CT - AFD.01.eLM - Certification - Test Version 1.3
CT - AFD.01.eLM - Certification - Test Version 1.3
CT - AFD.01.eLM - Certification - Test Version 1.3
eLM.AFD.01 (DeviceNet)
Taking the Certification Test
Each question has only one correct answer. Please record all answers on this answer
sheet. The order of the questions in the test roughly follows the order of topics covered
in class. All questions are equally weighted. A passing score is 90%.
Answer Sheet:
1. 6. 11. 16. 21.
2. 7. 12. 17. 22.
3. 8. 13. 18. 23.
4. 9. 14. 19.
5. 10. 15. 20.
24.
25.
Contact Information:
Name: Title:
Company: Email:
Address:
Phone Number: Fax number:
Supervisor’s Name/ Title:
Test Date:
10. The CAN_L and CAN_H pair of an ODVA certified DeviceNet cable are which
color?
a. Black and Red b. Blue and White
13. Which Yaskawa DeviceNet solution allows for assemblies to be set via
parameter?
a. CM059 c. V7N
b. CM054 d. CM053
18. The Gateway used as part of the GPD506/P5 DeviceNet solution translates
between which two protocols?
a. DeviceNet and Modbus c. DeviceNet and Modbus
RTU Plus
b. DeviceNet and Ethernet d. RS-232 and RS-485
19. When using the DeviceNet master to set the Drive’s speed command it may be
necessary to set the following parameter in the Drive:
a. Reference Source (b1-01 or n004).
b. Frequency Reference Display Units (o1-03 or n035).
c. Frequency Reference Resolution/Unit (n152).
d. All of the above.
22. The network drain/shield wire should never be attached to a Yaskawa DeviceNet
board.
a. True b. False
24. What two options are there for using a V7 Drive on a DeviceNet network?
25. What would the new name for the EDS file for a 480Vac 18 kW F7 that is using a
CM056 board with version 2.11 firmware?