Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    Tec7 Technical Data Sheet

    Uploaded by

    Mohamed Wahdan
    Tec7 is an adhesive that has a unique bonding capacity and adheres to both wet and dry substrates. It has high UV and fungus resistance. It is super strong yet permanently elastic after curing. Tec7 can be used for all applications in construction and sanitary sectors, replacing mounting adhesives, wood adhesives, PU adhesives, silicone sealants and more. It adheres to most substrates and does not attack synthetic materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tec7 Technical Data Sheet

    Uploaded by

    Mohamed Wahdan
    30 views3 pages
    Tec7 is an adhesive that has a unique bonding capacity and adheres to both wet and dry substrates. It has high UV and fungus resistance. It is super strong yet permanently elastic after curing. Tec7 can be used for all applications in construction and sanitary sectors, replacing mounting adhesives, wood adhesives, PU adhesives, silicone sealants and more. It adheres to most substrates and does not attack synthetic materials.

    Original Title

    Tec7-Technical-Data-Sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Tec7 is an adhesive that has a unique bonding capacity and adheres to both wet and dry substrates. It has high UV and fungus resistance. It is super strong yet permanently elastic after curing. Tec7 can be used for all applications in construction and sanitary sectors, replacing mounting adhesives, wood adhesives, PU adhesives, silicone sealants and more. It adheres to most substrates and does not attack synthetic materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views3 pages

    Tec7 Technical Data Sheet

    Uploaded by

    Mohamed Wahdan
    Tec7 is an adhesive that has a unique bonding capacity and adheres to both wet and dry substrates. It has high UV and fungus resistance. It is super strong yet permanently elastic after curing. Tec7 can be used for all applications in construction and sanitary sectors, replacing mounting adhesives, wood adhesives, PU adhesives, silicone sealants and more. It adheres to most substrates and does not attack synthetic materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    TECHNICAL DATA SHEET

    Tec7

    Mount & Seal


    GLUE, MOUNT AND SEAL

    Unique bonding capacity


    Adheres to both wet and dry substrates
    High UV and fungus resistance

    Product
    Technical Info
    Characteristics
    • Flow: 5 bar/ 3 mm/ 23°C 140g/min.
    • After curing, super strong and permanently elastic.
    • Skin formation: 23°C 50% R.V. 8 minutes.
    • Free of phthalates, solvents and isocyanates.
    • Tack-free: 23°C 50% R.V. 25 minutes.
    • Safe on mirrors, no markings on natural stone.
    • Full hardening: 23°C 50% R.V.:
    • Almost odourless.
    24h - 6 mm
    • Even on wet, slippery surfaces.
    48h - 7 mm
    • Fungus and bacteria resistant.
    72h - 8 mm
    • Water and airtight.
    • E-modulus 100%: 172N/cm² /1.72 Mpa.
    • Can be used on most building materials.
    • Electric resistance: 2,6 x 10//BS10//ES Ω/cm.
    • Volume shrinkage after curing: <3%.
    • Hardness - DIN 53505: 60 Shore A. Applications
    • Tensile Strength:
    after 7 days: 260 N/cm² • For all applications: in the construction and sanitary sectors and
    after 1 month: 280 N/cm² general maintenance. Tec7 replaces mounting, wood and PU
    after 3 months: 310 N/cm². adhesive, silicone sealant, sanitary silicone sealant, acrylate
    • Tear strength - DIN 53504: 140N/cm² /1.40 Mpa. adhesive, butyl caulking.
    • The ambient temperature for application: • As a universal adhesive, Tec7 adheres to most substrates and
    between +5°C and +40°C. does not attack synthetic materials.
    • Thermal stability: -40°C to +90°C /peak: 155°C • To mirrors (vertical adhesive beads), natural stone (does not bleed
    max. 30 minutes. through), metal, polyester, polystyrene foam, moist substrates,
    • Elongation at break - Din 53504: > 350%. even under water.
    • Air permeability (according to report 3P02093 of • To seal steel, welded steel and tack welded steel( also stainless
    the SP TRI in Sweden: >0,2m³/m². steel type 316 and 316L), thus preventing rust.
    • Non-toxic. • Overpaintable with most common paints.
    • Water vapour transmission (DIN EN ISO 12572): • Alkyd resin-based lacquer, applied to Tec7, can have a slower
    1,6. drying process.
    • Pressure resistance (ISO 11432): 1,19 N/mm². • Tec7 has lower adhesion on PP, PE, bitumen and silicones.
    • Chemical resistance:
    good: water, seawater, aliphatic solvents, oils,
    greases, diluted organic acids, lyes
    moderate: esters, ketones, aromatics.
    poor: concentrated acids, chlorinated solvents,
    chlorine of swimming pools.
    • Shelf life: 18 months.

    Packing

    Tec7 black - cartridge 310ml 535106000

    Tec7 is a registered trademark of Novatech International nv.|Industrielaan 5B - B-2250 Olen - Belgium|Tel:+32-14-85 97 37 |Fax: + 32-14-85 97 38
    IS0 CERTIFIED COMPANY ISO 9001: 2008 - ISO 14001: 2004 - OHSAS 18001: 2007
    Tec7 white - cartridge 310ml 535206000

    Tec7 brown - cartridge 310ml 535406000

    Mount & Seal


    Tec7 green - cartridge 310ml 535606000

    Tec7 terracotta - cartridge 310ml 535706000

    Tec7 oak - cartridge 310ml 535806000

    Tec7 beige - cartridge 310ml 535906000

    Tec7 grey - cartridge 310ml 535306000

    Tec7 - display sixpack 998015000

    Tec7 box - 4 sixpacks white 998013000

    Tec7 box - 4 sixpacks grey 998014000

    Tec7 grey - sausage 600ml 535308000

    Tec7 white - sausage 600ml 535208000

    Tec7 black - sausage 600ml 535108000

    Tec7 white - tube 50ml blister 535203000

    Tec7 white - tube 100ml 535205000

    Use

    • Processing temperature: from +5°C to +40°C.


    • Apply to clean, dust and grease-free substrate.
    • If necessary clean with Tec7 Cleaner or Multiclean.
    • Apply with manual or air caulking gun (best with telescopic plunger).
    • *Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials. Start by strengthening weak and/or
    porous substrates with Fixprimer.
    • Alkyd resin will harden slowly.
    • Use Tec7 Cleaner to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymers. Use HP Clean
    to finish porous materials.
    When glueing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.
    Ideal adhesive thickness for optimal adhesion strength: 3 mm.

    Tec7 is a registered trademark of Novatech International nv.|Industrielaan 5B - B-2250 Olen - Belgium|Tel:+32-14-85 97 37 |Fax: + 32-14-85 97 38
    IS0 CERTIFIED COMPANY ISO 9001: 2008 - ISO 14001: 2004 - OHSAS 18001: 2007
    Mount & Seal

    Tec7 is a registered trademark of Novatech International nv.|Industrielaan 5B - B-2250 Olen - Belgium|Tel:+32-14-85 97 37 |Fax: + 32-14-85 97 38
    IS0 CERTIFIED COMPANY ISO 9001: 2008 - ISO 14001: 2004 - OHSAS 18001: 2007

    You might also like