ACE User Manual Compressed
ACE User Manual Compressed
ACE User Manual Compressed
Installation Guide
Manufactured By
NEX DIGITRONIX LLP, Hinjewadi, Pune, MH, INDIA
Customer Care
Whatsapp/Call: 7737373626
Email-support@nexdigitron.com
Please Read Carefully Before Use
Dash Cam
Function Description
Storage Abnormal/
Blue LED is Solid ON
Not Recording
1. Clean an area on the windshield where you wish the Dash Cam to be
installed, this assists in better adhesion.
2. Remove the protective film from the back of the bracket, attach the
adhesive side of the mount on the windshiel whereit has an unobstructed
view of the road but does not interfere with the driver's view. As shown
below.
3. Use the installation tool to lift the edges of the windshield/molding and
tuck in the power cable. Connect the Dashcam to the provided 5V power
cable.
4. Insert memory card and turn on the engine after installation, you will
hear a boot tone. The Dashcam powers up and starts recording,
meanwhile, BLUE indicator will blink slowly in normal recording mode.
5. The RED LED indicates Wi-Fi status. Solid means it is not connected to
any smartphone and when the dashcam is connected to any smartphone,
it flashes slowly. Dashcam can be connected to only one startphone at
one time.
Model : ACE
Processor : Novatek NT96562
Input Power : 5V 1.0A
WiFi : Built-in 2.4GHz WiFi
Resolution : Full HD 1080p with F1.8 Aperture
Lens : 140° FOV, F1.8 Aperture, 6-Glass Lens
G-Sensor : Built-in 3-axis gyro, emergency lock, adjustable sensitivity via App
Storage : Micro SD card storage, max. 128GB, loop recording
Contact Us