3 11CH11
3 11CH11
3 11CH11
CHAPTER 11
SYSTEMS1
FOREWORD
(UNDER DEVELOPMENT)
NOTE: This chapter is being developed by Committee 11, which was formed in 1998. Additional material will
appear in future Manual Revisions.
TABLE OF CONTENTS 3
Part/Section Description Page
1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1-1
1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1-1
1.2 Safety/Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1-2
1
The material in this and other chapters in the AREMA Manual for Railway Engineering is published as recommended practice to railroads and others
concerned with the engineering, design and construction of railroad fixed properties (except signals and communications), and allied services and facilities.
For the purpose of this Manual, RECOMMENDED PRACTICE is defined as a material, device, design, plan, specification, principle or practice
recommended to the railways for use as required, either exactly as presented or with such modifications as may be necessary or desirable to meet the needs
of individual railways, but in either event, with a view to promoting efficiency and economy in the location, construction, operation or maintenance of
railways. It is not intended to imply that other practices may not be equally acceptable.
The chapters of the AREMA Manual are divided into numbered Parts, each comprised of related documents (specifications,
recommended practices, plans, etc.). Individual Parts are divided into Sections by centered headings set in capital letters and
identified by a Section number. These Sections are subdivided into Articles designated by numbered side headings.
Page Numbers – In the page numbering of the Manual (11-2-1, for example) the first numeral designates the Chapter
number, the second denotes the Part number in the Chapter, and the third numeral designates the page number in the Part.
Thus, 11-2-1 means Chapter 11, Part 2, page 1.
In the Glossary and References, the Part number is replaced by either a “G” for Glossary or “R” for References.
Document Dates – The bold type date (Document Date) at the beginning of each document (Part) applies to the document
as a whole and designates the year in which revisions were last made somewhere in the document, unless an attached footnote
indicates that the document was adopted, reapproved, or rewritten in that year.
Article Dates – Each Article shows the date (in parenthesis) of the last time that Article was modified.
Revision Marks – All current year revisions (changes and additions) which have been incorporated into the document are
identified by a vertical line along the outside margin of the page, directly beside the modified information.
Proceedings Footnote – The Proceedings footnote on the first page of each document gives references to all Association
action with respect to the document.
1
Annual Updates – New manuals, as well as revision sets, will be printed and issued yearly.