Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 177 views

    Datasheet

    Uploaded by

    Diode Capacitor
    UNISONIC TECHNOLOGIES CO., LTD MCR100 SENSITIVE gate SILICON CONTROLLED RECTIFIERS REVERSE Blocking thyristors. PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors. Blocking voltage to 600V On-state current rating of 0.8A RMS at 80degC high surge current capability -

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Datasheet

    Uploaded by

    Diode Capacitor
    177 views6 pages
    UNISONIC TECHNOLOGIES CO., LTD MCR100 SENSITIVE gate SILICON CONTROLLED RECTIFIERS REVERSE Blocking thyristors. PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors. Blocking voltage to 600V On-state current rating of 0.8A RMS at 80degC high surge current capability -

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    UNISONIC TECHNOLOGIES CO., LTD MCR100 SENSITIVE gate SILICON CONTROLLED RECTIFIERS REVERSE Blocking thyristors. PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors. Blocking voltage to 600V On-state current rating of 0.8A RMS at 80degC high surge current capability -

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    177 views6 pages

    Datasheet

    Uploaded by

    Diode Capacitor
    UNISONIC TECHNOLOGIES CO., LTD MCR100 SENSITIVE gate SILICON CONTROLLED RECTIFIERS REVERSE Blocking thyristors. PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors. Blocking voltage to 600V On-state current rating of 0.8A RMS at 80degC high surge current capability -

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 6

    UNISONIC TECHNOLOGIES CO.

    , LTD MCR100
    SENSITIVE GATE SILICON CONTROLLED RECTIFIERS REVERSE BLOCKING THYRISTORS
    DESCRIPTION
    PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits.
    1 3 2 1

    SCR

    SOT-89

    SOT-23

    TO-92

    FEATURES
    * Sensitive gate allows triggering by micro controllers and other logic circuits * Blocking voltage to 600V * On-state current rating of 0.8A RMS at 80C * High surge current capability 10A * Minimum and maximum values of IGT, VGT and IH specified for ease of design * Immunity to dV/dt 20V/sec minimum at 110C * Glass-passivated surface for reliability and uniformity Lead-free: MCR100L Halogen-free:MCR100GG

    ORDERING INFORMATION
    Ordering Number Normal Lead Free Plating MCR100-4-x-AB3-R MCR100L-4-x-AB3-R MCR100-4-x-AE3-R MCR100L-4-x-AE3-R MCR100-4-x-T92-B MCR100L-4-x-T92-B MCR100-4-x-T92-K MCR100L-4-x-T92-K MCR100-6-x-AB3-R MCR100L-6-x-AB3-R MCR100-6-x-AE3-R MCR100L-6-x-AE3-R MCR100-6-x-T92-B MCR100L-6-x-T92-B MCR100-6-x-T92-K MCR100L-6-x-T92-K MCR100-8-x-AB3-R MCR100L-8-x-AB3-R MCR100-8-x-AE3-R MCR100L-8-x-AE3-R MCR100-8-x-T92-B MCR100L-8-x-T92-B MCR100-8-x-T92-K MCR100L-8-x-T92-K Note: Pin assignment: G: Gate K: Cathode MCR100L-4-x-AB3-R (1) Packing Type (2) Package Type (3) Rank (4) Lead Plating (1) B: Tape Box, K: Bulk, R: Tape Reel (2) AB3: SOT-89, AE3: SOT-23, T92: TO-92 (3) x: Refer to CLASSIFICATION OF IGT (4) G: Halogen Free, L: Lead Free, Blank: Pb/Sn Halogen Free MCR100G-4-x-AB3-R MCR100G-4-x-AE3-R MCR100G-4-x-T92-B MCR100G-4-x-T92-K MCR100G-6-x-AB3-R MCR100G-6-x-AE3-R MCR100G-6-x-T92-B MCR100G-6-x-T92-K MCR100G-8-x-AB3-R MCR100G-8-x-AE3-R MCR100G-8-x-T92-B MCR100G-8-x-T92-K A: Anode Package SOT-89 SOT-23 TO-92 TO-92 SOT-89 SOT-23 TO-92 TO-92 SOT-89 SOT-23 TO-92 TO-92 Pin assignment 1 2 3 G A K G K A K G A K G A G A K G K A K G A K G A G A K G K A K G A K G A Packing Tape Reel Tape Reel Tape Box Bulk Tape Reel Tape Reel Tape Box Bulk Tape Reel Tape Reel Tape Box Bulk

    www.unisonic.com.tw Copyright 2009 Unisonic Technologies Co., Ltd

    1 of 6
    QW-R301-016.C

    MCR100
    MARKING FOR SOT-23
    MCR100-4 MCR100-6 MCR100-8

    SCR

    R4

    L: Lead Free G: Halogen Free

    R6

    L: Lead Free G: Halogen Free

    R8

    L: Lead Free G: Halogen Free

    UNISONIC TECHNOLOGIES CO., LTD


    www.unisonic.com.tw

    2 of 6
    QW-R301-016.C

    UNISONIC TECHNOLOGIES CO., LTD MCR100


    ABSOLUTE MAXIMUM RATINGS
    PARAMETER Peak Repetitive Off-State Voltage(Note 1) (TJ=-40 ~ 110, Sine Wave, 50 ~ 60Hz; Gate Open) SYMBOL MCR100-4 VDRM,VRRM MCR100-6 MCR100-8 On-Sate RMS Current (Tc=80) 180 Condition Angles IT(RMS) Peak Non-Repetitive Surge Current ITSM 10 A (1/2 cycle, Sine Wave, 60Hz, TJ=25) 2 Circuit Fusing Considerations (t=8.3 ms) It 0.415 A2s Forward Peak Gate Power (TA=25, Pulse Width 1.0s) PGM 0.1 W Forward Average Gate Power (TA=25, t=8.3ms) PG(AV) 0.1 W Peak Gate Current Forward (TA=25, Pulse Width1.0s) IGM 1 A Peak Gate Voltage Reverse (TA=25, Pulse Width1.0s) VGRM 5 V Operating Junction Temperature Range TJ -40 ~ +110 (Rated VRRM and VDRM) Storage Temperature Range TSTG -40 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RATINGS 200 400 600 0.8 UNIT V V V A

    SCR

    THERMAL DATA
    PARAMETER Junction to Ambient TO-92 SOT-23/SOT-89 SYMBOL JA MAX 200 400 UNIT /W /W

    ELECTRICAL CHARACTERISTICS (TJ=25, unless otherwise stated)


    PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT OFF CHARACTERISTICS Peak Forward or Reverse Blocking TC=25 VD=Rated VDRM and VRRM; 10 A IDRM, IRRM Current RGK=1k TC=125 100 A ON CHARACTERISTICS Peak Forward On-State Voltage (Note 2) VTM ITM=1A Peak @ TA=25 1.7 V Gate Trigger Current (Continuous DC)(Note3) IGT VAK=7Vdc, RL=100, TC=25 40 200 A VAK=7Vdc, initiating TC=25 0.5 5 mA Holding Current (Note 4) IH current=20mA 10 mA TC=-40 TC=25 0.6 10 mA IL Latch Current VAK=7V, Ig=200A TC=-40 15 mA Gate Trigger Voltage (continuous TC=25 0.62 0.8 V VGT VAK=7Vdc, RL=100 dc) (Note 3) TC=-40 1.2 V DYNAMIC CHARACTERISTICS VD=Rated VDRM, Exponential Critical Rate of Rise of Off-State Voltage dV/dt Waveform, RGK=1000, 20 35 V/s TJ=110 IPK=20A; Pw=10sec; 50 A/s Critical Rate of Rise of On-State Current di/dt diG/dt=1A/sec, Igt=20mA Notes: 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. Indicates Pulse Test Width1.0ms, duty cycle 1% 3. RGK=1000 included in measurement. 4. Does not include RGK in measurement

    www.unisonic.com.tw Copyright 2009 Unisonic Technologies Co., Ltd

    3 of 6
    QW-R301-016.C

    UNISONIC TECHNOLOGIES CO., LTD MCR100


    VOLTAGE CURRENT CHARACTERISTIC OF SCR
    PARAMETER Peak Repetitive Off Stat Forward Voltage Peak Forward Blocking Current Peak Repetitive Off State Reverse Voltage Peak Reverse Blocking Current Peak On State Voltage Holding Current +Current SYMBOL VDRM IDRM VRRM IRRM VTM IH Anode+ VTM On State IRRM at VRRM IH

    SCR

    Reverse Blocking Region (off state) Reverse Avalanche Region Anode-

    +Voltage IDRM at VDRM Forward Blocking Region (off state)

    CLASSIFICATION OF IGT
    RANK RANGE B 48~105A C 95~200A AA 8~16A AB 14~21A AC 19~25A AD 23~52A

    www.unisonic.com.tw Copyright 2009 Unisonic Technologies Co., Ltd

    4 of 6
    QW-R301-016.C

    MCR100
    TYPICAL CHARACTERISTICS
    Typical Gate Trigger Current vs. Junction Temperature 100 90 Gate Trigger Current (A) Gate Trigger Voltage (V) 80 70 60 50 40 30 20 10 -40 -25 -10 5 20 35 50 65 80 95 110 Junction Temperature, TJ () 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 -40 -25 -10 5 20 35 50 65 80 95 110 Junction Temperature, TJ () Typical Gate Trigger Voltage vs. Junction Temperature

    SCR

    Typical RMS Curent Derating 120 110 100 90 80 70 60 50 40 0 120 30 60 90 0.1 0.2 0.3 0.5 0.4 RMS On-State Current, IT(RMS) (A) 180 1 10

    Typical On-State Characteristics MAXIMUM@T J=25

    MAXIMUM@TJ=110

    0.1 0.5 0.8 1.11.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Instantaneous On-State Voltage, VT (V)

    UNISONIC TECHNOLOGIES CO., LTD


    www.unisonic.com.tw

    5 of 6
    QW-R301-016.C

    MCR100

    SCR

    UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.

    UNISONIC TECHNOLOGIES CO., LTD


    www.unisonic.com.tw

    6 of 6
    QW-R301-016.C

    You might also like