Safety Data Sheet

According to Regulation (EC) No 1907/2006

Clearklens Flow VH20

Revision: 2018-01-25 Version: 03.1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier
Trade name: Clearklens Flow VH20

1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses:
For professional and industrial use only.
AISE-P801 - Food process cleaner. Cleaning In place (CIP) process
Uses advised against: Uses other than those identified are not recommended

1.3 Details of the supplier of the safety data sheet

Diversey Europe Operations BV, Maarssenbroeksedijk 2, 3542DN Utrecht, The Netherlands

Contact details
Diversey Ltd
Weston Favell Centre, Northampton NN3 8PD, United Kingdom
Tel: 01604 405311, Fax: 01604 406809
Regulatory Email: customerservice.uk@diversey.com

1.4 Emergency telephone number

For medical or environmental emergency only:
call 0800 052 0185

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Skin Corr. 1A (H314)
Met. Corr. 1 (H290)

2.2 Label elements

Signal word: Danger.

Contains sodium hydroxide (Sodium Hydroxide).

Hazard statements:
H314 - Causes severe skin burns and eye damage.
H290 - May be corrosive to metals.

Precautionary statements:
P260 - Do not breathe spray.
P280 - Wear protective gloves, protective clothing and eye or face protection.
P303 + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P310 - Immediately call a POISON CENTRE, doctor or physician.

2.3 Other hazards

No other hazards known
The product does not meet the criteria for PBT or vPvB in accordance with Regulation (EC) No 1907/2006, Annex XIII

SECTION 3: Composition/information on ingredients

3.2 Mixtures

Page 1 / 10
 Safety Data Sheet
Clearklens Flow VH20

Ingredient(s) EC number CAS number REACH number Classification Notes Weight

percent
sodium hydroxide 215-185-5 1310-73-2 01-2119457892-27 Skin Corr. 1A (H314) 30-50
Met. Corr. 1 (H290)
* Polymer.
Workplace exposure limit(s), if available, are listed in subsection 8.1.
[1] Exempted: ionic mixture. See Regulation (EC) No 1907/2006, Annex V, paragraph 3 and 4. This salt is potentially present, based on calculation, and included
for classification and labelling purposes only. Each starting material of the ionic mixture is registered, as required.
[2] Exempted: included in Annex IV of Regulation (EC) No 1907/2006.
[3] Exempted: Annex V of Regulation (EC) No 1907/2006.
[4] Exempted: polymer. See Article 2(9) of Regulation (EC) No 1907/2006.
For the full text of the H and EUH phrases mentioned in this Section, see Section 16.

SECTION 4: First aid measures

4.1 Description of first aid measures
Inhalation: Get medical attention or advice if you feel unwell.
Skin contact: Wash skin with plenty of lukewarm, gently flowing water for at least 30 minutes. Take off
immediately all contaminated clothing and wash it before re-use. Immediately call a POISON
CENTRE, doctor or physician.
Eye contact: Immediately rinse eyes cautiously with lukewarm water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or
physician.
Ingestion: Rinse mouth. Immediately drink 1 glass of water. Do NOT induce vomiting. Keep at rest.
Immediately call a POISON CENTRE, doctor or physician.
Self-protection of first aider: Consider personal protective equipment as indicated in subsection 8.2.

4.2 Most important symptoms and effects, both acute and delayed
Inhalation: No known effects or symptoms in normal use.
Skin contact: Causes severe burns.
Eye contact: Causes severe or permanent damage.
Ingestion: Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation of
oesophagus and stomach.

4.3 Indication of any immediate medical attention and special treatment needed
No information available on clinical testing and medical monitoring. Specific toxicological information on substances, if available, can be found
in section 11.

SECTION 5: Firefighting measures

5.1 Extinguishing media
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.

5.2 Special hazards arising from the substance or mixture

No special hazards known.

5.3 Advice for firefighters

As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Wear suitable protective clothing, gloves and eye/face protection.

6.2 Environmental precautions

Do not allow to enter drainage system, surface or ground water. Dilute with plenty of water.

6.3 Methods and material for containment and cleaning up

Use neutralising agent. Absorb onto dry sand or similar inert material.

6.4 Reference to other sections

For personal protective equipment see subsection 8.2. For disposal considerations see section 13.

SECTION 7: Handling and storage

7.1 Precautions for safe handling
Measures to prevent fire and explosions:
No special precautions required.

Measures to prevent aerosol and dust generation:

Avoid formation of aerosol.

Measures required to protect the environment:

Page 2 / 10
 Safety Data Sheet
Clearklens Flow VH20

For environmental exposure controls see subsection 8.2.

Advices on general occupational hygiene:

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with
other products unless adviced by Diversey. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin
thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Use personal protective
equipment as required. Avoid contact with skin and eyes. Do not breathe spray. Use only with adequate ventilation.

7.2 Conditions for safe storage, including any incompatibilities

Store in accordance with local and national regulations. Keep only in original container. Store in a closed container.
For conditions to avoid see subsection 10.4. For incompatible materials see subsection 10.5.

7.3 Specific end use(s)

No specific advice for end use available.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters
Workplace exposure limits

Air limit values, if available:

Ingredient(s) UK - Long term UK - Short term
value(s) value(s)
sodium hydroxide 2 mg/m3

Biological limit values, if available:

Recommended monitoring procedures, if available:

Additional exposure limits under the conditions of use, if available:

DNEL/DMEL and PNEC values

Human exposure
DNEL oral exposure - Consumer (mg/kg bw)
Ingredient(s) Short term - Local Short term - Systemic Long term - Local Long term - Systemic
effects effects effects effects
sodium hydroxide - - - -

DNEL dermal exposure - Worker

Ingredient(s) Short term - Local Short term - Systemic Long term - Local Long term - Systemic
effects effects (mg/kg bw) effects effects (mg/kg bw)
sodium hydroxide 2% - - -

DNEL dermal exposure - Consumer

Ingredient(s) Short term - Local Short term - Systemic Long term - Local Long term - Systemic
effects effects (mg/kg bw) effects effects (mg/kg bw)
sodium hydroxide 2% - - -

DNEL inhalatory exposure - Worker (mg/m3)

Ingredient(s) Short term - Local Short term - Systemic Long term - Local Long term - Systemic
effects effects effects effects
sodium hydroxide - - 1 -

DNEL inhalatory exposure - Consumer (mg/m3)

Ingredient(s) Short term - Local Short term - Systemic Long term - Local Long term - Systemic
effects effects effects effects
sodium hydroxide - - 1 -

Environmental exposure
Environmental exposure - PNEC
Ingredient(s) Surface water, fresh Surface water, marine Intermittent (mg/l) Sewage treatment
(mg/l) (mg/l) plant (mg/l)
sodium hydroxide - - - -

Environmental exposure - PNEC, continued

Ingredient(s) Sediment, freshwater Sediment, marine Soil (mg/kg) Air (mg/m3)
(mg/kg) (mg/kg)
sodium hydroxide - - - -

8.2 Exposure controls

The following information applies for the uses indicated in subsection 1.2 of the Safety Data Sheet.
If available, please refer to the product information sheet for application and handling instructions.
Normal use conditions are assumed for this section.

Page 3 / 10
 Safety Data Sheet
Clearklens Flow VH20

Recommended safety measures for handling the undiluted product:

Covering activities such as filling and transfer of product to application equipment, flasks or buckets

Appropriate engineering controls: If the product is diluted by using specific dosing systems with no risk of splashes or direct skin
contact, the personal protection equipment as described in this section is not required. Where
possible: use in automated/closed system and cover open containers. Transport over pipes. Filling
with automatic systems. Use tools for manual handling of product.
Appropriate organisational controls: Avoid direct contact and/or splashes where possible. Train personnel.

Personal protective equipment

Eye / face protection: Safety glasses or goggles (EN 166). The use of a full-face shield or other full-face protection is
strongly recommended when handling open containers or if splashes may occur.
Hand protection: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and
breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such
as risk of splashes, cuts, contact time and temperature.
Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: >= 480 min
Material thickness: >= 0.7 mm
Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: >= 30
min Material thickness: >= 0.4 mm
In consultation with the supplier of protective gloves a different type providing similar protection may
be chosen.
Body protection: Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes may
occur (EN 14605).
Respiratory protection: If exposure to liquid particles or splashes cannot be avoided use: half mask (EN 140) with particle
filter P2 (EN 143) or full-face mask (EN 136) with particle filter P1 (EN 143) Consider specific local
use conditions. In consultation with the supplier of respiratory protection equipment a different type
providing similar protection may be chosen. Specific applications tools may be available to limit
exposure. Please refer to the product information sheet for the possibilities.

Environmental exposure controls: Should not reach sewage water or drainage ditch undiluted or unneutralised.

Recommended safety measures for handling the diluted product:

Recommended maximum concentration (%): 7

Appropriate engineering controls: Provide a good standard of general ventilation. Where possible: use in automated/closed system
and cover open containers. Transport over pipes. Filling with automatic systems. Use tools for
manual handling of product.
Appropriate organisational controls: Avoid direct contact and/or splashes where possible. Train personnel.

Personal protective equipment

Eye / face protection: Goggles (EN 166). The use of a full-face shield or other full-face protection is strongly
recommended when handling open containers or if splashes may occur.
Hand protection: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and
breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such
as risk of splashes, cuts, contact time and temperature.
Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: >= 480 min
Material thickness: >= 0.7 mm
Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: >= 30
min Material thickness: >= 0.4 mm
In consultation with the supplier of protective gloves a different type providing similar protection may
be chosen.
Body protection: Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes may
occur (EN 14605).
Respiratory protection: If exposure to liquid particles or splashes cannot be avoided use: half mask (EN 140) with particle
filter P2 (EN 143) or full-face mask (EN 136) with particle filter P1 (EN 143) Consider specific local
use conditions. In consultation with the supplier of respiratory protection equipment a different type
providing similar protection may be chosen. Specific applications tools may be available to limit
exposure. Please refer to the product information sheet for the possibilities.

Environmental exposure controls: No special requirements under normal use conditions.

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties
Information in this section refers to the product, unless it is specifically stated that substance data is listed

Method / remark
Physical State: Liquid
Colour: Clear, Pale, Yellow
Odour: Product specific
Odour threshold: Not applicable
pH: > 12 (neat)

Page 4 / 10
 Safety Data Sheet
Clearklens Flow VH20

Melting point/freezing point (°C): Not determined Not relevant to classification of this product
Initial boiling point and boiling range (°C): Not determined

Substance data, boiling point

Ingredient(s) Value Method Atmospheric pressure
(°C) (hPa)
sodium hydroxide > 990 Method not given

Method / remark
Flash point (°C): Not applicable.
Sustained combustion: Not applicable.
( UN Manual of Tests and Criteria, section 32, L.2 )
Evaporation rate: Not determined
Flammability (solid, gas): Not determined
Upper/lower flammability limit (%): Not determined

Substance data, flammability or explosive limits, if available:

Method / remark
Vapour pressure: Not determined

Substance data, vapour pressure

Ingredient(s) Value Method Temperature
(Pa) (°C)
sodium hydroxide < 1330 Method not given 20

Method / remark
Vapour density: Not determined
Relative density: ≈ 1. 49 (20° C)
Solubility in / Miscibility with Water: Fully miscible

Substance data, solubility in water

Ingredient(s) Value Method Temperature
(g/l) (°C)
sodium hydroxide 1000 Method not given 20

Substance data, partition coefficient n-octanol/water (log Kow): see subsection 12.3
Method / remark
Autoignition temperature: Not determined
Decomposition temperature: Not applicable.
Viscosity: Not determined
Explosive properties: Not explosive.
Oxidising properties: Not oxidising.

9.2 Other information

Surface tension (N/m): Not determined Not relevant to classification of this product
Corrosion to metals: Corrosive Weight of evidence

Substance data, dissociation constant, if available:

SECTION 10: Stability and reactivity

10.1 Reactivity
No reactivity hazards known under normal storage and use conditions.

10.2 Chemical stability

Stable under normal storage and use conditions.

10.3 Possibility of hazardous reactions

No hazardous reactions known under normal storage and use conditions.

10.4 Conditions to avoid

None known under normal storage and use conditions.

10.5 Incompatible materials

Reacts with acids.

10.6 Hazardous decomposition products

None known under normal storage and use conditions.

SECTION 11: Toxicological information

11.1 Information on toxicological effects

Page 5 / 10
 Safety Data Sheet
Clearklens Flow VH20

Mixture data:.

Relevant calculated ATE(s):

ATE - Oral (mg/kg): >5000

Substance data, where relevant and available, are listed below:.

Acute toxicity
Acute oral toxicity
Ingredient(s) Endpoint Value Species Method Exposure
(mg/kg) time (h)
sodium hydroxide No data
available

Acute dermal toxicity

Ingredient(s) Endpoint Value Species Method Exposure
(mg/kg) time (h)
sodium hydroxide No data
available

Acute inhalative toxicity

Ingredient(s) Endpoint Value Species Method Exposure
(mg/l) time (h)
sodium hydroxide No data
available

Irritation and corrosivity

Skin irritation and corrosivity
Ingredient(s) Result Species Method Exposure time
sodium hydroxide Corrosive Rabbit Method not given

Eye irritation and corrosivity

Ingredient(s) Result Species Method Exposure time
sodium hydroxide Corrosive Rabbit Method not given

Respiratory tract irritation and corrosivity

Ingredient(s) Result Species Method Exposure time
sodium hydroxide No data available

Sensitisation
Sensitisation by skin contact
Ingredient(s) Result Species Method Exposure time (h)
sodium hydroxide Not sensitising Human repeated patch
test

Sensitisation by inhalation
Ingredient(s) Result Species Method Exposure time
sodium hydroxide No data available

CMR effects (carcinogenicity, mutagenicity and toxicity for reproduction)

Mutagenicity
Ingredient(s) Result (in-vitro) Method Result (in-vivo) Method
(in-vitro) (in-vivo)
sodium hydroxide No evidence for mutagenicity, negative DNA repair test No evidence for mutagenicity, negative OECD 474 (EU
test results on rat test results B.12) OECD
hepatocytes 475 (EU B.11)
OECD 473

Carcinogenicity
Ingredient(s) Effect
sodium hydroxide No evidence for carcinogenicity, weight-of-evidence

Toxicity for reproduction

Ingredient(s) Endpoint Specific effect Value Species Method Exposure Remarks and other effects
(mg/kg bw/d) time reported
sodium hydroxide No data No evidence for developmental
available toxicity No evidence for
reproductive toxicity

Repeated dose toxicity

Sub-acute or sub-chronic oral toxicity
Ingredient(s) Endpoint Value Species Method Exposure Specific effects and organs
(mg/kg bw/d) time (days) affected

Page 6 / 10
 Safety Data Sheet
Clearklens Flow VH20

sodium hydroxide No data

available

Sub-chronic dermal toxicity

Ingredient(s) Endpoint Value Species Method Exposure Specific effects and organs
(mg/kg bw/d) time (days) affected
sodium hydroxide No data
available

Sub-chronic inhalation toxicity

Ingredient(s) Endpoint Value Species Method Exposure Specific effects and organs
(mg/kg bw/d) time (days) affected
sodium hydroxide No data
available

Chronic toxicity
Ingredient(s) Exposure Endpoint Value Species Method Exposure Specific effects and Remark
route (mg/kg bw/d) time organs affected
sodium hydroxide No data
available

STOT-single exposure
Ingredient(s) Affected organ(s)
sodium hydroxide No data available

STOT-repeated exposure
Ingredient(s) Affected organ(s)
sodium hydroxide No data available

Aspiration hazard
Substances with an aspiration hazard (H304), if any, are listed in section 3. If relevant, see section 9 for dynamic viscosity and relative density
of the product.

Potential adverse health effects and symptoms

Effects and symptoms related to the product, if any, are listed in subsection 4.2.

SECTION 12: Ecological information

12.1 Toxicity

No data is available on the mixture.

Substance data, where relevant and available, are listed below:

Aquatic short-term toxicity

Aquatic short-term toxicity - fish
Ingredient(s) Endpoint Value Species Method Exposure
(mg/l) time (h)
sodium hydroxide LC 50 35 Various Method not given 96
species

Aquatic short-term toxicity - crustacea

Ingredient(s) Endpoint Value Species Method Exposure
(mg/l) time (h)
sodium hydroxide EC 50 40.4 Ceriodaphnia Method not given 48
sp.

Aquatic short-term toxicity - algae

Ingredient(s) Endpoint Value Species Method Exposure
(mg/l) time (h)
sodium hydroxide EC 50 22 Photobacteriu Method not given 0.25
m
phosphoreum

Aquatic short-term toxicity - marine species

Ingredient(s) Endpoint Value Species Method Exposure
(mg/l) time (days)
sodium hydroxide No data -
available

Impact on sewage plants - toxicity to bacteria

Ingredient(s) Endpoint Value Inoculum Method Exposure
(mg/l) time
sodium hydroxide No data
available

Aquatic long-term toxicity

Page 7 / 10
 Safety Data Sheet
Clearklens Flow VH20

Aquatic long-term toxicity - fish

Ingredient(s) Endpoint Value Species Method Exposure Effects observed
(mg/l) time
sodium hydroxide No data
available

Aquatic long-term toxicity - crustacea

Ingredient(s) Endpoint Value Species Method Exposure Effects observed
(mg/l) time
sodium hydroxide No data
available

Aquatic toxicity to other aquatic benthic organisms, including sediment-dwelling organisms, if available:
Ingredient(s) Endpoint Value Species Method Exposure Effects observed
(mg/kg dw time (days)
sediment)
sodium hydroxide No data -
available

Terrestrial toxicity
Terrestrial toxicity - soil invertebrates, including earthworms, if available:
Ingredient(s) Endpoint Value Species Method Exposure Effects observed
(mg/kg dw time (days)
soil)
sodium hydroxide No data -
available

Terrestrial toxicity - plants, if available:

Ingredient(s) Endpoint Value Species Method Exposure Effects observed
(mg/kg dw time (days)
soil)
sodium hydroxide No data -
available

Terrestrial toxicity - birds, if available:

Ingredient(s) Endpoint Value Species Method Exposure Effects observed
time (days)
sodium hydroxide No data -
available

Terrestrial toxicity - beneficial insects, if available:

Ingredient(s) Endpoint Value Species Method Exposure Effects observed
(mg/kg dw time (days)
soil)
sodium hydroxide No data -
available

Terrestrial toxicity - soil bacteria, if available:

Ingredient(s) Endpoint Value Species Method Exposure Effects observed
(mg/kg dw time (days)
soil)
sodium hydroxide No data -
available

12.2 Persistence and degradability

Abiotic degradation
Abiotic degradation - photodegradation in air, if available:
Ingredient(s) Half-life time Method Evaluation Remark
sodium hydroxide 13 second(s) Method not given Rapidly photodegradable

Abiotic degradation - hydrolysis, if available:

Abiotic degradation - other processes, if available:

Biodegradation
Ready biodegradability - aerobic conditions
Ingredient(s) Inoculum Analytical DT 50 Method Evaluation
method
sodium hydroxide Not applicable (inorganic
substance)

Ready biodegradability - anaerobic and marine conditions, if available:

Degradation in relevant environmental compartments, if available:

12.3 Bioaccumulative potential

Partition coefficient n-octanol/water (log Kow)
Ingredient(s) Value Method Evaluation Remark
sodium hydroxide No data available Not relevant, does not

Page 8 / 10
 Safety Data Sheet
Clearklens Flow VH20

bioaccumulate

Bioconcentration factor (BCF)

Ingredient(s) Value Species Method Evaluation Remark
sodium hydroxide No data available

12.4 Mobility in soil

Adsorption/Desorption to soil or sediment
Ingredient(s) Adsorption Desorption Method Soil/sediment Evaluation
coefficient coefficient type
Log Koc Log Koc(des)
sodium hydroxide No data available Mobile in soil

12.5 Results of PBT and vPvB assessment

Substances that fulfill the criteria for PBT/vPvB, if any, are listed in section 3.

12.6 Other adverse effects

No other adverse effects known.

SECTION 13: Disposal considerations

13.1 Waste treatment methods
Waste from residues / unused The concentrated contents or contaminated packaging should be disposed of by a certified handler
products: or according to the site permit. Release of waste to sewers is discouraged. The cleaned packaging
material is suitable for energy recovery or recycling in line with local legislation.
European Waste Catalogue: 20 01 15* - alkalines.

Empty packaging
Recommendation: Dispose of observing national or local regulations.
Suitable cleaning agents: Water, if necessary with cleaning agent.

SECTION 14: Transport information

Land transport (ADR/RID), Sea transport (IMDG), Air transport (ICAO-TI / IATA-DGR)
14.1 UN number: 1824
14.2 UN proper shipping name:
Sodium hydroxide solution
14.3 Transport hazard class(es):
Class: 8
Label(s): 8
14.4 Packing group: II
14.5 Environmental hazards:
Environmentally hazardous: No
Marine pollutant: No
14.6 Special precautions for user: None known.
14.7 Transport in bulk according to Annex II of MARPOL and the IBC Code: The product is not transported in bulk tankers.
Other relevant information:
ADR
Classification code: C5
Tunnel restriction code: E
Hazard identification number: 80
IMO/IMDG
EmS: F-A, S-B
The product has been classified, labelled and packaged in accordance with the requirements of ADR and the provisions of the IMDG Code
Transport regulations include special provisions for certain classes of dangerous goods packed in limited quantities.

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

EU regulations:
•Regul
ati
on(
EC)No1272/ 2008-CLP
•Regul
ati
on(
EC)No.1907/2006-REACH
•Regul
ati
on(
EC)No.648/2004-Deter
gent
sregul
ati
on

Page 9 / 10
 Safety Data Sheet
Clearklens Flow VH20

Authorisations or restrictions (Regulation (EC) No 1907/2006, Title VII respectively Title VIII): Not applicable.

Ingredients according to EC Detergents Regulation 648/2004

phosphonates <5%

15.2 Chemical safety assessment

A chemical safety assessment has not been carried out on the mixture

SECTION 16: Other information

The information in this document is based on our best present knowledge. However, it does not constitute a guarantee for any specific product
features and does not establish a legally binding contract

SDS code: MSDS5273 Version: 03.1 Revision: 2018-01-25

Reason for revision:
This data sheet contains changes from the previous version in section(s):, 2, 3, 16
Classification procedure
The classification of the mixture is in general based on calculation methods using substance data, as required by Regulation (EC) No
1272/2008. If for certain classifications data on the mixture is available or for example bridging principles or weight of evidence can be used for
classification, this will be indicated in the relevant sections of the Safety Data Sheet. See section 9 for physical chemical properties, section 11
for toxicological information and section 12 for ecological information.

Full text of the H and EUH phrases mentioned in section 3:

•H290-Maybecorrosi
vetometal
s.
•H314-Causessever
es ki
nbur
nsandey
edamage.
Abbreviations and acronyms:
•AISE-TheinternationalAs soci
ationforSoaps,Deter
gentsandMaint
enancePr
oduct
s
•DNEL-DerivedNoEf f
ec tLimit
•EUH-CLPSpec i
fi
chaz ar ds t
atement
•PBT-Persi
stent,Bioac cumul at
iveandTox ic
•PNEC-Predic t
edNoEf fec tConc ent
rati
on
•REACHnumber-REACHr egistr
ati
onnumber ,wi
thoutsuppl
i
erspeci
fi
cpar
t
•vPvB-ver
yPer s i
stentandver yBioaccumulat
ive
•ATE-AcuteTox ici
tyEs t
imat e

End of Safety Data Sheet

Page 10 / 10