Features Applications

n RoHS compliant* n IEC 61000-4-2 ESD (Min. Level 4)

n Surface Mount SMC package n IEC 61000-4-4 EFT
n Standoff Voltage: 5.0 to 495 volts n IEC 61000-4-5 Surge
n Power Dissipation: 1500 watts

SMCJ Transient Voltage Suppressor Diode Series

General Information Agency Recognition

The markets of portable communications, computing and video equipment are challenging
Description
the semiconductor industry to develop
increasingly smaller electronic components. UL File Number: E153537

Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection
applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage
Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 495 V
and Breakdown Voltage up to 550 V. Typical fast response times are less than
1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional
devices from 0 V to Minimum Breakdown Voltage.

Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick
and place equipment and their flat configuration minimizes roll away.

Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)

Parameter Symbol Value Unit

Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 1500 Watts
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load IFSM 200 Amps
(JEDEC Method) (Note 3)
Steady State Power Dissipation @ TL = 75 °C PM(AV) 5.0 Watts
Maximum Instantaneous Forward Voltage @ IPP = 100 A SMCJ5.0A ~ SMCJ90A 3.5
VF Volts
(For Unidirectional Units Only) SMCJ100A ~ SMCJ495A 5.0

Operating Temperature Range TJ -55 to +150 °C

Storage Temperature Range TSTG -55 to +150 °C
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).

How to Order
SMCJ 5.0 CA - H
Asia-Pacific:
Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Package
SMCJ = SMC/DO-214AB
Europe:
Working Peak Reverse Voltage
Tel: +36 88 885 877 • Email: eurocus@bourns.com 5.0 = 5.0 VRWM (Volts)
The Americas: Suffix
Tel: +1-951 781-5500 • Email: americus@bourns.com A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
www.bourns.com
Reel
(blank) = 13 inch reel
-H = 7 inch reel

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 SMCJ Transient Voltage Suppressor Diode Series

Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)

Maximum Maximum Maximum Maximum

Working Maximum
Clamping Peak Clamping Peak
Unidirectional Breakdown Voltage Peak Reverse
Bidirectional Device Voltage Pulse Voltage Pulse
Device VBR (Volts) Reverse Leakage
@ Ipp Current @ Ipp Current
Voltage @ VRWM
(10/1000 µs) (10/1000 µs) (8/20 µs) (8/20 µs)

@ IT VRWM IR Vc Ipp Vc Ipp

Part No. Marking Part No. Marking Min. Max.
(mA) (V) (μA) (V) (A) (V) (A)
SMCJ5.0A GDE SMCJ5.0CA BDE 6.40 7.00 10 5 800 9.2 163 12 815
SMCJ6.0A GDG SMCJ6.0CA BDG 6.67 7.37 10 6 800 10.3 145.7 13.4 728.5
SMCJ6.5A GDK SMCJ6.5CA BDK 7.22 7.98 10 6.5 500 11.2 134 15 670
SMCJ7.0A GDM SMCJ7.0CA BDM 7.78 8.60 10 7 200 12 125 16 625
SMCJ7.5A GDP SMCJ7.5CA BDP 8.33 9.21 1 7.5 100 12.9 116.3 16.8 581.5
SMCJ8.0A GDR SMCJ8.0CA BDR 8.89 9.83 1 8 50 13.6 110.3 17.7 551.5
SMCJ8.5A GDT SMCJ8.5CA BDT 9.44 10.4 1 8.5 20 14.4 104.2 18.7 521.0
SMCJ9.0A GDV SMCJ9.0CA BDV 10.0 11.1 1 9 10 15.4 97.4 20.0 487.0
SMCJ10A GDX SMCJ10CA BDX 11.1 12.3 1 10 5 17 88.3 22.1 441.5
SMCJ11A GDZ SMCJ11CA BDZ 12.2 13.5 1 11 1 18.2 82.5 23.7 412.5
SMCJ12A GEE SMCJ12CA BEE 13.3 14.7 1 12 1 19.9 75.4 25.9 377.0
SMCJ13A GEG SMCJ13CA BEG 14.4 15.9 1 13 1 21.5 69.8 28.0 349.0
SMCJ14A GEK SMCJ14CA BEK 15.6 17.2 1 14 1 23.2 64.7 30.2 323.5
SMCJ15A GEM SMCJ15CA BEM 16.7 18.5 1 15 1 24.4 61.5 31.7 307.5
SMCJ16A GEP SMCJ16CA BEP 17.8 19.7 1 16 1 26 57.7 33.8 288.5
SMCJ17A GER SMCJ17CA BER 18.9 20.9 1 17 1 27.6 54.4 35.9 272.0
SMCJ18A GET SMCJ18CA BET 20.0 22.1 1 18 1 29.2 51.4 38.0 257.0
SMCJ20A GEV SMCJ20CA BEV 22.2 24.5 1 20 1 32.4 46.3 42.1 231.5
SMCJ22A GEX SMCJ22CA BEX 24.4 26.9 1 22 1 35.5 42.3 46.2 211.5
SMCJ24A GEZ SMCJ24CA BEZ 26.7 29.5 1 24 1 38.9 38.6 50.6 193.0
SMCJ26A GFE SMCJ26CA BFE 28.9 31.9 1 26 1 42.1 35.7 54.7 178.5
SMCJ28A GFG SMCJ28CA BFG 31.1 34.4 1 28 1 45.4 33.1 59.0 165.5
SMCJ30A GFK SMCJ30CA BFK 33.3 36.8 1 30 1 48.4 31 63 155
SMCJ33A GFM SMCJ33CA BFM 36.7 40.6 1 33 1 53.3 28.1 69.3 141.0
SMCJ36A GFP SMCJ36CA BFP 40 44.2 1 36 1 58.1 25.9 75.5 129.5
SMCJ40A GFR SMCJ40CA BFR 44.4 49.1 1 40 1 64.5 23.3 83.9 116.5
SMCJ43A GFT SMCJ43CA BFT 47.8 52.8 1 43 1 69.4 21.7 90.2 108.5
SMCJ45A GFV SMCJ45CA BFV 50 55.3 1 45 1 72.7 20.6 94.5 103.0
SMCJ48A GFX SMCJ48CA BFX 53.3 58.9 1 48 1 77.4 19.4 100.6 97.0
SMCJ51A GFZ SMCJ51CA BFZ 56.7 62.7 1 51 1 82.4 18.2 107.1 91.0
SMCJ54A GGE SMCJ54CA BGE 60 66.3 1 54 1 87.1 17.3 113.2 86.5
SMCJ58A GGG SMCJ58CA BGG 64.4 71.2 1 58 1 93.6 16.1 121.7 80.5
SMCJ60A GGK SMCJ60CA BGK 66.7 73.7 1 60 1 96.8 15.5 125.8 77.5
SMCJ64A GGM SMCJ64CA BGM 71.1 78.6 1 64 1 103 14.6 133.9 73.0
SMCJ70A GGP SMCJ70CA BGP 77.8 86.0 1 70 1 113 13.3 146.9 66.5
SMCJ75A GGR SMCJ75CA BGR 83.3 92.1 1 75 1 121 12.4 157.3 62.0
SMCJ78A GGT SMCJ78CA BGT 86.7 95.8 1 78 1 126 11.9 163.8 59.5
SMCJ85A GGV SMCJ85CA BGV 94.4 104 1 85 1 137 11 178 55
SMCJ90A GGX SMCJ90CA BGX 100 111 1 90 1 146 10.3 189.8 51.5
SMCJ100A GGZ SMCJ100CA BGZ 111 123 1 100 1 162 9.3 210.6 46.5
SMCJ110A GHE SMCJ110CA BHE 122 135 1 110 1 177 8.4 230.1 42.5
SMCJ120A GHG SMCJ120CA BHG 133 147 1 120 1 193 7.9 250.9 39.0
SMCJ130A GHK SMCJ130CA BHK 144 159 1 130 1 209 7.2 271.7 36.0
SMCJ150A GHM SMCJ150CA BHM 167 185 1 150 1 243 6.2 315.9 31.0
SMCJ160A GHP SMCJ160CA BHP 178 197 1 160 1 259 5.8 336.7 29.0
SMCJ170A GHR SMCJ170CA BHR 189 209 1 170 1 275 5.5 357.5 27.5
SMCJ180A GHT SMCJ180CA BHT 201 222 1 180 1 292 5.1 379.6 25.5
SMCJ200A GHV SMCJ200CA BHV 224 247 1 200 1 324 4.6 421.2 23.0
SMCJ220A GHX SMCJ220CA BHX 246 272 1 220 1 356 4.2 462.8 21.0
SMCJ250A GHZ SMCJ250CA BHZ 279 309 1 250 1 405 3.7 526.5 18.5
SMCJ300A GJE SMCJ300CA BJE 335 371 1 300 1 486 3.1 631.8 15.5
SMCJ350A GJG SMCJ350CA BJG 391 432 1 350 1 567 2.6 737.1 13.0
SMCJ400A GJK SMCJ400CA BJK 447 494 1 400 1 648 2.3 842.4 11.5
SMCJ408A 408A SMCJ408CA 408CA 456 504 1 408 1 658 2.3 855.4 11.4
SMCJ440A GJM SMCJ440CA BJM 492 543 1 440 1 713 2.1 926.9 10.5
SMCJ495A 495A SMCJ495CA 495CA 522.5 577.5 1 495 1 760 2.0 988.0 9.9
Notes:
1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double.
2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 SMCJ Transient Voltage Suppressor Diode Series

Product Dimensions Recommended Footprint

A A
A A

B B
B C B

C C

G
D
Dimension SMC (DO-214AB)
4.69
A (Max.)
(0.185)
H FC D 3.07
B (Min.)
E (0.121)
1.52
C (Min.)
F (0.060)
Dimension SMCMM (DO-214AB)
DIMENSIONS:
6.60 - 7.11
(INCHES) MM
A DIMENSIONS:
(0.260 - 0.280) (INCHES)
5.59 - 6.22
B E
(0.220 - 0.245)
2.90 - 3.20 Physical Specifications
C
(0.115 - 0.125)
MM Case............................................Molded plastic per UL Class 94V-0
0.15 - 0.31
DIMENSIONS:
(INCHES)
D Polarity....................... Cathode band indicates unidirectional device
(0.006 - 0.012) No cathode band indicates bidirectional device
7.75 - 8.13 Weight..............................................................................0.21 grams
E
(0.305 - 0.320)
0.05 - 0.202
F
(0.002 - 0.008)
2.00 - 2.62
G
(0.079 - 0.103)
0.76 - 1.52
H
(0.030 - 0.060)

MM
DIMENSIONS:
(INCHES)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 SMCJ Transient Voltage Suppressor Diode Series

Rating & Characteristic Curves

100

Peak Forward Surge Current (Amps)

Pulse Derating Curve Maximum
200 Non-Repetitive Surge Current
Percent of

100
100100

(Amps)
75 200

(Amps)
100100

(Amps)
or Current

100
of ofof

200200

(Amps)
(Amps)
Percent
in of

75 200200
ininPercent

Current
Percent
Currentof

75 75 100

Current
in Percent
Current

Current
Derating
Percent

50 100100
Current

75 75

Current
Current
Current
Power
Current

100100

Surge
Derating
or
in

50

Surge
Derating
or

Surge
50 50
or in
Derating
or or
Power
Pulse
Peak

Surge
25
Derating

Surge
Power

50 50 Pulse Width 8.3 ms

Derating
Power

Forward
Power

Forward
Single Half Sine-Wave
Power

Forward
10 x 1000 Waveform as Defined
Pulse
Peak
Peak

25

Forward
Pulse

Pulse Width
(JEDEC8.3 ms

Forward
Method)
Pulse
Peak

25 25 by R.E.A.
Peak

Pulse Width 8.3 8.3

ms ms
Pulse

10 Single Pulse
Half Width
Sine-Wave
Pulse
Peak

25 2510

Peak
0 x 1000 Waveform as Defined
Peak
Peak

Pulse
Single Width
Half 8.3 ms
Sine-Wave
2PulseHalf
Single Width 8.3
5 ms
Sine-Wave

Peak
100x101000 Waveform50 as Defined 1 10 20 50 100
Peak

(JEDEC Method)

Peak
x 1000
by Waveform as Defined
Peak

25 R.E.A. 75 100 125 150 175 200 Single HalfHalf

Single
(JEDEC Sine-Wave
Sine-Wave
Method)
Peak
10 x101000 Waveform as Defined 10
Peak

by Waveform
R.E.A. (JEDEC Method)

Peak
x 1000 as Defined
Peak

0 by R.E.A. 10 10 (JEDEC Method)Number of Cycles at 60 Hz

00 0 by R.E.A.Ambient Temperature (°C)
25 50by R.E.A.
75 100 125 150 175 200 10 1110 2 5 10 20 50 100
0 0 0 0 25 25 50 50 75 75 100100 125125 150150 175175 200200 1 2 2 5 5 10 10 20 20 50 50 100100
0 0 25 25 50Ambient Temperature
75 75 (°C)
100100 125 150150 175175 200200 1 1 2 2 5Number
5 of
10Cycles at
20
10 at 60 60 Hz
20 Hz 50 50 100100
50
Ambient Temperature 125
(°C)(°C) Number of Cycles
Number of Cycles at 60 Hz
Ambient Temperature Number of Cycles at 60
Ambient Temperature
Ambient (°C)(°C)
Temperature Number of Cycles at Hz
60 Hz

Pulse Waveform Typical Junction Capacitance

TR=10 µs
Peak value (IRSM) 10000
TR=10 µs 100
TR=10 µs µs
TR=10 IRSM
Peak valueHalf value= Unidirectional TA = 25 °C
100 TR=10 µs
TR=10 µs (IRSM) 2
10000
(%)

Peak value
Peak (IRSM)
value (IRSM) 10000
10000
100100 Peak value (IRSM)IRSM 10000
100100 Peak
Half value
value= (IRSM)
IRSM 10000 Unidirectional TA = 25 °C
Current

HalfHalf
value= 2 IRSM Pulse width (TP) Unidirectional TA TA
= 25= °C
(%)

value=
IRSM
2IRSM is defined as that point 1000 Unidirectional 25 °C
(%)(%)

HalfHalf value=2 2
value= Unidirectional TA =TA25= °C
(%)

Unidirectional 25 °C
(pF)

where the (TP)

peak current
Current

2 Pulse
(%)

width Bidirectional
Current
Pulse

decays astowidth
50(TP)
% of IPSM. 1000
Current

50 Pulse
is defined width
Pulse that point
(TP)
Capacitance

1000
Current

(pF)

1000
Current

where Pulse
is definedthewidth
Pulse
is defined peak as(TP)
aswidth
that point
(TP)
current
that point
(pF)

1000
1000 Bidirectional
(pF)

is
where 10
definedthexas1000
peakthat waveform
point
current
Pulse
Peak

50 decays is defined
to 50the%as
where ofthat
peak IPSM.point
current Bidirectional
(pF)
Capacitance

TA=25 °C Bidirectional
(pF)
Pulse

where
decays as
the
to defined
50peak
% by
current
of R.E.A.
IPSM.
IPulse

50 50 where the peak

decays to 50 % of IPSM. current
Capacitance

Bidirectional
Capacitance

100 Bidirectional
Pulse

TP decays to 50 %
50of%IPSM.
Pulse

50 50 10decays
x 1000 towaveform of IPSM.
,

Capacitance
, Peak

Capacitance

TA=25 °C 10 defined
as x101000
x 1000waveform
by R.E.A.
waveform
I,PPeak
, Peak

TA=25 °C
TA=25 °C
TP 10
as x101000
defined waveform
as xdefinedby R.E.A.
1000 waveform
by R.E.A. 100
IP,IPPeak
IP,IPPeak

TA=25 °C °C
TP TP
TA=25 as defined
as defined by R.E.A.
by R.E.A. 100100
0 TP TP 100100
0 1.0 2.0 3.0 4.0
0 0
00 0 T, Time (ms)
1.0 2.0 3.0 4.0 0 10 100 1000
00 00 1.0 1.0 2.0 2.0 3.0 3.0 4.0 4.0 0
0 0 1.0 1.0 T,2.0
Time
2.0(ms) 3.0 3.0 4.0 4.0 00 0 Standoff Voltage (Volts)
T, Time (ms) 10 100 1000
T, Time (ms) 0 0 00 10 10 100100 1000
T, Time
T, Time(ms) (ms) 1000
0 0 10 Standoff
10 Voltage (Volts)
100100 1000
1000
Pulse Rating
100 Curve Steady State6.5 Power Derating
Standoff Curve
Voltage
Standoff (Volts)
Voltage (Volts)
TA = 25 °C 6.0 Standoff Voltage
Standoff (Volts)
Voltage (Volts)
100 Non-repetitive Pulse Waveform 6.5 5.5
100 100 5.0
ShownTA in =Pulse
25 °CWaveform Graph 6.0 6.5
(W)

100100 TA = 25 °C 5.0 6.56.0

5.0
Non-repetitiveTA = 25Waveform
Pulse °C
5.5
RM(AV) Steady State Power Dissipation (W)

TA =
TA 25= Pulse
°C
25 °CWaveform 6.0 4.5
Power Dissipation

10 Shown Non-repetitive
in Pulse Waveform Graph
Power (KW)

5.5
RM(AV) Steady State Power Dissipation (W)
(W) (W)

Non-repetitive
Non-repetitive
Non-repetitive
Shown Pulse
Pulse
in PulsePulse Waveform
Waveform
Waveform Waveform
Graph 4.0 5.0 5.5 4.0
(W)

Shown
Shown in in Pulse
Pulse Waveform
Waveform Graph
Graph 5.0
Dissipation

Shown in Pulse Waveform Graph 4.0 4.5

10
(KW)(KW)

5.0 3.5
Dissipation

10 10 4.0 4.5
PP, Peak(KW)

Dissipation

4.5 3.0
PP, Peak Power (KW)

10 10 3.0 3.5 4.0

(KW)
Power

3.0 4.0 2.5

Power

3.5
PowerPower
State

1.0 3.0
Power

3.5 2.0
Power

Power

3.0
PP, Peak

2.0 2.5
Steady

3.0 1.5
State State

8.0 mm Lead Areas

, Peak

1.0 2.5
2.0 2.0
, Peak

Steady State
PPP, PPeak

1.0 1.0 2.5 1.0

2.0
Steady

1.0 1.0 8.0 mm Lead Areas 1.5

2.0 0.5
5.0 mm
8.0Lead AreasAreas 1.5
PP

mm Lead 1.0 1.0

Steady

0.1 8.0 8.0mmmmLead Areas 1.5 0.0

Lead Areas 1.0 0.5 1.0 60 25
Hz Resistive
100 µs
0.1 µs 1.0 µs
1.0 ms 10 µs
10 ms 1.0 0 50or 75 100 125 150
0.1 0.0 0.5 60 Hz Resistive
Inductive Load or
0.1 0.1 TP, Pulse Width 0.5 T
Inductive - Lead Temperature (°C)
0.1µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0.0 0.0
0 25 50L Load75 100 125 150
0.1 µs0.1 µs 1.0 µs1.0 µs 10 µs10 µs 100 µs100 µs 1.0 ms
0.10.1 1.0 ms 10 ms10 ms 0 0.0 250
0.0 50 25 75 50100 75125 100 150 175
125 200
150
µs µs 1.0 1.0
0.1 0.1 µs µs 10 µs TP,
10 Pulse Width
100 µs 1.0 1.0 ms 10 ms
ms 0 25 T - Lead
50 Temperature
75 100 (°C) 125 175 150200
TP,µs
Pulse 100 µs
Width
TP, Pulse Width
10 ms 0 25 50 L 75
TL, Lead
100
TL Temperature
125
(°C)
- Lead Temperature
150
(°C)
TP, TP,
Pulse Width
Pulse Width TTL,
L -Lead
LeadTemperature
Temperature (°C)(°C)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 SMCJ Transient -Voltage
CDDFN5-0504N Suppressor
TVS/Steering DiodeDiode
ArraySeries
Packaging Information
The product will be dispensed in tape and reel format (see diagram below).

P
0
P E T
1
d Index Hole

120 °
F D2
W
B
D1 D

P A
C
Unidirectional
Trailer Product Device Leader
Orientation

....... ....... ....... ....... W1

End Start
....... ....... ....... ....... MM
DIMENSIONS:
(INCHES)
10 pitches (min.) 10 pitches (min.)

Devices are packed in accordance with EIA standard

Direction of Feed RS-481-A and specifications shown here.

Item Symbol SMC (DO-214AB)

7 Inch Reel 13 Inch Reel
6.0 ± 2.0
Carrier Width A
(0.236 - 0.079)
8.3 ± 0.20
Carrier Length B
(0.327 ± 0.008)
2.5 ± 0.20
Carrier Depth C
(0.098 ± 0.008)
1.50 ± 0.10
Sprocket Hole d
(0.059 ± 0.004)
178 330
Reel Outside Diameter D
(7.008) (12.992)
50.0
Reel Inner Diameter D1 MIN.
(1.969)
13.0 +0.50/-0.20
Feed Hole Diameter D2
(0.512 +0.020/-0.008)
1.75 ± 0.10
Sprocket Hole Position E
(0.069 ± 0.004)
7.50 ± 0.10
Punch Hole Position F
(0.295 ± 0.004)
8.00 ± 0.10
Punch Hole Pitch P
(0.315 ± 0.004)
4.00 ± 0.10
Sprocket Hole Pitch P0
(0.157 ± 0.004)
2.00 ± 0.10
Embossment Center P1
(0.079 ± 0.004)
0.30 ± 0.10
Overall Tape Thickness T
(0.012 ± 0.004)
16.00 ± 0.30
Tape Width W
(0.630 ± 0.012)
22.4
Reel Width W1 MAX.
(0.882)
Quantity per Reel -- 500 3,000

REV. 03/20
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.

Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.

Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.

Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.

Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.

The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.

To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Bourns:
SMCJ9.0A SMCJ90A SMCJ10A SMCJ100A SMCJ11A SMCJ110A SMCJ12A SMCJ120A SMCJ13A
SMCJ130A SMCJ14A SMCJ15A SMCJ150A SMCJ16A SMCJ160A SMCJ17A SMCJ170A SMCJ18A SMCJ20A
SMCJ22A SMCJ24A SMCJ26A SMCJ28A SMCJ30A SMCJ33A SMCJ36A SMCJ40A SMCJ43A SMCJ45A
SMCJ48A SMCJ51A SMCJ5.0A SMCJ6.0A SMCJ54A SMCJ58A SMCJ60A SMCJ6.5A SMCJ7.0A SMCJ64A
SMCJ70A SMCJ7.5A SMCJ8.0A SMCJ75A SMCJ78A SMCJ8.5A SMCJ85A SMCJ100CA SMCJ10CA
SMCJ110CA SMCJ11CA SMCJ120CA SMCJ12CA SMCJ130CA SMCJ13CA SMCJ14CA SMCJ150CA
SMCJ15CA SMCJ160CA SMCJ16CA SMCJ170CA SMCJ17CA SMCJ18CA SMCJ20CA SMCJ22CA SMCJ24CA
SMCJ26CA SMCJ28CA SMCJ30CA SMCJ33CA SMCJ36CA SMCJ40CA SMCJ43CA SMCJ45CA SMCJ48CA
SMCJ5.0CA SMCJ51CA SMCJ54CA SMCJ58CA SMCJ6.0CA SMCJ6.5CA SMCJ60CA SMCJ64CA SMCJ7.0CA
SMCJ7.5CA SMCJ70CA SMCJ75CA SMCJ78CA SMCJ8.0CA SMCJ8.5CA SMCJ85CA SMCJ9.0CA
SMCJ90CA SMCJ408CA SMCJ495A SMCJ495CA SMCJ408A SMCJ440A SMCJ180CA SMCJ220A SMCJ400CA