SAFETY DATA SHEET

LYCOMING LW-16702 ENGINE OIL ADDITIVE

Page: 1
Compilation date: 27 May 2015
Revision date: 05 July 2017
Revision No: 2

Section 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product name: LYCOMING LW-16702 ENGINE OIL ADDITIVE

Synonyms: ENGINE OIL ADDITIVE
1.2. Relevant identified uses of the substance or mixture and uses advised against

Use of substance / mixture: PC24: Lubricants, greases, release products.

1.3. Details of the supplier of the safety data sheet

Company name: Andpak, Inc

400 Jarvis Dr.
Morgan Hill
CA
95037
Tel: (408)782-2500
Fax: (408)782-6304
Email: 4info@andpak.com
1.4. Emergency telephone number

Emergency tel: (800)424-9300

Section 2: Hazards identification

2.1. Classification of the substance or mixture

Classification under CLP: Aquatic Acute 1: H400; Aquatic Chronic 1: H410; Repr. 2: H361fd
Most important adverse effects: Suspected of damaging fertility. Suspected of damaging the unborn child. Very toxic to
aquatic life. Very toxic to aquatic life with long lasting effects.
2.2. Label elements

Label elements:
Hazard statements: H361fd: Suspected of damaging fertility. Suspected of damaging the unborn child.
H400: Very toxic to aquatic life.
H410: Very toxic to aquatic life with long lasting effects.
Hazard pictograms: GHS08: Health hazard
GHS09: Environmental

[cont...]
 SAFETY DATA SHEET
LYCOMING LW-16702 ENGINE OIL ADDITIVE
Page: 2
Signal words: Warning
Precautionary statements: P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P273: Avoid release to the environment.
P281: Use personal protective equipment as required.
P308+313: IF exposed or concerned: Get medical attention.
P391: Collect spillage.
2.3. Other hazards

Other hazards: Danger of serious damage to health by prolonged exposure.

PBT: This product is not identified as a PBT/vPvB substance.

Section 3: Composition/information on ingredients

3.1. Substances

Chemical identity: TRIS(METHYLPHENYL) PHOSPHATE

Section 4: First aid measures

4.1. Description of first aid measures

Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin.
Drench the affected skin with running water for 10 minutes or longer if substance is still
on skin. Consult a doctor.
Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor.
Ingestion: Wash out mouth with water. Consult a doctor.
Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. Consult a
doctor.
4.2. Most important symptoms and effects, both acute and delayed

Skin contact: No symptoms.

Eye contact: No symptoms.
Ingestion: There may be irritation of the throat.
Inhalation: No symptoms.
4.3. Indication of any immediate medical attention and special treatment needed

Section 5: Fire-fighting measures

5.1. Extinguishing media

Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray
to cool containers.
5.2. Special hazards arising from the substance or mixture

Exposure hazards: In combustion emits toxic fumes.

[cont...]
 SAFETY DATA SHEET
LYCOMING LW-16702 ENGINE OIL ADDITIVE
Page: 3
5.3. Advice for fire-fighters

Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact
with skin and eyes.

Section 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Personal precautions: Refer to section 8 of SDS for personal protection details. Turn leaking containers leak-
side up to prevent the escape of liquid. Mark out the contaminated area with signs and
prevent access to unauthorised personnel. Evacuate the area immediately.
6.2. Environmental precautions

Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding. Alert the
neighbourhood to the presence of fumes or gas.
6.3. Methods and material for containment and cleaning up

Clean-up procedures: Absorb into dry earth or sand. Clean-up should be dealt with only by qualified personnel
familiar with the specific substance.
6.4. Reference to other sections

Section 7: Handling and storage

7.1. Precautions for safe handling

Handling requirements: Ensure there is sufficient ventilation of the area.

7.2. Conditions for safe storage, including any incompatibilities

Storage conditions: Store in a cool, well ventilated area. Keep container tightly closed. The floor of the
storage room must be impermeable to prevent the escape of liquids.
Suitable packaging: Must only be kept in original packaging.
7.3. Specific end use(s)

Section 8: Exposure controls/personal protection

8.1. Control parameters

Workplace exposure limits: No data available.

DNEL/PNEC Values

DNEL / PNEC No data available.

8.2. Exposure controls

Engineering measures: The floor of the storage room must be impermeable to prevent the escape of liquids.
Ensure there is sufficient ventilation of the area.
Respiratory protection: Self-contained breathing apparatus must be available in case of emergency.

[cont...]
 SAFETY DATA SHEET
LYCOMING LW-16702 ENGINE OIL ADDITIVE
Page: 4
Hand protection: Impermeable gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Impermeable protective clothing.

Section 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties

State: Liquid
Colour: Colourless
Odour: Odourless
Evaporation rate: No data available.
Oxidising: Non-oxidising (by EC criteria)
Solubility in water: Insoluble
Boiling point/range°C: 241-255 Melting point/range°C: -40
Flammability limits %: lower: No data available. upper: No data available.
Flash point°C: 225 Part.coeff. n-octanol/water: 5.93
Autoflammability°C: 607 Vapour pressure: 2.8 hPa
Relative density: 1.17 pH: No data available.
VOC g/l: No data available.
9.2. Other information

Other information: No data available.

Section 10: Stability and reactivity

10.1. Reactivity

Reactivity: Stable under recommended transport or storage conditions.

10.2. Chemical stability

Chemical stability: Stable under normal conditions.

10.3. Possibility of hazardous reactions

Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
10.4. Conditions to avoid

Conditions to avoid: Heat. Hot surfaces. Flames.

10.5. Incompatible materials

10.6. Hazardous decomposition products

Haz. decomp. products: In combustion emits toxic fumes of carbon dioxide / carbon monoxide. In combustion
emits toxic fumes.

[cont...]
 SAFETY DATA SHEET
LYCOMING LW-16702 ENGINE OIL ADDITIVE
Page: 5

Section 11: Toxicological information

11.1. Information on toxicological effects

Toxicity values:
Route Species Test Value Units
ORAL RAT LD50 >5001 mg/kg
VAPOURS RAT 4H LC50 >5.2 mg/l
DERMAL RBT LD50 >10000 mg/kg

Relevant hazards for product:

Hazard Route Basis
Reproductive toxicity -- Hazardous: calculated

Symptoms / routes of exposure

Skin contact: No symptoms.

Eye contact: No symptoms.
Ingestion: There may be irritation of the throat.
Inhalation: No symptoms.

Section 12: Ecological information

12.1. Toxicity

Ecotoxicity values: No data available.

12.2. Persistence and degradability

Persistence and degradability: Not biodegradable.

12.3. Bioaccumulative potential

Bioaccumulative potential: Bioaccumulation potential.

12.4. Mobility in soil

Mobility: Readily absorbed into soil.

12.5. Results of PBT and vPvB assessment

PBT identification: This product is not identified as a PBT/vPvB substance.

12.6. Other adverse effects

Other adverse effects: Toxic to aquatic organisms. Toxic to soil organisms.

Section 13: Disposal considerations

13.1. Waste treatment methods

Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal
company.
[cont...]
 SAFETY DATA SHEET
LYCOMING LW-16702 ENGINE OIL ADDITIVE
Page: 6
Recovery operations: Use principally as a fuel or other means to generate energy. Solvent
reclamation/regeneration.
NB: The user's attention is drawn to the possible existence of regional or national
regulations regarding disposal.

Section 14: Transport information

14.1. UN number

UN number: UN3082
14.2. UN proper shipping name

Shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

((tris(methylphenyl) phosphate)
14.3. Transport hazard class(es)

Transport class: 9
14.4. Packing group

Packing group: III

14.5. Environmental hazards

Environmentally hazardous: Yes Marine pollutant: No

14.6. Special precautions for user

Tunnel code: E
Transport category: 3

Section 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

Specific regulations: Not applicable.

15.2. Chemical Safety Assessment

Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture
by the supplier.

Section 16: Other information

Other information

Other information: This safety data sheet is prepared in accordance with Commission Regulation (EU) No
2015/830.
* indicates text in the SDS which has changed since the last revision.
Classification complies with OSHA Hazard Communication Standard (29 CFR
1910.1200) and is consistent with the provisions of the United Nations Globally
Harmonized System of Classification and Labeling of Chemicals (GHS).
The components of this product are listed in the TSCA inventory.
[cont...]
 SAFETY DATA SHEET
LYCOMING LW-16702 ENGINE OIL ADDITIVE
Page: 7
Phrases used in s.2 and s.3: H361fd: Suspected of damaging fertility. Suspected of damaging the unborn child.
H400: Very toxic to aquatic life.
H410: Very toxic to aquatic life with long lasting effects.
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive
and shall be used only as a guide. This company shall not be held liable for any
damage resulting from handling or from contact with the above product.

[final page]