for 46 tonne
1.2.C Rate for Manual carriage for first 50 m 5934.00 trip
1.2.D Rate for Manual carriage for additional 50 m 870.75 trip
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 46 tonne
Rate for 1 tonne
Say
1.2.12 Cement
Cost for 57.99 tonne
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 57.99 tonne
Rate for 1 tonne
Say
1.2.13 Steel
Cost for 27 tonne
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 27 tonne
Rate for 1 tonne
Say
1.2.14 Timber
Cost for 42 Cum
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 42 Cum
Rate for 1 Cum
Say
stacking
1.2.15 Tar, for lead
bitumen etc. less than 0.5 Km :
Cost for 46 tonne
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 46 tonne
Rate for 1 tonne
Say
1.2.16.1 1.2 Carriage of materials by manual labour including loading, unloading and
stacking
1.2.16 S.W. Pipefor lead less than 0.5 Km :
1.2.16.1 100 mm dia
Cost for 2298 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 2298 m
Rate for 100 m
Say
stacking
1.2.16.2 150 mm dia
Cost for 1398 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1398 m
Rate for 100 m
Say
1.2.16 S.W. Pipe
1.2.16.3 200 mm dia
Cost for 999 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 999 m
Rate for 100 m
Say
stacking
1.2.16.5 250 mm dia
Cost for 600 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 600 m
Rate for 100 m
Say
stacking
1.2.16.6 300 mm dia
Cost for 420 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 420 m
Rate for 100 m
Say
stacking
1.2.16.7 350 mm dia
Cost for 300 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 300 m
Rate for 100 m
Say
stacking
1.2.16.8 400 mm dia
Cost for 240 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 240 m
Rate for 100 m
Say
stacking
1.2.16.9 450 mm dia
Cost for 198 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 198 m
Rate for 100 m
Say
stacking
1.2.16.10 500 mm dia
Cost for 162 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 162 m
Rate for 100 m
Say
stacking
1.2.16.11 600 mm dia
Cost for 132 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 132 m
Rate for 100 m
Say
stacking
1.2.17 R.C.C. for lead
pipes, less
steel than 0.5
cylinder, R.C.Kmpipes,
: C.I. pipes, and unreinforced cement pipes
1.2.17.1 100 mm dia
Cost for 1702 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1702 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.2 125 mm dia
Cost for 1391 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1391 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.3 150 mm dia
Cost for 1208 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1208 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.4 200 mm dia
Cost for 805 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 805 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.5 250 mm dia
Cost for 458 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 458 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.6 300 mm dia
Cost for 366 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 366 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.7 350 mm dia
Cost for 256 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 256 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.8 400 mm dia
Cost for 220 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 220 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.9 450 mm & 500 mm dia
Cost for 165 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 165 m
Rate for 100 m
Say
stacking
pipes, less
steel than 0.5
1.2.17.10 600, 700, 750 & 800 mm dia
Cost for 150 m
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 150 m
Rate for 100 m
Say
1.3 1.3 Loading in or unloading cement from the railway wagons at siding and carrying
the same from or into godowns adjacent to the siding,
Code Description Rate including
Unit stacking the
Details of 23 tonnes of cement
LABOUR
9999 Sundries Add for sweeping the wagon, 2.12 L.S.
screening the swept cement and filling the
same in bags
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 23 tonne
Cost of 1 tonne
Say
1.4.1 1.4 Loading in or unloading from the railway wagons as per direction of Engineer-in-
charge :
1.4.1 Steel
Details of 44 tonnes of steel
LABOUR
0114 Beldar 645.00 Day
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 44 tonne
Cost of 1 tonne
Say
charge
1.4.2 G.I., C.I.,: R.C.C. or C.C. pipes upto 500 mm dia and similar heavy materials
Details of costof unloading wagon of 14
tonnes
LABOUR
9999 Sundries 2.12 L.S.
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 14 tonne
Cost of 1 tonne
Say
1.4.3 charge :
Heavy materials where each piece or bundle, crate or case weighs more than one
tonne and
Code Description R.C.C., C.I. and concrete pipes above 500 mm dia.
Rate Unit
Details of costof unloading wagon of 14
tonnes
LABOUR
9999 Extra for fixing crane including labour 2.12 L.S.
involved
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 14 tonne
Cost of 1 tonne
Say
2.1.1 2.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5
m in
2.1.1 All widthofas
kinds well as 10 sqm on plan including getting out and disposal of
soil
Details of cost for 100 Sqm
LABOUR
0115 Coolie 645.00 Day
TOTAL
Add 1 % for water charges
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
2.2.1 2.2 Earth work in rough excavation, banking excavated earth in layers not exceeding
20cm
2.2.1 All in depth,
kinds of soilbreaking clods, watering, rolling each layer with ½ tonne roller or
Details of cost for 10 cum.
LABOUR
0101 Bhisti 714.00 Day
0113 Chowkidar 645.00 Day
Roller charges (one roller does 1850 sqm. of
consolidation per day)
0003 Hire charges of Diesel Road Roller - 8 to 10 3000.00 day

tonne

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.3.1 2.3 Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods,
watering,
2.3.1 All rolling
kinds of soil each layer with ½ tonne roller, or wooden or steel rammers, and
LABOUR
Roller charges (one roller does 1850 sqm. of
consolidation per day)
tonne
0113 Chowkidar 645.00 day

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.4 2.4 Deduct for not rolling with power roller of minimum 8 tonnes for banking
excavated earth in layers not exceeding 20 cm in depth.
LABOUR
0113 Chowkidar 645.00 day
tonne

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.5 2.5 Deduct for not watering the excavated earth for banking
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.6.1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual

means
2.6.1 All over
kinds areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on
of soil
Average output of Hydraulic Excavator per

hour = 30cum.
MACHINERY
0020 Hydraulic Excavator (3D) with driver and 7000.00 Day
fuel.
0018 Hire and running charges of loader 6000.00 Day
LABOUR
0128 Mate 714.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say

means over
2.7.1 Ordinary areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on
rock
MACHINERY
fuel.
0017 Hire and running charges of tipper 3750.00 Day
0132 Rock Excavator 645.00 Day

0133 Rock Breaker 645.00 Day
0134 Rock Hole Driller 645.00 Day
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say

means
2.7.2 Hard over
rock areas (exceeding
(requiring blasting) 30 cm in depth, 1.5 m in width as well as 10 sqm on
MACHINERY
fuel.

LABOUR
0325 Blasting powder 40.00 kilogra
m
0326 Blasting fuse (fuse wire) 15.00 each
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say

means
2.7.3 Hard over
rock areas (exceeding
(blasting prohibited)30 cm in depth, 1.5 m in width as well as 10 sqm on
MACHINERY
fuel.

0135 Stone Chiseller 714.00 Day
0103 Blacksmith 2nd class 714.00 Day
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.8.1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual
means
2.8.1 All in of
kinds foundation
soil. trenches or drains (not exceeding 1.5 m in width or 10 sqm
MACHINERY
fuel.
0018 Hire and running charges of loader 6000.00 Day
LABOUR
0128 Mate 714.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.9.1 2.9 Excavation work by mechanical means (Hydraulic excavator)/ manual means in
foundation
2.9.1 Ordinary trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),
rock
MACHINERY
fuel.
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
foundation
2.9.2 Hard trenches or
rock (requiring drains (not exceeding 1.5m in width or 10 sqm on plan),
blasting)
MACHINERY
fuel.
LABOUR
0325 Blasting powder 40.00 kilogra
m
0326 Blasting fuse (fuse wire) 15.00 each
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
foundation
2.9.3 Hard trenchesprohibited)
rock (blasting or drains (not exceeding 1.5m in width or 10 sqm on plan),
MACHINERY
fuel.
LABOUR
0135 Stone Chiseller 714.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.10.1.1 2.10 Excavating trenches of required width for pipes, cables, etc including excavation
for kinds
2.10.1 All sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m,
of soil
2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia.
Details of cost for 180m length of a pipe of
an average dia. say 40mm.
Slope assumed 1 in 200.

Earth work and filling-
Minimum depth of trench 60cm.
Average depth = (0.6+1.5)/2 = 1.05
Width for this depth 0.45 cm
180x0.45x1.05 = 85.05 cum
2.8.1 Rate as per item no. 2.8.1 of SH: Earth work 286.85 cum
2.25 Rate as per Item Number 2.25 of SH: Earth 253.95 cum
Work
TOTAL
Cost of 180m length of pipes
Cost for 1m. length of pipe
Say
for kinds
of soil
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
an average dia. say 200mm

Minimum depth of trench = 0.75+0.20 =
0.95m
Average depth = (1.50+0.95)/2 = 1.225M
Width = 0.40 + 0.20 = 0.60 m
110x0.60x1.225 = 80.85 cum
5% for collars = 4.04 cum
Total = 84.89 cum

Work
TOTAL
Cost of 110m length of pipe
Cost for 1m length of pipe

Say
for kinds
of soil
2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm
Details of cost for 60m length of a pipe of an
average dia. say 450mm.

Minimum depth of trench 0.75+0.45= 1.20m
Average depth = (1.50+1.20)/2 = 1.35
Width = 0.40 + 0.45 = 0.85 m
60x0.85x1.35 = 68.85 cum
5% for collars = 3.44 cum
Total = 72.29 cum

Work
TOTAL
Cost of 60m length of pipe

Say
2.11 2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is over
Code Description Ratecorresponding
Unit basic item
Details of cost for 300m length of pipe of an
average dia. say 200mm (rate in percentage)

100x0.60x1.75 = 105.00 cum
200x0.60x2.00 = 240.00 cum.
Total = 345.00 cum.

Collars 5%= 17.25 cum.
Total = 362.25 cum.
Work
1/2x200x1.60x1 = 160 cum
2.6.1 Rate as per Item Number 2.6.1 of SH: Earth 205.45 cum
Work
Work
Extra for additional lift
1/2x200x0.60x1.50 = 135.00 cum
Collars 5%=6.75 cum.

Total= 141.75 cum
Work
Cost for 300 m. length of pipe
2.10.1.2 Rate as per Item Number 2.10.1.2 of 390.90 metre

SH:Earth Work
(Cost for 300 m. length of pipe upto 1.5 m

depth)
Extra cost for 300 metre = Z = X - Y
Extra cost for one metre = Z/300
Percentage increase over item no 2.10.1.2

=(Zx100)/Y
Say
2.12 2.12 Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth
exceeding 3 m in depth, but not exceeding 4.5 m. (Rate
Code Description Rate is overUnitcorresponding
Details of cost for a 100m length of a pipe of
an average dia. say 200mm

1x100x0.60x2 = 120 cum
Collars 5% = 6 cum.
Total = 126 cum.
2.25 Rate as per item No.2.25 of SH: Earth work 253.95 cum
Earth work
100x1.60x1.25 = 200 cum

1x100x0.60x1.50 = 90 cum.
2x0.50x100x0.60x0.50 = 30 cum.
Total = 120 cum.

Collars 5% = 6 cum.
Total = 126 cum
2.26.1 Rate as per item no. 2.26.1 of SH: Earth 104.50 cum
work
2.10.1.2 Rate as per Item Number 2.10.1.2 of SH: 390.90 Metre

Earth work
(Cost for 100 m. length of pipe upto 1.5 m

depth)
Extra cost for 100 metre = Z = X-Y
Extra cost for one metre = Z/100
Percentage increase over item no 2.10.1.2

=(Zx100)/Y
Say
2.13.1.1 2.13 Excavating trenches of required width for pipes, cables, etc, including
excavation
2.13.1 Ordinary for :sockets, depth upto 1.5 m, including getting out the excavated
rock
2.13.1.1 Pipes, cables etc. not exceeding 80 mm dia
Details of cost for 180 m length of a pipe of a
Slope assumed 1:200

Excavation-
Quantity same as in item No.2.10.1.1
Work
Refilling, ramming and watering
2.25 Rate as per item No.2.25 of SH: Earth Work 253.95 cum
Extra labour for ramming of rock

TOTAL
Add 1 % for water charges on all except (A)
i.e. on (64494.91 - 63204.91) = 1290
TOTAL
0.1405) on all except (A) i.e. on (64507.81 -
63204.91) = 1302.9 x 0.1405
TOTAL
overheads on all except (A) i.e. on
(64690.87 - 63204.91) = 1485.96
TOTAL
Add 1 % for Labour Cess on all except (A)
i.e. on (64913.76 - 63204.91) = 1708.85
Say
excavation
rock
2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
Details of cost for 80 m length of pipe of an
average dia. Say 200mm.
Slope assumed 1:200

Excavation-
Minimum depth of trench.
0.75+0.15+0.20 = 1.10m
Average depth = (1.10+1.50)/2 = 1.30m
Minimum width of trench = 0.90m
80x0.90x1.30 = 93.60 cum.
2.9.1 Rate as per item no. 2.9.1 of SH: Earth Work 523.50 cum

TOTAL
i.e. on (70977.84 - 69558.84) = 1419
TOTAL
69558.84) = 1433.19 x 0.1405
TOTAL
(71193.39 - 69558.84) = 1634.55
TOTAL
i.e. on (71438.57 - 69558.84) = 1879.73
Say
excavation
rock
2.13.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia
Details of cost for 30 m. length of a pipe of
an average dia. say 450mm.

Excavation-
Minimum depth of trench.
0.75+0.15+0.45 = 1.35m
Average depth = (1.35+1.50)/2 = 1.425m
Minimum width of trench = 0.90m
30x0.90x1.425 = 38.475 cum.
5% for collar = 1.924cum

Total = 40.399cum

TOTAL
i.e. on (30628.82 - 30022.52) =
606.299999999999
TOTAL
30022.52) = 612.359999999999 x 0.1405
TOTAL
(30720.92 - 30022.52) = 698.400000000001
TOTAL
i.e. on (30825.68 - 30022.52) = 803.16
Cost for 30 m length of a pipe
Cost for one m length of a pipe
Say
excavation
2.13.2 Hard for sockets,
rock (requiring depth upto 1.5 m, including getting out the excavated
blasting)
Slope assumed 1:200

Excavation-

TOTAL
i.e. on (92267.29 - 90654.79) = 1612.5
TOTAL
90654.79) = 1628.63 x 0.1405
TOTAL
(92512.24 - 90654.79) = 1857.45000000001
TOTAL
i.e. on (92790.86 - 90654.79) =
2136.07000000001
Say
excavation
blasting)
Details of cost for 80 m length of a pipe of an
Slope assumed 1:200

Excavation-


TOTAL
i.e. on (101541.99 - 99768.24) = 1773.75
TOTAL
99768.24) = 1791.49 x 0.1405
TOTAL
(101811.43 - 99768.24) = 2043.19
TOTAL
i.e. on (102117.91 - 99768.24) = 2349.67
Say
excavation
blasting)
Slope assumed 1:200

Excavation-

TOTAL
i.e. on (43815.94 - 43061.29) =
754.650000000001
TOTAL
43061.29) = 762.200000000001 x 0.1405
TOTAL
(43930.58 - 43061.29) = 869.290000000001
TOTAL
i.e. on (44060.97 - 43061.29) = 999.68
Say
excavation
rock (blasting depth upto 1.5 m, including getting out the excavated
prohibited)
Slope assumed 1:200

Excavation-
2.9.3 Rate of item no 2.9.3 of SH: Earth Work 1258.60 cum

TOTAL
i.e. on (127337.66 - 125725.16) = 1612.5
TOTAL
125725.16) = 1628.63 x 0.1405
TOTAL
(127582.61 - 125725.16) =
1857.45000000001
TOTAL
i.e. on (127861.23 - 125725.16) =
2136.07000000001

Say
excavation
prohibited)
Slope assumed 1:200

Excavation-

TOTAL
i.e. on (140137.95 - 138364.2) = 1773.75
TOTAL
138364.2) = 1791.49 x 0.1405
TOTAL
(140407.39 - 138364.2) = 2043.19
TOTAL
i.e. on (140713.87 - 138364.2) =
2349.67000000001
Say
excavation
prohibited)
Slope assumed 1:200

Excavation-

TOTAL
i.e. on (60474.47 - 59719.82) =
754.650000000001
TOTAL
59719.82) = 762.200000000001 x 0.1405
TOTAL
(60589.11 - 59719.82) = 869.290000000001
TOTAL
i.e. on (60719.5 - 59719.82) = 999.68
Say
2.14 2.14 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock
exceeding 1.5 m in depth but not exceeding 3 m. (Rate
Code Description Rate is over
Unitcorresponding
an average dia. say 200mm. Slope assumed
1 in 200.
Excavation-
100x0.90x1.50 = 157.50 cum.
200x0.90x20.00 = 360 cum.
Total = 517.50 cum.

0.50x200x1.90x1 = 190 cum.
517.50+190.00 = 707.50 cum.

0.5x300x0.9x1.5 = 202.50 cum.
Work

TOTAL
i.e. on (771961.01 - 761318.51) = 10642.5
TOTAL
761318.51) = 10748.93 x 0.1405
TOTAL
(773577.66 - 761318.51) = 12259.15
TOTAL
i.e. on (775416.53 - 761318.51) = 14098.02
2.13.2.2 Rate as per Item No.2.13.2.2 of SH: Earth 1276.75 Metre

Work
(cost of 300 m length of pipe upto 1.5m

depth)
Extra cost for 300 m = X - Y
Extra cost for one m

Percentage increase over item 2.13.2.2 =
(Zx100)/Y
Say
2.15 2.15 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock
exceeding 3m in depth but not exceeding 4.5 m. (Rate
Code Description Rate is over
Unit
an average dia. say 200mm. (rate in
percentage) Slope assumed 1 in 200.
Max depth assumed 3.5m

Excavation-
100x0.90x2 = 180 cum.
100x1.90x1.25 = 237.5

1x100x0.90x1.50 = 135
2x0.50x100x0.90x0.50 = 45
Total = 180 cum.

Work
180+237.50 = 417.50 cum.

TOTAL = 199,217.75
i.e. on (448118.76 - 442152.51) = 5966.25
TOTAL
442152.51) = 6025.91 x 0.1405
TOTAL
(449025.06 - 442152.51) =
6872.54999999999
TOTAL
i.e. on (450055.94 - 442152.51) =
7903.42999999999
2.13.2.2 Rate as per item No 2.13.2.2 of SH: Earth 1276.75 Metre

Work
(cost of 100 m length of pipe exceeding 1.5

m and upto 3 m depth)
Extra cost for 100 m = X - Y
Extra cost for 1 m

Percentage increase over item 2.13.2.2 =
(Zx100)Y
Say
2.16.1 2.16 Close timbering in trenches including strutting, shoring and packing cavities
(wherever
2.16.1 Depth required) complete.
not exceeding 1.5 m (Measurements to be taken of the face area
Details of cost for a trench 30m long and
1.5m deep area 2x30x1.50=90 sqm-
MATERIAL
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Poling boards of
1198 Second class kail wood in planks 260.00 10 cudm
90x0.038 = 3.42 cum = 3420 cudm

Qty taken for cost of using once after
deducting for credit = 3420x¼x¼ = 213.75
dm³
Wallings l00mmx 100mm of
1197 Second class kail wood in scantling 260.00 10 cudm
4x30x0.10x0.10 = 1.20cum= 1200 cudm

deducting for credit = 1200x¼x¼ = 75 dm³
0302 Safeda ballies 125 mm diameter 40.00 metre
and 1.5m long

2x17x1.50 = 51m
deducting for credit = 51x¼x¼ = 3.1875 m
CARRIAGE
Poling boards = 3.42 cum
Walling = 1.20 cum.
Balli struts: 3.14/4x(0.125)³x51 = 0.63 cum
Total of carriage = 5.25x¼ = 1.3125 cum.
2204 Carriage of Timber 187.35 cum

0112 Carpenter 2nd class 714.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 90 Sqm.
Cost per sqm.
Say
(wherever
2.16.2 Depth required)
exceeding 1.5complete.
m but not (Measurements
exceeding 3 m to be taken of the face area
1.5m deep
Area 2x30x1.50=90 sqm

MATERIAL
given @ 75% of cost
Poling boards of
90x0.038 = 3.42 cum = 3420 cudm

dm³
Walings 100 mmx 100mm of
4x30x0.10x0.10 = 1.20cum = 1200 cudm

and 1.5m long

2x17x1.50 = 51m
CARRIAGE
Walling= 1.20 cum.

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 90 Sqm.
Cost per sqm.
Say
(wherever
exceeding 3 mcomplete. (Measurements
but not exceeding 4.5 m to be taken of the face area
1.5m deep
Area 2x30x1.5=90 sqm-

MATERIAL
given @ 75% of cost
Poling boards of
90x0.038 = 3.42 cum = 3420 cudm

dm³
Wallings 100mmx 100mm of
4x30x0.10x0.10 = I.20cum = 1200 dm3

and 1.5m long

2x17x1.5 = 51m
CARRIAGE
Walling = 1.20 cum.

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 90 Sqm.
Cost per sqm.
Say
2.17.1 2.17 Close timbering in case of shafts, wells, cesspits, manholes and the like
including
2.17.1 Depth not strutting,
exceeding shoring
1.5 m and packing cavities (wherever required) etc.
Details of cost for a manhole 1.2m x 1.0m
x1.5m- Surface area: 2x(1.2+1.0)x1.5 =
6.6sqm
MATERIAL
given @ 75% of cost
Poling boards of
6.60x0.038 = 0.251 cum = 251 cudm

dm³
Wallings 100mmx 100mm of
2x2x1.124x0.1x0.1 = 0.045 cum

2x2x0.924x0.1x0.1 = 0.037 cum.
Total Kail wood = 0.082 cum. = 82dm³

deducting for credit = 82x¼x¼ = 5.125 dm³
and 1.50m long

2x2x0.924 = 3.696
2x2x0.724 = 2.896
Total of balli = 6.592m
deducting for credit = 6.592x¼x¼ = 0.4118m

CARRIAGE
Walling = 0.082 cum.
Balli struts 3.14/4x(0.125)²x6.59 = 0.081

cum.
Total of carriage = 0.414 cum x¼ = 0.1035

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
including
2.17.2 Depth strutting,
exceeding 1.5shoring andexceeding
m but not packing cavities
3m (wherever required) etc.
6.6sqm
MATERIAL
given @ 75% of cost
Poling boards of
6.6x0.038 = 0.251 cum = 251 cudm

dm³
Walling of
2x2x1.124x0.1x0.1 = 0.045 cum
2x2x0.924x0.1x0.1 = 0.037 cum.

and 1.5m long

2x2x0.924 = 3.696
2x2x0.724 = 2.896
deducting for credit = 6.592x¼x¼ = 0.4118
m

CARRIAGE
Balli struts 3.14/4x(0.125)²x6.59 = 0.081

cum.

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
including
2.17.3 Depth strutting,
exceeding 3m shoring
but notand packing4.5
exceeding cavities
m (wherever required) etc.
6.6sqm
MATERIAL
given @ 75% of cost
Poling boards of
6.6x0.038 = 0.251 cum = 251 cudm

dm³
Walling of
2x2x1.124x0.10x0.10 = 0.045 cum
2x2x0.924x0.10x0.10 = 0.037 cum.

and 1.50m long

2x2x0.924 = 3.696
2x2x0.724 = 2.896
deducting for credit = 6.592x¼x¼ = 0.4118
m

CARRIAGE

Balli struts 3.14/4x(0.125)²x6.59 = 0.081
cum.

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
2.18.1 2.18 Close timbering over areas including strutting, shoring and packing cavities
(wherever
2.18.1 Depth required) etc.
not exceeding 1.5 complete.
m (Measurements to be taken of the face area
Details of cost for an area 30m long and
1.50m deep-Area -30x1.5m = 45 sqm.
MATERIAL
given @ 75% of cost
Poling boards of
250x38mm : 45x0.038 = 1.71 cum = 1710

cudm
dm³
Wallings l00mmx 100mm of
100x100mm : 30x0.10x0.10 = 0.30cum =

300 cudm

Raking struts

deducting for credit = 25.5x¼x¼ = 1.59 m

CARRIAGE
Walling = 0.30 cum
Raking struts 3.14/4x(0.125)² = 0.313 cum

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 45 Sqm.
Cost per sqm.
Say
(wherever
exceeding 1.5etc. complete.
m but (Measurements
not exceeding 3m to be taken of the face area
MATERIAL
given @ 75% of cost
Poling boards of
250x38mm : 45x0.038 = 1.71 cum =1710

cudm

dm³
Walling of
100x100mm : 30x0.10x0.10 = 0.30cum =

300
cudm

Raking struts
17 x 1.5 = 25.5m

CARRIAGE
Walling = 0.30 cum.

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 45 Sqm.
Cost per sqm.
Say
(wherever
exceeding 3 metc.
butcomplete. (Measurements
not exceeding 4.5 m to be taken of the face area
MATERIAL
given @ 75% of cost
Poling boards of
250x38mm : 45x0.038 = 1.71 cum = 1710

cudm

dm³
Walling of
100x100mm : 30x0.10x0.10 = 0.30cum =

300
cudm

Raking struts
and 1.5m long

17 x 1.50 = 25.5m

CARRIAGE
Walling = 0.30 cum.

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 45 Sqm.
Cost per sqm.
Say
2.19 2.19 Extra for planking, strutting and packing materials for cavities (in close
timbering) if required to be left permanently in position.
Code Description Rate (FaceUnitarea of timber
1.5m deep area 2x30x1.5=90 sqm-
MATERIAL
Poling boards of
90x0.038 = 3.42 cum = 3420 cudm
Less @ 1/8 of Qty as timber is supposed to

be used once before = 3420 - 427.5 =
2992.5 dm ³
Walings 100mmx100mm of
4x30x0.10x0.10 = 1.20cum = 1200 cudm

be used once before = 1200 - 150 = 1050
dm ³
Struts of
and 1.5m long

2x17x1.5 = 51m
be used once before = 51 - 6.37 = 44.63 m

Walling= 1.20 cum.
Balli struts: 3.14/4x(0.125) ² x 51 = 0.63 cum
= 5.25 cum Taking half = 5.25 x ½ = 2.675

cum
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 90 Sqm.
Cost per sqm.
Say
2.20.1 2.20 Open timbering in trenches including strutting and shoring complete
(measurements
2.20.1 Depth to be 1.5
not exceeding taken
m of the face area timbered):
Details of cost for a trench of length 30m and
1.50m deep surface area - 2x30x1.5 = 90
sqm.
MATERIAL
given @ 75% of cost
Poling board of
1.5mx0.25x0.038m
2x40x1.5x0.25x0.038= 1.14cum = 1140
cudm
cudm
Walling l00mmxl00mm : 4x30mx0.l0mx0.l0m

= 1.20cum= 1200 cudm

Struts of
and 1.5m long

2x17x1.50 = 51m

CARRIAGE:
Walling = 1.20 cum
Ballies struts 3.14/4x(0.125) ² = 0.63 cum
Total of carriage = 2.97 cum x ¼ = 0.74
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 90 Sqm
Cost per sqm.
Say
(measurements
2.20.2 Depth exceedingto1.5 bemtaken of the
but not face area
exceeding 3mtimbered):
sqm.
MATERIAL
given @ 75% of cost
Poling boards of
1.50mx0.25x0.038m 2x40x1.50x0.25x0.038=
1.14cum= 1140 cudm

dm³
Wallings of
100mmx 100mm: 4x30mx0.l0mx0.l0m
= 1.20cum= 1200 cudm

Struts of
and 1.5m long

2x17x1.5 = 51m

CARRIAGE:
Walling = 1.20 cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 90 Sqm
Cost per sqm.
Say
(measurements
2.20.3 Depth exceedingto3 be taken
m but notofexceeding
the face area timbered):
4.5 m
sqm.
MATERIAL
given @ 75% of cost
Poling boards of
1.50mx0.25x0.038m :
2x40x1.5x0.25x0.038= 1.14 cum = 1140
cudm
dm³
Wallings of
l00mmxl00mm : 4x30mx0.lmx0.lm
= 1.20cum= 1200 cudm

Struts of
and 1.5m long

2x17x1.5 = 51m

CARRIAGE:
Walling = 1.20 cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 90 Sqm
Cost per sqm.
Say
2.21.1 2.21 Open timbering in case of shafts, wells, cesspits, manholes and the like
including
2.21.1 Depth not strutting
exceeding and
1.5shoring
m complete (Measurements to be taken of the face
Details of cost for a manhole 1.2x 1m x 1.5m
- Surface area 2(1.2+1.0)x1.5 = 6.6 sqm
MATERIAL
given @ 75% of cost
Polling boards of
250mm wide and 38mm thick
6x0.25xl.5x0.038 = 0.086 cum = 86cudm

Walling l00mmxl00mm of
4x1.2x0.1x0.1 = 0.048 cum = 48 dm³

Struts of
(4x1.0=4.0)+(2x1.2=2.4) = 6.4m


CARRIAGE :
Walling = 0.048 cum

Ballies struts 3.14/4x(0.125) ² x 6.4 = 0.079
cum

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
including
2.21.2 Depth strutting1.5
exceeding and
m shoring complete (Measurements
but not exceeding 3m to be taken of the face
MATERIAL
given @ 75% of cost
Polling boards of
250mm wide and 38mm thick :

6x0.25x1.50x0.038 = 0.086 cum = 86cudm

Walling 100mmxl00mm of
4x1.20x0.10x0.10 = 0.048 cum = 48 dm³

Struts of
(4x1.00=4.00)+(2x1.20=2.40) = 6.40m


CARRIAGE :
Walling = 0.048 cum

cum

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
including strutting and shoring complete (Measurements to be taken of the face
2.21.3 Depth exceeding 3 m but not exceeding 4.5 m
MATERIAL
given @ 75% of cost
Polling boards of
250mm wide and 38mm thick :

6x0.25x1.50x0.038 = 0.086 cum = 86cudm

Walling 100mmxl00mm of
4x1.2x0.10x0.10 = 0.048 cum = 48 dm³

Struts of
(4x1.0=4.0)+(2x1.2=2.4) = 6.4m


CARRIAGE :
Walling = 0.048 cum

cum

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 6.6 sqm.
Cost per sqm.
Say
2.22.1 2.22 Open timbering over areas including strutting, shoring etc. complete.
(Measurements
2.22.1 Depth to be 1.5
not exceeding taken
m of the face area timbered):
1.5m deep area = 30 x 1.5 = 45 sqm.
MATERIAL
given @ 75% of cost
Polling boards of
250mm x 38mm
40x1.50x0.25x0.038 = 0.57cum. = 570 dm³

dm³
Raking struts-
40x1.50 = 60m

CARRIAGE :
Ballies 40x1.5x3.14/4x0.125² = 0.4 cum.
Total for carriage = 1.31 cum x ¼ = 0.3275

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 45 sqm.
Cost per sqm.
Say
(Measurements to be taken of the face area timbered):
2.22.2 Depth exceeding 1.5 m but not exceeding 3 m
1.5m deep area = 30 x 1.5 = 45 sqm.
MATERIAL
given @ 75% of cost
Polling boards of
250mm x 38mm
40x1.50x0.25x0.038 = 0.57cum. = 570 dm³

dm³
Raking struts-
40x1.50 = 60m

CARRIAGE :
Ballies 40x1.50x3.14/4x0.125² = 0.4 cum.

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 45 sqm.
Cost per sqm.
Say
(Measurements
2.22.3 Depth exceedingto3be taken
m but notofexceeding
the face area timbered):
4.5 m
1.5m deep area = 30 x 1.50 = 45 sqm.
MATERIAL
given @ 75% of cost
Polling boards of
250mm x 38mm
40x1.50x0.25x0.038 = 0.57cum. = 570 dm³

dm³
Raking struts-
40x1.50 = 60m
CARRIAGE :
Ballies 40x1.5x3.14/4x0.125² = 0.4 cum.

cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 45 sqm.
Cost per sqm.
Say
2.23 2.23 Extra for planking and strutting in open timbering if required to be left
permanently in position. (Face area of the timber permanently
Code Description Rate Unitleft to be
sqm.
MATERIAL
Poling boards of
1.50mx0.25x0.038
2x40x1.50x0.25x0.038 = 1.14cum = 1140
cudm
be used once before = 1140 - 142.5 = 997.5
dm ³
Walling 100mmx 100mm of
4x30mx0.10 mx0.10 m = 1.20cum= 1200

cudm
be used once before = 1200 - 150 = 1050
dm ³
Struts of
and 1.5m long

2x17x1.5= 51m
be used once before = 51 - 6.37 = 44.63 m

Walling = 1.20 cum
Ballies struts 51x3.14x¼x0.125² = 0.63 cum
Total of carriage = 2.97 cum Taking half =

2.97 x ½ = 1.485 cum
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 90 sqm.
Cost per sqm.
Say
2.25 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20cm in depth,
Code Description Rate consolidating
Unit each
LABOUR
0128 Mate 714.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.26 2.25A Excavating, supplying and filling of local earth (including royalty) by mechanical
transport upto a lead of 5km also including ramming
Code Description and watering
Rate Unit of the earth in
Details of cost for 10 cum
2.6.1 Rate as per Item No.2.6.1 of SH:2 EARTH 205.45 cum
WORK
Less for initial lead of 50m
1.2.2 Rate as per item no.1.2.2 of SH:1 234.05 cum

CARRIAGE OF MATERIALS
Add for ramming and watering in layers (Ref.

item no. 2.27)
0114 Beldar (1/2 x 0.89 = 0.45 day) 645.00 day

0101 Bhisti 714.00 day
Carriage of materials up to 5 km
1.1.2 Rate as per item no.1.1.2 of SH:1 276.70 cum

CARRIAGE OF MATERIALS
0979 Royalty for good earth 40.00 cum

TOTAL
i.e. on (3421.15 - 2481) = 940.15
TOTAL
2481) = 949.55 x 0.1405
TOTAL
overheads on all except (A) i.e. on (3563.96
- 2481) = 1082.96
TOTAL
i.e. on (3726.4 - 2481) = 1245.4
Cost of 10 Cum.
Cost of 1 Cum.
Say
2.27.1 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking
excavated
2.26.1 All kinds oforsoil
stacked materials.
Details of cost of 10 cum.
LABOUR
0128 Mate 714.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.27.2 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking
excavatedororhard
2.26.2 Ordinary stacked
rock materials.
Details of cost of 10 cum.
LABOUR
0128 Mate 714.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.28 2.27 Supplying and filling in plinth with sand under floors, including watering,
ramming, consolidating and dressing complete. Rate
Code Description Unit
MATERIAL
6501 Sand zone V (Jamuna) 1300.00 cum
2335 Carriage of sand 163.93 cum
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.29.1 2.28 Surface dressing of the ground including removing vegetation and in-equalities
notkinds
2.28.1 All exceeding
of soil15 cm deep and disposal of rubbish, lead up to 50 m and lift up to
Details of cost for 100 sqm.
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
2.30.1 2.29 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the
same.
2.29.1 All kinds of soil
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
2.31.1 2.30 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the
excavated
2.30.1 All kinds ofsoil,
soilthen returning the soil as required in layers not exceeding 20cm
Details of cost for 10 holes-
Earth work 10 x 0.30 (avg) = 3.0 cum
Extra labour for filling and ramming

TOTAL
i.e. on (889.21 - 860.55) = 28.66
TOTAL
860.55) = 28.95 x 0.1405
TOTAL
overheads on all except (A) i.e. on (893.57 -
860.55) = 33.02
TOTAL
i.e. on (898.52 - 860.55) = 37.97
Cost of 10 holes
Cost of 1 hole
Say
excavatedrock
2.30.2 Ordinary soil, then returning the soil as required in layers not exceeding 20cm
Work

TOTAL
i.e. on (1599.16 - 1570.5) =
28.6600000000001
TOTAL
1570.5) = 28.9500000000001 x 0.1405
TOTAL
- 1570.5) = 33.02
TOTAL
i.e. on (1608.47 - 1570.5) = 37.97
Cost of 10 holes
Cost of 1 hole
Say
excavated
2.30.3 Hard soil, then returning
rock (requiring blasting) the soil as required in layers not exceeding 20cm
Work

TOTAL
i.e. on (2567.41 - 2538.75) =
28.6599999999999
TOTAL
2538.75) = 28.9499999999999 x 0.1405
TOTAL
- 2538.75) = 33.02
TOTAL
i.e. on (2576.72 - 2538.75) =
37.9699999999998
Cost of 10 holes
Cost of 1 hole
Say
excavated
2.30.4 Hard soil, thenprohibited)
rock (blasting returning the soil as required in layers not exceeding 20cm
Work

TOTAL
i.e. on (3804.46 - 3775.8) =
28.6599999999999
TOTAL
3775.8) = 28.9499999999999 x 0.1405
TOTAL
- 3775.8) = 33.02
TOTAL
i.e. on (3813.77 - 3775.8) =
37.9699999999998
Cost of 10 holes
Cost of 1 hole
Say
2.32 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees
and saplings of girth up to 30 cm measured at a height
Code Description Rate of 1 Unit
m above ground leve
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
2.33 2.32 Clearing grass and removal of the rubbish up to a distance of 50 m outside the
periphery of the area cleared.
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
2.34.1 2.33 Felling trees of the girth (measured at a height of 1 m above ground level),
including30cutting
2.33.1 Beyond cm girthof trunks and
upto and branches,
including 60 removing
cm girth the roots and stacking of
Details of cost for one tree of 15cm dia and
average height 3m
LABOUR
quantity of wood-
3.14/4x0.15x0.15x3 = 0.053 cum.
Add 20% for branches = 0.011 cum.
Total = 0.064 cum.

Labour for cutting in trees removing the
roots from the soil and then filling in Pit and
depresions.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one tree
Say
including60cutting
2.33.2 Beyond cm girthof trunks
upto andand branches,
including removing
120 cm girth the roots and stacking of
Details of cost for a tree of average girth
90cm, average dia. 0.3m and length 5m
LABOUR
quantity of wood-
(22x0.30x0.30x5)/7x4 = 0.35 cum
20% branches = 0.07 cum
Total = 0.42 cum

Labour for cutting trees, removing roots from
the soil and filling in pit & depressions:

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one tree
Say
including120
2.33.3 Beyond cutting of trunks
cm girth andincluding
upto and branches,240
removing the roots and stacking of
cm girth
180cm, average dia. 0.6m and length 7m
LABOUR
quantity of wood-
(22x06x0.60x7)/7x4 = 1.98 cum.+
20% branches = 0.40 cum.
Total = 2.38 cum.


TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one tree
Say
including
2.33.4 Above 240cutting of trunks and branches, removing the roots and stacking of
cm girth
300cm, average dia. 1m and length 10m
LABOUR
quantity of wood-
(22 x 1 x 1 x 10)/7x4 = 7.86 cum
20% Branches = 1.57 cum.
Total = 9.43 cum.


TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one tree
Say
2.35.1 2.34 Supplying chemical emulsion in sealed containers including delivery as

specified.
2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
Details of cost of 100 litres
7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. 150.00 litre
2342 Carriage of solvent/ Diesel. 16.39 quintal
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 100 litres
Cost for 1 litre
Say
2.36.1.1 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-
termiteexternal
2.35.1 Along treatment (excluding
wall where thethe costisofnot
apron chemical emulsion)
provided :
using chemical emulsion @
7.5 litres / sqm of the vertical surface of the substructure
2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration to a depth of 300mm
Details of cost for 10 metres
MATERIAL
Chlorpyriphos 1% concentration =
10.0x0.30x7.5 = 22.5 litres
Chlorpyriphos 20% required = 22.5/20

=1.125 litres
Chlorpyriphos 20% E.C. / Lindane 20% E.C.

1.125 litres (to be supplied free of cost)
LABOUR
(for excavating channel) rodding in chemical
spraying the emulssion and refilling the
same
9999 Sundries, rent of sprayer etc. 2.12 L.S.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
termitethe
2.35.2 Along treatment
external(excluding
wall belowthe cost ofor
concrete chemical
masonry emulsion) : chemical
apron using
2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentrationplugging holes etc.:
emulsion @ 2.25 litres per linear metre including drilling and
MATERIAL
Chlorpyriphos 1% concentration = 10x2.25 =
22.5 litres
Chlorpyriphos 20% required = 22.50/20 =

1.125 litres

LABOUR
(for drilling holes and injecting chemical)
9999 Sundries and rent of a sprayer and mortar 2.12 L.S.
and making good the holes
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
2.35.3 termite treatment
Treatment (excluding
of soil under the floors
existing cost ofusing
chemical emulsion)
chemical :
emulsion @ one litre per
hole, Chlorpyriphos/Lindane
2.35.3.1 With 300 mm apart includingE.C. drilling
20%12 mm1%
with diameter holes and plugging with
concentration
Details of cost for 9 sqm. (3 metre x 3 metre)
No. of holes - 100 nos.

MATERIAL
Chlorpyriphos 1% required 100x1 litre = 100
litres
Chlorpyriphos 20% E.C. = 100/20 = 5.0 litres

5 litres (to be supplied free of cost)
LABOUR
(For making holes & spraying)
0124 Mason (brick layer) 2nd class 714.00 Day
9999 Sundries, rent of sprayer and mortar 2.12 L.S.

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 9 square metre
Cost per square metre
Say
termite treatment
2.35.4 Treatment (excluding
of existing masonrytheusing
cost chemical
of chemical emulsion)
emulsion : litre per hole at
@ one
300 mm
2.35.4.1 With interval including drilling
Chlorpyriphos/Lindane holes
E.C. 20% at 45
with 1%degree and plugging them with
concentration
MATERIAL
No. of holes 10.0/0.30 = 33.33+1 = 34.33
holes
Say 34 holes
chlorpyriphos 1% concentration required
= 34x1.0 = 34.00 litres

Chlorpyriphos 20% E.C. required
34.00/20 = 1.70 litres

7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. 150.00 litre
LABOUR
9999 Sundries, rent of pump etc. 2.12 L.S.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
2.36.5 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-
2.35.5 termite treatment
Treatment at points(excluding the
of contact ofcost
woodofwork
chemical emulsion)
by chemical :
emulsion
Chlorpyriphos/ Lindane (in oil or kerosene based solution)
Code Description Rate @ 0.5 litres per hole
Unit
MATERIAL
No. of holes 10.0/0.15 = 66.67+1 = 67.67
holes
Say 68 holes
Chlordane 1% concentration required
= 68 x 0.5 = 34.00 litres

Chlordane 20% E.C. required
34.00/20=1.70 litres
Chlordane 20% E.C./ Lindane 20% E.C. 1.7
litres (to be supplied free of cost)
Kerosene oil = 34-1.7 = 32.30 litres
0771 Kerosene oil 50.00 litre

LABOUR
(For making holes and plugging the same)

for injecting chemical
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 10 metres
Cost for 1 metre
Say
2.37 2.36 Extra for levelling & neatly dressing of disposed soil completely as directed by
Engineer-in-charge.
LABOUR
0128 Mate 714.00 Day
0115 Beldar/ Coolie 645.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
2.38 2.37 Supply and stacking of Fly ash conforming to IRC- 58 at site, including carriage,
loading , unloading & stacking up to any lead (measured
Code Description Rate stacks
Unit will be reduced
Ref :- Based on DAR Item No : 1.1.1 A) ii)
Labour and carriage
1980 Flyash 11.00 cum

(Available free of cost at thermal power
plant at Baderpur power plant. Lead = 35
km)
2262 Carriage of Flyash 163.93 cum

(1st Lead 0 to 5km)
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Total
Cost of 1 cum.
Say
2.39 2.38 Filling with available fly ash and earth (excluding rock) in trenches or
embankment in layers (each layer should not exceed
Code Description Rate15 cm), with intermediate
Unit
Ref :- Based on DAR Item No : 2.25
LABOUR
0128 Mate 714.00 Day
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 cum.
Cost of 1 cum.
Say
3.1 3.1 Cement mortar 1:1 (1 cement : 1 fine sand)

MATERIAL
(0.7175 cum. of cement = 1.02 tonne)
Cement required for cement mortar is
71.25%
0367 Portland Cement (OPC-43 grade) 5000.00 tonne
2209 Carriage of Cement 145.72 tonne

0983 Fine sand (zone IV) 900.00 cum
2261 Carriage of Fine sand (1 part badarpur 163.93 cum
sand : 2 parts jamuna sand)
LABOUR
For measuring, carrying, depositing and
mixing-
9999 Hire and running charges of mechanical 2.12 L.S.
mixer
Cost of 1.00 cum
Say
3.2 3.2 Cement mortar 1:2 (1 cement : 2 fine sand).

MATERIAL
(0.475 cum. of cement = 0.68 tonne) Cement
required for cement mortar is 47.50%

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say

MATERIAL

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say

MATERIAL

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say

MATERIAL

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say

MATERIAL

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say
3.7 3.7 Cement mortar 1:2 (1 cement : 2 coarse sand).

MATERIAL

0982 Coarse sand (zone III) 1500.00 cum
2203 Carriage of Coarse sand 163.93 cum
LABOUR
mixing-
mixer
Cost of 1.00 cum
Say

MATERIAL

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say

MATERIAL

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say

MATERIAL

LABOUR
mixing-
mixer
TOTAL
Say

MATERIAL

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say
3.12 3.12 Cement mortar 1:2 (1 cement : 2 stone dust).

MATERIAL

1159 Stone dust 1100.00 cum
2267 Carriage of Stone dust 163.93 cum
LABOUR
mixing-
mixer
Cost of 1.00 cum
Say
3.13 3.13 Cement mortar 1:2 (1 cement : 2 marble dust).

MATERIAL
(0.475 cum of cement = 0.68 tonne) Cement

0784 Marble dust/ powder 1130.00 cum
2268 Carriage of Marble dust and marble chips 163.93 cum
LABOUR
mixing
mixer
Cost of 1.00 cum
Say
3.14 3.14 Cement mortar 1:5 (1 cement : 5 marble dust).

MATERIAL

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say
3.15 3.15 White cement mortar 1:2 (1 white cement : 2 marble dust).
MATERIAL
(0.475 cum. of white cement = 0.68 tonne)
47.50%
0368 White Cement 11200.00 tonne

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say
MATERIAL
35.70%

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say
Detail of cost for 1 cum
MATERIAL
21.40%

LABOUR
mixing-
mixer
Cost of 1.00 cum
Say
3.18 3.18 Mud mortar

Detail of cost for one cum
MATERIAL
0811 Mud (dry) 165.00 cum
LABOUR
TOTAL
Cost of one cum
Say
3.19 3.19 Mortar in lime, surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5
MATERIAL
(0.475 cum of lime putty) = 3.01 q of
unslaked lime
1182 Surkhi 700.00 cum
0773 Unslaked lime 300.00 quintal

2268 Marble dust and/or marble chips 163.93 cum
2208 Carriage of Lime 163.93 cum

LABOUR
for slaking lime, making lime putty, grinding
and carrying

9999 As cost for running and upkeep of mortar mill 2.12 L.S.

Cost of 1.00 cum
Say
4.1.1 4.1 Providing and laying in position cement concrete of specified grade excluding
the cost(1ofCement:
4.1.2 1:1½:3 centering1½and shuttering
coarse - All work
sand (zone-III) up to plinth
derived level : sources : 3
from natural
graded stone
Code Description aggregate 20 mm nominal size derived
Ratefrom natural
Unit sources).
MATERIAL
0295 Stone Aggregate (Single size) : 20 mm 1400.00 cum
nominal size

nominal size
2202 Carriage of Stone aggregate below 40 mm 163.93 cum

nominal size

(0.2833 cum)
LABOUR
0155 Mason (average) 749.00 Day
0002 Hire charges of Concrete Mixer 0.25 to 0.40 800.00 Day
cum with hooper
0012 Vibrator (Needle type 40 mm) 350.00 Day

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
4.1.2A the cost(1ofCement:
1:1.5:3 centering1.5and shuttering
coarse - All work
sand (zone- up to plinth
III) including level :
manufactured sand
derived
Code Descriptionfrom Recycled concrete aggregate (RCA) upto
Rate 25% : 3
Unit graded stone
MATERIAL
nominal size
0272 Recycled Concrete Aggregate (RCA) 20 mm 957.00 cum

nominal size

nominal size

nominal size
2202 Carriage of Stone aggregate including 163.93 cum
Recycled Concrete Aggregate (RCA) below
40 mm nominal size
0982 Coarse sand (zone III) derived from natural 1500.00 cum
sources
0276 Manufactured sand derived from Recycled 741.00 cum

Concrete Aggregate
2203 Carriage of Coarse sand including 163.93 cum

manufactured sand
(0.2833 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost of centering and shuttering - All work up to plinth level :
4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded
stone aggregate 20 mm nominal size derived fromRate
Code Description natural sources).
Unit
MATERIAL
nominal size

nominal size

nominal size

(0.2225 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
4.1.3A the cost
1:2:4 of centering
(1 cement and shuttering
: 2 coarse - All work
sand (zone-III) up to plinth
including level :
manufactured sand
derived
Code Description from Recycled concrete aggregate (RCA) upto
Rate 25% : 4
Unit graded stone
MATERIAL
nominal size

nominal size

nominal size

nominal size

40 mm nominal size
sources

Concrete Aggregate

manufactured sand
(0.2225 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
4.1.4 the cost
1:2:4 of centering
(1 Cement and shuttering
sand (zone-III) up from
derived to plinth levelsources
natural : : 4 graded
stone aggregate
Code Description 40 mm nominal size derived from natural
Rate sources).
Unit
MATERIAL
nominal size
0.56 - (7.5% for voids i.e.) 0.04 = 0.52 cum

nominal size

nominal size
2206 Carriage of Stone aggregate 40 mm nominal 178.19 cum

size and above

nominal size

(0.2225 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost
4.1.5 1:3:6 of centering
derived to plinth levelsources:
natural : 6 graded
Unit
MATERIAL
nominal size

nominal size

nominal size

(0.15674 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost
4.1.5A 1:3:6 of centering
(1 Cement and shutteringsand
: 3 manufactured - Allderived
work up from
to plinth level : concrete
Recycled
aggregate (RCA) : 6 graded stone aggregate 20 Rate
Code Description mm nominal Unit size Recycled
MATERIAL
nominal size

nominal size

40 mm nominal size

Concrete Aggregate
manufactured sand
(0.15674 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost
4.1.5B 1:3:6 of centering
: 3 manufactured - All
sand work up
derived to plinth
from levelconcrete
Recycled :
aggregate (RCA) : 6 graded stone aggregate 20 mm
Code Description nominalUnit
Rate size Recycled
MATERIAL
0274 Recycled Aggregate (RA) 20 mm nominal 398.00 cum
size
size
2202 Carriage of Recycled Aggregate below 40 163.93 cum
mm nominal size
Concrete Aggregate (RCA)

manufactured sand
(0.15674 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost
derived to plinth levelsources:
natural : 6 graded
Unit
MATERIAL
nominal size
(0.70 cum - 7.5% for voids i.e. 0.05 = 0.65
cum)

nominal size

size and above

nominal size

(0.15674 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost of centering and shuttering - All work up to plinth level :
4.1.6A 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled concrete
Rate size Recycled
MATERIAL
size
size
2206 Carriage of Recycled Aggregate 40 mm 178.19 cum
nominal size and above

mm nominal size

2203 Carriage of manufactured sand 163.93 cum
(0.15674 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost
derived to plinth levelsources
natural : : 8 graded
Unit
MATERIAL
nominal size
(0.70 cum - 7.5% for voids i.e. 0.05 = 0.65

cum)

nominal size

size and above

nominal size

(0.1175 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
4.1.8a the cost
1:4:8 of centering
: 4 manufactured - All
sand work up
derived to plinth
from levelconcrete
Recycled :
Rate size Recycled
MATERIAL
size
size

mm nominal size

(0.1175 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost
4.1.10 1:5:10 (1 of centering
cement and shuttering
sand (zone-III) up to
derived plinth
from levelsources:
natural : 10
graded stone
Code Description aggregate 40 mm nominal size derived from
Rate natural
Unit sources).
MATERIAL
nominal size
(0.70 cum - 7.5% for voids i.e. 0.05 = 0.65

cum)

nominal size

size and above

nominal size

(0.2225 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost
4.1.10a 1:5:10 (1 ofcement
centering
: 5 and shuttering -sand
manufactured All work up tofrom
derived plinthRecycled
level : concrete
aggregate (RCA) : 10 graded stone aggregate 40 Rate
Code Description mm nominal Unitsize Recycled
MATERIAL
size
size

mm nominal size

(0.2225 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
4.1.11 the cost
1:5:10 (1 of centering
cement andsand
: 5 fine shuttering - All
) derived worknatural
from up to plinth level
sources : graded stone
: 10
aggregate 40 mm nominal size derived from natural
Code Description sourcesUnit
Rate )
MATERIAL
nominal size
(0.70 cum - 7.5% for voids i.e. 0.05 = 0.65

cum)
nominal size

size and above

nominal size

(0.2225 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost of
4.1.12 1:2:3½:9 (1 centering and shuttering
ordinary portland cement- :All work
2 Fly up: to
ash 3½plinth
coarselevel
sand: (zone-III)
derived from natural sources : 9 graded stone aggregate 40 mm nominal size
MATERIAL
nominal size
(0.70 cum-7.5% for voids i.e. 0.05 = 0.65

cum)

nominal size

size and above

nominal size


LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one cum.
Say
the cost of
4.1.12a 1:2:3%:9 (1 centering and shuttering
ordinary portland cement- :All work
2 Fly up: to
ash plinth
31/2 level :
manufactured sand
derived
Code Description from Recycled concrete aggregate (RCA) : 9
Rate graded stone
Unit aggregate 40
MATERIAL
size
size

mm nominal size

1980 Fly ash 11.00 cum

2262 Carriage of Fly ash 163.93 cum

LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
the cost of(1centering
4.1.13 1:2½:4:11 ordinary and shuttering
portland - All
cement work
: 2½ fly up
ashto: 4plinth level
coarse :
sand(zone-III)
derived from
Code Description natural sources : 11 graded stone aggregate
Rate 40
Unit nominal size
mm
MATERIAL
nominal size
(0.70 cum-7.5% for voids i.e. 0.05 = 0.65

cum)

nominal size

size and above

nominal size


LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one cum.
Say
the cost of(1
4.1.13a 1:2%:4:11 centering
ordinaryand shuttering
portland cement- All work
: 2% fly up
ashto: plinth level :
4 manufactured sand
derived
Code Descriptionfrom Recycled concrete aggregate (RCA) :11
Rate graded stone
Unit aggregate 40
MATERIAL
size
size

mm nominal size

1980 Fly ash 11.00 cum

2262 Carriage of Fly ash 163.93 cum

LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
4.2.1 4.2 Providing and laying cement concrete in retaining

4.2.2 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived
Code Description from natural
Rate Unit sources).
MATERIAL
nominal size

nominal size

nominal size

(0.2833 cum)
LABOUR
0123 Mason (brick layer) 1st class 784.00 Day

cum with hooper
9999 Scaffolding 2.12 L.S.

(Extra labour for lifting material upto floor V
level = 0.75 x 2.5 = 1.88)
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say

4.2.2A 1:134:3 (1 cement : 134 coarse sand (zone- Ill) including manufactured sand
derived from Recycled concrete aggregate (RCA)Rate
Code Description upto 25% : 3 graded stone
Unit
MATERIAL
nominal size derived form natural sources

nominal size


nominal size

40 mm nominal size
sources


manufactured sand
(0.2833 cum)
LABOUR
0115 Coolie 645.00 day
0123 Mason (brick layer) 1st class 784.00 day
0124 Mason (brick layer) 2nd class 714.00 day

cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say

4.2.3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded
Code Description natural sources)
Unit
MATERIAL
nominal size

nominal size

nominal size

(0.2833 cum)
LABOUR

cum with hooper

level = 0.75 x 2.5 = 1.88)
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say

4.2.3A 1:2:4 (1 Cement : 2 coarse sand (zone- III) including manufactured sand derived
from Recycled concrete aggregate (RCA) upto 25%
Code Description : 4 graded
Rate Unitstone aggregate
MATERIAL

nominal size

nominal size

40 mm nominal size
sources


manufactured sand
(0.2225 cum)
LABOUR

cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say

4.2.5 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded
Code Description natural sources)
Unit
MATERIAL
nominal size

nominal size

nominal size

(0.15674 cum)
LABOUR

cum with hooper
9999 Scaffolding (17.60x2.5 avg.) 2.12 L.S.

level = 0.75 x 2.5 = 1.88)
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say

4.2.5A 1:3:6 (1 cement : 3 manufactured sand derived from Recycled concrete
Rate size Recycled
MATERIAL
nominal size

nominal size

40 mm nominal size

(0.15674 cum)
LABOUR

cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say

4.2.5b 1:3:6 (1 cement : 3 manufactured sand derived from Recycled concrete
Rate size Recycled
MATERIAL
size
size
40 mm nominal size

(0.15674 cum)
LABOUR

cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say

4.2.8 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources: 10
Code Description Ratefrom natural
Unit sources).
MATERIAL
nominal size

nominal size

size and above

nominal size


LABOUR

cum with hooper

level = 0.75 x 2.5 = 1.88)
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say

4.2.8A 1:5:10 (1 cement : 5 manufactured sand derived from Recycled concrete
Code Description Ratenominal
Unitsize Recycled
MATERIAL
size
size

mm nominal size


LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
4.3.1 4.3 Centering and shuttering including strutting, propping etc. and removal of form
work for :
4.3.1 Foundations, footings, bases for columns
Details of cost for footing size
2.7mx2.7mx1.00m
Contact area = 10.8 sqm.
MATERIAL
Assuming shuttering material will become
unserviceable after use of 40 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of

material @ 25% of cost
7319 Wall form panel 1250x500 mm 860.00 each

Qty taken for cost of using once =
16x0.85/40 = 0.34
7326 Corner angle 45x45x5 mm 1.50 m long 240.00 each
Qty taken for cost of using once = 4x0.85/40

= 0.085
7327 100 mm channel shoulder 2.5 m long 910.00 each

8x0.85/40= 0.17
7328 Double clip (bridge clip) 76.00 each

16x0.85/40 = 0.34
7329 Single clip 59.00 each

= 0.17
7330 M.S. tube 40 mm dia 215.00 metre

10.8x0.85/40 = 0.2295
9999 Assembly nuts & bolts 2.12 L.S.

9977 CARRIAGE 2.12 L.S.
LABOUR
0116 Fitter (grade 1) 784.00 Day
9999 Shuttering oil 2.12 L.S.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 10.8 sqm.
Cost per sqm.
Say
4.3.2 work for : walls, return walls, walls (any thickness) including attached pilasters,
Retaining
buttresses, plinth and string courses fillets, kerbsRate
Code Description and stepsUnit
etc.
Details for 7.9m long and 1.00m high wall
Area of contact 2x7.9x1.0 = 15.8 sqm.
MATERIAL


24x0.85/40 = 0.51

= 0.17

24x0.85/40 = 0.51

12x0.85/40 = 0.255

32x0.85/40 = 0.68
9999 Nut & Bolts 2.12 L.S.

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 15.8 sqm.
Cost per sqm.
Say
work for : piers, abutments, pillars, posts and struts
4.3.3 Columns,
Detail of cost for
Size of column 450x450mm and 2.5m high
Area of contact = 4x0.45x2.5 = 4.5 sqm.
MATERIAL
Assuming shuttering will become
Add maintenance charges @ 10% of cost of

material
Less salvage value of material after full use

@ 25% of cost of material

= 0.17
7332 Corner angle 45x45x5 m 2.50 m long 255.00 each

= 0.085
7333 Column clamp 450x1070 m 965.00 each

= 0.1063
7334 Prop 2 m ( 2-3.5m) 635.00 each

= 0.085
9999 Assembly nut & bolt 2.12 L.S.

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 4.5 sqm.
Cost per sqm.
Say
4.4.1 4.4 Providing and laying cement concrete in kerbs,

4.4.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources: 3
Unit sources)
Details of cost for kerb :
100m long 20cm deep and 30cm wide
100m x 0.30m x 0.20m = 6.00 cum.
Cement concrete 1:2:4

4.1.2 Rate as per Item No.4.1.2 of 7783.70 cum
SH:CONCRETE WORK
Cost for 6 cum.

Cost per cum.
Say
4.4.2 4.4 Providing and laying cement concrete in kerbs,

4.4.1A 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including manufactured sand
Code Description upto 25%Unit
: 3 graded stone
Details of cost for kerb :
100m long 20cm deep and 30cm wide
100m x 0.30m x 0.20m = 6.00 cum.
Cement concrete 1:1.5:3

4.1.2A Rate as per Item No.4.1.2A of SH:Concrete 7555.05 cum
Work
Cost for 6 cum.

Cost per cum.
Say
4.5.1 4.5 Providing and fixing up to floor five level precast

4.5.1 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3
graded stone aggregate 20mm nominal size derived
Rate Unit sources)
Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
MATERIAL
Cement concrete 1:1½:3
4.1.2 Rate as per Item Number 4.1.2 of SH: 7783.70 cum
Concrete work

(Extra labour for lifting = 0.45 x 0.45 x 2.5 =
0.51)
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
(2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @
23.55kg/m2 = 8.48 kg.
(ii) Flat 10x5mm

4x1.0 = 4.0m
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
6.70m @ 0.4kg/m = 2.68 kg.
Total = 11.16kg. or 0.112 qtl.

unserviceable after use of 40 times and
taking 75% credit.

0.112x0.75/40 = 0.0021 qtl = 0.21 kg
10.1 Rate as per item no.10.1 S.H. steel work 92.90 kg
(2) Moulding Platform

Assuming platform will become
unserviceable after use of 40 times.
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40 = 0.1
sqm
11.1.2 Rate as per item no. 11.1.2 of S.H.: Flooring 898.20 sqm
work
(ii) 25mm thick cement concrete 1:2:4 in

pavement
2.00x2.00x0.025 = 0.10cum
Qty taken for cost of using once = 0.100/40 =

0.0025 cum
11.7 Rate as per item no. 11.7 of S.H.: Flooring 7958.65 cum
work
9999 Mortar and labour for hoisting and finishing 2.12 L.S.
TOTAL
i.e. on (4029.46 - 3623.55) = 405.91
TOTAL
3623.55) = 409.97 x 0.1405
TOTAL
- 3623.55) = 467.57
TOTAL
i.e. on (4161.26 - 3623.55) = 537.71
Cost for 0.45 cum.

Cost per cum.
Say

4.5.1A 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) including manufactured sand
: 3 graded stone
Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
MATERIAL
Work

(Extra labour for lifting = 0.45 x 0.45 x 2.5 =
0.51)
(1) Mould
(i) Plate 3mm thick
(2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @
23.55kg/m2 = 8.48 kg.
(ii) Flat 10x5mm

4x1.0 = 4.0m
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
6.70m @ 0.4kg/m = 2.68 kg.
Total = 11.16kg. or 0.112 qtl.

taking 75% credit.

0.112x0.75/40 = 0.0021 qtl = 0.21 kg

1x2.0x2.0m = 4 sqm.
sqm
11.1.2 Rate as per item no. 11.1.2 of S.H.: Flooring 898.20 sqm
work

pavement
2.00x2.00x0.025 = 0.10cum
0.0025 cum
11.7A Rate as per Item No.11.7A of SH:Flooring 8148.55 cum
9999 Mortar and labour for hoisting and finishing 2.12 L.S.
TOTAL
i.e. on (3927.19 - 3521.28) = 405.91
TOTAL
3521.28) = 409.97 x 0.1405
TOTAL
- 3521.28) = 467.57
TOTAL
i.e. on (4058.99 - 3521.28) = 537.71
Cost for 0.45 cum.

Cost per cum.
Say
4.6.1 4.6 Providing and fixing at or near ground level

4.6.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from
natural sources: 3 graded stone aggregate 20 mmRate
Code Description nominal Unit
size derived from
Details of cost for 25 no kerbs, 40x30x20cm
=25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
MATERIAL
SH:CONCRETE WORK

(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm

Handle
2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.

taking 75% credit.

0.068x0.75/40 = 0.001275 qtl = 0.1275 kg

1x2.0x2.0m = 4 sqm.
sqm
11.1.2 Rate as per item no. 11.1.2 S.H.: Flooring 898.20 sqm
work.

pavement
2.00x2.00x0.025 = 0.100
0.0025 cum
11.7 Rate as per Item Number 11.7 of SH: 7958.65

Flooring
9999 Mortar and labour for finishing 2.12 L.S.
TOTAL
i.e. on (4848.74 - 4784) =
64.7399999999998
TOTAL
4784) = 65.3899999999998 x 0.1405
TOTAL
- 4784) = 74.579999999999
TOTAL
i.e. on (4869.77 - 4784) =
85.7699999999986
Cost for 0.6 cum.

Cost per cum.
Say
4.6.2 4.6 Providing and fixing at or near ground level

: 3 graded stone
Details of cost for 25 no kerbs, 40x30x20cm
=25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
MATERIAL
Work

(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm

Handle
2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.

taking 75% credit.

0.068x0.75/40 = 0.001275 qtl = 0.1275 kg

1x2.0x2.0m = 4 sqm.
sqm
work.

pavement
2.00x2.00x0.025 = 0.100
0.0025 cum
9999 Mortar and labour for finishing 2.12 L.S.
TOTAL
i.e. on (4712.18 - 4647.44) =
64.7399999999998
TOTAL
4647.44) = 65.3899999999998 x 0.1405
TOTAL
- 4647.44) = 74.579999999999
TOTAL
i.e. on (4733.21 - 4647.44) =
85.7699999999986
Cost for 0.6 cum.

Cost per cum.
Say

4.7.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3
Rate Unit sources).
Details of cost for 25 no blocks, 40x20x30cm
=25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
MATERIAL
SH:CONCRETE WORK

(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm

Handle
2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.

taking 75% credit.

0.068x0.75/80 = 0.001275 qtl = 0.1275 kg

1x2.0x2.0m = 4 sqm.
sqm
work.

pavement
2.00x2.00x0.025 = 0.100
0.0025 cum
11.7 Rate as per Item Number 11.7 of 7958.65

SH:Flooring
Mortar 1:3 for Fixing
0.202/100x25=0.051
3.8 Rate as per Item No 3.8 5024.15 cum
Extra for Labour for lifting
(27/100x25=0.675 or 0.68)

Labour for hoisting and setting in position

TOTAL
i.e. on (8271.23 - 4784) = 3487.23
TOTAL
4784) = 3522.1 x 0.1405
TOTAL
- 4784) = 4016.96
TOTAL
i.e. on (9403.5 - 4784) = 4619.5
Cost for 0.6 cum.

Cost per cum.
Say

: 3 graded stone
Details of cost for 25 no blocks, 40x20x30cm
=25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
MATERIAL
Work

(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm

Handle
2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.

taking 75% credit.

0.068x0.75/80 = 0.001275 qtl = 0.1275 kg

1x2.0x2.0m = 4 sqm.
sqm
work.

pavement
2.00x2.00x0.025 = 0.100
0.0025 cum
Mortar 1:3 for Fixing

0.202/100x25=0.051
3.8 Rate as per Item No 3.8 5024.15 cum
Extra for Labour for lifting
(27/100x25=0.675 or 0.68)


TOTAL
i.e. on (8134.67 - 4647.44) = 3487.23
TOTAL
4647.44) = 3522.1 x 0.1405
TOTAL
4647.44) = 4016.96
TOTAL
i.e. on (9266.94 - 4647.44) = 4619.5
Cost for 0.6 cum.

Cost per cum.
Say

4.8.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources: 3
graded stone aggregate 20 mm nominal size derived from natural sources) .
Details of cost for one block of overall size
1m x 0.50m and 0.10m thick having 6
vertical hollows, 40x20x30cm, finished
contents = 1mx0.5mx0.1m = 0.05cum
MATERIAL
Net qty = 0.05[6x0.5x{2x1/2(0.05+7)}x0.074]
= 0.023cum

SH:CONCRETE WORK
9999 Centering and shuttering including T&P 2.12 L.S.

charges, hire charges of steel mould, table
vibrator, rammer, bolts nuts & washers etc.
Cement mortar 1:2 for fixing
3.7 Rate as per Item No.3.7 of SH:MORTARS 5699.25 cum
LABOUR
Extra Labour for lifting material upto floor V
level

TOTAL
i.e. on (516.3 - 179.03) = 337.27
TOTAL
179.03) = 340.64 x 0.1405
TOTAL
179.03) = 388.5
TOTAL
i.e. on (625.81 - 179.03) = 446.78
Cost for 0.05 cum.

Cost per cum.
Say

: 3 graded stone
Details of cost for one block of overall size
1m x 0.50m and 0.10m thick having 6
vertical hollows, 40x20x30cm, finished
contents = 1mx0.5mx0.1m = 0.05cum
MATERIAL
Net qty = 0.05[6x0.5x{2x1/2(0.05+7)}x0.074]
= 0.023cum

Work
9999 Centering and shuttering including T&P 2.12 L.S.
charges, hire charges of steel mould, table
vibrator, rammer, bolts nuts & washers etc.
Cement mortar 1:2 for fixing
LABOUR
Extra Labour for lifting material upto floor V
level

TOTAL
i.e. on (511.04 - 173.77) = 337.27
TOTAL
173.77) = 340.64 x 0.1405
TOTAL
173.77) = 388.5
TOTAL
i.e. on (620.55 - 173.77) = 446.78
Cost for 0.05 cum.

Cost per cum.
Say
4.9 4.9 Precasting and placing in position 125 mm dia

Bollards 600 mm high of required shape includingRate
MATERIAL
3.14/4x(0.125)x(0.125)x0.60 = 0.007 cum
5.1.3 Rate as per Item no. 5.1.3 SH : RCC 7945.65 cum

3.14x(0.125)x0.60 = 0.24 sqm
5.9.1 Rate as per Item no. 5.9.1 SH : RCC 307.95 sqm
M.S. pipes ( medium class)
50 mm dia sleeve =1x0.30x5.10 =1.53 kg
40 mm dia pipe =1x0.45x3.61 =1.62 kg
M.S. plate 3mm thick =(0.15x0.15)x23.55

=0.53 kg
Total =3.68 kg
10.1 Rate as per Item no.10.1SH : Steel work 92.90 kg
Excavation
0.25x0.25x0.45 = 0.03 cum
2.8.1 Rate as per Item no. 2.8.1 SH : Earth work 286.85 cum

4.1.5 Rate as per Item no. 4.1.5 SH : Cement 6833.40 cum
concrete
6 mm rendering (1:3) (0.24+0.01) = 0.25 sqm
5.23 Rate as per Item no. 5.23 SH : RCC 253.05 sqm
9988 Carriage and fixing charges 2.12 L.S.
TOTAL
i.e. on (735.15 - 707.59) =
27.5599999999999
TOTAL
707.59) = 27.8399999999999 x 0.1405
TOTAL
707.59) = 31.7499999999999
TOTAL
i.e. on (744.1 - 707.59) = 36.5099999999999
Cost for one bollard

Say
4.10 4.9a Precasting and placing in position 125 mm dia Bollards 600 mm high of
required shape including providing M.S. Pipe Sleeve
Code Description Rate50 mmUnit
dia 300 mm long in
MATERIAL
3.14/4x(0.125)x(0.125)x0.60 = 0.007 cum
5.1.3A Rate as per Item No.5.1.3A of SH:Reinforced 7752.70 Cum

Cement Concrete

3.14x(0.125)x0.60 = 0.24 sqm

40 mm dia pipe =1x0.45x3.61 =1.62 kg

=0.53 kg
Total =3.68 kg
Excavation
0.25x0.25x0.45 = 0.03 cum

Work
6 mm rendering (1:3) (0.24+0.01) = 0.25 sqm
TOTAL
i.e. on (703.59 - 676.03) =
27.5599999999999
TOTAL
676.03) = 27.8399999999999 x 0.1405
TOTAL
676.03) = 31.7499999999999
TOTAL
i.e. on (712.54 - 676.03) =
36.5099999999999

Say
4.11 4.9b Precasting and placing in position 125 mm dia Bollards 600 mm high of
required shape including providing M.S. Pipe Sleeve
Code Description Rate50 mmUnit
dia 300 mm long in
MATERIAL
3.14/4x(0.125)x(0.125)x0.60 = 0.007 cum

Cement Concrete

3.14x(0.125)x0.60 = 0.24 sqm
40 mm dia pipe =1x0.45x3.61 =1.62 kg

=0.53 kg
Total =3.68 kg
Excavation
0.25x0.25x0.45 = 0.03 cum

4.1.5B Rate as per Item No.4.1.5B of SH:Concrete 5122.25 cum
Work
6 mm rendering (1:3) (0.24+0.01) = 0.25 sqm
TOTAL
i.e. on (682.81 - 655.25) =
27.5599999999999
TOTAL
655.25) = 27.8399999999999 x 0.1405
TOTAL
overheads on all except (A) i.e. on (687 -
655.25) = 31.7499999999999
TOTAL
i.e. on (691.76 - 655.25) =
36.5099999999999

Say
4.12 4.10 Providing and laying damp-proof course 40mm

thick with cement concrete 1:2:4 (1 cement : 2
Details of cost for 10 sqm
MATERIAL
Cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 12.5 mm
nominal size)
10x0.040 = 0.40 cum

4.1.3 Rate as per item no 4.1.3 of SH:Concrete 7365.15 cum
work
Add deduct for difference of cost between
20mm size and 12.5mm size

nominal size
0296 Stone Aggregate (Single size) : 12.5 mm 1350.00 cum

nominal size
Add for delay

9999 Sundries (Form work etc.) 2.12 L.S.
TOTAL
i.e. on (3515.89 - 2946.06) = 569.83
TOTAL
2946.06) = 575.53 x 0.1405
TOTAL
- 2946.06) = 656.39
TOTAL
i.e. on (3700.91 - 2946.06) = 754.85
Cost for 10 sqm

Cost for 1 sqm
Say
4.13 4.10A Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4
(1 cement : 2 coarse sand (zone-III) including manufactured
Code Description Rate sand derived from
Unit
MATERIAL
sand (zone-III) including manufactured sand
derived from Recycled Concrete Aggregate
(RCA) upto 25% : 4 graded stone aggregate
12.5 mm nominal size (Recycled Concrete
Aggregate (RCA) upto 25%))
10x0.040 = 0.40 cum

Work
Add deduct for difference of cost between

20mm size and 12.5mm size

nominal size

nominal size
0296 Stone Aggregate (Single size) : 12.5 mm 1350.00 cum

nominal size
0271 Recycled Concrete Aggregate (RCA) 12.5 957.00 cum

mm nominal size
Add for delay

TOTAL
i.e. on (3428 - 2849.82) = 578.18
TOTAL
2849.82) = 583.96 x 0.1405
TOTAL
- 2849.82) = 666.01
TOTAL
i.e. on (3615.73 - 2849.82) = 765.91
Cost for 10 sqm

Cost for 1 sqm
Say
4.14 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4
(1 cement : 2 coarse sand(zone-III) derived from natural
Code Description Rate sources:
Unit 4 graded stone
MATERIAL
Cement concrete 1:2:4 = 10x0.05 = 0.50
cum
4.1.3 Rate as per item no 4.1.3 of SH:Concrete 7365.15 cum
work
Add for delay :
TOTAL
i.e. on (4310.44 - 3682.58) = 627.86
TOTAL
3682.58) = 634.14 x 0.1405
TOTAL
- 3682.58) = 723.24
TOTAL
i.e. on (4514.31 - 3682.58) = 831.73
Cost for 10 sqm.

Cost of 1 sqm.
Say
4.15 4.11A Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4
(1 cement : 2 coarse sand (zone-III) including manufactured
Code Description Rate sand derived from
Unit
MATERIAL
sand (zone-III) including manufactured sand
derived from Recycled Concrete Aggregate
(RCA) upto 25% : 4 graded stone aggregate
20 mm nominal size (Recycled Concrete
Aggregate (RCA) upto 25%))
= 10x0.05 = 0.50 cum

Work
Add for delay :

TOTAL
i.e. on (4190.14 - 3562.28) = 627.86
TOTAL
3562.28) = 634.14 x 0.1405
TOTAL
- 3562.28) = 723.24
TOTAL
i.e. on (4394.01 - 3562.28) = 831.73
Cost for 10 sqm.

Cost of 1 sqm.
Say
4.16 4.12 Extra for providing and mixing water proofing material in cement concrete work
in doses by weight of cement as per manufacturer's
Code Description specification.
Rate Unit
Details of cost for per bag of 50kg. of cement
MATERIAL
Approved waterproofing’materials according
to the recommended proportions
1213 Water proofing materials 35.00 kilogra

m
9988 Carriage of water proofing material and 2.12 L.S.
labour for mixing etc.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per bag of cement of 50kg.
Say
4.17 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of
approved quality using 1.7kg per square metre onRate
Code Description damp proof
Unitcourse after
Details of cost for 10sqm.
MATERIAL
0309 Paving bitumen VG-10 of approved quality 25614.00 tonne
0771 Kerosene oil 50.00 litre

Fuel for heating
0370 Coal (steam) 440.00 quintal
2211 Carriage of Tar / Bitumen 163.93 tonne

LABOUR
Cleaning surface and applying kerosene oil

Heating the material
Spreading hot tar over damp proof course
0131 Painter 714.00 Day

9988 Sundries (Carriage of kerosene, steam coal, 2.12 L.S.
brushes, T&P etc.)
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
4.18 4.14 Extra for concrete work in superstructure above floor V level for each four floors
or part thereof.
Details of cost per cum.
Extra labour element required for lifting of
materials (0.75x2.00 = 1.50)

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1 cum.
Say
4.19 4.15 Extra for laying concrete in or under water and/or liquid mud including cost of
pumping or bailing out water and removing slush Rate
Code Description etc. complete.
Unit Note :- The
Details of cost for 14 cum per 0.3m depth
Quantity of concrete = 14 cum.
pumping hours = 3 hrs. or 0.375 day.
0011 Hire charges of Pumpset of capacity 4000 700.00 Day

litres/hour.

for cleaning slush
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 14cum. per 0.30 m depth
Cost of cum. per m depth

Say
4.20 4.16 Extra for laying concrete in or under foul positions.

Extra labour due to slow progress-

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1 cum.
Say
4.21 4.17 Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand derived Rate
Detail of cost for 10 sqm
MATERIAL
0287 Brick Aggregate (Single size) : 40 mm 650.00 cum
nominal size
2260 Carriage of Brick aggregate 178.19 cum

Dressing the gound including cutting and

filling upto 15cm

MATERIAL
Cement concrete 1:3:6 Qty. of cement
concrete 1:3:6 on 10 sqm. area = 0.5cum.

nominal size

nominal size
nominal size


Labour (for C.C 1:3:6)

9999 Hire and runing charges of mechanical mixer 2.12 L.S.

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
4.22 4.17A Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3
manufactured sand derived from Recycled concrete
Code Description Rate aggregate
Unit (RCA) : 6
MATERIAL
nominal size


filling upto 15cm

MATERIAL

nominal size

nominal size

nominal size

Concrete Aggregate




LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
4.23 4.17b Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3
manufactured sand derived from Recycled concrete
Code Description Rate aggregate
Unit (RCA) : 6
MATERIAL
nominal size


filling upto 15cm

MATERIAL

size
size
mm nominal size





LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
4.24 4.18 Extra for addition of synthetic Polyester triangular fibre of length 12mm, effective
diameter 10-40 microns and specific gravity of 1.34
Code Description to 1.40 in
Rate cement
Unit
Detail of cost for per bag of 50 kg of cement
used in concrete
MATERIAL
8732 Synthetic ployster triangular fibre of length 370.00 kg
12 mm, effective diameter 10-40 microns
and specific gravity of 1.34 to 1.40
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per bag of cement
Say
4.25.1.1 4.20 Providing and laying in position ready mixed or site batched design mix cement
concrete
4.20.1 All worksfor plain
upto cement
plinth level concrete
: work; using coarse aggregate and fine
4.20.1.1 Concrete of M10 grade with minimum cement content of 220kg/cum.
Details of cost for 1.00 cum
MATERIAL
nominal size
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

nominal size

size and above

nominal size


7318 Plasticizer / super plasticizer 29.00 kilogra
m
Production cost, pumping to respective floors
and laying in position
0004 Production cost of concrete by batch mix 400.00 cum

plant.
0009 Pumping charges of concrete including Hire 210.00 cum

charges of pump, piping work & accessories
etc.
Labour for pouring, consolidating & curing


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
upto cement
4.20.1.2 Concrete of M15 grade with minimum cement content of 240 kg/cum.
MATERIAL
nominal size
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

nominal size

size and above

nominal size


m

plant.

etc.


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
upto cement
MATERIAL
nominal size
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

nominal size

size and above

nominal size


m
plant.

etc.


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
upto cement
MATERIAL
nominal size
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

nominal size

size and above

nominal size


m

plant.

etc.


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
plinth andconcrete work;
upto floor using
V level : coarse aggregate and fine
4.20.2.1 Concrete of M10 grade with minimum cement content of 220kg/cum.
MATERIAL
nominal size
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

nominal size

size and above

nominal size


m

plant.

etc.


level = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
upto floor using
MATERIAL
nominal size
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

nominal size

size and above
nominal size


m

plant.

etc.


level = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
upto floor using
MATERIAL
nominal size
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

nominal size

size and above

nominal size


m

plant.

etc.


level = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
upto floor using
MATERIAL
nominal size
(0.70 - 7.5% for voids i.e. 0.05 = 0.65 cum)

nominal size

size and above

nominal size

m

plant.

etc.


level = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
4.26.1.1 4.20A Providing and laying in position ready mixed or site batched design mix cement
concrete
4.20A.1 All worksfor plain
upto cement
4.20A.1.1 Concrete of M10 grade with minimum cement content of 220kg/cum. (Note: The
permissible utilization of Recycled Concrete Aggregate
Code Description Rate (RCA)
Unitas coarse
MATERIAL
nominal size

nominal size
0276 Fine aggregate derived from Recycled 741.00 cum



m

plant.

etc.


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
upto cement
4.20A.1.2 Concrete of M15 grade with minimum cement content of 240 kg/cum. (Note: The
Unitas coarse
MATERIAL
nominal size
0272 Recycled Concrete Aggregate (RCA) (25%) 957.00 cum

20 mm nominal size

nominal size

Concrete Aggregate (RCA) (25%)


m

plant.
etc.


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
upto cement
Unitas coarse
MATERIAL
nominal size

20 mm nominal size

nominal size



m

plant.

etc.


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
upto cement
Unitas coarse
MATERIAL
nominal size

20 mm nominal size

nominal size



m

plant.

etc.


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
upto floor using
4.20A.2.1 Concrete of M10 grade with minimum cement content of 220kg/cum. (Note: The
Unitas coarse
MATERIAL
20 mm nominal size

nominal size



m

plant.

etc.


level = 0.75 X2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
upto floor using
Unitas coarse
MATERIAL
nominal size

20 mm nominal size

nominal size



m

plant.

etc.


level = 0.75 X2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
upto floor using
Unitas coarse
MATERIAL
nominal size

20 mm nominal size

nominal size



m

plant.

etc.

level = 0.75 X2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
upto floor using
Unitas coarse
MATERIAL
nominal size

20 mm nominal size

nominal size



m

plant.

etc.


level = 0.75 X2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
5.1.1 5.1 Providing and laying in position specified grade of reinforced cement concrete,
5.1.2 excluding the cost1.5
1:1.5:3 (1 cement: of centering,
coarse sandshuttering,
(zone-III) ifnishing and reinforcement-
derived from All3work
natural sources:
Unit sources).
MATERIAL
nominal size

nominal size

nominal size

(0.2833 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
excluding
5.1.2A 1:1.5:3 the cost: 1.5
(1 cement of centering, shuttering,
coarse sand (zone-Ill)ifnishing and
including reinforcement-sand
manufactured All work
derived from Recycled concrete aggregate (RCA)
Code Description Rateupto 20%
Unit : 3 graded stone
MATERIAL
nominal size derived from natural sources

nominal size


nominal size

40 mm nominal size
sources


manufactured sand
(0.2833 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
excluding
5.1.3 1:2:4 the cost
(1 cement of centering,
: 2 coarse shuttering,
sand (zone-III) ifnishing
derived and
from reinforcement-
natural sources: 4All work
graded
stone aggregate
Code Description 20 mm nominal size derived from natural
Rate sources).
Unit
MATERIAL
nominal size

nominal size

nominal size

(0.2225 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
5.1.3A excluding the cost
1:2:4 (1 cement of centering,
: 2 coarse sand shuttering, ifnishing and reinforcement-
including manufactured All work
sand derived from
Recycled concrete aggregate (RCA) upto 20% : 4 graded
Code Description Rate stone
Unit aggregate 20 mm
MATERIAL

nominal size


nominal size

40 mm nominal size
sources

manufactured sand
(0.2833 cum)
LABOUR
cum with hooper

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1 cum.
Say
5.2.1 5.2 Reinforced cement concrete work in walls (any thickness), including attached
pilasters,
5.2.2 1:1.5:3 buttresses,
(1 cement plinth and
: 1.5 coarse sandstring courses,
(zone-III) fillets,
derived fromcolumns, pillars, piers,
natural sources :3
Unit sources).
Details of cost for 9.18 cum.
MATERIAL
nominal size

nominal size

nominal size

(0.2833 cum)
LABOUR

cum with hooper

Extra labour for lifting of material upto floor V
level:
0.75x9.18x2.5

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 9.18 cum.
Cost for 1 cum.
Say
5.2.2 5.2 Reinforced cement concrete work in walls (any thickness), including attached
5.2.2A pilasters, buttresses,
1:1.5:3 (1 cement plinth and
: 1.5 coarse sandstring courses,
including fillets, columns,
manufactured pillars,from
sand derived piers,
Recycled concrete aggregate (RCA) upto 20% : 3 graded
Code Description Rate stone
Unit aggregate 20
MATERIAL

nominal size


nominal size

40 mm nominal size
sources


manufactured sand
(0.2833 cum)
LABOUR
0002 Hire charges of Concrete Mixer 0.25 to 0.40 800.00 day

cum with Hopper
0012 Vibrator (Needle type 40 mm) 350.00 day

Extra labour for lifting of material upto floor V
level : 0.75 x 9.18 x 2.5

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 9.18 cum
Cost of 1 cum
Say
5.3 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having
slope up to 15° landings, balconies, shelves, chajjas,
Code Description Rate lintels,
Unitbands, plain
MATERIAL
nominal size
nominal size

nominal size

(0.2833 cum)
LABOUR
cum with hooper

Extra labour for lifting material upto floor V
level:
Coolie (2.5x0.75=1.88)

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1 cum.
Say
5.4 5.3A Reinforced cement concrete work in beams, suspended floors, roofs having
slope up to 15° landings, balconies, shelves, chajjas,
Code Description Ratelintels,Unit
bands, plain window
MATERIAL
nominal size

nominal size

nominal size

nominal size

40 mm nominal size

Concrete Aggregate

manufactured sand
(0.2833 cum)
LABOUR
cum with hooper

level:
Coolie (2.5x0.75=1.88)

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1 cum.
Say
5.5 5.4 Providing and laying up to floor five level reinforced cement concrete in kerbs,
steps and the like excluding the cost of centering,Rate
Code Description shuttering,
Unit finishing and
MATERIAL
4.4.1 Cement concrete 1:2:4 7783.70 cum
(Rate as per item no 4.4.1 of SH:Concrete
work)
LABOUR
Extra labour for laying CC in RCC work :

0128 Mate 714.00 Day

level : Coolie = 0.75 x 2.5 = 1.88)

TOTAL
i.e. on (9292.08 - 7783.7) = 1508.38
TOTAL
7783.7) = 1523.46 x 0.1405
TOTAL
- 7783.7) = 1737.51
TOTAL
i.e. on (9781.84 - 7783.7) = 1998.14
Cost for 1 cum.

Say
5.6 5.4a Providing and laying up to floor five level reinforced cement concrete in
kerbs, steps and the like excluding the cost of centering,
Code Description Rate shuttering,
Unit finishing
MATERIAL
Work
LABOUR
Extra labour for laying CC in RCC work :

0128 Mate 714.00 Day

level : Coolie = 0.75 x 2.5 = 1.88)

TOTAL
i.e. on (9063.43 - 7555.05) = 1508.38
TOTAL
7555.05) = 1523.46 x 0.1405
TOTAL
- 7555.05) = 1737.51
TOTAL
i.e. on (9553.19 - 7555.05) = 1998.14
Cost for 1 cum.

Say
5.7 5.5 Reinforced cement concrete work in arches, archribs, domes, vaults, shells,
folded plate and roofs having slope more than 15°Rate
Code Description up to floor five level, excluding
Unit
Details of cost for 26.73cum for semicircular
arch 6m clear span and 9m long and 30cm
thick.
Cement concrete 1:2:4 =

1x0.50x3.14x6.30x9.00x0.30 = 26.73cum
MATERIAL
nominal size

nominal size
nominal size

(0.2833 cum)
LABOUR
cum with hooper

Extra for laying CC over curved surfaces

level : Coolie = 0.75 x 2.5 x 26.73 = 50.12)

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 26.73 cum.
Cost for 1 cum.
Say
5.8 5.5A Reinforced cement concrete work in arches, arch ribs, domes, vaults, shells,
folded plate and roofs having slope more than 15°Rate
Code Description up to floor five level excluding
Unit
Details of cost for 26.73cum for semicircular
arch 6m clear span and 9m long and 30cm
thick.
Cement concrete 1:1.5:3 =

1x0.50x3.14x6.30x9.00x0.30 = 26.73cum
MATERIAL
nominal size

nominal size

nominal size

nominal size

40 mm nominal size
sources


(0.2833 cum)
LABOUR
cum with hooper

Extra for laying CC over curved surfaces

level : Coolie = 0.75 x 2.5 x 26.73 = 50.12)

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 26.73 cum.
Cost for 1 cum.
Say
5.9 5.6 Reinforced cement concrete work in chimneys, shafts, up to floor five level ,
excluding the cost of centering, shuttering, finishing
Code Description and reinforcement
Rate Unit with
MATERIAL
RCC 1:1½:3 in chimneys & shafts
SH:REINFORCED CEMENT CONCRETE
LABOUR
Extra labour involved for lifting materials

TOTAL
i.e. on (10352.75 - 10185.05) =
167.700000000001
TOTAL
10185.05) = 169.380000000001 x 0.1405
TOTAL
(10378.23 - 10185.05) = 193.18
TOTAL
i.e. on (10407.21 - 10185.05) = 222.16
Cost for 1 cum.

Say
5.10 5.6A Reinforced cement concrete work in chimneys, shafts, up to floor five level
excluding the cost of centering, shuttering, finishing
Code Description Rate and
Unitreinforcement
MATERIAL
RCC 1:1½:3 in chimneys & shafts
Cement Concrete
LABOUR
Extra labour involved for lifting materials

TOTAL
i.e. on (10169.4 - 10001.7) =
167.700000000001
TOTAL
10001.7) = 169.380000000001 x 0.1405
TOTAL
(10194.88 - 10001.7) = 193.18
TOTAL
i.e. on (10223.86 - 10001.7) = 222.16
Cost for 1 cum.

Say
5.11 5.7 Reinforced cement concrete work in well-steining, excluding the cost of
centering, shuttering, finishing and reinforcementRate
Code Description with 1:1.5:3
Unit(1 cement : 1.5
MATERIAL
RCC 1:1½:3 in well steining
SH:CONCRETE WORK
LABOUR
Extra labour involved :
TOTAL
i.e. on (7835.3 - 7783.7) =
51.6000000000004
TOTAL
7783.7) = 52.1200000000004 x 0.1405
TOTAL
- 7783.7) = 59.4400000000005
TOTAL
i.e. on (7852.06 - 7783.7) =
68.3600000000006
Cost for 1 cum.

Say
5.12 5.7A Reinforced cement concrete work in well-steining excluding the cost of
centering, shuttering, finishing and reinforcement,Rate
Code Description with 1:1.5:3
Unit (1 cement : 1.5
MATERIAL
RCC 1:1½:3 in well steining

Work
LABOUR
Extra labour involved :
TOTAL
i.e. on (7606.65 - 7555.05) =
51.6000000000004
TOTAL
7555.05) = 52.1200000000004 x 0.1405
TOTAL
- 7555.05) = 59.4400000000005
TOTAL
i.e. on (7623.41 - 7555.05) =
68.3600000000006
Cost for 1 cum.

Say
5.13 5.8 Reinforced cement concrete work in vertical and horizontal fins individually or
forming box louvers, facias and eaves boards above
Code Description Rateplinth Unit
level up to floor five
Details of cost for 4 RCC Vertical fins 4m
high and 1m center with 2 horizontal fins, all
projecting 60cm from face of wall and 5cm
thick = 0.66 cum.
Cement Concrete 1:1.5.3

4x4x0.60x0.05 = 0.48 cum.
2x3x0.06x0.05 = 0.18 cum.
Total = 0.66 cum.

MATERIAL
nominal size

nominal size

nominal size

(0.2833 cum)
LABOUR
9999 Scafolding 2.12 L.S.

cum with hooper

Extra for restricted working in fins

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 0.66 cum.
Cost for 1 cum.
Say
5.14 5.8A Reinforced cement concrete work in vertical and horizontal fins individually or
forming box louvers, facias and eaves boards above
Code Description Rateplinth Unit
level up to floor five
Details of cost for 4 RCC Vertical fins 4m
high and 1m center with 2 horizontal fins, all
projecting 60cm from face of wall and 5cm
thick = 0.66 cum.
Cement Concrete 1:1.5.3

4x4x0.60x0.05 = 0.48 cum.
2x3x0.06x0.05 = 0.18 cum.
Total = 0.66 cum.

MATERIAL
nominal size

nominal size

nominal size

nominal size
40 mm nominal size
sources


manufactured sand
(0.2833 cum)
LABOUR

cum with hooper

Extra for restricted working in fins

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 0.66 cum.
Cost for 1 cum.
Say
for
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete
2.7mx2.7mx1.00m
MATERIAL


16x0.85/40 = 0.34

= 0.085

8x0.85/40= 0.17

16x0.85/40 = 0.34

= 0.17

10.8x0.85/40 = 0.2295

Qty taken for cost using once =
1040x0.85/40 = 22.10

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 10.8 sqm.
Cost per sqm.
Say
5.9.2 for
Walls (any thickness) including attached pilasters, butteresses, plinth and string
courses etc.
MATERIAL

2x3x2x2 = 24Nos.
24x0.85/40 = 0.51
4x2 = 8
= 0.17

2x6x2 = 24
24x0.85/40 = 0.51

2x3x2 = 12
12x0.85/40 = 0.255

2x2x8m = 32m
32x0.85/40 = 0.68
9999 Nut & Bolts 2.12 L.S.

1300x0.85/40 = 27.62
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 15.8 sqm.
Cost per sqm.
Say
for
5.9.3 Suspended floors, roofs, landings, balconies and access platform
Detail of cost for a room
4.50x3 = 13.50 sqm, height 3.5 m
MATERIAL

1. Plates (size 0.75 x 0.60)
Angle 40x40x5mm
2x0.75 = 1.50 m
2x0.60 = 1.20 m
= 2.70 m @ 3.00 kg/m = 8.1 kg
sheet 1.6 mm thick

0.75x0.60 = 0.45 sqm
0.45 sqm @ 12.55kg/sqm = 5.65kg
Weight of one plate = 13.75kg
Add for wastage @ 5% = 0.69 kg
Total = 14.44kg
Total weight of all plates = 5x6x14.44 =
433.2 kg.
433.2x0.85/40 = 9.2055 kg
7342 Adjustable span ESO+SI (2.35-3.40) 1480.00 each
Qty taken for cost using once = 5x0.85/40 =

0.1063
7343 Adjustable telescopic prop 3 m (2.02-3.75 m) 955.00 each

0.1275
9999 4. Assembly nut & bolts etc. 2.12 L.S.

1040x0.85/40 = 22.10

LABOUR
9999 Sundries, paper tap etc. 2.12 L.S.
TOTAL
i.e. on (7886.84 - 792.59) = 7094.25
TOTAL
792.59) = 7165.19 x 0.1405
TOTAL
- 792.59) = 8171.9
TOTAL
i.e. on (10190.28 - 792.59) = 9397.69
Cost for 13.50 sqm.

Cost per sqm.
Say
for
5.9.4 Shelves (Cast in situ)
4.50x3 = 13.50 sqm, height 3.5 m
MATERIAL

1. Plates (size 0.75 x 0.60)
Angle 40x40x5mm
2x0.75 = 1.50 m
2x0.60 = 1.20 m
= 2.70 m @ 3.00 kg/m = 8.1 kg
sheet 1.6 mm thick

0.75x0.60 = 0.45 sqm
0.45 sqm @ 12.55kg/sqm = 5.65kg
Total = 14.44kg
433.2 kg.
433.2x0.85/40 = 9.2055 kg

0.1063

0.1275
9999 4. Assembly nut & bolts etc. 2.12 L.S.

1040x0.85/40 = 22.10

LABOUR
9999 Sundries, paper tap etc. 2.12 L.S.
TOTAL
i.e. on (7886.84 - 792.59) = 7094.25
TOTAL
792.59) = 7165.19 x 0.1405
TOTAL
- 792.59) = 8171.9
TOTAL
i.e. on (10190.28 - 792.59) = 9397.69
Cost for 13.50 sqm.

Cost per sqm.
Say
for
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
Consider a beam of 6 m clear span, 0.50 m
deep 0.30 m wide and height 3.5 m from
floor
Cubical contents
6.60x0.5x0.3 = 0.99 cum
1x1.30x6.00 = 7.80 sqm
MATERIAL

material

1. Steel plates for side and bottom (plate size

1.20 x 0.50m)
Angle 40x40x5mm
2x1.20 = 2.40 m
3x0.50 = 1.50 m
3.90 m @ 3.00 kg/m = 11.70 kg
sheet 1.6 mm thick

1.20m x 0.50 m = 0.60 sqm.
0.60 sqm @ 12.55 kg/sqm. = 7.53 kg.
Weight of one plate = 19.23 kg.
Add for wastage @ 5% = 0.96 kg.
Total = 20.19 kg.

Total weight of all plates
3x5x20.19 = 302.85 kg or 3.03 q

302.85x0.85/40 = 6.4356 kg.

= 0.1275 m
7344 Beam clamp 300-380 mm (450-1070 mm) 355.00 each

set
= 0.1063 m
9999 (iv) Assembly nut & bolts etc. 2.12 L.S.

1040x0.85/40 = 22.10

LABOUR
9999 Sundries, paper tape etc. 2.12 L.S.
TOTAL
i.e. on (3653.17 - 554.11) = 3099.06
TOTAL
554.11) = 3130.05 x 0.1405
TOTAL
- 554.11) = 3569.82
TOTAL
i.e. on (4659.4 - 554.11) = 4105.29
Cost for 7.80 sqm.

Cost per sqm.
Say
for
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts
Detail of cost for 4.5 sqm
Size of column 450x450mm and 2.5m high
Area of contact = 4x0.45x2.5 = 4.5 sqm.
MATERIAL

material

= 0.17
7332 Corner angle 45x45x5 m 2.50 m long 255.00 each

= 0.085
7333 Column clamp 450x1070 m 965.00 each

= 0.1063
7334 Prop 2 m ( 2-3.5m) 635.00 each

= 0.085
9999 Assembly nut & bolt 2.12 L.S.

1300x0.85/40 = 27.62

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 4.5 sqm.
Cost per sqm.
Say
for
5.9.7 Stairs, (excluding landings) except spiral-staircases
Details of cost for 5.79 sqm.
Details of staircase, 3.40m clear span

including 1m landing.
MATERIAL
(i) Cost of plank 38mm (2nd class kail wood)
Waist 2.69x1.30 = 3.50sqm.
Side shuttering of steps and side of waist-

Steps
= 8x1.30x1.15 = 1.56 sqm.
Face of landing
1x1.30x0.15 = 0.20 sqm.
Side of waist
2.69x0.13 = 0.35 sqm.
Side of steps-
8x0.50x0.30x0.15 = 0.18sqm.
Total = 5.79 sqm.

Wastage 5% = 0.29sqm.
Total = 6.08 sq.
Cubical content-
6.08x0.038 = 0.231 cum = 231 dm³
Qty taken for cost using once = 231/8=

28.875 cudm
(ii) Batten 100mm x 75mm
4x1.30x0.100x0.075=0.039 cum = 39 dm³

Qty taken for cost using once = 39/8 = 4.875
cudm
2x4x0.80 = 6.40m
Qty taken for cost using once = 6.4/8 = 0.8 m
Planks = 0.231 cum.

Battens = 0.039 cum.
Ballies 6.4x3.142/4x(0.125)² = 0.079cum.
Total = 0.349 cum.

Qty taken for cost using once = 0.349/8 =
0.04363 cum

LABOUR
For assembling, erection, dismantling and
cleaning
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 5.79 sqm.
Cost per sqm.
Say
for
5.9.8 Spiral staircases (including landing)
Detail of cost for 6.28 sqm (For 10 steps)
Treads
10x0.70x0.20(av.) = 1.40 sqm
5.9.5 Rate as per Item Number 5.9.5 of SH: : RCC 602.60 sqm
Riser
2x10x0.70x0.23 = 3.22 sqm
5.9.2 Rate as per item no 5.9.2 of SH : RCC 669.55 sqm
Newal Post (Column)

10x3.14x0.232 = 1.66 sqm
5.9.7 Rate as per item no 5.9.7 of SH: RCC 657.75 sqm
Cost of 6.28 sqm

Cost of 1 sqm
Say
for
5.9.9 Arches, domes, vaults up to 6 m span
Details of cost for a semicircular arch 3.6m
clear span and 3.6m long.
Area of centering = 22x1.8x3.6=20.37sqm.
MATERIAL
Frame work in 2nd class kail wood
Tie-1x3.6x0.15x0.20 = 0.108cum.
Struts-3x1.8x0.10x0.10 =0.054cum
Struts-2x2.55x0.10x0.10=0.051cum.
Ribs-4x1.38x.075x0.075=0.031cum.
Total = 0.244 cum.

Quantity for 7 such frames
7x0.244 = 1.708cum.
Strips 5cmx2.5cm = 7.5cm
center to center
5.66/0.075x0.05x0.025x3.6 = 0.342cum.
Total = 2.050 cum = 2050 cudm
Qty taken for cost using once = 2050/8 =

256.25 cudm
Safeda ballies 125 mm dia
7x4x3.6= 100.8m
G.I. Plain sheet 20.37 sqm m 116kg. Or 1.16

quintal
Qty taken for cost using once =1.16/8 =

0.145 qtl
0992 Galvanised steel plain sheets 5000.00 quintal
Carriage-
Kail wood = 2.05cum.
Ballies - 100.8x(0.125)²/4x3.142 = 1.24cum.
Total = 3.29 cum.

0.4112 cum

G.I. Sheet = 0.116 t
0.0145 t
2302 Carriage of G.I. sheet and accessories 145.72 tonne
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 20.37sqm.
Cost per sqm.
Say
for for arches, domes, vaults exceeding 6 m span
5.9.10 Extra
Details of cost for 33.31 sqm
Centering and shuttering for arches and

carved surface exceeding 6m in span (an
average of 8m)
Radius R = 5m 2R-2 = 8
tan -¹ (4/3)=53.28°
2x53.28° = 106°
Surface area
=2x22/7x5x3.6x106/360=33.31sqm.
Arc=9.25m
MATERIAL
Tie-2x8x0.18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x1.77x0.1x0.1=0.035cum.
Ribs-6x1.54x0.23x0.1=0.213cum.
Struts-2x1.72x0.1x0.1=0.034cum.
Total=0.476cum.
For four such frames
=0.476x4 = 1.904 cum.
laggings-75x3.6x0.125x0.075=2.531cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6x0.175x0.075=0.378
Vertical post-4x4x3.6x0.15x0.15=1.296
Total =7.103cum. or 7103 cudm
Qty taken 1/8th of qty for cost using once

=7.103/8 = cum = 887.9 Cudm

Fittings:
3 way straps 50mmx10mm = 32 Nos.
32 no. @0.50cm each = 16m
Straps-50mmx10mm = 8 Nos. @0.25cm

each = 2m
Total = 18m
18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q
Qty taken l/8th of qty for cost using once =
0.702/8 = 0.08775
1225 Mild steel flat strap fitting 4120.00 quintal
Bolts 160 Nos. 254 mm long 16mm dia.-

160x.254x 1.58=64.21 kg=0.64q.
Qty taken l/8th of qty for cost using once

=0.64/8 = 0.08
1034 Bolts and nuts upto 300 mm in length 5200.00 quintal
Qty taken 1/8th of qty for cost using once =

0.1342/8 = 0.01677 t say 0.0168 t
LABOUR
Less Cost of shuttering etc. for an arch
exceeding 6 m span i.e. for an average of 8
m span
TOTAL
i.e. on (-1043.2 - -60832.39) = 59789.19
TOTAL
0.1405) on all except (A) i.e. on (-
445.309999999997 - -60832.39) = 60387.08
x 0.1405
TOTAL
- -60832.39) = 68871.46
TOTAL
i.e. on (18369.79 - -60832.39) = 79202.18
Cost of 33.31sqm.
Cost per sqm of soffit area
Say
for
5.9.11 Chimneys and shafts
MATERIAL

2x3x2x2 = 24 Nos. Qty taken for cost of

using once = 24x0.85/40 = 0.51
4x2 = 8
= 0.17

2x6x2 = 24
24x0.85/40 = 0.51

2x3x2 = 12
12x0.85/40 = 0.255

2x2x8m = 32m
32x0.85/40 = 0.68
9999 Nut & Bolts 2.12 L.S.

1300x0.85/40 = 27.63

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 15.8 sqm.
Cost per sqm.
Say
for steining
5.9.12 Well
Details of cost 26.39 sqm.
Surface area
Outside area =22/7x4.40x1.00 - 13.82sqm =
26.39 sqm
MATERIAL
Assuming that the timber will become
unserviceable after being used 8 times
Planks 38 mm (Second class kail wood)
26.39x0.038 = 1.00cum.
Wastage 20% = 0.20cum.
Total = 1.20cum. or 1200 cudm.
Qty for cost using once = 1200/8=150 cudm
2nd class kail wood battens
Inside = 2x25x0.50x0.075x0.038 =
0.0712cum.
Outside = 2x28x0.50x0.075x0.038 =
0.0798cum.
Total = 0.1510cum.
Wastage 5% = 0.0076 cum.
= 0.1586 cum = 158.60 cudm
Qty for cost using once = 0.1586/8= 0.0198

cudm

Inside: 25x1.00 = 25.00m
Outside: 28x1.00 = 28.00m
Total = 53.00m
Qty for cost using once = 53/8 =6.625 m
TOTAL
Add for carriage, labour for erectio ad
dismentalig etc @ 1/6 (16.667%) of cost of
material
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 26.39sqm.
Cost per sqm.
Say
5.9.13 for
Vertical and horizontal fins individually or forming box louvers band, facias and
eaves boards
Details of cost for fins 4 vertical fins 4 metre
high and at 1 metre centres, with two
horizontal fins all projecting 60cm from face
of wall and 5 cm thick.
i.e. (4x4x1.25) + (2x3x0.65) = 23.90sqm
MATERIAL
38mm thick-
4x4x1.25=20.00
2x3x0.65 =3.90
Total = 23.90
Wastage @ 5% = 1.20
Total = 25.10sqm.
25.10x0.038=.954 cum or 954 cudm
Qty for cost using once = 954/8 = 119.25

cudm
4x2x5x0.60x0.075x0.050=0.090
3x2x5x1.00x0.075x0.050=0.112
2x6x0.60x0.075x0.100=0.054
= 0.256 Cum.
Wastage® 5% =0.013 cum
= 0.269 cum= 269 cudm

Qty for cost using once = 269/8 = 33.625
cudm
2x2x6x4.00 =96m
Wastage @5% = 4.8m
Total= 100.8 m
Qty for cost using once = 100.8/8 = 12.6 m

Planks = 0.954
Battens = 0.269
Bailies 100.8x(0.125)²/4x3.142=1.238cum.
Total = 2.461 cum

Qty for cost using once = 2.461/8 = 0.3076
cum
LABOUR
For assembling, erection, dismantling and
cleaning
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 23.90 sqm.
Cost per sqm.
Say
5.9.15 for
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window
sills, string courses, bands, copings, bed plates, anchor
Code Description Rate blocks
Unit and the like
2.7mx2.7mx1.00m
MATERIAL


16x0.85/40 = 0.34

= 0.085

= 0.17

16x0.85/40 = 0.34

= 0.17

4x2.7m = 10.8m
10.8x0.85/40 =0.2295

1040x0.85/40 = 22.10

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 10.8 sqm.
Cost per sqm.
Say
5.15.16.1 5.9 Centering and shuttering including strutting, propping etc. and removal of form
for
5.9.16 Edges of slabs and breaks in floors and walls
5.9.16.1 Under 20 cm wide
Details of cost for a 3mx3m slab 15cms thick
12m edge Length
MATERIAL
unserviceable after being used 8 times.
(i) Planks 30mm thick (2nd class Kail wood

or equivalent local soft wood)
4x3x0.15x0.030=0.054cum
Wastage @5% = 0.003 cum.
Total = 0.057 cum 57 cudm
Qty taken for cost of using once = 57/8

=7.125 cudm
(ii) Battens 75mmx100mm (2nd class Kail

wood)
Horizontal 2x4x0.075x0.1x0.5=0.030
Horizontal 2x4x0.075x0.1x1.5=0.090
(iii) Vertical battens

16x0.15x0.075x0.030m = 0.0054
(iv) Struts
16x0.25x0.075x0.075=0.0225
Total = 0.1479
Wastage @5% = 0.0074
Qty taken for cost ef using once = 155/8

=19.375 cudm

Planks = 0.057 cum.
Total = 0.212 cum.
0.0265 cum
LABOUR
For assembling erection dismantling &
cleaning.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 12 metres
Cost of one meter
Say
5.15.16.2 5.9 Centering and shuttering including strutting, propping etc. and removal of form
for
5.9.16 Edges of slabs and breaks in floors and walls
5.9.16.2 Above 20 cm wide
Details of cost for 4mx4xslab 25cms thick 16
metre edge length
Shuttering surface area = 16 x 0.25 = 4 sqm
MATERIAL
(i) Planks 38mm thick

4x4x0.25x0.038 = 0.152
Wastage @ 5% = 0.008
Total = 0.160 cum. = 160 cudm
Qty taken for cost of using once = 160/8 =

20 cudm
(ii) Battens
6x2x0.6x0.075x0.100=0.054
5x2x1.5x0.075x0.100=0.113
Total = 0.167
Wastage @ 5% = 0.008
Total = 0.175 cum. = 175 cudm
Qty taken for cost of using once = 175/8 =

21.88 cudm

Planks = 0.16 cum.
Total = 0.335 cum.
0.0419 cum
LABOUR
For assembling erection dismantling &
cleaning.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 4 sqm.
Cost of 1 sqm.
Say
for
5.9.17 Cornices and mouldings
Details of cost for 10m long moulding 10cm
projection,
20cm depth and 40cm girth
Area in contact 10x0.4 = 4.0 sqm.
MATERIAL
(I) Planking 30mm thick = 4sqm.
Extra & Wastage 20% = 0.8 sqm.
Total = 4.8 sqm.

4.8x0.038 = 0.182 cum = 182 cudm

22.75 cudm

(ii) Battens-Joining to Planking
1x10x0.1x0.075 = 0.075 cum.
From bottom shuttering

10x1.5x0.1x0.075 = 0.113 cum.
Wales
10x0.4mx0.1x0.075 = 0.030 cum.

27.25 cudm
2447 Hollock ballies 125 mm diameter 36.00 metre
(iii) Ballies 125 mm dia.

Slant 10x0.3 = 3 m
ver. 6x3.5 = 21.0 m
Total = 24.0 m
Wastage @ 5% = 1.2 m
Total = 25.2 m
3.15m

Planking = 0.188 cum.
Battens & Wales = 0.218 cum.
Ballies
25.2x22/7x(0.125)/4 = 0.310 cum.
Total = 0.710 cum.

Qty taken for cost using once = 0.71/8=
0.0888 cum
LABOUR
Labour for assembling, erection, dismantling
& cleaning

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 4 sqm.
Cost of 1 sqm.
Say
5.9.18 for
Small surfaces such as cantilever ends, brackets and ends of steps, caps and
bases to pilasters and columns and the like
Details of cost for a bracket
1.20m projected
Front area 0.50x0.60m
End area 0.50x0.75m
Area in contact with concrete
2x{(0.60.75)/2x1.2} = 1.62 sqm.
Front 0.5x0.6 = 0.30 sqm.
Bottom 0.5x1.21 = 0.605 sqm.
Total = 2.525 sqm.

MATERIAL
Timber IInd class kail wood or equivalent

local soft wood
(I) Plank 30mm thick.

Sides 2{(0.60.75)/2x1.238} = 1.6713sqm
Battens 0.576x1.21 = 0.697
Front 0.5x0.638 = 0.319

Total = 2.687 sqm.
Cubical contents
2.687x0.038 = 0.102 cum.
Wastage @ 5% = 0.005 cum.
Total = 0.107 cum.

13.375 cudm
(ii) Battens-0.05x0.05
2x1.238 = 2.476m
2x1.21 = 2.42m
2x0.688 = 1.376m
2x0.838 = 1.676m
3x0.5 = 1.50m
Total = 9.448m
Cubical contents
9.448x0.05x0.05 = 0.024 cum.
Wastage 5% = 0.0012 cum.
Total = 0.0252 cum = 25.2 cudm

3.15 cudm
(iii) Ballies 125mm dia.

1x2.5 = 2.50m
1x2.65 = 2.65m
Total = 5.15 m
Wastage 5% = 0.26m
Total = 5.41 m
Qty taken for cost using once = 5.41/8=
0.6763 m

Planks = 0.107 cum.
Ballies
5.41x22/7x(0.125²/4 = 0.066 cum.
Total = 0.198 cum

0.0248 cudm
LABOUR
& cleaning

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 2.525 sqm.
Cost of 1 sqm.
Say
for
5.9.19 Weather shade, Chajjas, corbels etc., including edges
Details of cost for a weather shade
Area of centring and shuttering = 0.954 sqm
For a weather shade over a window of size
1.5mx1.2m
Size of weather shade 1.80x0.45m
Thickness at front = 0.05m
Thickness at fixed edge = 0.07m
Area in contact with concrete Bottom

1x0.45x1.80 = 0.810
1x0.05x1.80 = 0.094
2x0.45x0.06 = 0.027
Total = 0.954 sqm.
MATERIAL
(i) Planking 38mm thick.

Bottom 1x1.876x0.488 = 0.915 sqm.
1x1.876x0.05 = 0.94 sqm.
2x0.45x0.06 = 0.027 sqm.
Total = 1.036 sqm.

Add 5% wastage = 0.052 sqm.
Total = 1.088 sqm.

Cubic contains
1.088x0.038 = 0.041 cum = 41 cudm
Qty taken for cost using once = 41/8 = 5.125

cudm
(ii) Battens-
2x0.60x0.075x0.10 = 0.009
Ends with bearing center

1x0.45x0.075x0.10 = 0.003
Qty taken for cost using once =12/8=1.50

cudm
(iii) Ballies 125mm dia.

2x2.1 = 4.2m
Wastage 5% = 0.21m
Total = 4.41 m
0.5513 m
Carriage:
Plank = 0.041 cum.

Ballies
4.41x22/7x(0.125)²/4 = 0.054 cum.
Total = 0.107 cum

0.01338 cum
LABOUR
& cleaning

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 0.954 sqm.
Cost of 1 sqm.
Say
5.9.20 for
Suspended floors, roofs, landings, balconies and access platform with water
proof ply 12 mm thick
4.50x3 = 13.50 sqm, height 3.5 m
MATERIAL

10.1 Rate as per Item No.10.1 of SH:Steel Work 92.90 kg
Plates (size 0.75 x 0.60)

Angle 40x40x5mm
2x0.75 = 1.50 m
2x0.60 = 1.20 m
= 2.70 m @ 3.00 kg/m = 8.1 kg
Total = 8.51kg
255.30 kg.
Qty taken for cost using once.=
255.30x0.85/40 = 5.425 kg
Welding length = (30x32)/40=24 cm
1215 Welding by electric plant 2.00 cm

8659 Water proof ply 12 mm thick 525.00 sqm
1x4.50x3.00=13.50sqm
Add wastage @ 5% =0.68sqm
Total 14.18sqm
Qty taken for cost using once 14.18/8 =
1.77sqm


0.10625

0.1275
9999 Assembly nut & bolts etc. 2.12 L.S.

LABOUR
TOTAL
i.e. on (8704.2 - 467.09) = 8237.11
TOTAL
467.09) = 8319.48 x 0.1405
TOTAL
- 467.09) = 9488.37
TOTAL
i.e. on (11378.72 - 467.09) = 10911.63
Cost for 13.50 sqm.

Cost per sqm.
Say
5.9.21 for
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water
proof ply 12 mm thick
Details of cost for a beam of 6 m clear span,
0.50 m deep 0.30 m wide and height 3.5 m
from floor
Cubical contents
6.60x0.5x0.3 = 0.99 cum
1x1.30x6.00 = 7.80 sqm
MATERIAL

material

Steel plates for side and bottom (plate size

1.20 x 0.50m)
Angle 40x40x5mm (both sides) & bottom
2x(2x1.20) = 4.80 +(2x1.2) =7.20m
2x(3x0.50)=3.00+(3x0.30)=3.9m
11.10 m @ 3.00 kg/m =33.30 kg
Weight of one plate = 11.70 kg.
Add for wastage =1.67kg.
Total =34.97 kg.

Total weight of all plates
5x34.97 = 174.85 kg
Qty taken for cost of using once
=174.85x0.85/40 =3.72 kg
Welding length 480/40= 12 cm
1215 Welding by electric plant 2.00 cm

8659 Water proof ply 12 mm thick 525.00 sqm
1x1.30x6.00 = 7.80 sqm

Add 5% wastage = 0.39 sqm
Total = 8.19 sqm
Qty taken for cost of using once 8.19/8
sqm= 1.02 sqm

Qty taken for cost of using once = 6

x0.85/40 =0.1275 m
7344 Beam clamp 300-380 mm (450-1070 mm) 355.00 each

set
= 0.1063m
9999 Assembly nut & bolts etc. 2.12 L.S.

LABOUR
9999 Sundries, paper tape etc. 2.12 L.S.
TOTAL
i.e. on (4139.18 - 320.29) = 3818.89
TOTAL
320.29) = 3857.08 x 0.1405
TOTAL
- 320.29) = 4399
TOTAL
i.e. on (5379.14 - 320.29) = 5058.85
Cost for 7.80 sqm.

Cost per sqm.
Say
5.16.1 5.10 Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering
complete
5.10.1 12 mm dia.as&per
100the
mmdirection
length of Engineer-in-charge.
Details of cost for wall length 7.90mx1m (24
set)
MATERIAL
7320 Tie bolt 12 mm dia 100 mm length 38.00 each
7324 Spring coil 12 mm 15.00 each

7325 Plastic cone 12 mm dia 15.00 each
9977 Carriage: 2.12 L.S.
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 24 sets
Cost of 1 each set
Say
complete
5.10.2 12 mm dia.as&per
150the
mmdirection
set)
MATERIAL

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 24 sets
Cost of 1 each set
Say
complete as per the direction of Engineer-in-charge.
5.10.3 20 mm dia. & 150 mm length
set)
MATERIAL

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 24 sets
Cost of 1 each set
Say
complete
5.10.4 20 mm dia.&as per
225 the
mmdirection
set)
MATERIAL

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 24 sets
Cost of 1 each set
Say
5.17.1 5.11 Extra for additional height in centering, shuttering where ever required with
adequate bracing,
5.11.1 Suspended floors, propping etc., including
roofs, landing, beams andcost of de-shuttering
balconies and
(Plan area to decentering
be
measured)
Details of cost for a Room of size 6mx4.8m =
28.8 sqm.
MATERIAL
Assuming that shuttering material will
become unserviceable after use 40 times

@ 25% of cost material
Add 10% of cost of material for maintenance
7345 Prop 4 m 910.00 each

Qty taken for cost using once = 21 x0.85/40
= 0.4463
Deduct the rate of 3m prop

0.4463

Bracing
MS tube 40mm
7x4.8m = 33.60m
3x6.0m = 18.00m
Total = 51.60m
Qty taken for cost using once = 51.6x0.85/40
= 1.0965
7346 Double coupler 46.00 each

(40x40)
Qty taken for cost using once = 21 x0.85/40
= 0.4463

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 28.8 sqm.
Cost per sqm.
Say
5.18 5.12 Providing, hcisting and fixing above plinth level up to floor five level precast
reinforced cement concrete work in string courses,
Code Description bands,Unit
Rate copings, bed plates,
MATERIAL
Cement concrete 1:1½:3 in string or lacing
course etc

SH:CONCRETE WORK
(NB : Rate has been taken including cost of
fixing in CM 1:2 as precast members are to
be fixesd in CM 1:2)(1 cement : 2 coarse
sand) as per CPWD specifications)
LABOUR
Extra labour for laying CC in RCC work

0128 Mate 714.00 Day

TOTAL
i.e. on (9554.98 - 9259.2) =
295.780000000001
TOTAL
9259.2) = 298.740000000001 x 0.1405
TOTAL
- 9259.2) = 340.709999999999
TOTAL
i.e. on (9651.02 - 9259.2) = 391.82
Cost for 1 cum.

Say
5.19 5.12A Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete work in string courses,
Code Description bands, copings,
Rate Unit bed plates,
MATERIAL
Cement concrete 1:1½:3 in string or lacing
course etc

Work
(NB : Rate has been taken including cost of

fixing in CM 1:2 as precast members are to
be fixesd in CM 1:2)(1 cement : 2 coarse
sand) as per CPWD specifications)
LABOUR
Extra labour for laying CC in RCC work

0128 Mate 714.00 Day

TOTAL
i.e. on (9327.73 - 9031.95) =
295.780000000001
TOTAL
9031.95) = 298.740000000001 x 0.1405
TOTAL
- 9031.95) = 340.709999999999
TOTAL
i.e. on (9423.77 - 9031.95) = 391.82
Cost for 1 cum.

Say
5.20 5.13 Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in small lintels not exceeding 1.5m clear Rate
Code Description span up to floor five level,
Unit
Details of cost for a lintel :
Qty = 0.054 cum

MATERIAL
1.5m clear span = 1.8x0.20x0.15 = 0.054
cum.
Cement Concrete 1:1½:3

SH:CONCRETE WORK
Centring and shuttering

4.3.1 Rate as per item no. 4.3.1 of SH: Concrete 307.95 sqm
work
LABOUR
0128 Mate 714.00 Day

TOTAL
i.e. on (728.43 - 713.63) = 14.8
TOTAL
713.63) = 14.95 x 0.1405
TOTAL
713.63) = 17.05
TOTAL
i.e. on (733.24 - 713.63) =
19.6099999999999
Cost for 0.054 cum.

Cost per cum
Say
5.21 5.13a Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in small lintels not exceeding 1.5 m clearRate
Code Description span up Unit
to floor five level,
Details of cost for a lintel :
Qty = 0.054 cum

MATERIAL
1.5m clear span = 1.8x0.20x0.15 = 0.054
cum.
Cement Concrete 1:1½:3

Work

4.3.1 Rate as per item no. 4.3.1 of SH: Concrete 307.95 sqm
work
LABOUR
0128 Mate 714.00 Day

TOTAL
i.e. on (716.09 - 701.29) = 14.8
TOTAL
701.29) = 14.95 x 0.1405
TOTAL
701.29) = 17.05
TOTAL
i.e. on (720.9 - 701.29) = 19.6099999999999
Cost for 0.054 cum.

Cost per cum
Say
5.22 5.14 Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in mouldings as in cornices,
Code Description Rate windows
Unit sills etc,
Details of cost for
1mx0.20x0.15=0.03 cum
MATERIAL
SH:CONCRETE WORK
Extra labour for lifting

0.45 x 0.03 x 2.5 = 0.034
9999 Mortar and labour for hoisting and for fixing 2.12 L.S.
4.3.1 Rate as per Item No.4.3.1 of SH:Concrete 307.95 sqm
Work
9999 Add for extra labour for hoisting 2.12 L.S.
53.82x0.03 = 1.61
LABOUR
Add Extra labour for moulding :
0.58x0.03
0.58x0.03
1.5x0.03
0.06x0.03
Extra labour for laying CC in RCC

0.1x0.03
0.2x0.03
0.04x0.03
0.04x0.03
0128 Mate 714.00 Day
0.04x0.03 = 0.0012
TOTAL
i.e. on (440.76 - 344.37) = 96.39
TOTAL
344.37) = 97.35 x 0.1405
TOTAL
344.37) = 111.03
TOTAL
i.e. on (472.05 - 344.37) = 127.68
Cost for 0.03 cum

Cost for 1 cum.
Say
5.23 5.14a Providing, hoisting and fixing above plinth level up to floor five level precast
reinforced cement concrete in moulding as in cornices,
Code Description Rate windows
Unit sills etc.
Details of cost for
1mx0.20x0.15=0.03 cum
MATERIAL
Work
Extra labour for lifting

0.45 x 0.03 x 2.5 = 0.034
9999 Mortar and labour for hoisting and for fixing 2.12 L.S.

4.3.1 Rate as per Item No.4.3.1 of SH:Concrete 307.95 sqm
Work
9999 Add for extra labour for hoisting 2.12 L.S.
53.82x0.03 = 1.61
LABOUR
Add Extra labour for moulding :
0.58x0.03
0.58x0.03
1.5x0.03
0.06x0.03
Extra labour for laying CC in RCC

0.1x0.03
0.2x0.03
0.04x0.03
0.04x0.03
0128 Mate 714.00 Day
0.04x0.03 = 0.0012
TOTAL
i.e. on (433.9 - 337.51) = 96.39
TOTAL
337.51) = 97.35 x 0.1405
TOTAL
337.51) = 111.03
TOTAL
i.e. on (465.19 - 337.51) = 127.68
Cost for 0.03 cum

Cost for 1 cum.
Say
reinforced cement concrete in lintels, beams andRate
Code Description bressumers,
Unit including setting
Details of cost for beam 6.60m long 0.50m
deep and 0.30m wide = 6.60x0.50x0.30 =
0.99 cum.
MATERIAL
SH:CONCRETE WORK

4.3.1 Rate same as per item no. 4.3.1 Of SH: 307.95 sqm
Concrete work

level
LABOUR
Extra labour for layin cement concrete in
RCC work

0.10x0.99
0.20x0.99
0.04x0.99
0.04x0.99
0128 Mate 714.00 Day
0.04x0.99
9999 Cement mortar 1:3 for fixing 2.12 L.S.
9999 Labour for hoisting, Transporting and setting 2.12 L.S.

in position
TOTAL
i.e. on (11600.14 - 9830.72) = 1769.42
TOTAL
9830.72) = 1787.11 x 0.1405
TOTAL
(11868.92 - 9830.72) = 2038.2
TOTAL
i.e. on (12174.65 - 9830.72) = 2343.93
Cost for 0.99 cum

Cost for 1 cum.
Say
5.25 5.15a Providing, hoisting and fixing above plinth level up to floo five level precast
reinforced cement concrete in lintels, beams and bressumers
Code Description Rate Unitincluding setting in
Details of cost for beam 6.60m long 0.50m
deep and 0.30m wide = 6.60x0.50x0.30 =
0.99 cum.
MATERIAL
Work
4.3.1 Rate same as per item no. 4.3.1 Of SH: 307.95 sqm
Concrete work

level
LABOUR
Extra labour for layin cement concrete in
RCC work

0.10x0.99
0.20x0.99
0.04x0.99
0.04x0.99
0128 Mate 714.00 Day
0.04x0.99

in position
TOTAL
i.e. on (11373.78 - 9604.36) = 1769.42
TOTAL
9604.36) = 1787.11 x 0.1405
TOTAL
(11642.56 - 9604.36) = 2038.2
TOTAL
i.e. on (11948.29 - 9604.36) = 2343.93
Cost for 0.99 cum

Cost for 1 cum.
Say
reinforced cement concrete in shelves, including setting
Code Description Rate in Unit
cement mortar 1:3
Details of cost for on shelf
0.90x0.45x0.04m thick
= 0.90x0.45x0.04m = 0.0162 cum

SH:CONCRETE WORK
Finishing
13.18 Rate same as per iem no. 13.18 of SH : 67.80 sqm
Finishing
Centring and shuttering:
4.3.1 Rate same as per item no. 4.3.1 of SH : 307.95 sqm
concrete work
2x(0.90+0.45)x0.04 = 0.108 sqm

level
LABOUR
Extra labour for laying cement concrete in
RCC work due to delay etc.

0128 Mate 714.00 Day


in position
TOTAL
i.e. on (276.35 - 212.78) = 63.57
TOTAL
212.78) = 64.21 x 0.1405
TOTAL
212.78) = 73.23
TOTAL
i.e. on (296.99 - 212.78) = 84.21
Cost for 0.0162 cum

Cost for 1 cum.
Say
reinforced cement concrete in shelves including setting
Code Description Rate in cement
Unit mortar 1:3 (1
Details of cost for on shelf
0.90x0.45x0.04m thick
= 0.90x0.45x0.04m = 0.0162 cum

Work
Finishing
13.18 Rate same as per iem no. 13.18 of SH : 67.80 sqm
Finishing
Centring and shuttering:
4.3.1 Rate same as per item no. 4.3.1 of SH : 307.95 sqm
concrete work
2x(0.90+0.45)x0.04 = 0.108 sqm

level
LABOUR

0128 Mate 714.00 Day


in position
TOTAL
i.e. on (272.64 - 209.07) = 63.57
TOTAL
209.07) = 64.21 x 0.1405
TOTAL
209.07) = 73.23
TOTAL
i.e. on (293.28 - 209.07) = 84.21
Cost for 0.0162 cum

Cost for 1 cum.
Say
reinforced cement concrete in vertical & horizontal
Code Description fins, individually
Rate Unit or forming
Details of cost for 4 RCC vertical fins 4m
high at 1m centre to centre with two
horizontal fins, all projecting 60cm from face
of wall and 5cm thick cubical contents = 0.66
cum.
MATERIAL
SH:CONCRETE WORK

4.3.1 Rate as per item no. 4.3.1 Concrete work 307.95 sqm

level
LABOUR

0128 Mate 714.00 Day


in position

TOTAL
i.e. on (6832.75 - 5925.59) = 907.16
TOTAL
5925.59) = 916.23 x 0.1405
TOTAL
- 5925.59) = 1044.96
TOTAL
i.e. on (7127.29 - 5925.59) = 1201.7
Cost for 0.66 cum

Cost for 1 cum.
Say
reinforced cement concrete in vertical & horizontal
Code Description fins individually
Rate Unit or forming
Details of cost for 4 RCC vertical fins 4m
high at 1m centre to centre with two
horizontal fins, all projecting 60cm from face
of wall and 5cm thick cubical contents = 0.66
cum.
MATERIAL
Work

4.3.1 Rate as per item no. 4.3.1 Concrete work 307.95 sqm

level
LABOUR

0128 Mate 714.00 Day


in position

TOTAL
i.e. on (6681.84 - 5774.68) = 907.16
TOTAL
5774.68) = 916.23 x 0.1405
TOTAL
- 5774.68) = 1044.96
TOTAL
i.e. on (6976.38 - 5774.68) = 1201.7
Cost for 0.66 cum

Cost for 1 cum.
Say
5.30.1 5.18 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (zone-
III) mm
5.18.1 50 : 4 graded
thick stone aggregate 6mm nominal size), reinforced with 1.6 mm dia
Details of cost for jali
2.00mx0.75m = 1.50 sqm. of jali-
0768 Cement Concrete Jali 50 mm thick 400.00 sqm
9999 Mortar for fixing 2.12 L.S.

9988 Carriage and sundries 2.12 L.S.
LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1.50 sqm.
Cost of 1 sqm.
Say
III) mm
5.18.2 40 : 4 graded
Details of cost for 1.2mx0.60m = 0.72 sqm.

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 0.72 sqm.
Cost of 1 sqm.
Say
III) mm
5.18.3 25 : 4 graded
Details of cost for jali 0.75mx0.5m = 0.375
sqm of jali

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 0.375 cum
Cost of 1 sqm.
Say
5.31 5.19 Encasing rolled steel sections, in beams and columns, with cement concrete
1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived
Unit sources : 3
Consider 2 R.S. Joist (150mmx80mm) 4.88m

long placed 30cm apart centre to centre
Overall dimensions of the beam

43cmx20cm-
MATERIAL
Concrete work-
4.93x0.43x0.20 = 0.424 cum
For 1:1½:3 Cement Concrete (1 cement: 1½

coarse sand : 3 stone aggregate 20mm
nominal size)

SH:CONCRETE WORK
Extra labour for laying C.C. in RCC work

0128 Mate 714.00 Day

Form work-
4.93x0.83 girth = 4.09 sqm.
5.9.5 Rate as per item 5.9.5 of SH: Reinforced 602.60 sqm

cement concrete work
9999 Sundries and for lifting materials 2.12 L.S.
TOTAL
i.e. on (5936.06 - 5764.92) = 171.14
TOTAL
5764.92) = 172.85 x 0.1405
TOTAL
- 5764.92) = 197.14
TOTAL
i.e. on (5991.63 - 5764.92) = 226.71
Cost of 0.424 cum

Cost of 1 sqm.
Say
5.32 5.19a Encasing rolled steel sections, in beams and columns, with cement concrete
1:1.5:3 (1 cement : 1.5 coarse sand including manufactured
Code Description Rate Unit sand derived
Consider 2 R.S. Joist (150mmx80mm) 4.88m

long placed 30cm apart centre to centre
Overall dimensions of the beam 43cm x

20cm-
MATERIAL
Concrete work-
4.93x0.43x0.20 = 0.424 cum
For 1:1½:3 Cement Concrete (1 cement: 1½

coarse sand : 3 stone aggregate 20mm
nominal size)

Work

0128 Mate 714.00 Day

Form work-
4.93x0.83 girth = 4.09 sqm.

9999 Sundries and for lifting materials 2.12 L.S.
TOTAL
i.e. on (5839.11 - 5667.97) = 171.14
TOTAL
5667.97) = 172.85 x 0.1405
TOTAL
- 5667.97) = 197.14
TOTAL
i.e. on (5894.68 - 5667.97) = 226.71
Cost of 0.424 cum

Cost of 1 sqm.
Say
5.33 5.20 Encasing rolled steel section in grillages with cement concrete 1:1.5:3 (1
cement 1.5 coarse sand (zone- III) derived from natural
Code Description Rate sources
Details of cost for the grillage
3.50mx3.50mx1.00m

3.50mx3.50x1.00 = 12.25cum

SH:CONCRETE WORK

0128 Mate 714.00 Day

Shuttering :
2(3.50+3.50)x1.00= 14.00 sqm

TOTAL
i.e. on (107410.04 - 103786.73) = 3623.31
TOTAL
103786.73) = 3659.54 x 0.1405
TOTAL
(107960.44 - 103786.73) =
4173.70999999999
TOTAL
i.e. on (108586.5 - 103786.73) =
4799.76999999999
Cost of 12.25 cum.

Cost of 1 cum.
Say
5.34 5.20a Encasing rolled steel section in grillages with cement concrete 1:1.5:3 (1
cement : 1.5 coarse sand including manufacturedRate
Code Description sand derived
Unit from
Details of cost for the grillage
3.50mx3.50mx1.00m

3.50mx3.50x1.00 = 12.25cum

Work

0128 Mate 714.00 Day

Shuttering :
2(3.50+3.50)x1.00= 14.00 sqm

TOTAL
i.e. on (104609.07 - 100985.76) = 3623.31
TOTAL
100985.76) = 3659.54 x 0.1405
TOTAL
(105159.47 - 100985.76) =
4173.70999999999
TOTAL
i.e. on (105785.53 - 100985.76) =
4799.76999999999
Cost of 12.25 cum.

Cost of 1 cum.
Say
5.35 5.21 Extra for providing and fixing expanded metal mesh of size 20x60 mm and
strands 3.25 mm wide 1.6 mm thick weighing 3.64 Rate
Code Description kg per sqm
Unitfor encasing of
Deatail of cost for 10 sqm
MATERIAL
Expended metal 20 mm x 60 mm and 1.6
mm thick = 10 sqm
Wastage 5% = 0.5 sqm

Total =10.50 sqm
1015 Mild steel expanded metal 20x60 mm 280.00 sqm
strands
9977 Carriage of expended metal 2.12 L.S.
9999 Wire for tieing 2.12 L.S.

Cost of bending and placing in position
0102 Blacksmith 1st class 784.00 Day

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 sqm
Cost of 1 sqm.
Say
5.36.1 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing
5.22.1 Mild in and
steel position and Tensile
Medium bindingsteel
all complete
bars upto plinth level.
Details of cost for 1 quintal-
MATERIAL
Mild steel bars = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05 q
1004 Average rate of Mild steel round bars for 4850.00 quintal
reinforcements
Carriage of steel 1.05/10 = 0.105t
2205 Carriage of Steel 145.72 tonne

9999 Cover block 2.12 L.S.
LABOUR
For straightening, cutting, bending, binding
and placing in position-

9999 Sundries and binding wire 2.12 L.S.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing
5.22.2 Hard in position
drawn and binding all complete upto plinth level.
steel wire
MATERIAL
Hard drawn steel wire = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05 q
1224 Hard drawn steel wire 4800.00 quintal
Carriage 1.05q = 0.105 tonne

LABOUR
For cutting and laying in position etc.-

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing
5.22.3 Cold in position
twisted bars and binding all complete upto plinth level.
MATERIAL
Deformed twisted steel bars = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05q
1005 Twisted steel/ deformed TMT bars Fe-500D 4900.00 quintal

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing
5.22.4 Hot in position
rolled deformedand binding all complete upto plinth level.
bars
MATERIAL
Wastage 5% = 0.05 q
Total = 1.05q

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing
5.22.5 Hard in position
drawn andfabric
steel wire binding all complete upto plinth level.
MATERIAL
Hard drawn steel wire fabric 100kg , 7.75kg
per sqm = 12.903 sqm.
Total =13.548 sqm

1021 Hard drawn steel wire fabric 430.00 sqm
Carriage 1.05q = 0.105 tonne

LABOUR
For cutting and laying in position.

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing in position andTreated
5.22.6 Thermo-Mechanically bindingbars
all complete upto plinth
of grade Fe-500D level.
or more.
MATERIAL
Wastage 5% = 0.05 q
Total =1.05q

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.37.1 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing
5.22A.1 Mild in and
steel position and Tensile
Medium bindingsteel
all complete
bars above plinth level.
MATERIAL
Mild steel bars = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05 q
1004 Average rate of Mild steel round bars for 4850.00 quintal
reinforcements

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing
5.22A.2 Hard in position
drawn and binding all complete above plinth level.
steel wire
MATERIAL
Hard drawn steel wire = 1.00 q
Wastage 5% = 0.05 q
Total = 1.05 q
1224 Hard drawn steel wire 4800.00 quintal

LABOUR
For cutting and laying in position etc.-

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing
5.22A.3 Cold in position
twisted bars and binding all complete above plinth level.
MATERIAL
Wastage 5% = 0.05 q
Total = 1.05q

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing
5.22A.4 Hot in position
rolled deformedand binding all complete above plinth level.
bars
MATERIAL
Wastage 5% = 0.05 q
Total = 1.05q

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing
5.22A.5 Hard in position
drawn andfabric
steel wire binding all complete above plinth level.
MATERIAL
Hard drawn steel wire fabric 100kg , 7.75kg
per sqm = 12.903 sqm.
Total =13.548 sqm

1021 Hard drawn steel wire fabric 430.00 sqm

LABOUR
For cutting and laying in position.

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
placing in position andTreated
5.22A.6 Thermo-Mechanically bindingbars
all complete above plinth
of grade Fe-500D level.
or more.
MATERIAL
Wastage 5% = 0.05 q
Total =1.05q

LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 Kg.
Say
5.38.1 5.22B Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of
approved make from factory/workshop
5.22B.1 Thermo-Mechanically to construction
Treated bars of grade Fe-500D or site
more.including placing in
Details of cost for 1 quintal
MATERIAL
2205 Carriage of Steel 1.0/10 = 0.1 t 145.72 tonne

LABOUR
9999 For cut and bend 2.12 L.S.
For binding and placing in position
0102 Blacksmith 1st class 784.00 day

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 kg
Say
5.39.1 5.22C Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of
approved make from factory/workshop
5.22C.1 Thermo-Mechanically to construction
Treated bars of grade Fe-500D or site
more.including placing in
MATERIAL
2205 Carriage of Steel 1.0/10 = 0.1 t 145.72 tonne

LABOUR
9999 For cut and bend 2.12 L.S.
For binding and placing in position
0102 Blacksmith 1st class 784.00 day

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of one quintal
Cost of 1 kg
Say
5.40 5.23 Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement
mortar 1:3 (1 Cement : 3 fine sand).
MATERIAL
Cement mortar 1 : 3 (1 cement : 3 fine sand)
3.3 Rate as per item No 3.3 of SH: Mortars 4382.15 cum

9999 Extra for removing burrs, cleaning with wire 2.12 L.S.
brushes pock marking with pointed tool etc.
complete
9999 Scaffolding and Sundries 2.12 L.S.

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 Sqm.
Cost per sqm.
Say
5.41 5.24 Extra for rendering smooth the top of suspended floors, landings and staircases
(treads and risers) with cement mortar 1:2 (1 cement
Code Description Rate: 2 coarse
Unit sand), including a
MATERIAL
Cement mortar 1:2 (1 Cement : 2 Coarse
sand)
3.7 Rate as per item No 3.7 of SH: Mortars 5699.25 cum
Finishing (floating coat) with

LABOUR

9999 Spreading earth on floor (7.5mm thick) 2.12 L.S.
Spreading sand 15mm thick on floor

9999 Disposal of earth spread over floor 2.12 L.S.

protectIron
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10 Sqm.
Cost per sqm.
Say
5.42 5.25 Providing and fixing in position copper plate as per design for expansion joints.
Details of cost for 10.56 kg Considering 3.0
m length, width 250mm and 1.6 mm thick =
0.750 sqm copper plate.
Weight of copper plate @ 14.08 kg/m2
10.56kg
0967 Copper plate 527.00 kilogra
m
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 10.56 kg
Cost per kg.
Say
5.43 5.26 Providing and filling in position, blown bitumen in expansion joints.
Details of cost for a joint of 300m length
2.5cm width and 15cm depth = 1.125 cum
Cubical content of joint-

300x0.025x0.150=1.125 cum.
MATERIAL
Bitumen 85/25 @ 1050kg per cum.
1.25x1050kg = 1181.25kg
Add wastage @ 5% = 59.06 kg.
= 1240.31 = 1.240 tonne

0313 Blown type petroleum bitumen of penetration 34790.00 tonne
85/25 of approved quality

For heating of bitumen @ 2.0 quintal per
tonne of bitumen.
1.240x2.0=2.48q=0.248t
2200 Carriage of steam coal 187.00 tonne

LABOUR
Labour for heating, mixing and filling-

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1.125 cum
Cost of 1.00 cum
Say
5.44 5.27 Providing and filling in position bitumen mix filler of proportion 80 kg. of hot
bitumen, 1 kg. of cement and 0.25 cubic metre of coarse
Code Description Rate sandUnitfor expansion
Details of cost for a joint of 300m length
2.5cm width and 15cm depth = 1.125 cum
Cubical content of joints-

300x0.150x0.025=1.125cum.
MATERIAL
Bitumen S-90 = 256.30 kg per cum.
256.30x1.125 = 288.34 kg.

Add for wastage @ 5% = 14.42 kg.
Total = 302.76 kg. or = 0.303 tonne.
0309 Paving bitumen VG-10 of approved quality 25614.00 tonne

for heating of bitumen @ 2.0 quintal

pertonne of bitumen, i.e.
0.303x2.0=0.606q
2200 Carriage of steam coal 187.00 tonne

1/80x228.34=3.6 kg = 0.0036 Tonne

1/4th of the quantity of cement in kg = 3.6/4=
0.90 cum

LABOUR
Labour for heating and filling :

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 1.125 cum
Cost of 1.00 cum
Say
5.45 5.28 Providing and fixing in position 12mm thick bitumen impregnated fiber board
conforming to IS: 1838, including cost of primer, sealing
Code Description Rate compound
Unit Grade-A in
Details of cost for for joint 100m long 10cm
deep = 10 sqm
MATERIAL
(i) Impregnated fibre board
1x100x0.075=7.5sqm
0339 Flame retardent face insulating, Impregnated 375.00 sqm

fibre board 12 mm thick
(ii) Primere 80m/litter 100m=100/80 x1=1.25

lit
0316 Bitumen solution primer of approved quality 47.00 litre
(iii) Sealing compound @ 3 m per litre

for100m = 100/3x1 =33.3 litres
Wastage @ 5% = 1.67
Total = 35.00 litre
(1 litre = 0.9 kg) = 35.00x0.9 = 31.5 kg
0314 Bitumen hot sealing compound : grade A 29.00 kilogra

m
9977 Carriage 2.12 L.S.
LABOUR

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 100m long 10cm deep
Cost per cm depth per 100m
Say
5.46.1.1 5.29 Providing and fixing sheet covering over expansion joints with iron screws as
per design.
5.29.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862.
5.29.1.1 150mm wide
Details of cost for 3m length
MATERIAL
0236 Multi purpose fibre (high impact poly 210.00 sqm
propelene reinforced) cement board 6 mm
thick
2273 Carriage of A.C.sheet and accessories 145.72 tonne
0.45sqm = 0.0049 tonne

9999 50mm iron screws with washer and rawl 2.12 L.S.
plugs
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 3m
Cost per meter
Say
per design.
5.29.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862.
5.29.1.2 200mm wide
MATERIAL
0236 Non - Asbestos multi purpose fibre (high 210.00 sqm
impact poly propelene reinforced) cement
board 6mm thick.
0.60sqm. = 0.0065 tonne

plugs
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 3m
Cost per meter
Say
per design. fluted strips 3.15 mm thick.
5.29.2 Aluminium
5.29.2.1 150 mm wide
Details of cost for 1 meter
MATERIAL
2391 Strips-Aluminium fluted 3.15mm thick and 286.00 metre
150mm wide
0639 Bright finished or black enamelled mild steel 40.00 100 Nos
screws 25 mm
9977 Carriage of materials 2.12 L.S.

LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1 metre
Say
per design. fluted strips 3.15 mm thick.
5.29.2 Aluminium
5.29.2.2 200 mm wide
MATERIAL
2392 Strips Aluminium fluted 3.15mm thick and 381.00 Metre
200mm wide metre
0639 Bright finished or black enamelled mild steel 40.00 100 Nos
screws 25 mm
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1 metre
Say
per design.
5.29.3 Cement bonded wood particle board 6mm thick as per IS : 14276
5.29.3.1 150 mm wide
MATERIAL
0242 6 mm thick multi purpose cement bonded 195.00 sqm
wood particle board
2273 Carriage of board and accessories 145.72 tonne
0.45sqm = 0.0049 tonne

plugs
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 3 metre
Cost for 1 metre
Say
per design.
5.29.3 Cement bonded wood particle board 6mm thick as per IS : 14276
5.29.3.2 200 mm wide
MATERIAL
0242 6 mm thick multi purpose cement bonded 195.00 sqm
wood particle board
2273 Carriage of board and accessories 145.72 tonne
0.60sqm = 0.0060 tonne

plugs
LABOUR
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 3 metre
Cost for 1 metre
Say
5.47 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.
projections.
Details of cost for 30 metre long throating or
plaster or moulding-
LABOUR

9999 Add for materials (cement mortar etc.) 2.12 L.S.
TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 30 metre
Cost per meter
Say
5.48 5.31 Extra for laying reinforced cement concrete in or under water and/ or liquid mud,
including cost of pumping or bailing out water andRate
Code Description removing slush etc.,
Unit
Details of cost for depth of water 0.30m.
Analysis same as per item number 4.15
pumping hours = 3 hrs. or 0.375 day.

0011 Hire charges of Pumpset of capacity 4000 700.00 Day
litres/hour.
for cleaning slush

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost of 14cum. per 0.30m depth

Say
5.49 5.32 Extra for laying reinforced cement concrete in or under foul positions.
ANALYSIS SAME AS ITEM NO 4.16

TOTAL
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost for 1 cum.
Say
concrete
5.33.1 All worksfor reinforced
upto cement concrete work; using coarse aggregate and fine
plinth level
5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg/cum
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.

etc.
LABOUR

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
plinth level
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.

etc.
LABOUR


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
plinth level
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.

etc.
LABOUR


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
plinth level
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.

etc.
LABOUR


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
plinth level
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.

etc.
LABOUR


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
upto work; using coarse aggregate and fine
floor V level
MATERIAL
nominal size
nominal size

nominal size


m
0.50% of cement

plant.

etc.


level : = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
floor V level
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.

etc.


level : = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
floor V level
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.

etc.


level : = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
floor V level
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.

etc.


level : = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
above cement
floor V level
MATERIAL
nominal size

nominal size

nominal size


m
0.50% of cement

plant.
etc.


level : = 0.75 x 2.5 = 1.88)

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
5.51.1 5.33A Providing and laying in position ready mixed or site batched design mix cement
concrete
5.33A.1 All for reinforced
work upto cement concrete work; using coarse aggregate and fine
plinth level
MATERIAL

nominal size

nominal size

40 mm nominal size
sources



m
0.50% of cement

plant.

etc.
LABOUR


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
work upto cement concrete work; using coarse aggregate and fine
plinth level
MATERIAL

nominal size


nominal size

40 mm nominal size
sources


m
0.50% of cement

plant.

etc.
LABOUR


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
5.33A.1.1 Concrete of M25 grade with minimum cement content of 330 kg/cum
MATERIAL

nominal size


nominal size

40 mm nominal size
sources



m
0.50% of cement

plant.
etc.
LABOUR


Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
5.51.2 5.33A Providing and laying in position ready mixed or site batched design mix cement
concrete
work above cement
plinth level upto concrete work; using coarse aggregate and fine
floor V level
MATERIAL

nominal size

nominal size

40 mm nominal size
sources



m
0.50% of cement

plant.

etc.
LABOUR


Extra labour for lifting up to floor five level
0.75 x 2.5 = 1.88

Total
TOTAL
0.1405)
TOTAL
overheads
TOTAL
Cost per 1.00 cum
Say
concrete
work above cement
plinth level upto concrete work; using coarse aggregate and fine
floor V level
MATERIAL

nominal size


nominal size
2202 Carriage of Stone aggregate including Recyc 163.93 cum

982 Coarse sand (zone III) derived from natural s 1500 cum
276 Manufactured sand derived from Recycled Co 741 cum
367 Portland Cement (OPC-43 grade) 5000 tonne
7318 Plasticizer / super plasticizer 29 kilogra
0.50% of cement
Production cost, pumping to respective floors and laying in position
4 Production cost of concrete by batch mix plant 400 cum
9 Pumping charges of concrete including Hire c 210 cum
LABOUR
155 Mason (average) 749 Day
114 Beldar 645 Day
101 Bhisti 714 Day
12 Vibrator (Needle type 40 mm) 350 Day
0.75 x 2.5 = 1.88
115 Coolie 645 day
Total
TOTAL
Add 12% GST applicable on work contract, by reversible method (multip
TOTAL
Add 15 % for contractor's profit and overheads
TOTAL
Cost per 1.00 cum
Say
5.33A.2.1Concrete of M25 grade with minimum cement content of 330 kg/cum

MATERIAL
295 Stone Aggregate (Single size) : 20 mm nomina 1400 cum
272 Recycled Concrete Aggregate (RCA) 20 mm n 957 cum
270 Recycled Concrete Aggregate (RCA) 10 mm n 957 cum
2202 Carriage of Stone aggregate including Recyc 163.93 cum
982 Coarse sand (zone III) derived from natural s 1500 cum
276 Manufactured sand derived from Recycled Co 741 cum
0.50% of cement
Production cost, pumping to respective floors and laying in position
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
0.75 x 2.5 = 1.88
115 Coolie 645 day
Total
TOTAL
TOTAL
TOTAL
Cost per 1.00 cum
Say
5.52 5.35 Add for using extra cement in the items of design mix over and above the
Code specified cement content therein.
Description Rate Unit
TOTAL
TOTAL
TOTAL
TOTAL
Cost per quintal
Say
5.53 5.36 Providing and placing in position precast reinforced cement concrete waffle
Code units, square or rectangular, as per designRate
Description and shape for floors
Unit and roofs in
Consider a waffle 09. x 0.9 x 0.3m
Total area covered 4.548x3.636 = 16.54 sqm.
Cement concrete in 1 unit
Top 0.8x0.8x0.035 = 0.0224
Sides 2(0.8x0.265x0.0325) = 0.0138
2(0.735x0.265x0.0325) = 0.0127
Total = 0.0489
Flange 4x0.85x0.05x0.035 = 0.0060
Total = 0.0549
Add for Fillets 25% = 0.0137
Total = 0.069 cum.
Quantity for 20 such units = 1.38 cum.
5.2.2 Rate as per item no 5.2.2 of SH : RCC 10185.05 cum
(i) Shuttering and centring
Face in contact
4x0.8x0.265 = 0.848
Inner 4x0.735x0.265 = 0.779
Top (inside) 1x0.735x0.735 = 0.540
Flange 4x0.9x0.035 = 0.126
Total = 2.293 sqm.
Quantity 20 such units 45.86 sqm.
Hooks for lifting
2x1.5 = 3.0m
4x0.01 = 0.04m
Total = 3.04m
@ 3kg per m-9.12Kg or 0.009 t = 9 kg
10.2 Rate as per item no 10.2 of SH : Steel work 112.1 kg
9988 (iii) 10mm dia. Bolts 60mm long with nuts and 2.12 L.S.
(iv) Transportation and erection labour for 20 units
126 Mason (for ornamental stone work) 1st class 784 Day
114 Beldar 645 Day
(v) Cost of poining flush or deep ruled in cement mortar 1:2 (1 Cement
13.35.1 Rate as per item no 13.35.1 of SH : Finishing 177.85 sqm
TOTAL
Add 1 % for water charges on all except (A) i.e. on (36578 - 31726.95
TOTAL
Add 12% GST applicable on work contract, by reversible method (multipl
TOTAL
Add 15 % for contractor's profit and overheads on all except (A) i.e.
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (38153.09 - 31726.
Total for 20 units
Cost for 1.38 cum.
Cost for 1 cum.
Say
5.54 5.36a Providing and placing in position precast reinforced cement concrete waffle
units, square or rectangular as per design and shape for floors and roofs in
Consider a waffle 09. x 0.9 x 0.3m
Total area covered 4.548x3.636 = 16.54 sqm.
Cement concrete in 1 unit
Top 0.8x0.8x0.035 = 0.0224
Sides 2(0.8x0.265x0.0325) = 0.0138
2(0.735x0.265x0.0325) = 0.0127
Total = 0.0489
Flange 4x0.85x0.05x0.035 = 0.0060
Total = 0.0549
Add for Fillets 25% = 0.0137
Total = 0.069 cum.
Quantity for 20 such units = 1.38 cum.
5.2.2A Rate as per Item No.5.2.2A of SH:Reinforce 10001.7 Cum
(i) Shuttering and centring
Face in contact
4x0.8x0.265 = 0.848
Inner 4x0.735x0.265 = 0.779
Top (inside) 1x0.735x0.735 = 0.540
Flange 4x0.9x0.035 = 0.126
Total = 2.293 sqm.
Quantity 20 such units 45.86 sqm.
Hooks for lifting
2x1.5 = 3.0m
4x0.01 = 0.04m
Total = 3.04m
@ 3kg per m-9.12Kg or 0.009 t = 9 kg
9988 (iii) 10mm dia. Bolts 60mm long with nuts and 2.12 L.S.
(iv) Transportation and erection labour for 20 units
114 Beldar 645 Day
(v) Cost of poining flush or deep ruled in cement mortar 1:2 (1 Cement
TOTAL
Add 1 % for water charges on all except (A) i.e. on (36324.98 - 31473
TOTAL
TOTAL
TOTAL
Total for 20 units
Cost for 1.38 cum.
Cost for 1 cum.
Say
5.55 5.38 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or
Code part thereof.
MATERIAL
Total
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say
5.56.1 5.41 Supplying and applying pre tested and approved water based concrete curing
5.41.1 Noncompound to concrete/
pigmented masonry
wet curing surface, all as per manufacturer’s specification
compound
Detail of cost for 10.00 sqm (covering area 5 sqm/litre)
MATERIAL
349 Curing compound 38 litre
9977 Carriage of material 2.12 L.S.
LABOUR
131 Painter 714 day
114 Beldar 645 day
9999 Sundries, Brush 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
5.57.1 5.42 Providing and fixing parallel threaded couplers conforming to IS code on
“Reinforcement Couplers for Mechanical Splices of Bars for Concrete
5.42.1 Coupler for 16 mm diameter reinforcement bar
Detail of cost for 1 Nos
MATERIAL
2394 Coupler 16 mm dia 31 each
LABOUR
9999 For placing in position and fixing 2.12 L.S.
9999 Tapard/Parallel threading charges 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 no
Say
“Reinforcement
5.42.2 Coupler for 20 mm Couplers forreinforcement
diameter Mechanical Splices
bar of Bars for Concrete
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 no
Say
“Reinforcement
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 no
Say
“Reinforcement
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 no
Say
“Reinforcement
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 no
Say
5.58.1 5.43 Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as
5.43.1 200per design
mm wide. for expansion joints.
Detail of cost for 1 mtr
MATERIAL
2393 1 mm thick Stainless Steel Cover plate grade 286 kg
8647 Stainless steel screws 30 mm x4 mm 35.84 100 nos
LABOUR
103 Blacksmith 2nd class 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 mtr
Say
5.58.2 5.43 Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as
5.43.2 300per design
mm wide. for expansion joints.
Detail of cost for 1 mtr
MATERIAL
2393 1 mm thick Stainless Steel Cover plate grade 286 kg
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 mtr
Say
5.59.1 5.44 Providing and fixing of expansion joint system related with floor location as per
drawings
5.44.1 Floor Jointand direction
of 100 of Engineer-In-Charge. The joints system will be of
mm gap
Details of Cost of 1 metre.
MATERIALS :
2403 Floor Joint of 100 mm 3193 metre
2402 Epoxy adhesive 156 kg
LABOUR :
102 Blacksmith 1st class 784 Day
123 Mason (brick layer) 1st class 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
drawings
mm gap
MATERIALS :
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
drawings
mm gap
MATERIALS :
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
5.60.1 5.45 Providing and fixing of expansion joint system related with wall joint
(internal/external)
5.45.1 Wall Joint of 100 mmlocation
gap as per drawings and direction of Engineer-In- Charge.
MATERIALS :
2409 Wall Joint of 100 mm 2472 metre
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
(internal/external)
5.45.2 Wall Joint of 150 mmlocation
gap as per drawings and direction of Engineer-In- Charge.
MATERIALS :
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
(internal/external)
5.45.3 Wall location
Joint of 200 mm gap as per drawings and direction of Engineer-In- Charge.
MATERIALS :
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
5.61.1 5.46 Providing and fixing of expansion joint system of approved make and
manufactures
5.46.1 Roof for mm
Joint of 100 various
gap roof locations as per approved drawings and direction
MATERIALS :
2399 Complete Roof Joint of 100 mm 2912 metre
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
manufactures
5.46.2 Roof for mm
MATERIALS :
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
manufactures
5.46.3 Roof for mm
MATERIALS :
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre.
Say
5.62.1 5.47 Providing and fixing in position factory made precast RCC M-40 fixing with hold
fast embedded in 1:3:6 concrete block for doors and windows frames having
5.47.1 Door frame 125 mmx 60 mm
Details of cost for 5.20 metre.
MATERIAL
5.33.1.1 Rate as per Item No.5.33.1 of SH:REINF 8683.8 cum
Extra for scatter and smaller work @25 % = 0.039 + 0.00975 = 0.0487
5.34.3 Rate as per Item No.5.34.3 of SH:REINF 212.35 cum
1005 Twisted steel/ deformed TMT bars Fe-500D 4900 quintal
596 Bright finished or black enameled mild steel 56 10 Nos
4.3.3 Rate as per Item No.4.3.3 of SH:C O N C R E 804.25 sqm
14.2.1 Rate as per Item No.14.2.1 of SH:REPAIRS 1505.3 each
13.48.2 Rate as per Item No.13.48.2 of SH:F I N I S H 144.9 sqm
TOTAL
Add 1 % for water charges on all except (A) i.e. on (3467.4 - 2991.06)
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (3622.05 - 2991.0
Cost of 5.20 metre
Cost of 1 metre
Say
fast embedded
5.47.2 Door frame 100 in 1:3:6
mmx 60concrete
mm block for doors and windows frames having
MATERIAL
TOTAL
Add 1 % for water charges on all except (A) i.e. on (3209.92 - 2780.62
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (3349.31 - 2780.62)
Cost of 5.20 metre
Cost of 1 metre
Say
fast embedded
5.47.3 Door in 1:3:6mm
frame 85 mmx60 concrete block for doors and windows frames having
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.20 metre
Cost of 1 metre
Say
5.63.1 5.48 Providing and laying Reinforced cement concrete for construction of piers,
abutments, Cement
5.48.1 Reinforced portal frames, pier-M-50
Concrete caps and bearing pedestals and seismic arresters
Detail of cost for 120 cum.
MATERIAL
5.48X Sub Analysis no 5.48X (Annexure) for item 5.4 617187.95 each
Providing M 50 grade reinforced Cement Concrete data (lot) for 120.0
Add 11 per cent of cost of material, labour
and machinery for formwork
P x 11 /100 = 561929.40 x 11 /100
Add 1.4 per cent of cost of material, Labour

and machinery excluding formwork to cater
for extra lift
P x 1.4 /100 = 561929.40 x 1.4 /100
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 cum
Rate of 1 cum
Say
abutments, Cement
5.48.2 Reinforced portal frames, pier-M-60
Concrete caps and bearing pedestals and seismic arresters
MATERIAL
5.48Y Sub Analysis no 5.48Y (Annexure) for item 5. 702779.75 each
Providing M 60 grade reinforced Cement Concrete data (lot) for 120.0
Add 11 per cent of cost of material, labour

and machinery for formwork
P x 11 /100 = 561929.40 x 11 /100
Add 1.4 per cent of cost of material, Labour

and machinery excluding formwork to cater
for extra lift
P x 1.4 /100 = 561929.40 x 1.4 /100
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 cum
Rate of 1 cum
Say
abutments,
5.48.3 Extra portal
for using frames,
M-50/ M-60 pier
Gradecaps and bearing pedestals
Self-compacting and seismic arresters
Cement Concrete
MATERIAL
5.48.3X Sub Analysis no 5.48Z (Annexure) for sub ana 9483.75 each
TOTAL
Rate of 1 cum
Say
5.64 5.49 Constructing cast-in situ RCC diaphragm wall by providing and laying machine
Code batched, machine mixed, self compacting, Rate
Description ready mix reinforced
Unit cement
Analysis for 20x12=240 Sqmt area of diaphragm wall
Average depth 12 m
Thickness 0.60 m
Total Quantity 20 mx12 m x0.6 m= 144.00
cum
82 Excavation of Diaphragm wall by Mechanical 1500 sqm
Guide wall RCC 1:2:4

RCC 2x20x(0.45+1.5)x.15 = 11.70 cum
5.1.3 Rate as per Item No.5.1.3 of SH:REINFO 7945.65 cum
Reinforcement@ 70 kg/Cum for guide wall=

11.70x 70 kg/cum= 819 kg
5.22.6 Rate as per Item No.5.22.6 of SH:REINF 89.65 kilogra
Add for chipping/dismantling top 50 cm
contaminated concrete =20 x 0.50 x 0.60=
6.00 cum
RMC M-30 as per qty=144.00 cum
Add 10% extra for bulges etc. i.e. 14.40 cum
Total=144.00+6.00+14.40= 164.40 cum
Bentonite @6% of RCC qty

Total Qty= 164.4x06x1400/100= 13810 kg=
13.81 tonne
7183 Bentonite 2800 tonne
Add 10 %extra cement due to concreting

under
water
164.4x420x0.10=6.90 tonne
Add cement for grouting of wall using
nozzles
etc.- 240 sqm @ 0.10 quintal/sqm =2.40
tonne
25 Hire and running charges of light crane 3500 day
Reinforcement @220 kg/cum

164.4x220kg/cum=36168 kg
Extra reinforcement for hooks @ 5% of cage
1808.4 kg
Total=1808.4 kg=18.084 qtl
Extra for welding reinforcement cage
Reinforcement @ 200 C/C 2 x 101 x 61 =
6161
joints Welding for alternate joint say 50 %
joints 6161 cm
Rate as per Item No.10.22 of SH:S T E E L

10.22 W O R K 3.4 cm
9999 Labour for grouting diaphragm wall under press 2.12 L.S.
Add for use retarders / plasticizers for the

diaphragm wall concreting using trimme @
0.4 % cement qty = (164.4 x 420 x 0.4)/
100=276.1
8954 Stop end tubes for diaphragmwall 600 mm dia 4.5 sqm
8955 Driving end tubes for diaphragm wall 600 mm 72 sqm
26 Hire and running charges of bentonite pump 3000 day
Bentonite powder @ 6% of R.C.C. Qty=

(164.4
Cum x 0.06)=9.864 cum
9.864 cum x 1400 kg/cum = 13809.6 kg
Disposal of bentonite muck
Slurry / Muck vol. 49.32 cum
Disposal of bentonite muck
Slurry / Muck vol. 49.32 cum
Add excavated earth = 144.00 cum
Total= 144.00 + 49.32 = 193.32 cum
15.6 Rate as per Item No.15.60 of SH:DISMANT 219.3 cum
Disposal of Chipping / Dismantling of
contaminated concrete and guide wall etc.
with all
leads as per item no. 15.3 =
2x(20x0.50x0.60) +
15.00 cum = 20.40 cum
15.3 Rate as per Item No.15.3 of SH:DISMANTL 2928.1 cum
9999 Sundries (Extra for concreting by Trimme) 2.12 L.S.
9999 Sundries ( Design Charges) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (2486703.16 - 16
Cost of 144.0 cum
Rate of 1 cum
Say
6.1.1 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
6.1.1 designation
Cement 7.5 1:4
mortar in foundation
(1 cement :and plinth sand)
4 coarse in:
MATERIAL
2602 Common burnt clay F.P.S. (non modular) brick 4590 ### Nos
2201 Carriage of Bricks 437.15 ### Nos
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
3.9 Rate as per item No 3.9 of SH: Mortar 4355.2 cum
LABOUR
124 Mason (brick layer) 2nd class 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.1.2 designation
Cement 7.5 1:6
mortar in foundation
(1 cement :and plinth sand)
6 coarse in:
MATERIAL
Cement mortar 1 : 6 (1 cement : 6 coarse sand) (Rate as per item No 3
3.11 Rate as per Item No.3.11 of SH: Mortar 3686.3 cum
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.2.1 6.2 Brick work with common burnt clay modular bricks of class designation 7.5 in
6.2.1 foundation
Cement and 1:4
mortar plinth in:
(1 cement : 4 coarse sand)
MATERIAL
7900 Modular common burnt clay bricks of class de 3800 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.2.2 foundation
Cement and 1:6
Mortar plinth in:
(1 cement : 6 coarse sand).
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.3.1 6.3 Brick work with common burnt clay machine moulded perforated bricks of class
6.3.1 designation
With 12.5modular)
F.P.S.(non conforming to IS: 2222 in superstructure above plinth level up
bricks
MATERIAL
7901 Machine moulded perforated common burnt cla 4200 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour element required for lifting of materials (above floor two lev
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.3.2 6.3 Brick work with common burnt clay machine moulded perforated bricks of class
6.3.2 designation
With Modular12.5 conforming to IS: 2222 in superstructure above plinth level up
bricks
MATERIAL
7902 Machine moulded common burnt clay modular pe 4800 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.4.1 designation
Cement 7.5 1:4
mortar in superstructure above sand)
(1 cement : 4 coarse plinth level up to floor V level in all
MATERIAL
3.9 Rate as per Item Number 3.9 of SH: Mortars 4355.2 cum
LABOUR
Extra labour element required for lifting of

materials (above floor two level upto floor
five level)
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.4.2 designation
Cement 7.5 1:6
mortar in superstructure above sand)
(1 cement : 6 coarse plinth level up to floor V level in all
MATERIAL
Cement mortar 1 : 6
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.5 6.5 Extra for brick work / AAC block masonry / Tile brick masonry in superstructure
Code above floor V level, for each four floors or part
Description Ratethereof by mechanical
Unit means.
Details of cost for 5.3 cum per four floors .
37 Mobile crane 4500 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.3 Cum.
Cost for 1 cum
Say
6.6 6.6 Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep
Code and vent holes including use of cores and cost
Description Rate of providingUnit
and fixing bitumastic
MATERIAL
Mild steel 25mmx3mm section 30cm long
30 No. = 9 metres @ 0.6kg/m = 5.40 kg
1008 Flats upto 10 mm in thickness 4850 quintal
9999 Painting the steel Bitumen 2.12 L.S.
Extra labour for keeping cavity clear and fixing wall ties and delay caus
114 Beldar 645 Day
9999 Add for use of Core 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.7 6.7 Providing half brick masonry with common burnt clay F.P.S. (non modular)
Code bricks of class designation 7.5 in cement mortar
Description Rate 1:3 (1 CementUnit : 3 coarse sand)
MATERIAL
Half brick masonry 1:3 (Average)
1x10x0.27 = 2.7
6.12.1 Rate as per item No. 6.12.1 of SH: Brick Work 852 sqm
Bitumen felt type- 3 grade 1
1x10mx11.4m = 1.14 sqm.
Add for wastage and overlapping @ 5% = 0.06 sqm.
Total = 1.20 sqm
322 Bitumen felt :Type 3 grade 1 70 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
Add 15 % for contractor's profit and overheads on all except (A) i.e. o
TOTAL
Cost of 10 metre
Cost for 1 metre
Say
6.8 6.8 Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of
Code class designation 7.5 in cement mortar 1:3 Rate
Description (1 cement : 3 coarse
Unit sand) in
MATERIAL
Cement mortar 1:3
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Sundries and scaffolding 2.12 L.S.
Extra labour for lifting of material (above floor two level up to floor five l
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.9 6.9 Brick work in plain arches in superstructure above plinth level and upto floor five
Code level including centering and shuttering complete
Description Rate for span up
Unitto 6 metres with
MATERIAL
Cement mortar 1:3
Taking a semi circular arch 3.6m span,
3.6m long and 0.40m thick
Area of centering = 3.142 x 1.8 x 3.6 = 20.37

sqm.
Brick work in Arch = 3.142x2.00x0.4x3.6 =

9.05cum.
Area per cum = 20.37/9.05 = 2.25 sqm
5.9.9 Rate as per item no 5.9.9 of SH : Reinforced 1826.25 sqm
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
Add 1 % for water charges on all except (A) i.e. on (10713.13 - 3857.
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.1 6.1 Brick work in gauged arches in superstructure above plinth level and upto floor
Code five level in cement mortar 1:3 (1 cement : 3Rate
Description coarse sand) including
Unit centering
MATERIAL
Cement mortar 1:3
Centring and shuttering (Area same as in item No. 6.9)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.11 6.11 Extra for additional cost of centering for arches exceeding 6m span including all
Code shuttering, bolting, wedging and removal (Area
Description Rate of the soffit Unit
to be measured).
MATERIAL
Centering and shuttering for arches and carved surface exceeding 6m
Radius R = 5m
2R-2=4+4
tan -¹ (4/3)=53.28°
2x53.28°=106°
Surface area =2x22/7x5x3.6x106/360=33.3sqm.
Arc=9.25m
MATERIAL
Tie-2x8x0.18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x1.77x0.1x0.1=0.035cum.
Ribs-6x1.54x0.23x0.1=0.213cum.
Struts-2x1.72x0.1x0.1=0.034cum.
Total=0.476cum.
=0.476x4 = 1.904 cum.
laggings-75x3.6x0.125x0.075=2.531cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6x0.175x0.075=0.378
Total = 7.103cum.
Qty taken as 1/8th of qty for cost of using
once
= 7.103/8 = 0.8885 cum (887.90 cudm)
1197 Second class kail wood in scantling 260 10 cudm
Fittings:
32 no. @0.50cm each = 16m
Straps-50mmx10mm = 8 Nos. @0.25cm each = 2m
Total = 18m @ 3.9kg/m = 70.2 kg. = 0.702qtl.

0.702/8 = 0.0878 qtl.
1225 Mild steel flat strap fitting 4120 quintal

160x 0.254x 1.58=64.21 kg=0.64qtl.
0.64/8 = 0.08 qtl
1034 Bolts and nuts upto 300 mm in length 5200 quintal
Carriage of steel = 0.1342 t

0.1342/8 = 0.0168 tonne
LABOUR
112 Carpenter 2nd class 714 Day
114 Beldar 645 Day
Less Cost of shuttering etc. for an arch exceeding 6 m span i.e. for an
TOTAL
Add 1 % for water charges on all except (A) i.e. on (2675.86 - -57113
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (22088.85 - -57113
Cost of 33.31sqm.
Cost per sqm
Say
6.12.1 6.12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation
6.12.1 Cement 7.5 1:3
mortar in foundations and
(1 cement : 3 plinthsand)
coarse in :
MATERIAL
Cement mortar 1:3
3.8 Cement mortar 1:3 (1 cement : 3 coarse sand) 5024.15 cum
9999 Sundries & Scaffolding 2.12 L.S.
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
designation
6.12.2 cement 7.51:4
mortar in foundations
(1 cement : 4and plinth
coarse in :
sand)
MATERIAL
Cement mortar 1 : 4
3.9 Cement mortar 1 : 4 (1 cement : 4 coarse sand 4355.2 cum
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
designation
6.13.1 Cement 7.5 1:3
mortar in superstructure abovesand)
(1 cement :3 coarse plinth level up to floor V level.
MATERIAL
Cement mortar 1:3
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour for lifting materials:
115 Coolie 645 Day
10 x 0.115 x 0.75 x 1.5
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
designation
6.13.2 Cement 7.5 1:4
mortar in superstructure abovesand)
(1 cement :4 coarse plinth level up to floor V level.
MATERIAL
Cement mortar 1 : 4
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
10 x 0.115 x 0.75 x 1.5
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.14 6.14 Extra for half brick masonry in superstructure, above floor V level for every four
Code floors or part thereof by mechanical means.
Details of cost for 59.83 sqm per four floors .
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 59.83 sqm.
Cost for 1 cum
Say
6.15 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every
Code third course of half brick masonry.
6mm dia. M.S. bars (round) 2 Nos. @ 30

meter/10sqm. = 60 metre @ 0.22kg/m =13.2
kg
1002 Mild steel round bar 12 mm dia and below 4850 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.16.1 6.16 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation
6.16.1 Cement mortar 1:410 (1 in foundation
cement and plinth
: 4 coarse sand)in:
MATERIAL
1984 Common burnt clay F.P.S. (non modular) bricks 4600 ### Nos
Cement mortar 1 : 4
2207 Carriage of Brick tiles 262.29 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.16.2 6.16 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
class designation
6.16.2 Cement mortar 1:610 (1 in foundation
cement and plinth
: 6 coarse sand)in:
MATERIAL
Cement mortar 1 : 6
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.17 6.17 Tile brick masonry with common burnt clay machine moulded tile bricks of class
Code designation 12.5 conforming to IS : 2690 (Part
Description RateI) in foundation
Unitand plinth in
MATERIAL
7904 Machine moulded common burnt clay tile brick 4600 ### Nos
Cement mortar 1 : 6
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.18 6.18 Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of
Code class designation 10 in superstructure above
Description plinth level upUnit
Rate to floor V level in
MATERIAL
Cement mortar 1 : 6
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour for lifting of materials
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
Code class designation 10 in plain arch work in superstructure
Description Rate above
Unit plinth and upto
MATERIAL
Cement mortar 1 : 4
Centering and shuttering, area same as in item no. 6.9
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
Code class designation 10 in gauged arch work in
Description superstructureUnit
Rate above plinth and
MATERIAL
Cement mortar 1 : 4
9999 Sundries and shuttering 2.12 L.S.
Centering and shuttering, area same as in item no. 6.9
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.21 6.22 Tile brick masonry work 5 cm thick with common burnt clay F.P.S. (non modular)
Code tile bricks of class designation 10 in cement
Description mortar 1:3 (1 cement
Rate Unit : 3 coarse
Cement mortar 1:3
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Sqm.
Cost per sqm.
Say
6.22 6.23 Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of
Code class designation 7.5 in super structure above
Description Rateplinth level upto
Unit floor V level with
Details of cost for 1sqm. of Honey comb brick works-
MATERIAL
Brick work, with bricks of class designation 75, in cement mortar 1:4 (
1 m x 1 x 0.143 m x 4.5/7.5 = 0.069 cum
6.4.1 Rate as per item No 6.4.1 of SH :- Brick work. 8418.2 cum
9999 Extra for delay due to fine work 2.12 L.S.
TOTAL
TOTAL
Add 12% GST applicable on work contract, by reversible method (multiply
TOTAL
TOTAL
Cost for 1 sqm.
Say
6.23 6.24 Extra for laying brick work in or under water and/or liquid mud including cost of
Code pumping or bailing out water and removingRate
Description slush etc. complete.
Unit NOTE :- The
Details of cost for depth of water 0.30m depth.
pumping hours = 3 hrs. on 0.375 day.
11 Hire charges of Pumpset of capacity 4000 litre 700 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
6.24 6.25 Extra for laying brick work in or under foul position.
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
6.25.1 6.26 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class
designation
6.26.1 From ground7.5 in exposed
level brick
upto plinth work including making horizontal and vertical
level
Cement mortar 1 : 6
9999 Sundries including steel/wooden strips for ma 2.12 L.S.
LABOUR
For selection of bricks
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.25.2 6.26 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class
designation
6.26.2 Above plinth7.5 in exposed
level upto floorbrick work including making horizontal and vertical
V level
MATERIAL
Cement mortar 1 : 6
LABOUR
For selection of bricks
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
exposed
6.27.1 From bricklevel
ground workupto
including
plinth making
level horizontal and vertical grooves 10mm wide
MATERIAL
Cement mortar 1 : 6
9999 Sundries i/c steel / wooden strips for making 2.12 L.S.
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
exposed
6.27.2 Above bricklevel
plinth work including
upto floor Vmaking
level horizontal and vertical grooves 10mm wide
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.27.1 6.28 Brick work with common burnt clay machine moulded modular bricks of class
designation
6.28.1 From ground12.5 inupto
level exposed brick
plinth levelwork including making horizontal and vertical
1986 Common burnt clay modular bricks class desi 5200 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.27.2 6.28 Brick work with common burnt clay machine moulded modular bricks of class
designation
6.28.2 Above plinth12.5
levelinupto
exposed
floor brick work including making horizontal and vertical
V level
MATERIAL
1986 Common burnt clay modular bricks class desi 5200 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.28.1 6.29 Brick work with common burnt clay machine moulded F.P.S. (non modular)
bricksground
6.29.1 From of classlevel
designation 12.5
upto plinth in exposed brick work including making
level
MATERIAL
7903 Machine moulded common burnt clay FPS (non 4700 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.28.2 6.29 Brick work with common burnt clay machine moulded F.P.S. (non modular)
bricks of
6.29.2 Above class
plinth designation
level upto floor12.5 in exposed brick work including making
V level
MATERIAL
7903 Machine moulded common burnt clay FPS (non 4700 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.29.1 6.3 Brick work with common burnt clay machine moulded perforated F.P.S. (non
modular)
6.30.1 From bricks
ground of upto
level classplinth
designation
level 12.5 conforming IS : 2222 in exposed brick
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.29.2 6.3 Brick work with common burnt clay machine moulded perforated F.P.S. (non
modular)
6.30.2 Above bricks
plinth levelof upto
classfloor
designation
V level 12.5 conforming IS : 2222 in exposed brick
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.30.1 6.31 Brick work with common burnt clay machine moulded perforated modular bricks
of class
6.31.1 From designation
ground 12.5plinth
level upto conforming
level to IS : 2222 in exposed brick work including
MATERIAL
3.11 Cement mortar 1 : 6 (1 cement : 6 coarse sand 3686.3 cum
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.30.2 6.31 Brick work with common burnt clay machine moulded perforated modular bricks
of classplinth
6.31.2 Above designation 12.5
level upto conforming
floor V level to IS : 2222 in exposed brick work including
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.31.1 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in
superstructure
6.32.1 Cement mortar above plinth level
1:4 (1 cement up to floor
: 4 coarse sand)five level in :
MATERIAL
7008 F.P.S.(non modular) clay fly ash bricks class 4500 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour element required for lifting of materials above floor two lev
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.31.2 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in
superstructure
6.32.2 Cement mortar above plinth level
1:6 (1 cement up to floor
: 6 coarse sand)five level in :
MATERIAL
7008 F.P.S.(non modular) clay fly ash bricks class 4500 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.32.1 6.34 Brick work with non modular fly ash bricks conforming to IS:12894, class
designation
6.34.1 Cement 10 average
mortar compressive
1:4 (1 cement strength
: 4 coarse sand) in super structure above plinth
MATERIAL
7737 Fly ash bricks conforming to I.S. 12894 3950 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.32.2 6.34 Brick work with non modular fly ash bricks conforming to IS:12894, class
designation
6.34.2 Cement 10 average
mortar compressive
1:6 (1 cement strength
: 6 Coarse sand) in super structure above plinth
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.33.1 6.35 Brick work with modular calcium silicate bricks machine moulded conforming to
IS:4139, mortar
6.35.1 Cement class designation 10 :average
1:4 (1 cement compressive
4 coarse sand) strength in super structure
MATERIAL
7738 Calcium Silicate Bricks machine moulded confi 5050 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.33.2 6.35 Brick work with modular calcium silicate bricks machine moulded conforming to
IS:4139, mortar
6.35.2 Cement class designation 10 :average
1:6 (1 cement 6 Coarse compressive
sand) strength in super structure
MATERIAL
7738 Calcium Silicate Bricks machine moulded confi 5050 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.34.1 6.36 Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to
IS: 4885 Mortar
6.36.1 Cement ) in cement
1:4 ( mortar 1:4: (1
1 cement cementsand)
4 coarse : 4 coarse sand) in foundation and
MATERIAL
7736 Extruded burnt flyash clay sewer bricks confo 5000 ### Nos
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.35 6.37 Brick work with modular extruded brunt fly ash clay sewer bricks (conforming to
Code IS : 4885) in arches in foundation and plinthRate
Description in cement mortar 1:3 ( 1 cement : 3
Unit
MATERIAL
7736 Extruded burnt flyash clay sewer bricks confo 5000 ### Nos
Cement Mortar 1:3 (1 cement : 3 fine sand).
3.3 Rate as per item no 3.3 SH Mortar 4382.15 cum
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
6.36 6.38 Providing and laying autoclaved aerated cement blocks masonry with 100 mm
Code thick AAC blocks in super structure above Rate
Description plinth level up toUnit
floor V level in
MATERIAL
8655 Autoclaved aerated cement (AAC) blocks 2650 cum
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
Reinforcement bars
5.22.1 Rate as per item no. 5.22.1 of SH : Reinforc 88.95 kg
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
6.37 6.4 Providing and laying Gypsum panel partitions 100 mm thick with water proof
Code Gypsum panels of size 666x500x100 mm, made
Description Rate of calcite phosphor
Unit Gypsum
MATERIAL
8656 Gypsum panel 666 X 500 X 100 mm size 480 sqm
8657 Bonding plaster for Gypsum panel 25.5 kg
9999 Sundries & scaffolding 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
6.38 6.41 Extra for Gypsum panel Partitions in superstructure above floor V level for every
Code four floors or part thereof.
Details of cost for 10 sqm. per four floor
Extra labour element for lifting of materials above floor V level.
115 Coolie 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm
Say
6.39 6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay
Code F.P.S. (non modular) bricks of class designation
Description Rate 7.5 including
Unitgrouting with
9999 Excavation and disposal of surplus earth 2.12 L.S.
2nd class bricks = 42 nos. +
Add wastage @ 10% = 4.2 nos.
= 46.2 nos.
Say 46.00 nos.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
6.40.1 6.45 Half brick masonry with non modular fly ash bricks of class designation 10,
conformingio
6.45.1 Cement mortarIS1:12894, in super
: 3 (1 cement : 3structure above plinth and upto floor V level.
coarse sand)
MATERIAL
Cement mortar 1:3 (1 cement : 3 coarse sand)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.40.2 6.45 Half brick masonry with non modular fly ash bricks of class designation 10,
conformingio
6.45.2 Cement mortarIS1:12894, in super
: 4 (1 cement : 4structure above plinth and upto floor V level.
coarse sand)
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
6.41 6.47 Providing and laying autoclaved aerated cement blocks masonry with
Code 150mm/230mm/300 mm thick AAC blocks in
Description super structureUnit
Rate above plinth level up
MATERIAL
8655 Autoclaved aerated cement (AAC) blocks 2650 cum
357 Polymer modified adhesive mortar 14 kg
LABOUR
123 Mason (brick layer) 1st class 784 day
124 Mason (brick layer) 2nd class 714 day
115 Coolie 645 day
0.75x1.50 = 1.13
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
7.1.1 7.1 Random rubble masonry with hard stone in foundation and plinth including
7.1.1 levellingmortar
Cement up with1:6cement concrete
(1 cement 1:6:12sand)
: 6 coarse (1 cement : 6 coarse sand : 12 graded
MATERIAL
1157 Stone for masonary work 1100 cum
1154 Through and bond stone size 24 x24 x39 cm 5000 100 Nos
Carriage:
2215 Carriage of Soling stone & masonary stone 192.86 cum
7.00x24cmx24cmx39cm = 0.16 cum.
1.00cum. + 0.16 cum. = 1.16 cum.
LABOUR
125 Mason (for plain stone work) 2nd class 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Cement concrete 1:6:12 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.2.1 7.2 Random rubble masonry with hard stone in superstructure above plinth level and
7.2.1 upto floor
Cement five level,
mortar 1:6 (1including
cement :leveling
6 coarseup with cement concrete 1:6:12 (1
sand)
MATERIAL
Carriage of stone-
7.00x24cmx24cmx39cm = 0.16 cum.
1.00cum. + 0.16 cum. = 1.16 cum.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.3.1 7.4 Extra for random rubble masonry with hard stone in :
7.4.1 Square or rectangular pillars
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.3.2 7.4 Extra for random rubble masonry with hard stone in :
7.4.2 Circular pillars
LABOUR
Labour for cutting and dressing stones-
115 Coolie 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
7.4 7.5 Extra for random rubble masonry with hard stone curved on plan for a mean
Code radius not exceeding 6 m.
LABOUR
Labour for cutting and dressing stones-
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.5.1 7.6 Coursed rubble masonry (first sort) with hard stone in foundation and plinth
7.6.1 with : mortar 1:6 (1 cement : 6 coarse sand)
Cement
MATERIAL
7.00x24cmx24cmx39cm = 0.16 cum.
1021+0.16=1.37 Cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.6.1 7.7 Coursed rubble masonry (second sort) with hard stone in foundation & plinth
7.7.1 with : mortar 1:6 (1 cement : 6 coarse sand)
Cement
MATERIAL
Carriage:
7.00x24cmx24cmx39cm = 0.16 cum.
1.10+0.16 cum = 1.26 cum.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.7.1 7.8 Coursed rubble masonry with hard stone (first or second sort) in superstructure
7.8.1 above plinth
Masonry worklevel
(firstand upto
sort), infloor fivemortar
cement level. 1:6 (1 cement : 6 coarse sand)
MATERIAL
7.00 x 24 cm x24 cm x 39 cm = 0.16 cum.
1.21 cum. + 0.16 cum = 1.37 cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
9999 Sundries, scaffolding etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.7.2 7.8 Coursed rubble masonry with hard stone (first or second sort) in superstructure
7.8.2 above plinth
Masonry worklevel and upto
(second sort),floor five level.
in cement mortar 1:6 (1 cement: 6 coarse sand)
MATERIAL
Carriage:
7.00x24cmx24cmx39cm = 0.16 cum.
1.10+0.16 cum = 1.26 cum.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
9999 Sundries, scaffolding etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.8.1 7.1 Extra for coursed rubble masonry with hard stone (first or second sort) in:
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.8.2 7.1 Extra for coursed rubble masonry with hard stone (first or second sort) in:
7.10.2 Circular pillars
LABOUR
Labour for cutting and dressing :
115 Coolie 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
7.9 7.11 Extra for coursed rubble masonry with hard stone (first or second sort) curved
Code on plan for a mean radius not exceeding 6 Rate
Description m. Unit
Extra
Labour for cutting and dressing:
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum.
Say
7.10.1.1 7.12 Stone work in plain ashlar in super structure upto floor five level in cement
7.12.1 Onemortar 1:6dressed
face (1 cement : 6 coarse sand) including pointing with cement mortar 1:2
7.12.1.1 Red sand stone
Details of cost for 10 cudm.
MATERIAL
Red sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
1160 Red sand stone block 80 10 cudm
2216 Carriage of Stone blocks white & red sand sto 145.72 tonne
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg = 0.03065 tonne say 0.031 t
Extra labour for lifting of materials upto floor V level
(0.01x1.50 = 0.015)
115 Coolie 645 Day
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
100 Bandhani 714 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Mortar for laying and pointing 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.12.1.2 White sand stone
MATERIAL
1161 White sand stone block 205 10 cudm
Total = 13.33 cudm.
Extra labour for lifting of materials upto floor V level.
(0.01 x 1.50 =0.015)
115 Coolie 645 Day
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
mortar
7.12.2 Both 1:6dressed
MATERIAL
Cost of stone
(0.01x1.50 = 0.015)
115 Coolie 645 Day
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
mortar
Details of cost for 10 cudm or 0.01 cum
MATERIAL
Total = 13.33 cudm.
Extra labour for lifting of material upto floor V level.
(0.01 x 1.50 = 0.015)
115 Coolie 645 Day
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.11.1.1 7.13 Stone work plain ashlar in arches in super structure upto floor V level in cement
face (1 cement : 3 coarse sand) including centering, shuttering and
MATERIAL
Total = 13.33 cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Centering and shuttering 2.12 L.S.
9999 Extra for using white cement 2.12 L.S.
Extra labour for lifting of material (above floor two level up to floor five
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
MATERIAL
Total = 13.33 cudm.
@ 2.30kg/cudm = 13.33x2.30=30.659 kg = 0.03065 tonne say 0.031t
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour for lifting of material (above floor

two level up to floor five level)
(0.01 x 1.5 = 0.015)
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
mortar
MATERIAL
Total = 13.33 cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day

(0.01 x 1.5 = 0.015)
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
mortar
MATERIAL
Finished work = 10 cudm.
Total = 13.33 cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
(0.01 x 1.5 = 0.015)
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.12.1.1 7.14 Stone work plain ashlar in domes , in super structure upto floor V level in cemen
MATERIAL
Total = 13.33 cudm.
@ 2.30kg/cudm = 13.33x2.30=30.659 kg=0.03065 tonne say 0.031 t
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Centring and shuttering 2.12 L.S.
Extra labour for lifting of material up to floor

five level
(0.01 x 1.5 = 0.015)
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
MATERIAL
Total = 13.33 cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour for lifting of material up to floor five level (0.01 x 1.5 = 0.0
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
mortar
MATERIAL
Total = 13.33 cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
mortar
MATERIAL
Total = 13.33 cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.13.1.1 7.15 Stone work ashlar punched (ordinary) in superstructure upto floor five level in
7.15.1 Onecement
facemortar
dressed1:6 (1 white cement : 6 coarse sand) including pointing with
MATERIAL
Total = 13.33 cudm.
@ 2.30kg/cudm = 13.33x2.30=30.659 tonne = 0.03065kg say 0.031 t
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour for lifting of materials upto floor

V level
(0.01x1.50 = 0.015)
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.15.1 Onecement
facemortar
dressed1:6 (1 white cement : 6 coarse sand) including pointing with
MATERIAL
Total = 13.33 cudm.
@ 2.30kg/cudm = 13.33x2.30=30.659 tonne = 0.03065kg say 0.031 t
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour for lifting of materials upto floor

V level
(0.01x1.50 = 0.015)
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
cement
7.15.2 Both mortar
faced 1:6 (1 white cement : 6 coarse sand) including pointing with
punched
MATERIAL
Total = 13.33 cudm
@ 2.30kg/cudm = 13.33x2.30 = 30.659 tonne = 0.03065 kg say 0.031 t
0.01x1.50 = 0.015
115 Coolie 645 Day
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
cement
7.15.2 Both mortar
faced 1:6 (1 white cement : 6 coarse sand) including pointing with
punched
MATERIAL
Total = 13.33 cudm.
@ 2.30kg/cudm = 13.33x2.30 = 30.659 tonne = 0.03065 kg say 0.031 t
Extra labour for lifting of material upto floor V level.
(0.01 x 1.50 = 0.015)
115 Coolie 645 Day
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.14 7.16 Extra for stone work, random rubble / coursed rubble masonry / ashlar masonry
Code above floor V level for every four floors or part
Description Ratethereof. Unit
above floor V level
Labour required for lifting of material
(above floor five level for each additional four floor or part their of)
Extra labour for lifting of materials above floor V level (0.01 x 2.0 = 0.0
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.15.1 7.17 Extra for plain ashlar or ashlar punched in :
9999 Labour and materials 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.16 7.18 Extra for stone work; plain ashlar or ashlar punched curved on plan with a mean
Code radius not exceeding 6 m.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.17 7.19 Extra for additional cost of centering for arches exceeding 6m span including all
Code strutting, bolting, wedging etc. and removalRate
Description (area of soffit toUnit
be measured).
Centering and shuttering for arches and carved surface exceeding 6m
Radius R = 5m
2R-2 = 4+4
tan -¹ (4/3)=53.28°
2x53.28=106°
Surface area =2x22/7x5x3.6x106/360=33.31sqm.
Arc=9.25m
MATERIAL
Tie-2x8x0.18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x1.77x0.1x0.1=0.035cum.
Ribs-6x1.54x0.23x0.1=0.213cum.
Struts-2x1.72x0.1x0.1=0.034cum.
Total=0.476cum.
=0.476x4 = 1.904 cum.
laggings-75x3.6x0.125x0.075=2.531cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6x0.175x0.075=0.378
Total = 7.103cum.
1197 Second class kail wood in scantling 260 10 cudm
Fittings:
32 no. @0.50cm each = 16m
Straps-50mmx10mm = 8 Nos. @0.25cm each = 2m
Total = 18m
18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q

0.702/8 = 0.08775 Qtl
1225 Mild steel flat strap fitting 4120 quintal

160x.254xl .58=64.21 kg=0.64q.
0.64/8 = 0.08 Qtl
Carriage of steel = 0.1342t

0.1342/8 = 0.01677 t = 0.0168 t
LABOUR
114 Beldar 645 Day
Less Cost of shuttering etc. for an arch exceeding 6 m span i.e. for an
TOTAL
Add 1 % for water charges on all except (A) i.e. on (-1043.2 - -60832.
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (18369.79 - -60832
Cost of 33.31sqm.
Cost per sqm of soffit area
Say
7.18.1 7.2 Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in
7.20.1 Redcement
sandmortar
stone1:6 (1 cement : 6 coarse sand) including pointing with white
MATERIAL
Total = 13.33 cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
(0.01x1.50=0.015)
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.18.2 7.2 Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in
cement
7.20.2 White mortar
sand stone1:6 (1 cement : 6 coarse sand) including pointing with white
MATERIAL
Total = 13.33 cudm.
@ 2.30kg/cudm = 13.33x2.30=30.659 kg = 0.03065 tonne say 0.031t.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
0.01x1.50=0.015
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.19.1 7.21 Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in :
7.21.1 Triangular or Square or rectangular pillars
9999 LABOUR 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.19.2 7.21 Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in :
7.21.2 Circular or polygonal pillars
9999 LABOUR 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.2 7.22 Extra for stone work ashlar sunk or moulded in cornices.
Details of cost for a cornice 30cm long, 60cm deep and 15cm projectio
Extra labour :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30cm long 60cm deep and 15cm girth
Cost of per metre per cm girth (60cm deep)
Say
7.21 7.24 Extra for stone work (veneer work) curved on plan with a mean radius not
Code exceeding 6 m.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cudm.
Cost of 1 cum.
Say
7.22 7.26 Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as
Code per design in cement mortar 1:2 (1 cement Rate
Description : 2 coarse sand),Unit
including making the
Details of cost for one dowel
9999 Cost of stone including carriage 2.12 L.S.
9999 Labour for dressing dowel cutting chase and fi 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each dowel
Say
7.23.1.1 7.28 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide
beyond
7.28.1 Red sand the wall :as measured along the slope in cement mortar 1:4 (1 cement : 4
stone
7.28.1.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Details of cost for a chajja 2.00 sqm. (finished work)
MATERIAL
Chisel dressed 80cm sloping length plus

20cm bearing Area = 2.5xl.00=2.50sqm
1164 Red sand stone slab 40 mmthick (un-dressed) 230 sqm
@ 2.3kg/cudm.
Labour for dressing:
9999 Cutting threads and cost of nuts, washers, etc 2.12 L.S.
Mortar for pointing 1:2 (1 Cement : 2 Stone dust)
9999 Pigment 2.12 L.S.
9999 Extra cost of white cement 2.12 L.S.
LABOUR
114 Beldar 645 Day
9999 Scaffolding and sundries etc. 2.12 L.S.
Brick cover support 4 courses with bricks of class designation 75
4x7+5+5=38cm girth 2.5m length =38cmx2.5m=95cm
9999 Cost of Brick cover support. 2.12 L.S.
Brick work in triangular gap above cover with

bricks of class designation 7.5 in cement
mortar 1:4
1/2x2.5x0.2x0.07=0.018cum.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 sqm.
Cost of 1 sqm.
Say
7.23.2.1 7.28 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide
beyond
7.28.2 White the stone
sand wall as: measured along the slope in cement mortar 1:4 (1 cement : 4
7.28.2.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Details of cost for a chajja 2.00 sqm. (finished work)
MATERIAL
Chisel dressed 80cm sloping length plus

20cm bearing Area = 2.5x1.00=2.50sqm
1165 White sand stone slab 40 mm thick (un-dress 250 sqm
@ 2.3kg/cudm.
Anchoring steel bars 12mm dia. 45cm long

5 Nos. @ 0.80kg/m = 0.02q
9999 Cutting threads and cost of nuts, washers, etc 2.12 L.S.
Mortar for pointing 1:2 (1 Cement : 2 Stone dust)
LABOUR
114 Beldar 645 Day
Brick cover support 4 courses with bricks of class designation 75
4x7+5+5=38cm girth 2.5m length =38cmx2.5m=95cm
9999 Cost for Brick cover support . 2.12 L.S.
Brick work in triangular gap above cover with

bricks of class designation 5 in cement
mortar 1:4
1/2x2.5x0.2x0.07=0.018cum.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 sqm.
Cost of 1 sqm.
Say
7.24.1 7.29 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm
7.29.1 Redprojection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in
sand stone
Details of cost for (2.5x0.75m) 1.875 sqm.
MATERIAL
Taking 2.5mx75cm projection + 15cm bearing = 2.5x0.9 = 2.25 sqm.
@ 2.3kg/cudm.
9999 Mortar for pointing 1:2 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.875 sqm.
Cost of 1 sqm.
Say
7.24.2 7.29 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm
projection
7.29.2 White sandinstone
cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in
Details of cost for (2.5x0.75m) 1.875 sqm.
MATERIAL
Taking 2.5mx75cm projection + 15cm bearing = 2.5x0.9 = 2.25 sqm.
@ 2.3kg/cudm.
9999 Mortar for pointing 1:2 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.875 sqm.
Cost of 1 sqm.
Say
7.25 7.3 30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone
Code brackets, fixed in walls with cement mortarRate
Description 1:4 (1 cement : 4Unit
coarse sand),
Detail of cost for window 1.6m length and 0.70m width = 1.12 sqm.
MATERIAL
over all width 0.70+0.15=0.85 metres
Total area = 1.6x0.85=1.36sqm.
Red stone brackets (chisel dressed) 30mm average thickness over all w
0.53+0.23=0.76m
2x0.3x0.76=0.46
Total 1.36+0.46 =1.82sqm.+
Add wastage @10% = 0.18sqm.
Total = 2.00 sqm.
9999 Cement mortar 1 :4 2.12 L.S.
Labour for dressing and fixing:
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.12 sqm.
Cost of 1 sqm.
Say
7.26 7.31 Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded
Code including providing and fixing with 4 Nos gun
Description Ratemetal cramp 25x6
Unit mm 30 cm long
Details of cost for 1 bracket
Quantity of stone for 1 bracket
1 x 55 x 22.5 x 45cm = 0.056cum or 56 cudm.
Red sand stone = 56 cudm.
Add wastage 10% = 5.6 cudm.
Total = 61.6 cudm.
@ 2.3kg/ cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
373 Cramp Gun metal 25x6x300 mm 80 each
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Extra labour for ornamental finish :
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 Bracket
Say
7.27.1 7.32 Stone work, plain in copings, cornices, string courses and plinth courses, upto
7.32.1 Red75 mm thick
sand in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing
stone
Details of cost for cornices (30cm long 30cm deep and 7.5cm project-
MATERIAL
Stone work plain ashlar cyclopean
3x3x0.75 = 6.75 cudm
7.12.1.1 Rate as per item no 7.12.1.1 of SH : Stone W 50997 cum
Extra labour for making the cornices
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (485.21 - 344.23) =
Cost of 6.75 cum.
Cost per cum.
Say
7.27.2 7.32 Stone work, plain in copings, cornices, string courses and plinth courses, upto
75 mmsand
7.32.2 White thickstone
in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing
Details of cost for cornices (30cm long 30cm deep and 7.5cm project-
MATERIAL
Stone work plain ashlar cyclopean
3x3x0.75 = 6.75 cudm
7.12.1.2 Rate as per item no 7.12.2 of SH : Stone Wor 73291 cum
Extra labour for making the cornices
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6.75 cum.
Cost per cum.
Say
7.28.1 7.33 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1
7.33.1 Redcement
sand: 3stone
coarse sand), including pointing in white cement mortar 1:2 (1 white
MATERIAL
Red sand stone slab 40mm = 1.00 sqm
Total = 1.10 sqm.
1164 Red sand stone slab 40 mm thick (un-dressed 230 sqm
LABOUR
For making, dressing and fixing
114 Beldar 645 Day
9999 Mortar and Sundries 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
7.28.2 7.33 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1
cement
7.33.2 White : 3 coarse
sand stone sand), including pointing in white cement mortar 1:2 (1 white
MATERIAL
White sand stone slab 40mm = 1.00 sqm
Total = 1.10 sqm.
LABOUR
For making, dressing and fixing
114 Beldar 645 Day
9999 Mortar and Sundries 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
7.29 7.34 Extra for laying stone work in or under water and/or liquid mud including cost of
Code pumping or bailing out water and removingRate
Description slush etc. complete.
Unit NOTE :- The
Details of cost for depth of water 0.30m.
pumping hours = 3 hrs. on 0.375day.
114 Beldar 645 Day
for cleaning slush
TOTAL
TOTAL
TOTAL
TOTAL
Say
7.3 7.35 Extra for laying stone work in or under foul position.
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
7.31.1.1 7.38 Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm
7.38.1 8mmthick bed
thickof(mirror
cement mortar 1:3
polished and(1 cement cut
machine : 3 coarse
edge) sand), including pointing in
7.38.1.1 Granite stone of any colour and shade
MATERIAL
Granite stone tile = 10.00sqm.
Add 2.5% wastage = 0.25sqm.
Total =10.25 sqm
2750 8 mm thick granite stone tiles (mirror polished 690 sqm
9977 Carriage of granite tiles 2.12 L.S.
slurry @ 3.3 kg/sqm
9999 Mortar for pointing in white cement 2.12 L.S.
LABOUR
Labour for placing and fixing :
114 Beldar 645 Day
9999 Granular sand particles mixed with araldite to 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
7.31.1.2 7.38 Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm
7.38.1 8mmthick bed
thickof(mirror
cement mortar 1:3
polished and(1 cement cut
machine : 3 coarse
edge) sand), including pointing in
7.38.1.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble
MATERIAL
8mm thick Raj Nagar white stone tile = 10.00sqm.+
Add 2.5% wastage = 0.25sqm.
Total = 10.25sqm
7439 8mm thick (mirror polished tiles machine cut 450 sqm
9977 Carriage of Raj Nagar white stone tiles 2.12 L.S.
slurry @ 3.3 kg/sqm
Labour for placing and fixing :
114 Beldar 645 Day
9999 Granular sand particles mixed with araldite to 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
8.1.1.1 8.1 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for
8.1.1 wallNagar
Raj lining Plain
(veneer work),
white backing
marble/ filledgreen
Udaipur with amarble/
grout of average
Zebra black12marble.
mm thick in
8.1.1.1 Area of slab upto 0.50 sqm
Finished work = 0.50sqm.
Add for wastage @ 20% = 0.10 sqm.
Total = 0.60 sqm.
7452 Raj nagar plain white marble (table rubbed an 538 sqm
White cement mortar 1:2 (1 white cement : 2 marble dust)
LABOUR
For fixing
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.50 sqm.
Cost for one sqm.
Say
8.1.1.2 8.1 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for
8.1.1 wallNagar
Raj lining Plain
(veneer work),
white backing
marble/ filledgreen
Udaipur with amarble/
grout of average
Zebra black12marble.
mm thick in
8.1.1.2 Area of slab over 0.50 sqm
Finished work = 1.00 sqm.
Add for wastage @ 20% = 0.20 sqm.
Total = 1.20 sqm.
7453 Raj nagar plain white marble (table rubbed a 650 sqm
White cement mortar 1:2 (1 white cement : 2 marble dust)
LABOUR
For fixing
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 sqm
Cost for one sqm
Say
8.2.1.1 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and
8.2.1 prepolished,
Raj Nagar Plainmachine cut for kitchen
white marble/ Udaipurplatforms, vanity
green marble/ counters,
Zebra black window
marble sills,
Mirror polished Abu plain white = 0.50 sqm.+Wastage 5% 0.025 sqm.
7452 Raj nagar plain white marble (table rubbed an 538 sqm
20mm thick Cement mortar 1 : 4 (1 cement : 4 coarse sand)
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
9999 Moulding and edge polishing 2.12 L.S.
9999 Sundries apoxy resin & cutting machine etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.50 sqm.
Cost for 1.00 sqm
Say
8.2.1 prepolished,
Raj Nagar Plainmachine cut for kitchen
white marble/ Udaipurplatforms, vanity
green marble/ counters,
Zebra black window
marble sills,
Mirror polished Abu plain white = 1.00 sqm.+ Wastage 5% 0.05sqm.=
7453 Raj nagar plain white marble (table rubbed a 650 sqm
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 sqm.
Say
8.2.2 prepolished,
Granite of anymachine cut for
colour and kitchen platforms, vanity counters, window sills,
shade
Mirror polished granite= 0.50 sqm.+Wastage 5% 0.025 sqm.= 0.525 s
7295 Granite of any colour, 18 mm thick (slab area 1800 sqm
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.50 sqm.
Cost for 1.00 sqm
Say
8.2.2 prepolished,
Granite of anymachine cut for
colour and kitchen platforms, vanity counters, window sills,
shade
Mirror polished granite= 2.00 sqm.+Wastage 5% 0.10sqm.= 2.10 sqm
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.00 sqm.
Cost for 1.00 sqm
Say
8.3.1 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,
including machine polishing to edge to give high gloss finish etc. complete as
8.3.1 Marble work
Details of cost for 10.00 m
LABOUR
19 Hand Grinder For mirror polish 250 Day
114 Beldar 645 Day
9999 Sundries Blades & Polished etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
8.3.2 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,
8.3.2 including
Granite machine polishing to edge to give high gloss finish etc. complete as
work
LABOUR
19 Hand Grinder For mirror polish 250 Day
114 Beldar 645 Day
9999 Sundries Blades & Polished etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
8.4 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item,
Code in facia and drops of width upto 150 mm with
Description epoxy resin based
Rate Unit adhesive,
Details of cost for facia 1.5m long and 0.15m wide
LABOUR
115 Coolie 645 Day
9999 Scaffolding, expoxy 2.12 L.S.
1.5x0.15x0.02 = 0.005cum.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.5 metre
Cost per metre
Say
8.5 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink
Code in kitchen platform, vanity counter and similar
Description Ratelocation in marble/
Unit Granite/ stone
Details of cost for providing an opening of required size and shape
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per opening
Say
8.6 8.6 Mirror polishing on marble work/Granite work/stone work where ever required to
Code give high gloss finish complete.
LABOUR
13 Machine for rubbing of floors 300 Day
114 Beldar 645 Day
101 Bhisti 714 Day
9999 Sundries grease, mop grinding stones etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
8.7.1 8.7 Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry
8.7.1 backing with
Gunmetal cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling
cramps
Details of cost for 10 no cramps
MATERIAL
Gun metal cramp
10 x 0.064 x 0.025 x 0.006 = 9.6 x 10^5
10 x 0.025 x 0.025 x 0.006 = 3.7 x 10^5
= 13.3 x 10^5
less hole 10 x 0.024 x 0.010 x 0.006 = 1.4 x 10^5
= 11.9 x 10^5 x 8640 = 1.03 kg
Add wastage @ 5% = 0.051kg.
Total = 1.08 kg.
7338 Gun metal cramp 315 kilogra
9999 Labour for fixing in position 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.934 kg.
Cost per kg
Say
8.7.2 8.7 Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry
8.7.2 backing with
Stainless cement
steel crampsmortar 1:2 ( 1 cement :2 coarse sand), including drilling
Details of cost for 10 nos
MATERIAL
Stainless steel cramp
10 x 0.064 x 0.025 x 0.006 = 9.6 x 10^5
10 x 0.025 x 0.025 x 0.006 = 3.7 x 10^5
= 13.3 x 10^5
less hole 10 x 0.024 x 0.010 x 0.006 = 1.4 x 10^5
= 11.9 x 10^5 x 7850 = 0.934 kg
Total = 0.981 kg.
7339 Stainless steel cramp 290 kilogra
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.934 kg.
Cost per kg
Say
8.8.1.1 8.8 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry
8.8.1 surfaceexpansion
Wedge backing including
type drilling necessary holes and the cost of bolt etc
8.8.1.1 Fastener with threaded dia 6 mm
Details of cost for 30nos. W.E.H. fastener
MATERIAL
7430 Wedge expansion hold fastner 1/4" or 6 mm 8 each
36.5mm length
(36.5+10mm)
LABOUR
116 Fitter (grade 1) 784 Day
114 Beldar 645 Day
9999 Hire and running charges for hand drill machine 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 nos.
Cost for one no.
Say
MATERIAL
44.5mm length
(44.5+10mm)
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 nos.
Cost for one no.
Say
MATERIAL
58.7mm length
Length (58.7+10mm) @ 0.05 kg./each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 nos.
Cost for one no.
Say
8.9.1.1 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar
8.9.1 1:3 (1thick
8mm cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including
8.9.1.1 Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble
8mm thick marble tiles.
Qty. = 1.00 sqm. +
Add wastage @ 2.5% = 0.025 sqm.
Total = 1.025 sqm.
2751 8 mm thick marble tiles (polished) Raj Nagar 400 sqm
9977 Carriage of tiles 2.12 L.S.
9999 Mortar for pointing 2.12 L.S.
114 Beldar 645 Day
9999 Sundries etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm.
Say
8.9.1.2 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar
8.9.1 1:3 (1thick
8mm cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including
8.9.1.2 Granite of any colour and shade
8mm thick Granite tiles.
Qty. = 1.00 sqm. +
Add wastage @ 2.5% = 0.025 sqm.
Total = 1.025 sqm.
2750 8 mm thick granite stone tiles (mirror polished 690 sqm
9999 Mortar for pointing 2.12 L.S.
114 Beldar 645 Day
9999 Sundries etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm.
Say
8.10.1 8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished,
of sizeAgaria
8.10.1 White 75x50 Marble
cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a
Stone
Details of cost for one No or 0.375 sqm.
MATERIAL
Agaria Marble Stone 1 X 0.75 X 0.50 = 0.375 sqm
Add wastage 20% = 0.075 sqm.
Total = 0.45sqm.
7244 Table rubbed polished stone 18 mm thick (75 1500 sqm
9999 Cement concrete 1:2:4 for filling 2.12 L.S.
9999 Labour for fixing, edge rounding and final polis 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.375sqm
Cost of 1.00 sqm
Say
8.10.2 8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished,
of size 75x50
8.10.2 Granite Stonecm deep and shade
of approved 1.8 cm thick, fixed in urinal partitions by cutting a
Details of cost for one No or 0.375sqm.
MATERIAL
Granite Stone 1x0.75x0.50 = 0.375sqm.+
Total = 0.45 sqm.
7245 Table rubbed polished stone 18mm thick (75x 1800 sqm
9999 Cement concrete 1:2:4 for fixing 2.12 L.S.
9999 Labour for fixing, edge rounding and final polis 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.375 sqm
Cost of 1.00 sqm
Say
8.11.1 8.11 Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work
8.11.1 for wallthick
18 mm liningItalian
(veneer work)stone
Marble including dado, skirting,
slab,Perlato, risers ofFire
Rosso verona, steps etc.,
Red in
or Dark
Code Emperadore etc.

Finished work= 0.5 sqm
Add for wastage @ 20%=0.1 sqm
Total 0.60 sqm
1240 18 mm thick Italian Marble stone slab, Perlato 3209 sqm
2216 Carriage of stone slab Cement mortar 1:3 (1 145.72 tonne
3.8 Rate as per Item No.3.8 of SH:M O R T A R S 5024.15 cum
368 White Cement Slurry @ 3.3kg/sqm 11200 tonne
2209 Carriage of white Cement 145.72 tonne
9999 Mortar for pointing in white cement (11.22) 2.12 L.S.
LABOUR :
FOR fixing
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.5 sqm
Cost of 1 sqm
Say
8.12.1.1 8.14 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre
8.14.1 Redheight, backing
sand stone filled with aface
- exposed grout ofdressed
fine averagewith
12 mm thick
rough cement mortar 1:3 (1
backing.
8.14.1.1 70 mm thick
MATERIAL
Finished work = 70 cudm. +
Total = 93.33 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
1237 Cutting marble or sand stone slab upto 50 mm 10 metre
Mortar for laying and pointing
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
fine averagewith
12 mm thick
backing.
8.14.1.2 60 mm thick
MATERIAL
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
fine averagewith
12 mm thick
backing.
8.14.1.3 50 mm thick
MATERIAL
Total = 66.7 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
fine averagewith
12 mm thick
backing.
8.14.1.4 40 mm thick
MATERIAL
Total = 53.33 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
fine averagewith
12 mm thick
backing.
8.14.1.5 30 mm thick
MATERIAL
Add wastage @ 33.3% = 9.99cudm.
Total = 39.99 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
- Exposed grout of average
machine 12 mm
cut and thick
table cement
rubbed withmortar
rough 1:3 (1
backing.
8.14.2.1 70 mm thick
MATERIAL
Total = 93.33 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
machine 12 mm
cut and thick
table cement
rubbed withmortar
rough 1:3 (1
backing.
8.14.2.2 60 mm thick
MATERIAL
Total = 80 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1
8.14.2 Red sand stone - Exposed face machine cut and table rubbed with rough
8.14.2.3 backing.
50 mm thick
MATERIAL
Total = 66.7 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
8.14.2 height,
Red sandbacking
stone filled with aface
machine 12 mm
cut and thick
table cement
rubbed withmortar
rough 1:3 (1
backing.
8.14.2.4 40 mm thick
MATERIAL
Total = 53.33 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,
8.14.2 Red backing
machine 12 mm
cut and thick
table cement
rubbed withmortar
rough 1:3 (1
backing.
8.14.2.5 30 mm thick
MATERIAL
Add wastage @ 33.3% = 9.99cudm.
Total = 39.99 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,sand
8.14.3 White backing
stone filled with a grout
- exposed of average
face fine dressed12 mmrough
with thick backing
cement mortar
. 1:3 (1
8.14.3.1 70 mm thick
MATERIAL
Total = 93.33 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,sand
with thick backing
cement mortar
. 1:3 (1
8.14.3.2 60 mm thick
MATERIAL
Total = 80 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,sand
with thick backing
cement mortar
. 1:3 (1
8.14.3.3 50 mm thick
MATERIAL
Total = 66.7 cudm.
@ 2.30 kg/cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,sand
with thick backing
cement mortar
. 1:3 (1
8.14.3.4 40 mm thick
MATERIAL
Total = 53.3 cudm.
@ 2.30 kg/cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,sand
with thick backing
cement mortar
. 1:3 (1
8.14.3.5 30 mm thick
MATERIAL
Total = 39.99 cudm.
@ 2.30 kg/cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
8.14.4 height, backing
White sand stone filled with a grout
- Exposed of average
face machine cut12 mm
and thick
table cement
rubbed mortar
with 1:3 (1
rough
backing.
8.14.4.1 70 mm thick
MATERIAL
Total = 93.33 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,sand
and thick
table cement
rubbed mortar
with 1:3 (1
rough
backing.
8.14.4.2 60 mm thick
MATERIAL
Total = 80 cudm.
@ 2.30kg/cudm
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,sand
and thick
table cement
rubbed mortar
with 1:3 (1
rough
backing.
8.14.4.3 50 mm thick
MATERIAL
Total = 66.7 cudm.
@ 2.30 kg/cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,sand
and thick
table cement
rubbed mortar
with 1:3 (1
rough
backing.
8.14.4.4 40 mm thick
MATERIAL
Total = 53.3 cudm.
@ 2.30 kg/cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
8.14.4 height, backing
White sand stone filled with a grout
and thick
table cement
rubbed mortar
with 1:3 (1
rough
backing.
8.14.4.5 30 mm thick
MATERIAL
Total = 39.99 cudm.
@ 2.30 kg/cudm.
Dressing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Fixing charges
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,saw
8.14.5 Gang backing filled with a grout of average 12 mm thick cement mortar 1:3 (1
cut stone
8.14.5.1 30mm thick White sand stone
MATERIAL
1.00 sqm + 0.05 sqm (Add wastage @ 5%) = 1.05 sqm
8684 White sand stone gang saw cut 30 mm thick 560 sqm
@ 2.30 kg/cudm.
Fixing charges
LABOUR
125 Mason (for plain stone work) 2nd class 714 day
100 Bandhani 714 day
114 Beldar 645 day
115 Coolie 645 Day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
height,saw
8.14.5 Gang backing filled with a grout of average 12 mm thick cement mortar 1:3 (1
cut stone
8.14.5.2 30mm thick Red sand stone
MATERIAL
1.00 sqm + 0.05 sqm (Add wastage @ 5%) = 1.05 sqm
8683 Red sand stone gang saw cut 30 mm thick 476 sqm
@ 2.30 kg/cudm.
Fixing charges
LABOUR
114 Beldar 645 day
115 Coolie 645 Day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
8.13 8.15 Providing and fixing stainless steel cramps of required size and shape for
Code anchoring stone wall lining to the backing or
Description securing adjacent
Rate Unit stones in stone
Details of cost for one cramp of 0.934kg
MATERIAL
Stainless steel cramp
10 x 0.064 x 0.025 x 0.006 = 9.6 x 10^5
10 x 0.025 x 0.025 x 0.006 = 3.7 x 10^5
= 13.3 x 10^5
less hole 10 x 0.024 x 0.010 x 0.006 = 1.4 x 10^5
= 11.9 x 10^5 x 7850 = 0.934 kg
Total = 0.981 kg.
7339 Stainless steel cramp 290 kilogra
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.934 kg.
Cost per kg
Say
8.14 8.16 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing
Code adjacent stones in stone wall lining in cement
Description Ratemortar 1:2 (1 Unit
cement : 2 coarse
Details of cost for one copper pin
MATERIAL
873 Copper pins 6 mm dia 7.5 cm long 10 each
9999 Labour for making pin in to required shape and 2.12 L.S.
9999 Sundries including hire charges of hand cut m 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one copper pin
Say
8.15 8.17 Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough
Code facing on the exposed surface with stone strips
Description Rate of minimumUnit
length 300 mm and
Dholpur stone 40mm thick
Wall face = 1.00sqm.
Deduct for embedded portion 3x0.04x1.0 = 0.12 sqm.
= 0.88sqm.
Add wastage 5% = 0.04sqm.
Total = 0.92 sqm.
75mm thick
3x0.04x1.0 = 0.12 sqm.
Total = 0.13 sqm.
0.92x0.04 = 0.0368 cum.
0.13x0.075 = 0.0100 cum.
= 0.0468 cum. or 468 cudm.
468 cudm @ 2.3 kg/cudm = 108 kg = 0.108 tonne
Assuming 50mm thick strips 20x1.0 = 20

metre
Mortar with coarse sand 1:3 for
(a) stone backing 12mm thick = 0.0144 cum.
(b) for fixing of stone = 0.40/25 = 0.0160 cum.
Total = 0.0304 cum.
Cutting chases and making good with mortar after insurting stone etc.
18.78 Rate as per Item Number 18.78 of SH: Water 171.8 metre
9999 White cement and pigment for pointing 2.12 L.S.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
9999 Sundries and scaffolding brushes etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1sqm.
Say
8.16.1.1 8.18 Stone work (machine cut edges Veneer work) for wall lining upto 10 m height,
backing
8.18.1 Kota filled
stone withexposed
slabs a grout of 12dressed
face mm thick cement
and mortar 1:3 (1 Cement : 3 coarse
rubbed.
8.18.1.1 25 mm thick
MATERIAL
25mm thick kota stone slabs = 10 sqm.
Total = 11.50 sqm.
1169 Kotastone slab 25mm thick (rough cheseled) 250 sqm
9999 Cement mortar for pointing. 2.12 L.S.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
139 Skilled Beldar (for floor rubbing etc.) 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost of 1 sqm.
Say
8.17 8.19 Extra for stone work for wall lining on exterior walls of height more than 10 m
Code from ground level for every additional height
Description of 3 m or part Unit
Rate there of.
Analysis same as Item Number 13.74
MATERIAL
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
8.18.1 8.2 Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang
8.20.1 Redsaw sand
cut stone with
stone (machine
- 30mm thickcut edges)
gang of uniform
saw cut stone colour and size upto 1mx1m,
MATERIAL
Red sand stone = 1.00sqm
Add 5% wastage = 0.05sqm
Total = 1.05 sqm
8683 Red sand stone gang saw cut 30 mm thick 476 sqm
@ 2.30kg/cudm
Fixing Charges
LABOUR
114 Beldar 645 day
115 Coolie 645 day
1237 Cutting marble or sand stone slab up to 50 m 10 metre
9999 Fixing including weather sealant and removing 2.12 L.S.
9999 Silicon gun/ pump etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm
Say
8.18.2 8.2 Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang
saw cut
8.20.2 White stone
sand with- 30mm
stone (machine cutgang
thick edges)
sawofcut
uniform
stone colour and size upto 1mx1m,
MATERIAL
Red sand stone = 1.00sqm
Add 5% wastage = 0.05sqm
Total = 1.05 sqm
8684 White sand stone gang saw cut 30 mm thick 560 sqm
@ 2.30kg/cudm
Fixing Charges
LABOUR
114 Beldar 645 day
115 Coolie 645 day
1237 Cutting marble or sand stone slab up to 50 m 10 metre
9999 Fixing including weather sealant and removing 2.12 L.S.
9999 Silicon gun/ pump etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm
Say
8.19 8.21 Providing and fixing structural steel frame (for dry cladding with 30 mm thick
Code gang saw cut with machine cut edges sandRate
Description stone) on walls Unit
at all heights using
Details of cost for 100.78 kg.
M.S. tube 50x25x18mm
Vertical 4.0x3.0 mtr = 12.00
Vertical 4.0x3.0x0.93 =11.16 m
Total = 23.16 mtr
Add 10% wastage = 2.32 m
Total 25.48mtr @ 2.02 kg/m = 51.47 kg
4009 Mild steel tubes hot finished welded type 60 kilogra
Angle iron 50x50x6mm
16x0.60=9.60
16x0.15=2.40
Total=12.00
Add 10% wastage = 1.20m
Total=13.20m
@4.50kg/m=59.40kg or 0.594 q
1007 Structurals such as tees,angles channels and 4950 quintal
Cement concrete 1:2:4 =16x0.30x0.23x0.30=0.331 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete wo 7365.15 cum
Making holes in brick work=16nos.
LABOUR
114 Beldar 645 Day
Welding for frame welding
16x(2.5+5+2.5+5) = 240 cm
For hold fast 16x20cm = 320cm
Total = 560cm
1215 Welding by electric plant 2 cm
LABOUR
114 Beldar 645 Day
Painting with epoxy paint over and including priming coat area 22.80x0
12x0.2 = 2.40
Total = 5.82sqm
13.52.1 Rate as per Item no. 13.52.1 of SH: Finishing 201.7 sqm
9999 For labour scaffocaling etc 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 88.79 kg
Cost for 1 kg
Say
8.2 8.22 Providing and fixing adjustable stainless steel cramps of approved quality,
Code required shape and size, adjustable with stainless
Description Rate steel nuts, bolts and washer
Unit
Details of cost for 10 Nos.
8698 Stainless steel cramps(weight 260 grams) with 115 each
LABOUR
For making holes, recesses etc. and fixing of stainless steel cramps.
114 Beldar 645 Day
9999 Scaffolding, hire charges of drill machine etc. 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 10 Nos.
Cost for 1 Nos.
Say
8.21 8.23 Providing 50x50x50 mm 2nd class teak wood plugs including cutting brick work
Code and fixing in cement mortar 1:3 (1 cement :Rate
Description 3 fine sand) andUnit
making good the
MATERIAL
Teak wood (2nd class) 100x(50x50x50)mm = 0.0125cum
Add wastage @ 10% = 0.0013 cum.
Total = 0.0138 cum.
Say 14 cudm.
1189 Second class teak wood in scantling 776 10 cudm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 nos.
Cost of 1 no.
Say
8.22.1 8.24 Providing and fixing expandable fasteners of specified size with necessary
8.24.1 25 plastic
mm sleeves
long and galvanised M.S. screws including drilling holes in masonry
Details of cost of 10 nos.
MATERIAL
7312 Expandable fastner with plastic sleeve and M 10 each
9999 Labour for drilling holes and making good etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
8.24.2 32 plastic
mm sleeves
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
8.24.3 40 plastic
mm sleeves
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
8.24.4 50plastic
mm sleeves
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
8.23.1 8.25 Providing and fixing 2nd class teak wood plain lining tongued and grooved,
8.25.1 40 including
mm thick wooden plugs complete with necessary screws and priming coat on
MATERIAL
Teak wood (2nd class) 10x0.04m = 0.40cum+
Total = 0.44 cum.
Say 440 cudm.
1190 Second class teak wood in planks 791 10 cudm
1231 Extra for selected planks of second class tea 150 10 cudm
Second class teak wood plugs including cutting brick work and fixing i
8.23 Rate as per Item No.8.23 of SH:CLADDING 35.5 each
Priming coat
LABOUR
For planning and fixing
111 Carpenter 1st class 784 Day
114 Beldar 645 Day
9999 Sundries & screws etc. 2.12 L.S.
TOTAL
Add 1 % for water charges on all except (A) i.e. on (46854.03 - 2523)
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (61247.9 - 2523) =
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.25.2 25 including
MATERIAL
Teak wood 2nd class 10x0.25 = 0.25cum+
Total = 0.275 cum.
Say 275 cudm.
Priming coat
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (40639.15 - 2523)
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.25.3 20including
MATERIAL
Teak wood (2nd class) 10x0.02m = 0.20cum.+
Total = 0.22 cum.
Say 220 cudm.
Priming coat
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.25.4 12 including
Wood-
Second class teak wood 10x0.012 = 0.12 cum+
Total = 0.132 cum.
Say 132 cudm.
LABOUR
114 Beldar 645 Day
Priming coat
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.24.1 8.26 Providing and fixing in wall lining flat pressed three layer (medium density)
8.26.1 12 particle board or graded wood Pre-laminated one side decorative lamination and
mm thick
MATERIAL
Particle board (three layer medium density)
12mm thick = 10 sqm.
Add wastage @ 10% = 1 sqm.
Total = 11 sqm.
7477 Prelaminated particle board with one side deco 500 sqm
9977 Carriage of particle board 2.12 L.S.
9999 Sundries and screws 2.12 L.S.
Priming coat
LABOUR
114 Beldar 645 Day
7048 Rawl plug 50 mm (designation 10 no.) 22 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.26.2 18particle board or graded wood Pre-laminated one side decorative lamination and
mm thick
MATERIAL
18 mm thick = 10 sqm.
Total = 11 sqm.
Priming coat
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.26.3 25 particle board or graded wood Pre-laminated one side decorative lamination and
mm thick
MATERIAL
25 mm thick = 10 sqm.
Total = 11 sqm.
9999 Sundries and screws etc 2.12 L.S.
Priming coat
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.25.1 8.27 Providing and fixing specified wood frame work consisting of battens 50x25mm
fixedseasoned
8.27.1 Kiln with rawl and
plugchemically
and drillingtreated
necessary holes
hollock for rawl plug etc. including
wood
Details of cost for 5 no. battens of size
500cmx50mmx25mm = 31.25 cudm
MATERIAL
Hollock wood- 5x5.00x0.50x0.025 = 0.03125 cum
Total = 0.03281 cum
Say 33 cudm.
2505 Hollock wood in planks 402 10 cudm
LABOUR
114 Beldar 645 Day
Painting with ready mixed priming coat on ground 5x500x15 cm =3.75
9999 Labour for drilling holes steel tape sundries et 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 31.25 cudm.
Cost of 1 cum.
Say
8.26.1 8.28 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming
to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including
8.28.1 Decorative veneer facings of approved manufacture
MATERIAL
Teak ply wood = 10sqm.
Add for wastage @ 20% = 2 sqm.
Total = 12 sqm.
759 Decorative plywood 4 mm 320 sqm
9977 Carriage of ply wood 2.12 L.S.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
9999 20mm nails without head for fixing ply 2.12 L.S.
Painting with ready mixed priming coat
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.27 8.29 Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain
Code lining with necessary screws, priming coatRate
Description on unexposed surface
Unit etc., complete.
MATERIAL
Coir veneered board 4mm thick = 10sqm.
Add for wastage @ 20% = 2 sqm.
Total = 12 sqm.
7552 Coir veneered board 4mm thick 260 sqm
9977 Carriage of Coir veneered board 2.12 L.S.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
9999 20mm nails without head for fixing ply 2.12 L.S.
Priming coat Painting with ready mixed priming coat
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
8.28.1 8.3 Providing and fixing skirting with Pre-laminated (one side decorative and other
8.30.1 18 side balancing
mm thick lamination) flat pressed 3 layer or graded particle board (medium
Details of cost for skirting 200mm wide and 30m long Area = 0.2x30=
Area = 0.2x30= 6 sqm.
MATERIAL
Teak shade prelaminated Particle board
(three layer medium density) = 6.0 sqm.+
Add wastage @ 10% = 0.6sqm.
Total = 6.6 sqm.
9999 Labour for drilling holes 2.12 L.S.
LABOUR
For dressing and fixing particle board to skirting
114 Beldar 645 Day
9999 Sundries (Screws, sand paper) 2.12 L.S.
Painting with ready mixed priming coat at back
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6 sqm.
Cost of 1 sqm.
Say
8.28.2 8.3 Providing and fixing skirting with Pre-laminated (one side decorative and other
8.30.2 25 side balancing
mm thick lamination) flat pressed 3 layer or graded particle board (medium
Details of cost for skirting 200mm wide and 30m long Area = 0.2x30=
Area = 0.2x30= 6 sqm.
MATERIAL
Teak shade prelaminated Particle board
(three layer medium density) = 6.0 sqm.+
Total = 6.6 sqm.
9999 Labour for drilling holes 2.12 L.S.
LABOUR
For dressing and fixing particle board to skirting
114 Beldar 645 Day
9999 Sundries (Screws, sand paper) 2.12 L.S.
Painting with ready mixed priming coat at back
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6 sqm.
Cost of 1 sqm.
Say
8.29 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
Code (thickness to be specified by the manufacturer),
Description Rate of approved make, in all colours
Unit
MATERIAL
Ceramic Glazed tiles = 1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm
Total = 1.025 sqm
7800 Ceramic Glazed Tiles Ist quality minimum thic 190 sqm
12 mm thick Cement mortar 1:3 (1 cement : 3 coarse sand)
Cement for slurry over bed @ 3.3 kg per

sqm
LABOUR
115 Coolie 645 Day
9988 Sundries including carriage of cement etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
8.3 8.32 Designing, fabricating, testing, installing and fixing in position Curtain Wall with
Code Aluminium Composite Panel Cladding, withRate
Description open grooves for linear as well as
Unit
Width of the unit 1.6 m

Height of the unit 4.2 m
Area of Single Unit 6.72 sqm
Total Area 6.72 sqm
No of Panels 1 no
Area i/c wastage @ 5% = 7.06 sqm
MATERIALS
2607 Weather Sealant - Non Staining (600 ml) 332 each
2608 Weather Sealant - Normal (300 ml) 102 each
2609 MS Brackets/Aluminium Alloy Brackets 104 kg
2611 EPDM Gasket in Kg (Above 60 g / m) 156 kg
2612 Anchor Fastner - M10 11 each
2613 SS Bolt with washer of sizes for structural gl 37 each
2614 SS Screws of sizes for structural glazing / A 4 each
2615 Protective Tape 22 metre
2630 Baker rod 6 metre
2616 GI flashing - 1.2 mm Thick 61 kg
2631 4 mm thick ACP 1100 sqm
9999 Sundries (For Fabrication) 2.12 L.S.
9999 Sundries (For Installation) 2.12 L.S.
9999 Sundries (Scaffolding / Loading / Unloading) 2.12 L.S.
9999 Sundries (Transporation) 2.12 L.S.
9999 Sundries (Designing charges etc.) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
9.1.1 9.1 Providing wood work in frames of doors, windows, clerestory windows and other
9.1.1 frames, wrought
Second class teak framed
wood and fixed in position with hold fast lugs or with dash
Details of cost for Chowkhat of a door 206.75x117.5cm
MATERIAL
Superior class teakwood such as Dandeli Balarshah or Malabar
2x206.75x9.5x7.0cm =0.028cum+
1x117.5x9.5x7.0cm = 0.008cum.
= 0.036cum.+
Add for wastage @ 5% = 0.002cum.
Grand Total = 0.038cum = 38 cudm
LABOUR
156 Carpenter (average) 749 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36 cudm.
Cost per cum.
Say
9.1.2 frames,
Sal wood wrought framed and fixed in position with hold fast lugs or with dash
Details of cost for Chowkhat of a door 206.75x117.5cm.
MATERIAL
Salwood
2x206.75x9.5x7.0cm =0.028cum+
1x117.5x9.5x7.0cm = 0.008cum.
= 0.036cum.+
Grand Total = 0.038cum = 38cudm
1199 Sal wood in scantling 600 10 cudm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36 cudm.
Cost per cum.
Say
9.1.3 frames,
Kiln wrought
seasoned andframed and fixed
chemically in position
treated hollock with
wood hold fast lugs or with dash
MATERIAL
Hollock wood
2x206.75x9.5x7.0cm =0.028cum+
1x117.5x9.5x7.0cm = 0.008cum.
= 0.036cum.+
2466 Hollock wood in scantling 357 10 cudm
2504 Kiln seasoning of timber 772 cum
9999 Chemical treatment 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36 cudm.(finished work)
Cost per cum.
Say
9.2 9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001
Code (Part B) in factory made frames of doors, windows,
Description Rate clerestory
Unitwindows and other
MATERIAL
Laminated veneer lumber including wastage @ 5%
2x206.75x9.5x7.0cm =0.028cum+
1x117.5x9.5x7.0cm = 0.008cum.
= 0.036cum.+
7157 Laminated veneer lumber confirming to TADS 700 10 cudm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36 cudm
Cost of 1 cum
Say
9.3.1 9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in
position with necessary stainless steel screws etc.
9.3.1 Sal wood
Details of cost for ceiling for a room 3x3m
MATERIAL
Salwood
= 6x3.30x(50/1000)x(125/1000)= 0.1238 cum. +
Cross battens 60mm centre to center 38x50mm.
6x3x(38/1000)x50/1000)=0.0342 cum.
= 0.1580 cum.+
Add for wastage @ 5% = 0.0079 cum.
= 0.1659 cum. say 166 cudm.
LABOUR
114 Beldar 645 Day
9999 Sundries screws etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 158 cudm.
Cost per cum.
Say
9.3.2 9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in
9.3.2 position
Kiln with necessary
seasoned stainless
and chemically steelhollock
treated screwswood
etc.
Details of cost for ceiling for a room 3x3m
MATERIAL
Hollock wood
= 6x3.30x(50/1000)x(125/1000)= 0.1238 cum. +
Cross battens 60mm centre to center 38x50mm.
6x3x(38/1000)x50/1000)=0.0342 cum.
= 0.1580 cum.+
= 0.1659 cum. say 166 cudm.
LABOUR
114 Beldar 645 Day
9999 Sundries screws etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 158 cudm (finished work)
Cost per cum.
Say
9.4.1 9.4 Extra for additional labour for circular works, such as in frames of fan light
9.4.1 Second class teak wood
Extra Materials and labour for wastage @ 10% on quantity of item no 9
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36 cudm.
Cost per cum.
Say
9.4.2 Sal wood
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36 cudm.
Cost per cum.
Say
9.4.3 Kiln seasoned and chemically treated hollock wood
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36 cudm.(finished work)
Cost per cum.
Say
9.5.1.1 9.5 Providing and fixing panelled or panelled and glazed shutters for doors, windows
9.5.1 and clerestory
Second windows,
class teak wood including ISI marked M.S. pressed butt hinges bright
9.5.1.1 35 mm thick shutters
Details of cost for shutters of a Door
(1/3rd glazed and 2/3rd panelled) 200x108cm = 2.16 sqm)
MATERIAL
Teak wood
Styles 4x200x10.0x3.5cm = 0.028cum+
Rails
Top rails 1x110.5x10.0x3.5cm = 0.004cum.+
Bottom rails 1x110.5x20x3.5cm = 0.008cum+
Lock rails 1x110.5x15x3.5cm = 0.006cum+
Beading 2x186.1x1.9x1.2cm = 0.001cum.
Total = 0.047 cum+
Add for wastage @ 10% = 0.005cum
Grand Total = 0.051 cum = 51 cudm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Second windows,
class teak wood including ISI marked M.S. pressed butt hinges bright
MATERIAL
Teak wood
Styles : 4x200x10.0x3.0cm = 0.024 cum+
Top rails :1x110.5x9.5x3.0cm = 0.003cum+
Bottom rails : 1x110.5x19.7x3.0cm = 0.007cum+
Lock rails : 1x110.5x15.0x3.0cm = 0.005cum+
Beading : 2x186.1x1.9x1.2cm = 0.001 cum.
Total = 0.040 cum. +
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Kiln seasoned and windows, including
chemically ISI marked
treated M.S. pressed butt hinges bright
hollock wood
MATERIAL
Hollock wood
Rails
Bottom rails 1x110.5x20x3.5cm = 0.008cum+
Total = 0.047 cum+
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Kiln seasoned and windows, including
chemically ISI marked
treated M.S. pressed butt hinges bright
hollock wood
Details of cost for shutters of a door
(1/3rd glazed and 2/3rd panelled)
200x108cm = 2.16sqm.
MATERIAL
Hollock wood
Rails
Bottom rails 1x110.5x19.7x3.0cm = 0.007cum+
Beading 2x186.1x1.9x1.2cm = 0.001cum
Total = 0.040 cum.+
Grand Total = 0.044 cum or = 44 cudm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Kiln windows,planks
seasoned selected including ISI markedwood
of sheesham M.S. pressed butt hinges bright
MATERIAL
Sheesham wood
Rails
Total = 0.047 cum+
1200 Kiln seasoned selected sheesum wood planks 650 10 cudm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Kiln windows,planks
seasoned selected including ISI markedwood
of sheesham M.S. pressed butt hinges bright
Details of cost for shutters of a door
(1/3rd glazed and 2/3rd panelled)
200x108cm = 2.16sqm.
MATERIAL
Sheesham wood
Rails

Lock rails 1x110.5x15.0x3.0cm = 0.005cum+
Bottom rails 1x110.5xl9.7x3.0cm =
0.007cum+
Beading 2x186.1xl.9xl.2cm = 0.001cum
Total = 0.040 cum.+
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.6.1 9.6 Providing and fixing 35 mm thick factory made laminated veneer lumber door
9.6.1 shutter
12 conforming
mm thick to IS -1,
plain grade : 14616 anddensity
medium TADS 15:2001 (Part three
flat pressed B), including ISI marked
layer particle
board FPT - I or graded wood particle board FPT- I, IS : 3087 marked, bonded with
Details of cost of one shutter
220x108cm = 2.38sqm.
MATERIAL
7137 Factory made 35 mm thick shutters with lamina 1620 sqm
as per IS:848-1974 as per TADS 15:1995 and panels of 12 mm thick plai
9977 Carriage of shutters 2.12 L.S.
Fittings :
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.6.2 shutter conforming
12 mm thick to IS : 14616
pre-laminated and
particle TADS
board 15:2001 (Part
(decorative B), including
lamination ISIsides)
on both marked
Code grade -1, medium density flat pressed, three
Description layer particle board
Rate Unit FPT- I or graded
220x108cm = 2.38sqm.
MATERIAL
as per TADS 15:1995 and panels of 12 mm thick both sides prelaminated
Fittings :
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.6.3 shutter
12 conforming
mm thick one sidetoPre-laminated
IS : 14616 andparticle
TADS 15:2001 (Part B), including
board (decorative ISI marked
lamination on one
Code side and other sides balancing lamination) Rate
Description grade -1, medium density flat
Unit
220x108cm = 2.38sqm.
MATERIAL
as per TADS 15:1995 and panels of 12 mm thick one side prelaminated t
Fittings :
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.7.1 9.7 Providing and fixing panelling or panelling and glazing in panelled or panelled
9.7.1 and glazed
Second shutters
class for doors, windows and clerestory windows (Area of opening
teak wood
Details of cost for shutters of a door with 2/3rd panelling 200x108cm =
Panel area = 4x45.1x36.55cm = 0.66 sqm
MATERIAL
Panels
4x47.2x38.65x1.6cm = 0.0117cum+
= 0.0129 cum.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.2 and glazed
Kiln seasonedshutters for doors, treated
and chemically windows and clerestory
hollock wood windows (Area of opening
Details of cost for shutters of a door 200x108cm = 2.16 sqm.
Panel area 4x45.1x36.55cm=0.66sqm.
MATERIAL
Hollock wood
panels 4x45.1x36.55cm = 0.0117 cum+
= 0.0129 cum = 12.90 cudm
Labour & sundries
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.3.1 9.7 Providing and fixing panelling or panelling and glazing in panelled or panelled
9.7.3 andwood
Ply glazed
5 shutters
ply, 9 mmfor doors, windows and clerestory windows (Area of opening
thick
9.7.3.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328
BWR type
Details of cost for shutters of a door with 2/3rd panelling
200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.66sqm.
MATERIAL
Plywood (9mm thick)

4x47.2x38.65cm = 0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
2480 Ply wood 5 ply with teak ply on both faces 9 884 sqm
9977 Carriage of Plywood 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.3 andwood
Ply glazed 5 shutters
thick
9.7.3.2 Decorative plywood one side decorative veneer and commercial veneer on other
Code face (Type 1) conforming to IS 1328 BWR Type
Details of cost for shutters of a door with 2/3rd panelling.
200x108cm = 2.16sqm.
MATERIAL
Plywood (9mm thick)

4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
2481 Ply wood 5 ply with teak ply on one face and 905 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.4 andwood
Ply glazed 7 shutters
thick
9.7.4.1 Decorative plywood one side decorative veneer and commercial veneer on other
Code face (Type 1) conforming to IS 1328 BWR Type
MATERIAL
Plywood (9mm thick)

4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
2483 Ply wood 7 ply with teak ply on one face and 1010 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.5 and glazed
Particle shutters
Board 12 mm forthick
doors, windows and clerestory windows (Area of opening
9.7.5.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium
Code density Grade I, IS : 3087 marked
MATERIAL
Particle Board
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
341 Flat pressed 3 layer particle board (medium d 288 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.5 and glazed
Particle shutters
9.7.5.2 Veneered flat pressed three layer or graded wood particle board with commercia
Code veneering on both sides conforming to IS:3097,
Description Rate grade I Unit
MATERIAL
Particle Board
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm
7468 Veneered particle board with commercial vene 480 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.5 and glazed
Particle shutters
9.7.5.3 Pre-laminated particle board with decorative lamination on one side and
Code balancing lamination on other side, Grade I,
Description Type II IS: 12823
Rate marked
Unit
200x108cm = 2.16sqm.
MATERIAL
Particle Board
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.5 and glazed
Particle shutters
9.7.5.4 Pre-laminated particle board with decorative lamination on both sides, Grade I,
Code Type II, IS:12823 marked
200x108cm = 2.16sqm.
MATERIAL
Particle Board
4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm
7480 Prelaminated particle board with both sides de 490 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.6 and glazed
Coir Veneershutters for doors, windows
Board (conforming and clerestory windows (Area of opening
to IS 14842)
9.7.6.1 12 mm thick
Details of cost for shutters of a door with 2/3 rd panelling
200x108cm = 2.16 sqm
Panel area 4x45.1x36.55cm=0.66sqm
MATERIAL
Coir veneered board 12mm thick

4x47.2x38.65cm = 0.73sqm
Add for wastage @ 10% = 0.07sqm
Total = 0.80 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.7 and glazed
Float glass shutters
panes for doors, windows and clerestory windows (Area of opening
9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm).
200x108cm = 2.16 sqm
MATERIAL
Float glass sheet of nominal thickness 4 mm 4x47.2x38.65cm = 0.73s
Total = 0.80 sqm
2406 Float glass sheet of nominal thickness 4 mm ( 309 sqm
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.7 and glazed
Float glass shutters
panes for doors, windows and clerestory windows (Area of opening
9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).
200x108cm = 2.16 sqm
MATERIAL
Float glass sheet of nominal thickness 5.5 mm 4x47.2x38.65cm = 0.7
Total = 0.80 sqm
2407 Float glass sheet of nominal thickness 5.5 mm 515 sqm
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.7.8 andproof
Fly glazed shutterssteel
stainless for doors,
grade windows and clerestory
304 wire gauge windows
with 0.5 mm (Area
dia. wire of1.4mm
and opening
Code wide aperture with matching wood beadingRate
Description Unit
200x108cm = 2.16 sqm
MATERIAL
Stainless steel wire guage
4x47.2x38.65cm = 0.73sqm
Total = 0.80 sqm
8737 Stainless steel wire guage (Grade-304) apert 413 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.8.1.1 9.9 Providing and fixing glazed shutters for doors, windows and clerestory windows
9.9.1 using 4 mm
Second thick
class teakfloat
woodglass panes, including ISI marked M.S. pressed butt
9.9.1.1 35 mm thick
Details of cost for shutter of a door (glazed) 2000x108cm = 2.16 sqm.
MATERIAL
Teak wood (2nd class)
Styles : 4x200x9.5x3.5cm = 0.027cum
Rails
Top & intermediate rails
2x110.5x9.5x3.5cm = 0.008cum
Lock and bottom rails
2x110.5x19.7x3.5cm = 0.015cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.053 cum.
595 Bright finished or black enamelled mild steel 80 10 Nos
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.1 using 4 mm
Second thick
class teakfloat
woodglass panes, including ISI marked M.S. pressed butt
9.9.1.2 30 mm thick
Details of cost for shutter of a door (glazed) 2000x108cm = 2.16 sqm.
MATERIAL
Teak wood
Styles : 4x200x9.5x3.0cm = 0.023cum+
Rails
2x110.5x9.5x3.0cm = 0.006cum+
2x110.5x19.7x3.0cm = 0.013cum+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.045 cum.+
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.2 using
Kiln 4 mm thick
seasoned andfloat glass panes,
chemically treatedincluding
hollock ISI
woodmarked M.S. pressed butt
9.9.2.1 35 mm thick
Details of cost for shutters of a door (glazed) 200x108cm = 2.16 sqm.
MATERIAL
Hollock wood
Styles :
4x200x9.5x3.5cm = 0.027cum+
Rails
2x110.5x9.5x3.5cm = 0.008cum+
2x110.5x19.7x3.5cm = 0.015cum.+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.053 cum.+
9999 (iii) Chemical treatment 2.12 L.S.
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.2 using
Kiln 4 mm thick
seasoned andfloat glass panes,
chemically including
treated hollock ISI
woodmarked M.S. pressed butt
9.9.2.2 30 mm thick
Details of cost for shutter of door (glazed) 2000x108cm = 2.16 sqm.
MATERIAL
Hollock wood
Styles : 4x200x9.5x3.0cm = 0.023cum+
Rails
2x110.5x19.7x3.0cm = 0.006cum+
2x110.5x19.7x3.0cm = 0.013cum+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.045 cum.+
Grand Total = 0.050 = 50 cudm
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.3 using
Kiln 4 mm thick
seasoned float glass
selected plankspanes, includingwood
of sheesham ISI marked M.S. pressed butt
9.9.3.1 35 mm thick
Details of cost for shutters of a door (glazed) 200x108cm = 2.16 sqm.
MATERIAL
Sheesham wood
Styles :
4x200x9.5x3.5cm = 0.027cum+
Rails
2x110.5x9.5x3.5cm = 0.008cum+
2x110.5x19.7x3.5cm = 0.015cum.+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.053 cum.+
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.3 using
Kiln 4 mm thick
seasoned float glass
selected panes,
planks includingwood
of sheesham ISI marked M.S. pressed butt
9.9.3.2 30 mm thick
Details of cost for shutter of door (glazed) 2000x108cm = 2.16 sqm.
MATERIAL
Sheesham wood
Styles : 4x200x9.5x3.0cm = 0.023cum+
Rails
2x110.5x19.7x3.0cm = 0.006cum+
2x110.5x19.7x3.0cm = 0.013cum+
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.045 cum.+
Grand Total = 0.050 = 50 cudm
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.9.1 9.1 Providing and fixing factory made laminated veneer lumber glazed shutter
9.10.1 30 conforming
mm thickto IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass
shutters
220x108cm = 2.38sqm.
MATERIAL
7151 Factory made 30 mm thick shutters with lamin 1620 sqm
Fittings :
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.10.1 9.11 Extra for providing heavy sheet float glass panes instead of ordinary float glass
9.11.1 5.0in glazed doors,
mm thick windows
instead and thick.
of 4 mm clerestory window shutters. (Area of opening for
Details of cost for one sqm.
MATERIAL
Deduct
Total
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
9.11 9.12 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass
Code panes 4 mm thick in doors, windows and clerestory
Description Rate windowUnit
shutters. (Area of
Cost for 1 sqm.
MATERIAL
7032 Frosted glass sheet of nominal thickness 4 m 420 sqm
Deduct
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
9.12 9.13 Deduct for providing pin headed glass panes instead of ordinary float glass
Code panes weighing 4 mm thick in doors, windows
Description Rateand clerestory windows shutters
Unit
Cost for 1 sqm.
MATERIAL
Deduct
7451 Glass sheet (Pin headed) 4 mm thick 345 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
9.13 9.14 Extra for providing ISI marked Stainless Steel butt hinges instead of M.S.
Code pressed butt hinges bright finished of required
Description Rate size with necessary
Unit screws.
Details of cost for one door shutter of a door
200x108cm = 2.16 sqm.
8220 Stainless steel butt hinges (heavy weight) 1 275 10 Nos
8218 Stainless steel butt hinges 50x37x1.5 mm IS 150 10 Nos
8211 Stainless steel screws 40 mm 250 100 Nos
Deduct
Black enameled Iron
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16sqm.
Cost on 1 sqm.
Say
9.14.1.1 9.15 Deduct for not providing hinges in doors, windows or clerestory window shutters
with :
9.15.1 Stainless steel butt hinges with stainless steel screws :
9.15.1.1 For 2nd class teak wood and other class of wood shutters
Details of cost of fittings for shutter of size 200x108cm = 2.16 sqm.
MATERIAL
Anodised aluminum butt hinges
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.14.2.1 9.15 Deduct for not providing hinges in doors, windows or clerestory window shutters
with
9.15.2 ISI :
marked M.S. pressed butt hinges bright finished of required size.
9.15.2.1 For 2nd class teak wood and other class of wood shutters
Details of cost of hinges with screws for shutters of size 200x108cm =
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.15.1.1 9.16 Providing and fixing 25 mm thick shutters for cup board etc. :
9.16.1 Panelled or panelled & glazed shutters :
9.16.1.1 Second class teak wood including ISI marked anodised aluminium butt hinges
Code with necessary screws
Details of cost for shutters of a cup-board (half glazed and half pane
MATERIAL
Styles-
4x200x8.0x2.5cm = 0.016 cum+
Rails-
Top rail-
1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail-
2x110.5x8.0x2.5cm = 0.0044 cum.
Panels-
2x48x41x1.6cm = 0.006cum+
Sash bars-
2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-
16x92x1.4x1.2cm = 0.002cum
Total = 0.0366
Grand Total = 0.0403 cum or 40 cudm
Fittings-
694 Anodised Aluminium butt hinges 75x45x3.2 196 10 Nos
586 Chromium plated Brass screws 40 mm 290 100 Nos
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.16.1.2 Second class teak wood including iSi marked nickel plated bright finished M.S.
Code piano hinges with necessary screws
MATERIAL
Styles-
4x200x8.0x2.5cm = 0.016 cum+
Rails-
Top rail-
1x110.5x8.0x2.5cm = 0.0022cum+
2x110.5x8.0x2.5cm = 0.0044 cum.
Panels-
2x48x41x1.6cm = 0.006cum+
Sash bars-
2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-
16x92x1.4x1.2cm = 0.002cum
Total = 0.0366
Fittings-
608 Nickel plated mild steel piono hinges 1 mm t 39 metre
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.16.2 Glazed shutters :
9.16.2.1 Second class teak wood including ISI marked anodized aluminium butt hinges
Code with necessary screws
Details of cost for shutter of cup-board 2000x108cm = 2.16 sqm.
MATERIAL
(i) Teak wood second class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
2x110.5x9.5x2.5 cm = 0.006 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.
Grand Total = 0.043 cum. 43 cudm
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.16.2.2 Second class teak wood including ISI marked nickel plated bright finished M.S.
Code piano hinges with necessary screws
MATERIAL
(i) Teak wood second class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
2x110.5x9.5x2.5 cm = 0.006 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.16.1 9.17 Providing and fixing flat pressed 3 layer particle board medium density exterior
9.17.1 12 grade
mm(Grade
thick I) or graded wood particle board IS : 3087 marked, to frame,
Details of cost for 350x200cm = 7sqm.
MATERIAL
12mm thick particle board = 7.00sqm.+
Add wastage @ 5% = 0.35 sqm.
Total = 7.35 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7 sqm.
Cost of 1 sqm.
Say
9.16.2 9.17 Providing and fixing flat pressed 3 layer particle board medium density exterior
9.17.2 18grade
mm(Grade
thick I) or graded wood particle board IS : 3087 marked, to frame,
Details of cost for 350x200cm = 7sqm.
MATERIAL
12mm thick particle board = 7.00sqm.+
Total = 7.35 sqm
7055 Flat pressed 3 layer and graded particle boar 430 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7 sqm.
Cost of 1 sqm.
Say
9.17.1 9.18 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle
9.18.1 18 board
mmor graded wood particle board IS : 3087 marked, with one side decorative
thick
Details of cost for 4 nos.
75x20cm shelves = 0.60 sqm.
MATERIAL
18mm thick particle board
4x75x20cm = 0.60sqm.
Total = 0.63 sqm
9977 Carriage of board 2.12 L.S.
LABOUR
114 Beldar 645 Day
9999 Sundries, Painting edges & Screws 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm.
Cost per sqm.
Say
9.17.2 9.18 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle
9.18.2 25 board
mmor graded wood particle board IS : 3087 marked, with one side decorative
thick
75x20cm shelves = 0.60 sqm.
MATERIAL
25mm thick particle board
4x75x20cm = 0.60sqm.
Total = 0.63 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm.
Cost per sqm.
Say
9.18.1 9.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part
9.20.1 I) 35decorative type, coreISI
mm thick including of marked
block board construction
Stainless with
Steel butt frame
hinges of 1st
with class hard
necessary
Code screws
MATERIAL
713 Block board construction flush door with teak 1800 sqm
9977 Carriage of door 2.12 L.S.
LABOUR
For fixing shutter and fittings
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.20.2 I) 30decorative type, coreISI
mm thick including of marked
block board construction
Stainless with
Steel butt frame
hinges of 1st
with class hard
necessary
Code screws
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.20.3 I) 25decorative type,cupboard)
mm thick (for core of block boardISI
including construction withplated
marked nickel framebright
of 1st finished
class hard
Code M.S. Piano hinges IS : 3818 marked with necessary
Description Rate screws Unit
MATERIAL
Fittings-For a door 2.2x1.0m = 2.20 sqm.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.21.1 35 I) non-decorative type, ISI
mm thick including core of block
marked board construction
Stainless with frame
Steel butt hinges of 1st class
with necessary
Code screws
MATERIAL
717 Block board construction flush door with comm 1000 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
I) non-decorative type, core of block board construction with frame of 1st class
9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary
Code screws
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.21.3 I) 25non-decorative type, core including
mm thick (for cupboard) of block board construction
ISI marked with frame
nickel plated brightoffinished
1st class
Code M.S. piano hinges with necessary screws Rate
Description Unit
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.20.1 9.22 Extra for Providing and fixing flush doors with decorative veneering instead of
9.22.1 On nonone
decorative
side onlyISI marked flush door shutters conforming to IS: 2202 (Part I)
7307 For flush door shutters Extra for providing t 305 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm.
Say
9.21 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum
Code depth on all edges of flush door shutters (over
Description Rateall area of door
Unitshutter to be
Details of cost for 1 sqm. of door area
752 Block board construction flush door lipping 300 sqm of
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
9.22.1 9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors
(cost of glassorexcluded)
9.24.1 Rectangular square (overall area of door shutter to be measured):
753 Square vision panel (upto 0.10 sqm) in Block 130 sqm of
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm.
Say
9.22.2 9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors
(cost of glass excluded) (overall area of door shutter to be measured):
9.24.2 Circular
754 Circular vision panel (upto 0.10 sqm) in Block 135 sqm of
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm.
Say
9.23.1 9.25 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters
(overall areatype
9.25.1 Decorative of door
doorshutters to be measured).
755 Decorative type Louvers (upto 0.20 sqm) in Bl 265 sqm of
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm.
Say
9.24 9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be
Code measured).
757 Rebate cutting in Block board construction flu 70 sqm of
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm.
Say
9.25.1.1.1 9.27 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of
9.27.1 35 average width
mm thick of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for
shutters
9.27.1.1 with ISI marked M.S. pressed butt hinges bright finished of required size
9.27.1.1. Second class teak wood
Details of cost for door shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Top Rail - 1x110.5x9.5x3.5cm = 0.0036cum+
Lock and bottom rail
2x110.5x19.7x3.5cm = 0.0152 cum.+
Beadings - (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.0464 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Wire gauge 2x160x40cm = 1.28 sqm.+
Total = 1.41 sqm.
7029 Galvanised wire mesh of average width of ape 250 sqm
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
9.27.1.1. Kiln seasoned and chemically treated hollock wood
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
9.27.1.1. Kiln seasoned selected class of sheesham wood
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
9.27.1.2 With ISI marked stainless steel butt hinges of required size
2.00x1.08m = 2.16 sqm.
MATERIAL
Second class Teak wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.26.1 9.31 Providing and fixing wire gauge laminated veneer lumber shutters conforming to
9.31.1 35 IS :mm
14616, and
thick as per TADS 15 :2001 (Part B) using galvanised wire gauge with
shutters
220x108cm = 2.38sqm.
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.26.2 9.31 Providing and fixing wire gauge laminated veneer lumber shutters conforming to
9.31.2 30 IS :mm
14616, and
thick as per TADS 15 :2001 (Part B) using galvanised wire gauge with
shutters
220x108cm = 2.38sqm.
MATERIAL
Fittings :
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
9.27.1.1 9.4 Providing and fixing wooden moulded beading to door and window frames with
9.40.1 2ndiron class
screws, plugs
teak woodand priming coat on unexposed surface etc. complete :
9.40.1.1 50x12 mm
Details of cost for beading for a window of size 140x110cm i.e. 500cm
MATERIAL
Teak wood IInd class in planks
500x5x1.2cm = 0.003 cum+
Total = 0.0033 cum. Say 3.3 cudm.
Painting with priming coat Area = 500(5+1.2+1.2) = 0.37 sqm
LABOUR
For plaining, fixing and making design
TOTAL
Add 1 % for water charges on all except (A) i.e. on (719.88 - 21.11) =
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (946.77 - 21.11) = 9
Cost of 5 m.
Cost of 1 metre
Say
9.40.1 2ndiron class
screws, plugs
teak woodand priming coat on unexposed surface etc. complete :
9.40.1.2 50 x 20 mm
Details of cost for beading of a window of size 140x110cm i.e. 500cm.
MATERIAL
Teak wood IInd class in planks
500x5x2.0cm = 0.005cum+
Painting with priming coat Area = 500(5+2+2) = 0.45 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 m.
Cost of 1 metre
Say
iron seasoned
9.40.2 Kiln screws, plugsand and primingtreated
chemically coat onhollock
unexposed
woodsurface etc. complete :
9.40.2.1 50x12 mm
MATERIAL
Hollock wood
500x5x1.2cm = 0.003 cum+
Painting with priming coat Area = 500(5+1.2+1.2) = 0.37 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 m.
Cost of 1 metre
Say
iron seasoned
9.40.2 Kiln screws, plugs
and and primingtreated
chemically coat onhollock
unexposed
woodsurface etc. complete :
9.40.2.2 50x20 mm
MATERIAL
Hollock wood
500x50x200mm = 0.005 cum
Painting with priming coat Area = 500(5+2+2) = 0.45 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 m.
Cost of 1 metre
Say
9.28.1 9.41 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to
be paid separately),
9.41.1 Second including fixing 50x12 mm beading complete with :
class teak wood
Details of cost of a jaffri 200x110cm = 2.2sqm.
MATERIAL
Teakwood IInd class
Jaffri 210x120x1.0cm = 0.025cum.+
Beading 660x5x1.2cm = 0.004cum.
Total = 0.029 cum.+
Total = 0.032 cum. Say 32 cudm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.2 sqm.
Cost of 1 sqm.
Say
9.29 9.42 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or
Code graded wood particle board medium density
Description grade I, IS : 3087
Rate Unitmarked, including
Details of cost for a pelmet 2m long
MATERIAL
(i) 18mm thick particle board (medium density exterior grade)
Front-1x1.7x0.15= 0.255sqm.+
Sides-2x0.15x0.15= 0.045sqm.
Total = 0.300sqm.+
Total = 0.315sqm. Say 0.32 sqm.
7055 Flat pressed 3 layer and graded particle boar 430 sqm
6mm thick commercial ply wood
Top-1x1.7x0.15= 0.255sqm.+
= 0.268 sqm. Say 0.27 sqm.
2412 Ply wood 5 ply with commercial ply on both f 306 sqm
7034 Nickle plated M.S. pipe 20 mm dia. 72 metre
7035 Nickle plated M.S. Brackets for curtain rod 2 7 each
9999 M.S. flat 25x3mm and 10cm long over bracket 2.12 L.S.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 m
Cost of 1 metre
Say
9.3 9.43 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI
Code marked IS : 14842, including top cover of 6Rate
Description mm coir veneer Unit
board, nickle plated
MATERIAL
(i) 18mm thick Coir veneered board
Front-1x1.7x0.15= 0.255sqm.+
Sides-2x0.15x0.15= 0.045sqm.
Total = 0.300sqm.+
6mm thick commercial ply wood
Top-1x1.7x0.15= 0.255sqm.+
Total = 0.268 sqm. Say 0.27 sqm.
9999 M.S. flat 25x3mm and 10cm long over bracket 2.12 L.S.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 m
Cost of 1 metre
Say
9.31.1 9.44 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of
pelmet
9.44.1 Non 18mm thick
decorative 150mm
veneer wide.
on both sides
MATERIAL
Front-1x1.7x0.15= 0.255sqm.+
Sides-2x0.15x0.15= 0.045sqm.
Total = 0.300sqm.+
347 Extra for veneered particle board with : Comm 155 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2m
Cost of 1 metre
Say
9.31.2 9.44 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of
pelmet 18mm
9.44.2 Particle boardthick 150mm wide.
with decorative veneering on both sides
MATERIAL
Front-1x1.7x0.15= 0.255sqm.+
Sides-2x0.15x0.15= 0.045sqm.
Total = 0.300sqm.+
348 Extra for veneered particle board with : Teak 500 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2m
Cost of 1 metre
Say
9.32 9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet.
Details of cost for 10 metre
MATERIAL
7049 Teak wood lipping of size 25x3 mm in pelmets 12 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 meter
Cost of 1 metre
Say
9.33.1 9.46 Providing and fixing chromium plated brass curtain rod having wall thickness of
9.46.1 12 1.25mm
mm diawith two chromium plated brass brackets fixed with C.P. brass screws
Details of cost for 2m long
MATERIAL
590 Chromium plated Brass curtain rod 12 mm dia 185 metre
7023 Chromium plated brackets ( curtain rods) 8 each
9999 C.P. brass screws 2.12 L.S.
458 PVC sleeves for screw 2 each
9999 LABOUR 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2m
Cost of 1 metre
Say
1.25mm with two chromium plated brass brackets fixed with C.P. brass screws
9.46.2 20 mm dia
MATERIAL
9999 LABOUR 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2m
Cost of 1 metre
Say
9.46.3 25 1.25mm
mm diawith two chromium plated brass brackets fixed with C.P. brass screws
MATERIAL
9999 LABOUR 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2m
Cost of 1 metre
Say
9.34.1 9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated
9.47.1 20 brackets
mm dia: (heavy type)
Details of cost for 2m long.
MATERIAL
9999 Screws 2.12 L.S.
9999 Labour including fixing rawl plug 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2 meter
Cost of 1 metre
Say
9.34.2 9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated
9.47.2 25 brackets
mm dia: (heavy type)
Details of cost for 2m long.
MATERIAL
7033 Nickel plated M.S. pipe 25mm dia 76 Metre
9999 Screws 2.12 L.S.
9999 Labour including fixing rawl plug 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2 meter
Cost of 1 metre
Say
9.35.1 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with
M.S. flats,
9.48.1 Fixed square
to steel or round
windows bars etc. including priming coat with approved steel
by welding
Details of cost for a grill 90x120cm = 1.08sqm.
MATERIAL
M.S. bar 16mm dia. metre- 11x86cm = 9.46m.
@ 1.58kg/m = 14.95kg+
Total = 16.45kg. Say 0.165q
1003 Mild steel round bar above 12 mm dia 4750 quintal
M.S. flat 25x3.15mm
2x120cm = 2.40m+
2x90cm = 1.80m+
1x120cm = 1.20m+
2x15cm = 0.30m
Total =5.70m
5.70m @ 0.63kg/m = 3.59kg+
Total = 3.95kg. Say 4 kg. or 0.04q
0.165 + 0.04 = 0.205 q = 0.0205 t Say 0.02

tonne
9999 Welding charges 2.12 L.S.
Priming coat:
Area=1x0.9x1.2x1=1.08 sqm
13.50.3 Rate as per Item No.13.50.3 of SH:Finishing 55.5 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 18.54 kg.
Cost for 1 kg.
Say
9.35.2 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with
M.S. flats,
9.48.2 Fixed square or
to openings round bars
/wooden etc.with
frames including priming
rawl plugs coatetc.
screws with approved steel
Details of cost for a grill 90x120cm = 1.08sqm.
MATERIAL
M.S. bar 16mm dia. metre- 11x86cm = 9.46m.
@ 1.58kg/m = 14.95kg+
Total = 16.45kg. Say 0.165q
M.S. flat 25x3.15mm
2x120cm = 2.40m+
2x90cm = 1.80m+
1x120cm = 1.20m+
2x15cm = 0.30m
Total =5.70m
5.70m @ 0.63kg/m = 3.59kg+
Total = 3.95kg. Say 4 kg. or 0.04q
0.165 + 0.04 = 0.205 q = 0.0205 t Say 0.02

tonne
9999 Welding charges 2.12 L.S.
Priming coat:
Area=1x0.9x1.2x1=1.08 sqm
LABOUR
114 Beldar 645 Day
9999 Fixing of rawl plugs 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 18.54 kg.
Cost for 1 kg.
Say
9.36 9.49 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and
Code 1.6mm thick for windows etc. including 62 Rate
Description x19 mm beadingUnit
of II nd class teak
Details of cost for a window of size
140x110cm =1.54sqm.
MATERIAL
Expended metal -20x60mm mesh 3.2mm wide = 1.4x1.1m = 1.54sqm.
Total = 1.69 sqm.
1015 Mild steel expanded metal 20x60 mm strands 280 sqm
Priming coat
Area=1.40x1.10x1.00=1.54sqm
13.50.3 Rate as per Item No.13.50.3 of SH:FINISHIN 55.5 sqm
Second class teak wood beading
5mx62mmx19mm = 0.0059cum.
Add wastage @ 10% = 0.00059cum.
Total = 0.00649cum. Say 6 cudm.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.37 9.5 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not
Code less than 7.75 Kg per sqm to window frames
Description etc. including 62x19
Rate Unit mm beading of
140x110cm =1.54sqm.
MATERIAL
Hard drawn steel wire fabric -20x60mm mesh 3.2mm wide = 1.4x1.1m
Total = 1.69 sqm.
1021 Hard drawn steel wire fabric 430 sqm
9977 Carriage of wire fabric 2.12 L.S.
Priming coat
Area=1.40x1.10x1.00=1.54sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.38.1 9.51 Providing and fixing fly proof galvanized M.S. wire gauge to windows and
clerestory
9.51.1 With windows
2nd class using beading
teak wood wire gauge withmm
62X19 average width of aperture 1.4 mm in
140x110cm =1.54sqm.
MATERIAL
Wire gauze -20x60mm mesh 3.2mm wide = 1.4x1.1m = 1.54sqm.+
Total = 1.69 sqm.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.38.2 9.51 Providing and fixing fly proof galvanized M.S. wire gauge to windows and
clerestory
9.51.2 With 12 mm windows using
mild steel wire gauge with average width of aperture 1.4 mm in
U beading
140x110cm =1.54sqm.
MATERIAL
Total = 1.69 sqm.
7349 12 mm M.S. 'U' beading 14 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.39 9.52 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than
Code 7.75 Kg per sqm in panelled and glazed door
Description and window shutter
Rate Unit instead of glass
MATERIAL
Difference of cost
TOTAL
TOTAL
TOTAL
Extra cost for 1 sqm.
Say
9.4 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
Code mm diameter bolts, nuts and wooden plugsRate
Description and embeddingUnit in cement concrete
Details of cost for 1 hold fast
MATERIAL
M.S.flat 40x5mm 40cm long @ 1.68 kg/m = 0.672 kg = 0.0067 qunital
9977 Carriage of steel 2.12 L.S.
30x10x15cm= 0.0045cum.+
Total = 0.00495cum. Say 0.005cum.
4.2.5 Rate as per item no 4.2.5 of SH : Concrete wo 8843.45 cum
9999 Bolts and nuts 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
9.41.1 9.54 Providing beams including hoisting, fixing in position and applying wood
9.54.1 Salpreservative
wood for the unexposed surfaces, etc. complete with :
Details of cost for a beam
450x30x15cm = 0.203cum. or 203cudm.
MATERIAL
Sal wood = 203 cudm.+
Add wastage @ 2% = 4.06cudm.
Total = 207.06cudm. Say 207.1 cudm.
Priming coat (wood preservative)
13.57.1 Rate as per item no 13.57.1 SH : Finishing 47.1 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 203 cudm.
Cost of 1 cum.
Say
9.41.2 9.54 Providing beams including hoisting, fixing in position and applying wood
preservative
9.54.2 Hollock woodfor the unexposed surfaces, etc. complete with :
Details of cost for a beam
450x30x15cm = 0.203cum. or 203cudm.
MATERIAL
Hollock wood = 203 cudm.+
Add wastage @ 2% = 4.06cudm.
Total = 207.06cudm. Say 207.1 cudm.
Priming coat (wood preservative)
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 203 cudm.
Cost of 1 cum.
Say
9.42.1 9.55 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with
necessary screws
9.55.1 125x65x2.12 mm etc. complete :
Details of cost for ten hinges
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws etc. complete :
9.55.4 50x37x1.50 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.43.1 9.56 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with
necessary screws
MATERIAL
8222 M.S. heavy weight but hinges 125x90x4.0mm 230 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.56.2 100x75x3.50 mm
MATERIAL
8223 M.S. heavy weight butt hinges 100x75x3.5 m 180 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws
MATERIAL
8224 M.S. heavy weight butt hinges 75x60x3.1 mm 110 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws
MATERIAL
8225 M.S. heavy weight butt hinges 50x40x2.5 mm 90 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.44.1 9.57 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with
necessary screws
9.57.1 125x65x2.12 mm etc. complete.
MATERIAL
642 Oxidised mild steel butt hinges 125x65x2.12 125 10 Nos
682 Oxidised mild steel screws 50 mm 76 100 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws
MATERIAL
643 Oxidised mild steel butt hinges 100x58x1.90 90 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws
MATERIAL
644 Oxidised mild steel butt hinges75x47x1.70 m 65 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws
MATERIAL
645 Oxidised mild steel butt hinges50x37x1.50 m 55 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.45.1 9.58 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with
necessary screwsmm
9.58.1 150x125x27x2.80 etc. complete :
MATERIAL
646 Oxidised mild steel parliamentary hinges15 335 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screwsmm
9.58.2 125x125x27x2.80 etc. complete :
MATERIAL
647 Oxidised mild steel parliamentary hinges 12 300 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screwsmm
9.58.3 100x125x27x2.80 etc. complete :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary screws
9.58.4 75x100x20x2.24 mm etc. complete :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.46.1 9.59 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with
9.59.1 150necessary
mm screws etc. complete :
MATERIAL
650 Oxidised mild steel single acting spring hing 140 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.59.2 125necessary
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.59.3 100necessary
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.47.1 9.6 Providing and fixing oxidised M.S. double acting spring hinges with necessary
9.60.1 150screws
mmetc. complete.
MATERIAL
653 Oxidised mild steel double acting spring hin 160 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.60.2 125screws
mmetc. complete.
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.60.3 100screws
mmetc. complete.
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.48.1 9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and
fixing with
9.61.1 Overall necessary
width 35 mm screws etc., complete.
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 metre
Say
fixing with
MATERIAL
7485 Oxidised M. S. hinges finished with nickel pla 40 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 metre
Say
fixing with
MATERIAL
7486 Oxidised M. S. hinges finished with nickel pla 52 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 metre
Say
9.49.1 9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and
screws mm
9.62.1 300x16 etc. complete :
MATERIAL
660 Oxidised mild steel sliding door bolt 300x16 90 each
641 Bright finished or black enamelled mild steel 5 each
9988 Carriage of materials & sundries 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.49.2 9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and
screws mm
9.62.2 250x16 etc. complete :
MATERIAL
661 Oxidised mild steel sliding door bolt 250x16 80 each
641 Bright finished or black enamelled mild steel 5 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.50.1 9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel
type) with
9.63.1 250x10 mmnecessary screws etc. complete :
MATERIAL
664 Oxidised mild steel tower bolt (barrel type) 43 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
type) with
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
type) with
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
type) with
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.51 9.64 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock
Code conforming to IS : 7534 with necessary screws
Description Rate bolts, nut and washers etc.
Unit
MATERIAL
2449 Oxidised mild steel pull bolt lock (locking bo 62 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.52.1 9.65 Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930
with screws
9.65.1 300x20x6 mmetc. complete :
MATERIAL
662 Oxidised mild steel door latch 300x20x6 mm 49 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.52.2 9.65 Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930
with screws
9.65.2 250x20x6 mmetc. complete :
MATERIAL
663 Oxidised mild steel door latch 250x20x6 mm 39 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.53.1 9.66 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with
9.66.1 125necessary
MATERIAL
668 Oxidised mild steel handles 125 mm 20 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.66.2 100 mm
MATERIAL
669 Oxidised mild steel handles 100 mm 15 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.66.3 75 necessary
MATERIAL
670 Oxidised mild steel handles75 mm 12 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.54.1 9.67 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS
: 363mm
9.67.1 150 with necessary screws etc. complete :
MATERIAL
679 Oxidised mild steel hasps and staples(safety 128 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.67.2 115: 363mm
with necessary screws etc. complete :
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.67.3 90: 363
mm with necessary screws etc. complete :
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.55.1 9.68 Providing and fixing oxidised M.S. casement stays (straight peg type) with
9.68.1 300necessary screwsnot
mm weighing etc.less
complete.
than 200 gms
MATERIAL
7063 Oxidised M.S.casement stay (straight peg typ 35 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
necessary
9.68.2 250 screwsnot
complete.
than 150 gms
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.68.3 200necessary screwsnot
complete.
than 120 gms
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.56 9.69 Providing and fixing oxidised M.S. Safety chain with necessary fixtures for
Code doors, (weighting not less than 450 gms) Rate
Description Unit
MATERIAL
7184 Oxidised M.S. safety chain (weighing not less 57 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.57.1 9.7 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless
steel screws mm
9.70.1 125x64x1.90 etc. complete :
Details of cost for 10 Nos
MATERIAL
8215 Stainless steel butt hinges 125x64x1.9 mm I 310 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
steel screws etc.
9.70.2 100X58X1.90 mm complete :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
steel screwsmm
9.70.3 75x47x1.80 etc. complete :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
steel screwsmm
9.70.4 50x37x1.50 etc. complete :
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.58.1 9.71 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight)
with stainlessmm
9.71.1 125x64x2.50 steel screws etc. complete :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
with stainlessmm
9.71.2 100x60x2.50 steel screws etc. complete :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
with stainless
9.71.3 75x50x2.50 mm steel screws etc. complete :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.59.1 9.72 Providing and fixing bright finished brass butt hinges with necessary screws etc
complete : mm (heavy type)
9.72.1 125x85x5.5
MATERIAL
382 Brass butt hinges (heavy type) : 125x85x5.5 1309 10 Nos
449 Brass screws 50 mm 220 100 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
complete :mm (ordinary type)
9.72.2 125x70x4
MATERIAL
378 Brass butt hinges (light/ordinary type) : 125 775 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
complete : mm (heavy type)
9.72.3 100x85x5.5
MATERIAL
383 Brass butt hinges (heavy type) : 100x85x5.5 997 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
9.72.4 100x70x4
MATERIAL
379 Brass butt hinges (light/ordinary type) : 100 625 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
completemm
9.72.5 75x65x4 : (heavy type)
MATERIAL
384 Brass butt hinges (heavy type) :75x65x4.0 mm 838 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
9.72.6 75x40x2.5
MATERIAL
380 Brass butt hinges (light/ordinary type) : 75x4 380 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
complete :
9.72.7 50x40x2.5 mm (ordinary type)
MATERIAL
381 Brass butt hinges (light/ordinary type) : 50x4 155 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
9.60.1 9.73 Providing and fixing bright finished brass parliamentary hinges with necessary
screws etc. complete
9.73.1 150x125x27x5 mm :
MATERIAL
385 Brass parliamentary hinges 150x125x27x5 m 2610 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
screws etc. complete :
9.73.2 125x125x27x5 mm
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.73.3 100x125x27x5 mm :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.73.4 75x100x20x3.2 mm :
MATERIAL
388 Brass parliamentary hinges75x100x20x3.2 m 1870 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.61.1 9.74 Providing and fixing bright finished brass tower bolts (barrel type) with
necessary
9.74.1 250x10 mmscrews etc. complete :
MATERIAL
400 Brass tower bolt (barrel type) 250x10 mm 257 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
necessary
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.74.4 100x10 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no
Say
9.62.1 9.75 Providing and fixing bright finished brass door latch with necessary screws etc.
complete :mm
9.75.1 300x16x5
MATERIAL
411 Brass door latch 300x16x5 mm (0.380 kg) 185 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.62.2 9.75 Providing and fixing bright finished brass door latch with necessary screws etc.
complete :mm
9.75.2 250x16x5
MATERIAL
412 Brass door latch 250x16x5 mm (0.350 kg) 175 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.63 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6
Code levers and a pair of lever handles of approved
Description Ratequality with necessary
Unit screws etc.
Details of cost for one No
MATERIAL
413 Brass mortice latch and lock 100x65 mm with6 400 each
LABOUR
9999 Sundries (screws, carriage etc.) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.64 9.77 Providing and fixing bright finished brass 100 mm mortice latch with one dead
Code bolt and a pair of lever handles of approvedRate
Description quality with necessary
Unit screws etc.
MATERIAL
414 Brass mortice latch 100x65mm with a pair of b 310 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.65 9.78 Providing and fixing bright finished brass night latch of approved quality
Code including necessary screws etc. complete.Rate
Description Unit
MATERIAL
438 Brass Night latch 610 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.66.1 9.79 Providing and fixing special quality bright finished brass cupboard or ward robe
9.79.1 40 locks
mmwith four levers of approved quality including necessary screws etc.
MATERIAL
2451 Brass cupboard lock 6 levers (best make of a 57 each
LABOUR
9999 Sundries & screws 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.79.2 50 locks
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.79.3 65 locks
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.79.4 75 locks
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.67 9.8 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of
Code approved quality with necessary screws. Rate
Description Unit
MATERIAL
447 Brass cupboard knob or ward robe knob 50 36 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.68.1 9.81 Providing and fixing bright finished brass handles with screws etc. complete:
9.81.1 125 mm
MATERIAL
408 Brass handles 125 mm with plate 175x32 mm 144 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.81.2 100 mm
MATERIAL
409 Brass handles 100 mm with plate 150x32 mm 133 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.81.3 75 mm
MATERIAL
410 Brass handles75 mm with plate 125x32 mm 103 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.69 9.82 Providing and fixing bright finished brass hanging type floor door stopper with
Code necessary screws, etc. complete.
Details of cost for 10 hanging floor door stopper
MATERIAL
2455 Brass hanging type door stopper 150 mm 77 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.7 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic
Code door closer (having brand logo with ISI, IS :Rate
Description 3564, embossedUnit
on the body, door
MATERIAL
2456 Hydraulic door closer bottle type M.S. body 686 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.71 9.84 Providing and fixing aluminium extruded section body tubular type universal
Code hydraulic door closer (having brand logo with
Description RateISi, IS : 3564, Unit
embossed on the
MATERIAL
7060 Hydraulic door closer tubular type Aluminium 560 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.72 9.85 Providing and fixing bright finished brass casement window fastener with
Code necessary screws etc. complete.
MATERIAL
423 Brass casement window fastener 45 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.73.1 9.86 Providing and fixing bright finished brass casement stays (straight peg type)
9.86.1 300withmm
necessary
weighing screws etc.than
not less complete :
330 gms
MATERIAL
424 Brass casement stays (straight peg type ) 30 126 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.86.2 250withmm
necessary
not less complete :
280 gms
MATERIAL
425 Brass casement stays (straight peg type ) 25 100 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.86.3 200withmm
necessary
not less complete :
240 gms
MATERIAL
426 Brass casement stays (straight peg type ) 20 95 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.74.1 9.87 Providing and fixing bright finished brass hasp and staple (safety type) with
9.87.1 150necessary
MATERIAL
431 Brass hasps and staples (safety type) 150 m 740 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.87.2 115necessary
MATERIAL
432 Brass hasps and staples (safety type) 115 m 670 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.87.3 90 necessary
MATERIAL
433 Brass hasps and staples (safety type)90 mm 575 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.75 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with
Code 6 levers and a pair of lever handles of approved
Description Rate quality withUnit
necessary screws
MATERIAL
558 Chromium plated Brass mortice latch and lock 470 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.76 9.89 Providing and fixing chromium plated brass night latch of approved quality
Code including necessary screws etc. complete.Rate
Description Unit
MATERIAL
583 Chromium plated Brass Night latch 500 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.77.1 9.9 Providing and fixing special quality chromium plated brass cupboard locks with
six levers
9.90.1 Size 40 mm of approved quality including necessary screws etc. complete.
MATERIAL
2468 Nickled Chromium Brass cupboard lock 40 mm 63 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
six levers
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
six levers
9.90.3 Size 65 mmof approved quality including necessary screws etc. complete.
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
six levers
Details of cost for one
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
9.78 9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs
Code with nuts complete.
MATERIAL
584 Chromium plated Brass Wardrobe Knobe 50 80 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.79.1 9.92 Providing and fixing chromium plated brass handles with necessary screws etc.
9.92.1 125complete:
mm
MATERIAL
555 Chromium plated Brass handles 125 mm with 160 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.92.2 100complete:
mm
MATERIAL
556 Chromium plated Brass handles 100 mm with 140 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.92.3 75 complete:
mm
MATERIAL
557 Chromium plated Brass handles 75mm with p 125 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.8 9.93 Providing and fixing chromium plated brass casement window fastener with
Code necessary screws etc. complete.
MATERIAL
568 Chromium plated brass casement window fast 90 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.81.1 9.94 Providing and fixing chromium plated brass casement stays (straight peg type)
9.94.1 300withmm
necessary
not less complete :
330 gms
MATERIAL
569 Chromium plated Brass casement stays (straig 140 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.94.2 250withmm
necessary
not less complete :
280 gms
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.94.3 200withmm
necessary
not less complete :
240 gms
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.82.1 9.95 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating
not less than
9.95.1 125x75x4 mmgrade AC 10 as per IS: 1868) transparent or dyed to required colour
MATERIAL
687 Anodised Aluminium butt hinges 125x75x4 m 560 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
not less than
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
not less than
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
not less than
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
not less than
9.95.5 100x63x3.2 mm grade AC 10 as per IS: 1868) transparent or dyed to required colour
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
not less than
9.95.6 75x63x4 mm grade AC 10 as per IS: 1868) transparent or dyed to required colour
MATERIAL
692 Anodised Aluminium butt hinges 75x63x4 mm 275 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
not less than
9.95.7 75x63x3.2 mmgrade AC 10 as per IS: 1868) transparent or dyed to required colour
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
not less than
9.95.8 75x45x3.2 mmgrade AC 10 as per IS: 1868) transparent or dyed to required colour
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
9.83.1 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic
coating mm
9.96.1 300x16 not less than grade AC 10 as per IS : 1868), transparent or dyed to
MATERIAL
696 Anodised Aluminium sliding door bolt 300x1 147 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.83.2 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic
coating mm
9.96.2 250x16 not less than grade AC 10 as per IS : 1868), transparent or dyed to
MATERIAL
697 Anodised Aluminium sliding door bolt 250x1 128 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.84.1 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating
not lessmm
9.97.1 300x10 than grade AC 10 as per IS : 1868 ) transparent or dyed to required
MATERIAL
698 Anodised Aluminium tower bolt (barrel type) 580 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
not lessmm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
not lessmm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
not lessmm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
not lessmm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.85 9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic
Code coating not less than grade AC 10 as per ISRate
Description : 1868) transparent
Unit or dyed to
Details of cost for 10 pull bolt lock
MATERIAL
2464 Anodised Aluminium pull bolt lock (locking b 48 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.86 9.99 Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm,
Code anodised (anodic coating not less than grade
Description AC 10 as per IS
Rate : 1868) transparent
Unit
MATERIAL
706 Anodised Aluminium kicking plate 50 cm lon 142 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.87.1 9.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating
not less
9.100.1 125 mm than grade AC 10 as per IS : 1868) transparent or dyed to required colou
MATERIAL
703 Anodised Aluminium handles 125 mm with pl 324 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
not less
9.100.2 100 mm than grade AC 10 as per IS : 1868) transparent or dyed to required colou
MATERIAL
704 Anodised Aluminium handles 100 mm with pl 275 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.100.3 75notmm
less than grade AC 10 as per IS : 1868) transparent or dyed to required colou
MATERIAL
705 Anodised Aluminium handles 75mm with plat 231 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.88.1 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodicrubber
9.101.1 Single coating not less than grade AC 10 as per IS : 1868) transparent or dyed
stopper
MATERIAL
2459 Anodised Aluminium hanging type door stopp 20 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.88.2 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodic
9.101.2 Twin coating
rubber not less than grade AC 10 as per IS : 1868) transparent or dyed
stopper
MATERIAL
7059 Aluminium hanging floor door stopper with twi 40 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.89 9.102 Providing and fixing aluminium casement stays, ISI marked, anodised (anodic
Code coating not less than grade AC 10 as per ISRate
Description : 1868) transparent
Unit or dyed to
MATERIAL
2465 Anodised Aluminium Casement stay 250 mm 33 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.9 9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI
Code marked, with six levers and a pair of anodised
Description Rate(anodic coating
Unitnot less than
Details of cost for 1 lock
MATERIAL
7001 Brass 100mm mortice latch and lock with6 leve 195 each
7003 Pair of Anodised Aluminium lever handles for 215 each
LABOUR
9988 Sundries including carriage of materials 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 lock
Say
9.91 9.104 Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end
Code in pelmets as curtain rod.
MATERIAL
7056 Aluminium tee channel (heavy duty) with rolle 100 metre
9999 LABOUR 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 metre
Cost of 1 metre
Say
9.92.1 9.105 Providing and fixing partition upto ceiling height consisting of G.I. frame and
required
9.105.1 75 board,thickness
mm overall includingpartition
providing and
with fixing
12.5 mmofthick
frame work skin
double madefire
of rated
special
Glass
Code Reinforced
Description Gypsum (GRG) plaster board conforming
Rate to IS: 2095:
Unit (part 3):2011
Details of cost for 6.00x3.65 = 21.9 sqm (Partition Panel)
MATERIAL
7366 Glass reinforced Gyp sum ( GRG) board 8.5 240 sqm
2x6.00x3.65=43.80sqm
7367 Galvanised M.S. sheet 0.5 mm thick pressed 60 metre
50mm floor and ceiling channel 2x6.00

=12m
7369 Galvanised M.S. sheet 0.50 mm thick presse 70 metre
48mm stud-72x34x36x0.5mm
(6.00/0.61)+1 = 11x3.65 = 40.15m
7020 All drive screws ( for gypsum board) 58 100 Nos
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392
7388 Dash hold fastener 12.5 mm dia, 40 mm long w 10 each
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
869 Plaster of Paris 5 kilogra
(88/100)x21.9 = 19.27
763 Glue 75 kilogra
(22/100)x21.90=4.82
7018 Joint tape roll 90 roll
(120m roll) (300/100)x21.90/120 = 0.584 Nos
7021 Primer ( for gypsum board) 70 litre
(36/100)x21.90 = 7.88 litre
1022 Galvanised steel bolts & nuts 6 mm dia and 2 38 10 Nos
11x2x2=44
1211 G.I. plain washer for seam bolts 32 100 Nos
9977 Sundries carriage 2.12 L.S.
9999 Sundries scaffolding 2.12 L.S.
Labour for 21.90 sqm.
0.3x21.90=6.57
0.13x21.90=2.847
131 Painter 714 Day
0.05x21.90=1.095
114 Beldar 645 Day
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
required
9.105.2 75mm board,
overall includingpartition
thickness providing and
with fixing
12.5 mmof frame
thick workskin
double made of special
tapered edged
Code plain Gypsum plaster board conforming to Rate
Description IS: 2095: (part I):Unit
2011 (Board with BIS
MATERIAL
7009 12.5 mm thick tapered edge plain Gypsum bora 140 sqm
2x6.00x3.65=43.80sqm

=12m
(6.00/0.61)+1 = 11x3.65 = 40.15m
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
(88/100)x21.9 = 19.27
763 Glue 75 kilogra
(22/100)x21.90=4.82
(120m roll) (300/100)x21.90/120 = 0.584 Nos
(36/100)x21.90 = 7.88 litre
11x2x2=44
0.3x21.90=6.57
0.13x21.90=2.847
131 Painter 714 Day
0.05x21.90=1.095
114 Beldar 645 Day
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
required
9.105.3 66mm board,
overall includingPartition
thickness providing and
with fixing
8mm of frame
thick doublework
skinmade of special
Calcium Silicate
Code Board made
Description with Calcareous & Siliceous materials
Rate reinforced with
Unit cellulose fiber
MATERIAL
8699 8 mm thick tapered edge calcium silicate boar 270 sqm
2x6.00x3.65=43.80sqm

=12m
(6.00/0.61)+1 = 11x3.65 = 40.15m
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
(88/100)x21.9 = 19.27
763 Glue 75 kilogra
(22/100)x21.90=4.82
(120m roll) (300/100)x21.90/120 = 0.584 Nos
(36/100)x21.90 = 7.88 litre
11x2x2=44
0.3x21.90=6.57
0.13x21.90=2.847
131 Painter 714 Day
0.05x21.90=1.095
114 Beldar 645 Day
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
required
9.105.4 66mm board,
overall includingpartition
thickness providing and8mm
using fixingthick
of frame work
double made
skin of special
multipurpose
Code cement board reinforced with cellulose fibre
Description manufactured Unit
Rate through autoclaving
MATERIAL
237 Non - Asbestos multi purpose fibre (high impa 220 sqm
2x6.00x3.65=43.80sqm
=12m
(6.00/0.61)+1 = 11x3.65 = 40.15m
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
(88/100)x21.9 = 19.27
763 Glue 75 kilogra
(22/100)x21.90=4.82
(120m roll) (300/100)x21.90/120 = 0.584 Nos
(36/100)x21.90 = 7.88 litre
11x2x2=44
0.3x21.90=6.57
0.13x21.90=2.847
131 Painter 714 Day
0.05x21.90=1.095
114 Beldar 645 Day
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
required
9.105.5 66 board,thickness
mm overall includingpartition
providing and 8fixing
using of frame
mm thick work
double made
skin of special
multipurpose
Code cement bonded wood particle board manufactured
Description Rate as per IS: 14276 with suitable
Unit
MATERIAL
243 8 mm thick double skin non-asbestos multipu 215 sqm
2x6.00x3.65=43.80sqm

=12m
(6.00/0.61)+1 = 11x3.65 = 40.15m
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84
Total = 392
[(6.00/0.61)+1]x2=22
[(3.65/0.45)+1]x2= 18
(88/100)x21.9 = 19.27
763 Glue 75 kilogra
(22/100)x21.90=4.82
(120m roll) (300/100)x21.90/120 = 0.584 Nos
(36/100)x21.90 = 7.88 litre
11x2x2=44
0.3x21.90=6.57
112 Carpenter 2nd class 714 day
0.13x21.90=2.847
131 Painter 714 Day
0.05x21.90=1.095
114 Beldar 645 Day
0.35x21.90=7.665
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 21.90 sqm
Cost for 1 sqm.
Say
9.93.1 9.106 Providing and fixing PTMT handles with necessary screws etc. complete.
9.106.1 125x34x24 mm weighing not less than 23 gms
Details of cost for ten Nos.
MATERIAL
7512 PTMT handle 125x34x24mm 20 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.93.2 9.106 Providing and fixing PTMT handles with necessary screws etc. complete.
9.106.2 150x34x24 mm weighing not less than 26 gms
MATERIAL
7513 PTMT handle 150x34x24mm 20 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.94.1 9.107 Providing and fixing PTMT Butt hinges with necessary screws etc. complete.
9.107.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than
Code 34 gms
MATERIAL
7514 PTMT butt hinges 75x60x10mm 29 Each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.94.2 9.107 Providing and fixing PTMT Butt hinges with necessary screws etc. complete.
9.107.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than
Code 53 gms
MATERIAL
7515 PTMT butt hinges 100x75x10mm 36 Each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.95.1 9.108 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and
necessary screws
9.108.1 152x42x18 etc., complete.
mm weighing not less than 60 gms
MATERIAL
7516 PTMT Tower bolt 152x42x18mm 35 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.95.2 9.108 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and
necessary screws
9.108.2 202x42x18 etc., complete.
mm weighing not less than 78 gms
MATERIAL
7517 PTMT Tower bolt 202x42x18mm 58 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.96 9.109 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with
Code suitable washers weighing not less than 33Rate
Description gms Unit
MATERIAL
7518 PTMT door catcher 72x42mm 22 Each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.97 9.11 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality
Code 25mm dia (Average) half cut bamboo placed
Description vertically and fixed
Rate Unit together with
Details of cost for a bamboo jaffery of size 1.00m x 2.10m = 2.10 sqm
MATERIAL
Bamboo 25mm of 100/ 2.50 = 40 nos
Half cut off = 40/2 .=20 nos. x 2.10 = 42.00m
Add wastage @ 15% = 6.30 m
Total = 48.30m
Rate of Bamboo 25 mm dia 2.5 metre long

for one score i.e. 20nos is Rs. 192
for 48.30m qty 48.30 /( 2.5 * 20) = 0.966
305 Bamboo 25 mm dia 2.5 metre long 400 score
9977 Carriage of Bamboo 2.12 L.S.
3 nos. (1.00 x 0.05 x 0.05) = 0.00375 cm
Add wastage @ 5% = 0.00019 cm
Total = 0.00394 cm or 3.94 cudm
9999 Nails and wire 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.10 sqm
Cost for 1 sqm
Say
9.98.1 9.111 Providing and fixing wooden moulded corner beading of triangular shape to the
junction
9.111.1 50x50 mm of(base
panelling
and etc. with iron screws, plugs and priming coat on unexposed
height)
Details of cost for beading = 5.00 m
MATERIAL
Teak wood 2nd class in plan ks 500 x 5 x 5 mm / 2 = 0.000625 cum
Add wastage @ 10% = 0.00063
total = 0.00688 cum say 6.88 cudm
Priming coat
Area 5.0 x (.05 +.05) = 0.50 sqm
LABOUR
For plaining, fixing & making design
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost for 1 metre
Say
9.99 9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj
Code beading of size 18X5 mm fixed with wooden
Description adhesive of approved
Rate Unit quality and
MATERIAL
8719 2nd class teak wood lipping/ moulded beadib 30 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
9.1 9.113 Providing and fixing bright finished 100 mm mortice lock with 6 levers without
Code pair of handles of approved quality for aluminium
Description Rate door, withUnit
necessary screws
Details of cost for 1 no.
8716 100 mm mortice lock with 6 levers for alumini 432 each
LABOUR
9999 Sundries( screws, carriage etc) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
9.101.1 9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward
robe shutters,
9.114.1 Triple including
strip vertical type fixing with necessary screws etc. complete.
Details of cost for 1 No.
MATERIAL
8714 Magnetic catcher triple strip vertical type 28 each
9999 Sundries including screws and fixing charges. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
9.101.2 9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward
robe shutters,
9.114.2 Double including type)
strip (horizontal fixing with necessary screws etc. complete.
MATERIAL
8715 Magnetic catcher double strip horizontal type 20 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
9.102 9.115 Providing and fixing powder coated telescopic drawer channels 300 mm long
Code with necessary screws etc. complete as per
Description directions of Engineer-
Rate Unit in-charge.
Details of cost for 10 sets.
MATERIAL
8703 Telescopic drawer channels 300 mm long 240 set
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sets
Cost for 1 set
Say
9.103 9.116 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by
Code with stainless steel rollers to run inside C or
Description E aluminium channel
Rate Unit section (The
MATERIAL
8704 Stainless steel roller for sliding arrangement 11 each
9999 Labour for fixing 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
9.104.1 9.117 Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having
9.117.1 Extruded sectionan overall
profile dimension
size as below (tolerance ±1mm), with wall
48x40 mm
Detail of cost for 5 metre
MATERIAL
8010 48mmX40mmX1.5mm thick Factory made door fr 130 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost for 1 metre
Say
9.104.2 9.117 Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having
9.117.2 Extruded sectionan overall
profile dimension
size as below (tolerance ±1mm), with wall
42x50 mm
MATERIAL
8705 50 mmX42 mmX2 mm thick Factory made door fr 166 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metre
Cost for 1 metre
Say
9.105.1 9.118 Providing and fixing to existing door frames.

9.118.1 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC
Code hollow section of size 59x24 mm and wall thickness
Description Rate 2 mm (±Unit
0.2 mm) with inbuilt
Detail of cost for one door shutter 2.20x1.08m = 2.38 sqm
MATERIAL
8001 24 mm thick Factory made shutters with frame, 1085.93 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say

9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles
Code and rails of a uPVC hollow section of size 60x30
Description Rate mm and wall thickness 2 mm (±
Unit
MATERIAL
8002 30 mm thick Factory made shutters with frame, 1248.82 sqm
LABOUR
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say

9.118.3 25 mm thick PVC flush door shutters made out of a one piece Multi chamber
Code extruded PVC section of the size of 762 mmRate
Description X 25 mm or less as per requirement
Unit
MATERIAL
8706 25 mm thick factory made PVC flush door shutt 1700 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.106 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall
Code thickness of 5 mm, made out of extruded 5mm
Description Raterigid PVC foam
Unitsheet, mitred at
Details of cost for one door frame of 5 metre
MATERIAL
8011 Factory made door frame PVC extruded sheet 260 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metres
Cost of 1 No
Say
9.107.1 9.12 Providing and fixing factory made panel PVC door shutter consisting of frame
9.120.1 30made
mmout of M.S.
thick plaintubes of 19shutters
PVC door gauge thickness and size of 19 mm x 19 mm for
Details of cost for one door shutter 2.20x1.08m = 2.38 sqm
MATERIAL
8003 Factory made PVC rigid foam panelled shutter 1547.45 sqm
8100 Powder coated M.S. butt hinges 100mm X5 130 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.107.2 9.12 Providing and fixing factory made panel PVC door shutter consisting of frame
9.120.2 30made
mmout of M.S.
thick tubes of 19
pre laminated gauge
PVC doorthickness
shutters and size of 19 mm x 19 mm for
MATERIAL
8004 Factory made PVC rigid foam panelled shutter 1547.45 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.108 9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-
Code section 90 mm x 45 mm having single rebate
Description of 32 mm x 15 Unit
Rate mm to receive
MATERIAL
8707 Factory made glass reinforced plastic door fr 480 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metres
Cost of 1 No
Say

9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of
Code required colour and approved brand and manufacture,
Description Rate made with fire - retardant
Unit
MATERIAL
8708 30 mm thick factory made glass fiber reinforced 2326 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say

9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different
Code plain and wood finish made with fire retardant
Description Rategrade unsaturated
Unit polyester resin
MATERIAL
8730 30 mm thick factory made glass fiber reinforced 2675 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.11 9.123 Providing and fixing factory made door frame (single rebate) made out of single
Code piece extruded solid PVC foam profile withRate
Description homogenous fine cellular structure
Unit
MATERIAL
8710 Factory made solid PVC door frame 60 x 30 m 315 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metres
Cost of 1 meter
Say
9.111.1 9.124 Providing and fixing factory made 30 mm thick door shutter made of solid PVC
foamdecorative
9.124.1 Non profile. The styles & rails shall be of size 75 mm x 30 mm having wall
finish
MATERIAL
8712 30 mm thick factory made solid PVC profile pan 2000 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.111.2 9.124 Providing and fixing factory made 30 mm thick door shutter made of solid PVC
foam profile.
9.124.2 Decorative The styles
finish & rails
(both side woodshall be of size
grained 75 mm x 30 mm having wall
finish)
MATERIAL
8709 30 mm thick factory made solid PVC profile pan 2100 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.112 9.125 Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters
Code (bathroom and W.C. doors) using syntheticRate
Description rubber based adhesive.
Unit
Details of cost for 1.0x0.3m = 0.3 sqm
MATERIAL
PVC rigid foam shet 1mm thick = 0.30 sqm 0
Add wastage @ 10% = 0.03 sqm
8006 Factory made PVC rigid foam sheet 1mm thic 155.8 sqm
PVC rigid foam sheet1mm thick = 0.30 sqm

Total = 0.33 sqm
9999 Rubber adhesive 2.12 L.S.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.30 sqm
Cost of 1 sqm
Say
9.113.1 9.126 Providing and fixing 12 mm thick panelling or panelling and glazing in panelled
or panelled
9.126.1 Marine and glazed
plywood shutters
conforming for710
to IS: doors, windows and clerestory windows
MATERIAL
Plywood 4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
8724 12 mm thick marine plywood conforming to IS 720 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.113.2 9.126 Providing and fixing 12 mm thick panelling or panelling and glazing in panelled
or panelled
9.126.2 Fire and
retardant glazed shutters
plywood conformingfor to
doors, windows and clerestory windows
IS: 5509
MATERIAL
Plywood 4x47.2x38.65cm = 0.73sqm+
Total = 0.80 sqm.
8725 12 mm thick fire retardant plywood conforming 867 sqm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.114.1 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood
grain
9.127.1 1.5 mm in thick
gloss / matt/ suede finish with high density protective surface layer and
MATERIAL
Decorative laminate = 5.00 sqm
Total = 5.50 sqm
8726 1.5 mm thick decorative laminated sheet 380 sqm
9999 Adhesive 2.12 L.S.
LABOUR
114 Beldar 645 Day
9999 Sundries i/c nails etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5.00 sqm
Cost for 1 sqm
Say
9.114.2 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood
grain
9.127.2 1.0 mmin thick
gloss / matt/ suede finish with high density protective surface layer and
MATERIAL
Decorative laminate = 5.00 sqm
Total = 5.50 sqm
8727 1.0 mm thick decorative laminated sheet 294 sqm
9999 Adhesive 2.12 L.S.
LABOUR
114 Beldar 645 Day
9999 Sundries i/c nails etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5.00 sqm
Cost for 1 sqm
Say
9.115 9.128 Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4
mm thick of required colour, size and design made by Resin Transfer Moulding
Detail of cost for a chajja 0.90 x 0.60 = 0.54 sqm
MATERIAL
8713 Fiber glass reinforced plastic chajja 3000 sqm
including accessories
9999 fixing charges including sundries. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.54 sqm
Cost for 1 sqm
Say
9.116 9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat
Code pressed three layer particle board or graded
Description wood particle board
Rate Unit IS: 12823
Details of cost for one shutter 2.20x1.00m = 2.20sqm.
MATERIAL
7272 25 mm thick melamine faced prelaminated thre 900 sqm
8678 1 mm thick 35 mm wide bright finished stainle 47.04 metre
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
7271 IInd class teak wood lipping 25 mm wide x 12 28 metre
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.20sqm.
Cost of 1 sqm
Say
9.117.1 9.13 Providing and fixing cup board shutters with 25 mm thick veneered particle
board IS : 3097 marked, exterior grade (Grade I), of approved make, including
9.130.1 With decorative veneering on one side and commercial veneering on other side
MATERIAL
7269 25 mm thick particle board 435 sqm
346 Extra for veneered particle board with : Teak 230 sqm
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.20sqm.
Cost of 1 sqm
Say
9.117.2 9.13 Providing and fixing cup board shutters with 25 mm thick veneered particle
boardnon
9.130.2 With IS :decorative
3097 marked, exterioron
veneering grade
both(Grade
sides I), of approved make, including
MATERIAL
7269 25 mm thick particle board 435 sqm
347 Extra for veneered particle board with : Comm 155 sqm
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.20sqm.
Cost of 1 sqm
Say
9.118.1 9.131 Providing and fixing factory made shutters of Pre-laminated particle board flat
pressed
9.131.1 25 three layer or graded wood particle board with one side decorative finish
mm thick
Details of cost for 2.10sqm.
(Door size 2.1x1.00 = 2.10sqm.)
MATERIAL
Prelaminated particle board = 2.10sqm. +
Total = 2.21sqm.
7445 25 mm prelaminated flush door both side deco 800 sqm
7443 Aluminium single cleat of size 30x32x3 14 each
7444 Aluminium grip strip of size 50x12x2 11 each
834 Synthetic enamel paint in all shades except b 165 litre
9988 Carriage of materials including loading and u 2.12 L.S.
9999 Sundries and screws etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.10sqm.
Cost of 1 sqm
Say
9.119 9.132 Providing and fixing aluminum U beading of required size to Pre-laminated/flush
Code door shutter, including fixing etc. completeRate
Description as per directionUnit
of Engineer-in-
Details of cost for 1kg.
MATERIAL
Aluminum U beading = 1.00kg +
Add 10% wastage = 0.10
Total = 1.10kg.
7449 Aluminium U beading 210 kilogra
9999 Anodized 15 micron 2.12 L.S.
9999 Sundries including screws, fixing, carriage etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 kg.
Say
9.120.1.1 9.133 Providing and fixing, in position concealed G.I. section for wall paneling using
board of edge
9.133.1 Tapered required thickness
calcium fixed
silicate on made
board the 'W'with
profile (0.55 mm
calcareous & thick) having
siliceous a
materials
reinforced
9.133.1.110mm thickwith cellulose fiber manufactured through autoclaving process to give
Details of cost for 3.66 m x 3.05 m = 11.16 sqm.
MATERIAL
Calcium silicate board 10mm thick.= 11.16 sqm
Total = 12.28 sqm
8700 10 mm thick calcium silicate board 420 sqm
8720 Ceiling sections 0.55 mm thick having a knur 38 metre
8721 Perimeter channel having one flange of 20 m 23 metre
8722 Nylon sleeves & wooden screws (40 mm) 2.6 each
8723 Counter sunk ribbed head screw 25 mm 76 100 Nos
9999 Jointing compound 2.12 L.S.
9999 Sundries i/c rawl plug, scaffolfing etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 11.16 sqm
Cost for 1 sqm
Say
board of required
9.133.2 Multipurpose thickness
cement fixed on thewith
board reinforced 'W' suitable
profile (0.55
fibremm thick)
cement having a
screw.
9.133.2.18 mm thick cement fibre board as per IS : 14862
MATERIAL
Multipurpose non asbestos fibre cement board 8mm thick.= 11.16 sqm
Total = 12.28 sqm
237 Multi purpose fibre (high impact poly propele 220 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 11.16 sqm
Cost for 1 sqm
Say
board of required
9.133.2 Multipurpose thickness
cement fixed on thewith
board reinforced 'W' suitable
profile (0.55
fibremm thick)
cement having a
screw.
9.133.2.28 mm thick Cement bonded wood particle board as per IS:14276
Details of cost for 3.66 m x 3.05 m =11.16 sqm
MATERIAL
243 8 mm thick double skin non-asbestos multipu 215 sqm
11.16 sqm + 1.12 sqm (Add wastage 10%)

= 12.28 sqm
9999 Jointing Compound 2.12 L.S.
9999 Sundries i/c rawl plug. Scaffolding etc. 2.12 L.S.
LABOUR
111 Carpenter 1st class 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 11.16 sqm
Cost of 1 sqm
Say
boardGypsum
9.133.3 plain of required thickness
plaster board fixed on the to
conforming 'W'IS:
profile
2095 (0.55 mm thick)
Part -1:2011 having
(Board a BIS
with
certification
9.133.3.112.5 mm thick marks)
MATERIAL
Glass fibre reinforced gypsum board 12.5 mm thick.= 11.16 sqm
Total = 12.28 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 11.16 sqm
Cost for 1 sqm
Say
9.121.1.1. 9.134 Providing and fixing wire gauge shutters using stainless steel grade 304 wire
gauge
9.134.1 35 mm with
thickwire of dia 0.5 mm and average width of aperture 1.4 mm in both
shutters
9.134.1.1with ISI marked M.S. pressed butt hinges bright finished of required size
9.134.1.1Second class teak wood
2.00x1.08m = 2.16 sqm.
MATERIAL
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.1 35 mm with
shutters
9.134.1.1Kiln seasoned and chemically treated hollock wood
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.1 35 mm with
shutters
9.134.1.1Kiln seasoned selected class of sheesham wood
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.1 35 mm with
shutters
9.134.1.2With ISI marked stainless steel butt hinges of required size
2.00x1.08m = 2.16 sqm.
MATERIAL
Second class Teak wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.1 35 mm with
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.1 35 mm with
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3.5cm = 0.0152 cum.+
Total = 0.0514 cum.
Say 51.4 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.2 30 mm with
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.2 30 mm with
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.2 30 mm with
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.2 30 mm with
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.2 30 mm with
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
gauge
9.134.2 30 mm with
shutters
2.00x1.08m = 2.16 sqm.
MATERIAL
Hollock wood
2x110.5x19.7x3cm = 0.013 cum+
Total = 0.040 cum+
Total = 0.44 cum.
Say 44 cudm.
Total = 1.41 sqm.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.122.1 9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows
and clerestory
9.135.1 With 2nd class windows
teak woodusing wire62X19
beading gaugemm
with average width of aperture 1.4 mm
140x110cm =1.54sqm.
MATERIAL
Total = 1.69 sqm.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.122.2 9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows
and clerestory
9.135.2 With 12 mm mild windows
steel U using wire gauge with average width of aperture 1.4 mm
beading
140x110cm =1.54sqm.
MATERIAL
Total = 1.69 sqm.
7349 12 mm M.S. 'U' beading 14 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.123 9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built
Code in rebate made out of 16 SWG G.I. sheet (zinc
Description coating not less
Rate Unitthan 120 gm/sqm)
Details of cost for 3300/2750mm Door (9.10 metre length)
MATERIAL
8738 Factory made door frame fire rated (60 minut 1062 metre
LABOUR
9988 Sundries and carriage 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 9.1 metres
Cost of 1 No
Say
9.124 9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60
Code minutes fire rating conforming to IS:3614 (Part-II),
Description Rate tested and certified as per
Unit
Details of cost for 3.50 sqm (Door size-

1710x2050 mm)
MATERIAL
8739 Fire rated door shuttere made with 16 SWG G. 4702 sqm
LABOUR
9988 Sundries & Carriage 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.5 sqm
Cost of 1 sqm
Say
9.125 9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels &
Code partitions etc., with G.I. beading made out of
Description 1.6 mm thick G.I.
Rate Unitsheet (zinc coating
Details of cost for 2.46 sqm (Door size 1710 mm x 2050 mm)
Glazing area = 2x0.679x1.808= 2.46sqm.
MATERIAL
8760 Glass panes of required thickness having 60 mi 22500 sqm
2641 G.I U beading of 1.6 mm thick G.I sheet wit 250 metre
2642 Ceramic tape 5 x20 mm size 400 metre
LABOUR
9999 For fixing in position all complete 2.12 L.S.
9988 Sundries and carriage & Calcium Silicate Bloc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.46 sqm
Cost of 1 sqm
Say
9.126 9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body,
Code Trim Latch & Lock on back side of the Panic
Description Latch of reputed
Rate brand and
Unit
MATERIAL
8744 Panic Bar / latch (Double point) 5200 each
LABOUR
9977 Sundries (screws and carriage) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
9.127.1 9.14 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails,
including
9.140.1 12mm thicka coat of approved
commercial primer on one
ply conforming to ISface, andBWR
: 1328 fixedtype
on wooden /steel
MATERIAL
2413 12 mm commercial ply 510 sqm
Priming coat
13.50.1 Rate as per Item No 13.50.1 of SH: Finishing 61.45 sqm
9999 Sundries and screws etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
9.128 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5
Code mm (± 0.2 mm), made out of single piece extruded
Description Rate PVC profile,
Unitwith mitred cut
MATERIAL
8014 Factory made door frame of size 50x47mm with 298.74 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metres
Cost of 1 No
Say
9.129.1 9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single
piecedecorative
9.142.1 Non extruded soild
finishPVC profiles,
(matt finish) 5 mm (± 0.2 mm) thick, having styles & rails
Details of cost for of one shutter 2.20x1.08m = 2.38 sqm
MATERIAL
8735 35 mm thick factory made solid panel PVC door 2295 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.129.2 9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single
piece extruded
9.142.2 Decorative soild
finish PVCgrained
(wood profiles, 5 mm (± 0.2 mm) thick, having styles & rails
finish)
MATERIAL
8736 35 mm thick factory made solid panel PVC door 2707 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.13 9.143 Providing and Fixing factory made uPVC door frame, made of uPVC exturded
Code sections, of size 65 mm x 55 mm with wall thickness
Description Rate 2.0 mmUnit
(± 0.2 mm), corners
MATERIAL
8745 65 mm x 55 mm x 2 mm thick Factory made doo 364 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metres
Cost of 1 No
Say
9.131 9.144 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails
Code made of PVC hollow section of size 100 mm
Description x 37 mm with wall
Rate Unitthickness 2 mm (±
MATERIAL
8746 37 mm thick Factory made shutter with style,ra 2479 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.132 9.145 Providing and Fixing factory made PVC door frame made of PVC extruded
Code sections of size 75 mm x 53 mm, having wall
Description thickness 2.0 mm
Rate Unit (± 0.2 mm). Both
MATERIAL
8747 75 mm x 53 mm x 2.0 mm thick Factory made do 413 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 metres
Cost of 1 No
Say
9.133 9.146 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails
Code made of PVC hollow extruded printed and laminated
Description Rate sectionUnit
having overall
MATERIAL
8748 37 mm thick Factory made fusion welded shutte 2703 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.134.1 9.147A Providing and fixing factory made uPVC white colour casement/casement cum
fixed glazed
9.147A.1 Casement windows
window comprising
single of S.S.
panel with uPVC multi-chambered
friction hinges (300frame,
x 19 x sash and
1.9 mm),
Code made of (small series) frame 47 x 50 mm & Rate
Description sash 47 x 68 mmUnit
both having wall
Detail of Cost for uPVC casement window size 0.50 x 1.35 m = 0.68 s
MATERIAL
8121 uPVC extruded (small series) casement wind 280 metre
i/c 5% wastage
i/c 5% wastage
8125 uPVC extruded glazing bead of appropriate 100 metre
i/c 5% wastage
Galvanized iron reinforcement for Casement window frame & sash i/c
3991 Galvanized iron (1.6 ± 0.2 mm) thick reinforc 70 metre
Window Frame = 3.59 M + Window Sash =

3.38 M
Total = 6.97 M
7390 EPDM Gasket for uPVC window/door 15 metre
i/c 5% wastage
3995 G.I fasteners 100 x 8 mm 15 each
8757 Stainless steel friction hinges (SS-304 grade 260 each
8750 Zinc alloy (white powder coated) casement h 130 each
9999 Sundries, plastic packers, plastic caps, SS sc 2.12 L.S.
LABOUR
162 Labour for fabrication of uPVC extruded casemen 534 sqm
163 Labour for installation of uPVC extruded case 773 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.68 sqm
Cost of 1.00 sqm
Say
fixed glazed
window comprising
double of uPVC
panels with S.S. multi-chambered frame,
friction hinges (300 x 19 sash
x 1.9 and
mm)
Code made of
Description(small series) frame 47 x 50 mm, sash
Rate 47 x 68 mm & mullion
Unit 47 x 68
Detail of cost for uPVC casement window size 1.00 x 1.35 m = 1.35 sq
MATERIAL
i/c 5% wastage
i/c 5% wastage
Window Sash = 7.44 M + Window Mullion =

1.42 M
Total = 8.86 M
i/c 5% wastage
Galvanized iron reinforcement for Casement window frame, sash & mul

6.64 M + Window Mullion = 1.35 M
Total = 12.63 M
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.35 sqm
Cost of 1.00 sqm
Say
fixed glazed
window comprising
double of uPVC
panels with multi-chambered
top fixed frame,
with S.S. friction sash (350
hinges and x 19
Code x 1.9 mm) made of (small series) frame 47 xRate
Description 50 mm, sash 47Unitx 68 mm & mullion
Detail of cost for uPVC casement window size 1.20 x 1.80 m = 2.16 s
MATERIAL
i/c 5% wastage
i/c 5% wastage

2.52 M
Total = 9.80 M
i/c 5% wastage

Total = 15.05 M
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm
Cost of 1.00 sqm
Say
fixed glazed
window comprising
single of S.S.
panel with uPVC multi-chambered
friction hinges (400frame,
x 19 x sash andmade
1.9 mm)
Code of (big series)frame
Description 67 x 60 mm & sash 67 x 80
Rate mm both having
Unit wall thickness of
Detail of cost for uPVC casement window size 0.70 x 1.35 m = 0.95 s
MATERIAL
8126 uPVC extruded (big series) casement windo 351 metre
i/c 5% wastage
8128 uPVC extruded (big series) casement window 469 metre
i/c 5% wastage
8130 uPVC extruded glazing bead of appropriate d 135 metre
i/c 5% wastage
Galvanized iron reinforcement for Casement window frame & sash i/c

3.72 M
Total = 7.73 M
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.95 sqm
Cost of 1.00 sqm
Say
9.147A.5 fixed glazed
Casement windows
window comprising
double of uPVC
panels with S.S. multi-chambered frame,
friction hinges (350 x 19 sash
x 1.9 and
mm)
Code made of (big
Description series)frame 67 x 60 mm & sash /
Rate mullion 67 x 80
Unitmm both having
Detail of Cost for uPVC casement window size 1.20 x 1.35 m = 1.62 s
MATERIAL
i/c 5% wastage
i/c 5% wastage

1.42 M
Total = 9.13 M
i/c 5% wastage
Total = 13.83 M
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.62 sqm
Cost of 1.00 sqm
Say
fixed glazed
9.147A.6 Casement cumwindows comprising
fixed panel windowofhaving
uPVC multi-chambered frame, sash
both end single casement and
panel,
Code middle fixed panels and at top completely fixed
Description Rate ventilator with
UnitS.S friction hinges
Detail of cost for uPVC casement cum fixed window size 2.50 x 1.60 m
MATERIAL
i/c 5% wastage
i/c 5% wastage

8.93 M
Total = 15.17 M
i/c 5% wastage
Total = 21.90 M
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 4.00 sqm
Cost of 1.00 sqm
Say
9.135.1 9.147B Providing and fixing factory made uPVC white colour fixed glazed
windows/ventilators
9.147B.1 Fixed comprising
window / ventilator made ofof(small
uPVC series)
multi-chambered
frame 47 x frame
50 mmand mullion47 x
& mullion
Code 68 mm both having wall thickness of 1.9 ± 0.2
Description mm and single
Rate glazing bead of
Unit
Detail of cost for uPVC fixed window size 1.20 x 0.50 m = 0.60 sqm.
MATERIAL
Galvanized iron reinforcement for Fixed window frame & mullion i/c
Window Frame = 3.27 M + Window Mullion = 0.98 M, Total = 4.25 M
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm
Cost of 1.00 sqm
Say
9.136.1 9.147C Providing and fixing factory made uPVC white colour casement/ Casement cum
fixed glazed
9.147C.1 Casement door
door comprising
with 3D hingesofmade
uPVCofmulti-chambered frame,
(big series) frame sash
67 x 64 mmand mullion
& sash 67
Code x 110 mm
Description both having wall thickness of 2.3 ± 0.2
Rate mm and single
Unit glazing bead /
Detail of cost for uPVC casement door size 0.90 x 2.10 m = 1.89 sqm.
MATERIAL
8127 uPVC extruded (big series) casement door f 396 metre
i/c 5% wastage
8129 uPVC extruded (big series) casement door s 568 metre
i/c 5% wastage
i/c 5% wastage
Galvanized iron reinforcement for
i/c 5% wastage
3993 Galvanized iron (1.6 ± 0.2 mm) thick reinfor 100 metre
i/c 5% wastage
i/c 5% wastage
8116 Zinc alloy (white powder coated) 3D Hinges 455 each
8117 Zinc alloy (white powder coated) handles with 2635 each se
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.89 sqm
Cost of 1.00 sqm
Say
9.136.2 9.147C Providing and fixing factory made uPVC white colour casement/ Casement cum
fixed glazed
9.147C.2 Casement door
door comprising
with top hung of uPVC multi-chambered
ventilator with 3D and S.S.frame,
frictionsash and (400
hinges mullion
x 19
Code x 1.9 mm)
Description made of (big series) frame 67 x 64 mm,
Rate sash 67 x 110
Unit mm & mullion 67
Detail of cost for uPVC casement door size 0.90 x 2.70 m = 2.43 sqm
MATERIAL
8127 uPVC extruded (big series) casement door f 396 metre
i/c 5% wastage
8129 uPVC extruded (big series) casement door s 568 metre
i/c 5% wastage
i/c 5% wastage
Door sash (67 mm x 80 mm) = 2.60 M +

Door mullion (67 mm x 80 mm ) = 0.95 M
Total = 3.55 M
i/c 5% wastage
Casement door frame, ventilator sash & mullion i/c 5% wastage
Door Frame = 6.08 M + Ventilator Sash =

2.30 M + Mullion = 0.88 M
Total = 9.26 M
3993 Galvanized iron (1.6 ± 0.2 mm) thick reinfor 100 metre
i/c 5% wastage
i/c 5% wastage
8116 Zinc alloy (white powder coated) 3D Hinges 455 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.43 sqm
Cost of 1.00 sqm
Say
9.137.1 9.147D Providing and fixing factory made uPVC white colour sliding glazed window upto
9.147D.1 1.50
Two m in height
track dimension
two panels slidingcomprising
window madeof uPVC multi-chambered
of (small series) frameframe with
52 x 44 mmin-
Code &sash 32 x 60 mm both having wall thickness
Description Rateof 1.9 ± 0.2 mm
Unitand single glazing
Detail of cost for uPVC sliding window size 1.20 x 1.35 m = 1.62 sqm.
MATERIAL
8133 uPVC extruded (small series) 2 track sliding 314 metre
i/c 5% wastage
i/c 5% wastage
8140 uPVC extruded interlock of appropriate dime 88 metre
i/c 5% wastage
8131 uPVC extruded glazing bead of appropriate dim 66 metre
i/c 5% wastage
2 track sliding window frame & Sash i/c 5% wastage

7.30 M
Total = 12.36 M
i/c 5% wastage
8773 Wool pile/ weather pile strip for uPVC sliding 20 metre
i/c 5% wastage
8751 Zinc alloy (white powder coated) touch lock 114 each
8752 Zinc alloy body with single nylon roller (weig 60 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.62 sqm
Cost of 1.00 sqm
Say
1.50 mtrack
9.147D.2 Three in height
threedimension comprising
panels sliding windowofwith
uPVCfly multi-chambered frame
proof SS wire mesh with
(Two in-
nos.
Code glazed & one no. wire mesh panels) made of
Description (small series) frame
Rate Unit 92 x 44 mm &
MATERIAL
8135 uPVC extruded (small series) 3 track slidin 418 metre
i/c 5% wastage
i/c 5% wastage
8140 uPVC extruded interlock of appropriate dime 88 metre
i/c 5% wastage
i/c 5% wastage
3 track sliding window frame & sash i/c 5% wastage

10.94 M
Total = 20.46 M
i/c 5% wastage
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.62 sqm
Cost of 1.00 sqm
Say
9.147D.3 1.50
Two m in height
track dimension
two panels slidingcomprising of uPVC
window made multi-chambered
of (big series) frame 67frame with&in-
x 50 mm
Code sash 46 x 62 mm both having wall thickness
Description of 2.3 ± 0.2 mmUnit
Rate and single glazing
Detail of cost for uPVC sliding window size 1.50 x 1.35 m = 2.03sqm
MATERIAL
8134 uPVC extruded (big series) 2 track sliding w 424 metre
i/c 5% wastage
i/c 5% wastage
8141 uPVC extruded interlock of appropriate dimen 98 metre
i/c 5% wastage
i/c 5% wastage
2 track sliding window frame i/c 5% wastage)
2 track sliding window sash i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.03 sqm
Cost of 1.00 sqm
Say
9.147D.4 1.50
Threemtrack
in height
panels sliding windowofwith
uPVC
fly multi-chambered frame
proof S.S wire mesh with
(Two in-
nos.
Code glazed & one no. wire mesh panels) made of
Description (big series) frame
Rate Unit116 x 45 mm &
MATERIAL
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
3 track sliding window frame i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.43 sqm
Cost of 1.00 sqm
Say
9.147D.5 1.50
Threemtrack
in height
panels sliding windowofmade
uPVCofmulti-chambered
(big series) frameframe
116 xwith in-
45 mm
Code & sash 46 x 62 mm both having wall thickness
Description Rate of 2.3 ± 0.2 mm
Unitand single glazing
MATERIAL
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.43 sqm
Cost of 1.00 sqm
Say
9.138.1 9.147E Providing and fixing factory made uPVC white colour sliding glazed window
above
9.147E.1 Two 1.50two
track m in heightsliding
panels dimension comprising
window of uPVC
made of (big multi-chambered
series) frame
frame 67 x 50 mm &
MATERIAL
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
8773 Wool pile/ weather pile strip for uPVC slidin 20 metre
i/c 5% wastage
8118 Zinc alloy (white powder coated) handles along 1535 each se
8753 Stainless Steel (SS - 304) with adjustable dou 105 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.60 sqm
Cost of 1.00 sqm
Say
9.138.2 9.147E Providing and fixing factory made uPVC white colour sliding glazed window
above
9.147E.2 Two 1.50four
track m inpanels
heightsliding
dimension comprising
window made of of uPVC
(big multi-chambered
series) frame
frame 67 x 50 mm &
MATERIAL
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
8142 uPVC extruded inline adaptor of appropriate 98 metre
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
8118 Zinc alloy (white powder coated) handles along 1535 each se
8754 Zinc alloy (white powder coated) cresent lock 110 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7.20 sqm
Cost of 1.00 sqm
Say
9.139.1 9.147F Providing and fixing factory made uPVC white colour sliding glazed door
9.147F.1 comprising
Two track two of uPVC
panelsmulti-chambered
sliding door made frame with
of (big in-built
series) roller67track
frame x 50 and
mm sash
& sash
Code 46 x 82 mm
Description both having wall thickness of 2.3 ±
Rate 0.2 mm and single
Unit glazing bead /
Detail of cost for sliding door size 2.00 x 2.10 m = 4.20 sqm.
MATERIAL
i/c 5% wastage
8143 uPVC extruded 2 track sliding door sash/ 3 tr 385 metre
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 4.20 sqm
Cost of 1.00 sqm
Say
9.147F.2 comprising
Two track fourof uPVC multi-chambered
panels sliding door made frame withseries)
of (big in-builtframe
roller67
track
x 50and
mmsash
& sash
Code 46 x 82 mm
Description both having wall thickness of 2.3 ±
Rate 0.2 mm and single
Unit glazing bead /
Detail of cost for uPVC sliding door size 4.00 x 2.10 m = 8.40 sqm.
MATERIAL
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
8142 uPVC extruded inline adaptor of appropriate 98 metre
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
8754 Zinc alloy (white powder coated) cresent lock 110 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 8.40 sqm
Cost of 1.00 sqm
Say
comprising
9.147F.3 Three track of uPVC
three multi-chambered
panels frameofwith
sliding door made (bigin-built
series)roller
frametrack
116 and
x 45 sash
mm &
Code sash 46 x
Description 82 mm both having wall thickness of
Rate 2.3 ± 0.2 mm and
Unit single glazing
Detail of cost for uPVC sliding door size 3.00 x 2.10 m = 6.30 sqm.
MATERIAL
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
3 track sliding door frame i/c 5% wastage
3 track sliding door sash i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6.30 sqm
Cost of 1.00 sqm
Say
comprising
9.147F.4 Three track of uPVC
three multi-chambered
panels frame
sliding door with flywith in-built
proof roller
S.S wire track
mesh andnos.
(Two sash
Code glazed &
Descriptionone no. wire mesh panels) made of (big
Rate series) frame
Unit 116 x 45 mm &
Detail of cost for uPVC sliding door size 2.00 x 2.10 m = 4.20 sqm
MATERIAL
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
3 track sliding door frame i/c 5% wastage
3 track sliding door sash i/c 5% wastage
i/c 5% wastage
i/c 5% wastage
8749 Zinc alloy (white powder coated) touch lock wi 133 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 4.20 sqm
Cost of 1.00 sqm
Say
9.140.1 9.148 Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top
hungx uPVC
9.148.1 200 windows,
19 x 1.9 mm of approved quality, with necessary stainless steel screws
MATERIAL
8755 Stainless steel friction hinge of size 200 mm 212 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
hungx uPVC
9.148.2 250 windows,
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
hungx uPVC
9.148.3 300 windows,
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
hung uPVC windows, of approved quality, with necessary stainless steel screws
9.148.4 350 x 19 x 1.9 mm
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
hungx uPVC
9.148.5 400 windows,
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.141 9.149 Providing and fixing casement handle made of zinc alloyed (white powder
Code coated) for uPVC casement window with necessary
Description Rate screws Unit
etc. complete.
MATERIAL
9999 Sundries(Screws) 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.142 9.15 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC
Code sliding window with necessary screws etc.Rate
Description complete. Unit
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.143 9.151 Providing and fixing steel roller for uPVC sliding window with necessary screws
Code etc. complete.
MATERIAL
8752 Zinc alloy rollers for uPVC windows 60 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.144 9.152 Providing and fixing steel roller for uPVC sliding door with necessary screws etc
Code complete.
MATERIAL
8753 Zinc alloy rollers for uPVC door 105 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.145 9.153 Providing and fixing steel (white power coated) crescent lock for uPVC sliding
Code window/ door with necessary screws etc. complete.
MATERIAL
8754 Zinc alloy (white powder coated) casement l 110 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
9.146 9.154 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6
Code mm hollow MS tube, placed along the walls,
Description ceiling and floor
Rate in a grid pattern
Unit
Details of cost for 2.4x2.4 m panel=5.76m² or 58.35 Kg
MATERIAL
M.S.Pipe section @ 10.13 kg/sqm=58.35

Kg+
Add 5% wastage = 2.92 Kg
Total = 61.27 Kg
8776 Stainless steel dash fastener of 8 mm dia and 17 each
Steel primer
5 x 2 x 2.40 x 0.05 x 4 = 4.80 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 58.35 kg
Cost of 1 kg
Say
9.147 9.155 Providing and fixing panelling or paneling and glazing in panelled or panelled
Code and glazed shutters for doors, windows and
Description clerestory windows
Rate Unit ( area of
Detail of cost for a door with 2/3rd paneling.

200 x 108 cm = 2.16 sqm
Pannel area 4x45.1x36.55cm = 0.66 sqm
MATERIAL
Both side laminated 12mm thick

MDF Board 4x47.2x38.65 cm = 0.73 sqm
Adding 10% wastage = 0.07 sqm
Total= 0.80 sqm
2484 Pre-laminated with decorative lamination on b 469 sqm
9999 Sundries (Carriage of MDF board) 2.12 L.S.
LABOUR
111 Carpenter 1 st class 784 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
9.148.1 9.156 Providing and fixing Pre -laminated medium density fibre board exterior grade
(Grade-I) IS:14587:1998
9.156.1 Pre-laminated marked,
with decorative to frame,on
lamination backing or studding
both side exterior with
Gradescrews etc.
- I MDF
Code Board 12
Descriptionmm thick confirming to IS:14587 Rate Unit
Detail of cost for 350x200 cm = 7sqm
MATERIAL
12 mm thick both side laminated board= 7.00
sqm
Add for wastage @5% = 0.35 sqm
Total= 7.35 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7.00 sqm.
Cost of 1 sqm.
Say
9.148.2 9.156 Providing and fixing Pre -laminated medium density fibre board exterior grade
9.156.2 (Grade-I) IS:14587:1998
Pre-laminated marked,
with decorative to frame,on
lamination backing or studding
both side exterior with
Gradescrews etc.
- I MDF
Code Board 18 mm thick confirming to IS:14587 Rate
Description Unit
Detail of cost for 350x200 cm = 7 sqm
MATERIAL
18 mm thick both side laminated board= 7.00

sqm
Add for wastage @5% = 0.35 sqm
Total= 7.35 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7.00 sqm.
Cost of 1 sqm.
Say
9.149.1 9.157 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998
9.157.1 marked, with one
Pre-laminated withside decorative
decorative lamination
lamination oneother side other
side and balancing lamination
side balancing
Code lamination exterior Grade - I MDF Board 18Rate
Description mm thick confirming
Unit to IS:14587
Detail of cost for 4 Nos. 75x20 cm shelves = 0.60 sqm
MATERIAL
18 mm Thick MDF Board out side laminated

=
0.60 sqm
Total= 0.63 sqm
2488 Pre-laminated with decorative lamination one 582 sqm
PVC edge bending tape 2.00 mm thick 4X0.75 =3.00 metre
2489 PVC edge bending tape 2.00 mm thick 21 metre
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm.
Cost of 1 sqm.
Say
9.149.2 9.157 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998
9.157.2 marked, with one
Pre-laminated withside decorative
decorative lamination
lamination oneother side other
side and balancing lamination
side balancing
Code lamination exterior Grade - I MDF Board 25Rate
Description mm thick confirming
Unit to IS:14587
Detail of cost for 4 Nos. 75x20 cm shelves = 0.60 sqm
MATERIAL
25 mm Thick MDF Board outside laminated

=
0.60 sqm
Total= 0.63 sqm
PVC edge bending tape 2.00 mm thick 4X 0.75 =3.00 metre
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm.
Cost of 1 sqm.
Say
9.150.1 9.158 Providing and fixing in wall lining medium density fibre board IS: 14587:1998
marked,
9.158.1 12 Pre-laminated one side decorative lamination and other side balancing
mm thick.
MATERIAL
12 mm thick MDF Board Grade-I ,one side

laminated = 10.00 sqm
Add wastage @10 % = 1.00 sqm
Total= 11.00 sqm
LABOUR
114 Beldar 645 day
7048 Rawl plug 50 mm (designation 10 nos) 22 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 sqm.
Say
marked,
mm thick.
MATERIAL

Total= 11.00 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 sqm.
Say
marked,
mm thick.
MATERIAL

Total= 11.00 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 sqm.
Say
9.151 9.159 Providing and fixing 25mm thick pre-laminated medium density fibre board
Code exterior grade ( Grade-I) IS:14587:1998 marked
Description Rate with one side decorative and
Unit
Detail of Cost for 2.20 sqm (2.20 m x 1.00 m)
MATERIAL
PVC edge bending tape 2.00 mm thick

2x(2.20+1.00)=6.40 metre
Fitting for a door of 2.20 m x1.00 m

Total = 2( 2.20) = 4.40 metre
608 Nickel plated bright finished mild steel pian 39 metre
LABOUR
156 Carpenter (average) 749 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.20 sqm.
Cost of 1 sqm.
Say
9.152.1 9.16 Providing and fixing skirting with Pre-laminated medium density fibre board
exterior
9.160.1 18 grade (Grade-I) conforming to IS: 14587:1998 marked, with (one side
mm thick.
Detail of cost for skirting 200 mm wide & 30

m long
Area 0.20 mx30 m = 6.0 sqm
Area 0.20 m x30 m = 6.0 sqm
Add wastage @ 10 % = 0.60 sqm
Total = 6.60 sqm
MATERIAL
9999 Sundries (Labour for drilling hole) 2.12 L.S.
LABOUR
114 Beldar 645 day
9999 Sundries ( screws and sand paper) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6.00 sqm.
Cost of 1 sqm.
Say
9.152.2 9.16 Providing and fixing skirting with Pre-laminated medium density fibre board
exterior
9.160.2 25 grade (Grade-I) conforming to IS: 14587:1998 marked, with (one side
mm thick.
Detail of cost for skirting 200 mm wide & 30

m long
Area 0.20 mx30 m = 6.0 sqm
MATERIAL:
Area 0.20 m x30 m = 6.0 sqm
Add wastage @ 10 % = 0.60 sqm
Total = 6.60 sqm
MATERIAL
9999 Sundries (Labour for drilling hole) 2.12 L.S.
LABOUR
114 Beldar 645 day
9999 Sundries ( screws and sand paper) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6.00 sqm.
Cost of 1 sqm.
Say
9.153 9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on
horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of
Details of cost for 3.5 Sqm
(Door size-1710 x 2050 mm i.e. 5.810 metre)
MATERIAL
8017 Fire Rated door Frame made with 1.6 mm thick 1200 metre
LABOUR
9999 Labour for fixing in position all complete 2.12 L.S.
9988 Carriage and sundries ( Fasteners , sims , Hol 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.81 metre
Cost of 1 metre
Say
9.154 9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min
Code Fire Rating confirming to IS:3614 (Part II) orRate
Description EN1634-1:1999,Unit
tested and certified
(Door size-1710 x 2050 mm)
MATERIAL
8018 Fire Rated door shutter made with 1.6 mm thic 6000 sqm
8101 Stainless steel ball bearing hinges of size 450 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.5 sqm
Cost of 1 sqm
Say
9.155 9.163 Providing and fixing non load bearing fixed frame for fire resistant glazed
Code Partition for 120 minutes Fire Rating, madeRate
Description out to a profile of dimension 60mm x
Unit
(Door size-1710 x 2050 mm i.e. 5.810 metre)
MATERIAL
8017 Fire Rated door Frame made with 1.6 mm thick 1200 metre
LABOUR
9988 Sundries and carriage ( Fasteners , sims , Hol 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.81 metre
Cost of 1 metre
Say
9.156 9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels &
Code partitions etc., with G.I. beading made out of
Description 1.6 mm thick G.I.
Rate Unitsheet (zinc coating
(Door size-1710 x 2050 mm)
MATERIAL
Glazing area- 2x0.679x1.808= 2.46 m2
2640 Clear, toughened, interlayered, non-wired fir 25500 sqm
2641 G.I. U beading of 1.6 mm thick G.I. Sheet wit 250 metre
2642 Ceramic tape 5x20 mm size 400 metre
LABOUR
9988 Sundries and carriage & Calcium Silicate Bloc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.46 sqm
Cost of 1 sqm
Say
9.157.1 9.165 Providing and fixing bright /matt finished Stainless Steel handles of approved
quality
9.165.1 125 mm& make with necessary screws etc all complete.
MATERIAL
554 125mm SS fancy handles for kitchen cabinet 640 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
quality & make with necessary screws etc all complete.
9.165.2 100mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
quality
9.165.3 75 mm & make with necessary screws etc all complete.
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
9.158.1 9.166 Providing and fixing 18mm thick both sides Pre-laminated cement bonded
wood
9.166.1 18 mm particle
thick board as per IS : 15786:2008 of approved brand and shade with
75 x 20 cm shelves = 0.60 sqm
MATERIAL
4 x 75 x 20 cm = 0.60 sqm
Add wastage @ 5% = 0.03 sqm Total = 0.63 sqm
9656 18mm thick both sides Pre-laminated cement 650 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm
Cost of 1 sqm
Say
9.159 9.167 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood
particle board as per IS : 15786:2008 of approved brand and shade with
Details of cost for 350 x 200 cm = 7 sqm
MATERIAL
6 mm thick board = 7.00 sqm
9657 6mm thick both sides Pre-laminated cement b 455.6 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7 sqm
Cost of 1 sqm
Say
9.16 9.168 Providing and fixing cupboard shutter with 19mm thick one side decorative and
Code other side balancing lamination factory pressed
Description Rate BWP gradeUnit
marine ply as per IS
MATERIAL
19 mm thick prelaminated ply = 2.20 sqm
9658 19mm thick one side decorative and other sid 1500 sqm
9977 Carriage of shutter 2.12 L.S.
2489 PVC edge bending tape 21 metre
2 x (2.00+1.10) = 6.20 metre
LABOUR
For fixing shutter and PVC edge bending tape
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.2 sqm
Cost of 1 sqm
Say
9.161 9.169 Providing and fixing 19mm thick both side balancing lamination factory
Code pressed BWP grade marine ply as per IS 710
Description of approved brand
Rate Unit boxes, shelves,
75 x 20 cm shelves = 0.60 sqm
MATERIAL
19 mm thick particle board 4 x 75 x 20 cm = 0.60 sqm
9659 19mm thick both side balancing lamination fa 1450 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm
Cost of 1 sqm
Say
9.162.1 9.17 Providing and fixing stainless steel fancy handle of approved make fixed
withmm
9.170.1 200 SS screws etc. complete as per direction of Engineer-in-charge.
MATERIAL
9660 Stainless steel fancy handle 1000 10 nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
9.163 9.171 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges
Code (hydraulic type) of approved make/brand toRate
Description cupboard shutters
Unitwith full threaded
MATERIAL
9661 Soft closing stainless steel hinges 1550 10 sets
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
9.164 9.172 Providing and fixing stainless steel soft closing heavy type telescopic drawer
Code channels of approved make 500 mm long with
Description Rate screws etc.Unit
complete as per
Details of cost for 10 sets.
MATERIAL
9662 Stainless steel telescopic drawer channels 5 535 set
9999 Sundries including screws and fixing charges 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sets
Cost of 1 set
Say
9.165 9.173 Providing and fixing readymade 304 grade stainless steel Modular kitchen
Code basket and accessories such as right angleRate
Description basket (Plain Cup
Unit& Saucer, plant,
Details of cost for 2 kg
MATERIAL
Qty = 2 kg + Add wastage @ 5% = 0.10

Total = 2.1 kg
9663 Stainless steel (Grade-304) basket (readymad 260 kg
9999 Sundries including screws and fixing charges 2.12 L.S.
LABOUR
For fixing
102 Blacksmith 1st class 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 kg
Cost of 1 kg
Say
9.166 9.174 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of
Code approved quality for cupboard/wardrobe shutters
Description Rate includingUnit
necessary synthetic
MATERIAL
LABOUR
For fixing
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 matre
Cost of 1 metre
Say
10.1 10.1 Structural steel work in single section, fixed with or without connecting plate,
Code including cutting, hoisting, fixing in position
Description and applying aUnit
Rate priming coat of
Details of cost for one qunital
MATERIAL
Steel = 1.00q
Add wastage @ 5% = 0.05q
Total = 1.05q
LABOUR
114 Beldar 645 Day
Priming Coat
13.50.3 Rate as per Item no 13.50.3 of SH:Finishing 55.5 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1qunital
Cost of 1 Kg.
Say
10.2 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and
Code framed work, including cutting, hoisting, fixing
Description Rate in position and
Unitapplying a priming
Details of cost for a truss 7.6m clear span
(weight = 3.95 quintal)
MATERIAL
(i) Principal rafter (T-iron)
100x100x10mm @15kg/m = 142.50Kg+
Struts (angles)40x40x6mm
2x1.35=2.70m @ 3.5kg/m = 9.45kg
Total =151.95kg+
Add wastage @ 5% = 7.60kg
Total = 159.55kg. = 1.60q
(ii) Ties (flats) 50x12mm
2x2.7 = 5.4m @4.7kg/m = 25.38kg+
Ties central (flats) 50x10mm
1x2.28 = 2.8m @3.90kg/m = 10.92kg.+
Braces (flats)40x10mm
2x1.84 = 3.68m @3.9kg/m = 14.35kg.
Total = 50.65kg+
Total = 53.18kg. = 0.53q
1009 Flats exceeding 10 mm in thickness 4950 quintal
(iii) Gusset plates 10mm thick
1x0.74x0.35m = 0.259sqm.+
shoe 4x0.46x0.46 = 0.845sqm.
Total = 1.104 sqm.
1.104sqm.@ 78.4kg/m = 86.55kg.
12mm plates at the point of principal rafter and strut-
2x0.3x0.2 = 0.12sqm.+
Tie beam, brace and strut-
2x0.5x0.3 = 0.30sqm.+
Sole plates-
2x0.46x0.46 = 0.42sqm.+
Anchor plate-
2x0.46x0.1 = 0.09sqm.
Total = 0.93 sqm.
Say 1.00 sqm.
1.0sqm. @ 94.4kg/m = 94.40kg.
Total = 180.95kg.
Total = 190.00kg or 1.90q
1010 Mild steel plates 5400 quintal
(iv) 16mm dia. 50mm long rivets = 56 nos.+
Add wastage @ 5 % = 2.8 nos.
Total = 58.8 nos.
1020 Mild steel rivets 5100 quintal
(v) 20mm dia. holding down bolts
4 Nos.x460mm = 1840mm +
Add wastage @ 5% = 92mm
Total =1932 mm
1221 20 mm dia holding down bolts 6100 quintal
(0.160+0.053+0.091 +0.099+0.007+0.005)
=0.415 tonne
LABOUR
114 Beldar 645 Day
Applying priming coat-
T.Iron 9.5x0.4 = 3.80sqm.+
Struts 2.70x0.16 = 0.43sqm.+
Ties 5.4x0.124 = 0.67sqm.+
Braces 2x1.84x0.12 = 0.44 sqm.+
Ties 2.8x0.12 = 0.34 sqm.
Total = 5.68 sqm.
TOTAL
TOTAL
TOTAL
Quantity of net steel (151.95+50.65+180.95+6.5+5.04) = 395.09 kg = 3.
TOTAL
Cost for 3.95 quintal
Cost of per kg.
Say
10.3 10.3 Providing and fixing in position collapsible steel shutters with vertical channels
Code 20x10x2 mm and braced with flat iron diagonals
Description Rate 20x5 mm size,
Unit with top and
Details of cost for a gate
2.4mx1.5m = 3.6sqm.
MATERIAL
M.S. channels 18 Nos. on both sides 20x10x2mm @ 0.56kg/m
2x18x2.4 = 86.40m+
Add wastage @ 10% = 8.64m
Total = 95.04m
95.04m@0.56kg/m =53.22kg=0.53q
M.S. Tee-40x40x6mm
for bottom-1.570m+
for top = 1.725m
Total =3.295m Say 3.3m
3.3m @ 3.5kg/m = 11.55kg+
Add wastage @ 10% = 1.155 Kg.
Total = 12.705Kg. Say 0.13q
20mmx5mm flat iron diagonals 4 Nos.
4x32x0.5334 = 68.275m
68.275m @ 0.8kg/m = 54.62kg+
Add wastage @10% = 5.46kg
Total = 60.08kg = 0.60q
(0.053+0.013+0.060=0.126 tonne)
9999 Cost of rivets fixing hooks and washers 2.12 L.S.
9999 Cost of locking arrangements and handles 2.12 L.S.
4013 Pully 40 mm dia 35 each
Priming coat-
Channel - 36x0.076x2.4 = 6.57sqm.+
Tee-0.16x3.3 = 0.53sqm.+
Flats-0.05x68 = 3.40sqm.
Total = 10.50sqm.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.6sqm.
Cost per sqm.
Say
10.4 10.4 Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and
Code diagonal braces of 40x40x6 mm angle iron,Rate
Description 3 mm M.S. gusset plates at the
Unit
Details of cost for one double leaf door size
2.4x2.4m = 5.76sqm.
MATERIAL
(i) M.S. sheet 1mm thick
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Total = 49.738kg = 0.497 q
1013 Mild steel sheets for tanks 4850 quintal
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
1/2x0.26(0.04+0.3) = 0.0442
Total = 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7x1/4x0.3x0.3=0.1414sqm.
Total = 0.5910sqm.
0.5910sqm.@23.55kg/sqm.=13.92kg.+
Total = 15.31kg. or 0.153q
(iii) Angle iron
40x40x6mm @ 3.5kg/m
Sides-4x2.4=9.6m+
Bottom & top 4x1.2 = 4.8m+
Diagonals-2x2.5=5.0m+
2x2.45 = 4.9m+
Top and bottom guides
2x4.8 = 9.6m
Top guide supports
7x0.8 = 2.1m
Total = 36.0m
36m @3.5kg. per m. = 126kg.+
Total = 138.6kg. or 1.39q
Channel 25x25x6mm @ 3.05kg/m
Bottom-2.4m : 2.4x3.05
Channel 40x40x6mm @ 5.56kg/m
0.5x5.56 = 2.78kg.
Total = 10.1kg.+
Total = 11.11kg. or 0.11q
(0.0497+0.015+0.139+0.11=0.2157 tonne)
9999 (iv) Pully guide blocks including drilling holes 2.12 L.S.
969 Pully 25 mm dia 48 each
9999 (vi) Handles and locking arrangements 2.12 L.S.
9999 (vii) Bolts and rivets 2.12 L.S.
9999 (viii)Cement concrete 2.12 L.S.
Priming coat-
M.S. Sheet 2x5.76 = 11.52+
Angle iron 0.16x36 = 5.76+
Channel-0.15x2.4=0.36+
0.24x0.5=0.12
Total = 17.76 Say 18.0sqm.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.76 sqm.
Cost per sqm.
Say
10.5.1 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle
iron and
10.5.1 Using 3 mm
M.S. M.S.40x40x6
angels gusset plates
mm foratdiagonal
the junctions
bracesand corners, all necessary
Details of cost for a double leaf door of size
2.4mx2.4m=5.76sqm.
MATERIAL
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Total = 49.738kg = 0.497 q
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
1/2x0.26(0.04+0.3) = 0.0442
Total = 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7x1/4x0.3x0.3=0.1414sqm.
Total = 0.5910sqm.
0.5910sqm.@23.55kg/sqm.=13.92kg.+
Total = 15.31kg. or 0.153q
(iii) Angle iron:40x40x6mm @3.5kg/m
Sides-4x2.40 = 9.6m+
Top & bottom-4x1.20=4.8m+
Diagonals-2x2.5=5.0m+
2x2.45 = 4.9m+
Total = 24.30m+
Total =26.73m
26.73m @ 3.5kg. per m. = 93.56kg=0.936q
(0.0497+0.0153+0.0936 tonne) = 0.1586 t
1036 Iron pintels including welded pin 37 each
1222 Mild steel sheets with bolts and nuts to rest on 120 each
1019 Mild steel hooks 32 each
9999 Locking arrangements and handles 2.12 L.S.
9999 Rivets 2.12 L.S.
Priming coat-
M.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
Total = 15.41
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.76 sqm.
Cost per sqm.
Say
10.5.2 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle
iron and
10.5.2 Using 3 mm
flats M.S. gusset
30x6mm platesbraces
for diagonal at the junctions and
and central corners,
cross pieceall necessary
Details of cost for a double leaf door of size 2.4x2.4m = 5.76sqm.
MATERIAL
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Total = 49.738kg = 0.497 q
(ii) Gussets plates-3.00mm thick vide (ii) in item 10.6 = 0.5910sqm.+
at mid height = 4x0.0528 = 0.2112sqm.
Total = 0.8022sqm.+
Total =0.8824sqm.@ 23.55 kg/sqm =20.78 kg
Grand Total = 0.2078 qtl
(iii) Angle iron:40x40x6mm @3.5kg/m
Sides-4x2.40 = 9.6m+
Top & bottom-4x1.20=4.8m+
Total = 14.40m+
Total = 15.84m
15.84m @ 3.5kg. per m. = 55.44kg = 0.554qtl
(iv) Flats 30x6mm @1.4kg/m
4x2.45=9.80m+
2x1.20=2.40m
Total = 12.20m+
Total = 13.42m
13.42m @ 1.4kg. per m. = 18.788kg. = 0.188q
Carriage of (i) (ii) and (iv)

0.0497+0.0208+0.0554+0.0188=0.1447
tonne
1036 Iron pintels including welded pin 37 each
1222 Mild steel sheets with bolts and nuts to rest on 120 each
1019 Mild steel hooks 32 each
9999 Locking arrangements and handles 2.12 L.S.
9999 Rivets 2.12 L.S.
Applying priming coat-
M.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
0.16x14.40 = 2.30+
Flats 0.072x12.2 = 0.88
Total = 14.70sqm.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.76 sqm.
Cost per sqm.
Say
10.6.1 10.6 Supplying and fixing rolling shutters of approved make, made of required size
M.S. laths,
10.6.1 80x1.25 mminterlocked
M.S. laths together
with 1.25through their
mm thick topentire
cover length and jointed together a
Details of cost for a shutter of size
3mx2.5m = 7.5sqm.
MATERIAL
973 Rolling shutter made of 80x1.25 mm machine r 1400 sqm
974 Top cover for rolling shutters 1.25 mm thick 800 metre
975 27.5 cm long wire spring grade no 2 for rolling 300 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7.5sqm.
Cost per sqm.
Say
M.S. laths,
M.S. laths together
mm thick topentire
3mx2.5m = 7.5sqm.
MATERIAL
7045 Rolling shutters of 80x1.2 mm laths 1375 sqm
7047 Top cover of Rolling shutters 1.20 mm thick 560 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7.5sqm.
Cost per sqm.
Say
M.S. laths,
M.S. laths together
mm thick topentire
3mx2.5m = 7.5sqm.
MATERIAL
7044 Rolling shutters of 80x0.90 mm laths 1300 sqm
7046 Top cover of Rolling shutters 0.90 mm thick 450 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7.5sqm.
Cost per sqm.
Say
10.7 10.7 Providing and fixing ball bearing for rolling shutters.
976 Ball bearing for rolling shutters 260 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no.
Say
10.8.1 10.8 Extra for providing mechanical device chain and crank operation for operating
rolling shutters.
10.8.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area
977 Extra for mechanical devices chain and cranke 800 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
10.8.2 10.8 Extra for providing mechanical device chain and crank operation for operating
rolling shutters.
10.8.2 Exceeding 16.80 sqm in area
978 Extra for mechanical devices chain and cranked 800 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
10.9 10.9 Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar
Code instead of laths as per design approved byRate
Description Engineer-in- charge,
Unit (area of grill to
Details of cost for a shutter of width 2.5m and grill height 0.6m
Grill Area = 1.50sqm.
MATERIAL
7068 Extra for providing grilled rolling shutters wit 500 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.5sqm.
Cost per sqm.
Say
10.10.1 10.1 Fixing standard steel glazed doors, windows and ventilators in walls, including
fixing of
10.10.1 Fixing float
with glass
15x3 mmpanes with
lugs 10 cmglazing clips and special
long embedded metal-sash
in cement concrete putty
blockof
15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate
Details of cost for one door 2x0.76m = 1.52sqm.(weight 15 kg)
MATERIAL
Cement concrete blocks 15x10x10cm = 0.009 cum
LABOUR
114 Beldar 645 Day
9977 Sundries for carriage of material 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15 kg
Cost per kg
Say
10.10.2 10.1 Fixing standard steel glazed doors, windows and ventilators in walls, including
fixing of
10.10.2 Fixing float
with glasssteel
carbon panes with glazing
galvanised clips
dash and special
fastener metal-sash
of required putty
dia and sizeof
(to be
Code paid for separately)
Details of cost for one door 2x0.76m = 1.52sqm.(weight 15 kg)
LABOUR
114 Beldar 645 Day
9977 Sundries for Carriage of material 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15 kg
Cost per kg
Say
10.11.1 10.11 Providing and fixing factory made ISI marked steel glazed doors, windows and
ventilators,
10.11.1 Fixing side /top
with 15x3 mm /centre
lugs 10 hung, with
cm long beading and
embedded all members
in cement such
concrete as
block
15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate
2.075x1.175m = 2.44 sqm. (weight 30 kg).
MATERIAL
1011 Steel glazed door,window/ ventilator, all mem 54 kg
9977 Carriage of Steel Door 2.12 L.S.
Labour for fabrication
114 Beldar 645 Day
Fixing with CC 1:3:6 blocks, wooden plugs and screws or rawl plugs and
10.10.1 Rate as per Item No.10.10.1 69.35 kg
Apply steel primer (2.44x1.00 for both sides)=2.44 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 kg.
Cost of 1 kg.
Say
10.11.2 10.11 Providing and fixing factory made ISI marked steel glazed doors, windows and
ventilators,
10.11.2 Fixing side /top
with carbon /centre
steel hung, with
galvanised dashbeading and
fastener of all members
required dia such as (to be
and size
2.075x1.175m = 2.44 sqm. (weight 30 kg).
MATERIAL
1011 Steel glazed door,window/ ventilator, all mem 54 kg
9977 Carriage of Steel Door 2.12 L.S.
114 Beldar 645 Day
Labour for fixing
114 Beldar 645 day
115 Coolie 645 day
130 Mistry 784 day
128 Mate 714 day
9999 Hire charges of drill machine, scaffolding and 2.12 L.S.
Apply steel primer (2.44x1.00 for both sides)=2.44 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 kg.
Cost of 1 kg.
Say
10.12 10.12 Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type),
Code approved shape and section with screws instead
Description Rate of glazingUnitclips and metal sash
Detail of cost for 1 metre beading for doors, windows, Ventilators and
1143 Steel beading size 10 x 10 x 1.6 mm (box type 27 metre
9999 Applying priming coat 2.12 L.S.
9999 Fixing charges 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre
Say
10.13.1 10.13 Providing and fixing T-iron frames for doors, windows and ventilators of mild
10.13.1 steel
FixingTee-sections,
with 15x3 mm joints
lugs mitred and welded,
10 cm long embeddedincluding fixing
in cement of necessary
concrete block butt
Code 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
Description Rate sand : 6 graded
Unit stone aggregate
Details of cost for 17.5Kg.
MATERIAL
Tee iron 40x40x6mm = 2m+2m+1m = 5 metres
5 metres @3.5Kg/m = 17.5kg.+
Add wastage @ 5% = 0.87Kg.
Total = 18.37 kg. Say 0.18 qunital
M.S. bars 10mm = 1x1m = 1 metre
1 metre @ 0.60kg/m = 0.60Kg.+
Total = 0.63 Kg. Say = 0.006 qunital
M.S. flat 15x3mm = 6x10cm = 0.60 metre
0.6 metre @ 0.35kg/m = 0.21Kg+
Total = 0.22 kg = 0.002q.
Cement concrete block 1:3:6- 6x15x10x10cm= 0.009 cum
9999 For screws and nuts and bolts 2.12 L.S.
9999 For applying steel primer 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 17.5Kg.
Cost for 1 Kg.
Say
10.13.2 10.13 Providing and fixing T-iron frames for doors, windows and ventilators of mild
steel Tee-sections,
10.13.2 Fixing jointsgalvanised
with carbon steel mitred anddash
welded, including
fastener fixing of
of required dianecessary butt
and size (to be
MATERIAL
Tee iron 40x40x6mm = 2m+2m+1m = 5 metres
5 metres @3.5Kg/m = 17.5kg.+
Total = 18.37 kg. Say 0.18 qunital
1 metre @ 0.60kg/m = 0.60Kg.+
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 17.5Kg.
Cost for 1 Kg.
Say
10.14.1.1 10.14 Providing and fixing pressed steel door frames conforming to IS: 4351,
manufactured
10.14.1 Profile B from commercial mild steel sheet of 1.60 mm thickness, including
10.14.1.1Fixing with adjustable lugs with split end tail to each jamb
MATERIAL
4006 Pressed steel door frames (mild steel sheet 1 200 metre
frame =2+2+1m=5m
9999 Screws, nuts and bolts 2.12 L.S.
50x25x5mm. M.S. Angle for threshold 1 metre @ 2.75kg per uds =2.75
LABOUR
114 Beldar 645 Day
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5m
Cost for 1m
Say
manufactured
10.14.1 Profile B from commercial mild steel sheet of 1.60 mm thickness, including
10.14.1.2Fixing with carbon steel galvanised dash fastener of required dia and size (to be
MATERIAL
frame =2+2+1m=5m
9999 Deduct sundries for not providing adjustable l 2.12 L.S.
LABOUR
114 Beldar 645 Day
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5m
Cost for 1m
Say
manufactured
10.14.2 Profile C from commercial mild steel sheet of 1.60 mm thickness, including
MATERIAL
2+2+1m=5m
LABOUR
114 Beldar 645 Day
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5m
Cost for 1m
Say
manufactured
10.14.2 Profile C from commercial mild steel sheet of 1.60 mm thickness, including
MATERIAL
2+2+1m=5m
9999 Sundries for not providing adjustable lugs(-) 2.12 L.S.
LABOUR
114 Beldar 645 Day
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5m
Cost for 1m
Say
manufactured
10.14.3 Profile E from commercial mild steel sheet of 1.60 mm thickness, including
MATERIAL
2+2+1m=5m
LABOUR
114 Beldar 645 Day
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5m
Cost for 1m
Say
manufactured
10.14.3 Profile E from commercial mild steel sheet of 1.60 mm thickness, including
MATERIAL
2+2+1m=5m
9999 Sundries for not providing adjustable lugs (-) 2.12 L.S.
LABOUR
114 Beldar 645 Day
Steel primer
500x2(2x1.2+2x6.0+1x12.50cm)=2.69sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5m
Cost for 1m
Say
10.15.1 10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and
cupboard
10.15.1 Fixing withwith
15x3rectangular/
mm lugs 10L-Type sections,
cm long made
embedded in of 1.60 mm
cement thick M.S.
concrete blockSheet,
Code 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
Description Rate sand : 6 graded
Unit stone aggregate
MATERIAL
L- section - 32x22x28mm 1.60mm thick
2.00+2.00+1.00 = 5.00 m
Width of MS sheet = 32+24.80+22+24.80+10mm = 113.60mm = 0.113
Area of MS sheet = 0.1136x5.00x0.0016 = 0.0009088 sqm
Weight of Sheet = 0.0009088x7850 = 7.134 kg
Total = 7.491 kg Say 7.49 kg
4011 Mild steel tubes electric resistant or induction 50 kilogra
1 metre @ 0.60kg/m = 0.60Kg.
M.S. flat 15x3mm = 6x10cm = 0.60 metre
0.6 metre @ 0.35kg/m = 0.21Kg
Total = 0.22 kg = 0.002q
Cement concrete block 1:3:6- 6x15x10x10cm= 0.009 cum
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7.13Kg.
Cost for 1 Kg.
Say
10.15.2 10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and
cupboard
10.15.2 Fixing withwith rectangular/
carbon L-Type sections,
steel galvanised madeof
dash fastener ofrequired
1.60 mmdia
thick
andM.S.
sizeSheet,
(to be
paid for separately)
MATERIAL
L- section - 32x22x28mm 1.60mm thick
2.00+2.00+1.00 = 5.00 m
Width of MS sheet = 32+24.80+22+24.80+10mm = 113.60mm = 0.113
Area of MS sheet = 0.1136x5.00x0.0016 = 0.0009088 sqm
Weight of Sheet = 0.0009088x7850 = 7.134 kg
1 metre @ 0.60kg/m = 0.60Kg.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7.13Kg.
Cost for 1 Kg.
Say
10.16.1 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.)
trusses
10.16.1 Hot etc., welded
finished including cutting,
type tubeshoisting, fixing in position and applying a priming
Details of cost for a truss of span 8 metre weight = 119 kg.
MATERIAL
50mm dia. tube
Tie beam-1x8.0m = 8.00m+
Principal rafter 2x4.30m = 8.60m
Total = 16.60m
16.60m @ 5.10kg./m = 84.66kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
Total = 2x4.75=9.50m
9.50m @ 3.61kg/m = 34.60Kg.
Total = 118.96kg.
Total = 124.90Kg. Say 125 kg
Priming coat
50mm dia. tube 16.60x0.157m = 1.61sqm.
40mm dia. tube 9.50x0.125m = 1.91 sqm.
Total = 2.80 sqm.
Welding charges:-
Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties:- 2x22/7x6.03=37.90cm.+
Members:- 2x4x2x22/7x4.83=242.87cm
Total= 356.57cm say 357cm
LABOUR
For cutting, assembling & erection
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 119 Kg.
Cost for 1 Kg.
Say
trusses
10.16.2 Hot etc., seamless
finished including cutting, hoisting, fixing in position and applying a priming
type tubes
Details of cost for a truss of span 8 metre
weight = 119 kg.
MATERIAL
50mm dia. tube
Tie beam- 1 x 8.0m = 8.00m +
Principal rafter 2x4.30m = 8.60m = 16.60m
16.60m @ 5.10kg./ m = 84.66 kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
Total= 2x 4.75 = 9.50m
9.50m @ 3.61kg/m = 34.60kg.
Total = 118.96kg.
Total=124.90kg. say 125 kg
4010 Mild steel tubes hot finished seamless type 70 kilogra
Priming coat
50mm dia. tube 16.60x0.157 m = 1.61 sqm.
40mm dia. tube 9.50x 10125m = 1.91 sqm. =2.80 sqm.
Welding charges:-
Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties :- 2x22/7x6.03=37.90cm.+
Members :- 2x4x2x22/7x4.83 = 242.87cm
Total= 356.57 cm say 357 cm
LABOUR
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 119 kg
Cost for 1 kg
Say
trusses etc.,
10.16.3 Electric including
resistance cutting, hoisting,
or induction fixing
butt welded in position and applying a priming
tubes
Details of cost for a truss of span 8 metre weight = 119 kg.
MATERIAL
50mm dia. tube
Tie beam-1x8.0m = 8.00m+
Principal rafter 2x4.30m = 8.60m
Total = 16.60m
16.60m @ 5.10kg./m = 84.66kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
Total = 2x4.75=9.50m
9.50m @ 3.61kg/m = 34.60Kg.
Total = 118.96kg.
Total = 124.90Kg. say 125 kg
Priming coat
50mm dia. tube 16.60x0.157m = 1.61sqm.
40mm dia. tube 9.50x0.125m = 1.91 sqm.
Total = 2.80 sqm.
Welding charges:-
Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties:- 2x22/7x6.03=37.90cm.+
Members:- 2x4x2x22/7x4.83=242.87cm
Total= 356.57cm say 357cm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 119 Kg.
Cost for 1 Kg.
Say
10.17 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to
Code shape with hooked ends in R.C.C. slabs or Rate
Description beams during laying,
Unit including
Details of cost for 1 clamp
MATERIAL
16mm dia. M.S. bar 1m @ 1.58 kg/m
1x1.58 = 1.58Kg+
Total = 1.66 Kg.
Say 1.70kg. or 0.017q
LABOUR
114 Beldar 645 Day
9988 Sundries (Carriage, fixing and painting etc.) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 clamp
Say
10.18 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling
Code fan clamp, of internal dia 140 mm, 73 mm height,
Description Rate top lid of 1.5
Unitmm thick M.S.
Details of cost of one box clamp
MATERIAL
4012 Circular C.I. Box for ceiling fan 55 each
12mm dia. M.S. bar 80cm @ 0.9kg/m = 0.72kg+
Add wastage @ 5% = 0.036
Total = 0.756 kg. Say 0.008 q
LABOUR
114 Beldar 645 Day
9988 Sundries (Carriage, fixing and painting etc.) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 box clamp
Say
10.19 10.19 Providing and fixing mild steel round holding down bolts with nuts and washer
Code plates complete.
Details of cost for one bolt 16mm dia. and 1200mm long.
MATERIAL
l .2m @ 1.58kg/m = 1.895 kg = 0.019q
1035 Bolts and nuts above 300 mm in length 5300 quintal
Plate-100x100x6mm @ 47kg/sqm.
Wt. = 0.47kg. = 0.005q
LABOUR
9988 Carriage and labour for fixing 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.024q
Cost of 1 kg.
Say
10.2 10.2 Providing and fixing bolts including nuts and washers complete.
Details of cost for 0.10q of nuts and washers
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.10q
Cost of 1 kg.
Say
10.21 10.21 Providing and fixing M.S. rivets of sizes in position.

Details of cost for 0.10q of rivets
MATERIAL
1020 Mild steel rivets 5100 quintal
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.10q
Cost of 1 kg.
Say
10.22 10.22 Welding by gas or electric plant including transportation of plant at site etc.
Code complete.
Details of cost for one cm.
1214 Welding by gas plant 2 cm
including transportation of welding plant at

site etc. complete
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1cm.
Say
10.23.1 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate
Code wherever required, all complete
Consider a flight of staircase of 2.8m height with tread and riser of 2
MATERIAL
(i) Unequal angles as stringers-75x50x6mm
4x12.69x5.6 = 284.25 Kg.
Total = 298.46kg. Say 2.985q
(ii) unequal angles at sides -50x30x5mm
2x14x0.2x3.00=16.8kg.
Total = 17.64 kg. Say 0.176q
Total = 3.161q
(iii) plate for tread 8mm thick
14x7.5 = 105.00kg+
Total = 110.25kg. Say 1.103q
(iv) G.I. pipe for rolling 40mm
2x12.69m = 25.38m+
Total = 26.65m
1549 G.I. pipes 40 mm dia 290 metre
(v) M.S. round bars 16mm dia.
15x0.75x2x1.58 = 35.55kg.+
Total = 37.33 Kg. Say 0.373q
(3.I61 + 1.103+0.373)=4.637q = 0.4637 tonne
2271 Carriage of G.I. pipes below 100 mm dia 145.72 tonne
approx. wt. 3.72x26.65=99.14kg = 0.0991q.
23.20 m = 2320cm
LABOUR
114 Beldar 645 Day
Applying priming coat
(i) steps 2.4x14 = 33.60sqm.+
(ii) angles-4x12.69x0.25 = 12.69sqm.+
(iii) Bars and other components = 2.00 sqm. (L.S.)
Total = 48.29 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.331 qunital
Cost per kg.
Say
10.23.2 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting,
fixing
10.25.2 In in position
gratings, and
frames, applying
guard a priming
bar, ladder, coat ofbrackets,
railings, approved steeland
gates primer using
similar works
Details of 1mx1m framed guard bar grating.
MATERIAL
(i) M.S. flat 50x6mm 2.4kg/per metre
5.75x2.40 = 13.8kg.+
Total = 14.49kg. Say 14.5 kg.
(ii) 12mm dia. bars @ 0.89 kg/m
9x1= 9metre @ 0.89kg/m = 8.01kg+
Total = 8.41 kg. Say 0.084q
60 cm
LABOUR
114 Beldar 645 Day
Applying priming coat 0.6 sqm.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.218 qunital
Cost per kg
Say
10.24.1 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder
railing,
10.26.1 M.S. balcony railing, staircase railing and similar works, including applying
tube
Details of cost for hand rail of railing of two flights of staircase, length
MATERIAL
M.S. tube 40mm nominal bore (medium) =

5.40m @ 3.6lkg/m= 19.49kg
Add wastage @ 5% = 0.97 kg
Total = 20.46 kg
20.46kg = 0.205q
Priming coat 40mm dia.Tube

5.4x22/7x0.0483 = 0.82 sqm
(joints of hand rail and ballustards)
18x4x1.00 = 72cm
Labour for cutting assembling & erection
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 19.49 Kg.
Cost per 1 kg.
Say
railing, tubes
10.26.2 E.R.W. balcony railing, staircase railing and similar works, including applying
MATERIAL
E.R.W. tube 40mm nominal bore = 5.40m @

3.28kg/m= 17.31kg
Total = 18.59 kg
18.59kg = 0.0186q

5.4x22/7x0.0483 = 0.82 sqm
18x4x1.00 = 72cm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (2634 - 41.57) = 25
Cost of 17.71 Kg.
Cost per 1 kg.
Say
railing,
10.26.3 G.I. balcony railing, staircase railing and similar works, including applying
pipes
MATERIAL
G.I. pipe 40mm nominal bore = 5.40m
Total = 5.67m
(5.4m @ 3.72 kg/m = 21.09kg)

5.4x22/7x0.0483 = 0.82 sqm
18x4x1.00 = 72cm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.09 Kg.
Cost per 1 kg.
Say
10.25.1 10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash
fastener
10.27.1 10 x 60 mmof 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2),
MATERIAL
2506 Carben Steel galvanised dash fastner (min 5 270 10 nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
fastener
10.27.2 10 x 80 mmof 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2),
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
fastener
10.27.3 10 of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2),
x 120 mm
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
fastener
x 140 mm
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
fastener
x 160 mm
MATERIAL
LABOUR
114 Beldar 645 Day
9977 Sundries for Carriage of material 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos.
Cost of 1 no
Say
10.26 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,
Code channels, plates etc., including welding, grinding,
Description Rate buffing, polishing
Unit and making
Details of cost for 2kg
MATERIAL
Qty= 2kg +
Total = 2.1 kg
4001 Stainless steel (Grade-304)hollow section ro 230 kg
4002 Stainless steel bolts/square bar and plates 120 kg
LABOUR
for fabrication, assembling, errection,

welding, curvaturing, grinding, buffling etc.
114 Beldar 645 Day
9999 Welding of stainless steel section 2.12 L.S.
9999 Curvaturing, grinding, finishing, buffing 2.12 L.S.
9999 Sundries for making good wall and floors 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 kg
Cost of 1 kg.
Say
10.27.1 10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors
10.29.1 with M.S. Flat
Galvanised 15x3
M.S. mm
Wire and nuts
gauze with & bolts
0.63 mmcomplete.
dia wire and 1.4 mm aperture on both
Code sides
Details of cost for a window shutter
1.40x1.10=1.54 sqm
MATERIAL
Wire gauze 1.40x1.10=1.54 sqm

Add wastage @ 10 %=0.15 sqm
Total=1.69 sqm
M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre

Add wastage @ 5%=0.25 m
Total=5.25 m
5.25@0.35kg/m=1.84 kg
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
10.27.2 10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors
with M.S. Flat
10.29.2 Stainless steel15x3 mm304)
(grade andwire
nutsgauze
& bolts
of complete.
0.5 mm dia wire and 1.4 mm aperture on
Code both sides
Details of cost for a window shutter

1.40x1.10=1.54 sqm
MATERIAL
Wire gauze 1.40x1.10=1.54 sqm
Add wastage @ 10 %=0.15 sqm
Total=1.69 sqm
M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre

Add wastage @ 5%=0.25 m
Total=5.25 m
5.25@0.35kg/m=1.84 kg
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
10.28.1 10.3 Providing & fixing glass panes with putty and glazing clips in steel doors,
windows,
10.30.1 4.0 mm thickclerestory windows, all complete with :
glass panes
Details of cost for 10 glass panes

(area of each pane = 0.10 sqm)
MATERIAL
Area of glass panes =1.00 sqm +
Total =1.10 sqm
LABOUR
119 Glazier 714 Day
9999 Sundries, putty, glazing clips, scaffolding etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
10.28.2 10.3 Providing & fixing glass panes with putty and glazing clips in steel doors,
windows,
10.30.2 5.5 mm thickclerestory windows, all complete with :
glass panes
Details of cost for 10 glass panes

(area of each pane = 0.10 sqm)
MATERIAL
Area of glass panes =1.00 sqm +

Total =1.10 sqm
LABOUR
119 Glazier 714 Day
9999 Sundries, putty, glazing clips, scaffolding etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
10.29 10.31 Providing and fixing angle iron frames for doors, windows and ventilators of mild
Code steel Angle sections of size 35x35x5 mm, joints
Description Rate mitred and Unit
welded by angle iron
Details of cost for 1 kg
MATERIAL
Angle/ Tee iron 40x40x6 mm= 2+2+1 = 5 m

5 Meters @3.5 Kg/m = 17.5 Kg +
Add Wastage @5% =0.87Kg.
Total =18.37 Kg. Say 0.18 Quintal
1007 Structural steel such as tees, angles channels 4950 quintal
M.S. Flats 3x5 mm for fixing frame

6x0.05= 0.3 Metre @1.18 Kg/m= 0.354 Kg
Add wastage @5% = 0.018Kg
Total= 0.37Kg. Say 0.0037 Qunital
1008 Flats up to 10 mm in thickness 4850 quintal
M.S. Bars 10mm =1x1 m = 1Metre

1 Metre @0.60Kg/m =0.60Kg +
Add wastage @5% = 0.03 Kg.
Total =0.63 Kg, say 0.006 Quintal
LABOUR
103 Blacksmith 2nd class 714 day
116 Fitter (grade 1) 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 17.50 kg
Cost of 1 kg
Say
11.1.1 11.1 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm
11.1.1 1:4cement mortar,
(1 cement : 4including filling the joints with same mortar, with common burnt
coarse sand)
MATERIAL
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.1.2 11.1 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm
cement
11.1.2 1:6 mortar,
(1cement : 6including filling the joints with same mortar, with common burnt
coarse sand)
MATERIAL
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.2 11.2 Dry brick on edge flooring in required pattern with bricks of class designation 7.5
Code on a bed of 12 mm mud mortar, including filling
Description Rate joints with Jamuna
Unit sand, with
MATERIAL
983 Fine sand (zone IV) 900 cum
2261 Carriage of Fine sand (1 part badarpur sand : 163.93 cum
Mud Mortar
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.3.1 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
11.3.1 40 aggregate)
mm thickfinished
with 20 with
mm a floatingsize
nominal coatstone
of neat cement, including cement slurry,
aggregate
MATERIAL
2202 Carriage of Stone aggregate below 40 mm nom 163.93 cum
982 Coarse sand (zone III) 1500 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
127 Driver (for Road Roller, Concrete Mixer, Truck 784 Day
2 Hire charges of Concrete Mixer 0.25 to 0.40 800 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.4 11.4 52 mm thick cement concrete flooring with concrete hardener topping, under
Code layer 40 mm thick cement concrete 1:2:4 (1Rate
Description cement : 2 coarse
Unitsand : 4 graded
MATERIAL
7254 Hardening compound 36 litre
9977 Carriage of hard crete 2.12 L.S.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.5 11.5 62 mm thick cement concrete flooring with concrete hardener topping, under
Code layer 50 mm thick cement concrete 1:2:4 (1Rate
Description cement : 2 coarse
Unitsand : 4 graded
MATERIAL
9977 Carriage of Hardening compound 2.12 L.S.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.6.1 11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3
11.6.1 18 coarse sand), finished with a floating coat of neat cement.
mm thick
MATERIAL
Cement mortar 1:3 = 0.205 cum+
Add for rounding corners = 0.030 cum
= 0.235 cum.
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.7 11.7 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
Code aggregate 20 mm nominal size), including finishing
Description Rate complete.
Unit
Details of cost for one cum.
MATERIAL
4.1.3 Rate as per item No.4.1.3 of S.H.Concrete Wo 7365.15 cum
Extra labour for laying in floors etc.
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
11.8 11.7A Cement concrete pavement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III)
Code including manufactured sand derived fromRate
Description including RecycledUnitconcrete
MATERIAL
4.1.2A Rate as per Item No.4.1.2A of SH:Concrete W 7555.05 cum
Extra labour for laying in floors etc.
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
11.9 11.8 Extra for making chequers of approved pattern on cement concrete floors, steps
Code landing, pavements etc.
LABOUR
114 Beldar 645 Day
9999 Chequered plate etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.10.1 11.9 40 mm thick marble chips flooring rubbed and polished to granolithic finish,
undershade
11.9.1 Dark layer 34 mm thick
pigment withcement
ordinaryconcrete
cement 1:2:4 (1 cement : 2 coarse sand : 4
MATERIAL
For under layer of 34mm thick
296 Stone Aggregate (Single size) : 12.5 mm nomi 1350 cum
for top layer 6mm thick
785 Marble chips upto 4mm and downsize White 189 quintal
784 Marble dust/ powder 1130 cum
874 Black colour dark shade pigment 70 kilogra
3.5kg/ 50kg of cement
= 40.5x3.5/50=2.84kg
9977 Carriage of pigment & marble powder etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
undershade
11.9.2 Light layer 34 mm thick
pigment withcement concrete 1:2:4 (1 cement : 2 coarse sand : 4
white cement
11.9.1 Rate as per item no 11.9.1 of SH: Flooring 917.5 sqm
Add difference of cost due to using light shade
pigment instead of dark shade pigment
Add for
875 Red, chocolate, orange, buff or yellow (red oxi 60 kilogra
Deduct for
Addd difference of cost due to using white cement instead of grey cem
Add for
368 White Cement 11200 tonne
Deduct for
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
11.9.3 Medium shade pigment with 50% white cement and 50% ordinary cement
Add for
876 Green or blue medium shade pigment 56 kilogra
Deduct for
Add difference of cost due to using white cement instead of grey ceme
Add for
Deduct for
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
under cement
11.9.4 White layer 34without
mm thick cement
any concrete 1:2:4 (1 cement : 2 coarse sand : 4
pigment
MATERIAL
For under layer of 34mm thick
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
undershade
pigment withcement concrete
ordinary cement1:2:4 (1 cement : 2 coarse sand : 4
Add difference of cost due to using light
shade pigment instead of dark shade pigment
Add for
Deduct for
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
cost of 1 sqm
Say
under layer
11.9.6 Ordinary 34 mm
cement thick cement
without concrete 1:2:4 (1 cement : 2 coarse sand : 4
any pigment
Less cost of dark shade pigment
Deduct for
9999 Deduct for carriage of pigment 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
cost of 1 sqm
Say
11.11.1 11.1 40 mm thick marble chips flooring, rubbed and polished to granolithic finish,
undershade
Ordinary cement1:2:4 (1 cement : 2 coarse sand : 4
MATERIAL
For Under layer of 31 mm thick
788 Marble chips large size above 4 mm White & 250 quintal
3.5kg/ 50kg of cement
= 57.80x3.5/50=4.05kg
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
undershade
white cement
Add for
Deduct for
Add for
Deduct for
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
under layer
11.10.3 Medium 31 mm
shade thickwith
pigment cement
50%concrete 1:2:4 and
white cement (1 cement : 2 coarse
50% ordinary sand : 4
cement
Add for
Deduct for
Add for
Deduct for
Total
Add 1 % for water charges on all except (A) i.e. on (9591.48 - 9469) =
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
under cement
mm thick cement
any concrete 1:2:4 (1 cement : 2 coarse sand : 4
pigment
MATERIAL
For Under layer of 31 mm thick
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
undershade
Add difference of cost due to using light
shade pigment instead of dark shade pigment
Add for
Deduct for
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
cost of 1 sqm
Say
under layer
cement thick cement
any pigment
MATERIAL
For under layer 31 mm thick
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
undershade
ordinary cement 1:2:4 (1 cement : 2 coarse sand : 4
MATERIAL
For top layer 12mm thick
@ 3.5kg/50kg of cement
= 81x3.5/50=5.67kg
9977 Carriage of pigment and marble powder etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
undershade
white cement
11.11.1 Rate as per Item Number 11.11.1 of SH:Floor 979.9 sqm
Add difference of cost due to using light shade pigment instead of dar
Deduct
Add Difference of cost due to using white cement instead of grey ceme
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
under layer
11.11.3 Medium 28 mm
shade thickwith
pigment cement
50%concrete 1:2:4 and
white cement (1 cement : 2 coarse
50% ordinary sand : 4
cement
Add difference of cost due to using Medium shade pigment instead of
Add for
Deduct for
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
under cement
mm thick cement
any pigmentconcrete 1:2:4 (1 cement : 2 coarse sand : 4
MATERIAL
For Top layer 12 mm thick
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
undershade
Add difference of cost due to using Light shade pigment instead of da
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
under layer
cement thick cement
any pigment
MATERIAL
For Top layer 12mm thick
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.13.1.1 11.12 Marble chips skirting up to 30 cm height, rubbed and polished to granolithic
11.12.1 18finish,
mm top layer
thick with6 under
mm thick with
layer white,
12 mm black,
thick chocolate,
in cement grey,
plaster 1:3yellow or green
(1 cement :3
coarse
11.12.1.1Dark sand)
shade :
pigment with ordinary cement
MATERIAL
For under layer of 12mm thick Cement mortar 1:3 (1 cement : 3 coarse
Top layer 6mm thick
@ 3.5kg/50kg of cement
=40.5x3.5/50=2.84kg
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
finish,
11.12.1 18 mm top layer
thick with6 under
mm thick with
layer white,
12 mm black,
thick chocolate,
in cement grey,
(1 cement :3
coarse
11.12.1.2Light sand)pigment
shade : with white cement
11.12.1.1Rate as per Item Number 11.12.1.1 of SH:Flo 1563.7 sqm
Add difference of cost due to using light shade pigment instead of dar
Add for
Deduct for
Add for
Deduct for
TOTAL
TOTAL
TOTAL
Add 15 % for contractor's profit and overheads on all except (A) i.e
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
finish,
thick with6 under
mm thick with
layer white,
12 mm black,
thick chocolate,
in cement grey,
(1 cement :3
coarse sand)
11.12.1.3Medium shade: pigment with 50% white cement and 50% ordinary cement
Add difference of cost due to using medium shade pigment instead of
Add for
Deduct for
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.12.1 finish,
18 mm top layer
thick with6 under
mm thick with
layer white,
12 mm black,
thick chocolate,
in cement grey,
(1 cement :3
coarsecement
11.12.1.4White sand) :without any pigment
MATERIAL
For under layer of 12mm thick Cement mortar 1:3 (1 cement : 3 coarse sand) = 0.1
Extra for rounding = 0.03
Total =0.174
Top layer 6mm thick
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
finish,
thick with6 under
mm thick with
layer white,
12 mm black,
thick chocolate,
in cement grey,
(1 cement :3
coarse
11.12.1.5Light sand)pigment
shade : with ordinary cement
Add difference of cost due to using Light shade pigment instead of da
Add for
Deduct for
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.12.1 finish,
18 mm top
thicklayer
with6 under
mm thick with
layer white,
12 mm black,
thick chocolate,
in cement grey,
(1 cement :3
coarse sand)
11.12.1.6Ordinary : without any pigment
cement
Less cost of dark shade pigment
Deduct for
9999 Deduct for Carriage of pigment 2.12 L.S.
2268 Marble dust and/or marble chips 163.93 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.14.1 11.13 Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
11.13.1 40 mm wide and 4 mm thick
Details of cost for 10 metre length
MATERIAL
Glass strips = 10m
Add 10% for wastage = 1m

Total = 11m
1149 Glass strip 4 mm thick40 mm deep 20 metre
9977 Carriage of glass 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 meter
Cost of 1 meter
Say
11.15 11.14 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in
Code width, including cost of forming, nosing etc.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Sqm.
Cost of 1sqm.
Say
11.16.1 11.15 Crazy marble stone flooring, including filling the gaps with light shade pigment
with
11.15.1 18 mmwhite cement
thick crazy marble powder mixture
stone white, (3 parts
black of white cement : 1 part of
or as specified
Under layer 25mm thick of cement Concree 1:2:4 -10x0.025=0.25 cum
11.7 Rate as per Item Number 11.7 of SH:Flooring 7958.65 cum
Cement slurry for subgrade and under large

cement
Labour for applying cement slurry
LABOUR
114 Beldar 645 Day
Top layer with marble pieces and gap filling with marble powder mixtur
Marble pieces for crazy flooring
(Assume 70% of marble stone are and 30% of joint filer/mixture
7sqmx0.02m = 0.14 cum
0.872x0.14/0.051 = 2.40q
2710 White marble makranasecondquality plain veine 160 quintal
@ 3.5kg/50kg of cement =
40.5x3.5/50=2.84kg
9977 Carriage of pigment & marble powder 2.12 L.S.
Labour for finishing, polishing and fixing-
114 Beldar 645 Day
115 Coolie 645 Day
9999 Sundries including carborandum etc. 2.12 L.S.
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Sqm.
Cost of 1sqm.
Say
11.17.1 11.16 Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm,
laid inshade
11.16.1 Light floors,pigment
and landings, jointed
using white with neat cement slurry mixed with pigment
cement
MATERIAL
1201 Precast terrazo tiles 22 mm thick (light shade) 285 sqm
including 10% wastage
Grey cement for slurry @ 4.4kg/sqm.
for grouting
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Sundries including carborandum stone etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
laid in floors,
11.16.2 Medium shadeand landings,
pigment jointed
using with neat
50% white cement
cement and slurry mixed with
50% ordinary pigment
cement
MATERIAL
1202 Precast terrazo tiles 22 mm thick(medium sha 265 sqm
Grey cement
(i) for slurry @ 4.4kg/sqm =44 kg.+
(ii) 50% for grouting = 22kg.
Total =66kg or 0.066 tonne
50% white cement for grouting
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
laid inshade
11.16.3 Dark floors, and landings,
pigment jointed with
using ordinary neat cement slurry mixed with pigment
cement
MATERIAL
1203 Precast terrazo tiles 22 mm thick (dark shade) 245 sqm
Ordinary cement for

(i) Cement slurry @ 4.4kg/sqm = 44kg+
(ii) Grouting = 44 kg.
Total = 88kg or 0.088 tonne
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
laid in floors,
11.16.4 Ordinary andwithout
cement landings,
anyjointed with neat cement slurry mixed with pigment
pigment
MATERIAL
Ordinary cement for

LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.18 11.17 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width.
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.19.1 11.18 Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm,
in skirting
11.18.1 Light shade and risers using
pigment of steps not cement
white exceeding 30 cm in height, on 12 mm thick
MATERIAL
1201 Precast terrazo tiles 22 mm thick (light shade) 285 sqm
For slurry
For buttering tiles bed sides =44 kg. +
For grouting =22 kg.
Total = 66 kg
66x3.5/50 = 4.62
LABOUR
115 Coolie 645 Day
9999 Sundries including carborandum stone and pol 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
in skirting
11.18.2 Medium and risers
shades of steps
pigment usingnot
50% exceeding 30 cmand
white cement in height, on 12 mm
50% ordinary thick
cement
MATERIAL
1202 Precast terrazo tiles 22 mm thick(medium sha 265 sqm
including wastage & breakage
50% white cement for slurry
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
in skirting
11.18.3 Dark shadeand risersusing
pigment of steps not exceeding
ordinary cement 30 cm in height, on 12 mm thick
MATERIAL
Grey cement for slurry
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
in skirtingcement
11.18.4 Ordinary and risers of steps
without not exceeding 30 cm in height, on 12 mm thick
any pigment
MATERIAL
Grey cement for sturry
LABOUR
115 Coolie 645 Day
Less for dark shade pigment [4.62+2.84(for

tiles)]
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.20.1 11.19 Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm
in floors,
11.19.1 Light jointed
shade withusing
pigment neat cement slurry mixed with pigment to match the shade
white cement
MATERIAL
1227 Chequered terrazo tiles 22 mm thick(light sha 275 sqm
Grey cement for slurry @ 4.4kg/sqm
White cement for grouting
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
in floors,shade
11.19.2 Medium jointed with neat
pigment cement
using 50% slurry mixed with
white cement, 50% pigment tocement
ordinary match the shade
MATERIAL
1228 Chequered terrazo tiles 22 mm thick(medium 300 sqm
Grey cement
(i) for slurry @ 4.4kg/sqm =44 kg.+
(ii) 50% for grouting = 22kg.
Total =66kg or 0.066 tonne
50% white cement for grouting
Labour and sundries
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
in floors,
11.19.3 Dark shadejointed withusing
pigment neat cement
ordinaryslurry
cementmixed with pigment to match the shade
MATERIAL
1229 Chequered terrazo tiles 22 mm thick (dark sh 260 sqm
Ordinary cement for

Labour & sundries
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
in floors, cement
11.19.4 Ordinary jointed with neatany
without cement slurry mixed with pigment to match the shade
pigment
MATERIAL
1229 Chequered terrazo tiles 22 mm thick (dark sh 260 sqm
Ordinary cement for

Labour & sundries
115 Coolie 645 Day
101 Bhisti 714 Day

tiles)]
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.21.1 11.2 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard,
jointed
11.20.1 Light with neat
shade cement
pigment slurry
using whitemixed with pigment to match the shade of tiles,
cement
MATERIAL
7070 Chequered precast cement concrete tiles 22mm 370 sqm
Grey cement slury @ 4.4kg @sqm
White cement for grouting
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
jointed with
11.20.2 Medium neat
shade cementusing
pigment slurry50%
mixed with
white pigment
cement 50%toGrey
match the shade of tiles,
cement
MATERIAL
7237 Precast chequered cement tiles 22 mm thick 335 sqm
Grey cement for slurry @ 4.4kg/sqm. = 44

kg.+
grey cement for grouting 2.4kg/sqm. = 24kg.
Total = 68 kg
White cement for grouting @ 2.4kg/sqm. =
24 kg
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
jointed
11.20.3 Dark with pigment
shade neat cement slurry
using mixed
ordinary with pigment to match the shade of tiles,
cement
MATERIAL
Grey cement for slurry @ 4.4kg/sqm. = 44

kg.+
For grouting = 48 kg.
Total=92 kg. say 0.092 tonne
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
jointed with
11.20.4 Ordinary neat cement
cement without slurry mixed with pigment to match the shade of tiles,
any pigment
MATERIAL
Grey cement for slurry @ 4.4kg/sqm. = 44 kg

+
For grouting = 48 kg.
Total = 92 kg. Say 0.092 tonne
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day

tiles)]
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.22.1.1 11.21 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
11.21.1 make and colour
In flooring on a bed using acid
of 10 mmand/or
thick alkali
mortarresisting mortar
1:4 (1 acid bedding,
proof cement and joints
: 4 coarse
sand)and alkali resistant tile
11.21.1.1Acid
MATERIAL
Acid proof tiles of size 300x300mm, 10mm thick = 11.11nos+
Add wastage and breakage @ 2.5% = 0.28 nos.
Total = 11.39 nos. Say 12 nos.
7077 Acid and alkali resistant tiles 300x300 mm siz 500 10 Nos
9999 Mortar for pointing in acid/alkali resistant cem 2.12 L.S.
Cement for slurry over bed @ 3.3kg per sqm
Difference of cost for using acid proof cement instead of ordinary ceme
Add
7024 Acid Proof cement 7800 tonne
Deduct
LABOUR
115 Coolie 645 Day
9988 Sundries including carriage of cement etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
11.22.2.1 11.21 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make
11.21.2 In and colouron
dado/skirting using acid
12 mm and/or
thick alkali
mortar 1:4resisting mortarcement
(1 acid proof bedding,
: 4 and joints
coarse sand)
11.21.2.1Acid and alkali resistant tile
MATERIAL
Acid proof tiles of size 300x300mm, 10mm thick = 11.11nos+
Add wastage and breakage @ 2.5% = 0.28 nos.
Total = 11.39 nos. Say 12 nos.
7077 Acid and alkali resistant tiles 300x300 mm siz 500 10 Nos
Difference of cost for using acid proof cement instead of ordinary ceme
Add
Deduct
9999 Mortar for pointing in acid proof cement 2.12 L.S.
Acid proof cementfor slurry over plaster

3.3kg/sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
11.23.1.1 11.22 Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick
bed of cement
11.22.1 Marble mortar 1:3
tiles (polished) Raj(1Nagar
cement :3 coarse sand) and jointed with grey cemen
11.22.1.18 mm thick
MATERIAL
2751 8 mm thick marble tiles (polished) Raj Nagar 400 sqm
including wastage
12mm thick Cement mortar 1:3 (1 cement : 3 coarse sand)
Cement for slurry @ 3.3kg/sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
11.24.1 11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble
approvedwhite
11.23.1 Makrana by Engineer-in-charge,
second quality over 20 mm (average) thick base of cement
MATERIAL
20mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
6001 White marble slab Makrana second quality pla 1450 sqm
Base Cement mortar 1 : 4 (1 cement : 4 coarse sand)
Cement for slurry @4.4kg/sqm.

(i) for bedding = 44 kg+
(ii) for jointing = 6 kg.
Total = 50 kg
9977 Carriage of marble slab 2.12 L.S.
LABOUR
(for finishing, polishing and fixing)
114 Beldar 645 Day
115 Coolie 645 Day
9988 Sundries and carriage of cement etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
approved
11.23.2 Raj Nagar by Engineer-in-charge, over 20 mm (average) thick base of cement
plain
MATERIAL
Total = 11.50sqm.
7071 White marble Raj Nagar plain 18 mm thick up 550 sqm
Cement for slurry @, 4.4kg sqm.

Total = 50 kg
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
approved
11.23.3 Agaria by Engineer-in-charge, over 20 mm (average) thick base of cement
White
MATERIAL
Total = 11.50sqm.
7850 Agaria White marble slab plain 18mm thick 950 sqm

Total = 50 kg
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
approved
11.23.4 Black Zebraby Engineer-in-charge, over 20 mm (average) thick base of cement
MATERIAL
Total = 11.50sqm.
6019 Black Zebra marble slab plain 18mm thick 1000 sqm

Total = 50 kg
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
approvedgreen
11.23.5 Udaipur by Engineer-in-charge,
marble over 20 mm (average) thick base of cement
MATERIAL
Total = 11.50sqm.
6010 Udaypur green marble slab plain 18mm thick 620 sqm

Total = 50 kg
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
approved
11.23.6 Pink plain by Engineer-in-charge, over 20 mm (average) thick base of cement
marble
MATERIAL
Total = 11.50sqm.
6007 Pink marble slab plain 18mm thick 685 sqm

Total = 50 kg
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.25 11.24 Extra for pre finished nosing to treads of steps of marble stone.
Details of cost for 10m
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10m
Cost for 1m
Say
11.26 11.25 Extra for marble stone flooring in treads of steps and risers using single length
Code up to 2.00 metre.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.27.1 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed
11.26.1 25with
mmgrey cement slurry mixed with pigment to match the shade of the slab,
thick
MATERIAL
1168 Kota stone slab 20 mm to 25 mm thick (semi-p 320 sqm
Cement for slurry-

(i) for bedding = 44kg+
(ii) for joints = 20 kg.
Total = 64 kg. or 0.064 tonne
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.28 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on
Code 12 mm (average) thick cement mortar 1:3 (1Rate
Description cement: 3 coarse
Unitsand) and jointed
MATERIAL
1168 Kota stone slab 20 mm to 25 mm thick (semi-p 320 sqm
for slurry
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.29.1 11.28 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of
cement
11.28.1 Red sand mortar
stone1:5 (1 cement : 5 coarse sand) with joints finished flush.
MATERIAL
Finished work = 10 sqm
Add for wastage @ 10% = 1 sqm
Total = 11 sqm
(i) for beading = 0.224 cum+
(ii) for joining = 0.026 cum.
Total=0.250cum.
3.1 Rate as per Item Number 3.10 of SH: Mortars 3995 cum
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
cement
11.28.2 White mortar
sand 1:5 (1 cement : 5 coarse sand) with joints finished flush.
stone
MATERIAL
Total = 11 sqm
Total=0.250cum.
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
cement
11.29.1 Red sand mortar
stone1:5 (1 cement : 5 coarse sand), including pointing with cement
MATERIAL
Total = 11 sqm
Total=0.250cum.
Cement mortar 1:2 (1 Cement : 2 stone dust for pointing)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
cement
11.29.2 White mortar
sand 1:5 (1 cement : 5 coarse sand), including pointing with cement
stone
MATERIAL
Total = 11 sqm
Total=0.250cum.
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.31.1 11.3 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement
mortar
11.30.1 Red sand1:5stone
(1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with
MATERIAL
Total = 11 sqm
Total=0.250cum.
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
Labour for rubbing of stone
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.31.2 11.3 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement
mortarsand
11.30.2 White 1:5 (1stone
cement : 5 coarse sand) with joints 3 mm thick, side buttered with
MATERIAL
Total = 11 sqm
Total=0.250cum.
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
Labour for rubbing of stone
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.32 11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.33 11.32 Extra for Kota stone/ sand stone in treads of steps and risers using single length
up to 1.05 metre.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm.
Cost for 1sqm.
Say
11.34.1 11.33 25 mm wooden planking, tongued and grooved in flooring, including fixing with
iron screws
11.33.1 Second complete
class teak woodwith :
Details of cost for 2.5x4=10 sqm.
MATERIAL
Second class indian teak wood
No of joints = 4000/138 = 28.97
Total = (29-1) = 28 nos
Qty of wood required
2.5(4+0.336)x0.025 = 0.271 cum
Add wastage @ 10 % = 0.027 cum
Total = 0.2981 cum = 298.1 cudm
(slotted counters sunk head type)
LABOUR
114 Beldar 645 Day
9999 Sundries for glue etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1sqm.
Say
11.34.2 11.33 25 mm wooden planking, tongued and grooved in flooring, including fixing with
iron screws
11.33.2 Second complete
class with :
deodar wood
Details of cost for 2.5x4=10 sqm.
MATERIAL
First class deodar wood planks
No of joints = 4000/138 = 28.97
Total = (29-1) = 28 nos
Qty of wood required
2.5(4+0.336)x0.025 = 0.271 cum
Add wastage @ 10 % = 0.027 cum
Total = 0.2981 cum = 298.1 cudm
1194 Second class deodar wood in planks 500 10 cudm
2500 Extra for selected planks of second class de 113 10 cudm
(slotted counters sunk head type)
LABOUR
114 Beldar 645 Day
9999 Sundries for glue etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1sqm.
Say
11.35 11.34 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick
Code leveling layer of cement concrete 1:2:4 (1 cement
Description Rate : 2 coarseUnit
sand : 4 graded
Bitumen blown type
i) For bed layer @ 2.45kg/sqm. = 2.45kg+
ii) For dipping blocks L.S. = 2.00Kg.
Total = 4.45kg.
313 Blown type petroleum bitumen of penetration 8 34790 tonne
1st class teal wood in scanting for wooden blocks
1 sqm x 0.038 m = 0.038 cum
Add 10 % wastage = 0.0038 cum
Total = 0.0418 cum or 41.8 cudm
1187 First class teak wood in scantling 880 10 cudm
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
130 Mistry 784 Day
9999 Sundries such as fuel, kerosene oil, sand pape 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm.
Say
11.36 11.35 Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S.
Code flat 10x5 mm, 10 cm long, forked at end 60cm
Description apart (minimum
Rate Unitthree lugs to be
Details of cost for 3m (11.40+0.24kg = 11.64kg)
MATERIAL
Angle iron 50x50x5 mm =3 m
Add wastage @ 5% = 0.15 m
Total =3.15 m @ 3.80 kg per m = 11.97 kg Say 0.12 qtl
Lugs 10x5 mm flat = 6x0.10 = 0.60 m@ 0.40 kg per m = 0.24 kg
Total 0.252 kg or 0.0025 qtl
6cm (lugs)
LABOUR
114 Beldar 645 Day
Priming coat 3x0.20 = 0.60 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 11.64 kg.
Cost per 1 Kg.
Say
11.37 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to
Code be specified by the manufacturer) of 1st quality
Description Rate conformingUnit
to IS : 15622 of
MATERIAL
Glazed Ceramic floor tiles 300x300 mm size = 1.000 sqm
Total = 1.025 sqm
7801 Ceramic Glazed Tiles Ist quality 300 x 300mm 175 sqm
20 mm thick Cement mortar 1 : 4 (1 cement : 4 coarse sand)

sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.38 11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :
Code 15622 (thickness to be specified by the manufacturer
Description Rate ) of approved
Unit make in all
MATERIAL
7801 Ceramic Glazed Tiles 1st quality 300 x 300 mm 175 sqm
1.00 sqm + 0.025 sqm (Add for wastage and breakage @2.5%) = 1.02
9977 Carriage of Tiles 2.12 L.S.
Cement mortar 1:3 (1 Cement: 3 Coarse Sand)
Cement for slurry over bed @3.3 Kg/Sqm
LABOUR
115 Coolie 645 day
9988 Carriage of cement and sundries 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm
Say
11.39 11.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to
Code be specified by the manufacturer), of 1st quality
Description Rate conformingUnit
to IS : 15622, of
MATERIAL
Glazed Ceramic floor tiles 300x300 mm size = 1.000 sqm
Total = 1.025 sqm
7802 Ceramic Glazed Tiles Ist quality 300 x 300 in 300 sqm

sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.4 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or
Code more (thickness to be specified by the manufacturer),
Description Rate of 1stUnit
quality conforming
MATERIAL
Rectified Ceramic Glazed floor tiles 300x300 mm size = 1.000 sqm
Total = 1.025 sqm
7803 Rectified Ceramic Glazed Tiles Ist quality 3 340 sqm

sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.41 11.4 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or
more (thickness to be specified by the manufacturer), of 1st quality conforming
MATERIAL
Rectified Ceramic Glazed floor tiles 300x300 mm size or more = 1.00
Total = 1.025 sqm
7804 Rectified Ceramic Glazed Tiles Ist quality 3 400 sqm

sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.42.1 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be
specified
11.41.1 Size by500x500
of Tile the manufacturer)
mm with water absorption less than 0.08% and
MATERIAL
Vitrified floor tiles 50x50 cm size = 1.000 sqm
Total = 1.025 sqm
8620 Vitrified floor tile 50x50 cm conforming to IS 500 sqm
sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
specified
11.41.2 Size by600x600
MATERIAL
Total = 1.025 sqm

sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
specified
11.41.3 Size by800x800
MATERIAL
Total = 1.025 sqm

sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
specified
11.41.4 Size by1000x1000
MATERIAL
Total = 1.025 sqm
8623 Vitrified floor tile 100x100 cm conforming to 1390 sqm

sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.43.1.1 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be
specified
11.41A.1 Double by the
charge manufacturer)
vitrified withfinish
tile polished waterofabsorption
size less than 0.08% and
11.41A.1.Size of Tile 600 x 600 mm
MATERIAL
Double Charged vitrified floor tile of size 60 x 60 cm size = 1.00 s
9500 Double Charged vitrified tile polished finish of 460 sqm
Cement for slurry over bed @3.3 kg per sqm
9999 For notch trowel, piler, wedge, clips of requir 2.12 L.S.
LABOUR
115 Coolie 645 day
9988 Sundries including carriage of quick set ploym 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
MATERIAL
Double Charged vitrified floor tile of size 80 x 80 cm size = 1.00 s
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
tile polished waterof
absorption
MATERIAL
Double Charged vitrified floor tile of size 60 x 120 cm size = 1.00
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
MATERIAL
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
tile polished waterof
absorption
11.41A.1.Size of Tile 1000 x 1000 mm
MATERIAL
9504 Double Charged vitrified tile polished finish o 700 sqm
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
11.41A.2 Glazed by thefloor
vitrified manufacturer) with
tiles polished water
finish of absorption
MATERIAL
Glazed vitrified floor tile of size 60 x 60 cm size = 1.00 sqm + Add
9505 Glazed vitrified tiles polished finish of size 60 500 sqm
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
MATERIAL
Glazed vitrified floor tile of size 60 x 120 cm size = 1.00 sqm + Ad
9506 Glazed vitrified tiles polished finish of size 60 700 sqm
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
MATERIAL
Glazed vitrified floor tile of size 80 x 80 cm size = 1.00 sqm + Add
9507 Glazed vitrified tile polished finish of size 80 650 sqm
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
MATERIAL
Glazed vitrified floor tile of size 80 x 120 cm size = 1.00 sqm + Ad
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
11.41A.2.Size of Tile 1200 x 1200 mm
MATERIAL
Glazed vitrified floor tile of size 120 x 120 cm size = 1.00 sqm + A
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
11.41A.3 Glazed by thetiles
Vitrified manufacturer)
Matt/Antiskid with water
finish absorption less than 0.08% and
of size
MATERIAL
Glazed vitrified tiles Matt/ Antiskid finish of size 60 x 60 cm size
9510 Glazed vitrified tiles Matt/ Antiskid finish of s 480 sqm
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
Vitrified manufacturer) with
Matt/Antiskid water
of size
MATERIAL
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
of size
MATERIAL
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
of size
MATERIAL
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
specified
Vitrified manufacturer) with
Matt/Antiskid water
of size
11.41A.3.Size of Tile 1200 x 1200 mm
MATERIAL
Glazed vitrified tiles Matt/ Antiskid finish of size 120 x 120 cm siz
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm.
Say
11.44 11.42 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand)
Code bedding in laying of floor tiles and jointing Rate
Description with grey cementUnit
slurry @ 3.3 kg/
MATERIAL

sqm
LABOUR
115 Coolie 645 Day
9988 Sundries i/c carriage of cement etc. 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.45 11.43 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer
Code modified quick-set tile adhesive (Water based)
Description Rateconforming to IS: 15477, in
Unit
MATERIAL
8731 High polymer modified quickset tile adhesive 9 per kg
LABOUR
115 Coolie 645 Day
9988 Sundries i/c carriage of cement etc. 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.46 11.44 Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1
Code cement: 4 coarse sand), with joints not exceeding
Description Rate 5 mm, including
Unit filling the
MATERIAL
Under layer 12 mm thick Cement mortar 1:4 (1 cement : 4 coarse sand)
3.9 Rate as per Item No.3.9 of SH:Mortar 4355.2 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Cement slurry for subgrade
Labour for applying cement slurry
114 Beldar 645 Day
Top layer with tile piece and gap filling with
cement motar:
Ceramic tile piece for crazy flooring
assuming 70% tile area and 30% of joint
filler/mixture. (7.00x0.010)=0.07
0.872x0.07/0.051=1.20 qtl
2709 Ceremic Tiles Pieces for Crazy Flooring 145 quintal
Cement motar 1:4 for filling of crazy tile :(300x0.01=0.03)
Synthetic polyster triangular
4.18 Rate as per Item No.4.18 of SH:CONCRET 61.85 per bag
Water proofing compound
4.12 Rate as per Item No.4.12 of SH:CONCRET 57.15 per 50
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.47 11.45 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm
Code thick sub grade of compacted bed of 20 mm
Description thick nominal size
Rate Unit stone aggregate
MATERIAL
1 x 10 x 0.15 = 1.5cum
2202 Stone aggregate below 40 mm nominal size 163.93 cum
LABOUR
for spreading ramming and consolidation
of sub grade
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Providing and filling Jamuna sand
2.27 Rate as per Item No.2.27 of SH:EARTH WO 2161.2 cum
2708 Truf Paver (500 x 500 x 40 mm) 510 sqm
Labour for laying of Turf pave
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.48.1 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer),
11.46.1 Size with water
of Tile 500x500 mm absorption less than 0.08 % and conforming to I.S.
MATERIAL
Vitrified floor tiles 50 x 50 cm size = 1.00
sqm+
Add wastage & breakage @ 2.5% = 0.025
sqm
Total = 1.025 sqm
3.8 Rate as per Item No.3.8 of SH:Mortars 5024.15 cum
Cement slurry over bed @ 3.3 kg per sqm
LABOUR
115 Coolie 645 Day
9988 Sundries including carriage of quick set polym 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
manufacturer),
of Tile 600x600 mm absorption less than 0.08 % and conforming to I.S.
MATERIAL
sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
manufacturer), with water absorption less than 0.08 % and conforming to I.S.
11.46.3 Size of Tile 800x800 mm
MATERIAL
sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
manufacturer),
of Tile 1000x1000 mmabsorption less than 0.08 % and conforming to I.S.
MATERIAL

sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.49 11.46A Providing and fixing glazed screen printed border tile 75mm wide having
Code thickness 5mm, of approved quality & make,
Description in all shades, Unit
Rate design and prints, in
Details for 1 sqm = 75mm wide 13.33 metre
MATERIAL
8624 Border tiles 200x75mm size 16 each
5mm thick Tile required

=1.00/(0.20x0.075)=66.70 tile.
Add 2.5% wastage = 1.67 tile
Total 68.37 say 68 tiles
12 mm base Cement mortar 1 : 3 (1 cement : 3 coarse sand)
LABOUR
115 Coolie 645 Day
9999 Sundries (26.91-0.16=26.75) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm i.e. 13.33 metre
Cost per metre
Say
the manufacturer),
11.47.1 Size of Tile 500x500withmmwater absorption less than 0.08% and conforming to IS:
MATERIAL
sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
the manufacturer),
MATERIAL
sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
the manufacturer),
MATERIAL
sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
the manufacturer),
11.47.4 Size of Tile 1000x1000withmm
water absorption less than 0.08% and conforming to IS:
MATERIAL

sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.51.1 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy
groutofmix
11.48.1 Size Tileof500x500
0.70 kg mm
of organic coated filler of desired shade (0.10 kg of hardener
MATERIAL
8682 Epoxy Grout 380 Kg
LABOUR
115 Coolie 645 Day
9988 Sundries including carriage 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
groutofmix
0.70 kg mm
MATERIAL
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
groutofmix
0.70 kg mm
MATERIAL
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
groutofmix
11.48.4 Size Tileof1000x1000
0.70 kg of mm
organic coated filler of desired shade (0.10 kg of hardener
MATERIAL
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.52.1 11.49 Providing and laying Vitrified tiles in floor with different sizes (thickness to be
specified
11.49.1 Size by500x500
of Tile the manufacturer),
MATERIAL
sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
specified
11.49.2 Size by600x600
MATERIAL
sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
specified
11.49.3 Size by800x800
MATERIAL
sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
specified
11.49.4 Size by1000x1000
MATERIAL

sqm+
sqm
Total = 1.025 sqm
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.53 11.5 Deduct for not grouting the joints with white cement and matching pigment in the
Code items of fixing of vitrified tiles.
MATERIAL
9999 Mortar for pointing in white cement with matc 2.12 L.S.
9999 LABOUR 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
11.54.1 11.51 Providing and laying machine cut, mirror polished, Italian Marble stone flooring
laidmm
11.51.1 18 in required pattern
thick Italian in linear
Marble stoneportion of the building
slab, Perlato, all complete
Rosso verona, as per
Fire Red or Dark
Code Emperadore
Description etc. Rate Unit
Details of cost per 10 sqm

MATERIAL
18 mm thick italian marble stone
slab 10.00 sqm
Add for wastage 15%= 1..50 sqm
Total: 11.50 sqm
1240 18 mm thick Italian Marble stone slab, Base 3209 sqm
Rate as per Item No.3.9 of SH:M O R T A R

S
Cemnt for slurry@, 4.4 kg/sqm
(i) for bedding=44 kg+
(ii) for jointing= 6 kg
3.9 Total=50 kg 4355.2 cum
9999 carriage of marble slab 2.12 L.S.
LABOUR :
(for finishing , polishing and fixing)
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Cum.
Cost of 1 Cum.
Say
11.55.1 11.52 Providing and laying machine cut, mirror polished Marble stone flooring, in
required
11.52.1 18 design
mm thick (Simple
Italian geometrical,
Marble stone slab,abstract
Perlato, etc.)
Rosso and in patterns
verona, in or Dark
Fire Red
Code Emperadore etc.

MATERIAL
18 mm thick italian marble stone
slab 10.00 sqm
Add for wastage 20%= 2 sqm
Total: 12 sqm
1240 18 mm thick Italian Marble stone slab, Base 3209 sqm
Rate as per Item No.3.9 of SH:M O R T A R

S
Cemnt for slurry@, 4.4 kg/sqm
(i) for bedding=44 kg+
(ii) for jointing= 6 kg
3.9 Total=50 kg 4355.2 cum
LABOUR :
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Cum.
Cost of 1 Cum.
Say
11.56 11.53 Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20
Code mm x 20 mm x 4 mm in all colour, design , Rate
Description fixing in customize
Unitdesign as per

MATERIAL
Glass mossaic tiles (20 mm x 20 mm x 4mm)
Add for wastage 2.5%= 0.2 sqm
Total: 8.20 sqm
1242 Glass mossaic tiles (20 mm x 20 mm x 4 mm ) 2049 sqm
1243 Tile fixing chemical adhesive 8.7 kg
1244 Cement Polymer Grout Compound 13 kg
1245 Acid for cleaning tiles 18 litre
LABOUR :
115 Coolie 645 Day
9999 Sundries including carriage of adhesive etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 8.00 sqm
Cost for 1.00 sqm
Say
11.57.1 11.54 Providing and fixing removable raised/false access flooring with system and its
components
11.54.1 300 of approved
mm Finished make(FFH)
Floor Height for different plenum height with possible height
Details of Cost for : 100.00 Sqm
MATERIALS :
2711 FS800H Grade Flooring Panel (i/c) 5% wasta 740 each
2712 Zinc Electroplated Pedestals - 300 mm 145 each
2714 Zinc Electroplated Tube Stinger 70 each
2715 Machine Screw for Fixing 3 each
7048 Rawl Plug fl0or pedestal grouting on floor 22 each
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm
Say
11.57.2 11.54 Providing and fixing removable raised/false access flooring with system and its
components
11.54.2 450 of approved
mm Finished make(FFH).
Floor Height for different plenum height with possible height
Details of Cost for : 100.00 Sqm
MATERIALS :
2711 FS800H Grade Flooring Panel 740 each
2713 Zinc Electroplated Pedestals - 450 mm 210 each
2714 Zinc Electroplated Tube Stinger 70 each
2715 Machine Screw for Fixing 3 each
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm
Say
11.58.1 11.55 Providing and laying flamed finish Granite stone flooring in required design and
patterns,finish
11.55.1 Flamed in linear as well
granite asslab
stone curvilinear portions
Jet Black, ofRed,
Cherry the building all complete
Elite Brown, Cat Eye as
or
Code equivalent.

Finished work= 0.5 sqm
Total 0.60 sqm
1239 18 mm thick Flamed finish granite stone slab 1000 sqm
LABOUR :
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
11.59.1 11.56 Providing and laying Polished Granite stone flooring in required design and
patterns, Granite
11.56.1 Polished in linearstone
as well as jet
slab curvilinear portions
Black, Cherry ofElite
Red, the building all complete
Brown, Cat Eye or as
Code equivalent.
MATERIAL
18 mm thick polished finish granite stone

slab 10.00 sqm
10.00 + 1.50 (Add for wastage 15%)= 11.50
sqm
LABOUR :
114 Beldar 645 Day
115 Coolie 645 Day
19 Hand Grinder for mirror polish 250 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
12.1.1 12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed
with mm
12.1.1 1.00 polymer
thickcoated J orcoating
with zinc L hooks,
notbolts
less and
thannuts
275 8gm/m²
mm diameter with bitumen
Details of cost for a roof with each sloping side .x5.10m and slop being f
Area of roof = 2x18.09x5.10 = 184.518 sqm.
MATERIAL
C.G.S. sheets 2x27 =54 nos. of size 2.5x0.9 metre @19.35 Kg each =
2x27=54 nos. of size
2.8x0.9@21.67kg. each =1170.18Kg.+
Total = 2215.08Kg.+
Add 5% Wastage = 110.75Kg.
Total = 2325.83 Kg = 23.26 quintals
3050 Galvanised steel corrugated sheets 6000 quintal
G.I.Seam bolts and nuts 60cm
centre to centre zig-zag i.e. 30cm
centre to centre straight
Breadth is 5.1metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)x17 nos. = 884 nos.
G.I.,J or L hooks 8mm dia.
(No. of purlins to be used 5 on either side)2x5x27
(No. of sheets)x23 nos. of bolts
in each sheet = 810 nos.
1023 Galvanised steel J or L hooks 8 mm dia 120 10 Nos
1207 G.I. Limpet washer 21 100 Nos
(total of seam and J bolts)
884+810=1694
1208 Bitumen washer 30 100 Nos
9977 Carriage of bolts and washers 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
4202 Red oxide Zinc chromate primer 120 litre
131 Painter 714 Day
115 Coolie 645 Day
9999 Brushes, sand papers i/c sundries 2.12 L.S.
845 Roofing paint for iron sheets in red colour 120 litre
9977 Carriage of paint 2.12 L.S.
131 Painter 714 Day
115 Coolie 645 Day
9999 Brushes and Sandpapers 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 184.518 Sqm.
Cost of 1 Sqm.
Say
with mm
12.1.2 0.80 polymer
with zinc L hooks,
notbolts
less and
thannuts
275 8gm/m²
mm diameter with bitumen
Details of length and breadth.
Length
26(laps)x0.135(each lap)=3.51
Width of Corrugator sheet with 10 corrugation measured end to end = 0
(width of sheet) = 21.60 length
Less laps = 3.51
Length = 18.09
Breadth on one side-
C.G.S. Sheet 1 No. of = 2.5 metres length+
C.G.S. Sheet 1 No. of = 2.8 metres length
Total = 5.3 metres
Deduct end lap of 20cm (-)0.2 metres
breadth = 5.1m
MATERIAL
C.G.I.Sheets 0.8mm thick
2x27=54nos. @15.82Kg.each
Total = 854.38Kg(X)
2.5mx0.9m is the size of plain G.I.sheet which on being corrugated w
(The size of plain sheet is taken because the weight is available only of
(Refer I.S. Code 277-1962)
2x27=54nos. of size.
2.8x0.9@17.72Kg each' = 956.8Kg (Y)
Total of (X)+(Y) = 1811.16Kg.
Add wastage @5% = 90.56Kg.
Total = 1901.72Kg = 19.02q
G.I. scam bolts and nuts 60cm
centre to centre zig zag i.e. 30cm.
Breadth is 5.1metre
(No. of purlins to be used 5 on either

side)2x5x27 (No. of sheets)x23 Nos. of bolts
in each sheet = 810 Nos

884+810=1694
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
131 Painter 714 Day
115 Coolie 645 Day
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Sqm.
Say
with mm
12.1.3 0.63 polymer
with zinc L hooks,
notbolts
less and
thannuts
275 8gm/
mmm²diameter with bitumen
Details of length and breadth.
Length = 26(laps)x0.135(each lap)=3.51
Width of Corrugator sheet with 10 corrugation measured end to end = 0
(width of sheet) = 21.60 length
Less laps = 3.51
Length = 18.09
Breadth on one side-
C.G.S. Sheet 1 No. of = 2.5 metres length+
C.G.S. Sheet 1 No. of = 2.8 metres length
= 5.3 metres
Deduct end lap of 20cm (-)0.2 metres
breadth = 5.1m
MATERIAL
C.G.I.Sheets 0.8mm thick
2x27=54nos. @12.82Kg.each
= 692.28 Kg(X)
2.5mx0.9m is the size of plain G.I.sheet which on being corrugated w
(The size of plain sheet is taken because the weight is available only of
(Refer I.S. Code 277-1962)
2x27=54nos. of size.
2.8x0.9@13.38Kg each' = 775.44Kg (Y)
Total of (X)+(Y) = 1467.72Kg.
Add wastage @5% = 73.39Kg.
Total = 1541.11Kg = 15.41q
G.I. scam bolts and nuts 60cm
centre to centre zig zag i.e. 30cm.
Breadth is 5.1metre
(No. of purlins to be used 5 on either

side)2x5x27 (No. of sheets)x23 Nos. of bolts
in each sheet = 810 Nos
884+810= 1694
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
131 Painter 714 Day
115 Coolie 645 Day
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Sqm.
Say
12.2.1 12.2 Extra for straight cutting in C.G.S. sheet roofing for making opening of area
exceeding
12.2.1 1.00 40 sq. decimeter for chimney stacks, sky light etc.:
mm thick
Details of cost for 3 metres periphery
Assuming a hole of 10dmx5dm area of the hole 50dm2 and the perimete
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.00 metres
Cost of 1.00 metre
Say
exceeding
mm thick
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.00 metres
Cost of 1.00 metre
Say
exceeding
mm thick
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.00 metres
Cost of 1.00 metre
Say
12.3.1 12.3 Extra for circular cutting in C.G.S. sheet roofing for making opening of area
exceeding
12.3.1 1.00 40 sq. decimeter:
mm thick
Details of cost for 10 holes of 0.5 metre dia-metre
Perimetre of 10 nos 10x22/7x0.5 = 15.71 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15.71 metres
Cost of 1.00 metre
Say
exceeding
12.3.2 0.80 40 sq. decimeter:
mm thick
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
exceeding
12.3.3 0.63 mm thick40 sq. decimeter:
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.4.1 12.4 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with
polymer
12.4.1 0.80 mm coated J orzinc
thick with L hooks, bolts
coating not and
lessnuts
than8275
mmgm/m²
dia G.I. limpet and bitumen
Details of cost for 10.35 metres long ridge
0.80mm thick with zinc coating not less than

275gm/m2
Consider the length of the ridge 10.35
metres.
The ridge will be made out of plain G.I. Sheets
0.9mx1.8m
Three pieces will be 0.9m long and
0.60m wide overlapping 22.5cm.
MATERIAL
G.I. plain sheets 0.80 thick
1.80x0.90m size 5 nos. @
11.39Kg. sheet = 56.95Kg +
Add 2% wastage = 1.14 Kg.
Total = 58.09 Kg. or 0.58 q.
992 Galvanised steel plain sheets 5000 quintal
222 Seam bolts and nuts 6 mm dia and 25 mm lon 10 10 Nos
25mmx6mm (There are 14 joints)
9977 Carriage of seam bolts and washers 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.4.2 12.4 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with
polymer
12.4.2 0.63 mm coated J orzinc
thick with L hooks, bolts
coating not and
lessnuts
than8275
mmgm/m²
dia G.I. limpet and bitumen
Details of cost for 10.35 metre long ridge.
G.I.plain sheets 0.63mm thick
1.8x0.9m size 5 nos. @9.23 Kg. per sheet = 46.15 Kg. +
Add 2% wastage = 0.91 Kg.
Total = 47.07 Kg.
Say 47 Kg.
9977 Carriage of seam bolts and washers 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.5.1 12.5 Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer
coated
12.5.1 1.60 mm J,thick
or L hooks, bolts
with zinc and nuts
coating 8 mm
not less dia350
than G.I.gm/m²
limpet and bitumen washers
Details of cost for 9.325m
MATERIAL
G.I. plain sheets 2.5x0.9m
4 nos. @ 29.95Kg/sheet =119.80Kg.+
Add 2% wastage = 2.40Kg.
Total = 122.20 kg. or 1.222q.
9977 Carriage of bolts, nuts and washers 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.6.1 12.6 Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer
coated
12.6.1 1.00 mm J thick
or L hooks, bolts
with zinc and nuts,
coating G.l. limpet
not less than 275and bitumen washer complete,
gm/m²
Consider a length of flashing 12.125 metres.
MATERIAL
G.I. plain sheet 1.25mm thick 3.2x0.75m
2 nos. @ 20.64 Kg. = 41.28 Kg.+
Add 2% wastage = 0.83 Kg
Total = 42.11 Kg. or 0.4211 quintal
(taking 2 bolts per joints)
9977 Carriage of G.I. seam bolts and washers 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.7.1 12.7 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet
gutter
12.7.1 0.80 mmwith ironwith
thick brackets 40x3mm
zinc coating size,
not lessbolts,
than nuts and washers etc., including
275 gm/m²

275gm/m2
Consider a length of 9.04m
Sheet used = 2.5x0.90m
= 2 nos.
Wt. = 2x15.82=31.64 Kg. = 0.3164q
Total = 0.3164quintal
MATERIAL
1024 Galvanised steel bolts & nuts 10 mm dia and 9 each
1210 G.I. plain washer thin 21 100 Nos
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.7.2 12.7 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet
gutter
12.7.2 0.63 mmwith ironwith
thick brackets 40x3mm
zinc coating size,
not lessbolts,
than nuts and washers etc., including
275 gm/m²

275gm/m2
Sheet used = 2.5x0.90m
= 2 nos.
Wt. = 2x11.82=23.64 Kg. = 0.2364q
Total = 0.2364quintal
MATERIAL
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.8 12.8 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6
Code mm thick corrugated sheets (as per IS: 14871)
Description Rateroofing up toUnit
any pitch and fixing
Details of cost for 216.14 sqm area of roof

upto 60° pitch
Upto 60 degree pitch
Consider a shed of 20x10 metres.
(External dimensions of plinth).
Area of roof-
20.2x10.70m = 216.14 sqm.
MATERIAL
Sheets used = 2x20 nos.x3.00mx1.05m=126.00sqm+
2x20nos.x2.50mx1.05m=105.00sqm.
Total = 231.00sqm. +
Total = 237.93sqm.
223 Fibre (high impact poly propelene reinforced) 225 sqm
2x20x0.42147 = 1.68588 +
2x20x0.35123= 1.4049
Total = 3.0908+
Add 3 % wastage = 0.092
Total = 3.1835 Say 3.184 t
1209 G.I. plain washer thick 35 100 Nos
9977 Carriage of bolts and nuts, washers etc. 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm.
Cost of 1.00 sqm.
Say
12.9 12.9 Extra for straight cutting in reinforced by organic fibres and/or inorganic
Code synthetic fibres cement corrugated, semi corrugated
Description Rate 6 mm Unit
thick sheet roofing
Details of cost for 3 metres of periphery
Area of cutting 0.9mx0.6m=0.54sqm.

Perimeter = 3 metres
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 3.00 metres
Cost for 1.00 metre of periphery
Say
12.1 12.1 Extra for circular cutting in reinforced by organic fibres and/or inorganic
Code synthetic fibres cement corrugated/ semi corrugated
thick sheet roofing
Details of cost for 4 holes of 0.72 metric diameter i.e. 9.05 metric perip
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 metre of periphery
Say
12.11 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
Extra for providing and fixing wind ties of 40x6mm flat iron section.
M.S. flat 40x6mm = 30 metres+
wastage @ 5% = 1.5 metres
= 31.50 metres @ 1.9 Kg per metre
= 59.85 Kg. = 0.5985 quintal
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.12.1 12.12 Providing and fixing ridges and hips in fibre cement reinforced by organic fibres
and/or inorganic
12.12.1 Corrugated synthetic
serrated fibresridges
adjustable roofing with suitable fixing accessories or self
Details of cost for length of ridge 20.2

metres
One piece corrugated serrated adjustable ridges
Consider a shed of 20x10m (external dimensions at plinth).
Length of ridges 20.2 metre
MATERIAL
Ridge piece required each of 1.22mm length = 19 nos. +
Add 5% wastage = 0.95 No.
Nos x 1.22 = 24.339 metre
225 Fibre (high impact poly propelene reinforced) 210 metre
9977 Carriage (The ridge is to be fixed with the sa 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
and/orwing
12.12.2 Plain inorganic synthetic
adjustable fibres roofing with suitable fixing accessories or self
ridges

metres
Plain wing adjustable ridges
MATERIAL
Ridge piece required each of 1.22m length = 19 nos. +
nos x 1.22 = 24.339 metre
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
and/orfitting
12.12.3 Close inorganic synthetic
adjustable fibres roofing with suitable fixing accessories or self
ridges

metres
Close fitting adjustable ridges
No. of ridge pairs required, of length
1.22m each = 22.00 nos. +
Add 5% wastage = 1.10 Nos.
= 23.10 nos.x 1.22= 28.182 metre
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
and/or inorganic
12.12.4 Unserrated synthetic
adjustable hipsfibres roofing with suitable fixing accessories or self
Details of cost for a shed with hip as 20.2

metres
Unserrated adjustable hips
Consider a shed with hip as 20.2 metres
No. of hi pieces required = 19 pairs
Length of each pair 1.22 metres
Add 5 % wastage
= 0.95 pairs
= 19.95 pairs x 1.22 = 24.339 metre
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.13.1 12.13 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic
synthetic fibres
12.13.1 Corrugated roofing
apron piecesaccessories in all colours with polymer coated J or L
Details for shed of 20.2 metres completed length
MATERIAL
Corrugated appron pieces of 1.12 metre
length = 20 nos.+
Total = 21 nos.x 1.12=23.52 metre
9977 Carriage of appron pieces. (The appron pieces 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
synthetic
12.13.2 Eave's fibres
filler roofing accessories in all colours with polymer coated J or L
pieces
Details of eaves filler for a shed of 20.2 metres complete length
MATERIAL
Eaves filler pieces of 0.16 metres
length = 20 nos.+
Total = 21 nos.
229 Fibre (high impact poly propelene reinforced) 175 each
9999 (The eaves filler pieces are to be fixed with 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
synthetic
12.13.3 North lightfibres roofing accessories in all colours with polymer coated J or L
curves
Details of North light curve 20.2 metres long complete length
MATERIAL
North light curves of 1.016 metres
nominal length = 20 nos. +
= 21 nos.x 1.016 = 21.336 metre
9977 Carriage of hooks, nuts, washers and curves 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
synthetic fibres
12.13.4 Ventilator curvesroofing accessories in all colours with polymer coated J or L
Details of ventilator curve 20.2 metres long complete length
MATERIAL
North light curves of 1.016 metres
Total = 21 nos.x 1.016 = 21.336 metre
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
synthetic
12.13.5 Barge fibres roofing accessories in all colours with polymer coated J or L
boards
Details of cost for 9.70 metres
Completed length of barge boards
MATERIAL
Barge boards 2.50metres = 4 nos. x 2.50 = 10.00 metre
Add 5% wastage = 0.50 metre.
Total = 10.50 metre.
232 Fibre (high impact poly propelene reinforced 400 metre
9977 Carriage of barge boards, bolts, nuts and was 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 9.70 metre
Cost of 1.00 metre
Say
synthetic
12.13.6 Ridge fibres roofing accessories in all colours with polymer coated J or L
finials
Details of a pair of ridge final
MATERIAL
Ride final = pair
Add 5% wastage = 0.05pair.
Total = 1.05 pair
233 Fibre (high impact poly propelene reinforced) 165 pair
9988 Carriage, sundries, fixing charges including p 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 pair
Say
synthetic
12.13.7 Special fibres
north roofing
light accessories in all colours with polymer coated J or L
curves
Details of special north light ventilator curve 20.2 metres long complete
MATERIAL
Special north light curves of 1.016 metres
Total = 21 nos.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20 nos
Cost of 1.00 no
Say
12.13.8 Ssynthetic fibres roofing accessories in all colours with polymer coated J or L
type louvers
MATERIAL
S type louvers = 5 nos.+
Add 5% wastage = 0.25 nos.
Total = 5.25 nos.
1031 Galvanised steel bolts & nuts 10 mm dia and 2 20 each
1032 Galvanised steel bolts 10 mm dia and 7 cm lo 6 each
9977 Carriage of bolts and nuts and washers 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 8.74 metres
Cost of 1.00 metre
Say
12.14 12.14 Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and
washers etc. for fixing G.S. sheets gutters with purlins.
Detail of cost for 20 metres
MATERIAL
Flat 50x3mm size
1025 Mild stel bolts 6 mm dia and 25 mm long with 10 10 Nos
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
12.15.1 12.15 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm
impregnated
12.15.1 With residualwith
typeapetroleum
coat of coarse sand
bitumen ofat 60 cudm
grade VG -10per 10 sqm, including
Details of cost for 10 Sqm.
MATERIAL
Bitumen 80/100
309 Paving bitumen VG-10 of approved quality 25614 tonne
771 Kerosene oil 50 litre
370 Coal (steam) 440 quintal
LABOUR
114 Beldar 645 Day
(for cleaning the surface, applying kerosene oil, heating materials and c
131 Painter 714 Day
9999 Sundries (Brushes and T and P) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.16.1 12.16 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope
consolidated
12.16.1 With commonand plastered
burnt with 25 mm
clay F.P.S.(non thick mud
modular) brickmortar mixeddesignation
tile of class with bhusa 10
@ 35
Details of cost for (mud) 10.00sqm.
MATERIAL
Mud Phuska = 1.048 cum. +
Wastage 20% = 0.209
= 1.257 cum.
811 Mud (dry) 165 cum
Mud mortar for 25 mm thick plaster over phuska
Bhusa 0.263x35 = 9.20 +
5% wastage = 0.46
Total = 9.66 Kg. say 100 kg = 0.1 q
308 Bhusa 500 quintal
9999 Cowdung 2.12 L.S.
9999 Mud mortar for gobri leaping 2.12 L.S.
9977 Carriage of bhusa and cowdung 2.12 L.S.
Tile bricks 22.9x11.4x4.4cm of designation

100
Cement mortar for grouting 1:3 (1 cement : 3 fine sand)
Integral water proofing compound 2% by weight of cement
1213 Water proofing materials 35 kilogra
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.17.1 12.17 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope
consolidated
12.17.1 With machineand plastered
moulded with 25
common mmclay
burnt thick mud (non
F.P.S. mortar with bhusha
modular) @ 35of
brick tiles kg
Code class designation 12.5, conforming to IS 2690
Details of cost for (mud) 10.00sqm.
MATERIAL
Mud Phuska = 1.048 cum.
Wastage 20% = 0.209
= 1.257 cum.
Mud mortar for 25 mm thick plaster over phuska
Bhusa 0.263x35 = 9.20
5% wastage = 0.46
Total = 9.66 Kg. say 100 kg = 0.1 q
9999 Cowdung 2.12 L.S.
9999 Mud mortar for gobri leaping 2.12 L.S.
9977 Carriage of bhusa and cowdung 2.12 L.S.
7904 Machine moulded common burnt clay tile brick 4600 ### Nos
Integral water proofing compound 2% by

weight of cement
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.18 12.18 Extra for every additional 1 cm thickness of mud phaska.

MATERIAL
For 10 cm thickness
Mud Phuska = 1.048 cum. +
Wastage 20% = 0.209
= 1.257 cum.
Quantity for 1 cm thickness 1.257/10 = 0.1257 cum say 0.13 cum
114 Beldar 645 Day
101 Bhisti 714 Day
9999 Labour for leaping and carring to roof 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.19.1 12.19 Providing and laying brick tiles over mumty roofs, grouted with cement mortar
1:3 (1common
12.19.1 With cement :burnt
3 fineclay
sand) mixed
F.P.S. with
(non 2% of integral
modular) water
brick tiles proofing
of class compound
designation 10
Details of cost for 10 square metre.
MATERIAL

weight of cement
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.2 12.2 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal
Code thickness of approved size) on roofs jointed
Description with cement mortar
Rate Unit 1:4 (1 cement : 4
MATERIAL
7266 Pressed clay tiles 20 mm thick 250 x 250 mm 8000 ### Nos

weight of cement
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.21.1 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
stone aggregate 10 mm and down gauge), including finishing with cement morta
12.21.1 In 75x75 mm deep chase
Details of cost for 10 metres cement concrete
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
9999 Hire and running charge of mechanical mixer 2.12 L.S.
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Hire and running charges of mechanical mixer 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
12.22 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement
Code concrete 1:2:4 (1 cement : 2 coarse sand : 4
Description graded stone aggregate
Rate Unit of 20 mm
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
9999 Hire and running charge of mechanical mixer 2.12 L.S.
3002 Polyvinyle chloride sheet 400 micron thick 45 sqm
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
9999 Rounding of edges and making outlet 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no.
Say
12.23.1.1 12.23 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1
cement
12.23.1 Red sand: 4stone
coarse sand) over wooden karries or R.C.C. battens or structural stee
slab
12.23.1.140 to 50 mm thick
MATERIAL
1174 Red sand stone slab 45 mm and 50 mm thick 260 sqm
including wastage @ 10% = 11 sqm
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.23.2.1 12.23 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1
cement
12.23.2 White : 4 coarse
sand sand) over wooden karries or R.C.C. battens or structural stee
stone slab
12.23.2.140 to 50 mm thick
MATERIAL
1175 White sand stone slab 45 mm and 50 mm thic 280 sqm
including wastage @ 10% = 11sqm
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.24.1.1 12.24 Providing and fixing insulating board ceiling of approved quality with necessary
nails etc.
12.24.1 Natural complete
colour (frameboard
insulating work to be paid separately) :
12.24.1.112 mm thick
MATERIAL
332 Natural colour insulating board:12 mm thick 210 sqm
including 10% wastage = 11.00 sqm
9999 Nails 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
nails etc.
12.24.2 White facecomplete (frame
insulating boardwork to be paid separately) :
12.24.2.112 mm thick
MATERIAL
328 White face insulating board:12 mm thick 235 sqm
9999 Nails 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
nails etc.
12.24.3 Flame complete
retardant (frame
face work board
insulating to be paid separately) :
12.24.3.112 mm thick
MATERIAL
336 Flame retardent face insulating board: 12 mm 320 sqm
9999 Nails 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
9.147D 12.25 Providing and fixing flat pressed 3 layer medium density particle board or graded
particle
12.25.1 12 board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc.
mm thick
MATERIAL
9999 Nails 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.26.1 12.26 Providing and fixing plain multipurpose cement board(Hight pressure steam
12.26.1 6cured) with Cement
mm thick suitable fiber
screws for cement
board particle
as per IS: 14862 board in ceiling etc. complete
MATERIAL
236 Multi purpose fibre (high impact poly propele 210 sqm
9999 Nails 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.26.2 12.26 Providing and fixing plain multipurpose cement board(Hight pressure steam
12.26.2 6cured) with Cement
mm thick suitable bonded
screws wood
for cement particle
particle boardboard
as perinIS:14276
ceiling etc. complete
MATERIAL
242 6 mm thick multi purpose cement bonded wood 195 sqm
10.00 sqm + 1.00 sqm (Add wastage 10%)

Total = 11.00 sqm
9999 Nails 2.12 L.S.
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
12.27.1 12.27 Extra for Circular cutting including wastages in ceiling with:
12.27.1 2nd class teak wood planks 20 mm thick
Details of cost for 10 holes of 0.5m dia each

(15.71m)
MATERIAL
0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm x 20mm = 0.043 cum
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.2.1 12.27 Extra for Circular cutting including wastages in ceiling with:
12.27.2 Natural colour insulating board
12.27.2.112 mm thick
Details of cost for 15.71 metre
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm.
332 Natural colour insulating board:12 mm thick 210 sqm
9999 Nails- 2.12 L.S.
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.3 White face insulating board:
12.27.3.112 mm thick
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm.
328 White face insulating board:12 mm thick 235 sqm
9999 Nails- 2.12 L.S.
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.4 Flame retardant face insulating board:
12.27.4.112 mm thick
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm.
336 Flame retardent face insulating board: 12 mm 320 sqm
9999 Nails- 2.12 L.S.
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.5 Standard quality hard board sheet:
12.27.5.13 mm thick
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm.
994 Standard quality hard board sheet 3 mm thick 135 sqm
9999 Nails- 2.12 L.S.
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.27.5 Standard quality hard board sheet:
12.27.5.24.5 mm thick
MATERIAL
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Total = 2.15 sqm.
996 Standard quality hard board sheet 4.5 mm thi 210 sqm
9999 Nails- 2.12 L.S.
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 15.71 metre
Cost of 1.00 metre
Say
12.28 12.28 Extra for providing and fixing ceiling to curved surfaces in narrow widths
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.29.1 12.31 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a heigh
of 5 surfaces
12.31.1 Flat m above floor level, over first class kail wood strips 25x6 mm with 10 mm
Details of cost for 4.00x2.5=10sqm.
MATERIAL
Wooden strips of 1st class kail wood
72x40x0.25x0.06 = 43.20 cudm. +
Add 10% wastage = 4.32 cudm.
Total = 47.52
1196 First class kail wood in planks 300 10 cudm
1219 Wire nails 58 kilogra
required for fixing the laths to frame work including breakage and wasta
Rabbit wire mesh required for reinforcement =2.5x4 = 4 = 10.00sqm.+
Total = 10.2 sqm.
1220 Wire mesh (rabbit) 42 sqm
Plaster of paris -
2.5x4.0x10x1121/1000 = 112.10 kg.
Add for plaster of paris joining into the side of the laths-
2.5x4.0x4.0032x1121 = 44.87 kg.
Total = 156.97+
Total = 219.76 kg
2308 Carriage of Plaster of paris 145.72 tonne
9977 Carriage of wiremesh and nails etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
For doing plaster of paris over wooden strips
122 Mason (for plaster of paris work) 1st class 784 Day
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.29.2 12.31 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a heigh
of 5 m above
12.31.2 Curved floor level, over first class kail wood strips 25x6 mm with 10 mm
surfaces
Details of cost for 4.00x2.5=10sqm.
MATERIAL
Wooden strips of 1st class kail wood
72x40x0.25x0.06 = 43.20 cudm. +
Add 10% wastage = 4.32 cudm.
Total = 47.52
1219 Wire nails 58 kilogra
required for fixing the laths to frame work including breakage and wasta
Rabbit wire mesh required for reinforcement =2.5x4 = 4 = 10.00sqm.+
Total = 10.2 sqm.
1220 Wire mesh (rabbit) 42 sqm
Plaster of paris -
2.5x4.0x10x1121/1000 = 112.10 kg.
Add for plaster of paris joining into the side of the laths-
2.5x4.0x4.0032x1121 = 44.87 kg.
Total = 156.97+
Total = 219.76 kg
9977 Carriage of wiremesh and nails etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
101 Bhisti 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.3 12.32 Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous)
Code ceiling.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.31 12.33 Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5 metres
Code height from floor level.
Details of cost for 10sqm/metre height
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00sqm / metre height
Cost of 1.00 sqm. / metre height
Say
12.32 12.34 Providing fixing thermal insulation of ceiling (under deck insulation) with Resin
Code Bonded Fibre glass wool conforming to IS Rate
Description : 8183, density 24kg
Unit / m3, 50mm thick,
Area for 10.00sqm. (Finished surface) = 10.00sqm.+
Add 10% for overlappings & wastage = 1.00sqm.
Total = 11.00sqm.
7232 Resin Bonded Glass wool 24 kg/m³ 50 mm th 130 sqm
9999 Sundries including GI wire 20 SWG and Virgi 2.12 L.S.
9999 GI chiken mesh 12.5mm x 24 SWG 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00 sqm.
Cost for sqm.
Say
12.33 12.35 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool
Code conforming to IS: 8183. Density 16 kg/m³, 50
Description mm thick, wrapped
Rate Unit in 200G Virgin
Area for 10.00sqm. (Finished surface) = 10.00sqm.+
Add 10% for overlappings & wastage = 1.00sqm.
Total = 11.00sqm.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00 sqm.
Cost for sqm.
Say
12.34.1 12.36 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable
adhesive
12.36.1 With TypetoNthe false ceiling
- Normal 50 mmas per the directions of the Engineer-in-charge:
thick
Cost of materials :
Expanded Polystyrens 1x10=10.00sqm. +
Total = 11.00sqm.
7090 Expanded polystyrene type N- Normal 120 sqm
314 Bitumen hot sealing compound : grade A 29 kilogra
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00 sqm.
Cost for sqm.
Say
12.34.2 12.36 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable
adhesive
12.36.2 With TypetoSEthe falseExtinguishing
- Self ceiling as pertype
the directions
50 mm thickof the Engineer-in-charge:
Cost of materials :
Expanded Polystyrens 1x10=10.00sqm. +
Total = 11.00sqm.
7091 Expanded polystyrene type - SE 140 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00 sqm.
Cost for sqm.
Say
12.35.1 12.37 Providing and fixing 100 mm diameter and 60 cm long rain water spout in cemen
mortarware
12.37.1 Stone 1:4 (1spout
cement : 4 fine sand).
Details of cost for 10 stone ware spout of 60cm long
MATERIAL
3004 Stone ware spouts 100 mm dia 60 cm long 45 each
9999 Mortar 2.12 L.S.
Labour for fixing and placing in position
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 spouts
Cost of 1.00 spout
Say
12.36.1 12.38 Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I.
rain mm
12.38.1 100 water pipes embedded in and including cement concrete blocks 10x10x10
diameter
MATERIAL
1331 M.S.Holder bat clamp of approved design for 30 each
C.C. block 5x0.1x0.1x0.1 = 0.005 cum
9977 Carriage of bat clamps 2.12 L.S.
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
9999 Hire charges of machine etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.00 bat clamps
Say
12.36.2 12.38 Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I.
rain mm
12.38.2 150 water pipes embedded in and including cement concrete blocks 10x10x10
diameter
MATERIAL
886 Standard holdar bat clamps for sand cast iron 45 each
C.C. block 5x0.1x0.1x0.1 = 0.005 cum
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
12.37.1 12.39 Providing lead caulked joints to sand cast iron rain water pipes and fittings:
12.39.1 100 mm dia Pipe
Details of cost for one joint.
MATERIAL
865 Pig lead 130 kilogra
1001 Spun yarn 50 kilogra
9999 Kerosene oil fuel and sundries 2.12 L.S.
LABOUR
117 Assistant Fitter or 2nd class Fitter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 joint.
Say
12.37.2 12.39 Providing lead caulked joints to sand cast iron rain water pipes and fittings:
12.39.2 150 mm dia Pipe
Details of cost for one joint.
MATERIAL
9999 Kerosene oil fuel and sundries 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 joint.
Say
12.38.1.1 12.4 Providing, fixing and embedding sand cast iron accessories for rain water pipes
in the cast
12.40.1 Sand masonry surrounded
iron plain shoes :with 12 mm thick cement mortar of the same mix, as
12.40.1.1150 mm diameter
Details of cost for one shoe
966 Sand Cast iron plain shoe 150 mm dia 285 each
9988 Carriage, fixing and mortar 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 bend
Say
12.39.1 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming
12.41.1 75 to IS : 13592 Type A, including jointing with seal ring conforming to
mm diameter
7188 U-PVC pipes (working pressure 4 kg / cm^2) 70 metre
7190 U-PVC pipes (working pressure 4 kg / cm^2) 8 each
9999 Adhesive, and sundries etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
9999 Scaffolding etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6.00 metre
Cost of 1.00 metre
Say
12.39.2 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming
12.41.2 110 to IS : 13592 Type A, including jointing with seal ring conforming to
mm diameter
7189 U-PVC pipes (working pressure 4 kg / cm^2) 130 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6.00 metre
Cost of 1.00 metre
Say
12.40.1.1 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.1 Coupler
12.42.1.175 mm
Details of cost for 1 coupler
7192 UPVC coupler for UPVC drainage pipes 75 18 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 coupler
Say
accessories for unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.1 Coupler
12.42.1.2110 mm
7193 UPVC coupler for UPVC drainage pipes 110 39 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 coupler
Say
accessories
12.42.2 Single forCoupler
pushfit unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.2.175 mm
7194 UPVC pushfit coupler (single) 75 mm thick 18 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 coupler
Say
accessories
12.42.2 Single forCoupler
pushfit unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.2.2110 mm
7195 UPVC pushfit coupler (single) 110 mm thick 32 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 coupler
Say
accessories
12.42.3 Single fordoor
tee with unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.3.175x75x75 mm
Details of cost for 1 tee
MATERIAL
7198 UPVC single equal Tee (with door) 75x75x7 59 each
9988 Adhesive, Carriage of material rubber washer e 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 tee
Say
accessories
12.42.3 Single fordoor
tee with unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.3.2110x110x110 mm
MATERIAL
7199 UPVC single equal Tee (with door) 110x110 92 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 tee
Say
accessories
12.42.4 Single for unplasticised
tee without door Rigid PVC rain water pipes conforming to IS :
12.42.4.175x75x75 mm
MATERIAL
7196 UPVC single equal Tee (with door) 75x75x7 46 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 tee
Say
accessories
12.42.4 Single for unplasticised
tee without door Rigid PVC rain water pipes conforming to IS :
12.42.4.2110x110x110 mm
MATERIAL
7197 UPVC single equal Tee (with door) 110x110 81 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 tee
Say
accessories
12.42.5 Bend 87.5° for unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.5.175 mm bend
Details of cost for 1 bend
7208 UPVC bend 87.5° 75 mm bend 35 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 coupler
Say
accessories
12.42.5 Bend 87.5° for unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.5.2110 mm bend
Details of cost for 1 bend
7209 UPVC bend 87.5° 110 mm bend 59 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 coupler
Say
accessories
12.42.6 Shoe (Plain) for unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.6.175 mm Shoe
Details of cost for 1 shoe
7212 UPVC plain shoe 75 mm bend 27 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 coupler
Say
accessories
12.42.6 Shoe (Plain) for unplasticised Rigid PVC rain water pipes conforming to IS :
12.42.6.2110 mm Shoe
Details of cost for 1 shoe
7213 UPVC plain shoe 110 mm bend 47 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 coupler
Say
12.41.1 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to
unplasticised
12.43.1 75 mm - PVC rain water pipes by means of 50x50x50 mm hard wood plugs
MATERIAL
7214 UPVC pipe clip 75 mm bend 15 each
9977 Carriage of U-PVC pipe clips 2.12 L.S.
870 Plug 10 each
Labour :-
114 Beldar 645 Day
9999 Sundries cement mortar 1:4 (1Cement : 4 Coa 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 Nos.
Cost of 1 No.
Say
12.41.2 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to
unplasticised
12.43.2 110 mm - PVC rain water pipes by means of 50x50x50 mm hard wood plugs
MATERIAL
7215 UPVC pipe clip 110 mm bend 14 each
9977 Carriage of U-PVC pipe clips 2.12 L.S.
870 Plug 10 each
Labour :-
114 Beldar 645 Day
9999 Sundries cement mortar 1:4 (1Cement : 4 Coa 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5 Nos.
Cost of 1 No.
Say
12.42 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm
Code diameter and weighing not less than 440 grams.
Details of cost for 1 grating
MATERIAL
7187 C.I. grating 150 mm dia. (Weighing not less t 27 each
9988 Carriage of materials and fixing charges 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each grating
Say
12.43.1 12.45 Providing and fixing false ceiling at all height including providing and fixing of
frame
12.45.1 12.5 work
mm made
thick of special
tapered edge sections, power
gypsum plain pressed
board from M.S.
conforming sheets
to IS: and
2095- (Part
Code I) :2011 (Board with BIS certification marks)Rate
Description Unit
Details of cost for 10.8x9.6m = 103.68sqm.
MATERIAL
Gypsum board 12.5mm thick = 103.68 sqm.+
Total = 108.86 sqm.
7009 12.5 mm thick tapered edge gypsum plain bor 140 sqm
7010 Galvanised Steel ceiling section (size 80x26 46 metre
7011 Galvanised Steel perimetre Channel (Size 2 22 metre
7012 Galvanised Steel intermediate Channel (Siz 38 metre
Strap hanger
7013 Galvanised Steel angle hanger (Celling angl 12 metre
7014 Galvanised Steel connecting clips (2.64mm d 4 each
7015 Galvanised Steel soffit cleat (Size 27x37x25 3 each
7016 Joint filler 24 kilogra
7017 Joint finisher 21 kilogra
9999 Sundries like rawl plug scaffolding etc 2.12 L.S.
9977 Carriage of material etc. 2.12 L.S.
Labour :-
114 Beldar 645 Day
131 Painter 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 103.68 sqm.
Cost of 1 Sqm.
Say
frame
12.45.2 12.5 mmwork made
thick of special
tapered edge sections, power pressed
Glass Reinforced Gypsum from M.S.board
(GRG) sheets and
conforming
Code to IS: 2095- (Part 3):1996 (Boards with BIS certification
Description Rate marks)
Unit
MATERIAL
Total = 108.86 sqm.
7366 Glass reinforced Gypsum ( GRG) board 12.5 mm 240 sqm
Labour :-
114 Beldar 645 Day
131 Painter 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Sqm.
Say
frame
12.45.3 12.5 mmwork made
thick of special
tapered sections,moisture
edge gypsum power pressed from
resistant M.S. sheets and
board
MATERIAL
Total = 108.86 sqm.
7031 12.5 mm thick tapered edge gypsum moisture 250 sqm
Labour :-
114 Beldar 645 Day
131 Painter 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Sqm.
Say
12.45.4 frame work madeGypsum
Fully Perforated of special sections,
Plaster Boardpower pressed
of size 1200 xfrom M.S. sheets
2400x12.5 and
mm having
Code approx. 15 % perforated area with perforation
Description Ratesize and pattern
Unitas approved by
MATERIAL
Total = 108.86 sqm.
7028 12.5 mm thick Fully Perforated gypsum board 380 sqm
Labour :-
114 Beldar 645 Day
131 Painter 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Sqm.
Say
12.44 12.46 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering
Code Thermoplastic) grating square (Slit) 150 mm
Description square with a height
Rate Unit of 8 mm and
Details of cost for 1 grating
MATERIAL
7857 P.T.M.T. Grating square slit 150mm 45 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each grating
Say
12.45.1 12.47 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to
12.47.1 any
2 mm pitch,
thickincluding
corrugatedfixing with
(2.5" polymer
or 4.2" coated
or 6") 'J' or 'L' (2"
or step-down hooks,
or 3"bolts
or 6"&) nuts
as 8mm
Code specified
Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
MATERIAL
8668 UV stabilised 2 mm thick corrugated FRP she 525 sqm
9977 Carriage of sheet 2.12 L.S.
Breadth is 5.1metre

884+810= 1694
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Sqm.
Say
12.45.2 12.47 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to
12.47.2 2any
mm pitch,
thickincluding
flat fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm
Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
MATERIAL
8667 UV stabilised 2 mm thick plain FRP sheet 450 sqm
9977 Carriage of sheet 2.12 L.S.
Breadth is 5.1metre

884+810= 1694
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Sqm.
Say
12.46 12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
Code thickness and of approved size and as per Rate
Description approved patternUniton steel frame work
MATERIAL
8670 Mangalore tiles 20 mm thick 8 each
LABOUR
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
12.47 12.49 Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm
Code thickness and of approved pattern on steelRate
Description frame work complete
Unit (steel frame
MATERIAL
8669 Mangalore ridge tiles 20 mm thick 8 each
LABOUR
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
12.48 12.5 Providing and fixing precoated galvanised iron profile sheets (size, shape and
Code pitch of corrugation as approved by Engineer-in-charge)
Description Rate 0.50 mm (+ 0.05 %) total
Unit
Details of cost of 216.14 sqm.
Area of roof-
20.2x10.70m = 216.14 sqm.
MATERIAL
Sheets used = 20 nos.x10.70mx1.06m = 226.84sqm
Total = 233.65sqm.
8671 Precoated galvanised iron profile sheet 0.50 375 sqm
9977 Carriage of sheets 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm.
Cost of 1.00 sqm.
Say
12.49.1 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50
mm (+0.05
12.51.1 Ridges %)(500
plain total- coated
600mm)thickness, Zinc coating 120 grams per sqm as per IS:
Detail of cost for 20.20 metre
One piece plain ridges
Length of ridges 20.2 metre + 5% wastage = 23.11 metre.
MATERIAL
8672 Precoated galvanised steel plain ridges 0.5 225 metre
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
mm (+0.05 %)
12.51.2 Flashings/ total coated
Aprons.( thickness,
Upto 600 mm) Zinc coating 120 grams per sqm as per IS:
MATERIAL
8673 Precoated galvanised steel flashings/apron 235 metre
20.20 + 5% wastage = 23.11 metre
9977 Carriage of appron pieces. (The appron pieces 2.12 L.S.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
mm (+0.05
12.51.3 North light %) total coated thickness, Zinc coating 120 grams per sqm as per IS:
curves
Details of North light curve 20.20 metres long complete length
MATERIAL
8675 Precoated galvanised steel north light curves 240 metre
20.20 + 5% wastage = 23.11 metre
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1.00 metre
Say
mm (+0.05
12.51.4 Barge %)(Upto
board total 300
coated
mm)thickness, Zinc coating 120 grams per sqm as per IS:
Completed length of barge boards = 8.23 + 5% wastage = 8.64 metre
MATERIAL
8676 Precoated galvanised steel barge board 230 metre
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 8.23 metre
Cost of 1.00 metre
Say
mm (+0.05
12.51.5 Crimp curve %) total coated thickness, Zinc coating 120 grams per sqm as per IS:
Details of crimp curve 20.2 metres long complete length, Area 20.20
MATERIAL
8677 Precoated galvanised steel crimp curve 235 sqm
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 21.412 sqm
Cost of 1.00 sqm
Say
mm (+0.05
12.51.6 Gutter (600%)
mm total coated
over thickness, Zinc coating 120 grams per sqm as per IS:
all girth)
Detail of cost of 10 metre
0.63mm thick with zinc coating not less than 275gm/sqm
Sheet used = 10x1.06m x 0.60 = 6.36 sqm.
Total = 6.36 metre
8674 Precoated galvanised steel gutter 440 metre
9977 Carriage of gutter 2.12 L.S.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of10.00 metres
Cost of 1.00 metre
Say
12.50.1 12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm
12.52.1 in
GI true horizontal
Metal Ceiling Laylevel,
in suspended onedge
plain Tegular inter Global
lockingwhite
metalcolor
grid of hotofdipped
tiles size
Code 595x595 mm,
Description and 0.5 mm thick with 8 mm drop;
Rate made of G I sheet
Unit having
MATERIAL
Celling Area =100 sqm

Total=100.05 sqm
8599 GI Metal Tile Lay-in Plain Tegular edge globa 625 sqm
8611 Main T ceiling sections 24x38x0.3 mm (3 metr 130 each
Including Wastage @ 10%
8612 Perimeter wall angle 24x24x0.3mm (3 metre 80 each
8613 Intermediate cross T-section 24x25x0.3mm (1. 40 each
Including Wastage @ 10% on Grid for cut outs
8615 Hanger rod 4 mm thick 10 each
8616 Adjustment clip 85x30x0.8mm 6 each
8617 Soffit cleat (Size 27x37x25x1.60mm) 5 each
9999 Sundries i.e. scaffolding etc. 2.12 L.S.
9977 Carriage of materials etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
in true
12.52.2 GI horizontal
Metal Ceiling Laylevel, suspendedTegular
in perforated on interedge
locking metal
global gridcolor
white of hot dipped
tiles of size
Code 595x595 mm and 0.5 mm thick with 8 mm drop;
Description Rate made of GI sheet
Unit having
MATERIAL

Total=100.05 sqm
8600 GI Metal Tile Lay-in Perforated Tegular edge 735 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.52.3 in true
12.5 mm horizontal level,edge
thick square suspended on inter locking
PVC Laminated Gypsummetal grid
Tile of of595x595
size hot dipped
mm,
Code made of Gypsum
Description plasterboard, manufactured
Ratefrom natural gypsum
Unit as per IS
MATERIAL

Total=100.05 sqm
8601 PVC Laminated Gypsum Tiles (Square edge) 880 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
in true
12.52.4 12.5 mm horizontal level,
thick fully suspended
Perforated on inter
Gypsum Boardlocking metalfrom
tile made gridplasterboard
of hot dippedhaving
Code glass fibre
Description conforming to IS: 2095 part I, of size
Rate 595x595 mm, having
Unit perforation
MATERIAL
Total=100.05 sqm
8602 Gypsum Tiles Fully Perforated Square edge 380 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.51 12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light
Code weight calcium silicate false ceiling tiles ofRate
Description approved texture of size 595 x 595
Unit
MATERIAL
8589 Calcium Silicate tegular edged celling tiles 685 sqm
Area = 100 sqm + Add 5% wastage = 5 sqm

Total = 105 sqm
8590 Galvanised Steel main Tee ceiling section Si 140 each
8591 Galvanised Steel perimeter wall Angle Size 2 90 each
8592 Galvanised Steel intermediate cross T section 45 each
8595 Wooden screws with plastic rawl plugs 35x8 1 each
9999 scaffolding etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.52.1 12.54 Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module
12.54.1 which includes
GI Metal Ceilingproviding andBeveled
Clip in plain fixing 'C' wallglobal
edge angle white
of sizecolor
20x30x20
tiles ofmm made of
size
Code 600x600 and 0.5 mm thick with 25 mm height,
Description Ratemade of G I sheet
Unit having
MATERIAL

Total=105 sqm
8597 GI Metal Tile Clip in Plain Beveled edge glob 710 sqm
8604 Spring T-section 24x34x0.45 mm (3.00 meter 220 metre
8605 C Wall angle section 20x30x20x0.50 mm (3.00 110 metre
8606 Main C Carrier Size 10x38x10x0.70mm (3.00 130 metre
8607 Spring T-connector 5 each
8608 C Carrier Connector 12 each
8609 C Suspension Clip 10 each
8610 Wire Coupling Clip 10 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.52.2 12.54 Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module
12.54.2 which includes
GI Metal Ceilingproviding andBeveled
Clip in plain fixing 'C' wallglobal
edge angle white
of sizecolor
20x30x20
tiles ofmm made of
size
Code 600x600 and 0.5 mm thick with 25 mm height,
Description Ratemade of G I sheet
Unit having
MATERIAL

Total=105 sqm
8598 GI Metal Tile Clip in Perforated Beveled edge 800 sqm
8604 Spring T-section 24x34x0.45 mm (3.00 meter 220 metre
8605 C Wall angle section 20x30x20x0.50 mm (3.00 110 metre
8606 Main C Carrier Size 10x38x10x0.70mm (3.00 130 metre
8607 Spring T-connector 5 each
8608 C Carrier Connector 12 each
8609 C Suspension Clip 10 each
8610 Wire Coupling Clip 10 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.53 12.55 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm)
Code with SRI (solar refractive index) > 78, solar Rate
Description reflection > 0.70 Unit
and initial emittance
Area= 10 sqm+
Add wastage @ 3%=0.3 sqm
Total=10.30 sqm
MATERIAL
1204 Precast heat resistant terrace tiles (size 3 409 sqm
Cement mortar 1:4 (1 cement : 4 coarse

sand)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
12.54 12.56 Providing and laying roof insulation with 40 mm thick impervious sprayed,
Code closed cell free Rigid Polyurethane foam over
Description Ratedeck insulation
Unitconforming to IS -
MATERIAL
7050 PU Primer 50 sqm
Area for PU Spray = 1 sqm+

Total=1.10 sqm
7051 40 mm (average) PU spray having 40-45 kg/m 350 sqm
7052 GI wire netting 3/4" x 24 G 26 sqm
9999 Polymerized mastic for all joints 2.12 L.S.
7053 400 G polythene sheet 12 sqm
9999 Cement 2.12 L.S.
9999 Graded stone 2.12 L.S.
9999 Sand 2.12 L.S.
LABOUR
9999 For PU spray 2.12 L.S.
9999 For cement screed with Polythene sheet 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Total
Cost for 1 sqm
Say
12.55 12.57 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool
Code conforming to IS: 8183 having density 24 kg/m3,
Description Rate 50 mm thick,
Unitwrapped in 200G
MATERIAL
Area for 10.00sqm. (Finished surface) =
10.00sqm.+
Add Wastage @ 10% =1.00 sqm
Total =11.00sqm
9999 Sundries including GL wire 20 SWg and Virg 2.12 L.S.
LABOUR
114 Beldar 645 Day
9999 Sundries (screws and washers) 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
12.58.1 in truethick
8 mm horizontal level, suspended
fully perforated calciumon interlocking
silicate metalwith
board made gridCalcareous
of hot dipped
&
Code Siliceous
Descriptionmaterials reinforced with cellulose fiber
Rate manufactured
Unit through

Ceiling area = 100 sq.m
Add wastage @ 5% = 0.05 Sqm
Total =100.05 Sq.m
MATERIALS :
8784 8mm thick Calcium silicate perforated tiles o 850 sqm
9999 Sundries i.e scaffolding etc. 2.12 L.S.
LABOUR :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
12.57.1 12.59 Providing & fixing false ceiling at all height including providing & fixing of
12.59.1 8framework
mm thick made of special
Calcium Silicatesection, power
Board made pressed
with from M.S.
Calcareous sheets and
& Siliceous materials
Code reinforced
Description with cellulose fiber manufactured through
Rate autoclaving
Unit process.
Details of cost for 10.8 m x 9.6m = 103.68

sqm
MATERIALS:
Area = 103.68 sq.m + Add. Wastage of
5% = 5.18 Sq.m Total = 108.86 Sqm
MATERIALS :
8699 8 mm thick tapered edge calcium silicate boar 270 sqm
7010 G.I Ceiling Section (80 x26mm x26mm x10.5m 46 metre
7018 Joint Tape roll (120mm Roll) 90 roll
7021 Primer ( for gypsum board// calcium silicate b 70 litre
9999 Sundries i.e rawl plug, scaffolding etc. 2.12 L.S.
LABOUR :
114 Beldar 645 Day
131 Painter 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 103.68 sqm.
Cost of 1 sqm.
Say
12.58 12.6 Providing and fixing thermal insulation of ceiling (under deck insulation) with
Code Resin Bonded Rockwool conforming to IS:Rate
Description 8183,density 48 Unit
kg/ m3, 50 mm thick,
Details of For 10 sqm

Area for 10.00sqm. (Finished surface)=
10.00sqm.+ Add 10% for ovelappings &
wastage= 1.00sqm. Total= 11.00sqm
7273 Resin Bonded Rockwool 48 kg/m3 110 sqm
9999 Sundries including GI wire 20 SWG and poly 2.12 L.S.
9999 GI chiken mesh 12.5mm x 24 SWG 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
12.59 12.61 Providing and fixing thermal insulation with Resin bonded rock wool conforming
Code to IS: 8183, density 48 kg/m3, 50 mm thick,Rate
Description wrapped in 200 G virgin Polythene
Unit
9999 Sundries including GI wire 20 SWG and poly 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
12.6 12.62 Providing and fixing thermal insulation with Resin Bonded rock wool conforming
Code to IS: 8183, having density 48 kg/m3,50 mmRate
Description thick,wrapped in 200 G Virgin
Unit

LABOUR
114 Beldar 645 Day
9999 Sundries (screws & washers) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
12.61 12.63 Providing and applying two coats of High Albedo paint having minimum Solar
Code Reflective Index (SRI) 108 (with solar reflectance
Description Rate & thermal Unit
emittance tested as
MATERIALS :
7238 High Albedo paint 215 kg
LABOUR :
114 Beldar (for cleanign the surface) 645 Day
131 Painter 714 Day
9999 Sundries (Brushes & T&P etc. 2.12 L.S.
MACHINERY :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Cum.
Cost of 1 Cum.
Say
12.62.1 12.64 Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy
12.64.1 roofing
0.56 mmsheets of alloy
Aluminium IS designation
troughed 31500,
profile with temper
center Hx8 conforming
to center pitch of 200tomm,
IS 737
depth
Code of 32 mm, overall profile width 1092 mm, cover
Description Rate width 1000mm.
Unit
Consider a shed of 20 x 10 meters
(External dimensions of plinth)
Area of roof-20.20 x 10.70m = 216.14 sqm
Material
Sheets used = 20 Nos x 10.70m x 1.092m = 233.69 sqm
Add 3% wastage = 7.01 sqm, Total = 240.70 sqm
9515 Aluminium troughed profile sheet 0.56mm 549 sqm
9535 Stainless steel self tapping screw of 6x60m 50 10 nos
216.14 x 4 = 864.55 nos
9977 Carriage of screws, washers 2.12 L.S.
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.64.2 roofing
0.71 mmsheets
troughedof alloy IS designation
profile 31500,
with center to temper
center Hx8
pitch of conforming
200 mm, depthtoofIS32737
mm,
Code overall profile
Description width 1092 mm, cover width 1000mm.
Rate Unit
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
roofing
12.64.3 0.91 mmsheets
troughedof alloy IS designation
profile 31500,
with center to temper
center Hx8
pitch of conforming
200 mm, depthtoofIS32737
mm,
Code overall profile
Description width 1092 mm, cover width 1000mm.
Rate Unit
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
roofing sheets
12.64.4 0.56mm Aluminiumof alloy IS designation
profile with center31500, temper
to center pitchHx8 conforming
of 175 mm, depth to of
IS 46mm,
737
Code top crest
Descriptionwidth of 41mm, bottom valley width of
Rate 80mm, overall
Unitprofile width of
Material
9518 Aluminium profile sheet 0.56mm 730 sqm
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
roofing sheets
IS 46mm,
737
Code top crest width of 41mm, bottom valley width
Description of 80mm, overall
Rate Unitprofile width of
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
roofing sheets
IS 46mm,
737
Code top crest width of 41mm, bottom valley width
Description of 80mm, overall
Rate Unitprofile width of
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.64.7 roofing
0.56mmsheets
Aluminiumof alloy IS designation
Circular 31500,
(sinusoidal) temper
profile Hx8 conforming
with center to IS 737
to center pitch of 75
Code mm, depth of 19 mm, overall profile width 1250mm,
Description Rate cover width
Unit 1150mm.
Material
Sheets used = 18 Nos x 10.70m x 1.250 m = 240.75 sqm
9521 Aluminium Circular (sinusoidal)profile sheet 520 sqm
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.64.8 roofing
0.71mmsheets
Aluminiumof alloy IS designation
Circular 31500,
(sinusoidal) temper
Code mm, depth
Description of 19 mm, overall profile width 1250mm,
Rate cover width
Unit 1150mm.
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
roofing sheets
Circular 31500,
(sinusoidal) temper
Code mm, depth
Description of 19 mm, overall profile width 1250mm,
Rate cover width
Unit 1150mm.
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.63.1 12.65 Providing & fixing at all heights, levels and locations colour finish Aluminium
alloymm
12.65.1 0.56 roofing sheets of
Aluminium alloy
Color IS designation
coated troughed 31500,
profile temper Hx8 to
with center conforming to IS
center pitch of
Code 200 mm, depth of 32 mm, overall profile width
Description Rate1092 mm, cover
Unitwidth 1000mm.
Material
9524 Precoated Aluminium troughed profile sheet 636 sqm
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
alloymm
Aluminium alloy
center pitch of
Unitwidth 1000mm.
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
alloymm
Aluminium alloy
center pitch of
Unitwidth 1000mm.
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.65.4 alloy roofing
0.56 mm sheets of
Aluminium alloy
color IS designation
to center Hx8
pitch of conforming
175 mm, depthto IS
of
Code 46mm, top
Description crest width of 41mm, bottom valley
Rate width of 80mm,
Unitoverall profile
Material
9527 Aluminium color coated profile sheet 0.56mm 846 sqm
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.65.5 alloy roofing
0.71 mm sheets of
Aluminium alloy
coated 31500,
profile with temper
center Hx8pitch
to center conforming to IS
of 175 mm,
Code depth of 46mm, top crest width of 41mm, bottom
Description Rate valley width of 80mm, overall
Unit
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
alloymm
Aluminium alloy
coated 31500,
profile with temper
center Hx8pitch
to center conforming to IS
of 175 mm,
Code depth of 46mm,
Description top crest width of 41mm, bottom
Rate valley width of
Unit 80mm, overall
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
alloymm
Aluminium alloywith
profile IS designation 31500,
center to center temper
pitch Hx8 conforming
of 177.5 to28.5
mm, depth of IS
Code mm, 987mm overall profile width, cover width
Description Rate900mm Unit
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
alloymm
Aluminium alloywith
profile IS designation 31500,
center to center temper
pitch Hx8 conforming
of 177.5 to28.5
mm, depth of IS
Code mm, 987mm overall profile width, cover width
Description Rate900mm Unit
Material
216.14 x 4 = 864.55 nos
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
12.64.1 12.66 Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing
Accessories in finish
12.66.1 Precoated/mill 0.71 mm thickness
aluminium ,Alloyplain
Ridges 31500 (IS designation)
(500- 600mm) [Aluminium Alloy
One piece plain ridges
Consider a shed of 20 x 10 meters (External dimensions of plinth)
Length of ridges 20.20 + 5% wastage = 1.01 m Total = 23.11 metre
Material
9532 Precoated/ Mill finish Aluminium plain ridg 564 metre
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1 metre
Say
aluminium ,Alloy 31500
Flashings/ (IS designation)
Aprons (Upto 600 mm)[Aluminium Alloy
Material
9533 Precoated/ Mill finish Aluminium flashing/ 544 metre
9977 Carriage of apron pieces (The apron pieces ar 2.12 L.S.
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1 metre
Say
aluminium ,Alloy
North 31500
light (IS designation) [Aluminium Alloy
curves
Details of north light curves 20.20 metres long complete length
Material
9534 Precoated/ Mill finish Aluminium plain north li 584 metre
9977 Carriage of screws, washers and curves 2.12 L.S.
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20.20 metre
Cost of 1 metre
Say
aluminium ,Alloy
Barge 31500
board (IS designation)
(Upto 200 mm) [Aluminium Alloy
Details of cost for 8.23 metres completed length of barge boards
Material
Length of barge boards = 8.23 metre + Add 5% wastage = 0.41 m Tota
9536 Precoated/ Mill finish Aluminium Barge board 487 metre
1211 Washer for seam bolts 32 100 Nos
9540 EPDM washer 40 100 each
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 8.23 metre
Cost of 1 metre
Say
aluminium ,Alloy
Crimp 31500 (IS designation) [Aluminium Alloy
curve
Material
crimp curve 20.2 metres long complete length and 10.06 metre wide
Area = 20.20 x 1.06 = 21.412 sqm + Add wastage @ 5% = 1.071 sqm
9537 Precoated/ Mill finish Aluminium crimp curve 538 sqm
9977 Carriage of screws, washers and curves 2.12 L.S.
Labour
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 21.412 metre
Cost of 1 metre
Say
aluminium ,Alloy
Crimp 31500
Gutter (IS mm
(600 designation) [Aluminium Alloy
over all girth)
0.63mm thick with zinc coating not less than 275 gm/ sqm
Consider a length of 10.00 m
9538 Precoated/ Mill finish Aluminium gutter 725 metre
9977 Carriage of gutter 2.12 L.S.
1008 Flats up to 10 mm in thickness 4850 quintal
9539 Stainless steel bolt & nuts 10 mm dia and 12 40 each
9977 Carriage of screws, seam bolts & washers 2.12 L.S.
Labour
114 Beldar 645 day
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
13.1.1 13.1 12 mm cement plaster of mix :

13.1.1 1:4 (1 cement: 4 fine sand)
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Scaffolding and sundries 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.2.1 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.2.2 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.4.1 1:4 (1 cement: 4 coarse sand)
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.5.1 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.5.2 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.7.1 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.7.2 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.8.1 13.8 15 mm cement plaster on rough side of single or half brick wall finished with a
13.8.1 1:3floating coat of3neat
(1 cement: fine cement
sand) of mix :
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.8.2 13.8 15 mm cement plaster on rough side of single or half brick wall finished with a
13.8.2 1:4floating coat of4neat
(1 cement: fine cement
sand) of mix :
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.9.1 13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat
13.9.1 12 cement.
mm cement plaster
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.9.2 13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat
13.9.2 20 cement.
mm cement plaster
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.1 13.1 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat
Code of neat cement on the rough side of single Rate
Description or half brick wall.Unit
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.11 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1
Code cement : 5 coarse sand) finished with a topRate
Description layer 6 mm thickUnit
cement plaster 1:6
MATERIAL
Under layer Cement mortar 1 : 5 (1 cement : 5 coarse sand)
Top layer Cement mortar 1 : 6 (1 cement : 6 fine sand)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.12 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1
Code cement : 5 coarse sand) and a top layer 6 mm
Description Ratethick cement Unit
plaster 1:3 (1
MATERIAL
Under layer Cement mortar 1 : 5 (1 cement : 5 coarse sand)
Top layer Cement mortar 1:3 (1 cement : 3 coarse sand)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.13 13.13 12 mm cement plaster 1:2 (1 cement : 2 stone dust).

MATERIAL
Cement mortar 1:2 (1 Cement : 2 stone dust)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.14 13.14 15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of single o
Code half brick wall.
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.15 13.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust).

MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.16.1 1:3 (1 cement : 3 fine sand)
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Extra for removing burrs, cleaning with wire b 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.17 13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of
Code neat cement and thick coat of Lime wash on
Description top of walls when
Rate Unitdry for bearing of
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
776 Satna lime 370 quintal
9999 Indigo gum etc 2.12 L.S.
9999 Sundries ladder etc. 2.12 L.S.
141 White Washer 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.18 13.18 Neat cement punning.

LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.19.1 13.19 Rough cast plaster upto 10 m height above ground level with a mixture of sand
and gravel
13.19.1 Ordinary or crushed
cement finishstone
usingfrom 6 mmcement
ordinary to 10 mm nominal size, dashed over and
MATERIAL
Under layer 12 mm thick cement plaster
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Top layer 10 mm thick cement plaster
114 Beldar 645 Day
101 Bhisti 714 Day
1179 Crushed stone 2.36 mm to 12.5 mm size 900 cum
101 Bhisti 714 Day
777 Dry hydrated lime (factory made) 290 quintal
9977 Carriage of lime 2.12 L.S.
114 Beldar 645 Day
101 Bhisti 714 Day
Labour for scooping
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.2 13.2 Pebble dash plaster upto 10 m height above ground level with a mixture of
Code washed pebble or crushed stone 6 mm to 12.5
Description Ratemm nominal Unit
size, dashed over
MATERIAL
Under layer 12 mm thick cement plaster
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Top layer 10 mm thick cement plaster
114 Beldar 645 Day
101 Bhisti 714 Day
101 Bhisti 714 Day
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.21 13.21 Extra for providing and mixing water proofing material in cement plaster work in
Code proportion recommended by the manufacturers.
Detail of cost for 12mm cement plaster 1:3 (1 cement :3 sand) = 10 sq
Cement required for 10 sqm = 73.89kg.
Water proofing material required @ 1 kg per 50 kg of cement = 1.48 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.48 bags of cement used in the mix.
Cost of 1.00 bag of 50 kg cement used in the mix.
Say
13.22 13.22 Extra for plastering exterior walls of height more than 10 m from ground level for
Code every additional height of 3 m or part thereof.
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.23.1 13.23 Extra for plastering on circular work not exceeding 6 m in radius:
13.23.1 In one coat
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.23.2 13.23 Extra for plastering on circular work not exceeding 6 m in radius:
13.23.2 In two coats
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.24.1 13.24 Extra for plastering done on moulding, cornices or architraves including neat
finish
13.24.1 In oneto line and level:
coat
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.24.2 13.24 Extra for plastering done on moulding, cornices or architraves including neat
finish
13.24.2 In two to line and level:
coats
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.25.1 13.25 Extra for plastering:

13.25.1 Spherical ceiling
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.25.2 Groined ceiling
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.25.3 Flewing soffits
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.26 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered
Code surface to prepare the surface even and smooth
Description Rate complete. Unit
MATERIAL
Plaster of paris 10x0.002x1121 = 22.42kg
Add 2% wastage= 0.45kg
Total = 22.87kg
Say23kg
9977 Carriage of plaster of paris 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.27 13.27 Extra for lining out plaster to imitate stone or concrete blocks walling.
LABOUR
114 Beldar 645 Day
9999 Solution of lime putty 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.28.1 13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine
sand):Band
13.28.1 Flush
Detail of cost for 10 metre long and 10 cm wide band
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre long and 10 cm wide band
Say
sand):Band
13.28.2 Sunk
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
sand): Band
13.28.3 Raised
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
sand): Band
13.28.4 Moulded
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
13.29.1 13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine
sand):Band
13.29.1 Flush
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
sand):Band
13.29.2 Sunk
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
sand): Band
13.29.3 Raised
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
sand): Band
13.29.4 Moulded
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
13.3 13.3 18 mm thick moulded cement mortar band in two coats under layer 12 mm thick
Code with cement mortar 1:5 (1 cement : 5 coarse
Description sand) top layerUnit
Rate 6 mm thick with
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
13.31.1 13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine
sand):/ Ruled/ Struck or weathered pointing
13.31.1 Flush
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Scaffolding and racking out joints including su 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.31.2 13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine
sand): and cut pointing
13.31.2 Raised
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.32.1 13.32 Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand):
13.32.1 Flush/ Ruled/ Struck or weathered pointing
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Scaffolding and racking out joints including s 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.33.1 13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
13.33.1 Flush/ Ruled pointing
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.33.2 13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
13.33.2 Raised and cut pointing
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.34 13.34 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white
Code cement : 3 marble dust).
MATERIAL
White Cement mortar 1:3 (1 white cement : 3 marble dust)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.35.1 13.35 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine sand):
13.35.1 Flush/ Ruled pointing
MATERIAL
Cement mortar 1:2 (1 cement : 2 fine sand)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.36 13.36 Extra for pointing on walls on the outside at height more than 10 m from ground
Code level for every additional height of 3 m or part
Description Ratethere of. Unit
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.37.1 13.37 White washing with lime to give an even shade :

13.37.1 New work (three or more coats)
MATERIAL
775 Dehradun white lime 600 quintal
LABOUR
115 Coolie 645 Day
9999 Sundries ladders etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.38 13.38 Satna lime wash on walls with one coat.

MATERIAL
776 Satna lime 370 quintal
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.39.1 13.39 Colour washing such as green, blue or buff to give an even shade :
13.39.1 New work (two or more coats) with a base coat of white washing with lime
MATERIAL
9999 Add for colouring stuff 2.12 L.S.
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.39.2 13.39 Colour washing such as green, blue or buff to give an even shade :
13.39.2 New work (two or more coats) with a base coat of whiting
MATERIAL
9999 Add for colouring stuff 2.12 L.S.
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.4 13.4 Distempering with dry distemper of approved brand and manufacture (two or
Code more coats) of required shade on new work,
Description over and including
Rate Unit water thinnable
MATERIAL
808 Water thinnable cement primer for interior wal 50 litre
9999 Putty, glue etc 2.12 L.S.
For distempering
815 Dry distemper 30 kilogra
9999 Brushes, sand paper etc 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.41.1 13.41 Distempering with oil bound washable distemper of approved brand and
manufacture
13.41.1 New work (two to or
give an even
more coats)shade :
over and including water thinnable priming coat
Code with cement primer
MATERIAL
9999 Brushes, putty etc 2.12 L.S.
9988 Sundries including Carriage 2.12 L.S.
816 Oil bound washable distemper/ Acrylic distem 40 kilogra
9999 Brushes, sand paper and putty for filling holes 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.42.1 13.42 Distempering with 1st quality acrylic distemper (ready mixed) having VOC
content
13.42.1 Two less than
or more coats50ongms/litre,
new work of approved manufacturer, of required shade and
MATERIAL
9999 Brushes, sand paper and putty for filling holes 2.12 L.S.
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.43.1 13.43 Applying one coat of water thinnable cement primer of approved brand and
manufacture
13.43.1 Water thinnableon cement
wall surface :
primer
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.44.1 13.44 Finishing walls with water proofing cement paint of required shade :
13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)
MATERIAL
851 Water proofing cement paint 38 kilogra
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.45.1 13.45 Finishing walls with textured exterior paint of required shade :
13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including
Code priming coat of exterior primer applied @ 2.20kg/10
Description Rate sqm Unit
MATERIAL
8507 Textured exterior paint 280 litre
809 Exterior primer 140 kilogra
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.46.1 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including
Code priming coat of exterior primer applied @ 2.20
Description Ratekg/10 sqm) Unit
MATERIAL
8505 Acrylic exterior paint 200 litre
809 Exterior Primer 140 Kg
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.47.1 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives
13.47.1 New workof required
(Two shade:
or more coats applied @ 1.43 ltr/10 sqm over and including
Code priming coat of exterior primer applied @ 2.20
Description Ratekg/10 sqm) Unit
MATERIAL
8506 Premium Acrylic exterior paint 210 litre
809 Exterior primer 140 kilogra
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.48.1 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using
Primer
13.48.1 Two or as percoats
more manufacturers
applied onspecifications :
walls @ 1.25 ltr/10 sqm over and including one
Code coat of Special
Description primer applied @ 0.75 ltr /10 sqm
Rate Unit
MATERIAL
8504 Multi surface paint 300 litre
8509 Special Primer (C.W.) 160 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.48.2 Primer
Paintingaswood
per manufacturers specifications
work with Deluxe : Paint of required shade. Two or
Multi Surface
Code more coat applied @ 0.90 ltr/10 sqm over an
Description under coat of primer
Rate Unit applied @0.75
MATERIAL
8509 Special Primer (C.W.) 160 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Primer asSteel
13.48.3 Painting per manufacturers specifications
work with Deluxe : Paint to give an even shade. Two
Multi Surface
Code or more coat applied @ 0.90 ltr/10 sqm overRate
Description an under coat ofUnitprimer applied @
MATERIAL
8510 Metal Primer (U.G.) 105 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.49.1 13.48A Finishing walls with 100% Premium acrylic emulsion paint having VOC less than
50 gm/litre
13.48A.1 New and UV
work (Two resistance
or more coats as per IS@
applied 15489:2004, Alkali
1.43 litre/ 10 sqm.&Over
fungal
andresistance,
including
Code priming coat
Description of exterior primer applied @ 0.90
Ratelitre/10 sqm. Unit
Detail of cost for 10 sqm (Based on item no 13.47)
MATERIAL
836 100% Premium acrylic dirt resistance, Silicone 270 litre
837 Acrylic Exterior Primer 100 litre
LABOUR
131 Painter 714 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.50.1 13.5 Applying priming coat:

13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on
Code wood work (hard and soft wood)
MATERIAL
823 Pink primer (for wood) 105 litre
9999 Putty 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.50.2 With ready mixed aluminium primer of approved brand and manufacture on
Code resinous wood and plywood
MATERIAL
4201 Aluminium primer 120 litre
9999 Putty 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and
Code manufacture on steel galvanised iron/ steelRate
Description works Unit
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Brushes,sand paper including sundries 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and
Code manufacture on steel work (second coat) Rate
Description Unit
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Brushes,sand paper including 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.51.1 13.51 Painting with silicon & acrylic emulsion based water thinnable sealer of
approved
13.51.1 One coat brand and manufacture on wet or patchy portion of plastered
MATERIAL
801 Silicon and acrylic emulsion 120 litre
9999 Putty etc 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.51.2 13.51 Painting with silicon & acrylic emulsion based water thinnable sealer of
approved
13.51.2 Two coatsbrand and manufacture on wet or patchy portion of plastered
MATERIAL
801 Silicon and acrylic emulsion 120 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.52.1 13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and
applied
13.52.1 On steelas per manufacturer's specifications including appropriate priming coat,
work
PRIMING COAT
MATERIAL
9999 Putty 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
EPOXY PAINTING
MATERIAL
7239 Epoxy paint 215 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Putty, brushes, sand paper etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.52.2 13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and
applied
13.52.2 On as per
concrete manufacturer's specifications including appropriate priming coat,
work
PRIMING COAT
MATERIAL
821 Distemper primer 70 litre
9999 Putty 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
EPOXY PAINTING
MATERIAL
7239 Epoxy paint 215 litre
9999 Materials for filling in holes and cracks 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.53.1 13.53 Painting on G.S. sheet with synthetic enamel paint of approved brand and
13.53.1 manufacture
New work (two of or
required colourincluding
more coats) to give an even of
a coat shade :
approved steel primer but
Code excluding
Description a coat of mordant solution Rate Unit
PRIMING COAT
MATERIAL
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
EPOXY PAINTING
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.54.1 13.54 Applying a coat of mordant solution on G.S. sheet:

13.54.1 With a solution of 38 gms of copper acetate in a litre of soft water
MATERIAL
4203 Copper acetate 300 kilogra
9999 Soft Water 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 25 sqm
Cost of 1.00 sqm
Say
13.54.2 13.54 Applying a coat of mordant solution on G.S. sheet:

13.54.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each
Code of copper chloride, copper nitrate and ammonium
Description Rate chloride dissolved
Unit in a litre of
MATERIAL
4204 Hydrochloric acid 35 kilogra
4205 Copper chloride 300 kilogra
4206 Copper nitrate 210 kilogra
4207 Ammonium chloride 22 kilogra
9999 Soft Water 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 25 sqm
Cost of 1.00 sqm
Say
13.55.1 13.55 Painting (two or more coats) on rain water, soil waste and vent pipes and fittings
withmm
13.55.1 100 black anticorrosive
diameter pipes bitumastic paint of approved brand and manufacture,
Detail of cost for 30 mtrs
Area=22/7 x106.4mm x30m =10.032sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
MATERIAL
828 Anticorrosive bituminous paint (black) 100 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Putty, sand paper etc 2.12 L.S.
9999 Wire brushes for cleaning 2.12 L.S.
9999 Extra for delays 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
withmm
diameter pipes bitumastic paint of approved brand and manufacture,
Area=22/7 x0.1572 m x30m =14.82sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
withmm
13.56.1 100 synthetic enamel
diameter pipespaint of approved brand and manufacture and required
Area=22/7x0.1064m x30m =10.032sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
MATERIAL
833 Synthetic enamel paint in black or chocolate 175 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
withmm
Area=22/7 x157.2mm x30m =14.82sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.57.1 13.57 Painting with oil type wood preservative of approved brand and manufacture :
13.57.1 New work (two or more coats)
MATERIAL
859 Oil type wood preservative 130 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Brushes etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.58 13.58 Providing and applying two coats of fire retardant paint on cleaned wood / ply
Code surface @ 3.5 sqm per litre per coat including
Description Ratepreparation of base surface as per
Unit
MATERIAL
7240 Fire retardant paint 240 litre
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.59 13.59 Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per
Code sqm in the first coat and second coat respectively.
MATERIAL
9999 Lime 2.12 L.S.
324 Coal Tar 30 litre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.60.1 13.6 Wall painting with acrylic emulsion paint of approved brand and manufacture to
give or
13.60.1 Two an more
even coats
shadeon: new work
MATERIAL
835 Plastic emulsion paint 200 litre
9999 MATERIAL 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.61.1 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give
an even
13.61.1 Two shade
or more :
coats on new work
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.62.1 13.62 Painting with synthetic enamel paint of approved brand and manufacture of
required
13.62.1 Two colour
or more to give
coats an even
on new workshade : under coat of suitable shade with
over an
Code ordinary
Descriptionpaint of approved brand and manufacture
Rate Unit
MATERIAL
823 Pink primer (for wood) 105 litre
9999 Putty 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
MATERIAL
9977 Carriage of paint and material 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.63.1 13.63 Painting with aluminium paint of approved brand and manufacture to give an
evenor
13.63.1 Two shade
more. coats on new work
MATERIAL
826 Aluminium paint 150 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.64.1 13.64 Painting with acid proof paint of approved brand and manufacture of required
colour
13.64.1 Two or to givecoats
more an even shade
on new :
work
MATERIAL
827 Acid proof paint (chocolate or black) 225 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.65.1 13.65 Painting with black anti-corrosive bitumastic paint of approved brand and
manufacture
13.65.1 Two to giveon
or more coats annew
even shade :
work
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.66.1 13.66 Floor painting with floor enamel paint of approved brand and manufacture of
required
13.66.1 Two colour
or more to give
coats an even
on new workshade :
MATERIAL
831 Floor enamel paint in all shades except green 250 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.67.1 13.67 Varnishing with varnish of approved brand and manufacture :

13.67.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting
Code varnish
MATERIAL
856 Ordinary varnish 100 litre
763 Glue 75 kilogra
857 Superior copal varnish 115 litre
9999 Putty for repair to holes etc 2.12 L.S.
LABOUR
131 Painter 714 Day
(0.36+0.54=0.90)
115 Coolie 645 Day
(0.36+0.54=0.90)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.67.2 13.67 Varnishing with varnish of approved brand and manufacture :

13.67.2 Two or more coats glue sizing with spar varnish or an under coat of flatting
Code varnish
MATERIAL
763 Glue 75 kilogra
858 Superior spar varnish 115 litre
9999 Repair etc 2.12 L.S.
LABOUR
131 Painter 714 Day
(0.36+0.54=0.90)
115 Coolie 645 Day
(0.36+0.54=0.90)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.68.1 13.68 French spirit polishing :

13.68.1 Two or more coats on new works including a coat of wood filler
MATERIAL
1000 Spirit 48 litre
999 Shellac 300 kilogra
9999 White woolen cloth, putty 2.12 L.S.
9999 Sand paper cotton etc 2.12 L.S.
9999 Lineseed oil 2.12 L.S.
LABOUR
131 Painter 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.69.1 13.69 Polishing on wood work with ready mixed wax polish of approved brand and
manufacture :
13.69.1 New work
MATERIAL
855 Wax polish (ready made) 230 kilogra
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Soap, brushes, cloth etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.7 13.7 Floor polishing on masonry or concrete floors with wax polish of approved brand
Code and manufacture.
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Acetic acid soap, cloth etc 2.12 L.S.
9988 Sundries including Carriage 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.71 13.71 Lettering with black Japan paint of approved brand and manufacture
Detail of cost for 100 letters of 15 cm height
MATERIAL
829 Black Japan paint 90 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Painting brushes, turpentine, stencil etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 letters of 15 cm height
Say
13.72 13.72 Washed stone grit plaster on exterior walls height upto 10 metre above ground
Code level, in two layers, under layer 12 mm cement
Description Rateplaster 1:4 (1Unit
cement : 4 coarse
MATERIAL
Under layer 12 mm cement plaster with Cement mortar 1 : 4 (1 cement
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Applying cement slurry
114 Beldar 645 Day
Top layer 15 mm thick stone chipping plaster
Quantity required = 0.172 cum including wastage
Preparation of cement concrete mix 1:1/2:2 (1 cement : 1/2 coarse san
2911 Stone chippings/ screenings 10/ 11.2 mm nomi 1200 cum
114 Beldar 645 Day
101 Bhisti 714 Day
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Labour for washing
115 Coolie 645 Day
9999 Sundries soft brushes etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.73.1 13.73 Forming groove of uniform size in the top layer of washed stone grit plaster as
permm
13.73.1 15 approved
wide andpattern
15 mmusing
deepwooden
groovebattens, nailed to the under layer, including
Second class kail wood in plank 30 x0.015 x0.015m =6.75cudm
Wastage @ 10% = 0.68
Total = 7.43 cudm
Assuming that the battens shall become unserviceable after using 5 ti
Cost for using once = 7.43 / 5 = 1.48 cudm
MATERIAL
1198 Second class kail wood in planks 260 10 cudm
9977 Carriage of wood 2.12 L.S.
Labour for making battens
114 Beldar 645 Day
Labour for nailing the battens to under layer and finishing and repairin
114 Beldar 645 Day
9999 Nails and cement mortar 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.73.2 13.73 Forming groove of uniform size in the top layer of washed stone grit plaster as
permm
13.73.2 20 approved
wide andpattern
15 mmusing
deepwooden
groovebattens, nailed to the under layer, including
Second class kail wood in plank 30 x0.02 x0.015m =9.00 cudm
Wastage @ 10% = 0.90
Total = 9.90 cudm
Assuming that the battens shall become unserviceable after using 5 ti
Cost for using once = 9.9 / 5 = 1.98 cudm
MATERIAL
1198 Second class kail wood in planks 260 10 cudm
9977 Carriage of wood 2.12 L.S.
Labour for making battens
114 Beldar 645 Day
Labour for nailing the battens to under layer and finishing and repairin
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.74 13.74 Extra for washed grit plaster on exterior walls of height more than 10 m from
Code ground level for every additional height of 3
Description m or part thereof.
Rate Unit
MATERIAL
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.75 13.75 Extra for washed stone grit plaster on circular work not exceeding 6 m in radius
Code (in two coats).
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.76 13.76 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top
Code layer of washed stone grit plastered surface
Description as per approved
Rate pattern, including
Unit
Aluminium channel section 15 x 15 x 2 mm (weight 0.221 kg/mtr)
Qty = 30 + 5% wastage = 31.5 m @ 0.221
kg/m = 6.96 kg.
7306 Aluminium T or L sections 190 kilogra
9977 Carriage of timber 2.12 L.S.
Labour for fixing
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.77 13.77 Extra for using white cement in place of ordinary cement in the top layer of the
Code item of washed stone grit plaster.
MATERIAL
Add for
Deduct for ordinary cement
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.78 13.78 Providing and applying 12 mm thick (average) premixed formulated one coat
Code gypsum lightweight plaster having additives
Description and light weight
Rate aggregates as
Unit
MATERIAL
Premixed super white gypsum plaster @ 16.14kg /sqm = 61.40 + 5% w
868 Premixed super white gypsum plaster. 6 kg
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.79 13.79 Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective
Code diameter 10-40 microns and specific gravity
Description of 1.34 to 1.40 in
Rate cement
Unit
Detail of cost for per bag of 50 kg of cement used in mortar
MATERIAL
8733 Synthetic ployster triangular fibre of length 6 410 kg
including labour for mixing
TOTAL
TOTAL
TOTAL
TOTAL
Cost per bag of cement
Say
13.8 13.8 Providing and applying white cement based putty of average thickness 1 mm, of
Code approved brand and manufacturer, over theRate
Description plastered wall surface
Unit to prepare the
MATERIAL
824 White cement based putty 13 kg
10x0.001x1429 = 14.29kg
Add 2% wastage= 0.29kg
Total = 14.58kg Say 14.58 kg
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.81.1 13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic
Compound
13.81.1 One coat ) content less than 50 grams/ litre, of approved brand and
MATERIAL
802 Acrylic distemper 1st quality , having VOC co 40 Kg
9999 Brushes, putty etc. 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.81.2 13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic
Compound
13.81.2 Two coats ) content less than 50 grams/ litre, of approved brand and
MATERIAL
802 Acrylic distemper 1st quality , having VOC co 40 Kg
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.82.1 13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound
13.82.1 One coat ) content less than 50 grams/ litre, of approved brand and
MATERIAL
803 Acrylic emulsion , having VOC content less th 94 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Brushes, sand paper etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.82.2 13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound
13.82.2 Two coats ) content less than 50 grams/ litre, of approved brand and
MATERIAL
803 Acrylic emulsion , having VOC content less th 94 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.83.1 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile
13.83.1 One coatOrganic Compound ) content less than 50 grams/ litre of approved
MATERIAL
804 Premium acrylic emulsion of interior grade, h 200 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.83.2 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile
13.83.2 Two coatsOrganic Compound ) content less than 50 grams/ litre of approved
MATERIAL
804 Premium acrylic emulsion of interior grade, h 200 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.84.1 13.85 Applying priming coats with primer of approved brand and manufacture, having
13.85.1 low
WithVOC
ready(Volatile
mixed Organic Compound
pink or grey primer on) content.
wood work (hard and soft wood) having
Code VOC content
Description less than 50 grams/ litre Rate Unit
MATERIAL
806 Ready mixed pink or grey primer on wood work 105 litre
9999 Putty 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.84.2 13.85 Applying priming coats with primer of approved brand and manufacture, having
13.85.3 low
WithVOC
water (Volatile Organic
thinnable Compound
cement primer on) wall
content.
surface having VOC content less
Code than 50 grams/litre
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.85 13.86 6 mm plaster on cement concrete or reinforced cement concrete work with white
Code cement based polymer modified self curingRate
Description mortar of approved
Unit make as per the
MATERIAL
772 White cement based polymer modified self cu 15 kg
i/c 2% wastage
9977 Carriage of white cement based polymer modi 2.12 L.S.
LABOUR
155 Mason (average) 749 day
115 Coolie 645 Day
9999 Scaffolding and sunderies 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say

13.87.1 Old work (two or more coats)
MATERIAL
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say

13.87.2 Old work (one or more coats)
MATERIAL
LABOUR
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.87 13.88 Removing white or colour wash by scrapping and sand papering and preparing
Code the surface smooth including necessary repairs
Description Rate to scratches etc. complete
Unit
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Sundries such as sand paper and scrapper 2.12 L.S.
9999 Repair to scraches 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.88 13.89 Distempering with dry distemper of approved brand and manufacture (one or
Code more coats) and of required shade on old work
Description Rate to give an even
Unit shade.
MATERIAL
815 Dry distemper 30 kilogra
9977 Carriage of distemper 2.12 L.S.
9999 Brushes, sand-paper etc. 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.89.1 13.9 Distempering with 1st quality acrylic distember (Ready mix) having VOC content
lesswork
13.90.1 Old than (one
50 grams/ litrecoats)
or more of approved brand and manufacture to give an even
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.9 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like
by scrapping, sand papering and preparing the surface smooth including
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Scrapper, sand paper etc. 2.12 L.S.
9999 Sundries including mortar to repair the surfac 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.91.1 13.92 Painting on G.S. sheet with synthetic enamel paint of approved brand and
manufacture
13.92.1 Old work (oneoforrequired colour to give an even shade :
more coats)
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Putty, brushes sand paper etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
13.92.1 13.93 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint of approved brand and manufacture
13.93.1 75 mm diameter pipes
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
13.93.1 13.94 Painting (one or more coats) on rain water, soil waste and vent pipes and fittings
with
13.94.1 75 mmblack anticorrosive
diameter pipes bitumastic paint of approved brand and manufacture on
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
withmm
Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Putty, sand paper brushes etc. 2.12 L.S.
9999 Extra for delay 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 m
Cost of 1.00 m
Say
withmm
Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 m
Cost of 1.00 m
Say
with
13.95.1 75 mmaluminium
diameterpaint
pipesof approved brand and manufacture over a priming coat of
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
withmm
13.95.2 100 aluminium
diameter paint of approved brand and manufacture over a priming coat of
pipes
Area=22/7 x106.4x30m =10.032sqm
MATERIAL
LABOUR
131 Painter 714 Day
0.18 x 10.032 / 7.67 = 0.24
115 Coolie 645 Day
MATERIAL
0.61 x 10.032 / 7.67 = 0.80
LABOUR
131 Painter 714 Day
0.41 x 10.032 / 7.67 = 0.54
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
withmm
13.95.3 150 aluminium
diameter paint of approved brand and manufacture over a priming coat of
pipes
Area=22/7 x157.12x30m =14.82 sqm
MATERIAL
LABOUR
131 Painter 714 Day
0.18 x 14.82 / 7.67 = 0.36
115 Coolie 645 Day
MATERIAL
0.61 x 14.82 / 7.67 = 1.72
LABOUR
131 Painter 714 Day
0.41 x 14.82 / 7.67 = 0.80
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
with
13.96.1 75 mmsynthetic
diameterenamel
pipes paint of approved brand and manufacture and required
Area = 22/7x0.0814 mmx30 m = 7.67 sqm
MATERIAL
9999 Putty, sand paper etc. 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 m
Cost of 1.00 m
Say
withmm
Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 m
Cost of 1.00 m
Say
withmm
Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 m
Cost of 1.00 m
Say
13.96.1 13.97 Painting with oil type wood preservative of approved brand and manufacture:
13.97.1 Old work (one or more coats)
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.97.1 13.98 Wall painting with plastic emulsion paint of approved brand and manufacture to
give or
13.98.1 One an more
even coats
shade:on old work
MATERIAL
835 Plastic emulsion paint 200 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.98.1 13.99 Painting with synthetic enamel paint of approved brand and manufacture of
required
13.99.1 One or morecolour to give
coats an work
on old even shade :
MATERIAL
9977 Carriage of paint and materials 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Putty 2.12 L.S.
9999 Brushes sand paper etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.99.1 13.1 Painting with aluminium paint of approved brand and manufacture to give an
evenor
13.100.1 One shade:
more coats on old work
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.100.1 13.101 Painting with acid proof paint of approved brand and manufacture of required
colour
13.101.1 One or to givecoats
more an even shade
on old work:
MATERIAL
827 Acid proof paint (chocolate or black) 225 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.101.1 13.102 Painting with black anti-corrosive bitumastic paint of approved brand and
manufacture
13.102.1 One to giveon
or more coats anold
even shade :
work
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.102.1 13.103 French spirit polishing :

13.103.1 One or more coats on old work
MATERIAL
1000 Spirit 48 litre
999 Shellac 300 kilogra
9999 Turpentine oil sand paper cotton/woolen cloth 2.12 L.S.
9999 Linseed oil 2.12 L.S.
LABOUR
131 Painter 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.103.1 13.104 Polishing on wood work with ready made wax polish of approved brand and
manufacture
13.104.1 Old work :
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
9999 Soap, brushes, cloth etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.104 13.105 Re-lettering with black Japan paint of approved brand and manufacture.
Detail of cost for 100 letters of 15 cm height
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
13.105 13.106 Painting (one or more coats) with black Japan paint of approved brand and
Code manufacture to give an even shade.
MATERIAL
9999 Putty etc. 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.106.1 13.107 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash
basin:
13.107.1 32 mm dia
Detail of cost for one no.
MATERIAL
1314 C.P.brass chain with 32 mm dia rubber plug 40 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
13.106.2 13.107 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash
basin:
13.107.2 40 mm dia
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
13.107.1 13.108 Distempering with 1st quality acrylic distemper (ready made) having VOC
content
13.108.1 One less than
or more coats50ongm
oldper ltr. of approved manufacturer and of required shade
work
MATERIAL
9988 Sundries including carriage of material 2.12 L.S.
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.109.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of
Code primer applied @ 0.80 litrs/10 sqm complete
Description including cost Unit
Rate of Priming coat.
MATERIAL
8508 Primer for cement paint 90 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.109.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete.
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.110.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28
Code ltr/10 sqm.
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.110.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm.
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint
Code surface
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm).
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.112.1 additives of required
Old work (Two shade
or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement
Code paint surface
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
additives
13.112.2 Old of required
work (one or moreshade
coats applied @ 0.83 ltr/10 sqm).
MATERIAL
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.112.1 13.113 Varnishing with varnish of approved brand and manufacture:

13.113.1 One or more coats with copal varnish
MATERIAL
857 Superior copal varnish 115 litre
9999 Repair to the surface 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.112.2 13.113 Varnishing with varnish of approved brand and manufacture:

13.113.2 One or more coats with spar varnish
MATERIAL
858 Superior spar varnish 115 litre
9999 Repair etc 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.113 13.114 Melamine polishing on wood work (one or more coat).

MATERIAL
7241 Melamine polish 300 litre
6 Hire charges of Spraying machine including el 250 Day
9988 Carriage charge of Machine & Marerial 2.12 L.S.
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.114 13.115 Varnishing with flatting varnish of approved brand and manufacture one or more
Code coats on old work.
MATERIAL
9999 Glue, putty etc 2.12 L.S.
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.115 13.116 Polishing in high gloss/matt finish melamine clear polish on wood work in
Code required color/wooden shade texture with following
Description Rate processUnit
in the sequence as
MATERIALS :
7241 Melamine polish 300 litre
9805 Melamine wood sealer 190 litre
9806 Melamine solvent/thinner 120 litre
9807 Sanding cloth 150 mm wide 60 metre
9808 Sandpapers of assorted gratings 22 Nos
9809 Melamine wood filler putty 120 kg
9810 Dhoti (worn out soft cotton cloth) 25 Nos
LABOUR :
181 Polisher 1st class 784 day
182 Polisher 2nd class 714 day
114 Beldar 645 day
6 Hire charges of Spraying machine including el 250 day
9999 Sundries including scaffolding and T&P etc 2.12 L.S.
MACHINERY :
97 Grinding buffers 250 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
14.1.1 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters

and under,
14.1.1 With cement including cutting
mortar 1:4 the patch
(1 cement in proper
: 4 fine sand) shape, raking out joints and
MATERIAL
LABOUR
115 Coolie 645 Day
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.1.2 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters

and under,
14.1.2 With cement including cutting
mortar 1:4 the patch
(1cement: in proper
4 coarse sand)shape, raking out joints and
MATERIAL
LABOUR
115 Coolie 645 Day
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.2.1 14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors
or walls
14.2.1 Door cutting masonry for holdfasts, embedding hold fasts in cement concrete
chowkhats
Detail of cost for 1 each
114 Beldar 645 Day
115 Coolie 645 Day
130 Mistry 784 Day
128 Mate 714 Day
9999 Cement concrete 1:2:4 filled in chase cut 2.12 L.S.
9999 Painting two coats of coaltar 2.12 L.S.
9999 Disposal of mulba 2.12 L.S.
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 chowkhat
Say
or walls cutting
14.2.2 Window chowkhatsmasonry for holdfasts, embedding hold fasts in cement concrete
114 Beldar 645 Day
115 Coolie 645 Day
130 Mistry 784 Day
128 Mate 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
or walls cutting
14.2.3 Clerestory window masonry for holdfasts, embedding hold fasts in cement concrete
chowkhats
114 Beldar 645 Day
115 Coolie 645 Day
130 Mistry 784 Day
128 Mate 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
14.3 14.3 Fixing chowkhat in existing opening in brick/ RCC wall with dash
Code fasteners/Chemical fasteners of appropriate
Description size (3 nos on each
Rate Unit vertical member
Details of cost for 1 chowkhat.
114 Beldar 645 Day
115 Coolie 645 Day
130 Mistry 784 Day
128 Mate 714 Day
7019 Dash fastner/ chemical fastener 12.5 each
9999 Hire charges of drill machine hire charges, Sc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Say
14.4.1 14.4 Making the opening in brick masonry including dismantling in floor or walls by
14.4.1 Forcutting masonry
door/ window/ and making good
clerestory windowthe damages to walls, flooring and jambs
Details of cost for one opening of size 0.90x2.10m = 1.89 sqm
Cement mortar 1:6 (1 cement: 6 fine sand)
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.89sqm.
Cost of 1.00 sqm.
Say
14.5.1 14.5 Renewing glass panes, with putty and nails wherever necessary including
racking
14.5.1 Float out panes
glass the oldofputty:
nominal thickness 4 mm (weight not less than 10kg/sqm)
Detail of cost for 10 glasses area each 0.1sqm.
MATERIAL
1.00 sqm + 10% wastage= 1.10 Sqm
9988 Carriage including sundries 2.12 L.S.
863 Putty for wood work 28 kilogra
9999 Painting or varnishing or beewaxing 2.12 L.S.
9999 Sundries Nails etc. 2.12 L.S.
119 Glazier 714 Day
114 Beldar 645 Day
9999 Sundries such as Rag, cotton etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm
Say
14.5.2 14.5 Renewing glass panes, with putty and nails wherever necessary including
racking
14.5.2 Float out panes
glass the oldofputty:
nominal thickness 5 mm (weight not less than 12.5kg/sqm)
MATERIAL
9988 Carriage including sundries 2.12 L.S.
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm
Say
14.6.1 14.6 Renewing glass panes, with wooden fillets wherever necessary:
14.6.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
MATERIAL
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm
Say
14.6.2 14.6 Renewing glass panes, with wooden fillets wherever necessary:
14.6.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)
MATERIAL
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm
Say
14.7.1 14.7 Renewing glass panes and refixing existing wooden fillets:
14.7.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
MATERIAL
9977 Carriage of glasspanes and other materials 2.12 L.S.
9999 Methylated spirit 2.12 L.S.
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm
Say
14.7.2 14.7 Renewing glass panes and refixing existing wooden fillets:
14.7.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)
MATERIAL
9977 Carriage of glasspanes and other materials 2.12 L.S.
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm
Say
14.8.1 14.8 Supplying and fixing new wooden fillets wherever necessary:
14.8.1 2nd class teak wood fillets
Details of cost for 10 metres length
MATERIAL
10.00x0.01x0.01 = 1.00 cudm

Add 15% wastage = 0.15 cudm
Total = 1.15 cudm
9999 Nails 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
14.8.2 14.8 Supplying and fixing new wooden fillets wherever necessary:
14.8.2 Hollock wood fillets
MATERIAL
10.00x0.01x0.01 = 1.00 cudm

Add 15% wastage = 0.15 cudm
Total = 1.15 cudm
9999 Nails 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
14.9 14.9 Renewal of old putty of glass panes (length)

MATERIAL
9999 Nails 2.12 L.S.
9999 Spirit 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
14.1 14.1 Refixing old glass panes with putty and nails
9999 Spirit 2.12 L.S.
9999 Nails 2.12 L.S.
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm
Say
14.11 14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets)
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
9999 Nails 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm
Say
14.12 14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in
Code existing R.C.C. slab, including cutting chase,
Description anchoring clamp
Rate Unitto reinforcement
Details of cost for each fan clamp.
MATERIAL
M.S.bar 16mm dia = 40cm (including

wastage) @ 1.58 kg/m = 0.632 kg
9999 Cement concrete 1:2:4 (1 Cement : 2 Coarse s 2.12 L.S.
9999 Painting two or more coats to exposed portion 2.12 L.S.
Labour for fixing
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
14.13 14.13 Regrading terracing of mud phaska covered with tiles or brick, in cement mortar
Code by dismantling tiles or bricks, removing mud
Description plaster, preparing
Rate Unit the surface of
(i) Dismantling tiles/bricks in cement mortar including removing mud pla
LABOUR
114 Beldar 645 Day
(ii) Preparing the surface, for mud phuska to proper slope, relaying mud
25mm thick mud plaster including gobri leaping
MATERIAL
Mud mortar
Gobri mortar
LABOUR
114 Beldar 645 Day
(iii) relaying tiles/bricks (Rate as per item No

3.3)
including Cement mortar 1:3 (1 Cement : 3
3.3 fine sand) for grouting 4382.15 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.14.1 14.14 Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1 cement : 4
coarse
14.14.1 Red/ sand),
white sandincluding necessary
stone slabs repairs
30 to 50 and cement pointing with same mortar
mm thick
Dismantling existing stone, slabs roofing 1x10 sqmx0.05m = 0.50 cum.
114 Beldar 645 Day
115 Coolie 645 Day
9999 Cleaning the surface including necessary repa 2.12 L.S.
1174 Red sand stone slab 45 mm and 50 mm thick 260 sqm
115 Coolie 645 Day
101 Bhisti 714 Day
2264 Carriage of Rubbish 163.93 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.15.1 14.15 Renewing wooden battens in roofs, including making good the holes in wall and
painting
14.15.1 Sal woodwith oil type wood preservative of approved brand and manufacture
battens
Details of cost for 10 battens i.e. 300 cudm
3 metres long of 100x100mm
10x3x0.1x0.1 = 0.3cum =300cudm
Add wastage @ 2%= 6 cudm, Total = 306 cudm
MATERIAL
LABOUR
Taking out the existing battens and refixing new one including supporti
114 Beldar 645 Day
9999 Making good the holes including sundries 2.12 L.S.
131 Painter 714 Day
115 Coolie 645 Day
9999 Brushes 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
14.16.1.1 14.16 Renewing wooden beams in roofs including making good the holes in walls and
painting
14.16.1 Not with oil4.00
exceeding type wood in
metres preservative
length. of approved brand and manufacture
14.16.1.1Sal wood beams
Consider one beam i.e. 300 cudm.
0.25 x 0.30m x 4.0m (long) = 0.30 cum
Add wastage @ 2% (0.006 cum) = 0.306 cum =306 cudm
(i) Propping the roof
MATERIAL
100mm diameter ballies 4m long 10 nos.
100x100mm salwood battens 1.0 metre long 5 nos.x1.0x0.1x0.1 =0.0
These materials can be used for 16 times
Hence qty for one operation 1/16 = 3.125 cudm
LABOUR
114 Beldar 645 Day
(ii) Taking out the existing beams etc.
LABOUR
114 Beldar 645 Day
(iii) Renewal
Materials and Labour
114 Beldar 645 Day
Painting with oil preservative
(4x1.1) +( 2.0x0.25x0.30) =4.4 + 0.15 = 4.55 sqm
131 Painter 714 Day
115 Coolie 645 Day
9999 Making good the holes 2.12 L.S.
302 Safeda ballies 125 mm diameter 40 metre
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
painting
14.16.1 Not with oil4.00
exceeding type wood in
metres preservative
length. of approved brand and manufacture
14.16.1.2Hollock wood beams
Consider one beam i
0.25 x 0.30m x 4.0m (long) = 0.30 cum
Add wastage @ 2% (0.006 cum) = 0.306 cum =306cudm
(I) Propping the roof
MATERIAL
100mm diameter ballies 4m long 10 nos.
100x100mm salwood battens 1.0metre long 5 nos.x1.0x0.1x0.1 =0.05
These materials can be used for 16 times hence qty for one operation
LABOUR
114 Beldar 645 Day
LABOUR
114 Beldar 645 Day
(iii) Renewal
114 Beldar 645 Day
(4x1.1) + (2.0x0.25x0.30) =4.4 + 0.15 = 4.55 sqm
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
painting
14.16.2 Above with
4.00 oil type
metres wood
and uptopreservative
5.00 metres of approved brand and manufacture
length.
14.16.2.1Sal wood beams
0.25 x 0.30m x 5.0m (long) = 0.375 cum
Add wastage @ 2% (0.008 cum) = 0.383 cum = 383cudm
MATERIAL
125mm diameter ballies 5m long 12 nos
100x100mm salwood battens 1.0 metre long 6 nos. x1.0x0.1x0.1 = 60
LABOUR
114 Beldar 645 Day
LABOUR
114 Beldar 645 Day
(iii) Renewal
114 Beldar 645 Day
(2x5x0.25)+3.0 + 2.0x0.25x0.30 = 5.5 + 0.15 = 5.65 sqm
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 375 Cudm
Cost of 1.00 cum
Say
painting
14.16.2 Above with
4.00 oil type
metres wood
and uptopreservative
5.00 metres of approved brand and manufacture
length.
14.16.2.2Hollock wood beams
0.25 x 0.30m x 5.0m (long) = 0.375 cum
Add wastage @ 2% (0.008 cum) = 0.383 cum = 383cudm
MATERIAL
125mm diameter ballies 5m long 12 nos
100x100mm salwood battens 1.0 metre long 6 nos. x1.0x0.1x0.1 = 60
LABOUR
114 Beldar 645 Day
LABOUR
114 Beldar 645 Day
(iii) Renewal
114 Beldar 645 Day
(2x5x0.25)+3.0 + 2.0x0.25x0.30 = 5.5 + 0.15 = 5.65 sqm
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 375 Cudm
Cost of 1.00 cum
Say
14.17 14.17 Raking out joints in lime or cement mortar and preparing the surface for re-
Code pointing or replastering, including disposalRate
Description of rubbish to the dumping ground, al
Unit
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.18.1 14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of
integral
14.18.1 With water
F.P.S. proofing
brick tiles compound by weight of cement for flat tile bricks on top
MATERIAL
2% of wt. of cement
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.18.2 14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of
integral
14.18.2 With water brick
modular proofing
tilescompound by weight of cement for flat tile bricks on top
MATERIAL
2% of wt. of cement
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
14.19 14.19 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and
Code removing materials to any distance within compound
Description Rate and stacking.
Unit
Details of cost for 30 mtrs of weight 63 kgs
M.S. Flats 40x6mm @ 1.9kg./m = 30x1.9 = 57 kg. (A)
J' hook bolts @ 30cm centre to centre
= 101 Nos. x 0.15 m = 15.15 m @ 0.40kg./ m = 6.06kg (B)
Total (A+B) = 63.06 kg Say 63 kg
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 63 kg.
Cost of 1.00 kg
Say
14.2 14.2 Fixing of old wind tie with new fittings including painting two or more coats with
Code anticorrosive bitumastic paint of approvedRate
Description brand & manufacturer
Unit over and
Detail of cost for 20.2 m wind tie
MATERIAL
@ 30 cm center to center = 68 Nos
9977 Carriage of bolts, nuts and washers etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
Applying priming coat with ready mixed zink chromate yellow primer
20.2x2x(0.04+0.006) = 1.86 sqm
Painting with ready mixed black antcorrosive bitumastic paint
13.65.1 Rate as per item No.13.65.1 SH: Finishing 115.1 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 metre
Say
14.21 14.21 Renewing bottom rail and/or top runner of collapsible gate including making
Code good all damages and applying priming coat
Description of zinc chromate
Rate Unityellow primer of
Detail of cost for gate of size 1.52x2.4 m (weight 11.55 kg)
MATERIAL
M.S. Tee 40x40x6 mm
Top rail = 1.725 m
Bottom rail = 1.570 m
Total = 3.295 m say 3.30 m @ 3.5 kg/m = 11.55 kg
Add 10% wastage = 1.155 kg
Total = 12.705 kg = 0.1270 q say 0.13 q
Taking out collapsible gate including frame
15.12.2 (Rate as per item no 15.12.2 of SH Dismantli 414.55 each
Refixing of collapsible gate including mending good the demaged floor,
Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone ag
3.6 Cement mortar 1 : 6 (1 cement : 6 fine sand) 3044.3 cum
Priming coat on Tees 0.16x3.3 = 0.53 sqm
LABOUR
Labour for fixing the gate
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 11.55 kg
Cost of 1.00 kg
Say
14.22.1 14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting
and fixing
14.22.1 Wheel the dia
50 mm same with
and necessary clamps, nuts and bolts/welding and erection
below
Detail of cost for 10 nos wheels of 40 mm dia.
MATERIAL
Weight of 10 nos wheels
10x[3.14x{(4/2)x(4/2)}x4]x7.850/1000 = 3.94 kg
Weight of 10 nos clamps 6 mm thick =10x lenth of clamp =10x0.17m @
Weight of 10 nos 10 mm dia. Bolts, 10 cm long 10x0.10m = 1m @ 0.60
Total = 7.70 kg say 8 kg
Labour for dismantling :
114 Beldar 645 Day
Renewing the wheels with clamps :-
MATERIAL
7442 Wheel 75 mm dia. 40 mm wide 62 each
10 nos clamps out of M.S. flat 40x6 mm, 170 mm long = 10x0.17m = 1
Total = 3.39 kg say 3.50 kg
M.S. bolt/pin 10 mm dia 10 cm long 10 Nos

10x0.06 = 0.6 kg = 0.006 q
length = 10x(2x4) = 80cm
LABOUR
Labour for cutting, assembling and errection charges
114 Beldar 645 Day
Priming coat : = 10x2(0.06+0.008)x0.25m = 0.34 sqmon Tees 0.16x3.3
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos wheels
Say
14.22.2 14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting
and fixing
14.22.2 Wheel abovethe50
same
mm with
dia necessary clamps, nuts and bolts/welding and erection
Detail of cost for 10 nos wheels
Considering average wheel dia =75 mm
Width of wheel = 40 mm
M.S. flat for clamp = 60x8 mm
Bolt size 16 mm dia.
Lenth of one clamp :
2x(0.04+0.0375+0.02)+0.05 =0.195+0.05=0.245m say 0.25m
MATERIAL
Weight of 10 nos wheels
10x[3.14x{(7.5/2)x(7.5/2)}x4]x7.850/1000 = 13.87 kg
Weight of 10 nos clamps 8 mm thick =10x0.25 m @ 3.8kg/m = 9.50 kg
Weight of 10 nos 16 mm dia. Bolts, 10 cm long 10x0.10 m @ 1.60 kg/m
Labour for dismantling :
114 Beldar 645 Day
Renewing the wheels with clamps :-
MATERIAL
7442 Wheel 75 mm dia. 40 mm wide 62 each
10 nos clamps out of M.S. flat 60x8 mm = 10x0.25 m @ 3.8 kg/m = 9.5
M.S. bolt/pin 16 mm dia 10 cm long 10 Nos

10x0.16= 1.6 kg = 0.016 q
length = 10x(2x6)
LABOUR
Labour for cutting, assembling and errection charges
114 Beldar 645 Day
Priming coat : = 10x2(0.06+0.008)x0.25m = 0.34 sqmon Tees 0.16x3.3
TOTAL
TOTAL
TOTAL
TOTAL
Say
14.23 14.23 Pumping out water caused by springs, tidal or river seepage, broken water mains
Code or drains and the like.
Details for 10.91 Kiloletre
Pumping hours 3 hrs. or 0.375 days
114 Beldar 645 Day
for clearing slush
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.91 Kiloletre
Cost of 1 Kiloletre
Say
14.24 14.24 Mud mortar made with local clay good earth.
Detail of cost for one cum
MATERIAL
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
Cost of one cum
Say
14.25 14.25 Brick work with common burnt clay bricks of class designation 7.5 in mud morta
MATERIAL
Mud mortar
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 Cum.
Say
14.26.1.1Superior class teak wood including nickel plated bright finished M.S. piano
Code hinges with necessary screws.
MATERIAL
Styles-
4x200x8.0x2.5cm = 0.016 cum+
Rails-
Top rail-
1x110.5x8.0x2.5cm = 0.0022cum+
2x110.5x8.0x2.5 cm = 0.0044 cum
Panels-
2x48x41x1.6cm = 0.006cum+
Sash bars-
2x114x3.8x2.5cm = 0.0022cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-
16x92x1.4x1.2cm = 0.002cum
Total = 0.0358
Grand Total = 0.0394 cum = 39.40 cudm say 39 cudm
1186 Superior class teak wood such as Dandeli, Ba 1100 10 cudm
Fittings-
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
14.26.1.2Ist class teak wood including nickel plated bright finished M.S. piano hinges with
Code necessary screws.
MATERIAL
Styles-
4x200x8.0x2.5cm = 0.016 cum+
Rails-
Top rail-
1x110.5x8.0x2.5cm = 0.0022cum+
2x110.5x8.0x2.5cm = 0.0044 cum.
Panels-
2x48x41x1.6cm = 0.006cum+
Sash bars-
2x114x3.8x2.5cm = 0.022cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-
16x92x1.4x1.2cm = 0.002cum
Total = 0.0358
Grand Total = 0.0394 cum = 39.40 cudm say 39 cudm
1188 First class teak wood in planks 850 10 cudm
Fittings-
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
14.26.2.1Superior class teak wood including nickel plated bright finished M.S. piano
Code hinges with necessary screws.
MATERIAL
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
2x110.5x9.5x2.5 cm = 0.005 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.038 cum.
1186 Superior class teak wood such as Dandeli, Ba 1100 10 cudm
75x45x3.2 mm
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
14.26.2.2Ist class teak wood including nickel plated bright finished M.S. piano hinges with
Code necessary screws.
MATERIAL
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
2x110.5x9.5x2.5 cm = 0.005 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.038 cum.
1188 First class teak wood in planks 850 10 cudm
75x45x3.2 mm
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
14.27.1 14.27 Providing and fixing plain jaffri door and window shutters including bright or/and
black enamelled
14.27.1 Second class teakM.S.
wood butt hinges with necessary screws 35x10 mm laths placed
Details of cost of a jaffri shutter 176x86 cm = 1.51 sqm
MATERIAL
Teak wood 2nd class
Styles 2x176x7.5x3.5 cm = 0.0092 cum
Rails 3x86x7.5x3.5 = 0.0068 cum
Total 0.0160 cum
Add wastage @ 10 % =0.0016 cum
Total = 0.0176 cum Say 18 cudm
Palain Jaffri work
9.41.1 Rate as per Item Number 9.41.1 of SH:Wood 2622.2 sqm
LABOUR
(For making frame and fixing fitting)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.51 sqm.
Cost of 1 sqm.
Say
14.28.1 14.28 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass
14.28.1 20brackets fixed with brass screws and wooden plugs etc. wherever necessary
mm diameter.
Detail of cost for 2 m long
MATERIAL
444 Brass curtain rod 20 mm dia 1.25 mm thick 140 metre
446 Brass brackets (curtain rods) 20 mm 45 each
9999 Screws 2.12 L.S.
Wooden plugs including cutting brick work and fixing in cement mortar
9999 LABOUR 2.12 L.S.
TOTAL
Add 1 % for water charges on all except (A) i.e. on (459.2 - 71) = 388.
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (585.25 - 71) = 514.
Cost of 2 m
Cost of 1 m
Say
14.28.2 14.28 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass
14.28.2 25brackets fixed with brass screws and wooden plugs etc. wherever necessary
mm diameter.
Detail of cost for 2 m long
MATERIAL
445 Brass curtain rod 25 mm dia 1.25 mm thick 190 metre
446 Brass brackets (curtain rods) 20 mm 45 each
9999 Screws 2.12 L.S.
Wooden plugs including cutting brick work and fixing in cement mortar
9999 LABOUR 2.12 L.S.
TOTAL
Add 1 % for water charges on all except (A) i.e. on (559.2 - 71) = 488.
TOTAL
TOTAL
TOTAL
Cost of 2 m
Cost of 1 m
Say
14.29 14.29 Providing and fixing M.S. round or square bars with M.S. flats at required spacing
Code in wooden frames of windows and clerestory
Description windows.
Rate Unit
Details of cost for window -140x110cm
MATERIAL
M.S. bar 16 mm dia 13x136 cm = 17.68 m @ 1.57 kg/m = 27.93 kg
Add for wastage @ 10% =2.79 kg
Total = 30.72 kg or 0.307 q
M.S. flat 40x6mm 2x96cm = 192cm+
1x110cm = 110cm
= 302cm+
Add wastage @ 10% = 30cm
Total = 332cm.@ 1.90 kg/m = 6.31 kg Say 0.063 q
(0.307+0.063 = 0.37 q = 0.037 t)
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 33.67 kg.(5.74+27.93=33.67kg)
Cost of per kg.
Say
14.30.1 14.3 Providing joists (karries) including hoisting, fixing in position and applying wood
preservative
14.30.1 Sal wood on unexposed surface etc. complete with :
Details of cost for 300cudm.
MATERIAL
Sal wood
10x30x10x30cm = 0.30 cum. or = 300 cudm.+
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
LABOUR
114 Beldar 645 Day
Priming coat (Wood preservative)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 300 cudm.
Cost of 1 cum.
Say
14.30.2 14.3 Providing joists (karries) including hoisting, fixing in position and applying wood
preservative
14.30.2 Hollock woodon unexposed surface etc. complete with :
Details of cost for 300cudm.
MATERIAL
Hollock wood in scantling
10x30x10x30cm = 0.30 cum. or = 300 cudm.+
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
LABOUR
114 Beldar 645 Day
Priming coat (Wood preservative)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 300 cudm.
Cost of 1 cum.
Say
14.31.1 14.31 Providing and fixing bright finished brass single acting spring hinges with
necessary
14.31.1 150 mm brass screws etc. complete :
MATERIAL
389 Brass single acting spring hinges 150 mm 425 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
necessary
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
necessary
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
14.32.1 14.32 Providing and fixing bright finished brass double acting spring hinges with
necessary
MATERIAL
392 Brass double acting spring hinges 150 mm 480 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
necessary
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
necessary
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
14.33.1 14.33 Providing and fixing bright finished brass flush bolts with necessary brass
screws
14.33.1 250 mmetc. complete :
MATERIAL
404 Brass flush bolt 250 mm 150 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
screws
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
screws
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hinges
Cost of 1 hinge
Say
14.34 14.34 Providing and fixing 150 mm bright finished floor brass door stopper with rubber
Code cushion, necessary brass screws etc. to suit
Description shutter thickness
Rate Unit complete
MATERIAL
417 Brass 150 mm floor door stopper (0.357kg) 160 each
LABOUR
9999 Sundries (wooden plugs including fixing in the 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 floor door stoppers
Cost of 1 floor door stopper
Say
14.35.1 14.35 Providing and fixing bright finished brass hard drawn hooks and eyes :
14.35.1 300 mm
MATERIAL
418 Brass hard drawn hooks and eyes 300 mm 600 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 hooks and eyes
Cost of 1 hook and eye
Say
14.35.2 250 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Say
14.35.3 200 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Say
14.35.4 150 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Say
14.35.5 100 mm
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Say
14.36 14.36 Providing and fixing bright finished brass fan light pivot with necessary brass
Code screws etc. complete.
MATERIAL
429 Brass fanlight pivot 168 10 Nos
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 fanlight pivot
Cost of 1 fanlight pivot
Say
14.37 14.37 Providing and fixing 300 mm long bright finished brass chain with hook for fan
Code light including necessary brass screws etc.Rate
Description complete. Unit
MATERIAL
430 Brass chain with hook for fan light catch 36 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 chain with hooks
Cost of 1 chain with hooks
Say
14.38 14.38 Providing and fixing bright finished brass quadrant stay 300 mm long with
Code necessary brass screws etc. complete.
MATERIAL
427 Brass quadrant stays 300 mm 110 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 quadrant stayes
Cost of 1 quadrant staye
Say
14.39 14.39 Providing and fixing bright finished brass helical door spring (superior quality).
MATERIAL
442 Brass helical spring 150 mm 290 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 door springs
Cost of 1 door spring
Say
14.40.1 14.4 Providing and fixing chromium plated brass butt hinges with necessary
chromiummm
14.40.1 125x70x4 plated brass screws
(ordinary type) etc. complete.
MATERIAL
525 Chromium plated Brass butt hinges (light/ord 805 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
chromiummm
14.40.2 100x70x4 plated brass screws
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
chromium
14.40.3 75x65x4 mmplated
(heavybrass screws etc. complete.
type)
MATERIAL
524 Chromium plated Brass butt hinges (heavy) 905 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
chromium mm
14.40.4 75x40x2.5 plated brass screws
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
chromium mm
14.40.5 50x40x2.5 plated brass screws
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost of 1 no.
Say
14.41 14.41 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with
Code necessary chromium plated brass screws, Rate
Description nuts, bolts and washers
Unit etc.
Details of cost for ten Nos
MATERIAL
2467 Chromium plated Brass pull bolt lock (lockin 172 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos.
Cost of 1 no.
Say
14.42 14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior
Code side, up to seven story height made with 40Rate
Description mm dia M.S. tube
Unit1.5 m centre to
Details of cost for area 22.5m x 9.0m = 202.5 sqm
14.72X Rate as per Item No.14.72X of SH:Repairs to 7911.85 each
40mm dia MS pipe = 3765.42 kg
25mm spigot = 123.98 kg
Nuts & bolts = 37.80 kg
Clamp = 120 nos @ 1.00kg each = 120.00 kg
Challies = 90 nos @ 15.00kg each = 1350.00 kg
Cup locks = 1314 nos @ 0.50kg each = 657.00 kg
Total = 6054.20 kg = 6.054 tonne
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per sqm.
Say
14.43 14.73 Providing and fixing bright finished brass casement window fasteners or peg
Code stays to windows/ ventilators with necessary
Description welding and machine
Rate Unit screws etc.
Details for ten (10 x 0.20 = 2.00 kg)
MATERIAL
423 Brass casement window fastener 45 Each
9999 Fixing charges including welding and materials 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.00kg window fasteners
Cost of 1 kg window fastener
Say
14.44 14.74 Providing and fixing 14 mm bright finished brass spring catch to steel centre
Code hung ventilators with necessary welding and
Description machine screws
Rate Unitetc. complete.
Details for ten
MATERIAL
428 Brass fanlight catch 170 10 Nos
9999 Fixing charges including welding and materials 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 window fasteners
Cost of 1 window fastener
Say
14.45 14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and
Code under, including cutting the patch in properRate
Description shape, raking out
Unitjoints and
MATERIAL
772 White cement based polymer modified self cu 15 kg
i/c 2% wastage
9977 Carriage of white cement based polymer modi 2.12 L.S.
LABOUR
114 Beldar 645 day
115 Coolie 645 Day
9999 Scaffolding and sunderies 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
14.46 14.75A Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre
Code capacity at all heights with coconut brushes,
Description duster etc., removal
Rate Unit of silt, rubbish
Details of cost for 10 tanks
1 tank is of 500 liters capacity i.e. 5000 liters
MATERIAL
1301 Bleaching powder 1800 quintal
(asuming 0.040m depth of silt)
9999 Marking with paint i/c removal of existing mar 2.12 L.S.
LABOUR
117 Assistant Fitter or 2nd class Fitter 714 day
for opening ball cock wheel valve and other fittings
114 Beldar 645 day
for cleaning disinfecting etc
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5000 litre
Cost of 1 litre
Say
14.47 14.76 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed
Code with earth etc. and disposal of same, all as Rate
Description per the directionUnit
of Engineer-in-
LABOUR
129 Sewerman 645 day
9999 T & P Bamboo, bucket, whell barrow etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 no.
Cost of 1 no.
Say
14.48 14.77 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic
Code operated high pressure suction cum jettingRate
Description sewer cleaning Unit
machine fitted with
Details of Cost for 208 Metre
MATERIAL
9999 Soap, brush, cloths & sundries 2.12 L.S.
8500 Water for jetting / blowback 1500 ### litre
MACHINERIES
87 Hire Charges of Suction Jeting machine 2200 40000 day
LABOUR
139 Skilled Beldar (for floor rubbing etc.) 714 day
160 Technician 853 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 208 metre
Cost for 1.00 metre
Say
14.49 14.78 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging)
including disposal of slit and rubbish, all as per direction of Engineer-in-Charge.
Let a underground tank of capacity 272000 litre or 272 KL and area of
(a) Dewater and slit cleaning
Considering through pumping 20% of water to be lifted, water dischar
Cost of pumping water with pump of capacity 4000 litres per hours , =
11 Hire charges of Pump set of capacity 4000 litr 700 day
114 Beldar 645 day
(b) Scrabing the internal surface of tank
114 Beldar 645 day
115 Coolie 645 day
101 Bhisti 714 day
(c) Bleaching
6 Hire charges of Spraying machine including el 250 day
138 Sprayer (for bitumen, tar etc.) 714 day
(d) Air jetting
58 Air compressor 200 hour
114 Beldar 645 Day
(e) Ultra Violet Radiation
85 Using cost of Ultra Violet Radiation tube 190 Hour
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 570 sqm
Cost of 1 sqm
Say
14.5 14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size
Code from water supply line and removing from the
Description Rateterrace including
Unit shifting at
Details of cost for 1 No
LABOUR
For disconnecting & dismantling of existing W/s line of water storage ta
114 Beldar 645 day
For Bringing the tank at Ground Level
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each
Say
14.51.1 14.8 Providing & fixing White vitreous china water closet squatting pan (Indian type)
along pattern
14.80.1 Long with "S"W.Cor Pan
"P" trap including
of size 580x440dismantling
mm of old WC seat and "S" or "P"
MATERIAL
1953 Vitreous china Indian type W.C. pan size 58 475 each
1970 Vitreous china foot rests 250x125x25 mm 103 pair
1890 Centrifugally sand cast (spun) S&S "P" or "S" 325 each
9999 Cement sand & grit etc. 2.12 L.S.
Less for
1880 Dismantled "P" or "S" trap scrap (app. Wt 2 kg 25 kg
LABOUR
(a) For dismantling WC seat and P or S trap
114 Beldar 645 day
(b) For Fixing WC seat and "P" or "S" trap
126 Mason 1st class 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no.
Say
14.51.2 14.8 Providing & fixing White vitreous china water closet squatting pan (Indian type)
along with
14.80.2 Orissa "S"W.C
pattern or "P"
Pantrap including
of size dismantling
580x440 mm of old WC seat and "S" or "P"
MATERIAL
1954 Vitreous china orrisa type W.C. pan size 580 1290 each
1890 Centrifugally sand cast (spun) S&S "P" or "S" 325 each
9999 Cement sand & grit etc. 2.12 L.S.
Less for
1880 Dismantled "P" or "S" trap scrap (app. Wt 2 kg 25 kg
LABOUR
(a) For dismantling WC seat and P or S trap
114 Beldar 645 day
(b) For Fixing WC seat and "P" or "S" trap
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no.
Say
14.52 14.81 Cutting holes of required size in brick masonry wall for fixing of exhaust fan
Code including providing and fixing 300 mm dia PVC
Description Rate pipe conforming
Unit BIS-12818 and
Detail of Cost for 10 holes

Size 0.30x0.30x0.23 m wall
MATERIAL
12 mm plaster 1:4 (1 Cement: 4 Coarse sand)
Actual Area (10x4x0.3x0.23) = 0.296 + 0.24 L.S. For corners/sides =
13.4.1 Rate as per Item No.13.4.1 of SH:FINISHING 307.25 sqm
7752 PVC slotted pipe 200 mm dia as per IS: 1281 810 metre
LABOUR
Proportionate labour taken as actually required at site
(0.16/0.0306)= 0.11 Nos.
(0.16/0.030)x0.207 = 0.11 Nos.
114 Beldar 645 day
(1.25x0.207)/0.0306 =1.10 Nos.
9999 Add L.S. For Delay 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no.
Say
14.53 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c
Code malba all complete as per directions of Engineer-in-Charge.
LABOUR for Dismantling
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each
Say
14.54 14.83 Hacking of CC flooring including cleaning for surface etc. complete as per
Code direction of the Engineer-in-Charge.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
14.55 14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes
Code (within 50 metres lead) as per direction of Engineer-in-Charge.
9999 Dismantling of G.I. Pipe and stacking etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
14.56 14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. and
Code refixing of repaired door shutters to existing
Description door frames, including
Rate Unit replacement
Details of cost for one shutter (2.2 sqm)
Normal exiting size of shutter

1.00x2.02m =2.02sqm
MATERIAL
Assuming old hinges fixed in Tee iron frames

Half qty = 48/2=24 needs replacement
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.2 sqm or each shutter
Cost for 2.02 sqm or each shutter
Say
14.57 14.86 Providing and laying in situ seven course water proofing treatment with APP
Code (Atactic poly-propylene) modified Polymeric
Description memberane over
Rate Unitroof consisting of
MATERIAL
APP modified polymeric felt (two layers) 1.5 mm thick = 2x30 = 60 sqm
Add 10% wastage = 6 sqm
Total = 66 sqm
8200 A.P.P. modified polymeric felt (two layers) 1. 80 sqm
316 Bitumen solution primer of approved quality 47 litre
0.4x30 = 12
3x36 =108 kg = 0.108 tonne
9977 Carriage of polymeric felt 2.12 L.S.
2200 Carriage of steam coal 187 tonne
9999 Preparing roof surface, cutting grooves and 2.12 L.S.
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
130 Mistry 784 Day
9999 Sundries, brushes etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.58 14.87 Providing and laying in situ five course water proofing treatment with APP
Code (Atactic Polypropylene) modified PolymericRate
Description memberane over Unitroof consisting of
MATERIAL
APP modified polymeric felt (two layers) 2.0 mm thick = 30 sqm
Total = 33 sqm
8201 A.P.P. modified polymeric felt (two layers) 2 120 sqm
0.4x30 = 12
1.20x30x2 =72 kg = 0.072 tonne
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.59 14.88 Providing and laying in situ seven course water proofing treatment with APP
Code (Atactic Polypropylene) modified PolymericRate
Description memberane over Unitroof consisting of
MATERIAL
APP modified polymeric felt (two layers) 2.0 mm thick = 2x30 = 60 sqm
Total = 66 sqm
8201 A.P.P. modified polymeric felt (two layers) 2 120 sqm
0.4x30 = 12
3course x 36 = 108 kg = 0.108 tonne
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.60.1 14.89 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated
five layer
14.89.1 2mm 2 mm thick roof
(for corrugated watersheets)
proofing membrane, black finished reinforced with
MATERIAL
A.P.P. modified 2 mm thick - 30 sqm
Add 10% for wastage - 3 sqm
Total = 33 sqm
8203 A.P.P. modified 2 mm thick membrance reinfor 130 sqm
8206 Bitumen primer for bitumen membrance 85 litre
9977 Carriage of bitumen membrance 2.12 L.S.
1241 Commercial LPG in cylinder 84 kg
9999 Preparing roof surface, cutting grooves 2.12 L.S.
LABOUR
159 Skilled torch operator for laying tack 784 Day
130 Mistry 784 Day
114 Beldar 645 Day
9999 Sundries, brushes, bitumen torch etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.61.1 14.9 Providing and laying APP (Atactic Polypropylene Polymer) modified
14.90.1 3prefabricated
mm thick five layer, 3 mm thick water proofing membrane, black finished
MATERIAL
Total = 33 sqm
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.62.1 14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified
14.91.1 3prefabricated
mm thick five layer 3 mm thick water proofing membrane, black finished
MATERIAL
Total = 33 sqm
Fuel
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.63 14.92 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100%
Code polyester of thickness 1 to 1.25 mm bonded
Description to the membrane
Rate with intermittent
Unit
MATERIAL
Geotextile 120 gsm membrance - 30 sqm
Add 5% for wastage - 1.50 sqm
Total = 31.50 sqm
8207 Geotextile 120 gsm membrance 45 sqm
9977 Carriage of Geotextile 2.12 L.S.
LABOUR
or fitter 2.16 / 5 = 0.43
130 Mistry 784 Day
0.18 / 5 = 0.04
114 Beldar 645 Day
3.24-5 / 0.65
9999 Sundries, torch, LPG etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
14.64 14.93 Providing round the clock security guard without gun for watch & ward of
Code Government premises and its all belongings
Description by deploying neatly
Rate Unit dressed
Details of cost for 1 job (8 hour's duty)
164 Security guard without gun (8 hours shift duty 784 day
9999 Lathi,torch,dress & other sundries 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 job
Say
14.65 14.94 Providing round the clock security guard with gun for watch & ward of
Code Government premises and its all belongings
Description by deploying neatly
Rate Unit dressed
Details of cost for 1 job (8 hour's duty)
165 Security guard with gun (8 hours shift duty pe 853 day
9999 Lathi,torch,dress & other sundries 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 job
Say
15.1 15.1 Demolishing lime concrete manually/ by mechanical means and disposal of
Code material within 50 metres lead as per direction
Description Rateof Engineer- Unit
in-charge.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.2.1 15.2 Demolishing cement concrete manually/ by mechanical means including

disposal concrete
15.2.1 Nominal of material within
1:3:6 50 metres
or richer leadequivalent
mix (i/c as per direction
designof Engineer - in -
mix)
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.2.2 15.2 Demolishing cement concrete manually/ by mechanical means including

disposal concrete
15.2.2 Nominal of material within
1:4:8 50 metres
or leaner mix lead as per direction
(i/c equivalent designofmix)
Engineer - in -
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.3 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of
Code steel bars and disposal of unserviceable material
Description Rate within 50 Unit
metres lead as per
LABOUR
114 Beldar 645 day
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.4 15.4 Demolishing R.B. work manually/ by mechanical means including stacking of
Code steel bars and disposal of unserviceable material
Description Rate within 50 Unit
metres lead as per
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.5 15.5 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or
Code R.B. work (Payment shall be made on the cross
Description Rate sectional area
Unitof R.C.C. or R.B.
R.C.C. or R.B. workReinforced area considering 1% reinforcement =
LABOUR
For cutting 0.01 sqm reinforcement
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 sqm of sectional area of R.C.C. or R.B. work
Say
15.6 15.6 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or
Code R.B. work.
6 metres long 16 mm dia bars @ 1.58 kg/metre
Total weight = 94.80 kg = 0.948 quintal
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 94.80 kg
Cost of 1.00 kg
Say
15.7.1 15.7 Demolishing brick work manually/ by mechanical means including stacking of
15.7.1 In serviceable
mud mortar material and disposal of unserviceable material within 50 metres lead
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
lime mortar material and
with old disposal
mughal of unserviceable material within 50 metres lead
bricks
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
lime mortar material and disposal of unserviceable material within 50 metres lead
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.7.4 Inserviceable material and disposal of unserviceable material within 50 metres lead
cement mortar
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.8.1 15.8 Removing mortar from bricks and cleaning bricks including stacking within a
lead ofbrick
15.8.1 From 50 mwork
(stacks of cleaned
in mud mortar bricks shall be measured):
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1000 Nos
Say
lead ofbrick
(stacks of cleaned
in lime mortar bricks shall be measured):
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1000 Nos
Say
lead ofbrick
(stacks of cleaned
in cement bricks shall be measured):
mortar
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1000 Nos
Say
15.9.1 15.9 Demolishing stone rubble masonry manually/ by mechanical means including
15.9.1 In stacking of serviceable material and disposal of unserviceable material within 50
lime mortar
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.9.2 15.9 Demolishing stone rubble masonry manually/ by mechanical means including
15.9.2 In stacking
cementofmortar
serviceable material and disposal of unserviceable material within 50
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.10.1 15.1 Dismantling dressed stone work ashlar face stone work, marble work or precast
15.10.1 Inconcrete work manually/ by mechanical means including stacking of serviceable
lime mortar
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.10.2 15.1 Dismantling dressed stone work ashlar face stone work, marble work or precast
concrete
15.10.2 In cementwork manually/ by mechanical means including stacking of serviceable
mortar
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.11.1 15.11 Removing mortar from and cleaning stones and concrete articles (net quantity of
stacks
15.11.1 In lime of cleaned materials will be measured):
mortar
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.11.2 15.11 Removing mortar from and cleaning stones and concrete articles (net quantity of
stacks
15.11.2 In cementof cleaned
mortar materials will be measured):
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.12.1 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter
including
15.12.1 Of chowkhats,
area 3 sq. architrave,
metres and below holdfasts etc. complete and stacking within 50
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 each
Say
15.12.2 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter
including
15.12.2 Of chowkhats,
area beyond architrave, holdfasts etc. complete and stacking within 50
3 sq. metres
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 each
Say
15.13.1 15.13 Taking out doors, windows and clerestory window shutters (steel or wood)
including
15.13.1 Of stacking
area 3 sq. metreswithin 50 metres lead :
and below
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.13.2 15.13 Taking out doors, windows and clerestory window shutters (steel or wood)
including
15.13.2 Of stacking
area beyond within
3 sq. 50 metres lead :
metres
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.14.1 15.14 Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres
span
15.14.1 Of and 5 metres
sectional area 40height
squareincluding stacking
centimetres the material within 50 metres lead :
and above
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.14.2 15.14 Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres
span
15.14.2 Of and 5 metres
sectional height
area below 40including stacking the material within 50 metres lead :
square centimetres
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.15.1 15.15 Extra for dismantling trusses, rafters, purlins etc. of wood work for every
additional
15.15.1 Of sectionalspan
areaof40
one metrecentimetres
square or part thereof
andbeyond
above 10 metres :
Detail of cost for 1cum for every additional span of 1 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum / m span
Say
additional
15.15.2 Of sectionalspan
areaofbelow
one metre or part
40 square thereof beyond 10 metres :
centimetres
Detail of cost for 10 metre for every additional span of 1 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre / m span
Cost of 1.00 metre / m span
Say
additional
15.16.1 Of sectionalheight
area of
40one metre
square or part thereof
centimetres beyond 5 metres :
and above
Detail of cost for 1 cum for every additional height of 1 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum / m height
Say
additional
15.16.2 Of sectionalheight
area of one 40
below metre or part
square thereof beyond 5 metres :
centimetres
Detail of cost for 10 metre for every additional height of 1 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre / m height
Cost of 1.00 metre / m height
Say
15.17.1 15.17 Dismantling steel work in single sections including dismembering and stacking
within
15.17.1 R.S. 50 metres lead in:
Joists
Detail of cost for 1 quintal
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 quintal
Cost of 1.00 kg
Say
15.17.2 15.17 Dismantling steel work in single sections including dismembering and stacking
within 50 metres
15.17.2 Channels, angles,lead
teesin:
and flats
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 kg
Say
15.18 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels
Code including all gusset plates, bolts, nuts, cutting
Description Raterivets, welding
Unitetc. including
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 kg
Say
15.19 15.19 Dismantling steel work manually/ by mechanical means in built up sections
without dismembering and stacking within 50 metres lead as per direction of
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 kg
Say
15.2 15.2 Extra for dismantling trusses, rafters, purlins etc. of steel work for every
Code additional span of one metre or part thereofRate
Description beyond 10 metresUnit
Detail of cost for 1 quintal for every additional span of 1 metre beyond
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 quintal / m span
Cost of 1.00 kg /m span
Say
15.21 15.21 Extra for dismantling trusses, rafters, purlins etc. of steel work for every
Code additional height of one metre or part thereof
Description beyond 5 metres.
Rate Unit
Detail of cost for 1 quintal for every additional height of 1 metre beyon
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 quintal / m height
Cost of 1.00 kg /m height
Say
15.22 15.22 Extra for marking of structural steel work required to be re-erected.
LABOUR
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 kg /m height
Say
15.23.1 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking
material
15.23.1 For withinof50tiles
thickness metres lead.
10 mm to 25 mm
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.23.2 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking
material
15.23.2 For withinof50tiles
thickness metres lead.
above 25 mm and up to 40 mm
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.24 15.24 Demolishing dry brick pitching in floors, drains etc. including stacking of
Code serviceable material and disposal of unserviceable
Description Rate materialUnit
within 50 metres lead
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.25 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of
serviceable material and disposal of unserviceable material within 50 metres
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.26 15.26 Demolishing brick tile covering in terracing including stacking of serviceable
Code material and disposal of unserviceable material
Description Rate within 50 metres
Unit lead.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.27 15.27 Demolishing mud phaska in terracing and disposal of material within 50 metres
Code lead.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.28.1 15.28 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking
the material
15.28.1 G.S. Sheet within 50 metres lead of:
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.28.2 15.28 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking
the material
15.28.2 Asbestos withinsheet
Cement 50 metres lead of:
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.29 15.29 Dismantling stone slab roofing over wooden karries or R.C.C. battens
Code (dismantling karries and battens to be paidRate
Description for separately), including
Unit stacking of
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 cum
Say
15.3 15.3 Dismantling jack arch roofing and floors including stacking of serviceable
Code material and disposal of unserviceable material
Description Rate within 50 metres
Unit lead.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.31 15.31 Dismantling tiled roofing with battens, boarding etc. complete including stacking
Code of serviceable material and disposal of unserviceable
Description Rate material
Unitwithin 50 metres
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.32 15.32 Demolishing thatch roofing including mats, bamboo, jaffari etc. complete
Code including stacking of serviceable material and
Description Ratedisposal of unserviceable
Unit materia
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.33 15.33 Dismantling wooden ballies in posts and struts including stacking within
Code 50metres lead.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 50.00 metre
Cost of 1.00 metre
Say
15.34.1 15.34 Dismantling and stacking within 50 metres lead, fencing posts or struts including
allor
15.34.1 T' earth work
'L' iron orand
pipedismantling of concrete etc. in base of:
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
9999 Excavation, transporting and stacking the posts 2.12 L.S.
9999 Extra for lifting of R.C.C. posts being heavier 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.34.2 15.34 Dismantling and stacking within 50 metres lead, fencing posts or struts including
all earth work and dismantling of concrete etc. in base of:
15.34.2 R.C.C.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
9999 Excavation, transporting and stacking the posts 2.12 L.S.
9999 Extra for lifting of R.C.C. posts being heavier 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.35 15.35 Cutting ballies or wooden posts of fencing at the point of projection above the
Code concrete or ground and stacking the same Rate
Description within 50 metresUnit
lead.
Detail of cost for 1 ballie (post)
9999 Cutting 2.12 L.S.
9999 Transporting and stacking 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.36 15.36 Dismantling barbed wire or flexible wire rope in fencing including making rolls
Code and stacking within 50 metres lead.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 kg
Say
15.37 15.37 Dismantling wooden trellis work excluding frames but including stacking the
Code serviceable material within 50 metres lead.Rate
Description Unit
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.38 15.38 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading
Code including stacking the serviceable materialRate
Description within 50 metresUnit
lead.
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.39.1 15.39 Dismantling wooden boardings in lining of walls and partitions, excluding
supporting
15.39.1 Up to 10 mm members
thick but including stacking within 50 metres lead :
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
supportingabove
15.39.2 Thickness members butup
10 mm including
to 25 mm stacking within 50 metres lead :
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
supportingabove
15.39.3 Thickness members butup
25 mm including stacking within 50 metres lead :
to 40 mm
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.40.1 15.4 Dismantling precast concrete or stone slabs in walls, partition walls etc.
including stacking
15.40.1 Thickness up to 40 within
mm 50 metres lead :
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.40.2 15.4 Dismantling precast concrete or stone slabs in walls, partition walls etc.
including stacking
15.40.2 Thickness above 40within 50to
mm up metres
75 mmlead :
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.41 15.41 Dismantling cement asbestos or other hard board ceiling or partition walls
Code including stacking of serviceable materialsRate
Description and disposal of Unit
unserviceable
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.42.1 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including
stacking
15.42.1 75 to 80 mmthe dia
material
pipe within 50 metres lead :
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
stacking
15.42.2 100 mm dia thepipe
material within 50 metres lead :
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
stacking
15.42.3 150 mm dia thepipe
material within 50 metres lead :
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.43.1 15.43 Dismantling manually/ by mechanical means including stacking of serviceable

material
15.43.1 Water and disposal
bound macadam ofroad
unserviceable material within 50 metres lead as per
Consider a road 6 metres wide and 6 metres length wise 25 cm averag
LABOUR
For cutting road taking out soiling and metalling including sorting and
114 Beldar 645 Day
115 Coolie 645 Day
9999 Labour for stacking of serviceable material an 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36.00 sqm
Cost of 1.00 sqm
Say
15.43.2 15.43 Dismantling manually/ by mechanical means including stacking of serviceable

material androad
15.43.2 bituminous disposal of unserviceable material within 50 metres lead as per
Consider a road 6 metres wide and 6 metres length wise 30 cm averag
LABOUR
For cutting road taking out soiling and metalling including sorting and
114 Beldar 645 Day
115 Coolie 645 Day
9999 Labour for stacking of serviceable material an 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36.00 sqm
Cost of 1.00 sqm
Say
15.44.1 15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches
after
15.44.1 15 mm taking
to 40out
mmthe pipes, bore
nominal manually/ by mechanical means including stacking of
LABOUR
Trenching and refilling etc
114 Beldar 645 Day
115 Coolie 645 Day
9999 Dismantling G.I. pipe and stacking etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.44.2 15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches
after taking
15.44.2 Above 40 mm outnominal
the pipes,
boremanually/ by mechanical means including stacking of
LABOUR
Trenching and refilling etc
114 Beldar 645 Day
115 Coolie 645 Day
9999 Dismantling G.I. pipe and stacking etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.45.1 15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out
the to
15.45.1 Up pipes, manually/
150 mm by mechanical means breaking lead caulked joints, melting
diameter
Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including refilling of exc
1x40.26x0.55x0.75 m =16.61cum
Deduct for pipes of average 100 mm dia =1x40.26x(22/7)/4x(0.018)x(
Total =16.17cum
LABOUR
2.8.1 Rate as per Item No.2.8.1 of SH:EARTH WO 286.85 cum
2.25 Rate as per Item No.2.25 of SH:EARTH WOR 253.95 cum
761 Fuel wood 500 quintal
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
the pipes,
15.45.2 Above 150manually/
mm dia upbytomechanical
300 mm diameans breaking lead caulked joints, melting
1x40.26x0.65x0.75 m =19.63cum
Deduct for pipes of average 250 mm dia =1x40.26x(22/7)/4x(0.274)x(
Total =17.26cum
LABOUR
2.8.1 Rate as per Item No.2.8.1 of SH:EARTH W 286.85 cum
2.25 Rate as per Item No.2.25 of SH:EARTH W 253.95 cum
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
the pipes,
15.45.3 Above 300manually/
mm diameterby mechanical means breaking lead caulked joints, melting
1x40.26x0.85x0.75 m =25.67cum
Deduct for pipes of average 450 mm dia =1x40.26x(22/7)/4x(0.48)x(0.
Total =18.38cum
LABOUR
2.8.1 Rate as per Item No.2.8.1 of SH:EARTH W 286.85 cum
2.25 Rate as per Item No.2.25 of SH:EARTH W 253.95 cum
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
15.46.1 15.46 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches
after
15.46.1 Up totaking
600 mm outdiameter
the pipes, manually/ by mechanical means breaking lead caulked
1x40.26x1.30x1.65 m =86.36cum
Deduct for pipes of average 450 mm dia =1x40.26x(22/7)/4x(0.48)x(0.
Total=79.07cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
15.46.2 15.46 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches
after taking
15.46.2 Above 600 mmout diameter
the pipes, manually/ by mechanical means breaking lead caulked
1x40.26x1.30x1.65 m =86.36cum
Deduct for pipes of average 450 mm dia =1x40.26x(22/7)/4x(1.00)x(1
Total=54.73cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
15.47.1 15.47 Dismantling asbestos cement pressure pipes including excavation and refilling
trenches
15.47.1 Up to 150after taking out the pipes manually/ by mechanical means and stacking
mm diameter
Detail of cost for 10 metre or 11 nos joints
10.00x0.55x0.75 m =4.125cum
Deduct for pipes of average 100 mm dia =1x10x(22/7)/4x(0.118)x(0.1
Total=4.016cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.47.2 15.47 Dismantling asbestos cement pressure pipes including excavation and refilling
trenches
15.47.2 Above 150after
mmtaking out the pipes manually/ by mechanical means and stacking
diameter
Detail of cost for 10 metre or 11 nos joints
10.00x0.65x0.75 m =4.88cum
Deduct for pipes of average 250 mm dia =1x10x(22/7)/4x(0.274)x(0.2
Total=4.29cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
15.48 15.48 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various
Code sizes including demolishing of R.C.C. workRate
Description manually/ by mechanical
Unit means and
Details of cost for 1 man hole
Demolition of R.C.C. slab
1.3x1.2x0.15 m =0.234cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.192cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
9999 Removel of C.I. Cover with frame including st 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.49 15.49 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of
Code various sizes including demolishing of R.C.C.
Description Ratework manually/
Unitby mechanical
Detail of cost for 1 man hole
Demolition of R.C.C. slab
1.1x0.9x0.15 m =0.148cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.106cum Say 0.11cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
9999 Removel of C.I. Cover with frame including st 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.5 15.5 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete
Code pit completely, taking out the shaft, refillingRate
Description the excavated gap,
Unit stacking the
Dismantling cement concrete
1:4:80.90x0.90x1.35m =1.094cum
Less shaft 1/4x22/7x(0.450)x(0.450)x1.10 m =0.175cum
1:2:40.90x0.90x0.15m =0.122cum
Less shaft 1/4x22/7x0.15x0.45 m =0.024cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
9999 Sundries for scaffolding etc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
15.51 15.51 Dismantling of road gully chamber of various sizes including C.I. grating with
Code frame including stacking of useful materials
Description near the site and
Rate disposal of
Unit
Detail of cost for one chamber
a) 1:5:101.05x1.00x0.15m =0.16cum
Dismantling brick work in cement mortar
2.70x0.20x0.45m =0.24cum
b) 1:2:42.70x0.20x0.15m =0.08cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
9999 Dismantling C.I. Grating 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.52 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including
Code stacking of useful materials near the site and
Description disposal of unserviceable
Rate Unit materials
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.53.1 15.53 Dismantling of C.I. sluice valve including stacking of useful materials within a
leadtoof150
15.53.1 Up 50 mm
metres
diameter
Detail of cost of dismantling 10 sluice valves (ace.) 100mm
LABOUR
114 Beldar 645 Day
9999 Sundries for removing the R.C.C. cover etc for 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
15.53.2 15.53 Dismantling of C.I. sluice valve including stacking of useful materials within a
lead of 150
15.53.2 Above 50 metres
mm diameter
Detail of cost of dismantling 10 sluice valves (ace.) 100mm
LABOUR
114 Beldar 645 Day
9999 Sundries for removing the R.C.C. cover etc for 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
15.54 15.54 Dismantling of spindle fire hydrant including stacking of useful materials within
50 metres lead.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Nos
Cost of 1 No
Say
15.55.1 15.55 Dismantling of cement concrete platform along with curtain walls and base
concrete
15.55.1 120 x 120etc.
cm including
(outside tostacking
outside)of useful materials near the site and disposal of
Detail of cost for one platform
Dismantling cement concrete 1:5:10
4.00x0.35x0.12m =0.168cum
0.80x0.80x0.075m =0.048cum
4.00x0.20x0.30m =0.24cum
4.00x0.10x0.20m =0.088cum
Dismantling 40 mm C.C. flooring 1:2:4
1.00x1.00x0.04m =0.04cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
concrete
15.55.2 210 x 120etc.
cm including
(outside tostacking
5.80x0.35x0.22m =0.243cum
0.80x1.70x0.075m =0.102cum
5.80x0.20x0.30m =0.348cum
6.20x0.10x0.20m =0.124cum
1.90x1.00x0.04m =0.08cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
concrete
15.55.3 320 x 120etc.
cm including
(outside tostacking
8.00x0.35x0.12m =0.336cum
2.80x0.80x0.075m =0.168cum
8.00x0.20x0.30m =0.48cum
8.40x0.10x0.20m =0.168cum
3.00x1.00x0.04m =0.12cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 each
Say
15.56 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for
Code plaster including disposal of rubbish to theRate
Description dumping ground within 50 metres
Unit
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.57 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and
Code false ceiling including disposal of unserviceable
Description Rate material and stacking of
Unit
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
15.58 15.58 Demolishing R.C.C. work by mechanical means and stockpiling at designated
Code locations and disposal of dismantled materials
Description Rate up to a lead Unit
of 1 kilometre,
LABOUR
128 Mate 714 Day
Labour for operating pneumatic tools
114 Beldar 645 Day
Labour for cutting reinforcement bars.
114 Beldar 645 Day
MACHINERY
40 Air compressor 250 cfm with two leads for pn 1600 day
39 Tractor with trolley . 1200 day
41 Joint cutting machine with 2-3 blades 800 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say
15.59 15.59 Dismantling of flexible pavement (bituminous courses) by mechanical means

Code and disposal of dismantled material up to aRate
Description lead of 1 kilometre,
Unit as per direction
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
MACHINERY
39 Tractor with trolley . 1200 day
38 Tractor with ripper attachment. 1200 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say
15.6 15.6 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste
Code materials by mechanical means, including Rate
Description loading, transporting,
Unit unloading to
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say
16.1 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12
Code tonne capacity after excavating earth to anRate
Description average of 22.5 cm
Unitdepth, dressing to
(A) preparation of subgrade.
Earth work in excavation including dressing etc. 100sqm.x22.5cm (ave
LABOUR
128 Mate 714 day
115 Coolie 645 Day
114 Beldar 645 Day
3 Hire charges of Diesel Road Roller - 8 to 10 t 3000 day
113 Chowkidar 645 Day
(B) Conslidation of subgrade
Roller charges (one roller does 1860 sqm. of conosolidation of sub - gra
3 Hire charges of Diesel Road Roller - 8 to 10 t 3000 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.2 16.2 Extra for compaction of earth work in embankment under optimum moisture
Code conditions to give at least 95% of the maximum
Description Rate dry densityUnit
(proctor density).
LABOUR
(Extra to item No.2.3 in Earth work)
101 Bhisti 714 day
Roller charges (one roller does 1860sqm. of consolidation per day of 8
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 cum.
Cost per cum.
Say
16.3.1 16.3 Supplying and stacking at site.

16.3.1 90 mm to 45 mm size stone aggregate
MATERIAL
2901 Stone Aggregate (Single size) : 100 mm nomin 1360 cum
Total
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say

16.3.2 63 mm to 45 mm size stone aggregate
MATERIAL
Total
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say

16.3.3 53 mm to 22.4 mm size stone aggregate
MATERIAL
Total
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say

16.3.4 Over burnt (Jhama) brick aggregate 120 mm to 40 mm
MATERIAL
2908 Over burnt (Jhama) Brick Aggregate: 120 mm 550 cum
Total
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say

16.3.5 Over burnt (Jhama) brick aggregate 90 mm to 45 mm
MATERIAL
2909 Over burnt (Jhama) Brick Aggregate: 90 mm t 600 cum
Total
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say

16.3.6 Stone screening 13.2 mm nominal size (Type A)
MATERIAL
2910 Stone chippings/ screenings 12.5/ 13.2 mm no 1200 cum
2903 Stone chippings/ screenings 4.75 mm nominal 1400 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one cum.
Say

16.3.7 Stone screening 11.2 mm nominal size (Type B)
MATERIAL
2904 Stone chippings/ screenings 150 micron nomin 1400 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one cum.
Say

16.3.8 Red bajri
MATERIAL
304 Bajri 1000 cum
2311 Carriage of Red bajri 163.93 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one cum.
Say

16.3.9 Good earth
Excavation :
114 Beldar 645 Day
115 Coolie 645 Day
979 Royalty for good earth 40 cum
2241 Carriage of Good earth 204.92 cum
by mechanical transport upto 5 km lead
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say

16.3.10 Moorum
MATERIAL
810 Moorum 500 cum
2265 Carriage of Moorum 163.93 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one cum.
Say
16.4 16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM
Code specifications in uniform thickness, hand picking,
Description Rate rolling with
Unit3 wheeled
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Roller charges (one roller does 30 cum consolidation per day of 8 hours
113 Chowkidar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say
16.5.1 16.5 Laying water bound macadam sub-base with brick aggregate and binding
material,
16.5.1 Over burntearth etc. including
(Jhama) screening,
brick aggregate 120 sorting
mm to 40and
mmspreading to template and
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Roller charges (one roller does 230cum. consolidation per day of 8 hours
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one cum.
Say
16.5.2 16.5 Laying water bound macadam sub-base with brick aggregate and binding
material,
16.5.2 Over burntearth etc. including
(Jhama) screening,
brick aggregate sorting
90 mm to 45and
mmspreading to template and
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Roller charges (one roller does 230cum. consolidation per day of 8 hours
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one cum.
Say
16.6.1 16.6 Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling
complete
16.6.1 With road including preparation
roller/ hand roller of the surface and rolling.
Details of cost for 6 mm thick and 100 sqm area = 0.60 cum.
(A) Supplying and stacking of Red bajri at site.
MATERIAL
304 Bajri 1000 cum
2311 Carriage of Red bajri 163.93 cum
(B) Spreading of red bajri
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Roller charges (one roller does 1860sqm. consolidation per day of 8 hour
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.7.1 16.7 Brick edging in full brick width and half brick depth including excavation, refilling
and disposal
16.7.1 With commonofburntsurplus
clayearth
F.P.S.lead upto
(non 50 metres.
modular) bricks of class designation 7.5
Details of cost for 10m.
MATERIAL
LABOUR
115 Coolie 645 Day
9999 Removal of rubbish 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10m.
Cost per m.
Say
16.8.1 16.8 Brick edging laid lengthwise with half brick depth including excavation, refilling
and disposal
16.8.1 With commonofburntsurplus
clayearth
F.P.S.lead upto
(non 50 metres
modular) : of class designation 7.5
bricks
Details of cost for 10m.
MATERIAL
LABOUR
115 Coolie 645 Day
9999 Removal of rubbish 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10m.
Cost per m.
Say
16.9 16.9 Scarifying metalled (water-bound) road surface including disposal of rubbish,
Code lead upto 50 m and consolidation of the aggregate
Description Rate receivedUnit
from scarifying with
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
Consolidation of scarified material
100sqm.x50mm = 5cum +
Less 20% wastage = 1 cum.
= 4 cum.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.1 16.1 Making bajri path including preparation of subgrade, supplying and laying brick
Code aggregate of 50 mm nominal size 7.5 cm deep
Description Ratewith blindingUnit
material consisting
Earth work in excavation including dressing etc.
100x0.075=7.5cum.
2.6.1 (Rate as per item no.2.6.1 of S.H. Earth work) 205.45 cum
Collection and stacking of brick aggregate 53mm nominal size 100x0.
286 Brick Aggregate (Single size) : 50 mm nominal 650 cum
Supply staking Red Bajri

100x0.012= 1.2 cum
16.3.8 Rate as per Item Number 16.3.8 of SH: Road 1557.25 cum
Collection and stacking of moorum at site
100x0.012 = 1.20cum.
16.3.10 Rate as per Item Number 16.3.10 of SH: Roa 888.3 cum
Spreading and consolidation of brick aggregate and blinding material e
114 Beldar 645 day
115 Coolie 645 Day
101 Bhisti 714 Day
Spreading of red bajri, watering and rolling
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.11 16.11 Dry stone pitching 22.5 cm thick including supply of stones and preparing
Code surface complete.
MATERIAL
1158 Stone for pitching 15 cm x 22.5 cm 600 cum
2.25x2245/1000 = 5.05 t
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.12.1 16.12 Dry brick pitching half brick thick in drains including supply of bricks and
preparing
16.12.1 With common the surface complete
burnt clay :
F.P.S. (non modular) bricks of class designation 7.5
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.13.1 16.13 Cutting road and making good the same including supply of extra quantities of
materials i.e.portion
16.13.1 bituminous aggregate, moorum screening, red bajri and labour required.
Details of cost for 1.08cum. (road 6 metres wide, 0.6 metre length wi
MATERIAL
Supplying and stacking stone aggregate 53mm to 24 mm nominal size a
Supplying and stacking red bajri at site
Supplying and stacking moorum at site
LABOUR
For cutting road and taking out soling and metalling including sorting a
114 Beldar 645 Day
115 Coolie 645 Day
Relaying soling stone 3.6x0.15=0.54cum.
114 Beldar 645 Day
115 Coolie 645 Day
Relaying road metal with extra quantity and consolidation to 0.10m, t
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Painting two coats, 3.6sqm. including labour for spreading grit
114 Beldar 645 Day
115 Coolie 645 Day
9999 Barrier, chowkidar, sprayman, mate, etc. 2.12 L.S.
TOTAL
Add 1 % for water charges on all except (A) i.e. on (3412 - 220.71) =
TOTAL
TOTAL
TOTAL
Cost for 1.08 cum.
Cost per cum.
Say
16.13.2 16.13 Cutting road and making good the same including supply of extra quantities of
materials
16.13.2 Water i.e. aggregate,
bound macadam moorum screening, red bajri and labour required.
Details of cost for 0.90cum.
Consider a road 6 metres wide and 0.6m. lengthwise and 0.25m cm a
MATERIAL
Supplying and stacking stone aggregate 53mm to 24mm nominal size at
Supplying and stacking moorum at site.
LABOUR
For cutting road and taking out soling and metalling including sorting a
114 Beldar 645 Day
115 Coolie 645 Day
For relaying soling stone 3.6x0.15=0.54cum.
114 Beldar 645 Day
115 Coolie 645 Day
For relaying road metal with extra quantity and consolidation to 0.10m
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Barrier and chowkidar etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.90 cum.
Cost per cum.
Say
16.14 16.14 Cutting bajri paths and making good the same including supply of extra
Code quantities of brick aggregate, moorum andRate
Description red bajri required.
Unit
10x0.075=0.75cum.
MATERIAL
Supplying and stacking 50mm brick

aggregate at site(extra quantity)
Supplying and stacking moorum at site
LABOUR
For cutting, sorting out, spreading and consolidation of aggregate
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.15.1 16.15 Supplying at site :

16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5
Code coarsesand : 3 graded stone aggregate 12.5
Description mm nominal size)
Rate Unitwith wooden
Details of cost for 10 posts = 0.336cum
Cubical contents of one post
Area bottom A1 = (15+12.5)/2 x8.75+½x3.14 x(6.25)²
=120.31+61.38=181.69sqcm.
Area bottom A2 = (10+7.5)/2 x6.25+½x3.14 x(3.75)² sqm
= 54.68+22.08 = 76.76 sqcm.
(A1A2)^½ = 118.10sqcm
A1+A2+(A1A2))^½ = 0.03766 sqm
Volume = (1.05)/3x0.03766 = 0.01316 cum
=0.0132cum.
Volume of lower and square portion
(16.5x16.5x75) / 100³ = 0.0204cum.
Total volume = 0.0132+0.0204 cum
= 0.0336 cum.
Qty. for 10 post
= 0.0336x10
= 0.336cum.
Cement concrete 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 graded ston
4.1.2 Rate as per item no 4.1.2 of S.H. Concrete Wo 7783.7 cum
Extra labour for laying cement concrete in RCC work
114 Beldar 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
M.S. Reinforcement
6mm dia. bars
10x4x1.88m = 75.20m+
10x9x0.50m =45.00m =
120.20m
120.20m@0.22kg/m =26.44kg.
5.22.2 Rate as per Item No.5.22.2 of SH:Reinforced 87.5 kg
5.9.1 Rate as per item No.5.9.1 of SH : Reinforced 307.95 sqm
6mm C.Plaster 1:2 (1 Cement : 2 fine sand)
(0.072)/10x9.88 = 0.071
114 Beldar 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Hire and running charges of mixer 2.12 L.S.
9999 Extra for removing burr, cleaning with wire br 2.12 L.S.
9977 Carriage of RCC posts 2.12 L.S.
9999 Wooden plugs or 6mm bar nibs 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.336 cum
Cost for one cum
Say
16.15.2 16.15 Supplying at site :

16.15.2 Welded steel wire fabric of required width having rectangular mesh painted with
Code two or more coats of enamel paint of approved
Description Rate shade over aUnit
coat of primer
Details of cost for 27 sqm (209.25 kg).
MATERIAL
Steel wire fabric 0.9m wide

rectangular mesh 75x25mm size weight not
less than 7.75kg/sqm. 30x0.9 = 27sqm
2314 Carriage of Barbed wire 145.72 tonne
7.75x27=209.25kg=0.209tonne
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 209.25 kg
Cost per kg.
Say
16.16 16.16 Supplying and fixing turn buckles and straining bolts for barbed wire fencing.
Details of cost for one set
MATERIAL
1030 Galvanised steel turn buckles 25 each
1028 Straining bolts 80 each
9977 Carriage of turn buckles and straining bolts 2.12 L.S.
Labour for fixing straining bolts and turn buckles
TOTAL
TOTAL
TOTAL
TOTAL
Cost per set
Say
16.17.1 16.17 Fencing with R.C.C. post placed at required distance, embedded in cement
concrete
16.17.1 With blocks,wire
G.I. barbed every 15th post, last but one end post and corner post shall be
MATERIAL
G.I. barbed wire
30x9 = 270m +
10x6.32 = 63m
Total = 333m
333m @9.38kg/100m =31.24kg = 0.31q
1029 Galvanised steel barbed wire 5500 quintal
9999 G.I. staples or binding wire 2.12 L.S.
LABOUR
Labour for fixing costs in line, fixing and stretching wire
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 333m
Cost per m
Say
16.18.1 16.18 Fencing with angle iron post placed at required distance embedded in cement
concrete
16.18.1 With blocks,wire
G.I. barbed every 15th post, last but one end post and corner post shall be
MATERIAL
G.I. barbed wire
30x9 = 270.00m
2x10x(12+32)1/2 = 63.24
= 333.24m
333.24m @ 9.38kg/100m
=31.26 kg say 0.31 q
1029 Galvanised steel barbed wire 5500 quintal
Supplying and fixing Turn buckle & staple
16.16 Rate as per Item Number 16.16 of SH: Road 243.75 each se
9999 G.I. staples 2.12 L.S.
Labour for fixing posts in line and fixing and stretching wire:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 333.24m
Cost per m
Say
16.19 16.19 Supplying at site Angle iron post & strut of required size including bottom to be
Code split and bent at right angle in opposite direction
Description Rate for 10 cm Unit
length and drilling
Details of cost for 1 qunital
MATERIAL
M.S. angle = 1.00 qtl.
Add 5% wastage = 0.05 qtl.
Total = =1.05 qtl
LABOUR
114 Beldar 645 Day
For spotting, bending of angle and drilling holes etc. :
114 Beldar 645 Day
9999 Sundries such as drilling bit etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 qunital
Cost of one kg
Say
16.2 16.2 Welded steel wire fabric fencing with posts of specified material and of standard
Code design placed and embedded in cement concrete
Description Rate blocks 45x45xUnit 60 cm of mix
Details of csot for 30 metres i.e.30x1.20=36.00sqm
Labour for fixing posts in line fixing and stretching - welded wire fabric :
114 Beldar 645 Day
9999 G.I. staple or binding wire 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 36 sqm
Cost per sqm
Say
16.21 16.21 Engraving letters in hard stone

Details of cost for 6 letters 8 cm height
LABOUR
For Engraving stone-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6 letters of 8cm heights
Cost per cm. height per letter
Say
16.22 16.22 Providing and fixing 15x15x90 cm boundary stone of hard stone with top 30 cm
Code chisel dressed on all four sides including top
Description (cost of excavation,
Rate Unit refilling and
Details of cost for one stone
1151 Boundry stone top chisel dressed 15x15x90 80 each
Labour for fixing
114 Beldar 645 Day
9977 Carriage to site 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each.
Say
16.23 16.23 Providing and fixing 15 cm dia at top, 20 cm at bottom and 90 cm high precast
Code reinforced cement concrete 1:1.5:3 (1 cement
Description Rate: 1.5 coarse sand
(i) Cement concrete 1:2:4 (1 cement :2 Coarse sand :4 graded stone
Volume of frustum of cone:
L/3 x [A1+A2+sqrt(A1A2)] = 0.825/3 x

[0.095²+
0.075² + sqrt(0.095 x 0.075²)]x3.142
=0.01882
(A) Volume of hemi sphere:
½ x 4 /3 x PI x r³ =
½x(4/ 3)x(22/7)x0.075³=0.00100 (B)
Total volume = A+B = 0.01982 Say 0.02cum
(ii) Extra for laying cement concerte in RCC work
114 Beldar 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
(iii) M.S. reinforcement-
6mm dia. bar
5.99 metre =5.99x0.22 =1.32kg.
5.22.1 Rate as per item no. 5.22.1 of SH : RCC work 88.95 kg
(iv) Centering and shuttering-
1/2x3.142 (0.19+0.15)x0.825 =0.441 +
3.142/4(0.19)² =0.028 +
1/2x4x3.142(0.075)² = 0.035
= 0.504
Say 0.50sqm.
(v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)-
1/2x3.142 (0.19+0.15)x0.825 =0.44 +
3.142/4(0.19)² =0.028 +
1/2x4x3.142(0.075)² = 0.035
= 0.504
Say 0.50sqm.
Labour for mortar
114 Beldar 645 Day
101 Bhisti 714 Day
Labour for plaster
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Extra for removing burr 2.12 L.S.
9999 Scaffolding, sundries etc. 2.12 L.S.
(vi) Labour for fixing
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each.
Say
16.24.1 16.24 Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5
coarse sand
16.24.1 35x111x25 cm : 3size
graded stone aggregate 20 mm nominal size) kilometre stone as
(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3 graded sto
0.35x0.25x0.835m = 0.073
0.37x0.27x0.10m = 0.010
1/2x22/7x(0.175)²x0.25m = 0.012
= 0.095cum
Say 0.10cum.
(ii) Extra for laying cement concrete in RCC work
114 Beldar 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
0.10cum @48.06kg/cum. =4.806kg.
Say 4.81kg.
(0.35+2x0.25)x0.835 = 0.710 sqm
0.35x0.25 = 0.088sqm
(0.37+2x0.27)x0.10 = 0.091sqm
2x0.37x0.01 = 0.007 sqm
2x2x0.25x0.1 = 0.010sqm
1/2x3.142/4x(0.35)² = 0.048sqm
1/2x0.35x0.25x3.142 = 0.138sqm.
= 1.092sqm. Say 1.09 sqm
Qty. as per centering and shuttering = 1.092sqm
0.35x0.835 = 0.292sqm
0.37x0.10 = 0.037sqm
1/2x3.142/4x(0.35)²= 0.048sqm
2x0.37x0.01 = 0.007 sqm
= 1.476 sqm Say 1.48 sqm
Labour for mortar
114 Beldar 645 Day
101 Bhisti 714 Day
Labour for plaster
115 Coolie 645 Day
101 Bhisti 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per stone
Say
coarse sand :cm
16.24.2 50x152.5x25 3 graded
size stone aggregate 20 mm nominal size) kilometre stone as
(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3 graded st
0.50x0.25x1.145m = 0.143cum. +
0.52x0.27x0.13m = 0.018cum. +
1/2x22/7x(0.25)²x0.25m = 0.025cum.
= 0.186 cum.
Say 0.19cum.
114 Beldar 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
0.19cum @48.06kg/cum. =9.131kg.
Say 9.13 kg.
(0.50+2x0.25)x1.145 = 1.145 sqm
1/2x(0.25)²x3.142 = 0.098
3.142(0.25)x(0.25) =0.196
(0.52+2x0.27)x0.13 =0.138
2x0.52x0.01 =0.10
2x2x0.25x0.01 =0.010
1x0.50x0.25 =0.125
=1.722sqm. Say 1.72 sqm
Qty. as per centering and shuttering = 1.722sqm. +
0.50x1.145 = 0.572 +
0.52x0.13 = 0.068sqm. +
1/2x(0.25)²x3.142 = 0.098 +
2x0.52x001 = 0.010
= 2.470sqm Sq. 2.47 sqm.
Labour for mortar
114 Beldar 645 Day
101 Bhisti 714 Day
Labour for plaster
115 Coolie 645 Day
101 Bhisti 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per stone
Say
coarse sandcm
16.24.3 35x93.5x18 : 3size
graded stone aggregate 20 mm nominal size) kilometre stone as
(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3 graded st
0.35x0.18x0.835m = 0.0526 cum. +
0.37x0.20x0.10m = 0.0074 cum.
= 0.060 cum.
114 Beldar 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
0.06cum @48.06kg/cum. =2.8836 kg. Say 2.88 kg.
(0.35+2x0.18)x0.835 = 0.593 sqm
(0.37+2x0.20)x0.10 = 0.077 sqm
2x0.35x0.18 = 0.126 sqm
2x0.37x0.01 = 0.007sqm
2x2x0.18x0.01 = 0.007sqm
= 0.810 sqm
Qty. as per centering and shuttering = 0.810sqm
0.35x0.835 = 0.292sqm
0.37x0.10 =0.037sqm
2x0.37x0.01 =0.007sqm
= 1.146 sqm Say 1.15sqm
Labour for mortar
114 Beldar 645 Day
101 Bhisti 714 Day
Labour for plaster
115 Coolie 645 Day
101 Bhisti 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
16.25 16.25 Surface dressing on new surface with paving bitumen of grade VG - 10 of
Code approved quality using 2.25 kg of bitumen Rate
Description per sqm with 1.65 cum of stone
Unit
Bitumen S-90@2.25kg per sqm. =225 kg = 0.225 tonne.
Stone aggregate 13.2mm nominal size @1.65cum. per 100sqm.
Steam coal for heating bitumen @2 quintal

per tonne of bitumen = 2x0.225=0.450q
Labour for cleaning the road surface, heating and spraying bitumen a
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 day
115 Coolie 645 Day
(b) For heating and spraying bitumen :
130 Mistry 784 Day
138 Sprayer (for bitumen, tar etc.) 714 Day
114 Beldar 645 Day
(c) For screening and spreading aggregate :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
(d) Consolidation Charges
101 Bhisti 714 Day
1 Hire charges of Coaltar Boiler 900 to 1400 litr 800 Day
7 Hire charges of Coaltar Sprayer 350 Day
(e) Misc:
364 Wire brush 20 each
365 Soft brush 20 each
9999 Brooms and gunny bags 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 Sqm.
Cost per Sqm.
Say
16.26 16.26 Surface dressing on new surface in two coats with bitumen of grade VG -10 of
Code approved quality using 1.8 kg of bitumen per
Description sqm with 1.5 cum
Rate Unit of stone
Bitumen S-90/A-90 @
1.8kg/sqm.=180kg.=0.18 tonne
Steam coal for heating bitumen @2 qunital

per tonne
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
(e) Misc:
Second Coat
Bitumen S-90/A-90 @ 1.10kg per sqm =

110kg.=0.11 tonne
Steam coal for heating bitumen @2 qunital

per tonne of bitumen
(a) For cleaning and brushing loose chips:
128 Mate 714 Day
115 Coolie 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for two coats per 100sqm.
Cost per Sqm.
Say
16.27 16.27 Surface dressing on old surface with hot bitumen of grade VG - 10 of approved
Code quality using 1.95 kg of bitumen per sqm with
Description Rate1.50 cum of stone
Unit chippings 11.2
MATERIAL
Bitumen 1.95kg./sqm.= 195kg. or 0.195t
@ 1.50cum. per 100 sqm.
Steam coal for heating bitumen @2 quintal

per tonne of bitumen
Labour for cleaning the road surface, heating and spraying bitumen an
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
(e) Misc:
Brushes etc. for cleaning
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.28.1 16.28 Surface dressing one coat on new surface with bitumen of specified grade at a
16.28.1 rate
Usingofbitumen
1.95 kg/sqm of surface
emulsion area with
(minimum 50% 1.5 cum of
bitumen stone chippings
content- RS grade 13.2 mm
conforming
Code to IS : 8887)
310 Bitumen emulsion 30800 tonne
@1.50 cum. per 100 sqm. = 1.50cum
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
(b) For Spraying bitumen emulsion :
130 Mistry 784 Day
114 Beldar 645 Day
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.29.1 16.29 Surface dressing one coat on old surface with bitumen of specified grade at the
rate ofbitumen
16.29.1 Using 1.22 kg/ emulsion
sqm of surface area 50%
(minimum with bitumen
1.10 cumcontent-
of stoneRS
chippings 11.2 mm
grade conforming
Code to IS : 8887)
Bitumen emulsion @1.22 kg per Sqm. =122

kg. or 0.122 tonne
310 Bitumen emulsion 30800 tonne
Stone chippings 11.2mm nominal size @

1.10cum. per 100 sqm
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
(b) For Spraying bitumen emulsion :
130 Mistry 784 Day
114 Beldar 645 Day
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.30.1 16.3 Providing and applying tack coat using hot straight run bitumen of grade VG - 10
16.30.1 Onincluding
W.B.M.heating
@ 0.75 the
Kg bitumen,
/ sqm spraying the bitumen with mechanically operated
2916 Paving Asphalt VG -10 of approved quality 24500 tonne
MATERIAL
(with thick wire)
9999 Gunny bags 2.12 L.S.
LABOUR
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
(b) For heating bitumen:
114 Beldar 645 Day
(c) For applying tack coat:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.30.2 16.3 Providing and applying tack coat using hot straight run bitumen of grade VG - 10
16.30.2 Onincluding heating
bituminous the bitumen,
surface spraying
@ 0.50 Kg / sqm the bitumen with mechanically operated
MATERIAL
(with thick wire)
9999 Gunny bags 2.12 L.S.
LABOUR
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
114 Beldar 645 Day
(c) For applying tack coat:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.31.1.1 16.31 Providing and applying tack coat using bitumen emulsion conforming to IS:8887
usingrapid
16.31.1 With emulsion
settingpressure
bitumendistributer
emulsion including preparing the surface & cleaning
16.31.1.1On W.B.M / W.M.M. @ 0.4kg/sqm
MATERIAL
7382 Bitumen emulsion rapid setting (R.S.) confirm 18250 tonne
MACHINERY
75 Road sweeper (Mechamical Broom) @ 1250 s 450 hour
61 Emulsion Pressure Distributor @ 1750 sqm pe 700 hour
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
usingrapid
16.31.1 With emulsion pressure
setting bitumendistributer
emulsion including preparing the surface & cleaning
16.31.1.2On bituminous surface @ 0.25kg/sqm
MATERIAL
7382 Bitumen emulsion rapid setting (R.S.) confirm 18250 tonne
MACHINERY
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
usingmedium
setting distributer
bitumen including preparing the surface & cleaning
emulsion
16.31.2.1On W.B.M / W.M.M. @ 0.4kg/sqm
MATERIAL
7742 Bitumen emulsion medium setting (M.S.) confi 27100 tonne
MACHINERY
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
usingmedium
setting distributer
bitumen including preparing the surface & cleaning
emulsion
16.31.2.2On bituminous surface @ 0.25kg/sqm
MATERIAL
MACHINERY
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
16.32.1 16.32 2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of
16.32.1 13.2
With mm sizeAsphalt
paving and 11.2 mm size
grade VG -respectively perthen
10 heated and 100mixed
sqm and
with52solvent
kg andat
56the
kg rate
of
Code of 70 grams per kg of asphalt
Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of 13.2mm
(ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum. of 11.2
Bitumen :52xl.8+56x0.9=144kg. or 0.144

tonne
2916 Paving Asphalt VG 10 of approved quality 24500 tonne
Solvent 70gms/kg. for 0.144 t = 10.08kg.
2914 Solvent 30 kilogra
@1.80cum. per 100 sqm
Steam coal for heating bitumen @ 2

qunitals per tonne of bitumen =
2x0.144=0.288q
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
(c) For screening and spreading premixed aggregate :
130 Mistry 784 Day
114 Beldar 645 Day
(at barrier for night watch and for road

roller)
101 Bhisti 714 Day
23 Hot Bitumen mixer 0.5 cum i/c hand cart 3500 day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
13.2 mm
16.32.2 With sizeAsphalt
paving and 11.2 mm size
grade VG - respectively per 100 sqm and 52 kg and 56 kg of
30 with no solvent
Asphalt 60/70
Bitumen :52xl.8+56x0.9=144kg. or 0.144

tonne
7309 Paving Asphalt VG-30 of approved quality 38150 tonne
@1.80cum. per 100sqm.
@0.90cum. per 100sqm
Steam coal for heating of bitumen @2

quintals per tonne of bitumen
=2x0.144=0.288q
(a) For cleaning :
128 Mate 714 day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
101 Bhisti 714 Day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
13.2 mm
16.32.3 With size and
Refinery 11.2 mm
Modified size respectively
Bitumen per 100 sqm
CRMB 55 conforming and 52
to IRC: SP:kg53and 56 kg of
Asphalt 80/100
Modified Bitumen CRMB - 55 (Refinary

produced) :52xl.8+56x0.9=144kg. or 0.144
tonne
7739 Modified Bitumen Refinary produced CRMB - 28000 Tonne
Solvent 70gms/kg. for 0.144 t = 10.08kg
Stone chippings 13.2mm nominal size @1.80cum. per 100sqm.
@1.80cum. per 100sqm.

quintals per tonne of bitumen =
2x0.144=0.288q
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
101 Bhisti 714 Day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.33.1 16.33 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings o
13.2 mm
16.33.1 With andAsphalt
paving 11.2 mmgrade
size respectively perand
VG - 10 heated 100then
sqmmixed
and 52with
kg and 56 kg
solvent at of
thehot
rate
Paving Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum. of 13.2
(ii) Hot bitumen @56kg. per cum. of aggregate @1.12cum. of 11.2mm
Bitumen :52x2.25+56x1.12= 180kg
Solvent 0.07x180=12.60kg.
@1.80cum. per 100 sqm.
2.25+1.12=3.37 cum

=2x0.18=0.36q
(a) For cleaning :
128 Mate 714 day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
101 Bhisti 714 Day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
13.2 mm
16.33.2 With andAsphalt
paving 11.2 mmgrade
size respectively
VG - 30 with per 100 sqm and 52 kg and 56 kg of hot
no solvent
(i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum. of 13.
(ii) Hot bitumen @56kg. per cum. of stone aggregate@1.12cum. of 11
2.25+1.12=3.37 cum.
(a) For cleaning :
128 Mate 714 day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
(c) For cleaning, mixing and spreading pre-mix aggregate :
130 Mistry 784 Day
114 Beldar 645 Day
1.05x0.18)/0.267 = 0.71 Nos.
101 Bhisti 714 Day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
13.2 mm
16.33.3 With and 11.2
Refinery mm size
Modified respectively
Bitumen CRMB 55 perconforming
100 sqm and to 52 kgSP:
IRC: and53
56 kg of hot
(i) Hot bitumen @52kg.per cum. of stone chippings @2.25cum. of 13.2
(ii) Hot bitumen @56kg. per cum. of aggregate @1.12cum. of 11.2mm
52x2.25+56x1.12=180kg
Solvent 0.07x180=12.60kg
@2.25 cum. per 100sqm
@1.12 cum. per 100sqm
2.25+1.12=3.37 cum.+

=2x0.18=0.36q
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 day
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
101 Bhisti 714 Day
(e) Misc:
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.34 16.34 2 cm premix carpet surfacing with 2.4 cum of stone chippings 11.2 mm nominal
Code size per 100 sqm and bitumen emulsion (medium
Description Rate setting min.
Unit65% bitumen
Bitumen emulsion M.S. @ 96kg per cum. of aggregate
96x2.4=230kg =0.230t
@ 2.4cum. per 100 sqm
LABOUR
(a) For mixing and spreading premix aggregate :
130 Mistry 784 Day
114 Beldar 645 Day
(b) Consolidation Charges
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.35 16.35 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal
Code size per 100 sqm and bitumen emulsion (medium
Description Rate setting min.
Unit65% bitumen
Bitumen emulsion M.S. @ 96kg per cum. of aggregate
96x3 = 288 kg = 0.288 t
@ 3.00 cum. per 100 sqm
LABOUR
(a) For mixing and spreading premix aggregate :
130 Mistry 784 Day
114 Beldar 645 Day
(b) Consolidation Charges
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.36.1 16.36 Providing and laying Bitumen Penetration Macadam with hard stone aggregate o
quality,
16.36.1 For 50mm size and grading
compacted as specified,
thickness usingwith bitumen
coarse of suitable
aggregate of sizepenetration grade
50-20 mm graded
Code @ 0.60 cum
Description per 10 sqm key aggregate of size
Rate12.5 mm graded
Unit@ 0.15 cum per 10
MATERIAL
Taking stone aggregate 40mm = 45%
20mm = 44%
11.2mm = 8%
Stone dust = 3%
1159 Stone dust 1100 cum
i.e. 20mm
@ 50kg/10 sqm.
(B) Labour:
114 Beldar 645 day
for spreading stone metal
114 Beldar 645 Day
for hand packing
114 Beldar 645 Day
dry rolling
114 Beldar 645 Day
Bajri spreader
114 Beldar 645 Day
for spreading key aggregate
114 Beldar 645 Day
for spraying bitumen
114 Beldar 645 Day
of power roller
128 Mate 714 Day
(C) Machinery :
9999 Misc. items as spray nozzle, joint paper, cocon 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 370 Sqm.
Cost per sqm.
Say
16.36.2 16.36 Providing and laying Bitumen Penetration Macadam with hard stone aggregate o
quality,
16.36.2 For 75 mmsizecompacted
and grading as specified,
thickness in twowith bitumen
layers usingof suitable
stone penetration
aggregate grade
of size 63-
Code 41 mm graded
Description @ 0.90 cum per 10 sqm key aggregate
Rate of size 20.0
Unit mm graded @
(A)Material:
Taking output as 300 sqm. for single layer.
Coarse agg. = 300/10x0.90 = 27 cum.
Key agg = 300/10x0.18 = 5.4 cum.
Bitumen = 300/10x68 = 2.04 t.
(B) Labour:
114 Beldar 645 day
for spreading stone metal
114 Beldar 645 Day
for hand packing
114 Beldar 645 Day
dry rolling
114 Beldar 645 Day
/Bajri spreader
114 Beldar 645 Day
for spreading key aggregate
114 Beldar 645 Day
for spraying bitumen
114 Beldar 645 Day
road roller
128 Mate 714 Day
(C) Machinery :
9999 Misc. items as spray nozzle, joint paper, cocon 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 300 Sqm.
Cost per sqm.
Say
16.37.1 16.37 Providing and laying bitumen mastic wearing course (as per specifications) with
industrial
16.37.1 25 mm thick bitumen of grade 85/25 conforming to IS : 702, prepared by using
Details of cost for surface area of 17.40 sqm for single layer of 25 mm
MATERIAL
Taking wearing coat as 1 tonne and density as 2.3 gm/c.c Volume of
(i) Bitumen of penetration 85/25 @ 10.2% by

weight of mix
(ii) Weight of coarse aggregate @ 40% (1000 - 150) x 40/100 = 340 kg
Stone aggregate : 340/43.38x0.0283 = 0.222 cum.
(iii) Weight of fine aggregate @ 15% 850 x15/100 = 127.5 kg., volume
(iv) Weight of lime stone dust @ 45% (850-340-127.5) = 382.50 kg., V
(v) Precoated stone chipping for surface finish: Volume of chips @
Bitumen for precoated stone chipping @ 2% =0.009x1600x2/100= 0.28
(0.222 + 0.009) =0.231 cum.
LABOUR
130 Mistry 784 Day
128 Mate 714 day
16 Mastic Cooker 750 day
9999 sundries (Sealing of joints, placing angles, wa 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 17.40 sqm
Cost per sqm
Say
16.37.2 16.37 Providing and laying bitumen mastic wearing course (as per specifications) with
industrial
16.37.2 40 bitumen of grade 85/25 conforming to IS : 702, prepared by using
mm thick
Details of cost for surface area of 10.875sqm for single layer of 25 mm
MATERIAL
Taking wearing coat as 1 tonne and density as 2.3 gm/c.c Volume of
(ii) Weight of coarse aggregate @ 40% (1000 - 150) x 40/100 = 340 kg
Stone aggregate : 340/43.38x0.0283 = 0.222 cum.
(iii) Weight of fine aggregate @ 15% 850 x15/100 = 127.5 kg., volume
(iv) Weight of lime stone dust @ 45% (850-340-127.5) = 382.50 kg., V
(v) Precoated stone chipping for surface finish: Volume of chips @
Bitumen for precoated stone chipping @ 2% =0.009x1600x2/100= 0.28
(0.222 + 0.009) =0.231 cum
for mastic cooker (Taking capacity of

cooker as one tonne)
LABOUR
130 Mistry 784 Day
128 Mate 714 day
16 Mastic Cooker 750 day
9999 sundries (Sealing of joints, placing angles, wa 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 10.875 sqm
Cost per sqm
Say
16.38.1 16.38 2.5 cm thick bitumastic sheet with hot bitumen of approved quality, using stone
16.38.1 chippings
With paving (60% with 12.5
Asphalt grademm
VGnominal sizeand
- 10 heated andthen
40% mixed
with 10with
mmsolvent
nominal
atsize) @
the rate
80/100 bitumen @56kg. per cum. of aggregate and 128kg. per cum. of
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Solvent 0.070 kg. x 303 kg. = 21.21kg
Labour for cleaning road surface, heating bitumen mixing and spreadin
(a) For cleaning :
128 Mate 714 day
114 Beldar 645 Day
115 Coolie 645 Day
(b) For heating bitumen :
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
(d) Consolidation charges :
(at barriers for night watch and for road

roller)
101 Bhisti 714 Day
(e) Misc :
Wire brush (with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
chippings
16.38.2 With paving(60% with grade
Asphalt 12.5 mm
VGnominal
- 30 size and 40% with 10 mm nominal size) @
60/70 bitumen @56kg. per cum. of aggregate and 128kg. per cum. of
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Total= 0.303t

quintals per tonne of bitumen =
2x0.303=0.606q
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
(at barriers for night watch and for road

roller)
101 Bhisti 714 Day
(e) Misc :
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
chippings
16.38.3 With (60%
Refinery with 12.5
Modified mm nominal
Bitumen CRMBsize and 40% with
55 conforming to 10 mm
IRC: SPnominal
: 53 size) @
@56kg. per cum. of aggregate and 128kg. per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Total = 0.303 t
0.070 kg. x 303 kg. = 21.21kg
(a) For cleaning :
128 Mate 714 day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
101 Bhisti 714 Day
(e) Misc :
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.39.1 16.39 4 cm thick bitumastic sheet with hot bitumen of approved quality, using stone
chippings
16.39.1 With paving(60% with 12.5
Asphalt grademm
VGnominal sizeand
- 10 heated andthen
40% mixed
with 10with
mmsolvent
nominal
atsize) @
the rate
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 t
0.70kg.x479=33.53kg

qunitals per tonne of bitumen
= 2x0.479=0.958q
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
130 Mistry 784 day
114 Beldar 645 Day
101 Bhisti 714 Day
(e) Misc :
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
chippings
16.39.2 With paving(60% with grade
asphalt 12.5 mm
VGnominal
- 30 withsize and 40% with 10 mm nominal size) @
no solvent
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 t

=2x0.479=0.958 qtl
(a) For cleaning :
128 Mate 714 day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
101 Bhisti 714 Day
(e) Brushes etc. for cleaning :-
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
chippings
16.39.3 With (60%
Refinery with 12.5
Modified mm nominal
Bitumen CRMBsize and 40% with
55 conforming to 10 mm
IRC: SPnominal
: 53 size) @
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 tonne
0.70kg.x479=33.53kg.

qunitals per tonne of bitumen =
2x0.479=0.958q
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
130 Mistry 784 Day
114 Beldar 645 Day
101 Bhisti 714 Day
(e) Misc :
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.4 16.4 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and
Code retained on 180 micron sieve) with bitumenRate
Description using 128 kg of Unit
bitumen of grade VG
@ 128kg/cum. of sand 128x0.60 =

76.80kg. = 0.0768 m.t

=2x0.768=0.1.536 qtl
(a) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
114 Beldar 645 Day
0.38/96x76.8
114 Beldar 645 day
11.39/0.75x0.60
130 Mistry 784 Day
0.06/0.75x0.60
(d) Miscellaneous :
101 Bhisti 714 Day
(e) Misc :
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.41 16.41 Providing and laying seal coat over prepared surface of road with bitumen
Code heated in bitumen boiler fitted with the spray
Description set spraying using
Rate Unit 98 kg of bitumen

=2x0.0.98=1.96 qtl
(a) For heating and spraying bitumen :
130 Mistry 784 Day
114 Beldar 645 Day
(b) For cleaning :
128 Mate 714 Day
114 Beldar 645 Day
115 Coolie 645 Day
(c) For screening and spraying aggregate :
128 Mate 714 Day
114 Beldar 645 Day
(d) Misc :
101 Bhisti 714 Day
(e) Misc :
(with thick wire)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
16.42 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40
Code mm nominal size) in pavements, laid to required
Description Rate slope and camber
Unit in panels as
MATERIAL
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
MACHINERY
Side shuttering
Taking the slab to be 5cm thick and width to be 6 metre, length of roa
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
16.43.1 16.43 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi
tracks/ runways,
16.43.1 Cement concreteusing cement
prepared withcontent as permachine
batch mixing design mix, using coarse sand and
MATERIAL
Labour :-For mixing and laying
114 Beldar 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
For compaction by vibrator
114 Beldar 645 Day
Machinery :
(Assuming 25 cum. per day)
21 Pin vibrator 250 Day
(SHP) with 50 cum. output per day
22 Surface Vibrator 300 Day
with 25 cum. output per day
Add for steel form work
16.43B Rate as per Item Number 16.43B of SH:Road 915.85 cum
9999 Cutting and making joints 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.43.2 16.43 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi
tracks/ runways,
16.43.2 Cement concreteusing cement content
manufactured as perbatching
in automatic design mix, using
plant (RMC coarse
plant)sand
i/c and
Code transportation
Description to site in transit mixer Rate Unit
MATERIAL
Labour :-For mixing and laying
114 Beldar 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
For compaction by vibrator
114 Beldar 645 Day
Machinery :
(Assuming 25 cum. per day)
29 Carriage of concrete by transit mixer. 37.3 km/cum
21 Pin vibrator 250 Day
(SHP) with 50 cum. output per day
22 Surface Vibrator 300 Day
with 25 cum. output per day
Add for steel form work
16.43B Rate as per Item Number 16.43B of SH:Road 915.85 cum
9999 Cutting and making joints 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.44 16.44 Extra for providing and mixing hardening compound of approved quality as per
Code manufacturer's specification in cement concrete.
Details of cost for 1 litre
MATERIAL
(including cartage)
TOTAL
TOTAL
TOTAL
TOTAL
Cost per litre
Say
16.45 16.45 Providing and fixing in position pre-moulded joint filler in expansion joints.
Details of cost for 18mm thick 15cm deep and 300m in length
317 Premoulded joint filler 12 mm thick 360 sqm
= 300x0.15 = 45 sqm.
45x0.018 =0.81cum.
Weight 256.3kg. per cum. = 256.3x0.81
= 207.6kg. say 0.21 tonne
Labour for fixing etc. :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 300m length, 18mm width and 15cm depth
Cost for one cm. depth one cm. width per metre length.
Say
16.46.1 16.46 Providing and laying in position bitumen hot sealing compound for expansion
joints etc.
16.46.1 Using grade 'A' sealing compound.
Details of cost for 20mm wide 20mm deep and 300 metres in length.
Sealing compound-
300x0.02x0.02 = 0.12cum.
Weight 256.3kg. per cum. = 256.3x0.12 =

30.76 kg
30.76 = 0.3076 Say
0.03 tonne
Labour for filling :
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 20mm depth, 20mm width and 300m length
Cost for one cm. depth one cm. width per metre length.
Say
16.47.1 16.47 Painting runway/taxi track/apron marking with adequate nos of coats to give
uniform
16.47.1 New finish
work (Twowith road coats)
or more marking paint of superior make as approved by the
MATERIAL
1st Coat - 1.66 +
2nd Coat -1.13
Total = 2.79
7256 Superior quality road marking paint (water ba 130 litre
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
(including painting brush, wire brush, labour for controlling traffic and
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.47.2 16.47 Painting runway/taxi track/apron marking with adequate nos of coats to give
uniform
16.47.2 Old workfinish
(One with roadcoats)
or more marking paint of superior make as approved by the
MATERIAL
7256 Superior quality road marking paint (water ba 130 litre
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.48.1 16.48 Painting road surface marking with adequate nos of coats to give uniform finish
with ready
16.48.1 New mixed
work (Two orroad
moremarking
coats) paint conforming to IS : 164, on bituminous
MATERIAL
7255 Road marking paint (spirit based) 115 litre
(confirming to IS 164
spirit base)
9977 Carriage of paint (1.48/0.8x0.08x6.9) 2.12 L.S.
LABOUR
128 Mate 714 Day
131 Painter 714 Day
114 Beldar 645 Day
for stretching of rope & errecting of

barricading
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.48.2 16.48 Painting road surface marking with adequate nos of coats to give uniform finish
withwork
16.48.2 Old ready(One
mixed road marking
or more coats) paint conforming to IS : 164, on bituminous
MATERIAL
7255 Road marking paint (spirit based) 115 litre
(confirming to IS 164 spirit base)
9977 Carriage of paint. 2.12 L.S.
LABOUR
128 Mate 714 Day
131 Painter 714 Day
114 Beldar 645 Day
(stretching of rope & errecting of

barricading etc.)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
16.49 16.49 Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe
Code under footpath, including providing cementRate
Description concrete 1:3:6 (1 cement : 3 coarse
Unit
(i) Earth work in excavation
Channel :- 10x1x1.00x0.20x0.15 = 0.30+
Bell mouth :-10x1x1.00x0.50x(0.18+0.075)/2 = 0.64
Total = 0.94
2.8.1 (Rate as per item no. 2.8.1 of SH: Earth work) 286.85 cum
(ii) Cement concrete 1:4:8
Channel :-10x1x1.00x0.20x0.075 = 0.15 cum.
4.1.8 Rate as per item no 4.1.8 of SH : Concrete W 6326 cum
(iii) Cement concrete 1:3:6
Channel
10x1x1.00x0.20x0.75 = 0.15 +
Bed of bell mouth :
10x1x1.00x0.50x(0.18+0.075)/2 = 0.64 +
Haunches portion
10x2x(0.35+0.075)/2x0.25x0.375 = 0.40 +
Rect part :-
10x2x0.35x0.25x0.375 = 0.65 +
Quadrant portion :-
10x1[(0.30x0.30)-3.142/4(0.30)²]x0.30 =0.06+
Central middle part :-
10x1x0.30x0.25x0.075 = 0.05
Total = 1.95 cum.
4.1.5 (Rate as per item no.4.1.5 S.H. : Cement Con 6833.4 cum
(iv) RCC in shelves
10x1x1.00x0.50x0.05 = 0.25cum.
5.3 Rate as per item no. 5.3 SH : Reinforced cem 10719.35 cum
(v) Reinforcement for RCC @100kg/cum.
0.25x100=25kg.
5.22.1 Rate as per item no. 5.22.1 SH : Reinforced 88.95 kg
(vi) Centering and shuttering
For shelves (sides)
10x2(1.00+0.50)x0.05 = 1.50+
Front side of bell mouth :
10x2(0.446)x0.375 = 3.34 +
Pipe portion:
10x[0.30x0.375-3.142/4(030)²] = 0.04 +
Out side of bell mouth
Total= 10x(1.00 =0.50)x0.45 = 9.00+
Deduct pipe opening
Total =10x0.785x0.30x0.30 = (-)0.71
Total = 13.17
5.9.1 Rate as per item No.5.9.1 of SH : RCC 307.95 sqm
(vii) cement plaster on RCC slab
10x1.00x0.50 = 5.00 +
10x2(1.00+0.50)x0.05 = 1.50+
Total = 6.50 sqm.
5.23 Rate as per item no.13.16.1 253.05 sqm
(viii) Neat cement punning:
Qty. same as marked (x) at (9vi) =
Total =3.34+0.04 = 3.38 sqm.
Channel portion:
10x1x(0.85+0.30)/2x0.25 = 1.43
Total = 4.81
13.18 Rate as per item no.13.18 S.H. Finishing 67.8 sqm
114 Beldar 645 Day
101 Bhisti 714 Day
9999 Hire charges of mixer 2.12 L.S.
Labour for plaster
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos.
Cost for one bell mouth
Say
16.5 16.5 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body
Code shall be moulded ASA (Acrylic styrene Acryloretrite
Description Rate ) or HIPUnit
(High impact
MATERIAL
7426 Cat's eye 80 each
9977 Carriage of cats eyes 2.12 L.S.
LABOUR
114 Beldar 645 Day
(including material required for fixing cats eyes and providing barricading
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 15 Nos.
Cost for one cat's eye.
Say
16.51.1 16.51 Preparation of sub-base road pavement with commercial dry lime (slaked), fly
ash stabilised
16.51.1 Minimum soil with
thickness a mix of 3% lime, 12% fly ash and 85% local suitable soil
15 cm
Details of cost for 6.67 sqm. or 1 cum.
MATERIAL
1980 Flyash 11 cum
LABOUR
(i)For earth work :
114 Beldar 645 Day
115 Coolie 645 Day
979 Royalty for good earth 40 cum
2241 Carriage of Good earth 204.92 cum
(ii) For mixing :
114 Beldar 645 Day
115 Coolie 645 Day
(iii) For rolling layers :
(iv) Labour for spreading and watering :
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
16.52 16.52 Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime: 2 fly ash
Code : 3 coarse sand : 6 graded stone aggregateRate
Description 20 mm nominal Unitsize), including
Details of cost for a path of area 10sqm. no. of blocks required for 10s
(a) Concrete in blocks
(108x0.30x0.30x0.09 = 0.875 cum.)
16.52Y Rate as per sub analysis Item Number 16.52 3727.1 cum
(b) Labour for surface excavation :
114 Beldar 645 Day
115 Coolie 645 Day
(c) For levelling course of fine sand
6501 Sand zone V (Jamuna) 1300 cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
(d) For finishing with 10mm thick cement plaster
cement plaster with cement mortar 1:3(1

Cement: 3 Coarse sand)
qty. for 9.72sqm. = 0.0972 cum
115 Coolie 645 Day
101 Bhisti 714 Day
(e) For laying blocks and filling joints with Jamuna sand for filling joint
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10sqm. or 0.9cum.
Rate per cum.
Say
16.53 16.53 Providing and fixing concertina coil fencing with punched tape concertina coil
Code 600 mm dia 10 metre openable length ( total
Description length 90 m), having
Rate Unit 50 nos rounds
Details of cost for 30.00 m length
MATERIAL
8691 Punched tape concertina coil 600 mm dia 10 m 600 bundle
(Having 50 Nos. of rounds per 6 meter = 1

bundles)
Therefore, Nos. of bundles 30/10=3bundles)
8692 RBT reinforced barbed wire 7 metre
9 rounds = 9x30 = 270m
8693 Turn buckle and strengthening bolt 42 each se
9999 G.I. staples clips etc. 2.12 L.S.
LABOUR
Labour for fixing straightening cutting of tape/ coils & wire
114 Beldar 645 Day
0.50x2 = 1.00 Nos (Taken double due to

height)
Total
TOTAL
TOTAL
TOTAL
cost for 30.00 metre
cost per metre
Say
16.54.1 16.54 Providing and laying Dense Graded Bituminous Macadam using crushed stone
aggregates
16.54.1 50 to 100 mm of average
specifiedcompacted
grading, premixed
thicknesswith
withbituminous
bitumen ofbinder
grade and filler,
VG-30 @ 5%
Code (percentage by weight of total mix) and lime
Description filler @ 2% (percentage
Rate Unit by weight of
Details of cost for 195 cum (or 450 M.T. )
MATERIAL
(percentage by weight of total mix)
Aggregate
Total weight of mix = 450 tonnes

Weight of bitumen = 22.50 tonnes
Weight of aggregate = 450 -22.50 = 427.50
tonnes
Taking density of aggregate = 1.5 tonne/cum

Volume of aggregate =427.50/1.5 =285cum
Grading - II/19 mm (Nominal Size)
25 - 10mm size = 30% of 285 = 85.5 cum
10 - 5mm size = 28% of 285 = 79.8 cum
5mm and below = 40% of 285 = 114 cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 79.8 * 50 /100
Qty = 79.8 * 50 /100
Qty = 285 * 40 /100
Lime Filler @ 2% ( percentage by weight of aggregate)
(consitering density of lime as 1.29 T per cum) V =8.55/1.29 = 6.63 cu
V =8.55/1.29 = 6.63 cum
Machinery/ Hire charges:
62 Hot mix Plant -120 TPH capacity 15000 hour
63 Hot mix Plant 100 TPH Capacity 13000 hour
64 Paver finisher Hydrostatic with sensor contro 1500 hour
69 Generator 250 KVA 400 hour
52 Front end loader 1 cum bucket capacity (incl 1300 hour
53 Tipper -5 Cum 3.3 tonne
Add 10 per cent of cost of carriage to cover cost of loading and unload
55 Smooth Wheeled Roller 8 to 10 tonne 300 hour
for initial break down rolling.(6*0.65)
54 Vibratory roller 8 to 10 tonne 600 hour
for intermediate rolling.(6*0.65)
56 Tandem Road Roller 1200 hour
Finish rolling with 6-8 tonnes smooth

wheeled tandem roller.(6*0.65)
128 Mate 714 Day
114 Beldar 645 Day
working with HMP, mechanical broom, paver, roller, asphalt cutter and as
for checking line & levels
Total
TOTAL
TOTAL
TOTAL
Cost for 195 cum(450 M.T.)
Cost per cum.
Say
16.54.2 16.54 Providing and laying Dense Graded Bituminous Macadam using crushed stone
aggregates
16.54.2 50 to 100 mm of average
specifiedcompacted
grading, premixed
thicknesswith
withbituminous
bitumen ofbinder
grade and filler,
VG-30 @ 5%
MATERIAL
(percentage by weight of total mix)
Aggregate

tonnes


25 - 10mm size = 30% of 285 = 85.5 cum
10 - 5mm size = 28% of 285 = 79.8 cum
5mm and below = 40% of 285 = 114 cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 79.8 * 50 /100
Qty = 79.8 * 50 /100
Qty = 285 * 40 /100
V =8.55/1.29 = 6.63 cum
76 Drum Type HMP of 60-90 TPH capacity @ 75 t 12000 hour

128 Mate 714 Day
114 Beldar 645 Day
working with HMP, mechanical broom,

paver, roller, asphalt cutter and assistance
for setting out lines, levels and layout of
construction
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.55.1 16.55 Providing and laying bituminous macadam using crushed stone aggregates of
specified
16.55.1 50 grading
to 100 mm premixed
average with bituminous
compacted binder,
thickness with transported
bitumen to VG-30
of grade site by@
Code 3.50% (percentage
Description by weight of total mix) prepared
Rate in Batch Type
Unit Hot Mix Plant
MATERIAL
3.5% of 450 MT = 15.75 MT
Weight of mix = 205 * 2.5 = 450 tonnes
Aggregate
Total weight of mix = 450 tonnes Weight of bitumen = 15.75 tonnes We

Volume of aggregate =434.25/1.5
=289.50cum

25 - 10mm size = 40% of 289.50 = 115.8
cum
10 - 5mm size = 40% of 289.50 = 115.8 cum
5mm and below = 20% of 289.50 = 57.9 cum
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 289.50 * 20 /100
MACHINERY
@75tonne per hour actual output
X * 10 / 100 = 13500.00 * 10 / 100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.55.2 16.55 Providing and laying bituminous macadam using crushed stone aggregates of
specified
16.55.2 50 grading
to 100 mm premixed
average with bituminous
compacted binder,
thickness with transported
bitumen to VG-30
of grade site by@
Code 3.50% (percentage
Description by weight of total mix) prepared
Rate in Drum Type
Unit Hot Mix Plant
MATERIAL
3.5% of 450 MT = 15.75 MT
Weight of mix = 205 * 2.5 = 450 tonnes
Aggregate
Total weight of mix = 450 tonnes Weight of
bitumen = 15.75 tonnes
tonnes

=289.50cum

25 - 10mm size = 40% of 289.50 = 115.8
cum
10 - 5mm size = 40% of 289.50 = 115.8 cum
5mm and below = 20% of 289.50 = 57.9 cum
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 115.8 * 50 /100
Qty = 289.50 * 20 /100
MACHINERY
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.56.1 16.56 Providing and laying semi- dense Bituminous concrete using crushed stone
aggregates
16.56.1 25 of specified
mm compacted grading,
thickness withpremixed with
bitumen of bituminous
grade VG-30 @binder and filler, by
5% (percentage
Code weight of total mix) and lime filler @ 2% (percentage
Description Rate by weight
Unitof Aggregate)
Details of cost for 195 cum (450 tonnes)

Area covered for 25 mm thickness=7800
sqm
MATERIAL
5% of 450 MT = 22.50 MT
Aggregate

tonnes

9.5 - 4.75 mm size = 57% of 285 = 162.45
cum
4.75mm and below = 41% of 285 = 116.85
cum
Qty = 162.45 * 50 /100
Qty = 162.45 * 50 /100
Qty = 285 * 41 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 7800 Sqm
Cost per sqm
Say
16.56.2 16.56 Providing and laying semi- dense Bituminous concrete using crushed stone
aggregates
16.56.2 25 of specified
mm compacted grading,
thickness withpremixed with
bitumen of bituminous
grade VG-30 @binder and filler, by
5% (percentage
Code weight of total mix) and lime filler @ 2% (percentage
Description Rate by weight
Unitof Aggregate)

Area covered for 25 mm thickness=7800
sqm
MATERIAL
5% of 450 MT = 22.50 MT
Aggregate

tonnes


9.5 - 4.75 mm size = 57% of 285 = 162.45
cum
4.75mm and below = 41% of 285 = 116.85
cum
Qty = 162.45 * 50 /100
Qty = 162.45 * 50 /100
Qty = 285 * 41 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 7800 Sqm
Cost per sqm
Say
16.57.1 16.57 Providing and laying Bituminous concrete using crushed stone aggregates of
specified
16.57.1 40/50 mm grading,
compactedpremixed withwith
thickness bituminous
bitumenbinder and
of grade filler,@
VG-30 transporting the
5.5% (percentage
Code by weight of total mix) and lime filler @ 3%Rate
Description (percentage by weight
Unit of Aggregate)
MATERIAL
@5.50% (percentage by weight of total mix
Aggregate

tonnes

=283.50cum

13.2 - 10mm size = 30% of 283.50 = 85.05
cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07
cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100
(consitering density of lime as 1.29 T per cum) V = 12.758/1.29 = 9.89

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 191 cum(450 Tonne)
Cost per cum.
Say
specified
16.57.2 40/50 mm grading,
bitumenbinder and
of grade filler,@
5.5% (percentage
Unit of Aggregate)
MATERIAL
Aggregate
tonnes

=283.50cum

13.2 - 10mm size = 30% of 283.50 = 85.05
cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07
cum
Waste Plastic @ 8% of the weigh of bitumen

i.e. 24.75*8%
7280 Waste plastic additive 38100 tonne
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.57.3 specified
40/50 mm grading,
bitumenbinder and
of grade filler, transporting
PMB-40 @ 5.5% the
MATERIAL
312 Bitumen grade PMB - 40 32950 tonne
Aggregate

tonnes
=283.50cum

13.2 - 10mm size = 30% of 283.50 = 85.05
cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07
cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
specified
16.57.4 40/50 mm grading,
bitumenbinder and
CRMB-60 @ 5.5% the
MATERIAL
7741 Modified Bitumen Refinary produced CRMB - 29150 tonne
Aggregate

tonnes

=283.50cum
13.2 - 10mm size = 30% of 283.50 = 85.05
cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07
cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.57.5 specified
40/50 mm grading,
bitumenbinder and
of grade filler,@
5.5% (percentage
Unit of Aggregate)
MATERIAL
Aggregate

tonnes

=283.50cum

13.2 - 10mm size = 30% of 283.50 = 85.05
cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07
cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
specified grading, premixed with bituminous binder and filler, transporting the
16.57.6 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage
Unit of Aggregate)
MATERIAL
Waste Plastic @ 8% of the weigh of bitumen

i.e. 24.75*8%
7280 Waste plastic additive 38100 tonne
Aggregate

tonnes

=283.50cum

13.2 - 10mm size = 30% of 283.50 = 85.05
cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07
cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
specified
16.57.7 40/50 mm grading,
bitumenbinder and
PMB-40 @ 5.5% the
Code (percentage
Description by weight of total mix) and lime filler
Rate @ 3% (percentage
Unit by weight of
MATERIAL
312 Bitumen grade PMB - 40 32950 tonne
Aggregate
tonnes

=283.50cum

13.2 - 10mm size = 30% of 283.50 = 85.05
cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07
cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
specified
16.57.8 40/50 mm grading,
bitumenbinder and
CRMB-60 @ 5.5% the
Code (percentage
Description by weight of total mix) and lime filler
Rate @ 3% (percentage
Unit by weight of
MATERIAL
7741 Modified Bitumen Refinary produced CRMB - 29150 tonne
Aggregate

tonnes

=283.50cum
13.2 - 10mm size = 30% of 283.50 = 85.05
cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 = 119.07
cum
Qty = 85.5 * 50 /100
Qty = 85.5 * 50 /100
Qty = 70.88 * 50 /100
Qty = 70.88 * 50 /100
Qty = 283.5 * 40 /100

128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.58.1 16.59 Manufacturing, supplying and fixing retro reflective sign boards made up of 2
mm thick aluminium
16.59.1 Mandatory/ Regulatory sheet,
signface to be
boards of fully covered
900 mm with with
diametre high support
intensitylength of
Code 3750 mm
Details cost for 1 no. of 0.636 sqm
MATERIAL
Aluminium sheet 2 mm thick
3.14/4x(0.9)x(0.9)=0.636 sqm
add 10% wastage = 0.064 i.e. 0.700sqm @ 5.60kg/ sqm = 3.92kg
2704 Aluminium Strip 40 mm wide and 2 mm thick 240 kilogra
3.92kg or 0.00392 MT
High intensity retro reflective sheet = 0.70 sqm.
High intensity sheet for lettering / sign and border etc.
Taking 40% Area =0.28sqm,total = 0.70 + 0.28 = 0.98 sqm
8690 High intensity retro - reflective sheet 1443 sqm
Steel work
Supporting frame 25x25x3mm for 900mm dia board:-
3.14D=3.1416x0.90=2.83 metre
@ 1.10kg/m =3.11kg
Angle iron 35x35x.5mm for fixing the support frame with vertical Tee-ir
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 3.75 metre
@ 4.50kg/m = 16.88 kg
Bass plate to be welded at bottom end of tee (As hold fast)
(100x100x5mm)x7850/133)=0.39kg, total = 3.11 + 0.26 +16.88 + 0.39 =
Total = 20.64 + 1.03 = 21.67kg.
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
9999 Cost of material for drilling holes, nut bolts & r 2.12 L.S.
Painting with synthetic enamel paint on steel work
support frame 25x25x3mm
=2.83x0.10=0.283 sqm
Fixing angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Vertical post Tee 50x50x6mm
=3.75x0.20=0.750sqm
Base plate 100x100x5mm
Surface area = 2x[0.10x0.10] =0.02
4x0.10x0.005 = 0.002
Total = 1.069 sqm
Painting with epoxy paint on back side of aluminium sheet.
9999 Sundries and hold fast etc. 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost of 1 no.
Say
16.58.2 16.59 Manufacturing, supplying and fixing retro reflective sign boards made up of 2
mm thick aluminium
16.59.2 Cautionary sheet,
/warning sign face to
boards ofbe fully covered
equilateral with high
triangular shapeintensity
having each side
Code of 900 mm with support length of 3650 mmRate
Description Unit
Details cost for 1 board of 0.35 sqm
MATERIAL
Aluminium sheet 2 mm thick
Area 1/2x(0.9)x(0.78)=0.35 sqm
add 10% wastage = 0.04 i.e. 0.39sqm @ 5.60kg/ sqm = 2.18kg
2.18kg or 0.00218 MT
High intensity retro reflective sheet = 0.39 sqm.
High intensity sheet for lettering / sign/ symbol/ border etc.
Taking 40% Area =0.16sqm, total = 0.39 + 0.16 = 0.55 sqm
Steel work
Angle iron frame 25x25x3mm 3x0.90=2.70 metre
@ 1.10kg/m =2.97kg
Angle iron 35x35x.5mm for fixing the support frame to Tee- iron suppor
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 1x3.65=3.65m @ 4.50kg/m =16.43kg
Bass plate 100x100x5mm connected to bottom end of vertocal tee.
(0.10x0.10x0.005x7850kg =0.39kg, total = 2.97 + 0.26 + 16.43 + 0.39
Add wastage @ 5% = 1.00, total = 20.05 + 1.00 = 21.05kg
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
9999 Cost of material for drilling holes, nut bolts & r 2.12 L.S.
Painting with synthetic enamel paint on Angle iron .
support frame 25x25x3mm
=1x2.7x0.10=0.27 sqm.
Angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Tee 50x50x6mm
=1x3.65x0.20 =0.73sqm
Base plate to be welded at bottom end of Tee 100x100x5mm
0.022 sqm
Total = 1.036 sqm
Painting with epoxy paint on back side of aluminium sheet. 0.35 sqm
9999 Sundries & hold fast etc. 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost of 1 board.
Say
16.59.1 16.6 Manufacturing, supplying and fixing retro reflective overhead signage boards
made up ofinformatory
16.60.1 Overhead 2 mm thickroad
aluminium
signage sheet, face to be fully covered with high
Details of cost for boards area 3.00x1.20=3.60 sqm
Total = 20.16 + 1.01 = 21.17 kg.
high itensity sheet for written matter.
Taking 40% 3.60x40% = 1.44 sqm.
Total = 3.60 + 1.44 = 5.04 sqm.
for peripheries = 2x(300+120)/30=28 nos.
For vertical Rows = 2x (120/30-2)=4 nos.
Total= 28 + 4 = 32nos.
For wastage @ 5% =2 nos.
Total = 32 +2 = 34 nos.
Labour charges for drilling holes
9999 Hire charges of drill machine and sundries 2.12 L.S.
9999 Hoisting board 2.12 L.S.
Labour charges for manufacturing of board including .
9999 fixing retro reflective sheet 2.12 L.S.
Painting with epoxy paint on back side of Aluminium sheet,
Total
TOTAL
TOTAL
TOTAL
Cost of 3.60 sqm
Cost of 1 sqm.
Say
16.6 16.61 Providing Retro-reflective regulatory sign board of size 900 mm dia meter made
Code out of 2 mm thick aluminium sheet, face toRate
Description be fully coveredUnit
with high intensity
Details cost for one board of 0.635 sqm
Aluminium sheet 2mm thick = 0.635 sqm.
Add 10% wastage = 0.06 sqm, total = 0.635 + 0.06 = 0.695 sqm.
Say 0.70 sqm @ 5.6kg/sqm = 3.98 kg
High intensity retro reflective sheet = 0.70 sqm
high intensity sheet for lettering/ sing and border etc.
Taking 40% Area=0.28 sqm, total = 0.70 + 0.28 = 0.98 sqm.
Angle iron 40x40x4mm = 4x0.60=2.40@ 2.4kg/ mtr = 5.76 kg
50x50x5 mm = 2x4m =8m @ 3kg/ mtr =24.00 kg
Total = 5.76 + 24.00 = 29.76 kg
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
9999 Cost of material for drilling holes, nut bolts & 2.12 L.S.
(e) Painting with synthetic enamel paint
1x2.40.12=0.29 sqm
1x4.00x0.12=0.80 sqm,
Total = 0.29 + 0.80 = 1.09 sqm
13.52.1 Painting with epoxy paint on back side of alum 201.7 sqm
9999 Sundries & hole fast etc, 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 1 board
Say
16.61 16.62 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of
Code specified shade/ colour using hot thermoplastic
Description Rate material byUnit
fully/ semi automatic
Details of cost for 200 sqm (Area covered on one day):-
MATERIAL
Thermoplastic paint screeded in paint form for 2.5 mm thick road making
200 sqm @ 5kg/ sqm = 1000 kg
Wastage @ 5% = 50kg
Total = 1050 kg
8687 Thermoplastic paint 66 kg
Glass beads (B-class) to be sprayed over the paint stripe @ 250 gms
8688 Glass beads 72 kg
MACHINERY
33 Paint applicator. 800 day
83 Hire charges of TATA 407 or equivalent for lo 1400 Day
1241 Commercial LPG in cylinder. 84 kg
LABOUR
157 Operator (Pile/ Special machine) 784 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 200 sqm
Cost per sqm
Say
16.62 16.63 Providing, laying and making kerb channel 30 cm wide and 50 mm thick with
Code cement concrete 1:3:6 (1 cement: 3 coarse Rate
Description sand:6 graded stone
Unit aggregate 20
Meterials
Labour for spreading, ramming and consolidation.
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Cement concrete-1:3:6
4.1.6 Rate as per item no 4.1.6 of SH : Concrete W 6670.25 cum
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.63 16.64 Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40
Code mm thick nominal size including spreading,Rate
Description well ramming, consolidating
Unit and
Meterials
Labour for spreading, ramming and consolidation.
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.64 16.65 Providing and fixing post delineators made of ABS round body fitted with 2 nos
Code 100 mm dia high reflective reflectors and mounted
Description Rate on MS pipe
Unitof 65 mm dia duly
MATERIAL
8685 Delineator 336 each
9999 Fixing materials. 2.12 L.S.
9999 Fixing charges. 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost of 1 no.
Say
16.65.1 16.66 Excavating holes upto 0.10 cum, including getting out the excavated soil, then
returning
16.66.1 All kind ofthe
soilsoil as deported in layers not exceeding 20 cm in depth, including
Earth work 30x0.10 = 3.0 cum.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30 holes
Cost of 1 hole
Say
16.66 16.67 Providing and fixing at or near ground level factory made RCC pavement slab of
Code M-30 grade of size 450x450x50 mm, including
Description RatereinforcementUnit
with 6 mm dia M.S.
MATERIAL
8694 Precast pavement slab 450 x 450 x 50 mm (M 145 each
9977 Carriage of slab. 2.12 L.S.
20mm (bed and joints) CM. 1:5 (1 cement: 5

coarse sand)
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm
Say
16.67 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking
Code paver block of M -30 grade made by block making
Description Rate machine Unit
with strong vibratory
MATERIAL
8689 Interlocking C.C. paver block ( 60 mm thick, M 440 sqm
Bedding layer - 50mm thick
=10x0.050=0.50 cum
Laying charges (Bassed on actual observation)
114 Beldar 645 Day
115 Coolie 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10.00 sqm
Cost for 1.00 sqm.
Say
16.68 16.69 Providing and laying at or near ground level factory made kerb stone of M-25
Code grade cement concrete in position to the required
Description Rate line, levelUnit
and curvature,
Details of cost 100 metre i.e. 100x0.375x0.20=7.50 cum.
No. of kerb stones = 100/0.405=247 Nos
Precast C.C. Kerb stone M - 25 =

247x0.40x0.375x0.20=7.41 cum
8686 Precast C.C. Kerb stone M - 25 5600 cum
Mortar 1:3 for fixing joints = 246x1x[(0.115+0.20)/2] x 0.375x0.005 = 0
Labour for fixing of kerb stones
114 Beldar 645 Day
115 Coolie 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost of 7.50 cum
cost for 1 cum.
Say
16.69.1 16.7 Providing and fixing G.I. chain link fabric fencing of required width in mesh size
50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers
16.70.1 Made of G.I. wire of dia 4 mm
MATERIAL
G.I. chain link 50x50 mm mesh = 10.00 sqm.
Total = 10.50 sqm.
8695 Chain link fabric fencing mesh of size 50x50 300 sqm
9977 Carriage. 2.12 L.S.
LABOUR
114 Beldar 645 Day
9999 Sundries including G.I. wire, nuts and bolts a 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.69.2 16.7 Providing and fixing G.I. chain link fabric fencing of required width in mesh size
16.70.2 50x50
Made ofmm including
G.I. strengthening
wire of dia. 4 mm, PVC with 2 mm
coated dia wireouter
to achieve or nuts,
dia bolts andthan
not less washers
5
Code mm in required colour and shade
MATERIAL
G.I. chain link 50x50 mm mesh PVC coated = 10.00 sqm.
Total = 10.50 sqm.
LABOUR
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.7 16.71 Providing and fixing G.I. chain link fabric fencing of required width in mesh size
Code 25x25 mm made of G.I. wire of dia 3 mm including
Description Rate strengthening
Unit with 2 mm dia
MATERIAL
G.I. chain link 25x25 mm mesh = 10.00 sqm.
Total = 10.50 sqm.
LABOUR
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.71 16.72 Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site.
Detail of cost for 2.25 cum
MATERIAL
22.5 cm thick stone (Hard)
1158 Stone for pitching 15 cm x 22.5 cm 600 cum
Carriage by mechanical transport i/c loading unloading and stacking
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.25 cum
Cost for one cum
Say
16.72 16.73 Dry stone pitching 22.5 cm thick laid in courses and required profile with
Code hammer dressed stones having no side less
Description than 15 cm, with
Rate minimum depth of
Unit
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for one sqm
Say
16.73.1 16.74 75 mm thick back filling for pitching including supplying of required materials
and consolidation etc. complete with :
16.74.1 Moorum
MATERIAL
810 Moorum 500 cum
Carriage by mechanical transport i/c loading unloading and stacking
2265 Carriage of Moorum 163.93 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm
Cost per sqm
Say
and consolidation
16.74.2 Stone aggregate 20etc.mmcomplete
nominal with
size :
MATERIAL
100sqm x7.50cm= 7.50 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm
Cost per sqm
Say
and consolidation
16.74.3 Stone aggregate 40etc.mmcomplete
nominal with
size :
MATERIAL
100sqm x7.50cm= 7.50 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm
Cost per sqm
Say
16.74 16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from
Code batching plant. The ready mixed concrete shall
Description Rate be laid and finished
Unit with screed
MATERIAL
Ready mix concrete M 25 = 1.00 cum. i/c placing of concrete, vibrating,
5.37.1 Rate as per Item No.5.37.1 of SH:RCC 9182.85 cum
9999 Operational charges for vacuum dewatering syst 2.12 L.S.
9999 T& P charges i/c consumable power charges, l 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost for 1 cum
Say
16.75 16.76 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C.
Code pavement.
Cement for M-25 mix = 0.410 t
Cement for M - 20 mix = 0.383 t
Difference = 0.027 t
Plasticizer for M- 25 mix = 2.050kg
Plasticizer for M- 20 mix = 1.915 kg
Difference = 0.135 kg
Total
TOTAL
TOTAL
TOTAL
Cost for 1 cum.
Say
16.76 16.77 Scarifying the existing bituminous road surface to a depth of 50 mm and
Code disposal of scarified material within all liftsRate
Description and lead upto 1km
Unit(by mechanical
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
MACHINERY
38 Tractor with ripper attachment. 1200 day
14 Front end loader capacity 1.00 cum 6000 Day
17 Hire and running charges of tipper 3750 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 sqm
Cost for 1 sqm
Say
16.77.1 16.78 Construction of granular sub-base by providing close graded Material

16.78.1 conforming
With material toconforming
specifications, mixing(size
to Grade-I in a mechanical
range 75 mmmix
to plant
0.075 at
mm)OMC, carriage
having CBR
Code Value-30
MATERIAL
Close graded graunlar sub-base material as

per Grading-I of specifications
53mm to 9.5mm @ 50% = 144 cum
9.5 mm to 2.36mm @ 20% = 57 cum
2.36mm below @ 30% = 86.40 cum
59 Wet Mix Plant 60 TPH 950 hour
@75 tonne capacity
70 Generator 100 KVA/125 KVA 300 hour
57 Water Tanker 5 to 6 KL capacity 200 hour
5 km lead with one trip per hour
Tipper 10 tonne capacity( taking lead= 10

Km) =450x10 =4500 t.Km
50 Motor Grader 3.35 metre blade 2400 hour
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say

conforming
16.78.2 With material toconforming
specifications, mixing (size
to Grade-II in a mechanical
range 53 mmmix
toplant
0.075atmm
OMC, carriage
) having
Code CBR Value-25
MATERIAL
per Grading-I of specifications
26.5mm to 9.5mm @ 35% = 100.80 cum
9.5 mm to 2.36mm @ 25% = 72 cum
2.36mm below @ 40% = 115.20 cum
@75 tonne capacity

Km) =450x10 =4500 t.Km
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say

conforming
16.78.3 With material toconforming
specifications, mixing in
to Grade-III a mechanical
(size range 26.5 mix
mm plant at OMC,
to 0.075 mm ) carriage
having
Code CBR Value-20
MATERIAL

per Grading-III of specifications
9.5mm to 4.75mm @ 35% = 100.80 cum
4.75 mm to 2.36mm @ 12.5% = 36.00 cum
2.36mm below @ 52.5% = 151.20 cum
@75 tonne capacity

Km) =450x10 =4500 t.Km
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.78 16.79 Providing, laying, spreading and compacting graded stone aggregate (size range
Code 53 mm to 0.075 mm ) to wet mix macadam (WMM)
Description Rate specification
Unit including
Details of cost for 225 cum (495 tonne)
MATERIAL
Conforming to table ……
45mm to22.4mm @ 30% = 89.10 cum
Qty for 0292,0293,0294,0295 codes =
89.10 / 4 = 22.275 cum
Qty for 2206, 2202 codes = 89.10 /2 = 44.55
cum
22.4 mm to 2.36mm @ 40% = 118.80 cum
Qty for 0294,0295 codes = 118.80 /4 = 29.70

cum
Qty for 1179 code = 118.80 /2 = 59.40 cum
2.36 mm to 75 microon @ 30% = 89.10 cum
Qty for 2903, 2904 codes = 89.10 / 2 = 44.55
cum
@75 tonne capacity

Km) =450x10 =4500 t.Km
65 Paver finisher Mechanical 100 TPH 800 hour
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.79 16.8 Construction of dry lean cement concrete sub base over a prepared sub-grade
Code with coarse and fine aggregate conformingRate
Description to IS:383, the size of coarse
Unit
Details of cost for 450 cum (990 tonne)
MATERIAL
Crushed stone coarse aggregate of 25mm & 12.5 mm nominal sizes grad
Coarse Sand @0.45 m3 per cum of concrete
= 203 cum
Cement @150 Kg. per cum of concrete =
67.50 cum
Qty for 0294,0296 codes = 405 / 2 = 202.50
cum
@75 tonne capacity
66 Batching and Mixing Plant @ 75 cum per hour 2400 hour
65 Paver finisher Mechanical 100 TPH 800 hour
LABOUR
128 Mate 714 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost per cum.
Say
16.8 16.81 Providing and erecting 2.00 metre high temporary barricading at site; each panel
Code of size 2.50mx2.00m made of 40x40x6mm angle
Description Rate iron or 50x50x3mm
Unit hollow MS
MATERIAL
16.81X Rate as per Sub Analysis No.16.81X 46.05 metre
16.81Y Rate as per Sub Analysis No.16.81Y 1452.4 metre
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.5 metre
Cost of 1 metre
Say
16.81 16.82 Taking out existing kerb stones of all types from footpath/ central verge,
Code including removal of mortar etc., disposal of
Description unserviceable Unit
Rate material to the
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 meter
Cost of 1 meter
Say
16.82 16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge,
Code including removal of rubbish etc., disposalRate
Description of unserviceableUnit
material to the
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm
Say
16.83 16.84 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in
Code required line, level, curvature, colour and pattern
Description Rate over and including
Unit 50 mm thick
MATERIAL
Bedding layer 50mm thick
Qty = 10 x 0.05 = 0.50 cum
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
MACHINERY :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm
Say
16.84 16.85 Laying at or near ground level old kerb stones of all types in position to the
Code required line, level and curvature, jointed with
Description Ratecement mortar 1:3 (1 cement : 3
Unit
Details of cost for 100 meter.
MATERIAL
Number of kerb stones = 100 / 0.405 = 247
Nos.
Qty. = 247 x 0.40 x 0.375 x 0.20 = 7.41cum
No. of joints = 247 - 1 = 246 Nos.
Cement Mortar 1:3 for fixing joints = 246 x [(0.115 + 0.20)/2 x 0.375 x
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
MACHINERY :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 meter.
Cost of 1 meter.
Say
16.85.1 16.86 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and
pre polished
16.86.1 With machine
granite stone cut granite
of area stone
less than 0.50ofsqm.
required size and shape of approved
Detail of cost for 0.5sqm.
MATERIAL
Mirror polished granite 0.5 sqm.

Waste @5% = 0.025 +0.5 = 0.525 sqm.
LABOUR :
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.5 sqm
Cost per sqm.
Say
16.86.1 16.87 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and
pre polished
16.87.1 With machine
granite stone cut granite
of area stone
less than 0.50ofsqm.
required size and shape of approved
Detail of cost for 0.50 sqm.
MATERIAL
Mirror polished granite 0.50 sqm.

Waste @5% total = 0.025 +0.50 = 0.525
sqm.
7296 Granite stone slab 30mm thick 1900 sqm
LABOUR :
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.5 sqm
Cost per sqm.
Say
16.87 16.88 Providing and laying matt finished vitrified tile of size 100x100x16mm having
Code water absorption less than 0.5% and conforming
Description Rate to IS: 15622 of approved make
Unit
Detail of cost for 1 sqm.

Material
Matt finished vitrified tile 100x100 x16mm
=10sqm.
7895 Matt finished vitrified tile 100x100 x16mm 910 sqm
LABOUR :
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per sqm.
Say
16.88 16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having
Code with water absorption less than 0.5% and conforming
Description Rate to IS: Unit
15622 of approved

Material
Tile 300x300 x9.8mm = 1.00 sqm.
7896 Vitrified tile 450 sqm
LABOUR :
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per sqm.
Say
16.89 16.9 Providing and laying tactile tile (for vision impaired persons as per standards) of
Code size 300x300x9.8mm having with water absorption
Description Rate less thanUnit
0.5% and

MATERIAL:
Tile 300x300 x9.8mm = 1.00 sqm.
7893 Tactile tile 800 sqm
LABOUR :
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cosr per sqm
Say
16.90.1 16.91 Providing and laying factory made chamfered edge Cement Concrete paver
blocksthick
16.91.1 60mm in footpath,
cementparks, lawns,
concrete drive
paver ways
block or light
of M-35 traffic
grade parking
with etc, colour,
approved of
Code design &
Descriptionpattern. Rate Unit
MATERIALS :
7773 Coloured inter locking C.C. paver Block 425 sqm
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
16.90.2 16.91 Providing and laying factory made chamfered edge Cement Concrete paver
blocks
16.91.2 80 mm in footpath,
thick parks,
C.C. paver lawns,
block drivegrade
of M-30 ways with
or light traffic parking
approved etc, ofand
color design
Code pattern.
MATERIALS :
8785 Interlocking C.C. paver block ( 80 mm thick, M 485 sqm
982 Coarse sand (zone 111) (10 x 0.050 = 0.50 c 1500 cum
2261 Carriage of Fine sand 163.93 cum
Labour for Laying
114 Beldar 645 day
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
16.91 16.92 Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel
Code dressed on top, for paving in floors, drainsRate
Description etc. laid over 20mm
Unit thick base mortar
MATERIALS :
Stone size 10x10x7.50cm =1sqm+5%

wastage=sqm
7774 Stone size 10x10x7.50cm 9 each
LABOUR :
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
16.92 16.93 Providing and placing in position 100 mm thick factory made machine batched &
Code machine mixed Precast RCC Rectangular Covers
Description Rate on drains Unit
of footpath of various
Details of cost of 1 No of size 1.50 x 0.40 = 0.60 sqm
MATERIALS :
Precast RCC M-25
5.33.1.1 Rate as per Item No.5.33.1 of SH:REIN 8683.8 cum
Reinforcement TMT
5.22.6 Rate as per Item No.5.22.6 of SH:REIN 89.65 Kg
Welding by gas plant/ Electric plant
10.22 Rate as per Item No.10.22 of SH:S T E E L W 3.4 cm
M.S. sheet 1.60 mm thick
2x(1.50+0.40)x0.10x0.016x7850=4.77kg
Paint 2x(1.50+0.40)x0.10=0.38sqm
Neat Cement Punning
1x1.50x0.40=0.60 sqm
13.18 Rate as per Item No.13.18 of SH:F I N I S H I 67.8 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.60 sqm.
Cost of 1 sqm.
Say
16.93 16.94 Providing & making Gabion structure with Mechanically Woven Double Twisted
Code Hexagonal Shaped Wire mesh Gabion Boxes
Description as per IS 16014:2012,MORTH
Rate Unit
Details cost of one Gabion box/Crates of size 2mx1mx1m = 2 cum
MATERIAL
8576 Crates made of Mesh type 10x12 (D=100 mm) 200 sqm
Surface area required = 11.00 sqm.
7753 Stone boulder with least dimension 200mm 810 cum
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
Rate Unit
MATERIAL
8577 Crates made of Mesh type 10x12 (D=100 mm 250 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
Rate Unit
MATERIAL
8578 Crates made of Mesh type 10x12 (D=100 mm) 290 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
17.1.1 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100
mm sand
17.1.1 White cast Iron
Vitreous P or
china S trap,
Orissa 10 litre
pattern lowpan
W.C. level
ofwhite P.V.C. flushing
size 580x440 mm withcistern,
integral
Code type foot rests
Details of cost for one pan
MATERIAL
1954 Vitreous china orrisa type w.c. pan size 580 1290 each
7358 Flushing Cistern P.V.C. 10 lts capacity (low lev 575 each
1896 100 mm S.C.I. trap with vent heel 325 each
9999 Cement, sand and grit etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
17.1.2 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100
mm sand Steel
17.1.2 Stainless cast Iron P or S trap,Orissa
AISI-304(18/8) 10 litrepattern
low level white
W.C. panP.V.C.
of sizeflushing
585x480cistern,
mm with
Code flush pipe and integrated type foot rests Rate
Description Unit
MATERIAL
7805 Salem Stainless steel AISI - 304 (18/8) Orr 4500 each
1896 100 mm S.C.I. trap with vent heel 325 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
17.2.1 17.2 Providing and fixing white vitreous china pedestal type water closet (European
type W.C.
17.2.1 W.C. pan)ISI
pan with with seat and
marked lid,solid
white 10 litre low level
plastic white
seat and lidP.V.C. flushing cistern,
MATERIAL
1875 White plastic seat (solid)with lid C.P.brass hi 410 each
1955 Vitreous china pedestal type water closet 1025 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
type W.C.
17.2.2 W.C. pan)ISI
pan with with seat and
marked blacklid,solid
10 litre low level
plastic white
seat and lidP.V.C. flushing cistern,
MATERIAL
1876 Black plastic seat (solid) with lid C.P.brass h 325 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
type) pan
17.3.1 W.C. withwith
seatISI
and lid, 10 white
marked litre low level
solid whiteseat
plastic vitreous china flushing cistern &
and lid
MATERIAL
7006 Vitreous china 10 litres low level cistern with fi 1200 each
9999 Overflow arrangement and specials for oveflo 2.12 L.S.
1350 Mosquito proof coupling of approved design 30 each
9999 Plugs ,screws etc. 2.12 L.S.
9999 Red lead, white lead and gaskit 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
type) pan
17.3.2 W.C. withwith
seatISI
and lid, 10 black
marked litre low level
solid whiteseat
plastic vitreous china flushing cistern &
and lid
MATERIAL
9999 Overflow arrangement and specials for oveflo 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
17.4.1 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped
17.4.1 Onefronturinal
urinalbasin
basinwith
of 430x260x350
5 litre white mm and
P.V.C. 340x410x265
automatic mm cistern
flushing sizes respectively
Details of cost for one no
MATERIAL
1913 Vitros china lipped front urinal 470 each
7359 P.V.C. automatic flushing cistern 5 lts capacit 450 each
7375 G.I. flush pipe and C.P. brass spreader includ 445 each
9999 Painting of fittings etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
front urinal
17.4.2 Range basin
of two of basins
urinal 430x260x350
with 5 mm
litre and 340x410x265
white mm sizes
P.V.C. automatic respectively
flushing cistern
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
front urinal
17.4.3 Range basin
of three of 430x260x350
urinal mm and
basins with 10litre 340x410x265
white mm sizes
flushing cistern
MATERIAL
7361 P.V.C. automatic flushing cistern 10 lts capaci 500 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
front urinal
17.4.4 Range basin
of four of 430x260x350
urinal mm
basins with 10 and
litre 340x410x265
white mm sizes
flushing cistern
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
17.5.1 17.5 Providing and fixing white vitreous china flat back half stall urinal of size
580x380x350
17.5.1 Single mm
half stall with with
urinal white5 PVC automatic
litre P.V.C. flushing
automatic cistern,
flushing with fittings,
cistern
MATERIAL
7379 White vitreous china clay half stall urinal f 865 each
1532 Flush pipe with union spreaders and clamps all 310 each
1891 C.I. trap for standard urinal with vent arm wi 190 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
580x380x350
17.5.2 Range of two mm
half with
stall white PVC
urinals automatic
with flushing
5 litre P.V.C. cistern,
automatic with fittings,
flushing cistern
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
580x380x350
17.5.3 Range mm
of three with
half white
stall PVCwith
urinals automatic
10 litre flushing cistern, with
P.V.C. automatic fittings,
flushing cistern
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
580x380x350
17.5.4 Range of fourmmhalfwith
stallwhite PVC
urinals automatic
with flushing
10 litre P.V.C. cistern,flushing
automatic with fittings,
cistern
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
17.6.1 17.6 Providing and fixing one piece construction white vitreous china squatting plate
with ansquatting
17.6.1 Single integral longitudinal
plate with 5 flushing pipe,
litre P.V.C. white P.V.C.
automatic automatic
flushing cisternflushing
MATERIAL
1915 Vitros china squatting plate urinal 1053 each
1540 Flush pipe and spreaders G.I.for single set of 190 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with anof
17.6.2 Range integral longitudinal
two squatting flushing
plates pipe,P.V.C.
with 5 litre whiteautomatic
P.V.C. automatic
flushingflushing
cistern
MATERIAL
1541 Flush pipe and spreaders G.I.for range of two 275 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with anof
three squatting flushing
plates pipe,
with 10 litrewhite P.V.C.
P.V.C. automatic
automatic flushing
flushing cistern
MATERIAL
1542 Flush pipe and spreaders G.I.for range of three 310 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with anof
four squatting flushing
plates with 10pipe,
litre white
P.V.C.P.V.C. automatic
automatic flushing
flushing cistern
MATERIAL
1543 Flush pipe and spreaders G.I.for range of four 450 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
17.7.1 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,
32 mmVitreous
17.7.1 White C.P. brass waste
China of standard
Wash pattern,
basin size 630x450including
mm with painting of15
a pair of fittings and
mm C.P.
Code brass pillar taps
MATERIAL
1947 Vitreous china flat back wash basin 630x450 725 each
1885 15 mm C.P.brass tap 270 each
1951 C.P. brass waste 32 mm 85 each
1309 C.I. bracket for wash basin and sinks 88 pair
9999 Painting of brackets, fittings etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
17.7.2 32 mmVitreous
White C.P. brass waste
China of standard
Wash pattern,
mm with painting
a singleof15
fittings and
mm C.P.
Code brass pillar tap
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
China of standard
Wash pattern,
mm with painting of15
a pair of fittings and
mm C.P.
Code brass pillar taps
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
32 mmVitreous
China Flatofback
standard
washpattern, including
basin size painting
550x 400 mm withof fittings
single 15and
mm
Code C.P. brass
Description pillar tap Rate Unit
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
32 mmVitreous
China of standard
Angle pattern,
back wash basinincluding
size 600 xpainting
480 mmof fittings
with and
single
15mm C.P. brass pillar tap
MATERIAL
1949 Vitreous china angle back wash basin 600x4 725 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
32 mmVitreous
China of standard
Angle pattern,
back wash basinincluding
size 400 xpainting
400 mmof fittings
with and
single 15
Code mm C.P. brass pillar tap
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
32 mmVitreous
China Flatofback
standard
washpattern, including
basin size painting
450x 300 mm withof fittings and
single 15mm
Code C.P. brass pillar tap
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
China of standard
Surgeon pattern,
type wash including
basin painting of
of size 660x460 mm fittings
with aand
pair of
Code 15 mm C.P. brass pillar taps with elbow including
Description Rate operated Unitlevers
MATERIAL
3213 Vitreous china Surgeon type wash basin of s 1100 each
7363 15 mm C.P. brass tap with elbow operation le 430 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
China of standard
Surgeon pattern,
type wash including
basin painting of
of size 660x460 mm fittings and
with single
Code 15 mm C.P. brass pillar taps with elbow operated
Description Rate levers ISI Unit
Marked
MATERIAL
7363 15 mm C.P. brass tap with elbow operation le 430 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
32 mm C.P.
17.7.10 Stainless brass
Steel waste of standard
AISI-304(18/8) Round pattern, including
basin 405x355 mmpainting of fittings
with single 15 mmand
C.P.
Code brass pillar
Description tap Rate Unit
MATERIAL
7806 Salem Stainless steel AISI - 304 (18/8) Ro 1500 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
32 mm C.P.
17.7.11 Stainless brass
Steel waste of standard
AISI-304(18/8) pattern,
Wash basin including
530x345 mm painting of fittings
with single 15 mm and
C.P.
Code brass pillar
Description tap Rate Unit
MATERIAL
7807 Salem Stainless steel AISI - 304 (18/8) Wa 2000 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
17.8 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single
Code hole basin mixer of approved quality and make,
Description Rate including painting
Unit of fittings and
Details of cost for 1 no
MATERIAL
9001 C.P. Brass Centre Hole Basin Mixer With Cas 1600 each
9999 Cement, Sand and grit etc. 2.12 L.S.
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.9 17.7B Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32
Code mm PTMT waste coupling of standard pattern,
Description Rate including painting
Unit of fittings and
MATERIAL
7406 PTMT pillar cock 115 each
7491 PTMT - Waste Coupling 31/32 mm 34 each
9999 Red Lead, White Lead and Gasket 2.12 L.S.
9999 Cement, sand and grit etc 2.12 L.S.
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each
Say
17.1 17.8 Providing and fixing white vitreous china pedestal for wash basin completely
Code recessed at the back for the reception of pipes
Description Rate and fittings. Unit
Details of cost for one pedestal
MATERIAL
1396 Vitrous china pedestal for wash basin 950 each
9999 White cement mortar 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
17.11.1 17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber
plug, 40
17.9.1 White mm C.P.
glazed brass
fire clay waste sink
kitchen complete,
of sizeincluding
600x450xpainting
250 mmthe fittings and
MATERIAL
1863 Fire clay kitchen sink: 600x450x250 mm 1300 each
9999 Painting brackets etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
17.12.1.1 17.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983
with C.I. sink
17.10.1 Kitchen brackets and stainless
with drain board steel plug 40 mm, including painting of fittings
17.10.1.1510x1040 mm bowl depth 250 mm
MATERIAL
7095 Stainless steel kitchen sink - with drain boar 3000 each
9999 Painting of brackets etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with C.I. sink
17.10.1.2510x1040 mm bowl depth 225 mm
MATERIAL
7096 Stainlees steel kitchen sink - with drain bo 3500 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with C.I. sink
17.10.1.3510x1040 mm bowl depth 200 mm
MATERIAL
7097 Stainlees steel kitchen sink - with drain bo 3200 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with C.I. sink
17.10.1.4510x1040 mm bowl depth 178 mm
MATERIAL
7098 Stainless steel kitchen sink - with drain bo 3000 each
9999 Painting brackets 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with C.I. sink
17.10.2 Kitchen brackets anddrain
without stainless
boardsteel plug 40 mm, including painting of fittings
17.10.2.1610x510 mm bowl depth 200 mm
MATERIAL
7101 Stainless steel kitchen sink - without drain 2200 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with C.I. sink
without stainless
17.10.2.2610x460 mm bowl depth 200 mm
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
with C.I. sink
without stainless
17.10.2.3470x420 mm bowl depth 178 mm
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one no
Say
17.13.1 17.11 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P.
brass450x300x150
17.11.1 Size chain with rubber
mm plug, 40 mm C.P brass waste and 40mm C.P. brass trap
MATERIAL
1871 White vitreous china laboratry sink450x300x 1500 each
1895 C.P.brass trap40 mm dia 315 each
3617 C.P.brass union 40 mm dia 210 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.13.2 17.11 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P.
brass600x450x200
17.11.2 Size chain with rubber
mm plug, 40 mm C.P brass waste and 40mm C.P. brass trap
MATERIAL
1895 C.P.brass trap40 mm dia 315 each
3617 C.P.brass union 40 mm dia 210 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.14.1 17.12 Providing and fixing draining board with C.I. brackets including painting of
brackets,
17.12.1 White cutting
glazed and making
fire clay draininggood the
board ofwalls wherever 25
size 600x450x required
mm :
MATERIAL
7364 White glazed fire clay draining board 600x4 500 each
9999 Painting brackets etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.15.1 17.13 Providing and fixing white vitreous china water closet squatting pan (Indian type
:
17.13.1 Long pattern W.C. pan of size 580 mm
MATERIAL
1953 Vitreous china indian type w.c. pan size 580 475 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.15.2 17.13 Providing and fixing white vitreous china water closet squatting pan (Indian type
:
17.13.2 Orissa pattern W.C. pan of size 580x440 mm
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.16.1 17.14 Extra for using coloured W.C. pan instead of white W.C. pan :
17.14.1 Orissa pattern W.C. pan 580x440 mm
MATERIAL
Difference in cost of
7104 Coloured Orissa pattern W.C. pan 580x440 1600 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.17 17.15 Providing and fixing white vitreous china pedestal type (European type/ wash
Code down type) water closet pan.
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.18 17.16 Extra for using coloured pedestal type W.C pan (European type) with low level
Code cistern of same colour instead of white vitreous
Description Rate china W.C pan
Unit and cistern.
MATERIAL
7105 Coloured Pedestal type W.C. pan 580x440 m 850 each
Deduct
7106 Coloured Vitreous china 10 lit. low level cister 1000 each
Deduct
7005 Vitreous china 10 litres low level cistern without 700 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.19 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long
Code with S.S. triangular plate to Eureopean typeRate
Description W.C. of quality Unit
and make as
1313 8 mm dia C.P. Brass/ S.S. Jet with flexible t 200 each
9999 Carriage of material and fixing charges 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No.
Say
17.20.1 17.17 Providing and fixing a pair of white vitreous china foot rests of standard pattern
for squattingmm
17.17.1 250x130x30 pan water closet :
Details of cost for one pair
MATERIAL
9988 Cement, sand including carriage of materials 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pair
Say
17.20.2 17.17 Providing and fixing a pair of white vitreous china foot rests of standard pattern
for squattingmm
17.17.2 250x125x25 pan water closet :
Details of cost for one pair
MATERIAL
9988 Cement, sand including carriage of materials 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pair
Say
17.21.1 17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled
device
17.18.1 10 litre (handle
capacitylever) conforming to IS : 7231, with all fittings and fixtures
- White
MATERIAL
LABOUR
(Considering 1 fitter and 1 beldar can fix 8 cistern in one day)
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cistern
Say
17.21.2 17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled
device
17.18.2 10 litre (handle
capacitylever) conforming to IS : 7231, with all fittings and fixtures
- coloured
MATERIAL
7123 Coloured High density polythylene/ poly propylene 550 each
LABOUR
(Considering 1 fitter and 1 beldar can fix 8 cistern in one day)
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cistern
Say
17.22.1 17.19 Providing and fixing controlled flush, low level cistern made of vitreous china
with
17.19.1 10 all (full
litre fittings complete.
flush) capacity-white
MATERIAL
7126 White Vitreous china 10 lit. (full flush) capacity 700 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cistern
Say
17.22.2 17.19 Providing and fixing controlled flush, low level cistern made of vitreous china
with
17.19.2 10 all (full
litre fittings complete.
flush) capacity-coloured
MATERIAL
7127 Coloured Vitreous china 10 lit. (full flush) capac 1150 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cistern
Say
17.23.1 17.2 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan
complete
17.20.1 White : plastic seat with lid
solid
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
complete
17.20.2 Black : plastic seat with lid
solid
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
complete (other
17.20.3 Coloured : than black & white) solid plastic seat with lid
MATERIAL
7107 Coloured (other than black) solid P.V.C. seat 350 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.24 17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan
MATERIAL
1614 G.I. inlet connection 70 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.25 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make
Code and as per the direction of Engineer-in-charge.
MATERIAL
7121 Bottle Trap (Hindware/ Kingston/ Prima/ Parko 620 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No.
Say
17.26 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality &
Code make as approved by Engineer in charge.Rate
Description (a) 15 mm nominal
Unitdia
MATERIAL
7122 CP Brass Single lever telephonic wall mixe 4500 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No.
Say
17.27 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped
Code front urinal basin of 430x260x350 mm or 340x410x265
Description Rate mm sizes
Unit respectively.
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cistern
Say
17.28 17.24 Providing and fixing white vitreous china squatting plate urinal with integral rim
Code longitudinal flush pipe.
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.29.1 17.25 Providing and fixing white vitreous china wash basin including making all
connections
17.25.1 Flat back wash butbasin
excluding
of sizethe cost ofmm
630x450 fittings :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
connections
17.25.2 Flat back wash butbasin
excluding
550x400 fittings :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
connections
17.25.3 Angle but excluding
back wash the 600x480
basin of size cost of fittings
mm :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
connections
17.25.4 Angle but excluding
back wash the 400x400
basin of size cost of fittings
mm :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
connections
17.25.5 Flat butbasin
back wash excluding
450x300 fittings :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
connections
17.25.6 Surgeon typebut
washexcluding
basin ofthe cost
size of fittings
660x460 mm :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.30.1 17.26 Providing and fixing kitchen sink including making all connections excluding
cost ofglazed
17.26.1 White fittings.
fire clay sink of size 600x450x250 mm
MATERIAL
1863 Fire clay kitchen sink: 600x450x250 mm 1300 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.31.1 17.27 Providing and fixing white vitreous china laboratory sink including making all
connections
17.27.1 Size excluding
450x300x150 mm cost of fittings :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.31.2 17.27 Providing and fixing white vitreous china laboratory sink including making all
connections
17.27.2 Size excluding
600x450x200 mm cost of fittings :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.32.1.1 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
wasterigid
17.28.1 Semi fittings
pipecomplete.
17.28.1.132 mm dia
MATERIAL
7117 Semi Rigid PVC waste pipe for sink and wash b 25 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
wasterigid
17.28.1 Semi fittings
pipecomplete.
17.28.1.240 mm dia
MATERIAL
7118 Semi Rigid PVC waste pipe for sink and wash b 33 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
waste fittings
17.28.2 Flexible pipe complete.
17.28.2.132 mm dia
MATERIAL
7119 Flexible (coil shaped) PVC waste pipe for sin 35 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
waste fittings
17.28.2 Flexible pipe complete.
17.28.2.240 mm dia
MATERIAL
7120 Flexible (coil shaped) PVC waste pipe for sin 35 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.33 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap.
MATERIAL
1369 S.C.I. gully or nahani grating 100 mm dia 25 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.34 17.3 Providing and fixing in position 25 mm diameter mosquito proof coupling of
Code approved municipal design.
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
17.35 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of
Code approved quality) complete with 6 mm thick
Description hard board ground
Rate Unit fixed to wooden
Details of cost of one no.
MATERIAL
1392 Mirror of superior make glass 60x45 cm 450 each
7116 Hard board 6 mm thick 115 sqm
600x450 mm
Wooden cleats
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (1398.57 - 142) = 1
Cost of one no.
Say
17.36.1 17.32 Providing and fixing mirror of superior glass (of approved quality) and of
required shape
17.32.1 Circular shape 450
andmmsizedia
with plastic moulded frame of approved make and shade
Details of cost for one no.
MATERIAL
7112 Circular shape 450 mm dia Mirror with Plasti 400 each
Hard board 0.45x0.45 = 0.2025 sqm
= 0.2228 sqm say 0.22sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
required shape
17.32.2 Rectangular and453x357
shape size withmm
plastic moulded frame of approved make and shade
MATERIAL
7113 Rectangular shape 453x357 mm Mirror with P 290 each
Hard board 0.453x0.357 = 0.1617 sqm
= 0.1779 sqm say 0.18 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
required
17.32.3 Oval shape
shape and size
450x350 mm with plastic
(outer moulded frame of approved make and shade
dimensions)
MATERIAL
7114 Ovel shape 450x350 mm (outer dimensions) Mi 290 each
Hard board 0.45x0.35=0.1575 sqm
= 0.1733 sqm say 0.17 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
required shape
17.32.4 Rectangular and1500x450
shape size with plastic
mm moulded frame of approved make and shade
MATERIAL
7115 Rectangular shape 1500x450 mm Mirror with 670 each
Hard board 1.50x0.45 = 0.675 sqm
= 0.7425 sqm say 0.74sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
17.37 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported
Code on anodised aluminium angle frame with C.P.
Description brass brackets
Rate and guard rail
Unit
MATERIAL
3228 600x120 mm glass shelf with anodised alumini 300 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
17.38.1 17.34 Providing and fixing toilet paper holder :

17.34.1 C.P. brass
MATERIAL
1889 C.P.brass toilet paper holder of standard size 280 each
Wooden cleats
LABOUR
114 Beldar 645 Day
TOTAL
Add 1 % for water charges on all except (A) i.e. on (526.77 - 71) = 45
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
17.38.2 17.34 Providing and fixing toilet paper holder :

17.34.2 Vitreous china
MATERIAL
3749 Vitreous china toilet paper holder of standard 110 each
Wooden cleats
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
17.39.1.1 17.35 Providing and fixing soil, waste and vent pipes :
17.35.1 100 mm dia
17.35.1.1Sand cast iron S&S pipe as per IS: 1729
(1.8mx10)-(9x0.07m) = 17.37 m
MATERIAL
1617 S.C.I. soil, waste and vent single socketed p 1135 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 17.37 m pan
Cost per metre
Say
17.35.1 100 mm dia
17.35.1.2Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
(1.75mx10)-(9x0.07m) = 16.87 m
MATERIAL
3620 C.C.I.(spun) socketed soil, waste and vent p 1170 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per metre
Say
17.35.1 100 mm dia
17.35.1.3Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
Code IS:15905
Detail of cost for 18.00 m (6 x 3.00 m)
MATERIAL
7621 Hubless centrifugally cast (spun) iron pipes 700 metre
i/c (3% wastage)
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 18.00 metre
Cost of 1 metre
Say
17.35.2 75 mm diameter :
17.35.2.1Sand cast iron S&S pipe as per IS: 1729
(1.8mx10)-(9x0.065m) = 17.415 m say 17.42 m
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per metre
Say
17.35.2.2Centrifugally cast (spun) iron socketed pipe as per IS: 3989
(1.75mx10)-(9x0.065m) = 16.915 m say 16.92 m
MATERIAL
3621 C.C.I.(spun) socketed soil, waste and vent p 1150 each
including 5% allowance for wastage
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost per metre
Say
Code IS:15905
Detail of cost for 18.00 m (6 x 3.00 m)
MATERIAL
7622 Hubless centrifugally cast (spun) iron pipes 570 metre
i/c (3% wastage)
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 18.00 metre
Cost of 1 metre
Say
17.40.1 17.36 Providing and filling the joints with spun yarn, cement slurry and cement mortar
1:2mm
17.36.1 75 ( 1 cement
dia pipe: 2 fine sand) in S.C.I./ C.I. Pipes :
Details of cost for 4 joints
MATERIAL
9999 Cement mortar, spun yarn etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 4 joints
Cost for 1 joint
Say
17.40.2 17.36 Providing and filling the joints with spun yarn, cement slurry and cement mortar
1:2 (mm
17.36.2 100 1 cement
dia pipe: 2 fine sand) in S.C.I./ C.I. Pipes :
MATERIAL
9999 Cement mortar, spun yarn etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 4 joints
Cost for 1 joint
Say
17.41.1 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast
iron/cast
17.37.1 For 100 mmirondia
(spun)
pipe pipe embedded in and including cement concrete blocks
MATERIAL
1331 M.S.Holder bat clamp of approved design for 30 each
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 bat clamp
Say
17.41.2 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast
iron/cast
17.37.2 For 75 mm iron
dia(spun)
pipe pipe embedded in and including cement concrete blocks
MATERIAL
1332 M.S.Holder bat clamp of approved design for7 27 each
LABOUR
114 Beldar 645 Day
C.C. Black 5x0.1x0.1x0.1 = 0.005 cum
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 bat clamp
Say
17.42.1.1 17.38 Providing and fixing bend of required degree with access door, insertion rubber
washer
17.38.1 100 mm3dia mm thick, bolts and nuts complete.
17.38.1.1Sand cast iron S&S as per IS - 1729
MATERIAL
1625 S.C.I. bend with access door 100mm dia 350 each
1374 Rubber insertions for 100 mm dia pipe joints 18 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
washer
MATERIAL
3624 S.C.I. S&S bends with access door100mm dia 400 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
washer
17.38.1.3Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
Code IS:15905
MATERIAL
7639 Hubless centrifugally cast (spun) iron bend w 365 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
washer
17.38.2 75 mm dia3 mm thick, bolts and nuts complete.
MATERIAL
1624 S.C.I. bend with access door 75mm dia 290 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
washer
17.38.2.2Sand cast iron S&S as per IS- 3989
MATERIAL
3625 S.C.I. S&S bends with access door75mm dia 300 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
washer
Code IS:15905
MATERIAL
7640 Hubless centrifugally cast (spun) iron bend wi 290 each
3mm thick
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.43.1.1 17.39 Providing and fixing plain bend of required degree.
17.39.1 100 mm dia
MATERIAL
1621 S.C.I. plain bend 100 mm dia 280 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say

17.39.1 100 mm dia
17.39.1.2Sand cast iron S&S as per IS : 3989
MATERIAL
3628 S.C.I. S&S bend100mm dia 300 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say

17.39.1 100 mm dia
Code IS:15905
MATERIAL
7623 Hubless centrifugally cast (spun) iron plain 230 each
100 mm dia
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say

17.39.2 75 mm dia
17.39.2.1Sand cast iron S&S as per IS -1729
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say

17.39.2 75 mm dia
MATERIAL
3629 S.C.I. S&S bend75mm dia 200 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say

17.39.2 75 mm dia
Code IS:15905
MATERIAL
7624 Hubless centrifugally cast (spun) iron plain b 160 each
75 mm dia
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.44.1.1 17.4 Providing and fixing heel rest sanitary bend

17.40.1 100 mm dia
MATERIAL
1667 Sand cast iron heel rest bend 100mm dia 355 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
17.40.1 100 mm dia
MATERIAL
3634 S.C.I. S&S heel rest sanitary bend 100mm dia 300 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say

17.40.2 75 mm dia
MATERIAL
1666 Sand cast iron heel rest bend75mm dia 300 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say

17.40.2 75 mm dia
MATERIAL
3635 S.C.I. S&S heel rest sanitary bend 75mm dia 280 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
17.45.1.1 17.41 Providing and fixing double equal junction of required degree with access door,
insertion rubber washer
17.41.1 100x100x100x100 mm 3 mm thick, bolts and nuts complete :
MATERIAL
1637 S.C.I. double equal junctions 100x100x100x1 730 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
insertion rubber washer
17.41.1 100x100x100x100 mm 3 mm thick, bolts and nuts complete :
MATERIAL
3654 S.C.I. S&S double equal junctions with acc 630 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
insertion rubber
17.41.2 75x75x75x75 mmwasher 3 mm thick, bolts and nuts complete :
MATERIAL
1636 S.C.I. double equal junctions75x75x75x75 mm 525 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
insertion rubber
17.41.2 75x75x75x75 mmwasher 3 mm thick, bolts and nuts complete :
MATERIAL
3655 S.C.I. S&S double equal junctions with acce 500 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.46.1.1 17.42 Providing and fixing double equal plain junction of required degree.
17.42.1 100x100x100x100 mm
MATERIAL
1634 S.C.I. plain double equal junctions100x100x 615 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.42.1 100x100x100x100 mm
MATERIAL
3650 S.C.I. S&S double equal junctions100x100x 630 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.42.1 100x100x100x100 mm
Code IS:15905
MATERIAL
7625 Hubless centrifugally cast (spun) iron double 510 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.42.2 75x75x75x75 mm
MATERIAL
1633 S.C.I. plain double equal junctions 75x75x75 410 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.42.2 75x75x75x75 mm
MATERIAL
3651 S.C.I. S&S double equal junctions75x75x75 470 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.42.2 75x75x75x75 mm
Code IS:15905
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.47.1.1 17.43 Providing and fixing single equal plain junction of required degree with access
door, insertion
17.43.1 100x100x100 mm rubber washer 3 mm thick, bolts and nuts complete.
MATERIAL
1631 S.C.I. single equal junctions 100x100x100 mm 455 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
door, insertion
MATERIAL
3644 S.C.I. S&S single equal junctions with acc 500 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
door, insertion
MATERIAL
1630 S.C.I. single equal junctions75x75x75 mm dia 390 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
door, insertion
MATERIAL
3645 S.C.I. S&S single equal junctions with acce 390 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.48.1.1 17.44 Providing and fixing single equal plain junction of required degree :
17.44.1 100x100x100 mm
MATERIAL
1628 S.C.I. plain single equal junctions100x100x1 405 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.44.1 100x100x100 mm
MATERIAL
3640 S.C.I. S&S single equal junctions100x100x1 500 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.44.1 100x100x100 mm
Code IS:15905
MATERIAL
7627 Hubless centrifugally cast (spun) iron single 400 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.44.2 75x75x75 mm
MATERIAL
1627 S.C.I. plain single equal junctions75x75x75 m 315 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.44.2 75x75x75 mm
MATERIAL
3641 S.C.I. S&S single equal junctions75x75x75 350 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.44.2 75x75x75 mm
Code IS:15905
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.49.1.1 17.45 Providing and fixing double unequal junction of required degree with access
door, insertion rubber
17.45.1 100x100x75x75 mm washer 3 mm thick, bolts and nuts complete:
MATERIAL
1662 Sand cast iron S&S double unequal junction 725 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.49.1.2 17.45 Providing and fixing double unequal junction of required degree with access
door, insertion rubber
17.45.1 100x100x75x75 mm washer 3 mm thick, bolts and nuts complete:
MATERIAL
3674 S.C.I. S&S double unequal junctions with a 900 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.50.1.1 17.46 Providing and fixing double unequal plain junction of required degree :
17.46.1 100x100x75x75 mm
MATERIAL
1659 Sand cast iron S&S plain double unequal jun 625 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.46.1 100x100x75x75 mm
MATERIAL
3670 S.C.I. S&S double unequal junctions100x10 800 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.46.1 100x100x75x75 mm
Code IS:15905
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.51.1.1 17.47 Providing and fixing single unequal junction of required degree with access
door, insertion
17.47.1 100x100x75 mmrubber washer 3 mm thick, bolts and nuts complete :
MATERIAL
1656 Sand cast iron S&S single unequal junctions 575 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.51.1.2 17.47 Providing and fixing single unequal junction of required degree with access
door, insertion
17.47.1 100x100x75 mmrubber washer 3 mm thick, bolts and nuts complete :
MATERIAL
3664 S.C.I. S&S single unequal junctions with a 650 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.52.1.1 17.48 Providing and fixing single unequal plain junction of required degree :
17.48.1 100x100x75 mm
MATERIAL
1653 Sand cast iron S&S plain single unequal junc 525 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.48.1 100x100x75 mm
MATERIAL
3660 S.C.I. S&S single unequal junctions100x100 600 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.48.1 100x100x75 mm
Code IS:15905
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.53.1.1 17.49 Providing and fixing double equal plain invert branch of required degree:
17.49.1 100x100x100x100 mm
MATERIAL
1673 S.C.I. double equal invert branch of requir 550 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 invert branch
Say
17.49.1 100x100x100x100 mm
17.49.1.2Sand cast iron S&S as per IS 3989
MATERIAL
3685 S.C.I. S&S double equal invert branch of re 540 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 invert branch
Say
17.49.1 100x100x100x100 mm
Code IS:15905
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.49.2 75x75x75x75 mm
MATERIAL
1672 S.C.I. double equal invert branch of require 425 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one invert branch
Say
17.49.2 75x75x75x75 mm
MATERIAL
3686 S.C.I. S&S double equal invert branch of re 450 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one invert branch
Say
17.54.1.1 17.5 Providing and fixing single equal plain invert branch of required degree :
17.50.1 100x100x100 mm
17.50.1.1Sand cast iron S&S as per iron 1729
MATERIAL
1670 S.C.I. single equal invert branch of require 435 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
17.50.1 100x100x100 mm
MATERIAL
3681 S.C.I. S&S single equal invert branch of req 430 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
17.50.1 100x100x100 mm
Code IS:15905
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.50.2 75x75x75 mm
MATERIAL
1669 S.C.I. single equal invert branch of require 350 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
17.50.2 75x75x75 mm
MATERIAL
3682 S.C.I. S&S single equal invert branch of req 330 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
17.50.2 75x75x75 mm
Code IS:15905
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.55.1.1 17.51 Providing and fixing double unequal invert branch of required degree :
17.51.1 100x100x75x75 mm
MATERIAL
1677 S.C.I. double unequal invert branch of requ 600 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
17.55.1.2 17.51 Providing and fixing double unequal invert branch of required degree :
17.51.1 100x100x75x75 mm
MATERIAL
3695 S.C.I. S&S double unequal invert branch of 730 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
17.56.1.1 17.52 Providing and fixing single unequal plain invert branch of required degree :
17.52.1 100x100x75 mm
MATERIAL
1674 S.C.I. single unequal invert branch of requi 500 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
17.52.1 100x100x75 mm
MATERIAL
3690 S.C.I. S&S single unequal invert branch of 550 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
17.52.1 100x100x75 mm
Code IS:15905
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.57.1.1 17.53 Providing and fixing sand cast iron S&S off sets as per IS: 1729
17.53.1 76 mm off sets
17.53.1.1With 75 mm dia pipe
MATERIAL
3746 S.C.I. S&S, 75 mm offset for 75 mm dia pipe 220 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
MATERIAL
3747 S.C.I. S&S, 75 mm offset for 100 mm dia pipe 360 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.53.2 114 mm off sets
MATERIAL
3712 S.C.I. S&S, 114 mm offset for75 mm dia pipe 310 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.53.2 114 mm off sets
MATERIAL
3713 S.C.I. S&S, 114 mm offset for100 mm dia pip 390 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.53.3 152 mm off sets
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.53.3 152 mm off sets
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.58.1.1 17.53A Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside
& outside
17.53A.1 65 as per IS:15905
mm offsets
17.53A.1.With 100 mm dia pipe
MATERIAL
7635 Hubless centrifugally cast (spun) iron 65 mm 360 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
& outside
17.53A.1 65 as per IS:15905
mm offsets
17.53A.1.With 75 mm dia pipe
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.59.1.1 17.54 Providing and fixing sand cast iron S&S off sets as per IS: 3989 :
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.54.2 150 mm off sets
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.54.2 150 mm off sets
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
& outside
17.54A.1 130 as per IS:15905
mm offsets
17.54A.1.With 100 mm dia
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
& outside
17.54A.1 130 as per IS:15905
mm offsets
17.54A.1.With 75 mm dia
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.61.1.1 17.55 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts
complete
17.55.1 100 mm :
MATERIAL
1683 S.C.I. door pieces 100 mm dia 485 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
complete
17.55.1 100 mm :
MATERIAL
3728 S.C.I. S&S door pieces 100 mm dia 410 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
complete
17.55.2 75 mm :
MATERIAL
1682 S.C.I. door pieces 75 mm dia 285 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
complete
17.55.2 75 mm :
MATERIAL
3729 S.C.I. S&S door pieces 75 mm dia 300 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 junction
Say
17.62.1.1 17.56 Providing and fixing terminal guard :

17.56.1 100 mm
MATERIAL
1640 Slotted cowl (terminal guard ) 100 mm dia 265 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say

17.56.1 100 mm
MATERIAL
3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 1 300 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say

17.56.1 100 mm
Code IS:15905
MATERIAL
7641 Hubless centrifugally cast (spun) iron termina 270 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say

17.56.2 75 mm
MATERIAL
1639 Slotted cowl (terminal guard )75 mm dia 215 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say

17.56.2 75 mm
MATERIAL
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 7 210 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.63.1.1 17.57 Providing and fixing collar :

17.57.1 100 mm
MATERIAL
1686 S.C.I. collar 100 mm dia 270 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say

17.57.1 100 mm
MATERIAL
3738 S.C.I. S&S, collars 100 mm 300 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say

17.57.2 75 mm
MATERIAL
1685 S.C.I. collar 75 mm dia 180 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say

17.57.2 75 mm
MATERIAL
3739 S.C.I. S&S, collars 75 mm 180 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.64.1.1 17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
17.57A.1 100 mm dia
17.57A.1.SS 304 grade coupling with EPDM rubber gasket
MATERIAL
7644 SS 304 grade shielded coupling with EPDM rubb 275 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.64.2.1 17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
17.57A.2 75 mm dia
17.57A.2.SS 304 grade coupling with EPDM rubber gasket
MATERIAL
7645 SS 304 grade shielded coupling with EPDM rubb 250 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.65.1 17.58 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron
pipes
17.58.1 100 mm and fittings of diameter :
Details of cost for one joint
MATERIAL
9999 Kerosene oil, fuel and other sundries 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one joint
Say
pipes
17.58.2 75 mmand fittings of diameter :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one joint
Say
pipes
17.58.3 50 mmand fittings of diameter :
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one joint
Say
17.66.1 17.59 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast
(spun)
17.59.1 100 mmiron pipes of diameter :
MATERIAL
1330 Clamps and M.S. stays including bolts and nu 67.5 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
(spun)
17.59.2 75 mm iron pipes of diameter :
MATERIAL
1335 Clamps and M.S. stays including bolts and nu 37 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
(spun)
17.59.3 50 mm iron pipes of diameter :
MATERIAL
1334 Clamps and M.S. stays including bolts and nu 35 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
17.67.1.1 17.6 Providing and fixing trap of self cleansing design with screwed down or hinged
grating
17.60.1 100 mmwith
inletor
andwithout vent
100 mm arm complete, including cost of cutting and making
outlet
17.60.1.1Sand cast iron S&S as per IS: 3989
MATERIAL
7808 Centrifugally cast (spun) iron S&S 100 mm in 450 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
grating
17.60.1 100 mmwith
inletor
andwithout vent
100 mm arm complete, including cost of cutting and making
outlet
17.60.1.2Sand Cast Iron S&S as per IS: 1729
MATERIAL
1897 100 mm S.C.I. trap with 100 mm inlet and 100 300 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
grating
17.60.1 100 mmwithinletor without
and 100 mmvent arm complete, including cost of cutting and making
outlet
Code IS:15905
MATERIAL
7642 Hubless centrifugally cast (spun) iron trap wi 540 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
grating
17.60.2 100 mmwith
inletor
andwithout
75 mmvent arm complete, including cost of cutting and making
outlet
MATERIAL
7809 Centrifugally cast (spun) iron S&S 100 mm inl 500 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
grating
17.60.2 100 mmwith
inletor
andwithout
75 mmvent arm complete, including cost of cutting and making
outlet
17.60.2.2Sand Cast Iron S&S as per IS- 1729
MATERIAL
1898 100 mm S.C.I. trap with 100 mm inlet and75 m 220 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
grating
17.60.2 100 mmwithinletor without
and 75 mm vent arm complete, including cost of cutting and making
outlet
Code IS:15905
MATERIAL
7643 Hubless centrifugally cast (spun) iron trap wi 385 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
17.68.1 17.61 Cutting chases in brick masonry walls for following diameter sand cast
iron/centrifugally
17.61.1 100 mm dia cast (spun) iron pipes and making good the same with cement
MATERIAL
Cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggr
9999 Plastering in cement mortar 1:4 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one metre
Say
17.61.2 75iron/centrifugally
mm dia cast (spun) iron pipes and making good the same with cement
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one metre
Say
17.61.3 50iron/centrifugally
mm dia cast (spun) iron pipes and making good the same with cement
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one metre
Say
17.69 17.62 Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and
Code white paint over a coat of zinc chromate yellow
Description Rate primer (of approved
Unit quality ) on
Details of cost for one cistern with fittings
MATERIAL
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.7 17.63 Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside
Code and white paint on the outside surface of the
Description cistern, flush pipe,
Rate Unit other fittings,
MATERIAL
9999 Polishing of wooden seat and cleaning of W.C. 2.12 L.S.
9988 Sundries and carriage of materials 2.12 L.S.
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.71 17.64 Repainting C.I. cistern with synthetic enamel paint of approved colour, brand and
Code manufacture on the outside surface of cistern,
Description Rateflush pipe, other
Unit fittings etc.
MATERIAL
9988 Sundries and carriage of materials 2.12 L.S.
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.72.1 17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and
fittings
17.65.1 100 mmwith two coats
diameter pipe of synthetic enamel paint of any colour such as chocolate
MATERIAL
Perimeter = 3.14x110 mm =345.71
Area 10x0.3457 = 3.46 sqm
Priming coat
Painting two coats with paint of any colour such as chocolatem grey or
9999 Add for delay 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
17.72.2 17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and
fittings
17.65.2 75 with two coats
mm diameter pipe of synthetic enamel paint of any colour such as chocolate
MATERIAL
Perimeter = 3.14x82 mm =257.71
Area 10x0.2577 =2.577 sqm say 2.60 sq. m for outer surface
Priming coat
Painting two coats with paint of any colour such as choclate grey or buff
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
17.73.1 17.66 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent
pipes
17.66.1 100 mm and fittings pipe
diameter with one coat of synthetic enamel paint of any colour such as
Painting one coat with paint of any colour such as chocolate, grey or bu
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
17.73.2 17.66 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent
pipes
17.66.2 75 mmand fittingspipe
diameter with one coat of synthetic enamel paint of any colour such as
Painting one coat with paint of any colour such as chocolate,grey or buf
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
17.74 17.67 Repainting bath tub of size 1700x730x430 mm with enamel paint.
Details of cost for one tub
MATERIAL
830 Enamel paint 165 litre
LABOUR
131 Painter 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
17.75.1 17.68 Providing and fixing vitreous china dual purpose closet suitable for use as
17.68.1 squatting pan or
White vitreous European
china type water
dual purpose WCcloset (Anglo
pan with whiteIndian
solidW.C pan)
plastic with
seat seat
and lid&
Code with white vitreous china flushing cistern and
Description RateC.P. flush bend.
Unit
MATERIAL
1965 White vitreous china dual purpose closet (Angl 2500 each
9999 20 mm G.I.over flow pipe and specials for over 2.12 L.S.
9999 Plugs, screws etc. 2.12 L.S.
9999 Red lead, white lead and gaskin etc. 2.12 L.S.
9999 Cement,sand and grit 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
17.76.1 17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved
qualitycoupling
17.69.1 Waste and colour.31 mm dia of 79 mm length and 62mm breadth weighing not less
Code than 45 gms
MATERIAL
7491 PTMT Waste Coupling 31/32MM 34 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.76.2 17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved
qualitycoupling
17.69.2 Waste and colour.
38 mm dia of 83 mm length and 77mm breadth, weighing not less
than 60 gms
MATERIAL
7492 PTMT Waste Coupling 38/40MM 39 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.77.1 17.7 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of
Code tail pipe 260 mm from the centre of the waste
Description coupling, 77 mm
Rate Unitbreadth with 25
MATERIAL
7493 PTMT Bottle Trap 31/32MM 200 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.77.2 17.7 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length
Code of tail pipe 260 mm from the centre of the waste
Description Rate coupling, 77 mm breadth with 25
Unit
MATERIAL
7494 PTMT Bottle Trap 38/40MM 200 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.78 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and
Code 112 mm distance from wall of standard shape
Description Ratewith bracket of the same materials
Unit
MATERIAL
7503 PTMT Liquid Soap Container of 400ml capaci 95 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.79 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm
Code wide with minimum distances of 37 mm from
Description wall face with Unit
Rate concealed fittings
MATERIAL
7504 PTMT - Towel Ring 215x200x37mm 110 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.80.1 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden
17.73.1 cleats
450 mm with
longCPtowel
brass screws
rail withlength
with total concealed fittings
of 495 mm, 78arrangement of approved
mm wide and effective
Code height of
Description88 mm, weighing not less than 170 gms
Rate Unit
MATERIAL
7505 PTMT Towel Rail (450MM) 125 Each
Wooden cleates
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.80.2 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden
17.73.2 cleats
600 mm with
longCPtowel
brass screws
rail withlength
with total concealed fittings
of 645 arrangement
mm, width 78 mm andof approved
effective
Code height of
Description88 mm, weighing not less than 190 gms.
Rate Unit
MATERIAL
7506 PTMT Towel Rail (600MM) 145 Each
Wooden cleates
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.81 17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height
of approved quality and colour, weighing not less than 300 gms.
MATERIAL
7507 PTMT Shelf 450x124x36mm 150 Each
Wooden cleates
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.82 17.75 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2"
Code BSP thread and shapes, weighing not less Rate
Description than 60 gms. Unit
MATERIAL
7508 PTMT Urinal Spreader 15MM 55 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
17.83.1 17.76 Providing and fixing PTMT urinal cock of approved quality and colour.
17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female
Code threads weighing not less than 48 gms
MATERIAL
7858 P.T.M.T. Urinal cock 15mm dia 95 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
17.84.1 17.77 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/
17.77.1 cast
Totaliron (spun)
bracket pipes
length comprising
580 of M.S. shape
mm of approved flat brackets made(for
and design of 50x5 mm
single flat
100 mm of
Code dia pipe)
MATERIAL
M.S. flats 50x5mm 50x0.58= 2.90m
@ 1.97 kg/ metre = 5.71 kg.
M.S. flats 30x1.6mm 5x0.42 = 2.10m.
0.38kg/metre = 0.80kg.
Total = 6.51kg.
Add wastage 5% = 0.33kg.
Total = 6.86 kg.= 0.0686 quintal
LABOUR
114 Beldar 645 Day
priming coat
5x0.58x0.11 = 0.32
5x0.42x0.063 = 0.13
Total=0.45sqm
P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20 nos.
Rate asper item no. 8.8.1.1 of SH :- Marble

work
8.8.1.1 30.75 each
Total
TOTAL
TOTAL
TOTAL
Cost for 5 Nos.
Cost for 1 nos.
Say
17.77.2 cast
Totaliron (spun)
bracket pipes
length comprising
810 of M.S. shape
mm of approved flat brackets made(for
and design of 50x5 mmmm
two 100 flat dia
of
Code pipes)
MATERIAL
M.S. flats 50x5mm 50x0.81= 4.05m
@ 1.97 kg/ metre = 7.98 kg.
M.S. flats 30x1.6mm 5x2x0.42 = 4.20m.
Total = 9.58kg.
Total = 10.06 kg.
M.S.flats 10.06kg. = 0.1006 quintal
LABOUR
114 Beldar 645 Day
priming coat
5x0.81x0.11 = 0.45
5x2x0.42x0.063 = 0.26
Total =0.71sqm

work
8.8.1.1 30.75 each
Total
TOTAL
TOTAL
TOTAL
Cost for 5 Nos.
Cost for 1 nos.
Say
cast iron
17.77.3 Total (spun)
bracket pipes
length comprising
1040 of M.S. flat
mm of approved brackets
shape made of
and design 50x5
(for mm
three flat
100 mmof
Code dia pipes)
MATERIAL
M.S. flats 50x5mm 50x1.04= 5.20m
@ 1.97 kg/ metre = 10.24 kg.
M.S. flats 30x1.6mm 5x3x0.42 = 6.30m.
Total = 12.63kg.
Total = 13.26 kg.
M.S.flats 13.26kg. = 0.1326 quintal
LABOUR
114 Beldar 645 Day
priming coat
5x1.04x0.11 = 0.57
5x3x0.42x0.063 = 0.40
Total=0.97sqm

work
8.8.1.1 30.75 each
Total
TOTAL
TOTAL
TOTAL
Cost for 5 Nos.
Cost for 1 nos.
Say
17.85 17.78 Providing and fixing white vitreous china extended wall mounting water closet of
Code size 780x370x690 mm of approved shape including
Description Rate providing & fixing white
Unit
MATERIAL
7072 Wall mounted water closet 5500 each
7073 Adjustable Vetrious China Cistern with fittings 1600 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
17.86 17.79 Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315
Code mm having antibacterial /germs free ceramic
Description surface, fixed Unit
Rate with cartridge having
MATERIAL
7074 White Vetrious China Waterless Urinal 9000 each
7075 Cistern with fittings for Waterless Urinal 2200 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
17.87 17.8 Providing and fixing white vitreous china battery based infrared sensor operated
Code urinal of approx. size 610 x 390 x 370 mm having
Description Rate pre & postUnit
flushing with water
MATERIAL
7076 White Vetrious Urinal 4500 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 pan
Say
17.88 17.81 Providing and fixing floor mounted, white vitreous china single piece, double
Code traps syphonic water closet of approved brand/make,
Description Rate shape, size and pattern
Unit
MATERIAL
1966 Floor mounted, white vitreous china single piec 9800 each
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of each
Say
18.1.1 18.1 Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite

Pressure
18.1.1 1216 Pipes
(16 mm OD)conforming
pipe to IS - 15450, U.V. stabilized with carbon black having
MATERIALS
8300 1216 mm PE-AL-PE Composit pressure pipe 80 Metre
Add 30% for fittings and wastage etc. on (X)
30 * X / 100
9999 Cement, sand and grit 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Pressure
18.1.2 1620 Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Pressure
18.1.3 2025 Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Pressure
18.1.4 2532 Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Pressure
18.1.5 3240 Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Pressure
18.1.6 4050 Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.2.1 18.2 Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE

Composite
18.2.1 1216 (16 mm Pressure
OD) pipePipes conforming to IS - 15450, U.V. stabilized with carbon
MATERIALS
Add 75% for fittings, clamps and wastage etc. on (X)
75 * X / 100
Making chases upto 7.5 x 7.5 cm. in walls and making good the same
18.78 Rate as per item no. 18.78 of SH: Water Supp 171.8 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Composite
18.2.2 1620 (20 mm Pressure
MATERIALS
75 * X / 100
18.78 Rate as per item no. 18.78 of SH: water Suppl 171.8 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Composite
18.2.3 2025 (25 mm Pressure
MATERIALS
75 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Composite
18.2.4 2532 (32 mm Pressure
MATERIALS
75 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Composite
18.3.1 1216 (16 mm Pressure
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
Trenching and refilling etc.
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Composite
18.3.2 1620 (20 mm Pressure
OD ) pipePipes conforming to IS - 15450, U.V. stabilized with carbon
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Composite
18.3.3 2025 (25 mm Pressure
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Composite
18.3.4 2532 (32 mm Pressure
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Composite
18.3.5 3240 (40 mm Pressure
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say

Composite
18.3.6 4050 (50 mm Pressure
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.4.1 18.4 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes
18.4.1 PN confirming to20mm
- 16 Pipe, IS 15801,
OD UV stabilized & anti - microbial fusion welded, having
(SDR-7.4)
MATERIALS
8626 Poly propylene - Random - Co - Polymer (PPR 48.46 metre
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 16 Pipe, IS 15801,
(SDR-7.4)
MATERIALS
8627 Poly propylene - Random - Co - polymer (PPR 74.82 metre
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 16 Pipe, IS 15801,
(SDR-7.4)
MATERIALS
8628 Poly propylene - Random - Co - poymer (PPR) 107.47 metre
20 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 16 Pipe, IS 15801,
(SDR-7.4)
MATERIALS
8629 Poly propylene - Random - Co - polymer (PPR 162 metre
15 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 10 Pipe, IS 15801,
(SDR-11)
MATERIALS
15 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 16 Pipe, IS:15801,
(SDR-7.4)
MATERIALS
8626 Poly propylene - Random - Co - Polymer (PP 48.46 metre
75 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 16 Pipe, IS:15801,
(SDR-7.4)
MATERIALS
75 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having
18.5.3 PN - 16 Pipe, 32mm OD (SDR-7.4)
MATERIALS
50 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 16 Pipe, IS:15801
ODUV stabilized & anti - microbial fusion welded, having
(SDR-7.4)
MATERIALS
8626 Poly propylene - Random - Co - Polymer (PPR 48.46 metre
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.6.2 PN confirming to25
- 16 Pipe, IS:15801
mm ODUV stabilized & anti - microbial fusion welded, having
(SDR-7.4)
MATERIALS
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 16 Pipe, IS:15801
(SDR-7.4)
MATERIALS
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 16 Pipe, IS:15801
(SDR-7.4)
MATERIALS
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.6.5 PN confirming
- 10 Pipe,to50
IS:15801
(SDR-11)
MATERIALS
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 10 Pipe, IS:15801
(SDR-11)
MATERIALS
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 10 Pipe, IS:15801
(SDR-11)
MATERIALS
8632 Poly propylene - Random - Co - polymer (PP 425 metre
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 10 Pipe, IS:15801
(SDR-11)
MATERIALS
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
- 10 Pipe, IS:15801
mm OD UV(SDR-11)
stabilized & anti - microbial fusion welded, having
MATERIALS
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.6.10 PNconfirming to160
- 10 Pipe, IS:15801
mm OD UV(SDR-11)
stabilized & anti - microbial fusion welded, having
MATERIALS
20 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.7.1 18.6A Providing and fixing PPR Unions

18.6A.1 PPR Union 20mm
MATERIAL
8306 PPR Union 20 mm 60 each
9977 Carriage of material and sundries 2.12 L.S.
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say

MATERIAL
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say

MATERIAL
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say

MATERIAL
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say

MATERIAL
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say

MATERIAL
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say

MATERIAL
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say
18.8.1 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having therma
18.7.1 15 stability for hot &
mm nominal colddia
outer water supply, including all CPVC plain & brass threaded
Pipes
MATERIALS
8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 49 metre
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
mm nominal colddia
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
mm nominal colddia
Pipes
MATERIALS
8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 127.97 metre
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
mm nominal colddia
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
mm nominal colddia
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
mm nominal colddia
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.8.1 15stability for hot &
mm nominal cold
dia water supply, including all CPVC plain & brass threaded
Pipes
MATERIALS
75 * X / 100
18.78 Rate as per item no. 18.78 Of SH: Water Supp 171.8 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
mm nominal diacold water supply, including all CPVC plain & brass threaded
Pipes
MATERIALS
75 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Pipes
MATERIALS
75 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Pipes
MATERIALS
75 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
mm nominal diacold water supply including all CPVC plain & brass threaded
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stability for hot & cold water supply including all CPVC plain & brass threaded
18.9.4 32 mm nominal dia Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.9.9 100stability for hot &dia
mm nominal cold water supply including all CPVC plain & brass threaded
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stability
18.9.10 150 for hot &dia
mm nominal cold water supply including all CPVC plain & brass threaded
Pipes
MATERIALS
30 * X / 100
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.11.1 18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
18.10.1 15andmm
making good the
dia nominal walls etc. Internal work - Exposed on wall
bore
MATERIALS
Weight for carriage = pipe weight + 15% for

fiitings =
1.15 * 12.30 = 14.145 kg = 0.014145 tonne
9999 White lead, hemp, oil etc. 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.10.2 20andmm
making good the
bore
MATERIALS

fiitings =
1.15 * 15.90= 18.285 kg = 0.018285 tonne
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.10.3 25andmm
making good the
bore
MATERIALS

fiitings =
1.15 * 24.60 = 28.29 kg = 0.02829 tonne
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.10.4 32andmm
making good the
bore
MATERIALS

fiitings =
1.15 * 31.70 = 36.455 kg = 0.036455 tonne
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.10.5 40andmm
making good the
bore
MATERIALS

fiitings =
1.15 * 36.50 = 41.975 kg = 0.041975 tonne
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.10.6 50andmm
making good the
bore
MATERIALS

fiitings =
1.15 * 51.70 = 59.455 kg = 0.059455 tonne
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.12.1 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making
good
18.11.1 15 mmthediawalls etc. concealed
nominal bore pipe, including painting with anti corrosive
Materials :-

fiitings =
1.15 * 12.30 = 14.145 kg = 0.014145 tonne
Painting G.I. pipe with anti-corrosive bitumastic paint two or more coat
18.40.1 (Rate same as per item no. 18.40.1) 10.05 metre
Making chases upto 7.5x7.5cm in walls and making good the same
18.78 Rate as per item no. 18.78 Of SH Water Supp 171.8 metre
Labour :-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.12.2 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making
good
18.11.2 20 mmthediawalls etc. concealed
nominal bore pipe, including painting with anti corrosive
Materials :-

fiitings =
1.15 * 15.90= 18.285 kg = 0.018285 tonne
Painting G.I. pipe with anti-corrosive bitumastic paint two or more coat
18.40.2 (Rate same as per item no. 18.40.2 Of SH Wa 12 metre
Making chases upto 7.5x7.5cm in walls and making good the same
18.78 Rate as per item no. 18.78 Of SH Water Supp 171.8 metre
Labour :-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.13.1 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and
refilling
18.12.1 15 mm dia etc.nominal
External work
bore
Materials :-

fiitings =
1.02 * 12.30 = 12.546 kg = 0.012546 tonne
Labour :-
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
refilling
External work
bore
Materials :-

fiitings =
1.02 * 15.90 = 16.218 kg = 0.016218 tonne
Labour :-
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
refilling
External work
bore
Materials :-
fiitings =
1.02 * 24.60 = 25.092 kg = 0.025092 tonne
Labour :-
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
refilling
External work
bore
Materials :-

fiitings =
1.02 * 31.70 = 32.334 kg = 0.032334 tonne
Labour :-
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
refilling
External work
bore
Materials :-

fiitings =
1.02 * 36.50 = 37.23 kg = 0.03723 tonne
Labour :-
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
refilling
External work
bore
Materials :-

fiitings =
1.02 * 51.70 = 52.73 kg = 0.05273 tonne
Labour :-
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
refilling
External work
bore
Materials :-

fiitings =
1.02 * 66.30 = 67.626 kg = 0.067626 tonne
Labour :-
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
refilling
External work
bore
Materials :-

fiitings =
1.02 * 86.40 = 88.128 kg = 0.088128 tonne
Labour :-
114 Beldar 645 Day
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.14.1 18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by
providing
18.13.1 25 to 40 mmand fixing tee,
nominal boreincluding cutting and threading the pipe etc. complete :
Details of cost for one connection.
Take 25mm dia as an average size.
Materials :-
1608 G.I. tees (equal) 25 mm 65 each
1555 G.I. back (jam) nuts 25 mm dia 18 each
9988 Carriage of materials and sundries 2.12 L.S.
Labour :-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one connection
Say
18.14.2 18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by
providing
18.13.2 50 to 80 mmand fixing tee,
nominal boreincluding cutting and threading the pipe etc. complete :
Details of cost for one connection.
Take 65mm dia as an average size.
Materials :-
1612 G.I. tees (equal) 65 mm 452 each
Labour :-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one connection
Say
18.15 18.14 Fixing water meter and stop cock in G.I. pipe line including cutting and threading
Code the pipe and making long screws etc. complete
Description Rate (cost of water
Unitmeter and stop
Details of cost for one meter with stop cock
Materials :-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre with stop cock
Say
18.16.1 18.15 Providing and fixing brass bib cock of approved quality :
18.15.1 15 mm nominal bore
Materials :-
1339 Brass bib-cock 15 mm dia 210 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.16.2 18.15 Providing and fixing brass bib cock of approved quality :
Materials :-
1340 Brass bib-cock 20 mm dia 225 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.17.1 18.16 Providing and fixing brass stop cock of approved quality :
Materials :-
1342 Brass stop-cock 15 mm dia 210 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.17.2 18.16 Providing and fixing brass stop cock of approved quality :
Materials :-
1343 Brass stop-cock 20 mm dia 225 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.18.1 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed
18.17.1 25 end) : bore
mm nominal
Materials :-
1927 Brass full way valve with C.I. wheel (screwed 375 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
(screwed
18.17.1A 20 end) : bore
mm nominal
MATERIAL
1926 20 mm dia Gunmetal gate valve with wheel 325 each
9977 Carriage of metrial and fixing charge 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No.
Say
(screwed
18.17.2 32 end) : bore.
mm nominal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
(screwed
18.17.3 40 end) : bore
mm nominal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
(screwed
18.17.4 50 end) : bore
mm nominal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
(screwed
18.17.5 65 end) : bore
mm nominal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
(screwed
18.17.6 80 end) : bore
mm nominal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.19.1 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure,
with
18.18.1 15 mmplastic floats
nominal complete :
bore
Materials :-
1922 H.P. or L.P. ball valve with polythene floats: 215 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
with
nominal complete :
bore
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
with
nominal complete :
bore
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.20.1.1 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed
end)
18.19.1 25 mm: nominal bore
18.19.1.1Horizontal
Materials :-
1933 Gunmetal non-return valve-horizontal (screw 350 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.1.2Vertical
Materials :-
3080 Gunmetal non-return valve-vertical (screwed 400 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.2.1Horizontal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.2.2Vertical
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.3.1Horizontal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.3.2Vertical
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.4.1Horizontal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.4.2Vertical
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.5.1Horizontal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.5.2Vertical
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.6.1Horizontal
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
end)
18.19.6.2Vertical
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.21.1 18.2 Providing and fixing brass ferrule with C.I. mouth cover including boring and
18.20.1 15tapping the mainbore
mm nominal :
Materials :-
1360 C.I.mouth, brass ferrule 15 mm dia 140 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.20.2 20tapping the mainbore
mm nominal :
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
tapping
18.20.3 25 the mainbore
mm nominal :
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.22.1.1 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :
18.21.1 30 cm length
18.21.1.115 mm nominal bore
Materials :-
1687 Unplasticised P.V.C.connection pipe with bra 30 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
Materials :-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.23.1 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
18.22.1 100 mm diameter
Materials :-
1878 Shower rose C.P.brass for 15 to 20 mm inlet 110 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.23.2 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
Materials :-
1879 Shower rose C.P.brass for 15 to 20 mm inlet 125 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.24 18.23 Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding
Code cost of pipe).
Details of cost for 5.14 quintal
10 m of 200 mm dia C.I. pipe class 'A' Weight = (2x257) = 514kg = 5.1
Labour for laying pipe
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5.14 quintal
Cost per quintal
Say
18.25 18.24 Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers
Code and caps etc.(excluding cost of specials). Rate
Description Unit
10 Nos. Tee 200x150mm Weight = 70x10 = 700kg.
Labour for laying tee-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7 quintal
Cost per quintal
Say
18.26.1 18.25 Providing and laying S&S C.I. standard specials such as tees, bends, collars,
tapers,
18.25.1 Up caps
to 300 mmetc.
dia(Heavy class):
Materials :-
1464 S & S.C.I.standard specials upto 300 mm dia 3800 quintal
2309 Carriage of Cast iron fittings 145.72 tonne
LABOUR
18.24 Rate as per item No. 18.24 Of SH: Water Sup 546 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one quintal
Say
18.26.2 18.25 Providing and laying S&S C.I. standard specials such as tees, bends, collars,
tapers,
18.25.2 Over caps
300 mmetc.
dia (Heavy class):
Materials :-
1466 S & S.C.I.standard specials over 300 mm dia 3800 quintal
LABOUR :
For laying
18.24 Rate as per item No. 18.24 Of SH: Water Sup 546 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Say
18.27.1 18.26 Providing and laying flanged C.I. standard specials such as tees, bends, collars,
tapers,
18.26.1 Up caps
to 300 mmetc.,
dia suitable for flanged jointing as per IS : 1538 :
Materials :-
1468 Flanged C.I. standard specials upto 300 mm d 5700 quintal
LABOUR
For laying
18.24 Rate as per item No. 18.24 of SH: Water Suppl 546 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Say
18.27.2 18.26 Providing and laying flanged C.I. standard specials such as tees, bends, collars,
tapers,
18.26.2 Over caps
300 mmetc.,
dia suitable for flanged jointing as per IS : 1538 :
Materials :-
1470 Flanged C.I. standard specials over 300 mm d 5250 quintal
LABOUR
For laying
18.24 Rate as per item No. 18.24 of SH: Water Supp 546 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Say
18.28.1 18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA)
conforming
18.27.1 100 to IS - 1536 :
mm dia pipe
Materials :-
100mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 19.820 Kg
Weight of 10m pipes 19.820x10 = 198.20 Kg
7697 S&S Centrifugally (Spun) C.I. Pipe class LA 857 Metre
2319 Carriage of Spun iron S & S pipes 100 mm di 358.32 100 metre
Labour for laying
18.23 Rate same as per item no 18.23 of SH: Water 298.5 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.2 125 to IS - 1536 :
mm dia pipe
Materials :-
7698 S&S Centrifugally (Spun) C.I. Pipe class LA 1067 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.3 150 to IS - 1536 :
mm dia pipe
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.4 200 to IS - 1536 :
mm dia pipe
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.5 250 to IS - 1536 :
mm dia pipe
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.6 300 to IS - 1536 :
mm dia pipe
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.7 350 to IS - 1536 :
mm dia pipe
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.8 400 to IS - 1536 :
mm dia pipe
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.9 450 to IS - 1536 :
mm dia pipe
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.10 500 to IS - 1536 :
mm dia pipe
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.27.11 600 to IS - 1536 :
mm dia pipe
Materials :-
2329 Carriage of Spun iron S & S pipes 600mm dia 5972.04 100 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
18.29.1 18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials, including
testing
18.28.1 100 mmofdiameter
joints but excluding the cost of pig lead :
pipe
Materials :-
0.17x 10 =1.70 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.20x10=2.00 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.23x10=2.30 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.3x10=3.00 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.4x10=4 00 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.54x10 =5.40 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.62x10=6.20 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.74x10=7.40 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.79x10=7.90 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
0.85x10=8.50 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
pipe
Materials :-
1.02x10=10.20 kg
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
18.3 18.29 Supplying pig lead at site of work.

materials-
2341 Carriage of Pig lead 145.72 tonne
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one quintal
Say
18.31.1 18.3 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including
18.30.1 80testing of joints :pipe
mm diameter
Materials :-
1956 Bolts and nuts 16 mm dia 60 mm long 11.5 each
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
1957 Bolts and nuts 16 mm dia 65 mm long 13 each
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
testing
joints : pipe
Materials :-
Labour-
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
18.32.1.1 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,
rubber
18.31.1 100 mminsertions
diameter etc. (the tail pieces if required will be paid separately) :
18.31.1.1Class I
Details of cost for 10 sluice valves
Materials :-
1940 C.I.sluice valve (with caps) class I : 100 mm d 2450 each
Carriage of sluice valves
wt.= 44.3x10=443kg= 0.443t. say 0.44t
Labour for laying sluice valve
18.24 (Rate as per item No. 18.24 Of SH: Water Sup 546 quintal
Providing flanged joints to sluice valves with bolts, nuts and rubber inse
18.30.2 (Rate as per item No.18.30.2 Of SH: Water S 284.75 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.1.2Class II
Materials :-
3311 C.I.sluice valve (with caps) class II : 100 mm d 2700 each
wt. = 44.3x10=443kg = 0.443t. say 0.44t
18.24 (Rate as per item No. 18.24 Of SH: Water Su 546 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber insertions etc. (the tail pieces if required will be paid separately) :
18.31.2.1Class I
Materials :-
wt. = 56.3x10=563kg = 0.563t. say 0.56t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.2.2Class II
Materials :-
wt. = 68.3x10=683kg = 0.68t say 0.68t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.3.1Class I
Materials :-
wt. = 72.5x10=725kg = 0.725t. say 0.72t
18.30.4 (Rate as per item No.18.30.4 Of SH: Water Su 343.55 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.3.2Class II
Materials :-
wt. = 86.5x10=865kg = 0.865t. say 0.865t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.4.1Class I
Materials :-
wt. = 121.5x10=1215kg = 1.215t. say 1.22t
18.30.5 (Rate as per item No.18.30.5 Of SH: Water Su 377 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.4.2Class II
Materials :-
wt. = 150.5x10=1505 kg = 1.5 t. say 1.5 t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.5.1Class I
Materials :-
wt. = 179.9x10=1799kg = 1.799t. say 1.80t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.5.2Class II
Materials :-
wt. = 229.9x10=2299kg = 2299t. say 2.30t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.6.1Class I
Materials :-
wt. = 242.4x10=2424kg = 2.424t. say 2.42t
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
rubber
18.31.6.2Class II
Materials :-
wt. = 303.4x10=3034kg = 3.304t.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 valves
Cost of 1 valve
Say
18.33.1 18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement
mortar
18.32.1 With 1:4 (1 cement
common :4 coarse
burnt clay sand)modular)
F.P.S.(non for stop bricks
cock, with C. I. designation
of class surface box 7.5
Details of cost for one chamber
Materials :-
(i) Earth work in excavation including refilling and disposal of surplu
2.25 Rate as per item No.2.25 253.95 cum
(ii) Cement concrete 1:5:10 (1 Cement : 5 fine sand : 10 graded ston
0.68x0.68x0.075m=0.035cum. Say 0.04 cum.
4.1.11 Rate as per item no 4.1.11 of SH : Concrete 5660.45 cum
(iii) Second class brick work in cement mortar 1:4 (1 Cement : 4 coarse
1.66mx0.115x0.50m=0.095cum. Say 0.10 cum.
6.1.1 Rate as per item no 6.1.1 of SH : Brick Work 6788.1 cum
(iv) 12mm cement plaster 1:3 (1 Cement : 3 Coarse sand) finished with
1.20x0.50=0.60sqm
0.30x0.30=0.09sqm.
Total =0.69sqm. Say 0.70sqm.
1304 Surface box for stop cock 125 each
(vi)
9977 Carriage of C.I. surface box 2.12 L.S.
(vii) Cement concrete 1:2:4 (1 Cement : 2 Coarse sand ; 4 graded st
in slab = 0.53mx0.53mx0.075m = 0.02107cum.
Less surface box 0.112x0.112x0.076 =(-)0.00094 cum.
= 0.0201 cum. Say 0.02cum.
5.3 Rate as per item No.5.3 SH : R.C.C 10719.35 cum
(viii) Less labour for not lifting the materilas upto floor five level
115 Coolie 645 Day
(ix)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
mortar
18.33.1 With 1:4 (1 cement
common : 4 coarse
burnt clay sand)
F.P.S.(non for sluice
modular) valve,
bricks ofwith
classC.I. surface box
designation 7.5
Materials :-
Say 1.46 cum.
1.21x1.21x0.1m=0.146cum. Say 0.15 cum.
(iii) Second class brick work in cement mortar 1: 4(1 Cement : 4coarse
3.32mx0.23mx0.75m=0.573cum. Say 0.57 cum.
2.40x0.75=1.80sqm.
0.60x0.60=0.36sqm.
Total = 2.16sqm.
(v) C.I. surface box with hinged cover 100x100x75mm (inside)
1305 Surface box for sluice valve 210 each
(vi)
9977 Carriage of C.I. surface box 2.12 L.S.
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 3.142/4xd2x0.18m -- 0.7854x0.156mx0.156mx0.18 =
= 0.1651 cum. Say 0.17 cum.
5.3 Rate as per item No.5.3 Of SH: RCC 10719.35 cum
115 Coolie 645 Day
(ix) Mild steel reinforcement for RCC work

etc.
0.165cum.x80kg/cum. = 13.2kg
(x) Form work 0.60mx0.60m=0.36sqm.+
3.32mx0.15m=0.50sqm.
= 0.86 sqm.
5.9.3 Rate as per item No.5.9.3 Of SH: RCC 761.8 sqm
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
mortar
18.34.1 With 1:4 (1 cement
common : 4 coarse
burnt clay sand)
modular) valve,
bricks ofwith
designation 7.5100
Materials :-
= 2.85cum.
1.51x1.51x0.1m=0.228cum. Say 0.23 cum.
(iii) Second class brick work in cement mortar 1:4 (1 Cement : 4coarse
4.52mx0.23mx1.00m=1.04cum.
3.60mx1.00m=3.60sqm.
0.90mx0.90m=0.81sqm.
Total=4.41sqm.
(v) C.I. surface box with chained lid.
9977 (vi) Carriage of C.I. surface box 2.12 L.S.
in slab = 1.36mx1.36mx0.15m = 0.2774 cum.
Less surface box 0.7854x0.156mx0.156mx0.18m = (-)0.0034 cum.
= 0.2740 cum. Say 0.27 cum.
115 Coolie 645 Day
(ix) Mild steel reinforcement for RCC work etc.
0.274cum.x80kg/cum. = 21.92 kg.
(x) Form work
0.90mx0.90m=0.81sqm.+
4.52mx0.15m = 0.68 sqm.
Total= 1.49 sqm.
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
mortar
18.35.1 With 1:4 (1 cement
common : 4 coarse
burnt clay sand)
modular) valve,
bricks ofwith
designation 7.5100
Materials :-
1.81x1.81x0.1m=0.328cum. Say 0.33 cum.
(iii) Second class brick work in cement mortar 1:4 (1 Cement : 4coarse
5.72mx0.23mx1.00m=1.316cum. Say 1.32 cum.
4.80mx1.00m=4.80sqm.
1.20mx1.20m=1.44sqm.
Total=6.42sqm.
(v) C.I. surface box with chained lid
in slab = 1.66mx1.66mx0.15m = 0.4133 cum.
Less surface box 0.7854x0.156mx0.156mx0.18m = (-)0.0034 cum.
Total= 0.4099 cum. Say 0.41 cum.
(viii) Less labour for not lifting the materilas

upto floor five level
115 Coolie 645 Day
(ix) Mild steel reinforcement for RCC slab steel @ 80kg/cum.
0.41cum.x80kg/cum. = 32.80kg.
(x) Form work
1.20mx1.20m=1.44sqm.+
5.72mx0.15m=0.86 sqm.
Total = 2.30sqm.
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
18.37.1 18.36 Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement
mortar
18.36.1 With 1:4 (1 cement
common : 4 coarse
burnt clay sand)
F.P.S.(non for fire hydrants,
modular) with C.I.
bricks of class surface box
designation 7.5
Materials :-
= 1.464cum. Say 1.46cum.
1.21x1.21x0.1m=0.146cum. Say 0.15 cum.
3.32mx0.23mx0.75m=0.573cum. Say 0.57 cum.
2.40mx0.75m=1.80sqm.
0.90mx0.90m=0.36sqm.
Total=2.16sqm.
(v) C.I. surface box with chained lid
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 0.61x0.41mx0.15m= (-)0.0375 cum.
= 0.131 cum. Say 0.13 cum.
115 Coolie 645 Day
(ix) Mild steel reinforcement for RCC work etc.
0.131cumx80kg/cum. = 10.48kg.
(x) Form work
0.60mx0.60m=0.36sqm.+
3.32mx0.15m = 0.50 sqm.
Total =0.86 sqm.
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
mortar
18.37.1 With 1:4 (1 cement
common : 4 coarse
burnt clay sand)
F.P.S.(non for water
modular) meterofcomplete
bricks with C.I. double
class designation 7.5
Materials :-
= 1.09cum.
1.21x1.06x0.1m=0.128cum. Say 0.13 cum.
3.02mx0.23mx0.50m=0.347cum. Say 0.35 cum.
2.10mx0.50m=1.05sqm.
0.60mx0.45m=0.27sqm.
Total=1.32sq
(v) C.I. surface box 400x200x200mm (inside) with locking arrangement
1307 Surface box for water meter 250 each
in slab = 1.06mx0.91mx0.25m = 0.241 cum.
Less surface box 0.42x0.22mx0.2m= (-)0.018 cum.
= 0.223 cum. Say 0.22 cum.
(viii) Less labour for not lifting the materilas
upto floor five level
115 Coolie 645 Day
(ix) Mild steel reinforcement for RCC work steel @ 80kg/cum.
0.223cum.x80kg/cum. = 17.84 kg.
(x) Form work
0.60mx0.45m=0.27sqm.+
3.02mx0.25m=0.76sqm.
Total = 1.03sqm.
(xi)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
18.39.1 18.38 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats
over
18.38.1 15 mma ready mixed
diameter priming coat, both of approved quality for new work :
pipe
Perimeter = 0.0673 metre
Area=10x0.0673m = 0.673sqm.
Priming coat-
Painting two coats excluding priming coat with white paint on new work
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
over
pipe
Area = 10x0.0845 sqm. = 0.845 sqm.
Priming coat-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
over
pipe
Area = 10x0.1061 sqm. = 1.061 sqm.
Priming coat-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
over
pipe
Area = 10x0.1334 sqm. = 1.334 sqm.
Priming coat-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
over
pipe
Area = 10x0.1520 sqm. = 1.520 sqm.
Priming coat-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
over
pipe
Area = 10x0.1894 sqm. = 1.894 sqm.
Priming coat-
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.40.1 18.39 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat
of approved
18.39.1 15 mm diameterquality
pipe:
Painting one coat with white paint on old work.
TOTAL
Add 1 % for water charges on all except (A) i.e. on (75.34 - 58.25) = 1
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
of approved
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
of approved
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
of approved
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
of approved
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
of approved
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.41.1 18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint
18.40.1 15of approved
mm diameterquality
pipe:
Painting with anti-corrosive paint two coats.
13.65.1 (Rate as per item No.13.65.1 sub-heads finish 115.1 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
mm diameterquality
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
mm diameterquality
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
mm diameterquality
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
mm diameterquality
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
mm diameterquality
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
mm diameterquality
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
mm diameterquality
pipe:
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.42.1 18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.I.
pipes
18.41.1 15 mmindiameter
externalpipe
work :
Details of cost of sand filling alround 15mm dia. pipe 10 metre long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 21.8mm
= 246.8mm say 247mm
Quantity of sand = 10x0.30x0.247 = 0.744 cum.
Less for pipe = 3.142/4(21.8)²x10 = (-)0.004 cum.
= 0.74 cum.
18.41.1A Rate as per Item Number 18.41.1A of SH:Wat 2131.25 cum
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
externalpipe
work :
= 252.3 Say 252mm
Quantity of sand = 10x0.30x0.252 = 0.756 cum.+
Less for pipe =3.142/4(27.3)²x10 = (-)0.006cum.
= 0.750 cum
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
externalpipe
work :
= 259.2 Say 259mm
Less for pipe 3.142/4(34.2)²x10 = (-)0.009cum.
= 0.768 Say 0.77 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
externalpipe
work :
= 267.9 Say 268mm
= 0.790 Say 0.79 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
externalpipe
work :
= 273.8 Say 274mm
= 0.801 Say 0.80 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
externalpipe
work :
= 285.8 Say 286mm
= 0.829 Say 0.83 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
externalpipe
work :
= 301.6 Say 302mm
= 1.313 Say 1.31 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
externalpipe
work :
= 314.9 Say 315mm
= 1.354 Say 1.35 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
18.41.9 100 mm in diameter
external work
pipe :
Max. external dia of pipe = 115mm
= 340mm
= 1.43 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
pipes
18.41.10 150 mm in diameter
external work
pipe :
= 391.50mm Say 0.392m
= 2.13 cum.
TOTAL
Cost of 10 metre
Cost of one metre
Say
18.43.1 18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils
except
18.42.1 Up to 6 ordinary hard rocks requiring blasting, including removing the casing
metres depth
Labour
For boring and removing the pipe-
114 Beldar 645 Day
10 Hire charges of Derrick monkey rope 750 Day
and other accessories
Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. per metre
1472 Casing pipe 100 mm dia 340 metre
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6 metre
Cost per metre
Say
except ordinary
18.42.2 Beyond 6 m andhard
up torocks
12 m requiring
depth blasting, including removing the casing
Labour
114 Beldar 645 Day
10 Hire charges of Derrick monkey rope 750 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6 metre
Cost per metre
Say
except ordinary
18.42.3 Beyond hard
12 m and rocks
up to 18 mrequiring
depth blasting, including removing the casing
Labour
114 Beldar 645 Day
10 Hire charges of Derrickmonkey rope 750 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 6 metre
Cost per metre
Say
18.44 18.43 Providing and placing in position filters of 40 mm diameter G.I. pipe with brass
Code strainer of approved quality.
Details of cost for one strainer 1.5 long
Materials
1882 Strainer brass 40 mm dia 1.5 metre long 625 each
Labour:
114 Beldar 645 Day
9999 Sundreis including hamp white lead etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.5 metre
Cost per metre
Say
18.45 18.44 Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for
Code tube well including cleaning and priming the
Description tube well.
Rate Unit
Details of cost for a depth of 10 metre
Materials:
Carriage of 40mm pipe(36.5kg)
Added 2% wastage and fitting
9999 White lead, hamp and oil etc. 2.12 L.S.
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
18.46 18.45 Providing and placing in position hand pump of approved quality for 40 mm
Code diameter G.I. pipe complete with all accessories.
Details of cost for one pump
Materials:
1693 S.C.I. hand pump 700 each
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one hand pump
Say
18.47.1 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the
pipe
18.46.1 15 mm and makingbore
nominal long screws etc. complete (New work) :
Materials:
1641 G.I. Union 15 mm nominal bore 35 each
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
18.46.2 20 mmand makingbore
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
1648 G.I. Union 80mm nominal bore 575 each
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
18.48.1 18.47 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the
pipe
nominal long screws, including excavation, refilling the earth or cutting
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe and making long screws, including excavation, refilling the earth or cutting
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
Materials:
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
pipe
18.47.8 80 mm and makingbore
Materials:
1648 G.I. Union 80mm nominal bore 575 each
Labour:
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each no.
Say
18.49 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage
Code tank, IS : 12701 marked, with cover and suitable
Description Rate locking arrangement
Unit and making
Details of cost for 500 litres
Materials:
1649 Polyethylene water storage tank with cover an 6.1 per litr
9999 Placing at terrace 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 500 litre
Cost per litre
Say
18.5 18.48A Providing and fixing rectangular high density polyethylene water storage loft
Code tank with cover, conforming to ISI : 12701, Rate
Description colour of opaqueUnit
white or as approved
Details of cost for one no. tank of 500 litres
Materials:
1649 Polyethylene water storage tank with cover an 6.1 per litr
9999 Placing at terrace 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 500 litre
Cost per litre
Say
18.51.1 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to
IS:8931
18.49.1 15 :
mm nominal bore
Materials:
7257 C.P. Brass bibcock 15 mm 300 each
9988 Carrige of material and fixing charges 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.52.1 18.5 Providing and fixing C.P. brass long nose bib cock of approved quality
18.50.1 15conforming
mm nominal to ISbore
standards and weighing not less than 810 gms.
Materials:
7258 C.P. Brass long nose bibcock 15 mm 500 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.53.1 18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming
18.51.1 15 to ISbore
mm nominal standards and weighing not less than 690 gms.
Materials:
7259 C.P. Brass long body bibcock 15 mm 500 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.54.1 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved
18.52.1 15 make bore
mm nominal conforming to IS:8931.
Materials:
7260 C.P. Brass stop cock (concealed) 15 mm 420 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.55.1 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved
18.53.1 15mm quality
nominal conforming to IS:8931
bore
Materials:
7261 C.P. Brass angle valve 15 mm 350 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.56 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved
Code make and quality as per direction of Engineer-in-charge.
MATERIAL
593 C.P. Brass Extension Nipple (1/2"x2" size) 40 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 No
Say
18.57.1 18.54 Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms
Materials:
7400 15 mm PTMT bib cock 65 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.54.2 15 mm nominal bore, 122mm long, weighing not less than 99 gms
Materials:
7401 15 mm PTMT bib cockwith flange (fancy) 90 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.54.3 15 mm nominal bore, 165 mm long, weighing not less than 110 gms
Materials:
7402 15 mm PTMT bib cock long body with flange 100 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
Materials:
7859 P.T.M.T. Bib cock with nozzle 15mm 110 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.58.1 18.55 Providing and fixing PTMT stop cock of approved quality and colour.
Materials:
7403 15 mm dia PTMT stop cock (male thread) 60 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
Materials:
7405 20 mm dia. PTMT stop cock 68 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.55.3 Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than
Code 108 gms
Materials:
7861 P.T.M.T. Stop cock (concealed) 15mm 120 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.59.1 18.56 Providing and fixing PTMT pillar cock of approved quality and colour.
Materials:
7406 PTMT pillar cock 115 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.59.2 18.56 Providing and fixing PTMT pillar cock of approved quality and colour.
18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
Materials:
7410 PTMT pillar cock (fancy) 15 mm foam flow. 125 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.60.1 18.57 Providing and fixing PTMT, push cock of approved quality and colour.
Materials:
7407 PTMT push cock 15 mm dia. 55 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.60.2 18.57 Providing and fixing PTMT, push cock of approved quality and colour.
Materials:
7408 PTMT push cock 12 mm dia. 20 mm BSP 45 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.61.1.1 18.58 Providing and fixing PTMT grating of approved quality and colour.
18.58.1 Circular type
18.58.1.1100 mm nominal dia
Materials:
7409 PTMT grating 100 mm dia. 16 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.58.1 Circular type
18.58.1.2125 mm nominal dia with 25 mm waste hole
Materials:
7411 125 mm grating withwaste hole 25 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.58.2 Rectangular type with openable circular lid
18.58.2.1150 mm nominal size square 100 mm diameter of the inner hinged round grating
Materials:
7412 Rectangular type with openable circular lid 118 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 No.
Say
18.62.1 18.59 Providing and fixing C.I. double acting air valve of approved quality with bolts,
nuts,
18.59.1 50 mm rubber
dia insertions etc. complete (The tail pieces, tapers etc if required will
Details of cost for 10 no. double acting air valves
Materials:
7415 Double acting air valve 50 mm 3715 each
9977 Carriage of air valves 2.12 L.S.
9999 Labour for laying double acting air valve 2.12 L.S.
Providing flanged joints to double acting air valves with bolts, nuts and
18.30.1 (Rate as per item no 18.30.1 of SH : Water Su 182.85 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 air valves
Say
nuts,
18.59.2 80 mm rubber
Materials:
TOTAL
TOTAL
TOTAL
TOTAL
Say
nuts,mm
18.59.3 100 rubber
Materials:
18.30.2 (Rate as per item No.18.30.2 Of SH:Water Su 284.75 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
18.63.1 18.6 Providing and fixing enclosed type water meter (bulk type) conforming to IS :
18.60.1 802373
mm and
diatested
nominalby Municipal
bore Board complete with bolts, nuts, rubber insertions
Details of cost for one no. water meter
Materials:
7418 Water meter (including testing charges) 80 m 2030 each
9999 Testing charges 2.12 L.S.
9977 Carriage of water meter 2.12 L.S.
9999 Labour for laying water meter 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 water meter
Say
2373mm
18.60.2 100 anddia
tested by Municipal
nominal bore Board complete with bolts, nuts, rubber insertions
Materials:
7419 Water meter (including testing charges) 100 3143 each
18.30.2 (Rate as per item No.18.30.2) 284.75 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
2373mm
18.60.3 150 anddia
tested by Municipal
Materials:
TOTAL
TOTAL
TOTAL
TOTAL
Say
2373mm
18.60.4 200 anddia
tested by Municipal
Materials:
18.30.5 (Rate as per item no 20.47.5 of SH : Water Su 377 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
18.64.1 18.61 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts,
bolts,
18.61.1 80 mmrubber
dia insertions etc. complete conforming to IS : 2373 :
Details of cost for on no. dirt box strainer
Materials:
7422 Dirt box srainer 80 mm 2680 each
9977 Carriage of dirt box strainer 2.12 L.S.
9999 Labour for laying dirt box strainer 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 dirt box stainer
Say
bolts,
18.61.2 100 mmrubber
Details of cost for 1 no. dirt box stainer
Materials:
TOTAL
TOTAL
TOTAL
TOTAL
Say
bolts,
Details of cost for 1 no. dirt box stainer
Materials:
TOTAL
TOTAL
TOTAL
TOTAL
Say
bolts,
Details of cost for one no. dirt box stainer
Materials:
18.30.5 (Rate as per item no 20.47.5 of SH : Water Su 377 each
TOTAL
TOTAL
TOTAL
TOTAL
Say
18.65.1 18.62 Providing and fixing PTMT Ball cock of approved quality, colour and make
complete
18.62.1 15 with Epoxy
mm nominal bore, coated
105 mmaluminium rod with
long, weighing not L.P./
less H.P.H.D.
than 138 plastic
gms ball.
Materials :
7495 PTMT Ball Cock 15mm Complete with Epoxy C 75 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
complete
120 mmaluminium rod with
long, weighing not L.P./
less H.P.H.D.
than 198 plastic
gms ball.
Materials :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
complete
152mmaluminium rod with
long, weighing L.P./ than
not less H.P.H.D. plastic ball.
440 gms
Materials :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
complete
not less H.P.H.D. plastic ball.
690 gms
Materials :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
complete
not less H.P.H.D.
1240plastic
gms ball.
Materials :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
18.66 18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not
Code less than 85 gms
Materials :
7500 PTMT Angle Stop cock with Flenge 15mm 85 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
18.67 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not
Code less than 40 gms
Materials :
7501 PTMT Swiveling shower 15mm 65 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
18.68 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
Code 102mm, height of 75mm with concealed fitting
Description Ratearrangements, weighing not less
Unit
Materials :
7509 PTMT Soap Dish/Holder 138x102x75mm 58 Each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
18.69.1 18.66 Providing and laying S&S C.I. Standard specials such as tees, bends, collars
tapers
18.66.1 Up andmm
to 300 capsdiaetc, suitable for flanged jointing as per IS : 1538 :
Materials :-
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as 5190 Quintal
Labour for laying
18.24 Rate as per Item Number 18.24 of SH: Water 546 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.69.2 18.66 Providing and laying S&S C.I. Standard specials such as tees, bends, collars
tapers and
18.66.2 Above capsdia
300 mm etc, suitable for flanged jointing as per IS : 1538 :
Materials :-
7709 S&S Centrifugally (Spun) C.I. Pipe Specials as 6200 Quintal
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.70.1 18.67 Providing and laying S&S C.I. Standard specials suitable for mechanical jointing
as per
18.67.1 Up IS :mm
to 300 13382
dia:
Materials :-
7710 S&S Centrifugally (Spun) C.I. Pipe specials su 8571 Quintal
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.70.2 18.67 Providing and laying S&S C.I. Standard specials suitable for mechanical jointing
as per IS
18.67.2 Above 300: 13382
mm dia:
Materials :-
7711 S&S Centrifugally (Spun) C.I. Pipe Specials s 9048 Quintal
Labour for Laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.71.1 18.68 Providing and laying D.I. specials of class K-12 suitable for push-on jointing as
per to
18.68.1 Up IS 600
: 9523
mm: dia
Materials :-
7682 Ductile Iron K - 12 specials suitable for push 12400 Quintal
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.71.2 18.68 Providing and laying D.I. specials of class K-12 suitable for push-on jointing as
per IS :600
18.68.2 Above 9523mm: dia
Materials :-
7683 Ductile Iron K - 12 specials suitable for push 17200 Quintal
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.72.1 18.69 Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing
as per
18.69.1 Up IS :mm
to 600 9523dia
:
Materials :-
7684 Ductile Iron specials suitable for mechanical j 13050 Quintal
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.72.2 18.69 Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing
as per IS
18.69.2 Above 600: 9523
mm dia:
Materials :-
7685 Ductile Iron Specials suitable for mechancial 18750 Quintal
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 quintal
Say
18.73.1 18.7 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron
Pipes
18.70.1 100 mm including
dia pipes testing of joints and the cost of rubber gasket :
Details of cost for 50 Joints
Materials :-
7666 Ruber Gaskets Conforming to I.S 5382 of S.B 29 Each
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
Pipesmm
18.70.15 1000 including testing of joints and the cost of rubber gasket :
dia pipes
Materials :-
Labour
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 50 joints
Cost for 1 joint
Say
18.74.1 18.71 Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun)
Castmm
18.71.1 100 Iron,
diaClass B (IS : 1536)
C.I. Double : Pipe
Flanged
Materials :-
100 mm dia. cast iron pipes double flanged
Weight of 5 m pipes 27.00x5 = 135.00 Kg
7712 Screwed double flanged centrigually cast (spu 1310 Metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.2 150 Iron,
C.I. Double : Pipe
Flanged
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.3 200 Iron,
C.I. Double : Pipe
Flanged
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.4 250 Iron,
C.I. Double : Pipe
Flanged
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.5 300 Iron,
C.I. Double : Pipe
Flanged
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.6 350 Iron,
C.I. Double : Pipe
Flanged
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.7 400 Iron,
C.I. Double : Pipe
Flanged
Materials :-
7718 Screwed double flanged centrigually cast (spu 8143 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.8 450 Iron,
C.I. Double : Pipe
Flanged
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.9 500 Iron,
C.I. Double : Pipe
Flanged
Materials :-
7720 Screwed double flanged centrigually cast (spu 12914 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Castmm
18.71.10 600 Iron,
C.I. Double : Pipe
Flanged
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
18.75.1 18.72 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes
conforming
18.72.1 100 to IS : 8329
mm dia Ductile Iron :Class K-7 pipes
Materials :-
100mm dia. cast iron pipes (in 5.5 m lengths)
7722 Ductile Iron Class K- 7 pipe conforming to I. 800 Metre
2343 Carriage of ductile iron pipes (k7) 100 mm dia 358.32 100 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.2 150 to IS : 8329
Materials :-
150 mm dia. cast iron pipes (in 5.5 m lengths)
2344 Carriage of cast iron pipes 150 mm dia 597.2 100 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.3 200 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.4 250 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming to IS : 8329 :
18.72.5 300 mm dia Ductile Iron Class K-7 pipes
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.6 350 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.7 400 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.8 450 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.9 500 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.10 600 to IS : 8329
Materials :-
7731 Ductile Iron Class K- 7 pipe conforming to I. 5600 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Add 1 % for Labour Cess on all except (A) i.e. on (79111 - 4137.21)
Cost for 10 metre
Cost per metre
Say
conforming
18.72.11 700 to IS : 8329
Materials :-
Labour for laying
18.23 Rate as per Item Number 18.23 of SH: Water 298.5 quintal
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.12 800 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.13 900 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.14 1000 mm diatoDuctile
IS : 8329
Iron: Class K-7 pipes
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.15 100 to IS : 8329
Materials :-
7651 Ductile Iron class K - 9 pipe Conforming to I 765 Metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.16 150 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.17 200 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.18 250 to IS : 8329
Materials :-
7654 Ductile Iron class K - 9 pipe Conforming to I. 2200 Metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.19 300 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming to IS : 8329 :
18.72.20 350 mm dia Ductile Iron Class K-9 pipes
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.21 400 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.22 450 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.23 500 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.24 600 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.25 700 to IS : 8329
Materials :-
2330 Carriage of C.I. pipes 500 mm dia 3981.36 100 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.26 750 to IS : 8329
Materials :-
2331 Carriage of R.C.C. pipes 900 mm dia 8958.06 100 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.27 800 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.28 900 to IS : 8329
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
conforming
18.72.29 1000 mm diatoDuctile
IS : 8329
Iron: Class K-9 pipes
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost per metre
Say
18.76.1 18.73 Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun)
Ductile
18.73.1 100 mmIron Pipes ofIron
dia Ductile Class K - 9 Flanged
Double conforming to IS : 8329 :
Materials :-
100 mm dia. ductile iron pipes double flanged
7686 Ductile Iron Pipe Class K-9 flanges and weld 1100 Metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
7687 Ductile Iron Pipe Class K-9 flanges and weldi 1650 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
7690 Ductile Iron Pipe Class K-9 flanges and weld 3790 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
18.73.6 350 mm dia Ductile Iron Double Flanged
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
Ductile
Materials :-
2330 Carriage of C.I. pipes 500 mm dia 3981.36 100 metre
Labour for laying
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 5 metre
Cost per metre
Say
18.77.1 18.74 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar
andmm
18.74.1 15 bush of approved
nominal quality
bore with 30cm and colour.
length
Materials :
7862 15 mm nominal bore and 30 cm length PVC con 38 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
18.77.2 18.74 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar
andmm
18.74.2 15 bush of approved
nominal quality
bore with 45 cmand colour.
length
Materials :
7863 15 mm nominal bore and 45 cm length PVC con 52 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
18.78.1 18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of
approved quality and colour.
18.75.1 15 mm nominal bore, weighing not less than 32 gms
Materials :
7864 P.T.M.T. extension nipple 15mm 25 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
approved
18.75.2 20 qualitybore,
mm nominal and weighing
colour. not less than 40 gms
Materials :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
approved
18.75.3 25mm quality
nominal andweighing
bore, colour. not less than 62 gms
Materials :
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
18.79.1 18.76 Cutting holes up to 30x30 cm in walls including making good the same:
18.76.1 With common burnt clay F.P.S. (non modular) bricks
Details of cost for 10 holes
Size 30x30 cm in 34 cm wall
Labour for cutting holes
114 Beldar 645 Day
Brick work with bricks of class designation 75 in cement mortar 1:4 (1
10x0.30x0.30x0.344m = 0.309 cum
Les 33% for pipe etc. = (-) 0.102 cum
= 0.207 cum Say 0.21 cum
12 mm cement plaster 1:4 (1 cement : 4 coarse sand)
10x2x0.3x0.3m = 1.80 sqm
Les 33% for pipe etc. = (-) 0.59 sqm
= 1.21 sqm Say 1.20 sqm
13.4.1 (Rate as per item no 13.4.1 of SH : Finishing) 307.25 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 holes
Cost for 1 hole
Say
18.8 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe
Code etc. and repairing the hole after insertion ofRate
Description drain pipe etc. with
Unit cement concrete
Average size 15x15x15 cm
Labour for cutting holes
114 Beldar 645 Day
Cement concrete 1:2:4 (1 cement : 2 coarse sand ; 4 graded stone ag
10x0.15x0.15x0.15 m = 0.033 cum
= 0.022 cum Say 0.0.02 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete W 7365.15 cum
9999 Finishing top and bottom and making the holes 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 holes
Cost for 1 hole
Say
18.81 18.78 Making chases up to 7.5x7.5 cm in walls including making good and finishing
Code with matching surface after housing G.I. pipe
Description etc.
Rate Unit
Labour for making chases
114 Beldar 645 Day
0.075x0.075x10 m = 0.05625 cum
= 0.03769 cum Say 0.04 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.82 18.79 Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in
Code masonry and filling with cement concrete 1:3:6
Description Rate (1 cement : 3 coarse sand: 6
Unit
0.2x0.2x10 m = 0.40 cum
Les for pipe 3.14x(0.15)²/4x10 = (-) 0.177 cum
= 0.223 cum Say 0.22 cum
9999 Disposal of malba 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.83.1 18.8 Disinfecting C.I. water mains by flushing with water containing bleaching powder
18.80.1 80@ 0.5
mmgms per litre
diameter C.I.ofpipe
water and cleaning the same with fresh water, operation to
MATERIAL
Bleaching powder
3x3.14/4x(80/10)²x(100x100)/1000x0.5 gms
= 754.28 gms Say 0.008 q
LABOUR
114 Beldar 645 Day
9999 Sundries including testing of samples 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
18.80.2 100 mm gms per litreC.I.
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(100/10)²x(100x100)/1000x0.5 gms
= 1178.57 gms Say 0.012 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(125/10)²x(100x100)/1000x0.5 gms
= 1841.52 gms Say 0.018 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(150/10)²x(100x100)/1000x0.5 gms
= 2651 gms Say 0.027 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(200/10)²x(100x100)/1000x0.5 gms
= 4712.39 gms Say 0.047 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(250/10)²x(100x100)/1000x0.5 gms
= 7363.10 gms Say 0.074 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(300/10)²x(100x100)/1000x0.5 gms
= 10602.88 gms Say 0.106 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(350/10)²x(100x100)/1000x0.5 gms
= 14431.70 gms Say 0.144 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(400/10)²x(100x100)/1000x0.5 gms
= 18849.60 gms Say 0.189 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(450/10)²x(100x100)/1000x0.5 gms
= 23856.50 gms Say 0.239 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(500/10)²x(100x100)/1000x0.5 gms
= 29452.40 gms Say 0.295 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
@ 0.5
diameter of pipe
MATERIAL
Bleaching powder
3x3.14/4x(600/10)²x(100x100)/1000x0.5 gms
= 42411.5 gms Say 0.424 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
18.84.1 18.81 Extra for every operation of disinfecting the C.I. main by flushing with water
containing
18.81.1 80 bleaching
mm diameter powder @ 0.5 gms per litre of water and cleaning the same
C.I. pipe
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
mm diameter C.I. powder
pipe @ 0.5 gms per litre of water and cleaning the same
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
containing
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metre
Say
18.85.1 18.82 Dismantling old C.I. pipes including excavation and refilling trenches after taking
18.82.1 80outmm
the diameter
pipes, breaking lead caulked joints, melting of lead and making into
C.I. pipe
Details of cost for 40.26 m or 11 nos. joints.
1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x3.14/4x(0.098)² =(-) 0.30 cum
Total= 16.31 cum
2.25 (Rate as per item No.2.25 of SH Earth work) 253.95 cum
Breaking lead caulked joints, blocks and stacking
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 40.26 metre
Cost for one metre
Say
out the
18.82.2 100 mmpipes,
diameterbreaking lead caulked joints, melting of lead and making into
C.I. pipe
1x40.26x55x0.75 m=16.61 cum
Total= 16.17 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.3 125 mmpipes,
C.I. pipe
1x40.26x55x0.75 m=16.61 cum
Total= 15.96 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.4 150 mmpipes,
C.I. pipe
1x40.26x55x0.75 m=16.61 cum
Total= 15.70 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.5 200 mmpipes,
C.I. pipe
1x40.26x60x0.75 m=18.12 cum
Total= 16.56 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.6 250 mmpipes,
C.I. pipe
1x40.26x.65x0.75 m=19.63 cum
Total= 17.26 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.7 300 mmpipes,
C.I. pipe
1x40.26x.70x0.75 m=21.14 cum
Total= 17.79 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.8 350 mmpipes,
C.I. pipe
1x40.26x.75x0.75 m=22.65 cum
Total= 18.14 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.9 400 mmpipes,
C.I. pipe
1x40.26x.80x0.75 m=24.16 cum
Total= 18.23 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.10 450 mmpipes,
C.I. pipe
1x40.26x.85x0.75 m=25.67 cum
Total= 18.38 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.11 500 mmpipes,
C.I. pipe
1x40.26x.90x0.75 m=27.18 cum
Total= 18.24 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
out the
18.82.12 600 mmpipes,
C.I. pipe
1x40.26x1.00x0.75 m=30.20 cum
Total= 17.44 cum
MATERIALS
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say
18.86.1 18.83 Labour for cutting C.I. pipe with steel saw.
18.83.1 80 mm diameter C.I. pipe
Detail of cost for one cut.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each cut
Say
18.87.1 18.84 Providing & fixing chrome plated brass battery based infrared sensor operated
pillar
18.84.1 15 mm cock, having
nominal borefoam flow technology.
Materials :-
3327 15 mm Battery Based Sensor Pillar Cock 6000 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
18.88.1 18.85 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS
standard
18.85.1 15.88 mm3448outercomplete
dia pipe with press type fitting (fitting shall be paid for
MATERIALS
8779 SS pipe 304 grades with press fit technology 140 metre
2272 Carriage of Stainless Steel pipes below 100 145.72 tonne
Add 3% for pipe inserted into fitting and

wastage etc. on X
3 * X / 100
Add 2% for special T&P and sundries etc. on X
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
standard
dia Pipe with press type fitting (fitting shall be paid for
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
standard
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
standard
MATERIALS
8782 SS pipe 304 grades with press fit technology 439.5 metre

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
standard
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
standard
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.89.1 18.85A Providing and fixing Stainless Steel pipes and fittings of grade 316L as per IS
6911:2017
18.85A.1 15 mm outer anddiaconforming
pipe to EN- 10312 standards complete with press type
MATERIALS
9544 SS pipe 316L grades as per IS 6911:2017 wit 310 metre

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
6911:2017
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
6911:2017
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
6911:2017
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
6911:2017
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
6911:2017
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
standard
18.86.1 15.88 mm3448outercomplete with press type fitting (fitting shall be paid for
dia .Pipes.
MATERIALS

wastage etc. on X
3 * X / 100
Making chases upto 7.5x7.5 cm.in walls and making good the same
18.78 Rate as per Item No.18.78 of SH:WATER 171.8 metre
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
standard
18.86.2 22.22 mm3448Outercomplete
dia pipeswith press type fitting (fitting shall be paid for
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
6911:2017
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
6911:2017
MATERIALS

wastage etc. on X
3 * X / 100
2 * X / 100
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
18.92.1 18.87 Providing and fixing required Stainless Steel Fitting of press fit design of grade
AISI15.88
18.87.1 For 304 conforming
mm outer dia to JWWA
pipe G116 standard with V-profile or M-profile and with
MATERIALS
8702 Coupling/Socket fittings for 15.88 mm outer d 60 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
MATERIALS
8787 Coupling/Socket fittings for 28.58 mm outer d 96.25 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
18.93.1 18.87A Providing and fixing required Stainless Steel Fitting of press fit design of grade
316L
18.87A.1 15 mm asouter
per ISdia6911:2017
pipe and conforming to EN-10312 standards with V-profile
MATERIALS
9550 Coupling/ Socket fitting for 15mm outer dia 215 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
mm x 15.88to JWWA
mm outerG116 standard with V-profile or M-profile and with
dia pipe
MATERIALS
8791 Reducer for 22.22 mm X 15.88 mm outer Dia 108.5 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
mm x 15.88to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
mm x 22.22to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm x 15.88to JWWA
dia pipe
MATERIALS
8794 Reducer for 34.00 mm X 15.88 mm outer Dia 200 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm x 22.22to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm x 28.58to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 15.88to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 22.22tommJWWA
outerG116 standard with V-profile or M-profile and with
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 28.58to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 34.00to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 15.88to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 22.22to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 28.58to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 34.00to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 42.70to JWWA
dia pipe
MATERIALS
8805 Reducer for48.60 mm X 42.70 mm outer Dia 425 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22mm
18.88A.1 For as perx IS
156911:2017
mm outer and conforming to EN-10312 standards with V-profile
dia pipe
MATERIALS
9556 Reducer for 22mm x 15mm outer dia SS pipe 255 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
18.88A.2 For perxIS156911:2017
mm outerand conforming to EN-10312 standards with V-profile
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
18.88A.3 For perxIS226911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
18.88A.4 For perxIS226911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
18.88A.5 For perxIS286911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
18.88A.6 For perxIS226911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
18.88A.7 For perxIS286911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
18.88A.8 For perxIS356911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile
18.88A.9 For 54 mm x 28 mm outer dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
18.88A.1 For perxIS356911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
18.88A.1 For perxIS426911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
MATERIALS
8806 Slip Coupling / Socket 15.88 mm outer dia SS 55 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
9567 Sleeve/ Slip Coupling/ Socket 15mm outer di 375 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88mm
18.90.1 For 304 conforming to pipe
outer dia JWWA G116 standard with V-profile or M-profile and with
MATERIALS
8812 Elbow 90° for 15.88 mm outer dia SS pipe 65 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
9573 Elbow 90° for 15mm outer dia SS pipe of gra 305 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI 304 conforming
18.91.1 For22.22 mm x 15.88 to JWWA
dia pipe
MATERIALS
8818 Reducing Elbow 90° for 22.22 mm X 15.88 mm 150 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
mm x 15.88to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
mm x 22.22tommJWWA
outerG116 standard with V-profile or M-profile and with
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm x 22.22to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm x 28.58to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 34.00to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
MATERIALS
8824 Equal Tee for 15.88 mm outer dia SS pipe 175 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
18.92.5 For 304 conforming to JWWA
mm outer dia pipe G116 standard with V-profile or M-profile and with
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
9579 Equal Tee for 15mm outer dia SS pipe of gra 500 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L
per ISdia
6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with
18.93.1 For 22.22 mm x 15.88 mm outer dia pipe
MATERIALS
8830 Reducing Tee for 22.22 mm X 15.88 mm outer 185 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
mm x 15.88to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
mm x 22.22to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm x 15.88to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm x 22.22to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm x 28.58to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 15.88to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 22.22to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 28.58to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
mm x 34.00to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 15.88to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 22.22to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 28.58to JWWA
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 34.00to JWWA
dia pipe
MATERIALS
8843 Reducing Tee for 48.60mm X 34.00 mm outer 895 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
mm x 42.70to JWWA
dia pipe
MATERIALS
8844 Reducing Tee for 48.60mm X 42.70mm outer 895 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22asmm
18.93A.1 For perxIS156911:2017
dia pipe
MATERIALS
9585 Reducing Tee for 22mm x 15mm outer dia SS 575 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
18.93A.2 For perxIS156911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
18.93A.3 For perxIS226911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
18.93A.4 For perxIS156911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
18.93A.5 For perxIS226911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
18.93A.6 For perxIS286911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
18.93A.7 For perxIS226911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
18.93A.8 For perxIS286911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
18.93A.9 For perxIS356911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
18.104.1018.93A Providing and fixing required Stainless Steel Fitting of press fit design of grade
316L54asmm
18.93A.1 For perxIS226911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
18.93A.1 For perxIS286911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
18.93A.1 For perxIS356911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
18.93A.1 For perxIS426911:2017
dia pipe
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
x 15 mmG116 standard
nominal with V-profile or M-profile and with
dia threaded
MATERIALS
8845 Stainless steel Male thread Tee for 15.88 mm 185 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
mm outer dia x 15 mmG116 standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
mm outer dia to JWWA G116
x 15 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
x 40 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
18.94.18 For 48.60 mm outer dia x 25 mm nominal dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
x15 mmG116 standard
dia threaded
MATERIALS
8866 Stainless steel Female thread Tee for 15.88 185 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
x 15 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
x 15 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
x 32 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
x 40 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
x 25 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L15asmm
18.95A.1 For perouter
IS 6911:2017
dia x 1/2"and conforming
nominal to EN-10312 standards with V-profile
dia threaded
MATERIALS
9598 Stainless steel Female thread Tee for 15mm o 560 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22mm
18.95A.2 For as perouter
IS 6911:2017
dia x 1/2" and conforming
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22mm
IS 6911:2017
dia x 3/4" and conforming
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
IS 6911:2017 and conforming
dia x 1" nominal to EN-10312 standards with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
IS 6911:2017 andnominal
dia x 1-1/4" conforming to EN-10312 standards with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
18.95A.9 For permiter
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
dia x 2" nominal to EN-10312 standards with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
dia threaded
MATERIALS
8887 Stainless steel Female threaded Connector/A 195 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
mm outer dia G116 standard
x 15 mmnominal with V-profile or M-profile and with
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
x 25 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
18.96.10 For 42.70 mm outer dia x 40 mm nominal dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L15asmm
IS 6911:2017
dia x 1/2"and
mmconforming tothreaded
nominal dia EN-10312 standards with V-profile
MATERIALS
9609 Stainless steel Female threaded Connector/Ad 440 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22asmm
IS 6911:2017
dia x 1/2"and
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22asmm
IS 6911:2017
dia x 3/4"and
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
IS 6911:2017
dia X 1" and conforming
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
dia X 1-1/4" conforming to EN-10312 standards with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
dia X 1-1/2" conforming to EN-10312 standards with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
x 15 mm standard
dia threaded
MATERIALS
8899 Stainless steel Male threaded Connector/Ada 195 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
8901 Stainless steel Male threaded Connector/Adap 255 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
x 20 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
x 40 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
18.111.1 18.97A Providing and fixing required Stainless Steel Fitting o1 press fit design of grade
316L15asmm
IS 6911:2017 and
dia X 1/2" conforming
nominal to EN-10312 standard with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22asmm
IS 6911:2017 and
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22asmm
IS 6911:2017 and
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35asmm
dia X 1-1/4" conforming to EN-10312 standard with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42asmm
dia X 1-1/2"nominal to EN-10312 standard with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54asmm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
dia threaded
MATERIALS
8910 Stainless steel Valve Connector for 15.88 mm 235 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
x 50 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
dia threaded
MATERIALS
8917 SS Female Threaded Elbow 90o for 15.88 mm 160 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
8918 Stainless steel Female Threaded Elbow 90o f 215 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI25.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
x 40 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L15asmm
IS 6911:2017 and
dia threaded
MATERIALS
9623 Stainless steel Female threaded Elbow 90° fo 640 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile
18.99A.2 For 22 mm outer dia X 3/4" nominal dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28mm
dia X 1" nominal to EN-10312 standard with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35mm
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42mm
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54mm
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
x 15 mm standard
dia threaded
MATERIALS
8926 Stainless steel Male Threaded Elbow 90o for 195 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
8927 Stainless steel Male Threaded Elbow 90o for 225 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
dia threaded
MATERIALS
8928 Stainless steel Male Threaded Elbow 900 for 225 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
dia threaded
MATERIALS
8930 Stainless steel MaleThreaded Elbow 900 for 290 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
x 32 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
x 40 mm standard
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
18.100.10For 304 conforming
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L15mm
18.100A. For as perouter
IS 6911:2017
dia X 1/2"and conforming
dia threaded
MATERIALS
9629 Stainless steel Male threaded Elbow 90° for 525 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22mm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28mm
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35mm
IS 6911:2017 and
dia X 1-1/4" conforming
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42mm
IS 6911:2017 and
dia X 1-1/2" conforming
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54mm
dia X 2" mm conforming to EN-10312 standard with V-profile
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
MATERIALS
8936 Stainless steel Cap for 15.88 mm outer dia pi 48 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI34.00
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI42.70
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI48.60
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L15as'per
18.101A. For IS 6911:2017
mm outer dia pipe and conforming to EN-10312 standard with V-profile
MATERIALS
9635 Stainless steel Cap for 15mm outer dia pipe 320 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22as'per
18.101A. For IS 6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28as'per
18.101A. For IS 6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35as'per
18.101A. For IS 6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42as'per
18.101A. For IS 6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L54as'per
18.101A. For IS 6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI15.88
MATERIALS
8942 Stainless steel Pipe Bridge for 15.88 mm outer 220 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI22.22
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
AISI28.58
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L15asmm
18.102A. For perouter
IS 6911:2017
dia pipe and conforming to EN-10312 standard with V-profile
MATERIALS
9641 Stainless steel Pipe Bridge for 15mm outer d 415 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22asmm
IS 6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28asmm
IS 6911:2017
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L15mm
18.103.1 For as perouter
IS 6911:2017
dia threaded
MATERIALS
9644 Stainless steel Male Union for 15mm outer d 885 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22mm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22mm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28mm
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L35mm
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L42mm
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile
18.103.7 For 54mm outer dia X 2" nominal dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22asmm
18.104.1 For perouter
IS 6911:2017 and
dia threaded
MATERIALS
9651 Stainless steel Female Union for 22mm outer 950 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L28mm
dia threaded
MATERIALS
9652 Stainless steel Female Union for 28mm outer 1280 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L15mm
IS 6911:2017
dia threaded
MATERIALS
9653 Stainless steel Female Transition Elbow/ FTE 649 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22mm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
316L22mm
IS 6911:2017
dia threaded
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no
Say
19.1.1 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff
19.1.1 100mixture
mm of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)
diameter
MATERIAL
1854 Stoneware pipes grade A (60 cm long) 100 m 70 each
Added 10% allowance for breakage
2224 Carriage of S.W. pipes 100 mm dia 218.58 100 metre
Cement for 50 joints = 0.019 tonne
or plain gaskin @ 0.09 kg per joint = 0.09x50 = 4.50 kg
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost for 1 metre
Say
mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)
MATERIAL
Cement of 50 joints = 0.036 tonne
or plain gaskin @ 0.18 kg per joint = 0.18x50 = 9 kg
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost for 1 metre
Say
19.1.3 200mixture
diameter
MATERIAL
Added 10% allowance for breakage in items (I) & (ii)
or plain gaskin @ 0.24 kg per joint = 0.24x50 =12.00 kg
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost for 1 metre
Say
19.1.4 250mixture
diameter
MATERIAL
or plain gaskin @ 0.30 kg per joint = 0.30x50= 15.00 kg
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost for 1 metre
Say
19.1.5 300mixture
diameter
MATERIAL
or plain gaskin @ 0.36 kg / joint = 0.36x50 =18.00 kg
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost for 1 metre
Say
19.2.1 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10
graded
19.2.1 100 mmstone aggregate
diameter 40 mm nominal size) all-round S.W. pipes including bed
S.W. pipe
Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 100 + 12 + 12 = 124 mm or 12.4 cm
X = 300 mm as trench depth is less than 1200 mm
W = 12.4 + 30 = 42.4
Area=
= 42.4² x ( 0.5 + 3.14/ 8) - (3.14 x 12.4²/4)
= 1484 sqcm = 0.1484 sqm Say 0.148 sqm
For 10 m length qty. of concrete reqd. = 1.48 cum
Cost of 10 metres
Cost per metre
Say
19.2.2 150graded
mmstone aggregate
S.W. pipe
Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 150 + 16 + 16 = 182 mm or 18.2 cm
W = 18.2 + 30 = 48.2
Area
= 48.2² x ( 0.5 + 3.14/ 8) - (3.14 x 18.2 ²/4)
= 1807.66 sqcm = 0.1808 sqm Say 0.181 sqm
Cost of 10 metres
Cost per metre
Say
graded
S.W. pipe
Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 200 + 17 + 17 = 234 mm or 23.4 cm
W = 23.4 + 30 = 53.4
Area
= 53.4² x ( 0.5 + 3.14 / 8) - (3.14 x 23.4²/4)
= 2115 sqcm = 0.2115 sqm Say 0.211 sqm
Cost of 10 metres
Cost per metre
Say
19.2.4 250graded
mmstone aggregate
S.W. pipe
Area = W x W/2 + ½ x (3.14 x W² / 4) - (3.14 x D² / 4)
= W² x (0.5 + 3.14 / 8) - (3.14 x D² / 4)
Where W = D + X
D = 250 + 20 + 20 = 290 mm or 29.0 cm
W = 29 + 30 = 59
Area
= 59² x ( 0.5 + 3.14/ 8) - (3.14 x 29²/4)
= 2447 sqcm = 0.2447 sqm. Say 0.244 sqm
Cost of 10 metres
Cost per metre
Say
graded
diameter 40 mm nominal size) up to haunches of S.W. pipes
S.W. pipe
Area = WxD1 + 2x½xR Cot QxR - [R²/2(3.14/2-Q)] - (3.14/2)R²
= WD1 + R²(Cot Q) - R²(3.14/2 - Q) - (3.14/2)R²
= WD1+R²(cot Q-3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 100 + 12 + 12 = 124 mm
W = 124 + 300 = 424 mm
D1 = Depth = 100 + (½ x 124) = 162 mm
R = 62 mm
Sin Q = (2x62)/424 = 0.292 therefor Q = 17°0'
Hence Tan Q = 0.3057
Area = 424 x 162 + (62)² (Cot Q - 3.14 + Q)
= [68688 + 3844 (1/0.3057 - 180° + 17°0')] sqmm
= [68688 + 3844 (3.27 - 163°0' x 3.14/180)] sqmm
= (68688 + 3844 x 0.43) sqmm
= (68688 + 1652.92) sqmm = 70340.92 sqmm
Say 70341 sqmm or 0.070341 sqm
For 10 m length qty. of concrete reqd. = 0.07034x10 = 0.7034 cum
Cost of 10 metres
Cost per metre
Say
graded
S.W. pipe
Details of cost for 10 metre length pipe
= WD1 + R²(Cot Q) - R²(3.14/2 - Q) - (3.14/2)R²
= WD1 + R²(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 150 + 16 + 16 = 182 mm
W = 182 + 300 = 482 mm
D1 = Depth = 150 + (½ x 182) = 241 mm
R = 91 mm
Sin Q = (2x91)/482 = 0.3776 therefor Q = 22°12'
Area = 482 x 241 + (91)² (Cot Q - 3.14 + Q)
= [116162 + 8281 (1/0.4081 - 180° + 22°12')] sqmm
= [116162 + 8281 (2.45 - 157°48' x 3.14/180)] sqmm
= [116162 + 8281 x (2.45-2.75)] sqmm

= [116162 + 8281 x (-0.30)] sqmm
= (116162 - 2484.3) sqmm = 113677.7 sqmm
Say 113677.7 sqmm or 0.1136777 sqm
For 10 m length qty. of concrete reqd. = 0.1136777x10 = 1.136777 cu
Cost of 10 metres
Cost per metre
Say
graded
S.W. pipe
= WD1 + R²(Cot Q) - R²(3.14/2 - Q) - (3.14/2)R2
= WD1 + R²(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 200 + 17 + 17 = 234 mm
W = 234 + 300 = 534 mm
D1 = Depth = 150 + (½ x 234) = 267 mm
R = 117 mm
Sin Q = (2x117)/534 = 0.4382 therefor Q = 26°0'
Area = 534 x 267 + (117)² (Cot Q - 3.14 + Q)
= [142578 + 13689 (1/0.4877 - 180° + 26°0')] sqmm
= [142578 + 13689 (2.05 - 154°0' x 3.14/180)] sqmm
= [142578 + 13689 x (2.05-2.69)] sqmm

= [142578 + 13689 x (-0.64)] sqmm
= (142578 - 8760.96) sqmm = 133817.04 sqmm
Cost of 10 metres
Cost per metre
Say
graded
S.W. pipe
= WD1 + R²(Cot Q) - R²(3.14/2 - Q) - (3.14/2)R2
= WD1 + R²(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 250 + 20 + 20 = 290 mm
W = 290 + 300 = 590 mm
D1 = Depth = 150 + (½ x 290) = 295 mm
R = 145 mm
Sin Q = (2x145)/590 = 0.49154 therefor Q = 29°26'
Area = 590 x 295 + (145)² (Cot Q - 3.14 + Q)
= [174050 + 21025 (1/0.5635 - 180° + 29°26')] sqmm
= [174050 + 21025 (1.77 - 150°34' x 3.14/180)] sqmm
= [174050 + 21025 x (1.77-2.63)] sqmm

= [174050 + 21025 x (-0.86)] sqmm
= (174050 - 18081.5) sqmm = 155968.5 sqmm
Cost of 10 metres
Cost per metre
Say
graded
S.W. pipe
= WD1 + R²(Cot Q) - R²(3.14/2 - Q) - (3.14/2)R2
= WD1 + R²(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 300 + 25 + 25 = 350 mm
W = 350 + 300 = 650 mm
D1 = Depth = 150 + (½ x 350) = 325 mm
R = 175 mm
Sin Q = (2x175)/650 = 0.5385 therefor Q = 32°34'
Area = 650 x 325 + (175)² (Cot Q - 3.14 + Q)
= [211250 + 30625 (1/0.6387 - 180° + 32°34')] sqmm
= [211250 + 30625 (1.566 - 147°26' x 3.14/180)] sqmm
= [211250 + 30625 x (1.566-2.571)] sqmm

= [211250 + 30625 x (-1.005)] sqmm
= [211250 - 30778.13) sqmm = 180471.87 sqmm
Say 0.180 sqm
Cost of 10 metres
Cost per metre
Say
19.4.1.1 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.
grating brick
19.4.1 100x100 masonry
mm size chamber with water tight C.I. cover with frame of 300 x300
P type
19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Details of cost of one gully tarp
1900 S.W. gully trap P type 100x100 mm 115 each
1364 C.I. grating 100x100 mm 40 each
1352 C.I. cover and frame 300x300 mm inside 480 each
Cement concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone ag
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.345÷3x[0.09+0.01+(0.09x0.01)1/2] = 0.015 cum
3.14/4x(0.124)²x0.47 = 0.006 cum
Total= 0.021 cum
Net quantity 0.107 cum (-) 0.021 cum
= 0.086 cum say 0.09 cum
Brick work with 75 class designation brick in cement mortar 1:4 (1 cem
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone a
1.66x0.115x0.04 m = 0.008 cum
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with floa
[1/2x0.358x(1.20+0.40)] = 0.286 sqm say 0.29 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 trap
Say
grating brick
19.4.1 100x100 masonry
P type
19.4.1.2 With Sewer bricks conforming to IS : 4885
Detaila of cost of one gully tarp
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.345÷3x[0.09+0.01+(0.09x0.01)1/2] = 0.015 cum
3.14/4x(0.124)²x0.47 = 0.006 cum
Total = 0.021 cum
= 0.086 cum say 0.09 cum
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
6.36.1 Rate as per item No 6.36.1 of SH : Brick Work 6446.1 cum
1.66x0.115x0.04 m = 0.008 cum
[1/2x0.358x(1.20+0.40)] = 0.286 sqm say 0.29 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 trap
Say
19.4.2 150grating
x 100brick
mmmasonry chamber with water tight C.I. cover with frame of 300 x300
size P type
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total =0.107 cum
Deduct:
0.322÷3x[0.09+0.023+(0.09x0.023)1/2] = 0.017 cum
3.14/4x(0.124)²x0.485 = 0.006 cum
Total = 0.023 cum
= 0.084 cum say 0.08 cum
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
1.66x0.115x0.04 m = 0.008 cum
[1/2x0.337x(1.20+0.60)] = 0.303 sqm say 0.30 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 trap
Say
19.4.2 150grating
x 100brick
mmmasonry chamber with water tight C.I. cover with frame of 300 x300
size P type
19.4.2.2 With sewer bricks conforming to IS : 4885
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total =0.107 cum
Deduct:
0.322÷3x[0.09+0.023+(0.09x0.023)1/2] = 0.017 cum
3.14/4x(0.124)²x0.485 = 0.006 cum
Total= 0.023 cum
= 0.084 cum say 0.08 cum
Brick work with sewer bricks conforming to IS:4885 in cement mortar 1
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
1.66x0.115x0.04 m = 0.008 cum
[1/2x0.337x(1.20+0.60)] = 0.303 sqm say 0.30 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 trap
Say
grating brick
19.4.3 180x150 masonry
P type
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.155÷3x[0.09+0.032+(0.09x0.032)1/2] = 0.008 cum
3.14/4x(0.182)²x0.70 =0.018 cum
Total= 0.026 cum
= 0.081 cum say 0.08 cum
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
1.66x0.115x0.04 m =0.008 cum
[1/2x0.166x(1.20+0.72)] = 0.159 sqm say 0.16 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 trap
Say
grating brick
19.4.3 180x150 masonry
P type
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.155÷3x[0.09+0.032+(0.09x0.032)1/2] = 0.008 cum
3.14/4x(0.182)²x0.70 =0.018 cum
Total= 0.026 cum
= 0.081 cum say 0.08 cum
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
1.66x0.115x0.04 m =0.008 cum
[1/2x0.166x(1.20+0.72)] = 0.159 sqm say 0.16 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 trap
Say
19.5.1 19.5 Dismantling of old S.W. pipes including breaking of joints and bed concrete
stacking
19.5.1 100 of useful materials near the site within 50 m lead and disposal of
mm diameter
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stacking
mm diameter
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stacking
mm diameter
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stacking
mm diameter
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stacking
mm diameter
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stacking
mm diameter
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stacking
mm diameter
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
stacking
mm diameter
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.1 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with
19.6.1 100collars
mmjointed with pipe
dia. R.C.C. stiff mixture of cement mortar in the proportion of 1:2 (1
MATERIAL
1700 R.C.C. pipes NP2 class 100 mm dia 210 metre
(in 2 m. length = 5 Nos.)
1714 R.C.C. collars NP2 class 100 mm dia 35 each
5 Nos.
Cement of 5 joints = 5x0.00065 = 0.00325 cum = 0.0048 t say 0.005 t
Fine sand for 5 joint = 0.0013x5 = 0.0065 cum = 0.006 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.2 150collars
mmjointed with pipe
MATERIAL
5 Nos.
Cement of 5 joints = 5x0.0008 = 0.004 cum = 0.006 tonne
Fine sand for 5 joint = 0.0016x5 = 0.008 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.3 250collars
mmjointed with pipe
MATERIAL
5 Nos.
Cement of 5 joints = 5x0.0012 = 0.006 cum = 0.009tonne
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.4 300collars
mmjointed with pipe
MATERIAL
(in 2.5 m. length = 4 Nos.)
4 Nos.
Fine sand for 4 joint = 0.0037x4 = 0.0148 say 0.015cum = 0.006 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.5 450collars
mmjointed with pipe
MATERIAL
4 Nos.
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 3981.36 100 metre
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.6 500collars
mmjointed with pipe
MATERIAL
4 Nos.
Fine sand for 4 joints = 0.0089x4 = 0.0356 cum = 0.036 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.7 600collars
mmjointed with pipe
MATERIAL
4 Nos.
2303 Carriage of R.C.C. pipes 600, 700, 750 & 80 5972.04 100 metre
Fine sand for 4 joints = 0.0108x4 = 0.043 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.8 700collars
mmjointed with pipe
MATERIAL
4 Nos.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.6.9 800collars
mmjointed with pipe
MATERIAL
4 Nos.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
collars
19.6.10 900 mmjointed with pipe
MATERIAL
4 Nos.
Cement of 4 joints = 4x0.0082 = 0.0328 cum = 0.0488 t Say 0.049
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
collars
19.6.11 1000 mmjointed with stiff
dia. R.C.C. pipemixture of cement mortar in the proportion of 1:2 (1
MATERIAL
4 Nos.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
collars
MATERIAL
4 Nos.
Cement of 4 joints = 4x0.0103 =0.0412 cum = 0.061 tonne
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
collars
MATERIAL
4 Nos.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 metre
Cost for 1 metre
Say
19.7.1.1 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse
sand ) size
19.7.1 Inside with 90x80
R.C.C.cm topand
slab45with
cm 1:1.5:3 mix (1 cement
deep including : 1.5with
C.I. cover coarse sand
frame (zone-III)
(light duty)
455x610
19.7.1.1 With mm internal
common dimensions,
burnt clay total
F.P.S. (non weight bricks
modular) of cover
of and
classframe to be not7.5
designation less
Details of cost for 1 manhole
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
Brick work with bricks of class designation 75 in foundation & plinth i
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14x(0.15m)²x0.23m = (-) 0.008 cum
Total = 0.340 cum
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15m)² = (-) 0.02 cum
= 0.16 cum
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete W 7365.15 cum
3.40mx0.05m = 0.17 sqm
2x½x0.80x0.10m = 0.08 sqm
Total= 0.25 sqm
Reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 grad
For slab : 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042 cum
= 0.215 cum Say 0.22 cum
5.3 Rate as per item no 5.3 of SH : RCC Work 10719.35 cum
Less labour for not lifting the materilas upto

floor five level
115 Coolie 645 Day
Mild steel reinforcement for slab :
0.22 cum @ 48.06 kg/cum = 10.57 kg
Form work = 0.90x0.80 = 0.72 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
= 0.442 sqm Say 0.44 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC Work 761.8 sqm
LABOUR
Extra labour for making channel :
1354 Rectangular cover 455x610 mm with frame (lo 1400 each
(inside)
9977 Carriage of C.I. cover & frame 2.12 L.S.
9999 Painting of C.I. cover & frame with coal tar 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.7.1 sand
Inside) size
with 90x80
R.C.C.cm topand
slab45with
cm 1:1.5:3 mix (1 cement
deep including : 1.5with
C.I. cover coarse sand
frame (zone-III)
(light duty)
19.7.1.2 455x610
With mm
Sewer internal
bricks dimensions,
conforming to total
IS : weight
4885 of cover and frame to be not less
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
4.32x0.23x0.35 m = 0.348 cum
Total= 0.340 cum
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Total= 0.16 cum
3.40mx0.05m = 0.17 sqm
2x½x0.80x0.10m = 0.08 sqm
Total= 0.25 sqm
For slab : 1.36x1.26x0.15m = 0.257 cum
= 0.215 cum Say 0.22 cum

floor five level
115 Coolie 645 Day
0.22 cum @ 48.06 kg/cum = 10.57 kg
Form work = 0.90x0.80 = 0.72 sqm
= 0.442 sqm Say 0.44 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
LABOUR
(inside)
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
sand ) size
R.C.C. top
cm slab with
and 90 cm1:1.5:3 mix (1 cement
deep including : 1.5 coarse
C.I. cover sand(medium
with frame (zone-III)
duty)common
19.7.2.1 With 500 mm internal diameter,
burnt clay totalmodular)
F.P.S. (non weight ofbricks
cover ofand frame
class to be not less
designation 7.5
MATERIAL
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
5.12x0.23x0.80 m = 0.942 cum
Total= 0.934 cum Say 0.93 cum
2x1.20x(0.90/2) x (0.30+0.20)/2 = 2.70 cum
Less for pipe 1.20x3.14/4x(0.15m)² = (-) 0.021 cum
Total= 0.249 cum say 0.25
4.20mx0.50m = 2.10 sqm
2x½x0.90x0.10m = 0.08 sqm
= 2.19 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.50)²x0.15m = (-) 0.029 cum
= 0.31 cum

floor five level
115 Coolie 645 Day
0.31 cum @ 80.09 kg/cum = 24.83 kg
Form work = 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)² = (-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
LABOUR
1356 500 mm dia cover with frame (medium duty) 4400 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
sand ) size
R.C.C. top
cm slab with
C.I. cover sand(medium
duty) 500 mm internal diameter, total
19.7.2.2 With Sewer bricks conforming to IS : 4885 weight of cover and frame to be not less
MATERIAL
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
5.12x0.23x0.80 m = 0.942 cum
= 0.934 cum Say 0.93 cum
2x1.20x(0.90/2) x (0.30+0.20)/2 = 2.70 cum
= 0.249 cum say 0.25
4.20mx0.50m = 2.10 sqm
2x½x0.90x0.10m = 0.08sqm
= 2.19 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum
= 0.31 cum

floor five level
115 Coolie 645 Day
0.31 cum @ 80.09 kg/cum = 24.83 kg
Form work = 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)² = (-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
LABOUR
1356 500 mm dia cover with frame (medium duty) 4400 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
sand ) size
R.C.C. top
cm slab with
C.I. cover sand(heavy
duty)common
19.7.3.1 With 560 mm internal diameter,
burnt clay totalmodular)
F.P.S. (non weight ofbricks
cover ofand frame
class to be not less
designation 7.5
MATERIAL
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m = 0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
= 0.811 cum
= 0.803 cum Say 0.80 cum
2x1.20x(0.90/2)x(0.30+0.20)/2 = 2.70 cum
= 0.249 cum say 0.25
4.20mx0.35m = 1.47 sqm
2x0.56x0.15 m = 0.17 sqm
2x½x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
= 2.652 sqm
Less cover 3.14/4x(0.56)² = (-) 0.246 sqm
= 2.406 sqm Say 2.41 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum
Add extra concreting 1x(0.56+0.79)x0.15x0.15 m = 0.03 cum
Total= 0.369 cum
= 0.332 cum Say 0.33 cum

floor five level
115 Coolie 645 Day
Steel reinforcement for slab @ 80.09 Kg/cum
For 0.33 cum = 26.43 kg.
Form work inside area of man-hole 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)² = (-) 0.246 sqm
= 0.834 sqm Say 0.83 sqm
LABOUR
3860 560 mm dia cover with frame (Heavy duty) 9100 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
sand ) size
R.C.C. top
cm slab with
C.I. cover sand(heavy
duty)Sewer
19.7.3.2 With 560 mm internal
bricks diameter,tototal
conforming weight of cover and frame to be not less
IS : 4885
MATERIAL
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
sewer bricks conforming to IS:4885 in cement mortar 1:4 (1 cement :4
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m = 0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
Total= 0.811 cum
= 0.803 cum Say 0.80 cum
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.27 cum
= 0.249 cum say 0.25
4.20mx0.35m = 1.47 sqm
2x0.56x0.15 m = 0.17 sqm
2x½x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
Total= 2.652 sqm
Less cover 3.14/4x(0.56)² = (-) 0.246 sqm
= 2.406 sqm Say 2.41 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum
Add extra concreting 1x(0.56+0.79)x0.15x0.15 m = 0.03 cum
= 0.369 cum
= 0.332 cum Say 0.33 cum
Less labour for not lifting the materilas upto floor five level
115 Coolie 645 Day
Steel reinforcement for slab @ 80.09 Kg/cum
For 0.33 cum = 26.43 kg
Form work inside area of man-hole 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)² = (-) 0.246 sqm
= 0.834 sqm Say 0.83 sqm
LABOUR
3860 560 mm dia cover with frame (Heavy duty) 9100 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.8.1.1 19.8 Extra for depth for manholes :

19.8.1 Size 90x80 cm
Details of cost for one meter
MATERIAL
4.32x0.23x1.0 m = 0.994 cum Say 0.99 cum
6.1.1 Rate as per item no. 6.1.1 of S.H : brick work 6788.1 cum
12 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with flo
3.40x1 m = 3.40 sqm
TOTAL
Cost for one metre
Say

19.8.1 Size 90x80 cm
MATERIAL
Brick work with modular extruded brunt fly ash clay sewer bricks confo
4.32x0.23x1.0 m = 0.994 cum Say 0.99 cum
3.40x1 m = 3.40 sqm
TOTAL
Cost for one metre
Say

19.8.2 Size 120x90 cm
MATERIAL
5.12x0.23x1.0 m = 1.178 cum Say 1.18 cum
6.1.1 Rate as per item no. 6.1.1 of S.H : brick work 6788.1 cum
4.20x1 m = 4.20 sqm
TOTAL
Cost for one metre
Say

19.8.2 Size 120x90 cm
MATERIAL
Brick work with modular extruded brunt fly ash clay sewer bricks confo
5.12x0.23x1.0 m = 1.178 cum Say 1.18 cum
4.20x1 m = 4.20 sqm
TOTAL
Cost for one metre
Say
19.9.1.1 19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom
19.9.1 and
0.91 0.56m
m deep dia at top
with in cement
S.F.R.C. covermortar 1:4 (1
and frame cement
(heavy : 4 coarse
duty, sand),designation
HD-20 grade inside
560 mm
19.9.1.1 With internal
common diameter
burnt conforming
clay F.P.S. to I.S. 12592,
(non modular) brickstotal weight
of class of cover and
designation 7.5
MATERIAL
1.67x1.67x0.225 m = 0.63 cum
Curved on plan
3.14x1.14x0.074x0.23 = 0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
Total= 0.557
Duduct arch ring and portion of pipe
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
Brick work in foundation with 75 class designation brick in cement morta
2x½x3.14x0.25 m x0.230x0.10 m = 0.018 cum Say 0.02 cum
6.9 Rate as per item no 6.9 of SH : Brick Work 13029.8 cum
Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone agg
For benching :
3.14/4x(0.91+0.82)²x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)³ =0.017 cum
Total = 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)2² = (-) 0.016 cum
= 0.119 cum Say 0.12 cum
For fixing cover : 3.14/4 x d² x thickness
3.14/4x(1.020)²x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m = (-) 0.037 cum
Total = 0.086 cum Say 0.09 cum
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)²/4-0.80x0.15+0.80x½x3.14x0.15 = 0.57 sqm
Total= 1.75 sqm
LABOUR
S.F.R.C cover
7135 Circular shape 560 mm dia precast R.C.C. man 880 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.9.1.2 19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom
and 0.56m
19.9.1 0.91 m deep dia at top
with in cement
S.F.R.C. covermortar 1:4 (1
and frame cement
(heavy : 4 coarse
duty, sand),designation
HD-20 grade inside
560 mm
19.9.1.2 With internal
Sewer bricksdiameter conforming
conforming to I.S. 12592, total weight of cover and
to IS : 4885
MATERIAL
1.67x1.67x0.225 m = 0.63 cum
Curved on plan
3.14x1.14x0.074x0.23 = 0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
= 0.557
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
Brick work in arches with modular extruded brunt fly ash clay sewer bri
6.37 Rate as per item No 6.37 of SH : Brick Work 11468.6 cum
For benching :
3.14/4x(0.91+0.82)²x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)³ =0.017 cum
Total= 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)² = (-) 0.016 cum
3.14/4x(1.020)²x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m = (-) 0.037 cum
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)²/4-0.80x0.15+0.80x½x3.14x0.15 = 0.57 sqm
Total= 1.75 sqm
LABOUR
S.F.R.C cover
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.10.1 19.1 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91
m to 1.67
19.10.1 With m burnt clay F.P.S. (non modular) bricks of class designation 7.5
common
Detail of cost of 0.76 m depth
Brick work in foundation with 75 class designation bricks in cement mo
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone 20
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with nea
Cost for 0.76 metre
Cost for 1.00 metre
Say
19.10.2 19.1 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91
m to 1.67
19.10.2 With Sewerm bricks conforming IS : 4885
Detail of cost of 0.76 m extra depth
Brick work with modular exturded burnt fire clay bricks in cement mont
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone 20
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with float
Cost for 0.76 metre
Cost for 1.00 metre
Say
19.11.1.1 19.11 Constructing brick masonry circular manhole 1.22 m internal dia at bottom and
0.56 m deep
19.11.1 1.68 dia atwith
top in cement
SFRC Covermortar 1:4 (1 cement
and frame :4 coarse
(heavy duty HD-20sand)
gradeinside cement
designation)
19.11.1.1With common burnt clay F.P.S. (non modular) bricks of class designationand
560 mm internal diameter conforming to I.S. 12592, total weight of cover 7.5
MATERIAL
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
Total= 1.320
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total = 0.026 cum
Net quantity 1.320-0.026 = 1.294 Say 1.29 cum
Brick work in arches with 75 class designation brick in cement mortar 1:
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³ =0.043 cum
Total= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-) = 0.0216 cum
3.14/4x(1.020)²x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)² x 0.15 m : (-) = 0.037 cum
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)²/4-1.136x1/2x3.14x0.15 = 1.112 sqm
Total= 4.483 sqm Say 4.48 sqm
LABOUR
S.F.R.C manhole cover
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.11.1 0.56
1.68 m dia
deepatwith
top in cement
SFRC mortar
Cover 1:4 (1 cement
and frame :4 coarse
(heavy duty HD-20sand)
gradeinside cement
designation)
560 mm
19.11.1.2With internal
Sewer bricks diameter conforming
conforming IS : 4885to I.S. 12592, total weight of cover and
MATERIAL
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
Brick work with modular extruded brunt fly ash clay sewer bricks in ce
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
Total = 1.320
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.230 = 0.008 cum
Total= 0.026 cum
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³ =0.043 cum
Total= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-) = 0.0216 cum
3.14/4(1.020)²x0.15 m =0.123 cum
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)²/4-1.136x1/2x3.14x0.15 = 1.112 sqm
LABOUR
S.F.R.C manhole cover and frame
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
19.12.1 19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68
m to 2.29
19.12.1 With m : burnt clay F.P.S. (non modular) bricks of class designation 7.5
common
Cost for 0.61 metre
Cost for 1.00 metre
Say
m to 2.29
19.12.2 With Sewerm bricks
: conforming IS : 4885
Brick work with modular exturded burnt fire clay bricks in cement mont
Cost for 0.61 metre
Cost for 1.00 metre
Say
0.56 m deep
19.13.1 2.30 dia atwith
top in cement
SFRC mortar
Cover 1:4 (1 cement
and frame : 4 coarse
(heavy duty HD- 20sand)
gradeinside cement
designation)
19.13.1.1With common burnt clay F.P.S. (non modular) bricks of class designationand
560 mm internal diameter conforming to I.S. 12592, total weight of cover 7.5
MATERIAL
2.74x2.74x0.30 m = 2.25 cum
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345x1.93 = 3.019 cum
Total = 3.735 cum
2x½x3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)²x0.460 = 0.016 cum
Total= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum Say 3.68 cum
Brick work in arches with 75 class designation brick in cement mortar 1:
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036 cum Say 0.04 cum
For benching :
3.14/4x(1.52)²x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76)³ =0.083 cum
Total= 0.446 cum
Less pipe :1.52x3.14/4x(0.15)²(-) = 0.027 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete 7365.15 cum
3.14/4x(1.020)²x0.15 m =0.123 cum
3.14x(1.454+0.56)/2x1.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)²/4-1.454x0.15+1.454x1/2x3.14x0.15 =1.786 sqm
Total= 7.61 sqm
LABOUR
S.F.R.C cover
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
0.56 m deep
19.13.1 2.30 dia atwith
top in cement
SFRC mortar
Cover 1:4 (1 cement
and frame : 4 coarse
(heavy duty HD- 20sand)
gradeinside cement
designation)
560 mm
19.13.1.2With internal
Sewer diameter
bricks conforming
conforming IS : 4885to I.S. 12592, total weight of cover and
MATERIAL
2.74x2.74x0.30 m = 2.25 cum
Brick work with bricks modular extruded brunt fly ash clay sewer brick
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345x1.93 = 3.019 cum
Total= 3.735 cum
2x½x3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)²x0.460 = 0.016 cum
Total= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum Say 3.68 cum
For benching :
3.14/4x(1.52)²x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76)³ =0.083 cum
Total= 0.446 cum
Less pipe :1.52x3.14/4x(0.15)²(-) = 0.027 cum
= 0.419 cum Say 0.42 cum
4.1.3 Rate as per item no. 4.1.3 of SH : concrete 7365.15 cum
3.14/4x(1.020)²x0.15 m =0.123 cum
Net Quantity= 0.086 cum Say 0.09 cum
3.14x(1.454+0.56)/2x1.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)²/4-1.454x0.15+1.454x1/2x3.14x0.15 =1.786 sqm
Total= 7.61 sqm
LABOUR
S.F.R.C cover
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one manhole
Say
m : common burnt clay F.P.S. (non modular) bricks of class designation 7.5
19.14.1 With
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floa
Cost for 1.88 metre
Cost for 1.00 metre
Say
m : Sewer bricks conforming IS : 4885
19.14.2 With
Brick work with modular exturded burnt fly ash bricks in cement mortar
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with floa
Cost for 0.61 metre
Cost for 1.00 metre
Say
19.15.1 19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement
concrete
19.15.1 With 20x20 blocks 1:3:6 (1bar
mm square cement : 3 coarse sand : 6 graded stone aggregate 20
Details of cost for one M.S foot rests
MATERIAL
M.S. 20 mm square bar 0.75 m @ 3.137 kg/m
1006 Mild steel square bars 4850 quintal
9988 Carriage, painting, and other sundries 2.12 L.S.
LABOUR for fabrication
114 Beldar 645 Day
Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone a
0.20x0.20x0.10 m = 0.004 cum
LABOUR for fixing M.S. foot rests
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.15.2 19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement
concrete
19.15.2 With 20 mm blocks 1:3:6 round
diameter (1 cement
bar : 3 coarse sand : 6 graded stone aggregate 20
MATERIAL
M.S. round brass20 mm dia 0.75 m @ 2.47kg 1 m = 0.018 q
9988 Carriage,painting, and other sundries 2.12 L.S.
114 Beldar 645 Day
0.20x0.20x0.10 m = 0.004 cum
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.16 19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic
Code encapsulated as per IS : 10910, on 12 mm dia
Description steel bar conforming
Rate Unit to IS: 1786,
MATERIAL
7354 Plastic encapsuled M.S. foot rest 30x20x15 c 110 each
9988 Carriage and other sundries 2.12 L.S.
Cement concrete 1:3:6 ( 0.30x0.20x15 = 0.009 cum)
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.17.1 19.17 Replacement of M.S. foot rests in manholes including dismantling concrete
blocks
19.17.1 With and fixing
20x20 with 20x20x10
mm square bar cm cement concrete blocks 1:3:6 (1 cement : 3
MATERIAL
M.S. 20 mm square bar 0.75 m @ 3.137 kg/m =0.024 q
1006 Mild steel square bars 4850 quintal
114 Beldar 645 Day
0.20x0.20x0.10 m = 0.004 cum
LABOUR
for dismantling old forts rest cutting holes
and fixing new M.S. foot rests
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.17.2 19.17 Replacement of M.S. foot rests in manholes including dismantling concrete
blocks
19.17.2 With 20and
mmfixing withround
diameter 20x20x10
bar cm cement concrete blocks 1:3:6 (1 cement : 3
MATERIAL
M.S. roumd bars 20 mm dia 0.75 m @ 2.47 kg/m =0.018 q
114 Beldar 645 Day
0.20x0.20x0.10 m = 0.004 cum
LABOUR
for dismantling old forts rest cutting holes
and fixing new M.S. foot rests
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.18.1 19.18 Supplying and fixing C.I. cover without frame for manholes :
19.18.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not
Code less than 23 kg
Details of cost for one cover
MATERIAL
1355 Rectangular cover 455x610mm without frame 910 each
9977 Carriage of C.I. Manhole cover 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cover
Say
19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less
Code than 58 kg
MATERIAL
1357 500 mm dia cover without frame (medium duty 2300 each
9977 Carriage of C.I. cover 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.18.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less
Code than 108 kg
MATERIAL
3861 560 mm dia cover without frame (Heavy duty) 5100 each
9977 Carriage of C.I. cover 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.1.1 19.19 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of
19.19.1 Lrequired
D- 2.5 shape and approved quality
19.19.1.1Rectangular shape 600x450 mm internal dimensions
MATERIAL
7130 Rectangular shape 600x450 mm precast R.C.C. 675 each
Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 grade stone agg
1.00x0.85x0.15 = 0.1275 cum
Less cover with frame
0.85x0.70x0.15 = (-) 0.0893 cum
= 0.0382 cum Say 0.04 cum
9977 Carriage of R.C.C cover with frame 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.1 Lrequired
19.19.1.2Square shape 450 mm internal dimensions
MATERIAL
7131 Square shape 450x450 mm precast R.C.C. manh 575 each
9977 Carriage of manhole cover 2.12 L.S.
0.725x0.725x0.15 = 0.0788 cum
0.575x0.575x0.15 = (-) 0.0496 cum
= 0.0292 cum Say 0.03 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.1 Lrequired
19.19.1.3Circular shape 450 mm internal diameter
MATERIAL
3.14/4x(0.775)²x0.15 = 0.0708 cum
3.14/4x(0.625)²x0.15 = (-) 0.0460 cum
= 0.0248 cum Say 0.03 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.2 Mrequired
D - 10 shape and approved quality
19.19.2.1Square shape 450 mm internal dimension
MATERIAL
7133 Rectangular shape 500x500 mm precast R.C.C. 670 each
0.95x0.95x0.15 = 0.1354 cum
0.80x0.80x0.15 = (-) 0.096 cum
= 0.0394 cum Say 0.04 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.2 Mrequired
MATERIAL
3.14/4x(0.95)²x0.15 = 0.1064 cum
3.14/4x(0.8)²x0.15 = (-) 0.0754 cum
= 0.031 cum Say 0.03 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.19.3 Hrequired
MATERIAL
3.14/4x(1.05)²x0.15 = 0.1299 cum
3.14/4x(0.9)²x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
required
19.19.4 EHD - 35 shape and approved quality
19.19.4.1Circular shape 560 mm internal dia
MATERIAL
3.14/4x(1.05)²x0.15 = 0.1299 cum
3.14/4x(0.9)²x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 no.
Say
19.2 19.2 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap
Code (standard pattern) the weight of cover to beRate
Description not less than 4.5 kg
Unit
MATERIAL
1353 C.I.cover without frame 300x300mm inside i.e. 477 each
9988 Carriage for cover 2.12 L.S.
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 cover
Say
19.21.1 19.21 Making connection of drain or sewer line with existing manhole including
breaking
19.21.1 For pipesinto
100 and making
to 250 good the walls, floors with cement concrete 1:2:4 mix
mm diameter
Details of cost for one connection
MATERIAL
coarse sand : 4 grade stone aggregate 20 mm nominal size)
= 0.30x0.30x0.23 m = 0.0207 cum
Less pipe = 1/2x3.14x0.23x0.23x0.23 = 0.0096 cum
= 0.0111 cum Say 0.01 cum
4.1.3 Rate as per item no. 4.1.3 of SH : Concrete 7365.15 cum
12 mm cement plater 1:3 ( 1 cement : 3 coarse sand ) finished with a f
2x0.35x0.35 =0.25sqm
LABOUR
(For cutting holes average size 30x30 cm in 23 cm thick wall and makin
114 Beldar 645 Day
9999 Add for delay sundries etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 connection
Say
breaking
250 and making
mm diameter
MATERIAL
Cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grade ston
= 0.35x0.35x0.30 m = 0.037 cum
= 0.016 cum Say 0.02 cum
2x0.40x0.40 =0.32 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
breaking
350 and making
mm diameter
MATERIAL
Cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grade ston
= 0.50x0.50x0.30 m = 0.075 cum
= 0.027 cum Say 0.03 cum
2x0.55x0.55 =0.605 sqm Say 0.60 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
19.22.1 19.22 Providing sand cast iron drop connection externally for 60 cm drop from branch
sewer
19.22.1 100 mm line
diatosand
maincast
sewer
ironmanhole including inspection and cleaning eye with
drop connection
Details of cost for one drop connection
MATERIAL
= 38+30+33 =101 cm say 1 metre

1 / 1.80 = 0.55556 Nos.
Length of pipe = 1m. Hence, Qty = 1 / 1.8
=0.55556
9977 Carriage of pipe 2.12 L.S.
Cutting charges
18.83.2 Rate as per item no 18.83.2 of SH: Water sup 160.7 each cu
1336 Clearing eye with chain and lid 100 mm dia 44 each
1628 S.C.I. plain single equal junctions100x100x1 405 each
Brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
0.20x0.20x0.23 = 0.009 cum
Less pipe 1/2x3.14x0.10x0.10x0.23 = 0.002 cum
Net Qty= 0.007 cum
Cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone agg
0.40x0.45x1.05 m = 0.189 cum
0.40x0.25x0.40 = 0.040 cum
Total= 0.229 cum
Less pipe portion
1/2x3.14x0.10x0.10x1.50 = 0.012 cum
Toothing portion
2x0.40x0.05x0.10 m = 0.004 cum
= 0.016 cum
Net Qty= 0.229-0.016 = 0.213 cum Say 0.21 cum
1x0.25x0.25 m = 0.0625 Say 0.06 sqm
Providing lead caulked joints to 100 mm diameter pipe and special
12.39.1 Rate as per item no. 12.39.1 of SH : Roofing 444 each
9999 Providing joint to S.W. pipe with cement morta 2.12 L.S.
Form work
1.30x1.05 m = 1.36 sqm
9988 Sundries including carriage of bends etc. 2.12 L.S.
LABOUR
For cutting holes 5 cm deep in alternate course of brick work benching
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one drop connection
Say
19.22.2 19.22 Providing sand cast iron drop connection externally for 60 cm drop from branch
sewer
19.22.2 150 mm line
diatosand
maincast
sewer
ironmanhole including inspection and cleaning eye with
drop connection
Details of cost for one drop connection
MATERIAL
= 34.5+30+37 =101.5cm say 1.00m

Length of pipe = 1m. Hence, Qty = 1 / 1.8
=0.55556
9977 Carriage of pipe 2.12 L.S.
Cutting charges
18.83.4 Rate as per item no 18.83.4 of SH Water Supp 301.9 each cu
1337 Clearing eye with chain and lid 150 mm dia 50 each
7087 S.C.I. Tee 150 mm 570 each
Brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
0.20x0.20x0.23 = 0.009 cum
Less pipe 1/2x3.14x0.15x0.15x0.23 = 0.004 cum
Net Qty= 0.005 cum
0.45x0.50x1.15 m = 0.259 cum
0.45x0.25x0.45 = 0.0510 cum
= 0.310 cum
Less pipe portion
1/4x3.14x0.15x0.15x1.50 = 0.027 cum
Toothing portion
3x0.45x0.05x0.10 m = 0.004 cum
= 0.031 cum
Net Qty 0.310-0.031 = 0.279 cum Say 0.28 cum
1x0.25x0.25 m = 0.0625 Say 0.06 sqm
Providing lead caulked joints to 150 mm diameter pipe and special
12.39.2 Rate as per item no. 12.39.2 of SH : Roofing 604.65 each
9999 Providing joint to S.W. pipe with cement morta 2.12 L.S.
Form work
1.450x1.15 m = 1.67 sqm
9988 Sundries including carriage of bends etc. 2.12 L.S.
LABOUR
For cutting holes 45 holes 5 cm deep toothing in alternate course of b
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
19.23.1 19.23 Extra for depths beyond 60 cm of sand cast iron drop connection complete:
19.23.1 For 100 mm dia sand cast iron drop connection
Details of cost for one metre
MATERIAL
Length of pipe = 1m. Hence, Qty = 1 / 1.8 = 0.55556
0.40x0.45x1.00 mm = 0.18 cum
Less pipe portion
1/2x3.14x0.10x0.10x1.00 = 0.008 cum
Toothing portion
5x0.40x0.05x0.10 m = 0.010 cum
Total= 0.018 cum
Net Qty= 0.18-0.018 = 0.162 cum Say 0.16 cum
Form work
1.30x1.00 m = 1.30 sqm
LABOUR
For cutting holes 5 cm deep in alternate course of brick work
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
19.23.2 19.23 Extra for depths beyond 60 cm of sand cast iron drop connection complete:
19.23.2 For 150 mm dia sand cast iron drop connection
MATERIAL
Length of pipe = 1m. Hence, Qty = 1 / 1.8 = 0.55556
0.45x0.50x1.00 mm = 0.225 cum
Less pipe portion
1/2x3.14x0.15x0.15x1.00 = 0.018 cum
Toothing portion
5x0.45x0.05x0.10 m = 0.011 cum
= 0.029 cum
Net 0.225-0.029 = 0.196 cum Say 0.20 cum
Form work
1.45x1.00 m = 1.45 sqm
LABOUR
For cutting 5 cm deep in alternate course of brick work
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
19.24.1 19.24 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,
including stacking
19.24.1 Rectangular manhole of useful
90x80 materials
cm and 45near the site and disposal of unserviceable
cm deep
Details of cost of a manhole 90x80 and 45 cm deep
Dismantling of cement concrete 1:4:8 (1 cement : 4 coarse sand 8 : a
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
15.2.2 Rate as per item no. 15.2.2 of SH : Dismantli 1239.55 cum
Dismantling of secon class brick work in cement mortar 1:4 (1 cement
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14x(0.15m)² x0.23m = (-) 0.008 cum
= 0.340 cum
15.7.4 Rate as per item no. 15.7.4 of SH :dismantlin 1698.45 cum
Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 gra
For benching 2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Net qty= 0.16 cum
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 grad
For slab : 1.36x1.26x0.15m = 0.257 cum
Net qty= 0.215 cum Say 0.22 cum
15.3 Rate as per item no 15.3 of SH : Demolishing 2928.1 cum
9999 Removal of C.I. Cover with frame 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
including stacking
19.24.2 Rectangular of useful
manhole 120x90materials
cm and 90near
cmthe site and disposal of unserviceable
deep
Details of cost of a manhole 120x90 and 90 cm deep
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
Dismantling of secon class brick work in cement mortar 1:4 (1 cement
5.12x0.23x0.80 m = 0.942 cum
Less for pipe 2x3.14x(0.15m)²x0.23 m = (-) 0.008 cum
Net qty = 0.934 cum Say 0.93 cum
2x1.20x0.90x(0.80/2) x (0.30+0.20)/2 = 2.70 cum
= 0.249 cum say 0.25
For slab : 1.66x1.36x0.15m = 0.339 cum
Less for cover 3.14/4x(0.50)²x0.15m = (-) 0.029 cum
Net qty = 0.31 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
including stacking
19.24.3 Rectangular of useful
arch type materials
manhole 140x90near the site
cm and 2.45and disposal of unserviceable
m deep
Details of cost of a manhole 140x90 and 2.45 m deep
2.16m x 1.66m x 0.20m = 0.72 cum
Dismantling of second class brick work in cement mortar 1:4 (1 cement
Brick work in item 5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx1.15m = 1.037 cum
= 2.561 cum
Deduct arch ring and portion of pipe
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
2x3.14/4(0.15)²x0.23m = 0.008 cum
= (-) 0.026 cum
Net qty = 2.561 - 0.026 = 2.535 cum Say 2.54 cum
Brick work in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
= 0.345 cum Say 0.35 cum
Net qty = 2.54+0.35 = 2.89 cum
2x1.4x0.90/2x(0.20+0.30)/2 = 0.315 cum
Less pipe 1.4x3.14/4x(0.15)² = (-) 0.025 cum
Net qty = 0.290 cum
1.36mx1.06mx0.15 = 0.216 cum
Less cover 3.14/4x(0.50)²x0.15m = (-) 0.029 cum
= 0.187 cum Say 0.19 cum
9999 Removal of M.S foot rest 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
includingmanhole
19.24.4 Circular stacking122
of useful materials
cm diameter andnear
1.68the site and disposal of unserviceable
m deep
Details of cost of a manhole 1.22 m internal diameter 1.68 m deep
Dismantling of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 a
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
15.2.1 Rate as per item no 15.2.1 of SH : Dismantlin 2007.1 cum
Dismantling of second class brick work in cement mortar 1:4 (1 cement
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
= 1.320
2x½x3.14x0.25mx0.23x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.23 = 0.008 cum
= 0.026 cum
Brick work in arches
Total = 1.294+0.02 = 1.1.314 cum Say 1.131 cum
Dismantaling cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gr
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³ =0.043 cum
= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-) = 0.0216 cum
= 0.2554 cum Say 0.26 cum
In cover fixing 0.7854x1.020x1.020x0.15 m =0.123 cum
= 0.086 cum Say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
15.2.1 Rate as per item no 15.2.1 of SH : Demolishin 2007.1 cum
9999 Removal of S.F.R.C cover with frame size 56 2.12 L.S.
9999 Removal of M.S. foot rests 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.25.1 19.25 Extra for depth of manholes dismantled :

19.25.1 Rectangular manhole 90x80 cm and beyond 45 cm depth
Dismantling of second class brick work in cement mortar 1:5 (1 Cement
4.32x0.23x1.0m = 0.994 cum Say 0.99 cum
9999 Removing of M.S. foot rests 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say

19.25.2 Rectangular manhole 120x90 cm and beyond 90 cm depth
Dismantling of second class brick work in cement mortar 1:5 (1 Cement
5.12x0.23x1.0m = 1.178 cum Say 1.18 cum
9999 Removing of M.S. foot rests 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for one metre
Say

19.25.3 Rectangular arch type manhole 140x90 cm and beyond 2.45 m depth (up to 4.25
Code m depth)
Details of cost of dismantling one manhole 4.25m deep
Dismantling IInd class brick work in cement mortar 1:4 (1 Cement : 4 C
Qty for 2.45m depth
5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx1.15m = 1.037 cum
Total = 2.561 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
2x3.14/4(0.15)²x0.23m = 0.008 cum
Total deduction= = (-) 0.026 cum
Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum
Qty in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
Totol for 4.45 m depth 2.54 + 0.35 = 2.89 cum
Qty for 4.25m depth
5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx2.95m = 2.660 cum
Total = 4.184 cum
2x½x3.14x0.70mx0.23x0.1m = 0.051 cum
2x3.14/4x(0.60)²x0.23 = 0.130 cum
Total deduction== (-) 0.181 cum
Net 4.184 - 0.181 = 4.003 cum Say 4.00 cum
Qty in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.70mx0.23x0.1m = 0.051 cum
Total for 2.25 m depth = 4.0+ 0.38 =4.38 cum
Net difference = 4.38 - 2.89 = 1.49 cum
Dismantling cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 gra
Qty for 4.25m depth
2x1.4x(0.90/2)x(0.65+0.75)/2 = 0.882 cum
Less pipe :1.4x3.14/4x(0.60)²(-) = 0.396 cum
= 0.486 cum Say 0.49 cum
Qty for 2.45m depth
2x1.4x(0.90/2)x(0.20+0.30)/2 = 0.315 cum
Less pipe :1.4x3.14/4x(0.15)²(-) = 0.025 cum
= 0.290 cum Say 0.29 cum
Net difference = 0.49 - 0.29 = 0.20 cum
15.2.1 Rate as per item no 15.2.1 of SH : Demolishin 2007.1 cum
Cost for 1.8 metre depth
Cost for 1 metre depth
Say

19.25.4 Circular manhole 122 cm diameter and beyond 1.68 m depth (up to 2.29 m depth)
Details o cost of dismantling one manhole 2.29m deep
Dismantling cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 gra
1.98x1.98x0.30 = 1.178 cum. Say 1.18 cum.
15.2.1 (Rate as per item No.15.2.1 of SH. dismantli 2007.1 cum
Dismantling IInd class brick work in cement mortar 1:4 (1 Cement : 4
Curved on plan
3.14x1.45x0.85x0.23 = 0.891
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
= 1.96
2x1/2x3.14x0.25mx0.23x0.10 m = 0.018 cum
2x3.14/4x(0.15)²x0.23 = 0.008 cum
Total deduction = 0.026 cum
Qty in arch
Total = 1.93 + 0.02 = 1.97 cum
Dismantling cemnet concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 gra
For benching :
3.14/4x(1.22)²x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)³ =0.043 cum
= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)²(-) = 0.0216 cum
Net qty== 0.2554 cum Say 0.26 cum
For fixing cover : 3.14/4 x d2 x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Total = 0.26 + 0.09 = 0.35 cum
9999 Removal of SFRC cover 2.12 L.S.
9999 Removal of M.S. foot rests 2.12 L.S.
Deduct cost of dismantling manhole 1.68m deep
19.24.4 Rate as per Item No.19.24.4 of SH:DRAINAG 5339 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of dismantling manhole 2.29m deep
Cost of manhole 0.61m depth
Cost per metre depth
Say
19.26.1 19.26 Raising manhole cover and frame slab to required level including dismantling
existing slabmanhole
19.26.1 Rectangular and making good
90x80 cmthe damage
with as required
rectangular (Raising
cover 600 x 450depth
mm ofofgrade LD
Code - 2.5
Details of cost for one manhole
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 agg
Less cover with frame portion
0.85x0.70x0.15 =(-) 0.089 cum
Net qty=0.168 cum Say 0.17 cum
15.3 Rate as per item no. 15.3 of SH : Dismantling 2928.1 cum
9999 Removal of R.C.C cover and frame 2.12 L.S.
Removal of R.C.C work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded st
For raised slab = 1.36x1.26x0.15 = 0.257 cum
Less portion cover with frame
= 0.85x0.70x0.15 =(-) 0.089 cum
Net qty== 0.168 cum Say 0.17 cum
5.3 Rate as per item no. 5.3 of SH : RCC work 10719.35 cum
Form work = 0.90x0.80 = 0.72 sqm
Less cover = 0.60x0.45 =(-) 0.27 sqm
Net qty = 0.045 sqm
5.9.3 Rate as per item no 5.9.3 of SH : RCC work 761.8 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
120x90 cmthe damage
with as cover
circular required
500(Raising
mm dia depth of MD - 10
of grade
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 aggr
1.66x1.36x0.15 = 0.339 cum
Less for R.C.C cover with frame
3.14/4x(0.80)²x0.15 =(-) 0.075 cum
Net qty 0.264 cum Say 0.26 cum
R.C.C work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggrega
1.66x1.36x0.15 = 0.339 cum
= 3.14/4x0.80x0.80x0.15 =(-) 0.075 cum
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)² =(-) 0.196 sqm
Net qty= 0.884 sqm Say .88 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
120x90 cmthe damage
with as cover
circular required
560(Raising
mm dia depth of HD - 20
of grade
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 aggr
1.66x1.36x0.15 = 0.339 cum
Less for R.C.C cover with frame
3.14/4x(0.90)²x0.15 =(-) 0.095 cum
Net qty 0.244 cum Say 0.24 cum
15.3 Rate as per item no 15.3 of SH : Dismantling 2928.1 cum
R.C.C work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggrega
1.66x1.36x0.15 = 0.339 cum
= 3.14/4x0.90x0.90x0.15 =(-) 0.095 cum
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)² =(-) 0.246 sqm
Net qty= 0.834 sqm Say .83 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
existing slab
19.26.4 Circular and making
manhole good
140 cm dia thecircular
with damagecover
as required
600 mm(Raising depthEHD
dia of grade of - 35
Dismantling of C.C slab of 1:2:4 (1 cement : 2 coarse sand : 4 aggreg
= 3.14/4x(0.985)²x0.15 = 0.114 cum
Less cover =3.14/4x(0.90)²x0.15 =(-) 0.095 cum
C.C work 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate
3.14/4x(0.985)²x0.15 = 0.114 cum
= 3.14/4x(0.90)²x0.15 =(-) 0.095 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no
Say
19.27.1 19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in
cement
19.27.1 With mortarburnt
common 1:4 (1clay
cement : 4(non
F.P.S. coarse sand) including
modular) 500x450
bricks of class mm pre-cast
designation 7.5
MATERIAL
1.11mx1.06mx0.15 m= 0.176 cum Say 0.18 cum
Brick work in bricks of clas designation 75 in cement mortar 1:4 ( 1 ce
2.82 m x 0.23m x0.45 m = 0.29 cum
12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with fl
Wall : 1.90x0.45 m = 0.855 sqm
Bed : 0.45x0.50 m = 0.225 sqm
Total= 1.080 sqm
2.82x0.23x0.15 m = 0.097 cum Say 0.10 cum
Form work
3.50x0.15 m = 0.525 sqm Say 0.53 sqm
7380 Precast R.C.C. grating with frame 500x450 mm 620 each
9977 Carriage of R.C.C. grating 2.12 L.S.
9999 Fixing R.C.C. grating 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.28.1 19.28 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in
cement
common 1:4 (1clay
cement : 4(non
F.P.S. coarse sand ) bricks
modular) with precast R.C.C.
of class vertical 7.5
designation grating
1.06mx1.06mx0.15 m= 0.17 cum Say 0.17 cum
2.72 m x 0.23m x0.70 m = 0.438 cum
Deduct opening 0.45x0.23x0.10 m = 0.01 cum
Block 3x(0.075)³ = 0.001 cum
Total deduction = 0.011 cum
Net qty. = 0.438 (-) 0.011 = 0.427 cum Say 0.43 cum
Wall : 1.80x0.70 m = 1.26 sqm
Bed : 0.45x0.45 m = 0.202 sqm
Top : 0.45x0.20 m = 0.09 sqm
Sides : 2x0.20x0.10 m = 0.04 sqm
Total= 1.592 sqm
Deduct opening
0.45x0.10 m = 0.045 sqm
Net qty. = 1.592 (-) 0.045 = 1.547 cum Say 1.55 cum
Block = 3x(0.75)³ = 0.001 cum
R.C.C. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
0.91x0.91x0.075 m = 0.062 cum Say 0.06 cum

floor five level
115 Coolie 645 Day
Form work
0.45x0.45 m = 0.202 sqm
0.45x0.20 m = 0.09 sqm
outside slab : 3.40x0.075 m = 0.255 sqm
Mild steel reinforcement for R.C.C work
0.062 cum @ 80 kg/cum = 4.96 kg
9999 Fixing and carriage of R.C.C. grating 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.29.1 19.29 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in
cement
common 1:4 (1clay
cement : 4(non
F.P.S. coarse sand) including
modular) 500x450
bricks of class mm precast
designation 7.5
1.71mx1.11mx0.15 m = 0.285 cum Say 0.29 cum
1.91 m x 0.23m x0.45 m = 0.199 cum
2.20mx0.23mx0.70 m = 0.354 cum
Total= 0.553 cum
Deduct lintel portion
2x0.23x0.20x0.20 m = (-) 0.018 cum
Nte Qty= 0.0535 cum Say 0.54 cum
Wall : 1.80x0.70 m = 1.26 sqm
Wall : 1.40x0.45 m = 0.63 sqm
Bed : 1.10x0.50 m = 0.55 sqm
Total= 2.44 sqm
Deduct 2x0.20x0.20 m = (-) 0.08 sqm
Net Qty= 2.36 sqm
Block = 1.92x0.23x0.15 = 0.07 cum
R.C.C. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
0.88x0.96x0.075 m = 0.063 cum Say 0.06 cum

floor five level
115 Coolie 645 Day
R.C.C. 1:2:4 (1 cement: 2 coarse sand : 4

graded stone aggregate 20 mm nominal
size) in lintels 1x0.96x0.20x0.20 m = 0.04
cum
Form work
Slab bottom 0.50x0.65 m = 0.325 sqm
Outer periphery 3.50x0.075 m = 0.263 sqm
2.20x0.15 m = 0.330 sqm
= 0.918 sqm Say 0.91 sqm
Mild steel reinforcement for R.C.C work
(0.06+0.04) = 0.10 cum @ 80 kg/cum = 8.00 kg
9977 Carriage of R.C.C. grating 2.12 L.S.
9999 Labour for fixing precast R.C.C. grating and f 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.30.1.1 19.3 Constructing brick masonry chamber for underground C.I. inspection chamber
and bends
19.30.1 Inside with bricks
dimensions in cement
455x610 mm andmortar
45 cm1:4deep
(1 cement : 4 coarse
for single sand)
pipe line : C.I. cover
19.30.1.1With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1.22mx1.065mx0.15 m= 0.195 cum Say .20 cum
3.05 m x 0.23m x0.30 m = 0.210 cum
Less pipe
2x3.14/4x(0.10)²x0.23 m = (-) 0.004 cum
Net Qty= 0.206 cum Say 0.21 cum
Wall : 2.13x0.30 m = 0.639 sqm
Bed : 0.61x0.455 m = 0.278 sqm
Total= 0.917 sqm
Less pipe 2x3.14/4x(0.10)² = (-) 0.016 sqm
Net Qty= 0.901 sqm Say 0.90 sqm
Cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded ston
3.05x0.23x0.15 = 0.105 cum
5.3 Rate as per Item No.5.3 of SH:Reinforced Ce 10719.35 cum
Form work
9977 Carriage of C.I.cover and frame 2.12 L.S.
9999 Painting of C.I. Cover and frame with coal tar 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
and bends
dimensions in cement
500x700 mm andmortar 1:4deep
45 cm (1 cement : 4line
for pipe coarse
withsand) C.I.
one or twocover
inletscommon
19.30.2.1With : burnt clay F.P.S. (non modular) bricks of class designation 7.5
1.31mx1.11mx0.15 m= 0.22 cum
Brick work in bricks of clas designation 75 in cement mortar 1:4 ( 1 cem
3.32 m x 0.23m x0.30 m = 0.229 cum
Less pipe
3x3.14x(0.10)²x0.23 m = (-) 0.005 cum
Wall : 2.40x0.30 m = 0.72 sqm
Bed : 0.70x0.50 m = 0.35 sqm
= 1.07 sqm
Less pipe 3x3.14/4x(0.10)² = (-) 0.02 sqm
Net Qty= 1.05 sqm
R.C.C 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20
1.16x0.96x0.15 = 0.167 cum
Deduct cover
0.61x0.45x0.15 m = (-) 0.042 cum
Less labour for not lifting the materilas upto floor five level
M.S.reinforcement for slab
0.13 cum @ 48.06 kg/cum = 6.25 kg
115 Coolie 645 Day
Form work
Inside area of chamber : 0.70x0.50 m = 0.35
sqm
= 0.95 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
= 0.672 sqm Say 0.67 sqm
9977 Carriage of C.I. Cover and frame 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
and bends
dimensions 600xin850
cement mortar
mm and 1:4 deep
45 cm (1 cement : 4 line
for pipe coarse
withsand)
threeC.I. cover
or more
inletscommon
19.30.3.1With : burnt clay F.P.S. (non modular) bricks of class designation 7.5
Details of cost of one chamber
1.46mx1.21mx0.15 m= 0.26 cum
3.82 m x 0.23m x0.30 m = 0.26 cum
Less pipe
5x3.14x(0.10)²x0.23 m = (-) 0.009 cum
Wall : 2.90x0.30 m = 0.87 sqm
Bed : 0.85x0.60 m = 0.51 sqm
Total= 1.38 sqm
Less pipe 5x3.14/4x(0.10)² = (-) 0.04 sqm
Net Qty= 1.34 sqm
R.C.C 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20
1.31x1.06x0.15 = 0.208 cum
Deduct cover
0.61x0.455x0.15 m = (-) 0.042 cum

floor five level
115 Coolie 645 Day
Form work
Inside area of chamber : 0.85x0.60 m = 0.511 sqm
Total= 1.185 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
Net Qty= 0.907 sqm Say 0.91 sqm
M.S.reinforcement for slab for 0.17 cum @ 48.06 kg/cum
= 48.06x0.17cum = 8.17 kg
9977 Carriage of C.I. Cover and frame 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one chamber
Say
19.31.1.1 19.31 Extra for depth beyond 45 cm of brick masonry chamber :

19.31.1 For 455x610 mm size
3.05 m x 0.23m x1.00 m = 0.70 cum
12 mm cement plaster 1:3 (1 cement : 3 coarse sand finished with float
Wall : 2.13x1.00 m = 2.13 sqm
TOTAL
Cost per metre
Say

19.31.2 For 500x700 mm size
Brick work in bricks of clas designation 75 in cement mortar 1:5 ( 1 cem
3.32 m x 0.23m x1.00 m = 0.76 cum
Wall : 2.40x1.00 m = 2.40 sqm
TOTAL
Cost per metre
Say

19.31.3 For 600x850 mm size
3.82 m x 0.23m x1.00 m = 0.88 cum
Wall : 2.90x1.00 m = 2.90 sqm
TOTAL
Cost per metre
Say
19.32.1 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey
combcommon
19.32.1 With shaft with bricks
burnt and
clay S.W.(non
F.P.S. drain pipe 100bricks
modular) mm diameter, 1.8 m long 7.5
of class designation
Details of cost for one soak pit
Earth work in excavation including disposal of surplus earth 3.14/4x(2
2.26.1 Rate as per item no. 2.26.1 of SH : Earth work 104.5 cum
= 3.14/4x(2.5)² x 1.5 m = 7.37 cum
2nd class bricks
perimetre = 4x0.35 =1.40 m
Area = 1.40x2.925 m = 4.1 sqm
Number of brick = 4.1x487x0.066 = 131.78
Wastage 10% = 13.718
Total= 144.96 Say 145 numbers
Brick bats = 3.14/4x(1.2)²x2.925m =3.33 cum
Deduct = 0.45x0.45x2.925 m = 0.59 cum
Net qty= 2.74 cum
362 Brick bats 450 cum
Brick aggregate 50 to 80 mm nominal size
= 3.14x1.50x0.03x2.925 m = 4.13 cum
Brick aggregate 40 mm nominal size
= 3.14x2.15x0.35x2.925 m =6.91 cum
Carriage of brick bats and aggregate
9999 Single matting 2.5x2.5 m = 6.25 sqm 2.12 L.S.
Precast R.C.C.slabs 7.5 cm thick in cement concrete 1:2:4 (1 cement
0.45x0.45x0.075 m = 0.02 cum
5.12 Rate as per item no 5.12 of SH : RCC 9654.95 cum
Reinforcement @ 80 kg/cum = 0.02x80 =1.6 kg
2nd class brick edging laid length wise with half brick depth
3.14x2.6 m =8.17 m
16.8.1 Rate as per item no. 16.8.1 of SH : Road work 49.9 metre
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one soak pit
Say
19.33 19.33 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain
Code pipe 100 mm diameter and 1.20 m long complete
Description Rate as per standard
Unit design.
Details of cost for one soak pit
Earth work in excavation including disposal of surplus earth 1.2x1.2x1
362 Brick bats 450 cum
1.2x1.2x1.2 = 1.73 cum
16.8.1 Rate as per item no. 16.8.1 of SH : Road work 49.9 metre
Second class brick edging laid length wise with half brick depth
LABOUR
For filling brick bats
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one soak pit
Say
19.34.1 19.34 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of
cement
19.34.1 100 mm mortar
dia 1:1 (1 cement : 1 fine sand) including testing of joints etc.
MATERIAL
7128 S.W. intercepting trap 100 mm dia 185 each
9977 Carriage of trap 2.12 L.S.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
19.34.2 19.34 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of
cement
19.34.2 150 mm mortar
dia 1:1 (1 cement : 1 fine sand) including testing of joints etc.
MATERIAL
7129 S.W. intercepting trap 150 mm dia 240 each
9977 Carriage of trap 2.12 L.S.
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one no.
Say
19.35.1 19.35 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes
including
19.35.1 450 mm diacollars/spigot
RCC pipes. jointed with stiff mixture of cement mortar in the
Detail for 10 meter
MATERIALS :
1728 RCC pipe 450 mm dia NP-3 spigot 1500 metre
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Detail of cost for 10 meter
Rate per meter.
Say
including
19.35.2 600 mm dia collars/spigot
Detail for 10 meter
MATERIALS :
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
Detail for 10 meter
MATERIALS :
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
RCC pipes.jointed
(Layingwith stiff mixture
by manual/ of cement
machanical mortar in the
means)
Detail for 10 meter
MATERIALS :
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
19.35.5 1200 collars/spigot
mm dia RCC pipes.jointed
means)
Detail for 10 meter
MATERIALS :
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
machenical mortar in the
means)
Detail for 10 meter
MATERIALS :
2336 Carriage of RCC pipe above 1200 mm dia an 11944.08 100 metre
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
19.36.1 19.36 Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes
including
Detail for 10 meter
MATERIALS :
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
Detail for 10 meter
MATERIALS :
1735 RCC pipe 600 mm dia pipe NP-4 spigot 2350 metre
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
Detail for 10 meter
MATERIALS :
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
means)
Detail for 10 meter
MATERIALS :
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
means)
Detail for 10 meter
MATERIALS :
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
including
RCC pipes.jointed
means)
Detail for 10 meter
MATERIALS :
2336 RCC pipe above 1200 mm dia and upto 1800 11944.08 100 metre
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Rate per meter.
Say
20.1.1 20.1 Providing, driving with hydraulic piling rigs with power units and installing driven
20.1.1 400cast-in-situ
mm dia reinforced
piles cement concrete piles of grade M-25 of specified diameter
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x0.40²x20 = 2.51 cum
5.33.1.1 Rate as per item no 5.33.1 of SH : RCC Work 8683.8 cum
7181 C.I. pile shoe of 80 kg per pile 48 kilogra
@ 80 kg per pile
7182 M.S. clamps for pile shoe of 35 kg per pile 43 kilogra
@ 35 kg per pile
MACHINERY
24 Hire and running charges of hydraulic piling ri 35000 day
25 Hire and running charges of light crane. 3500 day
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 20 metre pile
Say
mm dia reinforced
MATERIAL
Concrete -3.14/4x0.45²x20 = 3.18 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
mm dia reinforced
MATERIAL
Concrete 3.14/4x0.50²x20 = 3.925 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
mm dia reinforced
MATERIAL
Concrete 3.14/4x0.55²x20 = 4.75 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
mm dia reinforced
MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
cast-in-situ
20.1.6 1000 mm diareinforced
MATERIAL
Concrete 3.14/4x1.00²x10 = 7.85 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
cast-in-situ
MATERIAL
Concrete 3.14/4x1.2²x10 = 10.17 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
cast-in-situ
MATERIAL
Concrete 3.14/4x1.5²x9 = 15.90 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.2.1 20.2 Boring, providing and installation bored cast-in-situ reinforced cement concrete
pilesmm
20.2.1 450 of grade M-25 of specified diameter and length below the pile cap, to carry a
dia piles
MATERIAL
Concrete 3.14/4x0.45²x20 = 3.18 cum
MACHINERY
15 Hire and running charges of Tripod and Mech 3000 day
26 Hire and running charges of bentonite pump. 3000 day
18 Hire and running charges of loader 6000 Day
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.2.2 500pilesmm
of grade M-25 of specified diameter and length below the pile cap, to carry a
dia piles
MATERIAL
Concrete 3.14/4x0.50²x20 = 3.925cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.2.3 600pilesmm
of grade M-25 of specified diameter and length below the pile cap, to carry a
dia piles
MATERIAL
Concrete 3.14/4x0.60²x20 = 5.65 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
pilesmm
20.2.4 750 of grade M-25 of specified diameter and length below the pile cap, to carry a
dia piles
MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.3.1 20.2A Boring, providing and installation bored cast-in-situ reinforced cement concrete
pilesmm
20.2A.1 600 of garde M-25 of specified diameter and length below pile cap, to carry a
dia piles
MATERIAL
Concrete 3.14/4x0.60²x20 = 5.65 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
pilesmm
dia piles
MATERIAL
Concrete 3.14/4x0.75²x15 = 6.62 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
piles mm
dia piles
MATERIAL
Concrete 3.14/4x1.00²x10 = 7.85 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.2A.4 piles mm
1200 of garde M-25 of specified diameter and length below pile cap, to carry a
dia piles
MATERIAL
Concrete 3.14/4x1.20²x9 = 10.17 cum
MACHINERY
18 Hire and running charges of loader. 6000 Day
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
piles mm
dia piles
MATERIAL
Concrete 3.14/4x1.50²x9 = 15.90 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.4.1 20.3 Boring with hydraulic piling rigs with power units, providing and installing cast in
situ mm
20.3.1 300 single
diaunder
piles reamed piles of specified diameter and length below pile cap in
MATERIAL
R.C.C
Stem -3.14/4x(0.30)²x9.625 = 0.680 cum
Bulb -3.14/4x(0.75)²x0.075 = 0.033 cum
2x 3.14/4x(0.525)²x0.150 = 0.065 cum

=0.778 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
situ mm
20.3.2 400 single
diaunder
MATERIAL
R.C.C
Stem -3.14/4x(0.40)²x9.30 = 1.169 cum
Bulb -3.14/4x(1.00)²x0.1 = 0.079 cum
2x 3.14/4x(0.7)²x0.30 = 0.23 cum

= 1.478 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
situ mm
20.3.3 450 single
diaunder
MATERIAL
R.C.C
Stem -3.14/4x(0.45)²x9.212 = 1.465 cum
Bulb -3.14/4x(1.125)²x0.113 = 0.112 cum
2x 3.14/4x(0.788)²x0.337 = 0.329 cum

= 1.906 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
situ mm
20.3.4 550 single
diaunder
MATERIAL
R.C.C
Stem -3.14/4x(0.50)²x9.125 = 1.792 cum
Bulb -3.14/4x(1.25)²x0.125 = 0.153 cum
2x 3.14/4x(0.875)²x0.375 = 0.451 cum

= 2.396 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.5.1 20.4 Extra over single under ream for providing additional bulbs in under reamed
20.4.1 300piles,
mm under specified diameter(only the nos. of extra bulbs are to be paid)
dia piles
Details of cost for 1 bulb.
MATERIAL
Bulb - 0.033 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 1 bulb
Say
20.4.2 400piles,
dia piles
MATERIAL
Bulb - 0.063 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 1 bulb
Say
20.4.3 450piles,
dia piles
MATERIAL
Bulb - 0.081 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 1 bulb
Say
piles,
20.4.4 550 mm under specified diameter(only the nos. of extra bulbs are to be paid)
dia piles
MATERIAL
Bulb - 0.102 cum
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
Total
TOTAL
TOTAL
TOTAL
Cost for 1 bulb
Say
20.6.1 20.5 Providing, driving (with vibrating pile driving hammer complete with power units
20.5.1 400& accessories)
mm dia piles and installing driven Pre-cast reinforced cement concrete piles of
MATERIAL
Concrete -3.14/4x(0.40)²x20 = 2.51 cum
Add
5.19 Rate as per item no 5.19 of SH : RCC 14136.55 cum
5.1.3 Deduct Rate as per item no 5.1.3 SH : RCC 7945.65 cum
Cement mortar 1:2 for grout

@ 80 kg per pile
@35 kg per pile
MACHINERY
27 Hire and running charges of vibrating pile dr 30000 day
28 Hire and running charges of crane 20 tonne ca 7000 day
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
MATERIAL
Concrete -3.14/4x(0.45)²x20 = 3.18 cum
5.19 Add Rate as per item no 5.19 SH : RCC 14136.55 cum

9999 Wooden block @ 1 block per two piles 2.12 L.S.
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
MATERIAL
Concrete -3.14/4x(0.50)²x20 = 3.925 cum

@ 80 kg per pile
7182 M.S. clamps for pile shoe 43 kilogra
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.5.4 550 & accessories)
MATERIAL
Concrete -3.14/4x(0.55)²x20 = 4.75 cum
@ 80 kg per pile
7182 M.S. clamps for pile shoe 43 kilogra
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
MATERIAL
Concrete -3.14/4x(0.75)²x20 = 10.88 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
& accessories)
20.5.6 1000 mm dia pilesand installing driven Pre-cast reinforced cement concrete piles of
MATERIAL
Concrete -3.14/4x(1.00)²x20 = 15.70 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
130 Mistry 784 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Say
20.7.1.1 20.6 Vertical load testing of piles in accordance with IS 2911 (Part IV) including
installation
20.6.1 Single of loading
pile upto 50 tonneplatform by Kentledge/Anchor piles method and
Safe capacity
20.6.1.1 Initial test (Test Load 2.5 times the Safe capacity)
Details of cost for 1 test
7246 Verticle load testing (INITIAL) of piles in acco 38500 per test
of pile head or construction of test cap and dismantling of test cap afte
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
installation
pile upto 50 tonneplatform by Kentledge/Anchor piles method and
Safe capacity
20.6.1.2 Routine test (Test Load 1.5 times the Safe capacity)
7249 Cyclic verticle load testing of piles in accorda 13800 per test
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
installation
pile above platform
50 tonne and by Kentledge/Anchor
upto piles method and
100 tonne Safe capacity
7247 Verticle load testing (INITIAL) of piles in acc 43000 per test
and preparation of pile head or construction of test cap and dismantling
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
installation
pile above platform
50 tonne and by
uptoKentledge/Anchor piles method and
100 tonne Safe capacity
7250 Cyclic verticle load testing of piles in accord 22800 per test
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
installation
20.6.3 Group ofor
of two loading platform
more piles uptoby
50Kentledge/Anchor piles method and
tonne Safe capacity
7248 Verticle load testing (INITIAL) of piles in acc 49500 per test
and preparation of pile head or construction of test cap and dismantling
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
installation
20.6.3 Group ofor
of two loading platform
more piles uptoby
50Kentledge/Anchor piles method and
tonne Safe capacity
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
20.8.1.1 20.7 Cyclic vertical load testing of pile in accordance with IS Code of practice IS:2911
(part IV)
20.7.1 Single by Kentledge method including preparation of pile head etc for.
pile
20.7.1.1 Upto 50 tonne Safe capacity pile
7249 Cyclic verticle load testing of piles in accorda 13800 per test
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
(part IV)
20.7.1 Single by Kentledge method including preparation of pile head etc for.
pile
20.7.1.2 Above 50 tonne and upto 100 tonne Safe capacity pile
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
(part IV)
20.7.2 Group ofby Kentledge
two method including preparation of pile head etc for.
or more piles
20.7.2.1 Upto 400 tonne Safe capacity of group
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
20.9.1 20.8 Lateral load testing of single pile in accordance with IS Code of practice IS : 2911
(Part 50
20.8.1 Upto IV) tonne
for determining safe allowable lateral load on pile :
capacity pile
7252 Lateral load testing of single pile in accordanc 13800 per test
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
20.9.2 20.8 Lateral load testing of single pile in accordance with IS Code of practice IS : 2911
(Part IV)
20.8.2 Above 50for determining
tonne and uptosafe
100 allowable lateralpile
tonne capacity load on pile :
7253 Lateral load testing of single pile in accordan 23100 per test
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
20.1 20.9 Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test
Code method in accordance with IS 14893 including
Description Ratesurface preparation
Unit of pile top by
Detail of cost for one pit test (Ten pits in one day)
MATERIAL
81 Pile Integrity testing equipment 3000 Day
LABOUR
160 Technician 853 Day
161 Helper (Technician) 645 Day
Miscllaneous
9999 Reporting charges 2.12 L.S.
9977 Transportation and consumables etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost per test
Say
21.1.1.1 21.1 Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
21.1.1 For fixed portion
21.1.1.1Anodised aluminium (anodised transparent or dyed to required shade according
Code to IS: 1868, Minimum anodic coating of grade
Description AC 15)
Rate Unit
Details of cost for 40.02 kg
MATERIAL
(i) External member of the frame (Jindal section no 4605)
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal section no 4604)
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side (Jindal section no 4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg
(v) C.P. brass /stainless steel screws 20 mm

for cleat angle 18x4 = 72 Nos
(vi)
7389 Anodising 15 microns on aluminium sections 38 kilogra
(vii)
LABOUR
For fabrication of frame
114 Beldar 645 Day
9999 Labour for drilling holes, hire charges of drill, 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
21.1.1 Forpartitions with extruded built up standard tubular sections/ appropriate Z
fixed portion
21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)
MATERIAL
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
2x6x2 (1.14+0.95) = 50.16 m
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg

(vi) Epoxy
7392 Powder coating 50 microns on aluminium sect 61 kilogra
(vii)
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
21.1.1 Forpartitions with extruded built up standard tubular sections/ appropriate Z
fixed portion
21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder
Code coating 50 micron)
MATERIAL
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
2x6x2 (1.14+0.95) = 50.16 m
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg

(vi)
7393 Polyester powder coating 50 microns on alum 67 kilogra
(vii)
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
21.1.2 Forpartitions with
shutters of extruded built up&standard
doors, windows tubular
ventilators sections/
including appropriate
providing Z
and fixing
hinges/ pivots
21.1.2.1 Anodised and making
aluminium provision
(anodised for fixing
transparent or of fittings
dyed wherever
to required required
shade according
Code to IS: 1868, Minimum anodic coating of grade
Description AC 15)
Rate Unit
MATERIAL
(i) Hanging style (Jindal section no 4524)
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
(ii) Meeting style (Jindal section no 4526)
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no 4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524)
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
(v) Glazing plate (Jindal section no 440) on one side of lock rail
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal section no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
Total = 21.65 kg
(viii)
(ix) C.P. brass /stainless steel screws 20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre in 75 cm length 2x6 = 12
Total = 92 Nos
(x)
(xi)
(xii) Neoprene/ EPDM gasket in groove of

meeting style
7390 Neoprene/EPDM rubber gasket 15 metre
LABOUR
For fabrication
114 Beldar 645 Day
For fixing the shutter including hinges :
114 Beldar 645 Day
9999 Labour for making provision for fittings and c 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
21.1.2 partitions
For shutterswith
of extruded built up&standard
providing Z
and fixing
hinges/ pivots
21.1.2.2 Powder coatedand making (minimum
aluminium provision for fixing ofoffittings
thickness powderwherever required
coating 50 micron)
MATERIAL
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Total = 21.65 kg
(viii)
For cleat 12x4 = 48
For cleat 4x8 = 32
Total = 92 Nos
(x) Epoxy
(xi)
(xii) Neoprene/ EPDM rubber gasket in groove of meeting style
LABOUR
114 Beldar 645 Day
114 Beldar 645 Day
9999 Labour for making provision for fittings and c 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
21.1.2 Forpartitions with
shutters of extruded built up&standard
providing Z
and fixing
hinges/ pivots and making provision for fixing of fittings wherever
21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder required
MATERIAL
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Total = 21.65 kg
(viii)
For cleat 12x4 = 48
For cleat 4x8 = 32
Total = 92 Nos
(x)
(xi)
(xii) Neoprene/ EPDM rubber gasket in groove of meeting style
LABOUR
For fabrication
114 Beldar 645 Day
114 Beldar 645 Day
9999 Labour for making provision for fittings and ca 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
21.2.1 21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three
21.2.1 layer or gradedparticle
Pre-laminated wood particle board
board with conforming
decorative to IS: 12823
lamination Grade
on one sidel and
Type ll, in
Code balancing lamination on other side
MATERIAL
12 mm thick particle board = 7.00 sqm
Total = 7.35 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7 sqm
Cost for 1 sqm
Say
21.2.2 21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three
layer or gradedparticle
21.2.2 Pre-laminated wood particle board
board with conforming
decorative to IS: 12823
lamination Grade
on both l Type ll, in
sides
MATERIAL
12 mm thick particle board = 7.00 sqm
Total = 7.35 sqm
7480 Prelaminated particle board with both sides de 490 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7 sqm
Cost for 1 sqm
Say
21.3.1 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions
21.3.1 With etc. with
float glass EPDM
panes rubber
of 4.0 mm /thickness
neoprene(weight
gasket not
etc. less
complete as per the
than 10kg/sqm)
MATERIAL
Float Glass panes 4.0 mm thick = 1.00 sqm
Add for wastage & breakage @ 10% = 0.10 sqm
Total =1.10 sqm
LABOUR
114 Beldar 645 Day
9988 Sundries and carriage of gasket 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
partitions
float glass EPDM
panes of 5rubber / neoprene
mm thickness gasket
(weight etc.
not complete
less as per
than 12.50 the
kg/sqm)
MATERIAL
Glass panes 5.50 mm thick = 1.00 sqm
Total =1.00 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
partitions
float glass EPDM
panes of 8rubber / neoprene
mm thickness gasket
(weight etc.
not complete
less than 20as per the
kg/sqm)
MATERIAL
Float Glass panes 8.0 mm thick = 1.00 sqm
Total =1.10 sqm
2408 Float glass sheet of nominal thickness 8 mm.( 628 sqm
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
21.4.1 21.4 Providing and fixing double action hydraulic floor spring of approved brand and
manufacture
21.4.1 With stainlessconforming
steel coverto IS : 6315,
plate having
minimum 1.25brand logo embossed on the body /
mm thickness
Details of cost for one number
MATERIAL
7394 Double action hydraulic floor spring with stain 1500 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each
Say
21.4.2 21.4 Providing and fixing double action hydraulic floor spring of approved brand and
manufacture
21.4.2 With conforming
brass cover to IS : 6315,
plate minimum 1.25 having brand logo embossed on the body /
mm thickness
Details of cost for one number
MATERIAL
7396 Double action hydraulic floor spring with brass 1620 each
LABOUR
For cutting hole and making it good
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each
Say
21.5 21.5 Providing and fixing powder coated aluminium work (minimum thickness of
Code powder coating 50 micron) consisting of tee/
Description angle sections,
Rate of approved make
Unit
Details of cost for 6.35 kg (2.40x2.40 = 5.76 sqm)
MATERIAL
(i) Aluminium main runner - assuming Tee of size 35x23.5x1.5 mm @
3x2.40 m = 7.20 m
Extra for light fittings
2x1.20 m = 2.40 m
Total= 9.60 m @ 0.247 kg/m = 2.370 kg
Aluminium cross runner - assuming Tee of size 35x23.5x1.5 mm @ 600
3x4x0.60 m = 7.20 m
(-) 2x0.30 = (-) 0.60 m
Total=6.60 m @ 0.247 kg/m = 1.630 kg
Perimeter angle aluminium - assuming size 25.4x25.4x1.63 mm @ 600
4x2.40 m = 9.60 m @ 0.213 kg/m = 2.045 kg
(ii) CLEATS
Aluminium angle- assuming size 25.4x25.4x1.63 mm
Extra for light fittings =3x2x2 = 12.00
Corner = 4.00
For joining runners = 42.00
Total = 58.00x0.025 = 1.45 m @ 0.213 kg/m = 0.309 kg
Sub total = 2.370 + 1.630 + 2.045 + 0.309 =6.354 kg
(iii) C.P. brass/ stainless steel screws 20 mm for angle cleats
(iv) Rawl plug for fixing perimeter angles
Epoxy
(vi)
(vii)
9999 C.P. brass screws for fixing frame with suspe 2.12 L.S.
LABOUR
For fabrication and erection
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 6.35 kg
Cost for 1 kg
Say
21.6 21.6 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length)
Code fixed to roof slabs by means of ceiling cleats
Description Ratemade out of G.I.
Unitflat 40x3mm size
Details of cost for 23 nos (hangers in 2.40 mx 2.40 m = 5.76 sqm)one
MATERIAL
6 mm dia G.I. adjustable hangers including clips (upto 1.20 metre lengt
For light fitting 2x4 = 8.00
For runners = 15.00
total = 23.00
7395 6 mm dia. G.I. adjustable hangers including cl 20 each
Ceiling cleats
G.I. flat 40X3 mm 60mm long
23x0.06 = 1.38 m @ 0.95kg/m = 1.31kg
Total = 1.38 kg say 0.014 q
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 23 hangers
Cost for one hanger
Say
21.7.1 21.7 Providing and fixing machine moulded aluminium covering of approved pattern
21.7.1 & design, made
Anodised out ofsheet
aluminium machine cutthick
2.5mm aluminium sheet
(anodised and machine
transparent holedtofor
or dyed
Code required shade according to IS: 1868, Minimum
Description Rate anodic coating
Unit of grade AC 15)
MATERIAL
Anodised aluminium sheet 2.5 mm thick, 170 mm wide
5.88 m x0.17 m = 1.00 sqm @ 7.00 kg/sqm = 7.00 kg
Total = 7.35 kg
7347 Cadmium plated full threaded steel screws (3 27 100 Nos
7348 Aluminium washer 2 mm thick 15 mm dia 10 100 Nos
LABOUR
114 Beldar 645 Day
9999 Sundries including machine work 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7.00 kg
Cost for 1 kg
Say
21.7.2 21.7 Providing and fixing machine moulded aluminium covering of approved pattern
& design,
21.7.2 Powder madealuminium
coated out of machine
sheetcut aluminium
2.5mm sheet andthickness
thick (minimum machine holed for
of powder
MATERIAL
Anodised aluminium sheet 2.5 mm thick, 170 mm wide
5.88 m x0.17 m = 1.00 sqm @ 7.00 kg/sqm = 7.00 kg
Total = 7.35 kg
7347 Cadmium plated full threaded steel screws (3 27 100 Nos
7348 Aluminium washer 2 mm thick 15 mm dia 10 100 Nos
LABOUR
114 Beldar 645 Day
9999 Sundries including machine work 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 7.00 kg
Cost for 1 kg
Say
21.8.1 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work
by providing
21.8.1 Upto 5mm depthweather
and 5silicon sealant over backer rod of approved quality as per
mm width
MATERIAL
8646 Silicon sealant 112 cartrid
(i/c 5% wastage)
8654 Masking tape 2.18 metre
9999 Sundries & profile 2.12 L.S.
9999 LABOUR 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 metre
Cost for 1 metre
Say
21.9.1 21.9 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium
21.9.1 Forextruded sections.
fixed portion
Total
TOTAL
TOTAL
TOTAL
Cost for 41.09 kg
Cost for 1 kg
Say
21.9.2 21.9 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium
21.9.2 Forextruded sections.
shutters of doors, windows & ventilators
Total
TOTAL
TOTAL
TOTAL
Cost for 21.65kg
Cost for 1 kg
Say
21.1 21.1 Providing and fixing double glazed hermetically sealed glazing in aluminium
Code windows, ventilators and partition etc. withRate
Description 6 mm thick clearUnit
float glass both
MATERIAL
Hermetically sealled double glazed unit made with 6mm thick clear flo
Total = 1.10 sqm
8648 Hermetically sealed double glazed unit made w 2200 sqm
LABOUR
Glazier /
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1 sqm
Say
21.11.1 21.11 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows
stays
21.11.1 205 X of
19 approved
mm quality with necessary stainless steel screws etc. to the side
Details of cost sor 10 nos.
MATERIAL
8649 Stainless steel (SS 304 grade) adjustable fri 197.8 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
stays
21.11.2 255 X of
19 approved
MATERIAL
8650 Stainless steel (SS 304 grade) adjustable fric 225 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
stays
21.11.3 355 X of
19 approved
MATERIAL
8651 Stainless steel (SS 304 grade) adjustable fri 195 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
stays
21.11.4 510 X of
19 approved
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
stays
21.11.5 710 X of
19 approved
MATERIAL
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
21.12.1 21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick
& 2100 mm
21.12.1 Anodized long
(AC 15with SS screws
) aluminium etc .complete
tubular as per direction of Engineer-in-
handle bar
Details of cost for 10 nos handle bar.
MATERIAL
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057 cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Add 5% wastage 0.78 kg
Total = 16.34 kg
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
& 2100 mm
21.12.2 Powder longminimum
coated with SS screws etc 50
thickness .complete as per direction
micron aluminium of handle
tubular Engineer-in-
bar
MATERIAL
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057 cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Total = 16.34 kg
Epoxy
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
& 2100 mm
21.12.3 Polyester long with
powder SS screws
coated minimum etcthickness
.complete50
asmicron
per direction of Engineer-in-
aluminium tubular
Code handle bar
MATERIAL
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057 cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Total = 16.34 kg
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
21.13 21.13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without
Code pair of handles (best make of approved quality)
Description Rate for aluminium
Unitdoors including
Detail of cost for 1 nos.
MATERIAL
7001 Brass 100mm mortice latch and lock with6 leve 195 each
LABOUR
9999 Sundry and screws 2.12 L.S.
Total
TOTAL
TOTAL
TOTAL
Cost of 1 no
Say
21.14 21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to
Code required shade according to IS: 1868. Minimum
Description Rate anodic coating
Unit of grade AC 15)
Details of cost for 4.082kg
MATERIAL
Aluminium Section
(i) External member of the frame (Jindal section no TU/ 3644)
V = 2x2.00 = 4.00 m
H = 2x1.20 = 2.40 m
Total= 6.40 m @ 0.607 kg/m = 3.885kg
Angle cleat 38x38x4.8 mm 50 mm long
4x0.05 = 0.200 m @ 0.985 kg/m = 0.197 kg
sub total = 4.082kg.
Add 5% wastage = 0.204kg
Total = 4.286kg
LABOUR
114 Beldar 645 Day
9999 Labour for drilling holes, hire charges of drill 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 4.082 kg
Cost for 1 kg
Say
21.15.1 21.15 Providing and fixing aluminium casement windows fastener of required length
for aluminium
21.15.1 Anodized windows
(AC 15) with necessary screws etc. complete.
aluminium
MATERIAL
8660 Aluminium casement window fastener (Anodi 48 each
8666 Stainless steel screws 25 mm x4 mm 41.8 100 Nos
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
for aluminium
21.15.2 Powder coatedwindows
minimumwith necessary
thickness screwsaluminium
50 micron etc. complete.
MATERIAL
8661 Aluminium casement window fastener (powder 52.64 each
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
for aluminium
21.15.3 Polyester windows
powder coatedwith necessary
minimum screws50etc.
thickness complete.
micron aluminium
MATERIAL
8662 Aluminium casement window fastener (polyes 51.52 each
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
21.16.1 21.16 Providing and fixing aluminium round shape handle of outer dia 100 mm with SS
screws etc.
21.16.1 Anodized complete
(AC as per direction of Engineer-in-charge
15 ) aluminium
MATERIAL
8663 Aluminium round shape handle (anodised AC 59.36 each
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
screws etc.
21.16.2 Powder complete
coated as per
minimum direction
thickness 50of Engineer-in-charge
micron aluminium
8664 Aluminium round shape handle (powder coate 60 each
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
screws etc.
21.16.3 Polyester complete
powder as per
coated direction
minimum of Engineer-in-charge
thickness 50 micron aluminium
MATERIAL
8665 Aluminium round shape handle (polyester pow 62 each
LABOUR
Total
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 nos
Say
21.17 21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to
Code required shade according to IS: 1868 with minimum
Description Rate anodic Unit
coating of grade AC
MATERIAL
Anodised aluminium grill = 10.00 kg
Add 20% wastage = 2 kg = 12 kg
8774 Aluminium Grill 279 kg
LABOUR
for fixing
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00 kg
Cost for 1 kg
Say
21.18 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of
Code approved brand and manufacture, including
Description providing and fixing
Rate Unit top & bottom
MATERIAL
Glass= 2.10 Sqm.
Add Wastage @ 10% = 0.21 sqm.
Total= 2.31 sqm.
8778 Toughened glass 12 mm thickness 1750 sqm
9977 Carriage of glass panes and other materials 2.12 L.S.
Stainless steel pivot and spring type fixing
21.4.1 Rate as per Item No.21.4.1 of SH:Aluminium 2448.85 each
LABOUR
119 Glazier 714 Day
114 Beldar 645 Day
9999 Sundries,sush rog cotton etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.10 sqm
Cost for 1 sqm
Say
21.19.1 21.19 Filling the gap in between aluminium/ stone/ wood frame and adjacent
RCC/Brick/
21.19.1 Upto Stone/and
5 mm depth wood/ Ceramic/
5 mm width Gypsum work by providing weather/structural

width 5mm & depth 5mm
MATERIAL
2604 Weather/structural non sag elastomeric PU se 543 each
9999 Sundries, including charges of Sealant gun ma 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say
RCC/Brick/
21.19.2 Upto 10 mmStone/
depth wood/
and 10Ceramic/
mm widthGypsum work by providing weather/structural

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say
RCC/Brick/
21.19.3 Upto 20 mmStone/
depth wood/
and 20Ceramic/
mm widthGypsum work by providing weather/structural

MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say
22.1.1 22.1 Providing and laying integral cement based treatment for water proofing on
horizontal
22.1.1 Using surface
rough at all depth below ground level for under ground structures as
kota stone.
MATERIAL
Ist layer
Cement mortar 1:3 for fixing of stone 10x0.025 = 0.25 cum
Kota stone slab = 10 sqm
Wastage @ 10% = 1 sqm
Total = 11 sqm
Cartage 11x0.025 @ 2330 kg/m3 = 0.64 t
Cement mortar 1:3
10x0.025 = 0.25 cum
Wastage @ 12% = 0.03 cum
Total = 0.28 cum
for slurry Bed
2x10.00 @ 2kg/m3 = 40.00 kg
Joints
4x3.7x0.02x0.037 = 0.011 cum
25x0.6x0.02x0.037 = 0.011 cum
= 0.022 cum @ 1440 kg/cum =31.68 kg
Total = 71.88 kg or 0. 72 t
Mortar = 0.25 + 0.28 = 0.53 cum
Cement in 0.53 cum @ 5.1 q/cum = 2.7 quintal
Cement in slurry = 0.73 quintal
Total = 3.43 quintal @ 1 kg for 50 kg of cement i.e. 6.86 kg
@ 8 cudm/sqm 1x10.3x8x1/1000 = 0.08 cum
Labour for base mortar & kota stone laying i.e. slurry job
Labour for base mortar & kota stone laying i/c slurry job
114 Beldar 645 Day
115 Coolie 645 Day
LABOUR
Labour for top layer & spreading stone grit
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00 sqm
Cost for 1 sqm
Say
22.2.1 22.2 Providing and laying integral cement based treatment for water proofing on the
verticalrough
22.2.1 Using surface
Kotabystone
fixing specified stone slab 22 mm to 25 mm thick with cement
MATERIAL
Ist layer
Kota stone slab = 10 sqm
Wastage @ 10% = 1 sqm
Total = 11 sqm
Cartage 11x0.025 @ 2330 kg/m3 = 0.64t
Cement slurry for jointing
6x3.70 = 22.20 m
7x2.78 = 19.46 m
=41.66x0.025x0.012 = 0.013 cum
Cement slurry for filling 20 mm gap
10x0.02 = 0.200 cum
= 0.213 cum @ 1440 kg/cum = 306.70 kg or
0.307 t
Cement plaster 1:3 with neat cement punning
Water proofing material
Cement slurry = 0.31 t = 310 kg
Cement plaster 1:3 @ 13.62 q/100sqm = 136.20 kg
Total = 446.20 kg @ 1 kg for 50 kg of cement i.e. 8.90 kg
LABOUR
Fixing of Kota stone and applying cement slurry.
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00sqm
Cost for 1 sqm
Say
22.3 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces
Code of depressed portions of W.C., kitchen andRate
Description the like consisting
Unitof: (i) Ist course of
MATERIAL
Cement slurry @ 4.4 kg/sqm = 44.00 kg or 0.044 t
MATERIAL
Cement plaster 1:3 (20 mm thick)
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
9999 Scafolding and sundries 2.12 L.S.
= 10x1.70= 17 kg = 0.017 t
3002 Polyvinyle chloride sheet 400 micron thick 45 sqm
@ 1 kg per 50 kg of cement used

Cement slurry = 44 kg
Cement plaster 1:3
10x(13.62xl00)/100= 136.2 kg Total = 180.2
kg/50 = 3.60 kg
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
22.4.1 22.4 Providing and Placing in position suitable PVC water stops conforming to
IS:12200 with
22.4.1 Serrated for construction/ expansion
central bulb (225 joints
mm wide, between
8-11 two RCC members and fixed
mm thick)
MATERIAL
7427 Water stops Serrated with central bulb (225 200 metre
LABOUR
114 Beldar 645 Day
9999 Sundries & wire etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
IS:12200
22.4.2 Dumb bellfor construction/
with central bulbexpansion joints8between
(180 mm wide, two RCC members and fixed
mm thick)
MATERIAL
7428 Water stops Dumb bell with central bulb 160 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
IS:12200(320
22.4.3 Kickers for construction/
mm wide, 5 mm expansion
thick) joints between two RCC members and fixed
MATERIAL
7429 Kickers 160 metre
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
22.5 22.5 Providing and laying water proofing treatment in sunken portion of WCs,
Code bathroom etc., by applying cement slurry mixed
Description Rate with water Unit
proofing cement
Cement 10x(0.488+0.242) = 7.30 kg
Sealing fillets 10x0.5 kg / sqm = 5.00 kg
Total = 12.30 kg = 0.012 tonne
Bonding material 1.6 kgx30x2 = 96 kg Bitumen (blown/residual type)
10x(0.25+0.126) = 3.79 kg
Sealing fillets 10x0.10 kg / sqm = 1.00 kg
Wastage @ 5% on 4.79 kg = 0.24 kg
8501 Polymer modified cementation coating 160 kilogra
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
22.6 22.6 Providing and laying water proofing treatment on roofs of slabs by applying
Code cement slurry mixed with water proofing cement
Description Rate compoundUnit consisting of
MATERIAL
Cement 10x(1.289+0.488) = 17.77 kg
Sealing fillets @ 10% = 1.77 kg
Total = 19.54kg = 0.020 tonne
Bonding material 1.6 kgx30x2 = 96 kg Bitumen (blown/residual type)
10x(0.253+0.67) = 9.23 kg
Wastage @ 5% = 0.46 kg
Total = 9.69 kg
8501 Polymer modified cementation coating 160 kilogra
Fibre Glass cloth = 10.00 sqm
Wastage @ 10 % - 1.00 sqm
Total = 11.00 sqm
8502 Fibre glass cloth 32 sqm
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
22.7.1 22.7 Providing and laying integral cement based water proofing treatment including
preparation
22.7.1 With averageofthickness
surface as ofrequired
120 mm for
andtreatment
minimumof roofs, balconies,
thickness at khurraterraces etc
as 65 mm.
i) Cement slury
ii) Cement mortar 1:5 (1 cement: 5 coarsesand)
3.1 Rate as per Item No.3.10 of SH:Mortars 3995 cum
iii) Roof treatment with brick bat and cement mortar
MATERIAL
Cement mortar 1:5
3.1 Rate as per Item No.3.10 of SH:Mortars 3995 cum
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
128 Mate 714 Day
Extra labour for ramming
114 Beldar 645 Day
iv) Cement slury
114 Beldar 645 Day
v) 20 mm cement plaster 1:4 (1 cement : 4 coarse sand)
vi) Water proofing compound
vi) Water proofing compound

27.50+27.50+69.40+124.00 = 248.40 kg @
1 kg per bag of cement
Extra for making chequers for 10 sqm
7233 Fibre glass tissue reinforcement Type II Grade 75 sqm
114 Beldar 645 Day
9999 Chequer plate 2.12 L.S.
Add labour for laying 20 mm bed mortar
114 Beldar 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Cost for one sqm
Say
22.8.1 22.8 Providing and laying four courses water proofing treatment with bitumen felt
over roofs
22.8.1 Bitumen consisting
felt of firsttype
(hessian base) and3third
gradecourses of blown
I conforming to bitumen
IS : 132285/25 or 90/15
Blown or / and residual bitumen applied hot

= 2x1.45x30 = 87 kg
Hession felt type 3 Grade I
(hessian base self finished bitumen felt) = 30sqm
Add for over lapping @ 10% = 3 sqm.
Total = 33 Sqm
1177 Stone grit 6 mm and down size or pea sized g 800 cum
30x6=180 cudm
0.087tx2.7x.001x33=0.162t
= 2 quintals/t of bitumen i.e. 2x0.087=0.174q
9999 Praparing roof surface, sutting groove and ma 2.12 L.S.
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
130 Mistry 784 Day
9999 Sundries, brushes etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
22.9 22.9 Providing and laying six courses water proofing treatment with bitumen felt over
Code roofs consisting of first, third and fifth course
Description Rateof blown bitumen
Unit 85/25 or 90/15
Blown or / and residual bitumen applied hot (1.45+1.20+1.45)x30=123
Bitumen felt Type 3 grade 1
(hessian base self finished bitumen felt) = 60 sqm.+
Total =66 Sqm
0.123t+2.7x.001x66=0.273t
30x6=180cudm
= 2 quintals/t of bitumen i.e. 2x0.123=0.246q
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
Code roofs consisting of first, third and fifth courses
Description Rate of blown or Unit
/ and residual
Blown bitumen applied hot

(1.45+1.20+1.70)x30 = 130.5 kg.
Bitumen felt type B grade I (fibre base self

finished bitumen felt) = 60 sqm.
Total =66 Sqm
318 Bitumen felt fibre base (vegetable or animal): 70 sqm
(0.131 t+2.22x.001x66 = 0.275t)
30x6=180cudm
CARRIAGE:
Fuel (Steam coal) = 2 quintals/t of bitumen i.e. 0.1305=0.261q
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
Code roofs consisting of first, third and fifth courses
Description Rate of blown or Unit
/ and residual
Blown or / and residual bitumen applied hot

(1.45+1.20+1.70)x30 =130.5 kg.
Bitumen felt as per IS 7193 Grade II

(fibre base self finished bitumen felt) = 60
sqm. +
Total =66 Sqm
318 Bitumen felt fibre base (vegetable or animal): 70 sqm
(0.131t+3.08x.001x66=334t.)
30x6=180cudm
Fuel (Steam coal) = 2 quintals/t of bitumen i.e. 2x0.1305=0.261q
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
22.12 22.12 Supplying and applying bituminous solution primer on roof and / or wall surface
Code at 0.24 litre per sqm.
Details of cost for 10 sq. metres
MATERIAL
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
9999 Sundries brushes etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
22.13.1 22.13 Deduct for omitting in water proofing treatment final course of spreading stone
grit6 6cudm
22.13.1 at mm down
per sqmsize or pea sized gravel :
MATERIAL
6x10 = 60 cudm
9999 Labour for screening and spreading grit 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
22.13.2 22.13 Deduct for omitting in water proofing treatment final course of spreading stone
grit8 6cudm
22.13.2 at mm down
per sqmsize or pea sized gravel :
MATERIAL
6x10 = 60 cudm
9999 Labour for screening and spreading grit 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
22.14.1 22.14 Grading roof for water proofing treatment with

22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
Code 20mm nominal size)
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
9999 Sundries for laying in terrace 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one cum
Say

22.14.2 Cement mortar 1:3 (1 cement : 3 coarse sand)
MATERIAL
Cement mortar 1:3
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one cum
Say
22.14.3 Cement mortar 1:4 (1cement : 4 coarse sand)
MATERIAL
Cement mortar 1:4
LABOUR
114 Beldar 645 Day
101 Bhisti 714 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of one cum
Say
22.15 22.22 Providing and mixing integral crystalline admixture for water proofing treatment
Code to RCC structures like basement raft, retaining
Description Rate walls, reservior,
Unit sewage & water
MATERIAL
352 Integral crystalline admixture 230 kilogra
LABOUR
9999 For measuring, making and mixing etc. 2.12 L.S.
9977 Carriage of material and tools cost etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 kg
Say
22.16 22.22A Providing and applying fibre reinforced elastomeric liquid water proofing
membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of
MATERIAL
8511 Fibre reinforced elastomeric liquid water pro 230 litre
10.76 litre + 0.538 (Add wastage 5%) = 11.30 litre
LABOUR
115 Coolie 645 day
131 Painter 714 day
9999 Wire brush brushes, rollers etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
22.17.1 22.23 Providing and applying integral crystalline slurry of hydrophilic in nature for
waterproofing
22.23.1 For treatment
vertical surface to the@
two coats RCC
0.70structures
kg per sqmlike retaining walls of the
MATERIAL
351 Integral crystalline slurry 195 kilogra
(2 x .70kg / sq.mtr. = 1.40kg)
LABOUR
9999 For application of waterproofing material 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 sqm
Say
22.17.2 22.23 Providing and applying integral crystalline slurry of hydrophilic in nature for
waterproofing
22.23.2 For treatment
horizontal surface to coat
one the RCC structures
@1.10 like retaining walls of the
kg per sqm.
MATERIAL
(1 x 1.10kg / sq.mtr. = 1.10kg)
LABOUR
9999 For application of waterproofing material 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 sqm
Say
22.18 22.23A Providing & Applying polymer modified, flexible cementatious negative side
Code waterproofing coating with elastic waterproofing
Description Rate polymers on
Unitinterior wall
MATERIAL
8512 Cementitious water proofing coating with elas 225 kg
14.35 kg + 0.72 (Add wastage 5%) = 15.07 litre
LABOUR
115 Coolie 645 day
131 Painter 714 day
9999 Wire brush brushes, rollers etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
22.19 22.24 Providing and applying integral crystalline (dry shake) of hydrophilic in nature
Code for waterproofing treatment to the RCC structures
Description Rate like basement
Unit raft, foundation
MATERIAL
354 Integral crystalline dry shake 280 kilogra
LABOUR
9999 For measuring and sprinkling of waterproofing 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 sqm
Say
22.2 22.24A Providing & Applying high quality acrylic modified resin based texture of
Code Dholpur/Red sand stone Pattern with anti algae
Description Rate and UV resistance
Unit properties to
MATERIAL
8513 Acrylic modified resin based texture 42 kg
43.04 kg + 2.15 (Add wastage 5%) = 45.19 kg
Quantity taken for cost using once = 10 sqm
Top coat with premium acrylic exterior paint (two or more coats)
LABOUR
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
22.21.1 22.25 Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5
parts
22.25.1 For crystalline
sealing cracksmortar : 1 part
and faulty water) for the
construction treatment
joints, routedofout/making
faulty construction
U-shape
Code groove size 25x25mm and then primed the Rate
Description area with integral crystalline slurry
Unit
Details of cost for 1.00 meter
MATERIAL
353 Crystalline mortar 190 kilogra
@1.50 kg per meter
for priming and finishing

(3 x 0.05kg / meter) = 0.15kg
LABOUR
9999 For making crystalline mortar and repair work 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 meter
Say
22.21.2 22.25 Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5
22.25.2 parts crystalline
For patching mortar
of tie : 1 part
rod holes, water) for
prepared tie the
rodtreatment of faulty
hole surface construction
and then primed the
Code area with
Descriptionintegral crystalline slurry @0.070kg/sqm
Rate and while the
Unit surface is tacky
Details of cost for 1 no. hole
MATERIAL
353 Crystalline mortar 190 kilogra
@0.040 kg per hole
LABOUR
9999 For making crystalline mortar and repair work 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for each hole
Say
22.22 22.26 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in
Code linear meter (expansive nature) for construction
Description Rate joints treatment
Unit of RCC
Details of cost for 1.00 meter
MATERIAL
355 Swellable type water stop tape (Crystalline 325 metre
356 Primer for swellable type water stop tape 1300 litre
(@3.78 litre per 240 running meter)
LABOUR
9999 For application of primer and swellable water 2.12 L.S.
9977 Carriage and tools etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 metre
Say
23.1.1.1 23.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable
23.1.1 Allmethod
typesprescribed
of soil in IS: 2800 (part I), including collecting samples from differen
23.1.1.1 300 mm dia
MACHINERY :
20 Hydraulic Excavator (3D) with driver and fuel. 7000 Day
5 Hire charges of Diesel Truck - 9 tonne 3940 Day
Transportation charges for to and fro to site

(assume 140m of bore for one shifting) (2
x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
7763 Water supply tanker of 5000 litre capacity 1500 each
Extra labour to assist M/C operator &

security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 35 metre
Cost of 1 metre
Say
23.1.1 Allmethod
typesprescribed
23.1.1.2 350 mm dia
MACHINERY :

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day

security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 32 metre
Cost of 1 metre
Say
23.1.1 Allmethod
typesprescribed
23.1.1.3 400 mm dia
MACHINERY :

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day

security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 25 metre
Cost of 1 metre
Say
methodstrata
23.1.2 Rocky prescribed in IS:
including 2800 (part I), including collecting samples from differen
Boulders
23.1.2.1 300 mm dia
MACHINERY :
Extra diesel required for boring in rocky

strata

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day

security
134 Rock Hole Driller 645 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
methodstrata
Boulders
23.1.2.2 350 mm dia
MACHINERY :

strata

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day

security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
method prescribed in IS: 2800 (part I), including collecting samples from differen
23.1.2 Rocky strata including Boulders
23.1.2.3 400 mm dia
MACHINERY :

strata

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day

security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
method
23.2.1 All typesprescribed
23.2.1.1 300 mm dia
MACHINERY :

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day

security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
23.2.1 Allmethod
typesprescribed
23.2.1.2 350 mm dia
MACHINERY :
x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day

security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 27 metre
Cost of 1 metre
Say
23.2.1 Allmethod
typesprescribed
23.2.1.3 400 mm dia
MACHINERY :

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day

security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 20 metre
Cost of 1 metre
Say
methodstrata
Boulders
23.2.2.1 300 mm dia
MACHINERY :

strata

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
methodstrata
Boulders
23.2.2.2 350 mm dia
MACHINERY :

strata

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
methodstrata
Boulders
23.2.2.3 400 mm dia
MACHINERY :

strata

x30)/140
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
security
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 14 metre
Cost of 1 metre
Say
23.3.1 23.3 Supplying, assembling, lowering and fixing in vertical position in bore well,
23.3.1 100unplasticized
mm nominalPVC medium
size dia well casing (CM) pipe of required dia, conforming to
MATERIAL
7758 uPVC blind pipe 100 mm dia as per IS: 12818 405 metre
2319 Carriage of Spun iron S & S pipes 358.32 100 metre
Qty = 50 to consider 50% of carriage as per 2321
LABOUR
for lowering
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
unplasticized
23.3.2 150 mm nominal PVC medium
MATERIAL
LABOUR
for lowering
114 Beldar 645 Day
115 Coolie 645 Day
9999 Sundries (Adhesive etc.) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
MATERIAL
LABOUR
for lowering
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
23.4.1 23.4 Supplying, assembling, lowering and fixing in vertical position in bore well
size dia well screen (RMS) pipes with ribs, conforming to IS:
MATERIAL
7759 uPVC slotted pipe 100 mm dia as per IS: 128 425 metre
2319 Carriage of Spun iron S & S pipes 358.32 100 metre
LABOUR
for lowering
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
MATERIAL
LABOUR
for lowering
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
MATERIAL
LABOUR
for lowering
114 Beldar 645 Day
115 Coolie 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
23.5 23.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20
Code cm, in recharge pit, in the required thickness,
Description Ratefor all leads &Unit
lifts, all complete as
MATERIAL
7753 Stone Boulder 50 mm to 200 mm 810 cum
including carriage
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
23.6 23.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in
Code the recharge pit, over the existing layer of boulders,
Description Rate in required
Unit thickness, for all
MATERIAL
7754 Gravel 5 mm to 10 mm 815 cum
including carriage
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
23.7 23.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2
Code mm in recharge pit, in required thickness over
Description Rategravel layer, Unit
for all leads & lifts, al
MATERIAL
7755 Gravel 1.5 mm to 2 mm 815 cum
including carriage
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
23.8 23.8 Gravel packing in tubewell construction in accordance with IS: 4097, including
Code providing gravel fine/ medium/ coarse, in required
Description Rate grading & sizes as per actual
Unit
MATERIAL
7772 Pea Gravel 910 cum
including carriage
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
23.9 23.9 Providing and fixing factory made precast RCC perforated drain covers, having
Code concrete of strength not less than M-25, of Rate
Description size 1000 x 450x50
Unitmm, reinforced
Details of cost for 1 No. RCC drain cover
MATERIAL
7762 Precast R.C.C. perforated slab 875 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No.
Say
23.10.1 23.1 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW
(Electric
23.10.1 100 Resistance
mm nominal sizeWelded) FE minimum
dia having 410 mild steel
wall screwed
thicknessand socketed/plain
5.00 mm
MATERIAL
7757 M.S. pipe 100 mm dia casing pipe 780 metre
7764 M.S. socket 100 mm dia 125 each
including loading and unloading Painting with anticorrosive Paint 3.1
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
(Electric
wall screwed
5.00 mm
MATERIAL
including loading and unloading Painting with Anticorrosive Paint 3.1
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
(Electric
wall screwed
5.40 mm
MATERIAL
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
(Electric
mm nominal sizeWelded)
dia FE 410 plain slotted (having slot of size 1.6/3.2 mm)
MATERIAL
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
(Electric
MATERIAL
9999 Extra for making slots 2.12 L.S.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
(Electric
MATERIAL
9999 Extra for making slots 2.12 L.S.
LABOUR
114 Beldar 645 Day
130 Mistry 784 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
23.12 23.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to
Code establish maximum rate of usable water yield
Description without sand Unit
Rate content (beyond
Details of cost for 8 Hours
MACHINERY :
40 Air compressor 250 cfm with two leads for pn 1600 day
MATERIAL
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 8 Hours
Cost of 1 Hour
Say
23.13.1 23.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to
the top
23.13.1 100 mmofdiabore well housing/ casing pipe, removable as per requirement, all
MATERIAL
100mm dia MS screwed cap with locking

arrangement
7760 M.S. cap 100 mm dia 135 each
Add 5% labour facor on X
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
the top
MATERIAL

arrangement
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
the top
MATERIAL

arrangement
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
23.14.1 23.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe
of tubewell
23.14.1 100 mm clampas per IS: 2800 (part I), including necessary bolts & nuts of required
MATERIAL
Clamps made of MS flat of size 100x10mm

thick
1x2mt.x7.80 kg per mt.=15.60 kg.
9999 Sundries, nuts and bolts etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
of tubewell
MATERIAL

thick
1x2.10 mt.x7.80 kg per mt.=16.38 kg.
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
of tubewell
MATERIAL

thick
1x2.40 mt.x7.80 kg per mt.=18.72 kg.
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
23.15.1 23.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe
assembly
23.15.1 100 mm dia of tubewell as per IS:2800 (part I).
MATERIAL
7761 M.S. bail plug 100 mm dia 160 each
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
assembly
MATERIAL
7749 M.S bail plug 150 mm dia 200 each
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
assembly
MATERIAL
7750 M.S bail plug 200 mm dia 220 each
TOTAL
TOTAL
TOTAL
TOTAL
Total
Cost of 1 No
Say
24.1 24.1 Raking out joints of stone masonry surface to the required width and depth, with
Code due care and precaution, by mechanical / manual
Description Rate means, including
Unit preparing
LABOUR
114 Beldar 645 Day
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.2 24.2 Providing and fixing double scaffolding system (cup lock type) on the exterior
Code side of building/structure, upto 25 metre height,
Description Rate above ground
Unit level, including
Details of cost for area 2.5x9.0=202.50 sqm
MATERIAL
Assuming shuttering material will become unserviceable after use of
Taking slvage value after full use of material @ 25% of cost
7397 Base jack 145 each
Qty taken for cost of using once=14x0.85/40=0.2975
Vertical standard 2.5m length=7x2x9x2.5=
315.00 m
Side support 6.00m
length=3x2x6.00=36.00m
Horizonatal support 3.00m
length=18x3x3.00=162.00m
Total=1026.00m @ 3.67 kg/m =3765.42 kg
Qty taken for cost of using once=
3765.42x0.85/40=80.02kg
7387 Spigot for standard jointing 40 kg
7x2x9=126 nos x 0.40m length = 50.40m

@2.46kg /m=123.98kg
123.98x0.85/40=2.63kg
2x7x2x9=252 nos @ 0.15 kg each=37.80 kg

=0.378q
0.378x0.85/40=0.008q
7346 Double coupler 46 each
Clamp coupler for fixing MS tube with

scafolding
2x3x2+2x18x3=120 nos
120x0.85/40=2.55 nos
7398 Challies 765 each
3 nos x 18 lines=54 nos
Two level plate challies=2x18 lines=36nos
Total=90 nos
Qty taken for cost of using
once=90x0.85/40=1.9125 nos
7399 Cup lock 48 each
For Vertical standards=(5x7x2x9=630 nos)

+(2x18x19=694 nos)
Total=1314 nos
1314x0.85/40=27.92
40mm dia MS pipe=3765.42kg

25mm spigot=123.98kg
Nuts & bolts=37.80kg
clamp=120 nos@1.00kg each=120.00kg
Challies=90 nos @ 15.00kg each=1350.00kg
Cup locks=1314 nos @ 0.50kg each=
657.00kg
Total=6054.20kg=6.054 tonne
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 202.50 sqm
Cost of 1.00 sqm
Say
24.3 24.3 Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease,
Code oil, algae, fungus, monkey beats, vegetableRate
Description growth etc., including
Unit providing,
MATERIAL
7767 Stone cleaning chemical approved by ASI 270 litre
1 kg teepal of 3% solution for 10 sqm area

for 10sqm = 0.10 liter
7771 Liquid Amonia 5% 145 litre
LABOUR (for applying the camical Salution)
114 Beldar 645 Day
128 Mate 714 Day
9999 Cleaning T & P & its manitinance cost (Jet Pu 2.12 L.S.
LABOUR (for pressure cleaning)
114 Beldar 645 Day
128 Mate 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.4 24.4 Providing and applying antifungal wash treatment using 3% solution of sodium
Code pentachlorophenate, of reputed brand and Rate
Description manufacturer, onUnit
cleaned sand stone
MATERIAL
7775 Sodium pentachlorophenate 500 Kg
LABOUR
114 Beldar 645 Day
128 Mate 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.5 24.5 Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and
Code marble dust mortar in the ratio of 1:1.5:1/2 Rate
Description {One lime: 1.5 surkhi
Unit (50% red and
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.6 24.6 Ruled/ Flush pointing on White sand stone masonry surface with lime, surkhi and
Code marble dust mortar in the ratio of 1:1.5:1/2 Rate
Description {One lime : 1.5 surkhi
Unit (15% dark red
MATERIAL
LABOUR
115 Coolie 645 Day
101 Bhisti 714 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
24.7 24.7 Applying two or more coat of Ethyl Silicate chemical as approved by
Code Archaeological Survey of India/ Engineer-in-charge,
Description Rate of approved
Unit brand and
MATERIAL
7769 Stone surface strengthening chemical approv 835 litre
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.00 sqm
Cost of 1.00 sqm
Say
24.8 24.8 Applying breathable, non-reactive, antifungal, and water repellant

Code Silane/Siloxane chemical as approved by Archaeological
Description Rate Survey
Unit of India/
MATERIAL
7768 Water repallent chemical approved by ASI 1100 litre
7770 Turpentine oil 50 litre
LABOUR
131 Painter 714 Day
114 Beldar 645 Day
9999 Handling / Transportation charges 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 45.00 sqm
Cost of 1.00 sqm
Say
25.1 25.1 Providing and supplying aluminium extruded tubular and other aluminium
Code sections as per the architectural drawings Rate
Description and approved shop
Unitdrawings , the

Total Area 6.72 sqm, No of Panels 1 no
Aluminium Weight per sqm = 6.50 Kg/m2
Vision Height 2.2 m
Add for cleats, sleeves, screws etc.
@5% = 0.33 kg
add wastage @ 5% = 0.34 kg
Total = 7.17 kg
MATERIALS
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 6.5 kg
Cost for 1 kg
Say
25.2 25.2 Designing, fabricating, testing, protection, installing and fixing in position semi
Code (grid) unitized system of structural glazing Rate
Description (with open joints) for linear as well as
Unit
Aluminium Weight per sqm = 6.50 Kg/sqm
Vision Height 2.2 m
Sparndrel Height 2.0 m
MATERIALS
2605 Structural sealant - 6 mm x 12 mm 31 metre
2606 Spacer tape 6.4 mm thick x 6 mm wide 21 metre
2607 Weather Sealant - Non Staining (600 ml) 332 each
2608 Weather Sealant - Normal (300 ml) 102 each
2609 MS Brackets/Aluminium Alloy Brackets 104 kg
2610 Silicon Gasket in Kg (Above 50 g / m) 484 kg
2613 SS Bolt with washer of sizes for structural gl 37 each
2632 Fire Stop 480 metre
2616 GI flashing - 1.2 mm Thick 61 kg
9999 Sundries (Transporation) 2.12 L.S.
9999 Sundries (Scaffolding / Loading / Unloading) 2.12 L.S.
9999 Sundries (Designing charges etc.) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
25.3 25.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of
Code hermetically-sealed 6-12- 6 mm insulated glass
Description Rate (double glazed)
Unit vision panel units

Area of Glass deducting area of gap/
grove 5% = 6.38 sqm
Vision Height 2.2 m
Wastage 10% = 0.638 sqm say 0.7 sqm
Net = 7.02 sqm
MATERIALS
2617 6 mm thick High performance glass 1030 sqm
2618 6 mm thick clear heat strengthened glass 670 sqm
9999 Sundries (for insurance Charges) 2.12 L.S.
9999 Sundries ( Fabrication charges including silic 2.12 L.S.
9999 Transporation including loading and unloadin 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
25.4 25.4 Extra for openable side / top hung vision glass panels (IGUs) including providing
Code and supplying at site all accessories and hardwares
Description Rate for the Unit
openable panels as
Shuttter Weight
Outer glass 6 mm
Area 1.76 sqm
Inner glass 6 mm
Aluminium Weight per sqm 7.78 Kg
Al weight = 1.76x7.78 = 13.7 Kg
No of Locking Point 4 no Total 67 Kg
Wedge Block 1 no
MATERIALS
2619 6 mm thick clear heat strengthened glass 132 each
2620 ARMS GS HD -TOP HUNG -20"-TYPE P-C 1390 pair
2621 Connection Block for vision glass panel 36 each
2622 Curtain wall striker for vision glass panel 87 each
2623 Adjustable Fastening Pawl for vision glass pa 36 each
2624 Corner drive for vision glass panel 260 each
2625 Top wedge Block for vision glass panel 122 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.76 sqm
Cost for 1 sqm
Say
25.5 25.5 Providing, fabricating and supplying shadow box of required size and shape, for
Code fixing in the spandrel portion of the structural
Description Rateglazing, in linear
Unit as well as
Width of the unit = 0.86 m
Height of the unit = 3.75 m
Area = 3.23 sqm
Area including wastage @5 % = 3.39
MATERIALS
2626 Glass wool Denisity 48 Kg / m3 with Black Gl 255 sqm
2634 GI/Aluminium Sheet (0.8 mm thick) 55 kg
2627 SS Screws - # 8 x 19 7 each
2628 Weather Sealant - DC 789 125 cartrid
2629 Cement Board 245 sqm
9999 Sundries with clips & adhesives 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 3.23 sqm
Cost for 1 sqm
Say
25.6 25.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat
Code strengthened monolithic float glass of approved
Description Rate colour andUnit
shade with reflective
Width of the unit = 0.86 m

Height of the unit = 3.75 m
Area = 3.23 sqm
Area i/c wastage @ 5 % = 3.39 sqm
MATERIALS
2617 6 mm thick High performance glass 1030 sqm
9999 Sundries (Insurance charges) 2.12 L.S.
9999 Sundries (Fabrication charges including silico 2.12 L.S.
9999 Sundries (transporation including loading & u 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 3.23 sqm
Cost for 1 sqm
Say
25.7 25.8 Design supply & installation of suspended Spider Glazing system designed to
Code withstand the wind pressure as per IS 875 (Part-III).
Description Rate The Suspended
Unit System held
Description WD HT Nos Area

(Sqm)
Facade Area 7.00 5.04 1.00 35.28
Fin Area 0.40 2.30 5.00 4.60
(A) Spider Fitting
8945 4 Point spider fittings of SS-316 grade with fi 3318 Nos
8946 2 Point wall mounted spider fitting of SS-316 1659 Nos
8947 1 Point wall mounted spider fitting of SS-316 1300 Nos
8948 Flate head bolt 651 Nos
8949 400 mm long fin plate without fastners 5931 pair
(B) Local Hardware
For one point spider fitting =12x2=24 nos

For two point spider fitting =2x2=4 nos
For 400mm fin plates =5x6=30 nos
Total=58 nos
8560 Non staining water resistant Clear silicon filli 70 metre
Vr. joints between glasses = 7x5.04=35.28 m
Hr.joints between glass & wall =
2x7.00=14.00 m
Total=49.28 m
8559 Stainless steel U Channel of size (50x25x2m 160 metre
9999 Sundries(Baker Road, Screw &Accessories) 2.12 L.S.
9999 Labour 2.12 L.S.
(C) Glass Area
8778 Toughened glass 12 mm thickness 1750 sqm
with hole =7.00x5.04=35.28 sqm + 1.76 sqm

(Add 5% Wastage)
Total = 37.04 sqm
2415 21mm thick clear toughened Laminated glass fo 6120 sqm
= 5x2.30x.40=4.60sqm + 0.23sqm (Add 5%

Wastage)
Total = 4.83 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 35.28 sqm
Cost of 1 sqm
Say
26.1 26.1 Providing & fixing in position Phenol bonded Bamboowood flooring with planks
Code of sizes 14mm thick, minimum 1800 mm length
Description Rate and minimum 100 mm wide, in
Unit
Details of cost for 10m x 10m = 100 sqm
MATERIAL
8021 Bamboo wood Tile Flooring 14mm thick, min 3470 sqm
100 + 10 (Add for wastage @10%) = 110 sqm
8022 Bamboo wood Quarter Round 18mm thick of 115 metre
8023 Bamboo wood door reducer 14mm thick of s 255 metre
8015 Expanded poly ethylene Foam sheet 4mm thick 20 sqm
100 + 5 (Add for wastage @5%) = 105 sqm
1246 Silicon based Joint Sealant for Tiles 160 kg
1247 Rubber base Adhesive 223 kg
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.2 26.2 Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with
Code planks of sizes 14mm thick, 1900mm lengthRate
Description (minimum) andUnit
85mm
Detail of cost for 10 sqm skirting
MATERIAL
8024 Bamboo wood Skirting 14mm thick of Size 1 300 metre
Area of 1 length skirting is 1.9 m x 0.085 m =

0.162 sqm
Quantity required for 10 sqm = 10 / 0.1615 =
61.92 pieces
Add 2.5% wastage= 1.548
Total = 61.92 + 1.548 = 63.468
Qty in running mtr = 63.468 x1.9m = 120.59
running meter
8015 High Density Expanded poly ethylene Foam sh 20 sqm
10 + 0.5 (Add for wastage @5%) = 10.5 sqm
(62x3=186 nos)
1246 Silicon based Joint Sealant for Tiles 160 kg
1247 Rubber base Adhesive 223 kg
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.3 26.3 Providing & fixing in position Phenol bonded Bamboowood wall cladding at all
Code height with planks of sizes 10mm thick, minimum
length and minimum
Details of cost for 10m x 9.5m = 95 sqm
MATERIAL
8025 Bamboo wood Tile Wall Cladding 10mm thick 3400 sqm
10 x 9.5 = 95 + 9.5 (Add for wastage @10%) = 104.5 sqm
8026 Bamboo wood T-mold 14mm thick of size 1900 250 metre
At end joints of planks =

4x9.91 = 39.64 mtr + 1.98 (Add for wastage
5%)
= 41.62 mtr
8027 Bamboo wood Threshold 14mm thick of size 255 metre
At perriferi of cladding =
2x(10+9.5)+1.95 (Add for wastage
@5%)=40.95 metre
8016 High Density expanded poly ethylene (EPE) 10 sqm
(2x10x9.5) = 190 + 9.5 (Add for wastage @5%)=199.5 sqm
@500mm c/c at teak wood frame
(5nos in each panels)
No of panels=95/(1.9 x 0.135)=370 nos

No. of screws= 370 x 5=1850 nos
10 metre height, at every 1.9 meter height one length of 10 metre
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 95 sqm
Cost of 1 sqm
Say
26.4 26.4 Providing & fixing in position Phenol bonded Bamboowood panelled or panelled
Code and glazed shutters for doors windows, clerestorey
Description Rate windows with pre-molded
Unit
Details of cost for shutters of Bamboowood

200 x 108cm = 2.16 sqm
MATERIAL
8028 Bamboo wood shutter of doors 1700 10 cudm
Styles 4x2.00x0.115x0.03 =0.0276 cum +

Top rails 1x1.08x0.11x0.03m = 0.0036 cum
+
Bottom rails 1x1.08x0.212x0.03 = 0.0069
cum +
Lock rails 1x1.08x0.18x0.03 = 0.0058 cum
Total =0.0439 cum + 0.004 cum (Wastage
@5%)
Grand Total =0.0483 cum OR 4.830 cudm
LABOUR
114 Beldar 645 day
9999 Sundries T&P etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 2.16 sqm
Cost of 1 sqm
Say
26.5 26.5 Providing & fixing in position Phenol bonded Bamboo wood panelling of 10mm
Code thick, in 25 to 40 mm thick panelled or panelled
Description Rate & glazed shutters
Unit for doors,
Details of cost for shutters of a door with

2/3rd panelling…
200 x 108 = 2.16 sqm
Panel area = 4x45.1x36.55cm = 0.66 sqm
MATERIAL
8029 Bamboo wood panelling (10mm thick) 1680 10 cudm
4x47.2x38.65x1.0cm = 0.0073cum +
0.0007 sqm (Add Wastage @10%)
Total = 0.008 cum OR 8 cudm
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.66 sqm
Cost of 1 sqm
Say
26.6 26.6 Providing & fixing in position 65 mm thick factory made door frame of Phenol
Code bonded Bamboo wood (superior class, interior
Description Rate use), in approved
Unit colour, texture
Detail of cost for 33 cudm
MATERIAL
8030 Superior class Bamboo wood door frame 65 m 1675 10 cudm
2x206.75x9.5x6.5 cm = 0.0255 cum +
1x117.50x9.5x6.5 cm = 0.0072 cum
+ 0.001 cum (Add for wastage @ 5%)
Grand total = 0.034 cum = 34 Cudm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 33 cudm
Cost of 1 cudm
Say
26.7 26.6A Providing, erecting, laying and fixing in position in 3.5 to 4 mm thick bamboo ma
Code corrugated sheet (BMCS) as per IS: 15476-2004
Description Rate in roofing with
Unitself drilling
Details of cost for 181.30 sqm area
Consider a sheet of 18m x 9m (external

dimension of plinth)
Area of roof = 18.5 x 9.8 m = 181.30 sqm
MATERIAL
Sheets used = 2 x 19 nos (2.44m x 1.05m) &

4x19 nos (1.83m x 1.05m).
Total area = (2x19x2.44x1.05) +
(4x19x1.83x1.05) = 243.39 sqm
Total area = 250.69 sqm
8144 Bamboo Mat corrugated sheets 3.5 to 4mm thi 2648 sqm
Weight of sheets, For 2.44m x 1.05m sheet
size, 12kg/ nos x 38 nos = 456 kgs, For
1.83m x 1.05m sheet size, 9 kgs/nos x 76
nos = 684 kgs.
Total weight of sheet = 456 + 684 = 1140
kgs
=1.14 tonne
2358 Carriage of Bamboo Mat corrugated sheets a 17700 tonne
LABOUR
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 181.30 sqm
Cost of 1 sqm
Say
26.8 26.6B Providing and fixing in position ridges of 3.5 to 4 mm thick bamboo mat ridge
Code cap (BMRC) as per IS: 15476-2004 in roofing
Description with self drilling
Rate screws along with
Unit
Details of cost for lenght of ridge 18.50 metre

(pair of 43 cm width each)
Consider a shed of 18m x 9m (external

dimension of plinth)
Length of ridge = 18.50 metre
MATERIAL
Ridges (male & Female) of size:1.05 m
length required = 20 sets x 1.05 m = 21.00
metre
Add wastage @5% = 1.05 metre
Total length = 22.05 metre.
8145 Bamboo Mat Ridge cap 3.5 to 4mm thick conf 2570 metre
9977 Carriage (The ridges to be fixed with the sam 2.12 L.S.
(The ridges to be fixed with the same hooks as sheets)
LABOUR
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 18.50 metre
Cost of 1 metre
Say
26.9 26.6C Providing and fixing at all height false ceiling of 4mm thick phenol bonded
Code Bamboo Mat board (595x595mm) conforming
Description to IS:13958-1994
Rate Unitincluding
Celing Area = 100 sqm

Add wastage @5% = 5 sqm
Total = 105 sqm
MATERIAL
8147 4mm thick Bamboo Mat Board conforming to 1738 sqm
Weight : (0.595 x 0.595 m of Bamboo board)

Total number of board = 297
Total weight of bamboo board = 297 x 131
kgs/ nos = 389.07 kgs = 0.39 tonne
2358 Carriage of 4mm thick Bamboo mat board and 17700 tonne
8570 GI Main T ceiling section 30x25x0.3 mm (3 me 210 each
8571 GI Perimeter wall angle 25x25x0.4 mm (3 metr 170 each
8572 GI Intermediate cross T section 25x25x0.3 mm 80 each
8573 GI Intermediate cross T section 25x25x0.3 mm 35 each
8616 Adjustment clip 85x30x0.8 mm 6 each
9977 Carriage of grid materials 2.12 L.S.
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.10.1 26.6D Providing and fixing at Bamboo Mat board conforming to IS:13958-1994 for
partition
26.6D.1 3mm to frame by bucking or studding with screws etc. complete (Frames,
thickness
Details of cost for 3.5m x 2m = 7.0 sqm
Partiton area = 7.0 sqm

Add wastage @5% = 0.35 sqm
MATERIAL
Weight : 7.35 sqm x 2.70 kgs/sqm = 19.845
kgs
0.02 tonne
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7 sqm
Cost of 1 sqm
Say
partition
thickness

MATERIAL
kgs
0.03 tonne
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7 sqm
Cost of 1 sqm
Say
26.6D.3 partition
6mm to frame by bucking or studding with screws etc. complete (Frames,
thickness
MATERIAL
kgs
0.04 tonne
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7 sqm
Cost of 1 sqm
Say
partition
thickness

MATERIAL
kgs
0.06 tonne
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7 sqm
Cost of 1 sqm
Say
partition
thickness

MATERIAL

kgs
0.07 tonne
2358 Carriage of 12mm thick Bamboo mat board an 17700 tonne
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 7 sqm
Cost of 1 sqm
Say
26.11.1 26.6E Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat
boardthickness
26.6E.1 9mm conforming to IS:13958-1994 including providing and fixing to frame work
Details of cost for panelling area of 5m x 4m = 20.00sqm with moulding
Wall panelling area = 20.00 sqm

MATERIAL
Weight : 21sqm x 8.40 kgs/sqm = 176.4 kgs

=0.18 tonne
1316 50mmx50mm hardwood plug 50 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20 sqm
Cost of 1 sqm
Say
26.11.2 26.6E Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat
26.6E.2 board conforming
12mm thickness to IS:13958-1994 including providing and fixing to frame work
Details of cost for panelling area of 5m x 4m = 20.00sqm with moulding
Wall panelling area = 20.00 sqm

MATERIAL
Weight : 21sqm x 10 kgs/sqm = 210 kgs
=0.21 tonne
2358 Carriage of 12mm thick Bamboo mat board an 17700 tonne
1316 50mmx50mm hardwood plug 50 each
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20 sqm
Cost of 1 sqm
Say
26.12 26.7 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of
Code required size between cavity wall, complying
Description with ISO 4898:2008
Rate Unit & ASTM C 578-
MATERIAL
8561 Extruded polystyrene rigid insulation board 5 550 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 Day
9999 Sundries (Water based adhesive, fasteners, sc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.13 26.8 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of
Code required size underdeck on ceiling surface,Rate
Description complying withUnit
ISO 4898:2008 &
MATERIAL
8561 Extruded polystyrene rigid insulation board 5 550 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 Day
9999 Sundries (Water based adhesive, fasteners, sc 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.14 26.9 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet
Code frame (45 x 20 mm) of approved shade, quality
Description Rateand make. The
Unitprofile shall be
Details of cost for kitchen cabinate

(2.00 x 0.45)+(2.00+0.61)= 2.13 mtr
MATERIAL
2491 Pre laminated both side solid foam uPVC profi 134 metre
2493 PVC edge beading 32 metre
2494 Expandable fastner with plastic sleeve 6 each
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.13 metre
Cost for 1 metre
Say
26.15 26.1 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm
Code nominal thickness of approved shade, quality
Description Rateand make, made
Unit from rigid foam
Details of cost for of one shutter

0.46x0.61m =0.281 sqm
MATERIAL
2492 Solid foam uPVC sheet 20mm thick pre lamina 2153 sqm
2493 PVC edge beading 32 metre
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 0.281 sqm
Cost for 1 sqm
Say
26.16 26.11 Providing and fixing concealed hinge of approved quality for 19-20mm thick door
Code with stainless steel screws complete :
MATERIAL
8226 Concealed zinc coated hinges 19-20 mm thick 460 10 Nos
LABOUR
114 Beldar 645 Day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
26.17 26.12 Supplying & laying of bi-axial extruded high modulus polypropylene geogrid
Code coforming to MORTH SPECIFICATION for base/sub-base
Description Rate reinforcement
Unit having
MATERIAL
8956 Bi-Axial Extruded GeoGrids of Minimum Tensil 120 sqm
Add 10 per cent of (A) the cost of reinforcing

elements (synthetic geogrids) for wastage
and accessories like tie-strips, nuts and
bolts and loops/lugs for joining reinforcing
elements with the facia pannels, overlaps
and other protective elements for synthetic
geogrids and all other activities required to
complete the item in all respect including
taxes and transportation.
LABOUR
128 Mate 714 day
114 Beldar 645 day
139 Skilled Beldar 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
Unit having
MATERIAL

LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
Unit having
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
Unit having
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
26.21 26.16 Supplying & laying of drainage composite for use behind walls, between two
Code different fills, alongside drains of road, below
Description concrete lining
Rate of canals etc.
Unit
MATERIAL
8960 Geosynthetic Drainage with two filtering nonw 530 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
26.22 26.17 Supplying & laying of drainage composite for use behind walls, between two
Code different fills, alongside drains of road, below
Description concrete lining
Rate of canals etc.
Unit
MATERIAL
8961 Geosynthetic Drainage Composite having thermo 630 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
26.23.1 26.18 Supplying and laying high strength flexible geogrids (HSFG) as soil
reinforcement
26.18.1 Ultimate tensile/ basal reinforcement
strength- 100 kN/m as per MORTH 3100 and IRC 113, made of
MATERIAL
8962 Synthetic Geogrid having Ultimate tensile st 200 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
8963 Synthetic Geogrid Ultimate tensile strength- 210 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
8968 Synthetic Geogrid Ultimate tensile strength 450 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
8975 Synthetic Geogrid Ultimate tensile strength 1000 sqm
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
reinforcement
MATERIAL
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost per sqm
Say
26.24.1 26.19 Providing at all heights, levels and locations Aluminium profile industrial
troughed
26.19.1 0.71 sheetthe
mm thick, of Alloy 31500/31000/40800,
profile conforming
detail width 1044/920 to width
mm, cover IS 1254, IS 737, mm.
1000/875 IS
Area of roof- 20.20x10.70m = 216.14 sqm.
MATERIAL
Sheets used = 20 Nos x 10.70m x 1.044m =
223.42 sqm, Add 3% wastage = 6.70 sqm
Total = 230.12sqm
8977 Aluminium profile industrial troughed sheet o 600 sqm
LABOUR
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
26.24.2 26.19 Providing at all heights, levels and locations Aluminium profile industrial
troughed
26.19.2 0.91 sheetthe
mm thick, of Alloy 31500/31000/40800,
profile conforming
detail width 1044/920 to width
mm, cover IS 1254, IS 737, mm.
1000/875 IS
Area of roof- 20.05x10.70m = 216.14 sqm.
MATERIAL
Sheets used = 20 Nos x 10.70m x 1.044m =

223.42 sqm, Add 3% wastage = 6.70 sqm
Total = 230.12sqm
8978 Aluminium profile industrial troughed sheet o 785 sqm
LABOUR
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 216.14 sqm
Cost of 1 sqm
Say
26.25.1 26.22 Providing and fixing false ceiling at all heights with integral densified calcium
silicate
26.22.1 With 15 reinforced with fibre
mm thick tegular andlight
edged natural fillercalcium
weight false ceiling tiles
silicate of Size
false ceiling tiles.
MATERIAL
Celling Area = 100 sqm + Add 5% wastage =

5 sqm
Total = 105 sqm
including wastage @10%
8588 Galavanised MS hanger rod 6mm dia MS fully 28 each
9801 Galvanised MS L-Shape level adjuster of si 15 each
9802 12x50 mm long dash fastener 35 each
9803 Galvanized MS Z Cleat of size 25 x 37 x 25 x 12 each
8211 Stainless steel screws 40 mm with plastic raw 250 100 Nos
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
silicate
26.22.2 With 15 reinforced with fibre and
mm thick tegular/butt natural
edged fillerperforation,
without false ceilingplain/designer
tiles of Size light
Code weight calcium
Description silicate Anti-Microbial Bio-safe
Ratecoated false ceiling tiles
Unit
MATERIAL
9804 With 15 mm tegular/butt edged without perforati 830 sqm

5 sqm
Total = 105 sqm
9801 Galvanised MS L-Shape level adjuster of si 15 each
9802 12x50 mm long dash fastener 35 each
9803 Galvanized MS Z Cleat of size 25 x 37 x 25 x 12 each
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
silicate
26.23.1 With 15 reinforced with fibre
mm thick integral and natural
densified microfiller
edgefalse ceiling
light weighttiles of Size
calcium 595x595
silicate false
Code ceiling tiles
MATERIAL
8563 15 mm thick, light weight, integral densified m 725 sqm

5 sqm
Total = 105 sqm
SILHOUETTE Profile grid frame :
8567 Galvanized mild steel perimeter wall angle 125 each
8566 Powder coated steel section main-T ceiling 260 each
8568 Powder coated Galvanised Iron intermediate 105 each
8569 Powder coated Galvanized Iron intermediate 50 each
8619 Galavanised MS L-shape level adjuster of s 15 each
8515 Galavanised MS 8 mm outer diameter M-6 da 42 each
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
26.27.1 26.24 Providing and fixing in position wall panelling at all heights with integral
densified
26.24.1 With 15 mm calcium
thick silicate panels/tiles
fully perforated of size 595
square/butt x 595mm,
edge having
light weight NRC (Noise
calcium silicate
Code panels/ tiles
Details of cost for 6.00 x 3.65=21.90 sqm
MATERIAL
8564 15 mm thick, light weight,fully perforated squa 900 sqm
21.90 sqm + 1.10 sqm (Add 5% wastage)

Total = 23.00 sqm
2 x 6.00 m=12m +0.60 (Add 5% wastage )

= 12.60 m
11 x 3.65 m = 40.15 m + 5 x 6.00 = 30.00 m

Total= 70.15 m +3.51 ( Add 5% wastage )
Total = 73.66m
7025 Self tapping pan head nickel coated mild stee 480 ### Nos
7383 12 mm dia 50 mm long wedge type expanded z 7 each
7274 Glass wool 50 mm thick 200 sqm
21.90 +1.10 (Add 5% wastage) = 23.00 sqm
764 Calcium silicate base compound for jointing cal 26 kg
22.81/103.68 x 21.9 = 4.82 kgs
7026 Fibre joint tape 50 mm wide (90 metre) roll 150 each rol
1.27/103.68 x 21.90 = 0.27 roll
LABOUR
0.30x21.90=6.57 days
0.13x21.90=2.847 days
114 Beldar 645 day
0.35x21.90=7.665 days
131 Painter 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 21.90 sqm.
Cost of 1 sqm.
Say
26.28 26.25 Providing and fixing 15 mm thick false ceiling tiles at all heights with integral
Code densified calcium silicate reinforced with fibre
Description Rateand natural filler
Unit false ceiling tiles
MATERIAL
10 + 0.5 (Add wastage @5%) = 10.5 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.29.1 26.26 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced
Gypsum)
26.26.1 With semifalse ceiling12
perforated tiles
mm ofthick
Size micro
595x595 mm of
tegular approved
edged GRG texture, design
false ceiling and
tiles.
MATERIAL
Celling area =100 sqm

Add wastage @ 5% = 5 sqm
Total=105.00 sqm
8581 12 mm thick micro tegular edged semi perfor 550 sqm
8555 G.I main runner 15 x32 mm of 3000 mm length 190 each
Including wastage @ 10%
8556 G.I cross-T 15 x32 mm of 1200 mm length, 0. 78 each
8587 Galvanized iron intermediate cross-T sectio 37 each
8596 Galvanised MS 8mm outer diameter M-6 dash 35 each
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.29.2 26.26 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced
Gypsum)
26.26.2 With fully false ceiling12
perforated tiles
mmofthick
Sizemicro
595x595 mm of
tegular approved
edged texture,
or 10 mm thickdesign
squareand
Code edged GRG false ceiling tiles.
MATERIAL
Celling area =100 sqm

Add wastage @ 5% = 5 sqm
Total=105.00 sqm
8582 12 mm thick micro tegular edged fully perfor 600 sqm
8555 G.I main runner 15 x32 mm of 3000 mm length 190 each
8556 G.I cross-T 15 x32 mm of 1200 mm length, 0. 78 each
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.30.1 26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size
595X595mm
26.27.1 With of approved
16 mm thick beveledtexture,
tegular design
mineraland pattern.
fibre The tiles
false ceiling tileshould have
(NRC 0.55 to 0.6
MATERIAL
8552 Mineral fibre beveled tegular edged ceiling tiles 835 sqm
Area = 100 sqm + 5 sqm (Add for wastage

@5%)
Total = 105 sqm
8555 G.I. main runner 15X32mm of 3000 mm lengt 190 each
including 10 % wastage
8556 G.I. cross Tee 15X32mm of 1200mm length 78 each
8557 G.I. cross Tee 15X32mm of 600mm length, 0. 35 each
8558 Galvanised Iron hanger rod 6mm dia fully th 26 each
8515 Galavanised MS 8 mm outer diameter M-6 da 42 each
9999 Sundries i.e. scaffolding etc 2.12 L.S.
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
595X595mm
tegular design
mineraland pattern.
fibre The tiles
false ceiling tileshould have
(NRC 0.7)
MATERIAL
8554 Mineral fibre beveled tegular edged ceiling t 1045 sqm

@5%)
Total = 105 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
595X595mm
tegular design
mineraland pattern.
fibre The tiles false
Anti-microbial should have tile
ceiling
Code confirming to ISO 5 (class 100 ) specifications
MATERIAL
8553 Mineral fibre beveled tegular edged ceiling ti 925 sqm

@5%)
Total = 105 sqm
8557 G.I. cross Tee 15X32mm of 600mm length, 0. 35 each
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.31.1 26.28 Chipping of unsound/weak concrete material from slabs, beams, columns etc.
with manual
26.28.1 75mm averageChisel and/ or by standard power driven percussion type or of
thickness
Details of cost for One Sqm
75mm average thickness for beams
MACHINERY
9999 Hire charges for HILTY-TE 504 Pneumatic Chi 2.12 L.S.
LABOUR
157 Machine Operator 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.0 sqm
Say
with manual
26.28.2 50mm averageChisel and/ or by standard power driven percussion type or of
thickness
MACHINERY
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.0 sqm
Say
with
26.28.3 25 mmmanual Chisel
average and/ or by standard power driven percussion type or of
thickness
MACHINERY
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.0 sqm
Say
26.32.1 26.29 Cleaning of reinforcement from rust from the reinforcing bars to give it a total
rust free
26.29.1 Bars uptosteel
12 mmsurface by using alkaline chemical rust remover of approved
diameter
Detail of cost for 3.00 sqm (95.54 meter length of 10 mm dia bar)
Bars upto 12 mm diameter
(1 litre chemical shall cover 3.00 sqm area of bars)
MATERIALS
7911 Chemical Rust Remover 245 litre
(Rust off from M/s Sika/Dr. Fixit from M/s Pidilite/Reebak Clean from M
LABOUR
(Application charges for 3.0 sqm)
131 Painter 714 day
115 Coolie 645 day
9999 Putty, brush, sand paper 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3 sqm (95.54 m length of 10 mm dia bar)
Rate per meter length of bar
Say
26.32.2 26.29 Cleaning of reinforcement from rust from the reinforcing bars to give it a total
rust free
26.29.2 Bars steel
above surface
12 mm by using alkaline chemical rust remover of approved
diameter
Detail of cost for 3.00 sqm (47.78 meter length of 20 mm dia bar)
Bars above 12 mm diameter
(1 litre chemical shall cover 3.00 sqm area of bars)
MATERIALS
7911 Chemical Rust Remover 245 litre
(Rust off from M/s Sika/Dr. Fixit from M/s Pidilite/Reebak Clean from M
LABOUR
(Application charges for 3.0 sqm)
131 Painter 714 day
115 Coolie 645 day
9999 Putty, brush, sand paper 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.00 sqm (47.78m length of 20 mm dia bar)
Rate per meter length of bar
Say
26.33.1 26.3 Drilling suitable holes in reinforced or plain cement concrete with power driven
drill machine
26.30.1 Upto to a minimum
and including depth of 100mm upto 200mm in RCC beams, lintels,
12mm dia.
MATERIAL
7913 Epoxy 585 kg
(Lokfix of M/s Fosroc / X-Tite Resiloc EX-22 of M/s X Calibur)
Approx unit Weight of Epoxy= 2000kg/cum or 2gm/cucm
Volume of Epoxy filled =3.14/4[(1.5)2-(1.2)2] x 15.5cm = 9.86cucm
Weight of Epoxy for 10 holes=10x9.86 x 2 = 197.20 gms say 200gms =
MACHINERY
88 Hire charges of Drill machine upto 30 mm dia 160 day
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Rate for 10 holes
Rate for one hole
Say
26.34.1 26.31 Providing, mixing and applying bonding coat of approved adhesive on chipped
26.31.1 portion of RCC(@10%
SBR Polymer as perofspecifications
cement weight)and direction
modified of Engineer-In-charge
cementitious bond coat @ 2.2
Code kg cement
Description per sqm of surface area mixed with
Ratespecified proportion
Unit of approved
Details of Cost for 10.00 Sqm bonding coat
MATERIAL
7914 SBR Polymer 175 kg
@ 10% of cement weight= 22.00kgx10%=2.2 kg
(Shell Crete SBR from M/s Supreme Bituchem India Pvt Ltd/HWC SBR f
LABOUR
115 Coolie 645 day
9999 Scaffolding and sundries (8.06/2=4.03) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10.00 sqm
Rate per sqm
Say
26.34.2 26.31 Providing, mixing and applying bonding coat of approved adhesive on chipped
portionbonding
26.31.2 Epoxy of RCC as per specifications
adhesive and direction
having coverage of Engineer-In-charge
2.20 sqm/kg of approved make
Details of Cost for 2.20 Sqm
7913 Epoxy 585 kg
(Nitobond EP from M/s Fosroc/Velosit EA 332 from M/s Velosit/Shell O
9999 Application charge for applying bonding coat 2.12 L.S.
9999 Cost of brushes etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 2.20 sqm
Rate per sqm
Say
26.35.1 26.32 Providing, mixing and applying SBR polymer (of approved make) modified
26.32.1 12Cement mortar in
mm average proportion of 1:4 (1 cement: 4 graded coarse sand with
thickness.
Details of Cost for 10 Sqm
MATERIAL
Cement mortar 1:4 (1 cement : 4 coarse sand) = 0.144 Cum
Qty of cement in mortar= 0.144x0.38 = 0.055 MT or 55kg
@ 2% of weight of cement 55kgx2%=1.10 kg
(Shell Crete SBR from M/s Supreme Bituchem India Pvt Ltd/HWC SBR fr
LABOUR
115 Coolie 645 day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Rate per sqm
Say
Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with
26.32.2 25 mm average thickness in 2 layers.
MATERIAL
Cement mortar 1:4 (1 cement : 4 coarse sand) =(0.144/12)x25=0.30
Cement 0.30x0.38 = 0.114 MT OR 114 kg
@ 2% of weight of cement 114kgx2%=2.28kg
LABOUR
115 Coolie 645 day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Rate per sqm
Say
26.32.3 50Cement mortar in
mm average proportion
thickness in 3oflayers.
1:4 (1 cement: 4 graded coarse sand with
MATERIAL
Cement mortar 1:4 (1 cement : 4 coarse sand) 0.144/12)x50= 0.60 C
Cement 0.60x0.38 = 0.228 MT OR 228 kg
@ 2% of weight of cement 228kgx2%=4.56 kg
LABOUR
115 Coolie 645 day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 10 sqm
Rate per sqm
Say
26.36.1 26.33 Providing, mixing and applying SBR polymer (of approved make @ minimum 2%
by wt. of
26.33.1 50mm cement
thick used)
in Grade M modified plain/reinforced
25 with cement cement
content not concrete
less than 330 kgforper
structural
cum
Detail of cost for 10 sqm area (0.5cum)
M25 concrete 0.5 cum of concrete@ 330 kg/cum
Deduction of pumping charges
@2% of cement 165 kg = 165X2% = 3.3 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.36.2 26.33 Providing, mixing and applying SBR polymer (of approved make @ minimum 2%
by wt. of
26.33.2 75mm cement
thick used)
in Grade M modified plain/reinforced
25 with cement cement
content not concrete
less than forper
330 kg structural
cum
Deduction of pumping charges
@2% of cement 247.50 kg = 247.50X2% = 4.95 kg
Shell Crete SBR from M/s Supreme Bituchem India Pvt Ltd/HWC SBR fro
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.37.1 26.34 Providing and laying SBR Polymer modified (of approved make @ minimum 2%
by wt. of
26.34.1 50mm cement
thick used)
in Grade M plain/reinforced concretenot
25 with cement content jacket
less for the
than structural
330 kg per cum
M25 concrete 0.5 cum of concrete with cement content 330 kg/cum
@2% of cement 165 kg = 165X2% = 3.3 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
by wt. of
26.34.2 75mm cement
thick used)
in Grade M plain/reinforced concretenot
25 with cement content jacket
less for the
than structural
330 kg per cum
@2% of cement 247.50 kg = 247.50X2% = 4.95 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
by wt. ofthick
26.34.3 100mm cement used)Mplain/reinforced
in Grade 25 with cementconcrete jacket
content not for
less the 330
than structural
kg per cum
Detail of cost for 10 sqm area (1.00 cum)
@2% of cement 330 kg = 330X2% = 6.6 kg
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.38.1 26.35 Providing and injecting approved grout in proportion recommended by the
26.35.1 manufacturer into cracks/honey-comb
Stirrer mixed Acrylic areamake
Polymer of approved of concrete/masonry bycement
@ 2% of weight of suitableused)
Code modified Cement slurry made with non shrink
Description Ratecompound inUnit
concrete/RCC work
Detail of cost for 100 kg Acrylic polymer mixed cement grout
MATERIAL
7927 Acrylic Polymer chemical for cracks 31 kg
(Cebex 100 from M/s Fosroc/Pidicrete AM from M/s Pidilite/Intraplast
9999 Injecting charges of Stirrer mixed polymer gro 2.12 L.S.
LABOUR
122 Foreman 784 day
157 Nozzleman 784 day
157 Pump Operator 784 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 kg
Cost of 1 kg
Say
manufacturer
26.35.2 Stirrer mixed SBRinto cracks/honey-comb
Polymer (of approvedarea of concrete/masonry
make) modified Cement by suitable
slurry made
Code with Shrinkage Compensating Cement in concrete/RCC
Description Rate work.
Unit
Detail of cost for 100 kg of SBR polymer mixed cement grout
MATERIAL
(Shell Crete SBR from M/s Supreme Bituchem India Pvt Ltd/HWC SBR fro
9999 Injecting charges of Stirrer mixed polymer gro 2.12 L.S.
LABOUR
122 Foreman 784 day
157 Nozzle Operator 784 day
157 Pump Operator 784 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 kg
Cost of 1 kg
Say
manufacturer
26.35.3 Epoxy into
injection cracks/honey-comb
grout in concrete/RCC area
workof
ofconcrete/masonry
approved make by suitable
Details of cost for10kg Epoxy grout
MATERIAL
7913 Epoxy 585 kg
Epoxy grout of approved make (Like X Tite Injection Grout EP of M/s
92 Hire charges of Plant and machinery, it can in 200 day
LABOUR
114 Beldar 645 day
157 Nozzle Operator 784 day
9999 Sundries (gloves gogles etc.) 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 kg
Cost of 1 kg
Say
26.39.1 26.36 Providing, erecting, maintaining and removing temporary protective screens
made outPVC
26.36.1 Wooven of specified
cloth fabric with all necessary fixing arrangement to ensure that
MATERIAL
7915 Wooven PVC cloth 25 sqm
9999 Fixing double scaffolding outside 2.12 L.S.
Total Material
LABOUR
For fixing and removal after complete of work @25%
TOTAL
TOTAL
TOTAL
TOTAL
Rate for 10 sqm
Rate for 1 sqm
Say
26.4 26.37 Cleaning of exposed concrete surface of sticking material including loose and
Code foreign material by sand blasting with coarse
Description sand followedUnit
Rate by and including
Machinery
89 Hire charges of sand blasting equipment 400 day
(14 sqm per day)
90 Hire charges of compressor 500 day
Material
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.41.1 26.38 Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved
designthick
26.38.1 25mm mix concrete
in Grade having thecement
M 25 with specified minimum
content characteristic
not less than 330 kgcompressive
per cum
Cubical qty of concrete for 10 sqm =

10x1.00x0.025 = 0.25 cum
Wastage 25%, = 0.25x25/100=0.0625 cum
Total=0.3125 cum
Machinary
86 Compressor, gun, rubber pipes & other accesso 4000 day
(approx. 40 sqm area of shotcrete per day = 10/40 = 0.25 day)
Labour
157 Operator (Pile/ Special machine) 784 day
154 Nozzel man/ gun man 784 day
161 Helper (Technician) 645 day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
designthick
per cum
Cubical qty of concrete for 10 sqm

= 10x1.00x0.050 = 0.50 cum
Wastage 25%, = 0.50x25/100=0.125 cum
Total=0.625 cum
Machinary
Labour
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
designthick
per cum
Cubical qty of concrete for 10 sqm =

10x1.00x0.025 = 0.25 cum
Wastage 25%, = 0.25x25/100=0.0625 cum
Total=0.3125 cum
Machinary
Labour
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.42 26.39 Providing and inserting 12mm dia galvanised steel injection nipple in honey
Code comb area and along crack line including drilling
Description Rate of holes ofUnit
required diametre
Details of cost for 20.00 Nos Hole
MATERIAL
7921 Adhesive chemical 2 ml
(750 mm deep & 20 mm Dia Hole)

Volume of hole
=20x(3.14/4)x2.00x2.00x7.5=471 cm3
Adhesive @ 40% of 471 ml=188.40 ml, Say 188 ml
7922 Bit of drilling machine for Hole upto 30mm dia 500 each
(One Bit done 20 Holes only)
7923 GI injection nipple 12mm dia, 75mm long 45 each
7924 Blowing compressed air for cleaning holes up 10 each
LABOUR
115 Coolie 645 day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 20 Nos hole
Cost of 1 hole
Say
26.43 26.4 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or
Code other suitable size wire mesh to be fixed & Rate
Description firmly anchored Unit
to the concrete
Details of cost for 10.00 sqm ( i.e 77.50 kg.)
MATERIAL
7925 L shaped 100mm long, 10mm dia mild steel s 80 kg
key to be provided at 0.5 mtr centre to centre in each direction
Total no. of Shear key of MS Bar in 10sqm = 25 nos
25x0.10x0.617=1.55 kg
91 Welding charges of shear key to existing rein 5 each
75x25mm, weight 7.75kg/sqm
75x25 mm = 10.00 sqm + Add 5% wastage = 0.50 sqm Total = 10.
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.44 26.41 Designing, providing, installing and fixing factory finished custom designed cold
Code form Light Gauge Steel Framed super structure
Description Rate comprisingUnit
of steel wall panel,
Details of cost for 1.00 Kg
MATERIAL
8579 Cold form light gauge Steel C-section of thick 140 kg
= 1.00 + 0.05 (Add for wastage @5%) = 1.05 kg
Deduct for
8580 Scrap value wastage of cold form light gauge 18 kg
Labour for assembling/ fixing etc
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1.00 kg
Say
26.45.1 26.42 Providing and fixing of external wall system on Light gauge steel frame work
26.42.1 with
OuterOuter
face:face
Outercement boards6mm
face having as per standard
thick sizes fixed
fiber cement with
board self-drilling
fixed /
on 9mm thick
Code fiber cement board, Type A, as per IS:14862:2000
Description Rate (high pressure
Unit steam cured)
MATERIAL
238 6 mm thick heavy duty fiber cement board 470 sqm
1 x 10 = 10 Sqm + 1.00 (Add for wastage @10%) Total = 11.00 Sqm
2636 GI Screws of gauge 10, length 45 mm for fixi 3.1 each
26.42A Filling the groove of 2 mm to 3 mm between 92.85 sqm
Inner face :
239 8mm thick heavy duty fiber cement board 300 sqm
26.42B Filling the groove of 2 mm to 3 mm between 8 243.75 sqm
LABOUR
For cutting and fixing of cement and gypsum board
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.45.2 26.42 Providing and fixing of external wall system on Light gauge steel frame work
26.42.2 with
OuterOuter
face:face
Outercement boards8 as
face having mm per standard
thick cementsizes fixedparticle
bonded with self-drilling
board fixed/ on
Code 10 mm thick cement bonded particle board.Rate
Description (Termite, Fire and
UnitMoisture
MATERIAL
243 8 mm thick mulitipurpose cement bonded wood 215 sqm
9704 10 mm thick Cement Bonded particle board 475 sqm
Inner face :
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.46.1 26.43 Providing and fixing internal wall panels on Light gauge steel frame work with
12.5mm Fiber
26.43.1 Cement thick gypsum
Board 8 mmplaster board
thick conforming
as per IS 2095:2011
IS 14862:2000 of type Bfixed onpressure
(High 8mm thick
Code Steam Cured)
MATERIAL
239 8mm thick heavy duty fiber cement board 300 sqm
2x10 = 20 sqm + 2.00 (Add for wastage

@10%)
= 22.00 sqm
241 12.5 mm thick Gypsum plaster board 170 sqm

@10%)
= 22.00 sqm
Taping and finishing cement board joints
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
26.46.2 26.43 Providing and fixing internal wall panels on Light gauge steel frame work with
12.5mm Bonded
26.43.2 Cement thick gypsum plaster
particle boardboard
8 mmconforming IS 2095:2011
(Termite, Fire & Moisturefixed on 8mm as
Resistance), thick
Code per IS:14276:1995
MATERIAL

@10%)
= 22.00 sqm
241 12.5 mm thick Gypsum plaster board 170 sqm

@10%)
= 22.00 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
26.47 26.44 Providing and fixing in all exterior face panels breathable vapour barrier
Code underneath the cement fiber board as per National
Description Rate BuildingUnit
Code 2009 complete
MATERIAL
2637 Vapour barrier 180 sqm
10.00 sqm + 1.00 sqm (Add for wastage

@10%)
= 11.00 sqm
LABOUR
For fixing fixing 45 sqm vapour barrier
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1.00 sqm
Say
26.48.1 26.45 Supplying and installation of moisture resistant/ fire resistant cement board as
26.45.1 per standard
Cement Fibersizes
Board fixed
6 mmwith self-drilling
thick as per IS /14862:2000
taping screws. Screws
of type shall
B (High be of
pressure
Code steam cured)
MATERIAL

@10%)
= 11.00 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1.00 sqm
Say
26.48.2 26.45 Supplying and installation of moisture resistant/ fire resistant cement board as
26.45.2 per standard
Cement Bondedsizes fixed with
particle self-drilling
board 8 mm thick/ taping screws.
(Termite, Fire &Screws shall
Moisture be of
Resistance),
Code as per IS:14276 : 1995
MATERIAL

@10%)
= 11.00 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1.00 sqm
Say
26.49 26.46 Providing and fixing in position, 200 mm thick factory made Expanded
Code Polystyrene Core (EPS Core) wall panels consisting
Description Rate of EPSUnit
core sandwiched
Details of cost for 1.20x3.00m= 3.60 sqm
MATERIAL
8013 Factory made EPS Core wallpanel /roof panel s 1650 sqm

@5%)
Total = 3.78 sqm
9999 Add for L-shape,U-shape & straight lap mesh 2.12 L.S.
Cement mortar 1:3 (1cement:3 coarse sand)
2x1.20x3.00x0.05= 0.36 cum
10 mm TMT bars (2 nos.75 mm long)

Aluminium C-channels (100mmx150mm
long)
9999 For fixing wall with foundation 2.12 L.S.
LABOUR
9999 For carrying out shotcreting, shoring, leveling 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.60 sqm
Cost of 1 sqm
Say
26.5 26.47 Providing and fixing in position, 230mm thick factory made Expanded
Code Polystyrene Core (EPS Core) roof/floor panels
Description Ratemade of 3 mm dia G.I. wire mesh
Unit
Details of cost for 1.20x3.00m= 3.60 sqm
MATERIAL
8013 Factory made EPS Core wallpanel /roof panel s 1650 sqm

@5%)
Total = 3.78 sqm
Cement mortar 1:3 (1cement:3 coarse sand)
60mm thick on the bottom of roof slab =1x1.2x3.00x0.060= 0.216cum
70mm thick on the top of roof slab =1x1.20x3.00x0.07= 0.252 cum
5.3 Rate as per Item No.5.3 of SH:REINFOR 10719.35 cum
9999 Add for L-shape, U-shape & straight lap mesh 2.12 L.S.
LABOUR
9999 For providing concreting, shotcreting, shoring, 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.60 sqm
Cost of 1 sqm
Say
26.51 26.48 Providing and fixing of customised Aluminium formwork for monothilic
Code construction on RCC members with repetitive
Description Rateusage made up
Unitof aluminium
Details of cost of 100 sqm (Assuming 100 repetitions)
MATERIALS :
Aluminium formwork & MS working platform

100sqm
@852554=852554 (Total Material cost
marked as 'D' below)
Therefore cost for using once 852554/100 =
8525.54
26.48X Rate as per Item No.26.48X of SH:NEW 856917.75 sqm
Deduct salvage value of aluminium form

work and working
platform with 100 repetitions@30% of bare
26.48Y material cost = 1/100*0.3 = 0.003 2012205 each
9815 Grease to be applied to pins for 100 sqm @ 180 kg
9999 Add for replacement of lost/damaged accesso 2.12 L.S.
9816 Shuttering oil for panels @ 20 Sqm/ltr = 100/20 90 Ltr
9999 Add sundries for gaps filling with sealants etc 2.12 L.S.
9999 Add for PVC sleeve and plastic cover for wall t 2.12 L.S.
LABOUR :
114 Beldar 645 day
Total
26.48Z Rate as per Item No.26.48Z of SH:NEW 16.65 each
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
26.52.1 26.49 Providing and fixing in position factory made EPS cement sandwich
wall/roof/floor
26.49.1 Non light
load bearing weight
panels solid thick
50mm core of
panels made
required of core material of EPS
size
Details of cost for 10 Sqm (6.95 Nos x 0.6 m x 2.40 m = 10 sqm)
MATERIAL
Panel area = 10.00 sqm, Add wastage @ 5% = 0.50 sqm, Total area =
7996 Factory made EPS light weight composite sandw 735.25 sqm
9999 Sundries, wooden wedge for levelling, cement 2.12 L.S.
LABOUR
For fixing, alinging, locking the panels
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
wall/roof/floor
26.49.2 Non light
load bearing weight
panels solid thick
60mm core of
panels made
size
MATERIAL
7997 Factory made EPS light weight composite sandw 845 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
wall/roof/floor
26.49.3 Non light
load bearing weight
panels solid thick
75mm core of
panels made
size
MATERIAL
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
wall/roof/floor
26.49.4 Non light
load bearing weight
panels solid thick
90mm core of
panels made
size
MATERIAL
7999 Factory made EPS light weight composite sandw 1268 sqm
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
wall/roof/floor
26.49.5 Non light
load bearing weight
panels solid core
100mm thickpanels madesize
of required of core material of EPS
MATERIAL
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.53.1 26.5 Providing and fixing in position factory made non asbestos fibre reinforced
aerated
26.50.1 Non loadcement
bearingsandwich wall/roof/floor
panels 50mm light weight
thick of required size solid core panels
(minimum made
4mm thick of
fibre
Code cement board)
MATERIAL
244 Factory made light weight composite non asbes 634 sqm
9999 Sundries, cement based polymer modified joint 2.12 L.S.
LABOUR
For fixing, alinging, locking the panels, glass fibre tape/ fibre mesh wi
114 Beldar 645 day
131 Painter 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.53.2 26.5 Providing and fixing in position factory made non asbestos fibre reinforced
aerated
26.50.2 Non loadcement
bearingsandwich wall/roof/floor
panels 75mm light weight
thick of required size solid core panels
(minimum made
5mm thick of
fibre
Code cement board)
MATERIAL
245 Factory made light weight non asbestos fibre 789 sqm
9999 Sundries, cement based polymer modified joint 2.12 L.S.
LABOUR
For fixing, alinging, locking the panels, glass fibre tape/ fibre mesh wi
114 Beldar 645 day
131 Painter 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.54 26.51 Supplying of standard quality GFRG panel of 124 mm thickness with modular
Code cavities purchased from GFRG panel manufacturing
Description Rate plant inUnit
the country, cut to
MATERIALS
Panel area = 1.00 sqm

Add wastage @ 5% = 0.050sqm
7368 GFRG Panel of 124 mm thick 845 sqm
9999 Transportation of panel in suitable truck (R 2.12 L.S.
9999 Hire Charges for Stillages/Lifting jaw, unloading 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 sqm
Say
26.55 26.52 Erection of GFRG Panels in walls in all floors using suitable crane as per
Code instructions of Engineer-in-Charge, as per Rate
Description cutting drawingsUnit
and structural

(4 walls of 3mx3m = 36 sqm)
LABOUR
Skilled trained crew erection team 4 persons for 4 hour
For 2 Lintels works, 4 skilled men for 2 hrs
Web cutting for horizontal tie beam, 2 skilled men for 4 hrs
Placing horizontal tie beam reinforcement 4 men for 2 hrs
Cost for technical supervisor for 4 hrs (Technical supervisor = Skil
9999 Hire charge for lateral support & Lifting jaws 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 36 sqm
Cost of 1 sqm
Say
26.56 26.53 Filling of empty cavities (as shown in the structural design drawing) with quarry
Code dust mixed with 5% cement (by volume). After
Description Rateinitial infill ofUnit
50 mm thick with
Detail of cost for filling one panel size 9 sqm (3m x 3m Wall)
MATERIAL
Quarry dust filling in cavities of size 230x94 mm
367 Portland Cement (OPC-43 Grade) 5000 tonne
@ 5% volume of quarry dust
Tools and plants hire charges
2 Hire charges of Concrete Mixer 0.25 to 0.40 800 day
LABOUR
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 0.85 cum
Cost of 1 cum
Say
26.57 26.54 Laying of GFRG panel as roof / floor slab panel and staircase panel using
Code suitable crane as per instructions of Engineer-in-Charge,
Description Rate including
Unit providing
Detail of cost for 9 sqm (3mx3m wall panel)
LABOUR
Providing runner & support system in place

for
placing panel in position with 40 mm
bearing on
walls (4 Skilled persons for 1/2 Hrs /1/16
days)
Lifting panel from stack by crane and placing in position with 40
Cutting & removal of top flange to
protruding
25 mm on either sides for keying panel
into RCC micro beams in position (every
3rd cavities runner/span in place beneath)
and providing concealed beam
reinforcement in position, side shuttering
for slab for external side (with 6mm
grove) also to be provided (mean while
providing fan hooks, electrical cabling,
piping etc by coordinate task by concerned
skilled persons, 4 skilled labour for 1 hrs
9999 Hire charges for runner and support system and 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 9 sqm
Cost of 1 sqm
Say
26.58 26.55 Supplying and fixing 10 Gauge weld mesh of size 100mm x100 mm for floor/roof
Code slab concrete screed over the micro beamsRate
Description as reinforcement.
UnitThe weld mesh
Detail of cost for 9 sqm (3m x 3m)
MATERIAL
Mesh area = 9.00 sqm

1223 Steel weld mesh 150 sqm
Labour for filling the quarry dust
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 9 sqm
Cost of 1 sqm
Say
26.59 26.56 Application of ZMB 60/equivalent solution (100 Kg ZMB 60/equivalent, 1 litre ZMB
Code Nano Thinner, 20 litre water & 1 Litre Zycoprime/equivalent
Description Rate = 122 litre/kg) over
Unit
MATERIAL
8516 ZMB 60/equivalent 110 kg
8517 ZMB thinner 220 litre
8518 Zycoprime / equivalent 230 litre
9999 Water, brush,technical supervision etc. 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 122 sqm
Cost of 1 sqm
Say
26.6 26.57 After erection of GFRG wall panels, seal all GFRG wall joints with paper tape
Code temporarily. Water proofing treatment of vertical
Description Rate joints withUnit
Zycosil/equivalent
MATERIAL
8519 Zycosil / equivalent 1800 litre
9999 Water, syringe etc. 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3 metre
Cost of 1 metre
Say
26.61 26.58 Filling of joints between RCC plinth beam / floor slab and wall panel of external
Code walls, toilet / bath room / wet areas walls onRate
Description all floor and parapet
Unit wall over roof
MATERIAL
8520 Elastobar / equivalent 300 kg
9999 100 mesh silica, water, technical supervision e 2.12 L.S.
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 48 metre
Cost of 1 metre
Say
26.62 26.59 Water proofing treatment of Vertical joints (of external side and internal side)
Code between door frame, window & ventilator frames
Description Rate (on all fourUnit
sides) of outer wall
MATERIAL
9999 100 mesh silica,water, technical supervision, e 2.12 L.S.
LABOUR
26.59A Rate as per Item No.26.59A of SH:NEW 0.62 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 48 metre
Cost of 1 metre
Say
26.63 26.6 Water proofing treatment of RCC sunshade with Zycosil/equivalent water
Code proofing Solution (1 litre of Zycosil/equivalent
Description Rate& 20 litres of Unit
water stirred first & 2
MATERIAL
8519 Zycosil / equivalent 1800 litre
LABOUR
131 Painter 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 40 sqm
Cost of 1 sqm
Say
26.64 26.61 In-filling / sealing of joint between RCC lintel cum sunshade and wall (on externa
Code side) in all floors by pushing in Grout RW/equivalent
Description Rate in paste
Unitform and coving 20
MATERIAL
9999 100 mesh silica,water, technical supervision, e 2.12 L.S.
LABOUR
26.59A Rate as per Item No.26.59A of SH:NEW 0.62 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 48 metre
Cost of 1 metre
Say
26.65 26.62 Designing, Providing, installing and fixing factory finished customed design
Code pregalvanized high tensile steel joists manufactured
Description Rate from G350
Unit Z275 confirming
Details of cost for 212.816 kgs
MATERIAL
Covered area = 5.57x4.2m = 23.394 sqm
(a) 250 series Joist (G 350) - 3mm thick

-
Galvanized = 4 Nos x 4.18 metre length =
16.72
metre @ 10.59 kg/metre = 177.06 kg
(b) Joist Shoe plate (E 250) - 12 mm thick
MS
Plate (Galvanized with 55 microns) = 2 Nos
in
each joist x 4 No. joist = 8 No's @ 2.4kg/
each =
19.2kg
(c) Bolts (M16 - Gr 8.8s), (Galvanized) (16ø
X 40 bolts With washer & Nuts)= 6 No's in
each joist x 4 No. joists = 24 Nos
24 No's @ 0.135 kg/ each = 3.24 kg
(d) Hanging Angle at corners to support lock
bars
L 75 x 40 x 1.6 (Galvanized) = 2 x 4.18
metre =8.36 metre @ 1.60 kg/metre =
13.376 kg
Total weight = 177.06+19.2+3.24+13.376
= 212.816 kgs
1012 Pregalvanized high tensile steel confirming to 90 kg
LABOUR (Reference item no. 10.1)
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 212.816 kgs
Cost of 1 kg
Say
26.66 26.63 Providing and fixing special adjustable lockbars of mild steel E-250 to support
Code the temporary plywood for work between joists
Description Rate during construction
Unit as per
Details of cost for 298.75 kgs
MATERIAL
Assuming special adjustable lock bar of

mild
steel will become unserviceable after use of
50
times

material @
35% of cost
Lock bar of size 1230 mm x 75 mm x 10 mm
45 Nos x 4.35 kg/ each = 195.75 kg
Lock bar of size 930 mm x 75 mm x 10 mm
30 Nos x 3.3 kg/ each = 99.00 kg
Total weight = 298.75 kgs
Assuming 50 repetition, Qty taken for cost of
using once = 298.75/50 = 5.975 kgs
Considering salvage value @ 35%,
Quantity =
5.975 x (100-35)/100 = 3.88 kgs
7336 Lock Bar (E 250) - 10 thick MS Plate 76 kg
LABOUR (Reference item no. 10.1)
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 298.75 kgs
Cost of 1 kg
Say
26.67.1 26.64 Centering and shuttering with 12mm thick shuttering plywood confirming to IS
4990:2011 and
26.64.1 Suspended removal
floors, oflandings,
roofs, form at all heights. and
balconies Plywood willplatform.
access be supported on lock
MATERIAL
Assuming 12mm thick plywood will become unserviceable after use of
Area of roof = 13.50 sqm + Add wastage @
5% =
0.675 sqm Total = 14.175 sqm
Qty taken for cost using once = 14.175/10
=
1.4175 sqm
8659 Water proof ply 12 mm thick 525 sqm
confirming to IS 4990:2011
LABOUR (Reference item no. 5.9.20)
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 13.50 sqm
Cost of 1 sqm
Say
26.68 26.65 Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet
Code confirming to IS 277:1992 used as permanent
Description shuttering over
Rate which MS wire
Unit
MATERIAL
Weight of GI sheet for 10 sqm = 76.7 kgs +

Add
wastage @ 3% = 2.3 kg Total = 79.00 kg
8019 GI sheet 0.8 mm thick confirming to IS 277:1 90 kg
Length wire mesh 200 metre/10 sqm, Weight of wire @ 0.06 kg/m, tota
1217 GI Wire mesh 100x100 mm 75 kg
2314 Carriage of sheet & wire 145.72 tonne
1218 Shear stud 50 each
9999 Nails/Tagged screws 2.12 L.S.
9999 Labour for fixing shear stud 2.12 L.S.
Labour for sheeting (Ref item no. 26.19.1)
130 Mistry 784 day
114 Beldar 645 day
Labour for laying wire meah (Ref item no. 5.22.2)
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.69 26.66 Providing and fixing in position, 130 mm thick factory made Expanded
Code Polystyrene Core (EPS Core) wall panels consisting
Description Rate of EPSUnit
core sandwiched
Details of cost for 1.20 x 3.00 m = 3.60 sqm
MATERIAL
Area of EPS panel = 3.60 sqm + Add
wastage
@ 5% Total = 3.78 sqm
8020 Factory made EPS Core wall panel /roof panel 600 sqm
9999 Add for L-shape, U-shape & straight lap mesh 2.12 L.S.
Cement mortar 1:3 (lcement :3 coarse sand)

2 x 1.20 x 3.00 x 0.05 = 0.36 cum
10 mm TMT bars 8 nos of 0.60 metre
long.Total
length = 4.8 m @ 0.617 kg/metre. Total
weight
= 2.96 kg
5.22.6 Rate as per Item No.5.22.6 of SH:REIN 89.65 Kg
9999 Tag screw with washers for wire mesh fixing 2.12 L.S.
9999 For fixing wall with foundation 2.12 L.S.
LABOUR
9999 For carrying out shotcreting, shoring, leveling, 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 3.6 sqm
Cost of 1 sqm
Say
26.7 26.67 Providing and fixing of external thermal insulation and composite system with
Code First layer of self-extinguishing type Expanded
Description Rate PolystyreneUnit
(EPS) insulation
MATERIALS :
Area of insulation board = 10 sqm+ add wastage
@ 10% = 1 sqm. Total = 11.00 sqm
8562 Expanded Polystyrene insulation board 120 mm 825 sqm
1252 Cementitious polymer base adhesive confirm 34 kg
1253 Polypropylene mechanical fastener with pla 30 each
1254 Moisture cure Polyurethane Foam 600 750 ml
1255 PVC Corner Bead of size 25mmx25mm fixed w 90 metre
1256 Cementitious polymer base coat confirming 40 kg
1257 Fiberglass mesh with alkali-resistant coatin 75 sqm
LABOUR :
131 Painter 714 day
114 Beldar 645 day
9999 Trowel, Angle Float, Brushes, sand paper etc. 2.12 L.S.
9999 Sundries (PVC drip bead with glass fibre mesh 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 Sqm.
Cost of 1 Sqm.
Say
26.71.1 26.68 Providing and laying factory made Precast concrete solid blocks of 200 mm
thickness
26.68.1 Cement of grade
mortar 1:6 M10 made :of6 C&D
(1 cement waste
coarse from approved manufacturer in
sand)
MATERIAL
8658 Precast C&D waste concrete block 25150 ### Nos
2201 Carriage of blocks 437.15 ### Nos
LABOUR
115 Coolie 645 day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
26.72.1 26.69 Providing and laying factory made Precast concrete solid blocks of 200 mm
thickness
26.69.1 Cement of grade
mortar 1:6 M10 made :of6 C&D
(1 cement waste
coarse from approved manufacturer in
sand)
MATERIAL
LABOUR
115 Coolie 645 day
101 Bhisti 714 day
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 cum
Say
26.73.1 26.7 Providing and laying half block masonry with factory made Precast concrete
solid blocks
26.70.1 Cement of 100
mortar mm
1:4(1 thickness
cement of grade
: 4 coarse M10 made of C&D waste from
sand)
MATERIAL
Cement mortar 1: 4 (1 cement : 4 coarse sand)
LABOUR
115 Coolie 645 day
101 Bhisti 714 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.74.1 26.71 Providing and laying half block masonry with factory made Precast concrete
solid blocks
26.71.1 Cement of 100
mortar 1:4 (1mm thickness
cement of grade
: 4 coarse M10 made of C&D waste from
sand)
MATERIAL
Cement mortar 1: 4 (1 cement : 4 coarse sand)
LABOUR
115 Coolie 645 day
101 Bhisti 714 day
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.75 26.72 Providing and laying 60mm thick factory made cement concrete paver block of
Code approved shape and colour of M -30 grade Rate
Description made of C&D waste
Unit by block making
MATERIAL
7776 Concrete paver block of grade M-30 made of 295 sqm
Bedding layer = 50mm thick

10 x 0.050 = 0.50 cum
2261 Carriage of Fine sand 163.93 cum
Laying charges (Based on actual observation)
LABOUR
114 Beldar 645 day
115 Coolie 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.76.1.1 26.73 Fabrication & Manufacturing of Prestressed Hollow Core slab (Hollow area 25 to
30%) of different
26.73.1 Concrete thickness
Grade-M-40 & modular
(cement content width
400 kg1200
) mm in Controlled Factory
26.73.1.1100 mm thick hollow core slab
Details of cost of 10.80 cum (120 Rmt)
120 Rmt X 1.20 m X .10 (25 % hollow)
5.33.2.1 Rate as per Item No.5.33.2 of SH:Reinforced 10306.2 cum
Rate as per Item No.5.34.2 of SH:Reinforced

Cement Concrete (M-35 instead of M-25)
(Note : Cement“content considered in M-35
is
5.34.2 @ 350 kg/ cum) 141.55 cum
5.35 Rate as per Item No.5.35 of SH:Reinforced 688.45 quintal
9999 Hollow core bed cost 2.12 L.S.
31 Steam curing by using boiler /Heater 500 cum
9999 Extra cost for preparing zero slump concrete 2.12 L.S.
9999 Cutting, marking, lifting & transportation 2.12 L.S.
5.41.1 Rate as per Item No.5.41.1 of SH:Reinforce 57.5 sqm
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
30%) of different
400 kg1200
Detail cost of 12.96 cum (120 Rmt )
120 Rmt X 1.20 m X 0.12 (25 % hollow)

is
5.34.2 @ 350 kg/ cum) 141.55 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
30%) of different
400 kg1200
120 Rmt X 1.20 m X 0.15 (25 % hollow)

is
5.34.2 @ 350 kg/ cum) 141.55 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
30%) of different
400 kg1200
120 Rmt X 1.20 m X0.20 (30 % hollow)

is
5.34.2 @ 350 kg/ cum) 141.55 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
30%) of different
400 kg1200
120 Rmt X 1.20 m X 0.25 (30 % hollow)

is
5.34.2 @ 350 kg/ cum) 141.55 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
30%) of different
400 kg1200
120 Rmt X 1.20 m X 0.30 (30 % hollow)
is
5.34.2 @ 350 kg/ cum) 141.55 cum
TOTAL
Add 1 % for water charges on all except (A) i.e. on (371739 - 347049
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
30%) of different
400 kg1200
Detail cost of 35.28 cum (120 Rmt)
120 Rmt X 1.20 m X 0.35 (30 % hollow)

is
5.34.2 @ 350 kg/ cum) 141.55 cum
TOTAL
Add 1 % for water charges on all except (A) i.e. on (430267 - 402130
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
30%) of different
400 kg1200
120 Rmt X 1.20 m X 0.40 (30 % hollow)

is
5.34.2 @ 350 kg/ cum) 141.55 cum
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 120 metre
Cost of 1 metre
Say
30%) of
26.73.2 Extra fordifferent thickness
using M-50 & modular
(Cement width
content 425 kg)1200 mm of
instead inM-40
Controlled Factory
26.73.2.1100mm thick hollow core slab
120 Rmt X 1.20 m X .10 (25 % hollow)
Cement for M-50 Mix = 4.590 T

Difference 0.270 T
367 Portland Cement 5000 tonne
2209 Carriage of cement 145.72 tonne
Plasticizer for M-50 Mix = 91.800 Kgs

Difference 5.400 Kgs
7318 Plasticizer / super plasticizer 29 kg
2% of cement content
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X .12 (25 % hollow)
Difference 0.324 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.15 (25 % hollow)

Difference 0.405 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X0.20 (30 % hollow)

Difference 0.504 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.25 (30 % hollow)

Difference 0.630 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.30 (30 % hollow)

Difference 0.756 T
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.35 (30 % hollow)

Difference 0.882 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.40 (30 % hollow)

Difference 1.008 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X .10 (25 % hollow)
Difference 0.432 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X .12 (25 % hollow)

Difference 0.518 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.15 (25 % hollow)

Difference 0.648 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X0.20 (30 % hollow)

Difference 0.806 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.25 (30 % hollow)

Difference 1.008 T
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.30 (30 % hollow)

Difference 1.210 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.35 (30 % hollow)

Difference 1.411 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
30%) of
(Cement width
instead inM-40
Controlled Factory
120 Rmt X 1.20 m X 0.40 (30 % hollow)
Difference 1.613 T

TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 metre
Cost of 1 metre
Say
26.77.1 26.74 Fabrication and manufacturing of solid precast concrete element with provisions
of shear keys,
26.74.1 Concrete gradeconnecting loops,
M-35 (Cement dowel370
content tubes and proper lifting accessories for
kgs)
Detail of cost for 1.26 Cum
Considers a wall 2.80 X 3.00 X 0.15 =

1.260 Cum

is
5.34.2 @ 350 kg/ cum) 141.55 cum
9999 Cost of hosting and fixing moulds 2.12 L.S.
5.9.1 Rate as per Item No.5.9.1 of SH:Reinforced 307.95 sqm
Side Shuttering of walls
((2.8+3)x2x0.15=1.74)
9999 Table buffing & oiling 2.12 L.S.
9999 Sundries (Extra labour for Lifting, transportati 2.12 L.S.
5.41.1 Rate as per Item No.5.41.1 of SH:Reinforced 57.5 sqm
(Curing using curing compound)
7929 Shear loops (6mm dia GI wire rope) (For vertic 210 each
7930 dowel tubes (Corrugated GI pipes 50 to 80mm d 144 metre
9999 Shear key (6mm thick mechanically folded MS 2.12 L.S.
7931 Hooks for lifting (Alloy steel) having 2.5 tonne 270 each
Labour for fixing accessories & inserts

such as shear loops, shear keys,
dowel tubes, lifting hooks
115 Coolie 645 day
Labour for operating of hoisting &

fixing moulds
115 Coolie 645 day
9999 Sundries (Labour cost such as crane, trailer(fl 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.26 Cum
Cost of 1 Cum
Say
of shear
26.74.2 Extra for keys,
usingconnecting loops,
M-40 (Cement dowel
content tubes
400 and proper
kg) instead lifting accessories for
of M-35

Difference 0.030 T
Plasticizer for M-35 Mix =7.400 Kgs

Difference 0.600Kgs
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 Cum
Say
of shear
M-50 (Cement dowel
content tubes
425 and proper
of M-35

Difference 0.055 T

Difference 1.100Kgs
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 Cum
Say
of shear
M-60 (Cement dowel
content tubes
440 and proper
of M-35

Difference 0.070 T

Difference 1.400Kgs
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1.00 Cum
Say
26.78 26.75 Providing & laying in position Prestressing steel strands (low relaxation) on
Code hollow core bed by using mechanical pulling
Description arrangement like
Rate UnitRabbit/ Bed
Considering Four beds
8 strands (each strand is of 9.53mm dia

consisting of 7 wires) X 4 beds X 120
Rmt X 0.453 Unit wt = 1739.52 kgs. Say
1740kgs.
Details of Cost for 1740 Kg
MATERIALS
Quantity = 17.40 quintal + Add wastage
10 % = 1.74 q. Total = 19.14 q
993 FY-1860 grade wire strands 5700 quintal
2205 Carriage of material 145.72 tonne
Cutting baldes required for strand cutting
9999 Strand cutting by cutting saw machine 2.12 L.S.
Wedges
9999 Cost of wedge 2.12 L.S.
Resources - For laying and fixing

cables, anchorages
128 Mate 714 day
115 Coolie 645 day
Labour- For prestressting
128 Mate 714 day
157 Operator 784 day
115 Coolie 645 day
MACHINERY (12 HRS Required to

Lay 1.914 Ton strands on 4 beds)
32 Stressing Machine (jack with pump) 11500 day
28 Hire and running charges of crane 20 tonne c 7000 day
to handle strands (8 Nos. strand coils

( averege weight 3Ton each) required to lay
one bed of 8 strands as one coil can lay only
one strand at a time. Therefore to operate
one complete bed
total 8 Nos strand coils required, hence total
3X8= 24 Ton weight will be handled for one
bed)
34 Cutting saw machine 1350 day
30 Generator 250 KVA 3000 day
35 Strands Roller machinery for laying strands 3500 day
36 Bed master (Pulling strands) 3000 day
28 Hire and running charges of crane 20 tonne c 7000 day
"Crane handling charges for bed master &
stressing machine.“One bed master approx
wt = 03 Ton (to be placed on each bed with
the help of crane for laying of strands )“One
stressing Machine approx wt = 2.5 Ton (to
be placed on each active
ends of bed with the help of crane for initial
pulling & stressing of strands ). Handling &
Shifting of bed master & stressing machine
has to be done for
each bed separately."
1235 Diesel 80.87 litre
(for generator set (14 litres per

hour for 11 hours)
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 1740 kgs
Cost of 1 kg
Say
26.79.1 26.76 Transportation of Precast Elements by flat bed Trailor (Double / Triple axle 40ft
Length
26.76.1 Lead with 15km
within proper accessories like A frame etc) from factory, including the cos
Trailors having capcity 22 MT
Hire charges of truck trailors
Number of trips in working day of 8 hours
N=8/{(2L/S)+2)}. Where L=Lead in Km.,
S=Speed in Km.per hour, 1 hour is
allowed for loading & 1 hour for unloading.
L= 15 km.
S= 15 km / hr
N=8/{(30/15)+2)}=02 Trips / day
9999 Charges of Trailors having capcity 22 MT incl 2.12 L.S.
28 Hire and running charges of crane 30MT for lo 7000 day
128 Mate 714 day
114 Beldar 645 day
9999 wooden battens for tranporatation 2.12 L.S.
9999 Chain for packing & binding precast elements 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 22 MT
Cost of 1 MT
Say
26.79.2 26.76 Transportation of Precast Elements by flat bed Trailor (Double / Triple axle 40ft
Length with proper
26.76.2 Add/Deduct accessories
over item 26.76.1 forlike A frame
every etc) from
additional lead factory,
of 5 km including the cos
Extra for lead 5 km
9999 Charges of Trailors having capcity 22MT inclu 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 22 MT
Cost of 1 MT
Say
26.80.1 26.77 Erection & Installation of Precast/Prestressed Concrete elements in correct &
final positionhollow
26.77.1 Prestressed with proper line level
core Slab up toand
200 plumb at site making all arrangements (i.e
mm thickness
Length of element can be upto 8.00 metres.
Mobile crane (Tyre mounted) upto 25m height 100 feet boom
44 Cost for crane upto 40 tonne capacity 8000 day
9999 Hire charges of props & Misc 2.12 L.S.
Labour cost for erection
130 Mistry 784 day
114 Beldar 645 day
9999 Sundries (Miscellaneous tools and lifting sling 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 150 Sqm
Cost of 1 Sqm
Say
final positionhollow
26.77.2 Prestressed with proper line above
core slab level and
200plumb
mm upatto
site
400making all arrangements (i.e
mm thickness
Length of element can be more than 8.00 metre and upto 14.00 metres
67 Cost for crane upto 80 tonne capacity 15000 day
Labour cost for erection
130 Mistry 784 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 120 Sqm
Cost of 1 Sqm
Say
final position
26.77.3 Solid concretewith
wallproper line level and plumb at site making all arrangements (i.e
elements
Detail of cost for 18 Cum. / Day
Considering volume of different type of elements
wall elements = 15 cum (13 nos)
Beams / portal = 3 cum (02 nos)
Total no of elements = 15 nos
72 Cost for crane having capacity 50 MT duratio 8500 day
9999 Shifting of elements 2.12 L.S.
3 days (3x3 = 9 / pc)
1027 Erection Bolts ( Minimum 04 nos for each ele 25 each
Labour cost
111 Forman 784 day
130 Mistry 784 day
116 rigger 784 day
114 Beldar 645 day
9999 Scaffolding, hire charge of drill machine etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 18 cum
Cost of 1 cum
Say
26.81.1 26.78 Providing & Applying weather proof sealant on outer joints of approved make
confirming
26.78.1 Sealant to IS & directed
25mmx10mm by Engineer-in-charge.
at joints
Detail of material required for = 1.00 metre
8646 Silicon sealant (including 5% wastage) 112 cartrid
9999 Scaffolding, hire charge etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 1 metre
Say
26.82.1 26.79 Providing & Laying of levelling sim pads required sizes (5x5cm to 10x10cm) of
PVC /thick
26.79.1 2mm Rubber to adjust level of bearing surface of supporting members as per
Detail of cost for 100 nos
MATERIAL
246 2mm thick sim pad 10 each
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 Nos
Cost of each
Say
26.79.2 5PVC
mm/ Rubber
thick to adjust level of bearing surface of supporting members as per
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 Nos
Cost of each
Say
PVC
26.79.3 10 mm/ Rubber
thick to adjust level of bearing surface of supporting members as per
MATERIAL
LABOUR
TOTAL
TOTAL
TOTAL
TOTAL
Cost for 100 Nos
Cost of each
Say
26.83.1 26.8 Providing & Grouting of dowel tubes / Shear keys / Joints of precast members
with M-60
26.80.1 Stirrer grade
mixed cementitious
cementitious grout
grout (Non
(non Shrink)
shrink) of approved
of approved make
make by suitable
in dowel tubes /
Code Shear keys / Joints of precast members. Rate
Description Unit
Detail of cost for 250 kgs non shrink

cementitious grout
1251 M-60 grade cemetitious grout (Non Shrink) 28 kg
2209 Carriage of cementitious material 145.72 tonne
9999 Grouting charges of Stirrer mixed cementitious 2.12 L.S.
LABOUR
122 Mason (for plaster of paris work) 1st class 784 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 250 Kgs
Cost of 1 Kg
Say
26.84 26.81 Providing and fixing Scaffolding net of required width made of high density
Code Polyethylene UV stabilized knitted on warpRate
Description knitting machines having density
Unit
MATERIALS:
8761 Scaffolding net made of high density polyethy 22 sqm
Less Salvage value taken 25% on (P)
LABOUR
114 Beldar 645 Day
9999 Sundries for tying the net 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.85 26.82 Providing and laying rigid EPS (cellular plastic material) blocks conforming to
Code ASTM standards/specifications of minimum
Description density 21.60 Kg/cum
Rate Unit on floors,
Details of cost for a Lecture Hall of area 8.40 x 16.00 = 134.40 sqm
Assuming stepped floor for a Lecture Hall having 8 rows and each row
Material
EPS blocks in sizes of = 1.20 x 1.20 x 0.10

m
8.40 m x 12 m x 0.45 m = 45.90 cum
8.40 m x 3 m x 0.15 m = 3.78 cum
49.68 cum say = 50.00 cum
50 cum @ 21.60 Kg/ cum. Total = 1080.00 kgs
9541 EPS blocks in sizes of = 1.20 x 1.20 x 0.10 m 150 kg
GI woven wire mesh of aperture 5.45 mm (with wire of dia 0.90 mm)
9542 GI woven wire mesh of aperture 5.45mm (with 60 kg
Total surface area to be joined 504 sqm considering 1/6th area for ad
9543 SR adhesive for joining EPS blocks 180 kg
9999 Wire pins/ clips to secure IRC mesh to EPS b 2.12 L.S.
9999 T&P Sundries i/c cutting tools etc. 2.12 L.S.
Labour:- For cutting arranging & packing the EPS blocks in position inc
156 Fitter/ Carpenter (average) 749 day
114 Beldar 645 day
Cement concrete 1:2:4 ( 1 cement : 2 cement sand : 4 graded stone cl
4.1.3 Rate as per Item No.4.1.3 of SH:CONCRET 7365.15 cum
12 mm cement plaster 1:4 ( 1 cement : 4 coarse sand)
13.4.1 Rate as per Item No.13.4.1 of SH:FINISHING 307.25 sqm
155 Mason (average) for making burrs 749 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 134.40 sqm
Cost of 1 sqm
Say
26.86 26.83 Applying stamping finish to the top surface of freshly laid plain/reinforced
Code cement concrete of specified grade in porticos,
Description Rate sidewalks, driveways,
Unit pool decks
MATERIAL
9664 Concrete hardener 20 kg
9665 Release Agent 200 litres
9666 Sealer 260 kg
9667 PU resin top coat 225 kg
9999 T&P like tollers of various sizes dewatering ma 2.12 L.S.
Labour for spreading/ sprinkling the floor hardeners, floating, trowelli
166 Specialized Technicians 853 day
124 Assistant/ Operators (Second Class Mason) 714 day
123 Mason 1st class for grouting repairs & applyin 784 day
131 Painter 714 day
114 Beldar 645 Day
9999 Sundries for grouts pigments etc. 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
26.87.1 26.84 Supplying and laying of Uni Axial Woven Polyster Geogrid conforming to MORTH
26.84.1 3100 and Woven
Uni Axial IRC113,polyster
as soil reinforcement /basal reinforcement
geogrid of minimum including
tensile strength 40KN/m in the
Code Longitudinal direction and 20 KN/m in the Rate
Description Transverse direction.
Unit
9668 Uni Axial woven polyster geogrid of minimun te 139 sqm
Add 5% of the cost of reinforcing elements geogrid for wastage and access
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
3100Axial
26.84.2 Uni and IRC113,
Woven as soil reinforcement
polyster /basal reinforcement
Code Longitudinal direction and 20 KN/m in the Transverse
Description Rate direction.
Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.84.3 3100 and Woven
tensile strength 80 KN/m in the
Code Longitudinal
Description direction and 30 KN/m in the Transverse
Rate direction.
Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
3100Axial
26.84.4 Uni and Woven
IRC113,polyster
Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
3100Axial
IRC113,polyster
Code Longitudinal
Rate direction.
Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.84.6 3100 and Woven
Code Longitudinal
Rate direction.
Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
3100Axial
IRC113,polyster
Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
3100Axial
IRC113,polyster
Code Longitudinal
Rate direction.
Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.84.9 3100 and Woven
Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.88.1 26.85 Supplying and laying of Bi-Axial Woven Polyster Geogrid conforming to MORTH
3100
26.85.1 Bi andWoven
Axial IRC113, as soil geogrid
polyster reinforcement /basaltensile
of minimum reinforcement
strengthof granular
20KN/m in road
both
Code Longitudinal and Transverse direction.
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.85.2 3100 andWoven
Bi Axial IRC113, as soil geogrid
strengthof granular
40KN/m in road
both
Code Longitudinal
Description and Transverse direction. Rate Unit
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
3100
26.85.3 Bi andWoven
Axial IRC113, as soil geogrid
strengthof granular
60KN/m in road
both
Code Longitudinal and Transverse direction.
LABOUR
128 Mate 714 day
114 Beldar 645 day
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 300 sqm
Cost of 1 sqm
Say
26.89.1 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer
Composite)
26.86.1 Frame solid
size 45 x 70door/window/Ceosetory
mm windows & other Frames/Chowkhat
Details of cost for door frame/ chowkhat of size 1.00 x 2.10 mtr.
(1.00+2.10+2.10=5.20 mtr.)
MATERIAL
9680 Factory made single extruded WPC (Wood Poly 375 metre
LABOUR
For fabrication and fixing in position
114 Beldar 645 day
9999 Sundries includes PVC solvent cement and SS 2.12 L.S.
TOTAL
TOTAL
TOTAL
TOTAL
Cost of 5.20 mtr.
Cost of 1 mtr.
Say
26.89.2 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer
Composite)
26.86.2 Frame solid
size 45 x 85door/window/Ceosetory
mm windows & other Frames/Chowkhat
Details of cost for door frame/ chowkhat of size 1.00 x 2.10 mtr.
(1.00+2.10+2.10=5.20 mtr.)
MATERIAL
9681 Factory made single extrud

Analaysis 2021 in Excel

Uploaded by

Copyright:

Available Formats

Analaysis 2021 in Excel

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Analaysis 2021 in Excel

Uploaded by

Copyright:

Available Formats

Analysis of Item

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.E Rate of 1 trip for 5 Km Lead (Sub Analysis) 1336.80 Trip

1.1.X Rate of 1 trip for 6 to 10 Km Lead (Sub 98.15 km

1.1.A Rate of 1 trip for 1 Km Lead (Sub Analysis) 878.00 Trip

1.1.B Rate of 1 trip for 2 Km Lead (Sub Analysis) 996.65 Trip

1.1.C Rate of 1 trip for 3 Km Lead (Sub Analysis) 1114.10 Trip

1.1.D Rate of 1 trip for 4 Km Lead (Sub Analysis) 1227.00 Trip