Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    SAF Holland Mechanical Suspension Kits

    Uploaded by

    shenoibrijithmax
    This document provides information on mechanical suspension kits for trailers. It describes kits for single, tandem, tri, and spread axles ranging from 25,000 to 75,000 pound capacity. Each kit contains all the necessary components and is available in straddle mount, under mount, and flange mount configurations. Specifications are provided for leaf spring selection and axle connection kits including spring seat height options and resulting ride heights.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SAF Holland Mechanical Suspension Kits

    Uploaded by

    shenoibrijithmax
    23 views4 pages
    This document provides information on mechanical suspension kits for trailers. It describes kits for single, tandem, tri, and spread axles ranging from 25,000 to 75,000 pound capacity. Each kit contains all the necessary components and is available in straddle mount, under mount, and flange mount configurations. Specifications are provided for leaf spring selection and axle connection kits including spring seat height options and resulting ride heights.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on mechanical suspension kits for trailers. It describes kits for single, tandem, tri, and spread axles ranging from 25,000 to 75,000 pound capacity. Each kit contains all the necessary components and is available in straddle mount, under mount, and flange mount configurations. Specifications are provided for leaf spring selection and axle connection kits including spring seat height options and resulting ride heights.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views4 pages

    SAF Holland Mechanical Suspension Kits

    Uploaded by

    shenoibrijithmax
    This document provides information on mechanical suspension kits for trailers. It describes kits for single, tandem, tri, and spread axles ranging from 25,000 to 75,000 pound capacity. Each kit contains all the necessary components and is available in straddle mount, under mount, and flange mount configurations. Specifications are provided for leaf spring selection and axle connection kits including spring seat height options and resulting ride heights.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MECHANICAL SUSPENSION KITS

    EASY TO ORDER
    MECHANICAL
    SUSPENSION KITS
    MECHANICAL SUSPENSIONS MADE AVAILABLE IN CONVENIENT, EA

    SINGLE AXLE SUSPENSION KITS 25,000 lbs. (11,340 kg) Capacity

    STRADDLE MOUNT
    SPK0060

    UNDER MOUNT
    SPK0064

    KIT CONTENTS
    FLANGE MOUNT 2 front hangers SP0100, 2 rear hangers SP0120, 1 adj. torque arm SP0123, 1 rigid torque arm
    SPK0068 SP0143, 4 rebound bolts XB-SP0050-71, 4 rebound bolt spacers XB-SP0145, 4 rebound bolt
    nuts XB-SP0012-10, 4 torque arm bolts XB-SP0050-75, 4 torque arm bolt nuts XB-SP0012-36

    TANDEM AXLE SUSPENSION KITS 50,000 lbs. (22,680 kg) Capacity

    STRADDLE MOUNT
    SPK0061

    UNDER MOUNT
    SPK0065

    KIT CONTENTS
    2 front hangers SP0100, 2 rear hangers SP0120, 2 equilizer hangers SP0119, 2 adj. torque
    FLANGE MOUNT arms SP0123, 2 fixed torque arms SP0143, 8 rebound bolts XB-SP0050-71, 8 rebound bolt
    SPK0069 spacers XB-SP0145, 8 rebound bolt nuts XB-SP0012-10, 8 torque arm bolts XB-SP0050-75,
    8 torque arm bolt nuts XB-SP0012-36

    TRAILE R A PPL ICATION S


    ➤ Platform ➤ Container Chassis ➤ Dump ➤ Tanker ➤ Rear Dump ➤ Gravel ➤ Livestock ➤ Grain
    ASY-TO-ORDER SUSPENSION AND AXLE CONNECTION PARTS KITS.

    TRI-AXLE SUSPENSION KITS 75,000 lbs. (34,020 kg) Capacity

    STRADDLE MOUNT
    SPK0062

    UNDER MOUNT
    SPK0066

    KIT CONTENTS
    2 front hangers SP0100, 2 rear hangers SP0120, 4 equilizer hangers SP0119, 3 adj. torque arms
    FLANGE MOUNT SP0123, 3 fixed torque arms SP0143, 12 rebound bolts XB-SP0050-71, 12 rebound bolt spacers
    SPK0070 XB-SP0145, 12 rebound bolt nuts XB-SP0012-10, 12 torque arm bolts XB-SP0050-75, 12 torque
    arm bolt nuts XB-SP0012-36

    SPREAD AXLE SUSPENSION KITS 50,000 lbs. (22,680 kg) Capacity

    STRADDLE MOUNT
    SPK0063

    UNDER MOUNT
    SPK0067

    KIT CONTENTS
    2 front hangers SP0100, 2 rear hangers SP0120, 2 equilizer hangers SP0345, 3 adj. torque arms
    FLANGE MOUNT SP0123, 1 fixed torque arm SP0143, 8 rebound bolts XB-SP0050-71, 8 rebound bolt spacers XB-
    SPK0071 SP0145, 8 rebound bolt nuts XB-SP0012-10, 8 torque arm bolts XB-SP0050-75, 8 torque arm bolt
    nuts XB-SP0012-36

    LEAF SPRING SELECTION


    SPRING TYPE SINGLE LEAF TWO LEAF THREE LEAF THREE LEAF HD
    LOW ARCH SP0363 SP0326 SP0356 SP0365-01
    MEDIUM ARCH – SP0325 SP0355 –
    HIGH ARCH SP0360 SP0324 SP0354 SP0365

    CAPACITY RATING 22,400 LBS. WITH 1, 2 OR 3 LEAF SPRINGS AND 24,000 LBS. WITH 3 HEAVY DUTY LEAF SPRINGS

    GENERAL INFORMATION
    Installation instructions, ride height calculations, welding instructions, torque specifications, and hanger placement can be found in
    publication XL-MS175 on the SAF-HOLLAND website www.safholland.us. Warranty is 5 years parts and labor. Duralite suspensions
    by design require a minimum amount of maintenance, however, suspensions in “over the road” operations require periodic checks
    to be certain of continued trouble-free performance. We recommend, after an initial loaded run-in period of at least 1,000 miles,
    that you recheck the trailer axle alignment and retorque all fasteners, including U-bolts. Routine visual inspection and appropriate
    maintenance of suspension is required every six months or 25,000 miles, whichever comes first. This includes inspecting and re-
    torquing all fasteners and U-bolts as required.
    Axle Connection Kit information provided on back page.
    AXLE CONNECTION KITS
    MOUNTING HEIGHT SPRING SEAT SELECTION
    I M P O R T A N T : It is the installer’s responsibility to select the correct mounting height. There should be at least 4½” of vertical tire clearance
    with an unloaded vehicle. In addition, clearance must be provided at the side, front, and rear of the tires to prevent tire contact during suspension
    movement. The mounting heights, shown below, are nominal values and may vary due to variations in the leaf springs and other components.

    XL-AM117 Rev C · 2010-04-16 · Amendments and Errors Reserved © SAF-HOLLAND, Inc.


    ROUND AXLE OVER SLUNG AXLE CONNECTION KITS
    S P R I N G S E A T H E I G H T A N D U - B O L T K I T (One kit required per axle)
    SPRING SEAT HEIGHT 3/4” 1 1/ 4 ” 1 3/ 4 ” 2 1/ 4 ” 2 3/ 4 ” 3 1/ 4 ” 3 3/ 4 ”
    LEAF 1&2 SPK0080 SPK0081 SPK0082 SPK0083 SPK0084 SPK0085 SPK0086
    SPRINGS 3 & 3HD SPK0031 SPK0032 SPK0033 SPK0034 SPK0035 SPK0036 SPK0037
    LOW ARCH RIDE HEIGHT 13¼˝ 13¼˝ 14¼˝ 14¾˝ 15¼˝ 15¾˝ 16¼˝
    MEDIUM ARCH RIDE HEIGHT 14˝ 14½˝ 15˝ 15½˝ 16˝ 16½˝ 17˝
    HIGH ARCH RIDE HEIGHT 15½˝ 16˝ 16½˝ 17˝ 17½˝ 18˝ 18½˝

    I M P O R T A N T : Mounting heights should not exceed 17½˝ for best performance. Mounting height should provide a minimum
    of 4 ½˝ of tire clearance with an empty vehicle. This table applies to under mount or flange mount hangers on a multi-axle suspension.
    For single axle suspensions, subtract ½˝ from the above heights. For straddle mount hangers, subtract ½˝ from above heights.

    ROUND AXLE UNDER SLUNG AXLE CONNECTION KITS


    S P R I N G S E A T H E I G H T A N D U - B O L T K I T ( O n e k i t re q u i re d p e r a x l e )
    SPRING SEAT HEIGHT 3/4” 1 ¼” 1 ¾” 2¼”
    LEAF SPRINGS 2, 3 & 3HD SPK0045 SPK0046 SPK0047 SPK0048
    LOW ARCH RIDE HEIGHT 4 ½˝ – – –
    MEDIUM ARCH RIDE HEIGHT 5 ½˝ 5˝ 4 ½˝ –
    HIGH ARCH RIDE HEIGHT 7˝ 6 ½˝ 6˝ 5 ½˝

    I M P O R T A N T : Mounting heights less than 4 ½˝ are not suggested due to lack of clearance between
    the axle and trailer frame. Mounting height should provide a minimum of 4 ½˝ of tire clearance with an empty
    vehicle. Sufficient clearance should be provided for axle movement. This table applies to under mount or flange
    mount hangers with a multi-axle suspension. For single axle suspensions, subract ½˝ from the above heights. For
    straddle mount hangers, subract ½˝ from the above heights.

    SQUARE AXLE OVER SLUNG AXLE CONNECTION KITS


    S P R I N G S E A T H E I G H T A N D U - B O L T K I T ( O n e k i t re q u i re d p e r a x l e )
    SPRING SEAT HEIGHT 1¼” 1 ¾” 2¼” 2¾”
    LEAF 1&2 SPK0076 SPK0077 SPK0078 SPK0079
    SPRINGS 3 & 3HD SPK0072 SPK0073 SPK0074 SPK0075
    LOW ARCH RIDE HEIGHT 14 ¼˝ 14¾˝ 15¼˝ 15¾˝
    MEDIUM ARCH RIDE HEIGHT 15˝ 15½˝ 16˝ 16½˝
    HIGH ARCH RIDE HEIGHT 16½˝ 17˝ 17½˝ 18˝

    SAF-HOLLAND USA, Inc. SAF-HOLLAND Canada Limited


    888.396.6501 Fax 800.356.3929 519.537.3494 Fax 800.565.7753
    Western Canada 604.574.7491 Fax 604.574.0244

    www.safholland . us

    You might also like