Second Year Booklet - 2022-23 - 280622

ACADEMIC
REGULATIONS
&
SYLLABUS
Faculty of Technology & Engineering
Bachelor of Technology Programme

(Second Year Civil Engineering)
Effective from 2022-23
CHAROTAR UNIVERSITY OF
SCIENCE & TECHNOLOGY
Vision
“To provide state of the art education in Civil Engineering guided by innovative research
leading to centre of excellence in Civil Engineering education having recognition at
national and international levels”
Mission
“Being a pioneering branch of Engineering, the department of Civil Engineering under the
shelter of CHARUSAT is intended as a facilitator for creating a liaison between the
brilliant student community and the next generation industrial needs”
Programme Educational Objectives (PEO’s):

PEO 1: The graduate will possess foundation of engineering knowledge and exhibiting
critical thinking and problem solving skills
PEO 2: The graduates will have trait of lifelong learning and be able to inculcate the
capabilities to meet the diversified needs of industry, academia and research.
PEO 3: The graduate will exhibit the professional ethics and be supportive to the social
needs
PEO 4: The graduates will possess comprehending, analyzing and designing capabilities
to generate sustainable solutions
Programme Outcomes (PO’s)

Engineering Graduates will be able to:
1. Engineering Knowledge: Apply the knowledge of mathematics, science, engineering
fundamentals, and an engineering specialization to the solution of complex
engineering problems.
2. Problem Analysis: Identify, formulate, review research literature, and analyze
complex engineering problems reaching substantiated conclusions using first
principles of mathematics, natural sciences, and engineering sciences.
© CHARUSAT 2022-23 Page 2 of 65

3. Design/Development of Solutions: Design solutions for complex engineering
problems and design system components or processes that meet the specified needs
with appropriate consideration for the public health and safety, and the cultural,
societal, and environmental considerations.
4. Conduct Investigations of Complex Problems: Use research-based knowledge and
research methods including design of experiments, analysis and interpretation of data,
and synthesis of the information to provide valid conclusions.
5. Modern Tool Usage: Create, select, and apply appropriate techniques, resources, and
modern engineering and IT tools including prediction and modeling to complex
engineering activities with an understanding of the limitations.
6. The Engineer and Society: Apply reasoning informed by the contextual knowledge to
assess societal, health, safety, legal and cultural issues and the consequent
responsibilities relevant to the professional engineering practice.
7. Environment and sustainability: Understand the impact of the professional
engineering solutions in societal and environmental contexts, and demonstrate the
knowledge of, and need for sustainable development.
8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities
and norms of the engineering practice.
9. Individual and Team Work: Function effectively as an individual, and as a member
or leader in diverse teams, and in multidisciplinary settings.
10. Communication: Communicate effectively on complex engineering activities with the
engineering community and with society at large, such as, being able to comprehend
and write effective reports and design documentation, make effective presentations,
and give and receive clear instructions.
11. Project Management and Finance: Demonstrate knowledge and understanding of
the engineering and management principles and apply these to one’s own work, as a
member and leader in a team, to manage projects and in multidisciplinary
environments.
12. Life-long Learning: Recognize the need for, and have the preparation and ability to
engage in independent and life-long learning in the broadest context of technological
change.

Programme Specific Outcomes (PSO’s):
By the completion of Civil Engineering program, the student will attain:

PSO 1: The ability to serve the infrastructure sector with capabilities to plan, design,
analyze and building civil engineering-based systems
PSO 2: The ability to adopt to the state-of-the-art practices in all sectors of Civil
Engineering.
PSO 3: Employability skills with the cognizance of social and environmental necessity
along with ethical responsibility to have a successful career and to become an
entrepreneur.
CHARUSAT welcomes you for a Bright Future

CHAROTAR UNIVERSITY OF SCIENCE AND TECHNOLOGY
Accredited with Grade A by NAAC,
Accredited with Grade A by KCG
Faculty of Technology and Engineering
ACADEMIC REGULATIONS
Bachelor of Technology (Civil Engineering) Programme
Charotar University of Science and Technology (CHARUSAT)

CHARUSAT Campus, At Post: Changa – 388421, Taluka: Petlad, District: Anand
Phone: 02697-247500, Fax: 02697-247100, Email: info@charusat.ac.in
www.charusat.ac.in

Academic Year – 2022-23
CHARUSAT
FACULTY OF TECHNOLOGY AND ENGINEERING
ACADEMIC REGULATIONS
Bachelor of Technology Programmes
To ensure uniform system of education, duration of undergraduate and post graduate

programmes, eligibility criteria for and mode of admission, credit load requirement
and its distribution between course and system of examination and other related
aspects, following academic rules and regulations are recommended.
1. System of Education
The Semester system of education should be followed across the Charotar

University of Science and Technology (CHARUSAT) both at Undergraduate and
Master’s levels. Each semester will be at least of 90 working days duration. Every
enrolled student will be required to take a specified load of course work in the
chosen subject of specialization and also complete a project/dissertation if any.
2. Duration of Programme
Undergraduate programme (B. Tech.)

Minimum 8 semesters (4 academic years)
Maximum 12 semesters (6 academic years)
3. Eligibility for Admissions
As enacted by Govt. of Gujarat from time to time.
4. Mode of Admissions
As enacted by Govt. of Gujarat from time to time.
5. Programme Structure and Credits
As per Annexure – 1 attached

6. Attendance
All activities prescribed under these regulations and enlisted by the course
faculty members in their respective course outlines are compulsory for all
students pursuing the courses. No exemption will be given to any student
regarding attendance except on account of serious personal illness or
accident or family calamity that may genuinely prevent a student from
attending a particular session or a few sessions. However, such unexpected
absence from classes and other activities will be required to be condoned
by the Principal.
Student’s attendance in a course should be 80%.
7. Course Evaluation
7.1 The performance of every student in each course will be evaluated as follows:
7.1.2 Internal evaluation by the course faculty member(s) based on continuous
assessment, for 30% of the marks for the course; and
7.1.3 Final examination by the University through modes such as; written paper
or practical test or oral test or presentation by the student or a
combination of any two or more of these, is set to 70% of the marks for
each the course.
7.2 Internal Evaluation

As per Annexure – 1 attached
7.3 University Examination

The final examination by the University for 70% of the evaluation for the course
will be through written paper or practical test or oral test or presentation by the
student or a combination of any two or more of these.
7.4 In order to earn the credit in a course a student has to obtain grade other than
FF.
7.5 Performance at Internal & University Examination

7.5.1 Minimum performance with respect to internal marks as well as university
examination will be an important consideration for passing a course.
Details of minimum percentage of marks to be obtained in the
examinations (internal/external) are as follows:
Minimum marks in Minimum marks Overall

University Exam per per course
course
40% 45%
7.5.2 A student failing to score 40% in the final examination will get an FF
grade.

7.5.3 If a candidate obtains minimum required marks in each course but fails to
obtain minimum required overall marks, he/she has to repeat the university
examination till the minimum required overall marks are obtained.
8. Grading
8.1 The total of the internal evaluation marks and final University examination marks
in each course will be converted to a letter grade on a ten-point scale as per the
following scheme:
Table: Grading Scheme (UG)

<80 <73 <66 <60 <55 <50
Range of Marks (%) ≥80 <45
≥73 ≥66 ≥60 ≥55 ≥50 ≥45
Corresponding
AA AB BB BC CC CD DD FF
Letter Grade
Numerical point
(Grade Point)
10 9 8 7 6 5 4 0
corresponding to
the letter grade
8.2 The student’s performance in any semester will be assessed by the Semester Grade Point
Average (SGPA). Similarly, his/her performance at the end of two or more consecutive
semesters will be denoted by the Cumulative Grade Point Average (CGPA). The SGPA
and CGPA are calculated as follows:
(i) SGPA = ∑ CiGi/ ∑ Ci where,

Ci= Number of credits of course i
Gi = Grade Point for the course i
i = 1 to n
n = number of courses in the semester
(ii) CGPA = ∑ CiGi/ ∑ Ci where,

Ci = Number of credits of course i
Gi = Grade Point for the course i
i = 1 to n
n = number of courses of all semesters up to
which CGPA is computed
(iii) No student will be allowed to move further in next semester if CGPA is

less than 3 at the end of an academic year.
(iv) A student will not be allowed to move to third year if he/she has not
cleared all the courses of first year.
(v) A student will not be allowed to move to fourth year if he/she has not
cleared all the courses of first and second year.

9. Award of Degree
9.1 Every student of the programme who fulfills the following criteria will be eligible
for the award of the degree:
9.1.1 He/ She should have earned minimum required credits as prescribed in
course structure; and
9.1.2 He/ She should have cleared all internal and external evaluation
components in every course; and
9.1.3 He/ She should have secured a minimum CGPA of 4.5 at the end of the
programme;
9.1.4 In addition to above, the student has to complete the required
formalities as per the regulatory bodies, if any.
9.2 The student who fails to satisfy minimum requirement of CGPA will be allowed to
improve the grades so as to secure a minimum CGPA for award of degree. Only
latest grade will be considered.
10. Award of Class
The class awarded to a student in the programme is decided by the final CGPA as
per the following scheme:
Distinction : CGPA ≥ 7.5 & ≤ 10.0

First class : CGPA ≥ 6.0 & < 7.5
Second Class : CGPA ≥ 5.0 & < 6.0
Pass : CGPA < 5.0
11. Transcript
The transcript issued to the student at the time of leaving the University will
contain a consolidated record of all the courses taken, credits earned, grades
obtained, SGPA,CGPA, class obtained, etc.

(CHARUSAT)
FACULTY OF TECHNOLOGY & ENGINEERING (FTE)
CHOICE BASED CREDIT SYSTEM

A. Choice Based Credit System:
With the aim of incorporating the various guidelines initiated by the University
Grants Commission (UGC) to bring equality, efficiency and excellence in the Higher
Education System, Choice Based Credit System (CBCS) has been adopted. CBCS
offers wide range of choices to students in all semesters to choose the courses based
on their aptitude and career objectives. It accelerates the teaching-learning process
and provides flexibility to students to opt for the courses of their choice and / or
undergo additional courses to strengthen their Knowledge, Skills and Attitude.
1. CBCS – Conceptual Definitions / Key Terms (Terminologies)
1.1. Core Courses

1.1.1 University Core (UC)
University Core Courses are those courses which all students of the
University of a Particular Level (PG/UG) will study irrespective of their
Programme/Specialization.
1.1.2 Programme Core (PC)

A ‘Core Course’ is a course which acts as a fundamental or conceptual
base for Chosen Specialization of Engineering. It is mandatory for all
students of a particular Programme and will not have any other choice
for the same.
1.2 Elective Course (EC)

An ‘Elective Course’ is a course in which options / choices for course will be
offered. It can either be for a Functional Course / Area or Streams of
Specialization / Concentration which is / are offered or decided or declared by
the University/Institute/Department (as the case may be) from time to time.
1.2.1 Institute Elective Course (IE)

Institute Courses are those courses which any students of the
University/Institute of a Particular Level (PG/UG) will choose as
offered or decided by the University/Institute from time-to-time
irrespective of their Programme /Specialization
1.2.2 Programme Elective Course (PE)

A ‘Programme Elective Course’ is a course for the specific programme in
which students will opt for specific course(s) from the given set of
functional course/ Area or Streams of Specialization options as offered
or decided by the department from time-to-time.

1.2.3 Cluster Elective Course (CE)
A ‘Cluster Elective Course’ is a course which students can choose from
the given set of functional course/ Area or Streams of Specialization
options (e.g. Common Courses for EC/CE/IT/EE) as offered by or
decided by the Institute from time-to-time.
1.3 Non Credit Course (NC) - AUDIT Course
A ‘Non Credit Course’ is a course where students will receive Participation or

Course Completion certificate. This will not be reflected in Student’s Grade Sheet.
Attendance and Course Assessment is compulsory for Non Credit Courses.

Annexure – 1
CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY (CHARUSAT)
TEACHING & EXAMINATION SCHEME FOR B TECH PROGRAMME IN CIVIL ENGINEERING
Teaching Scheme Examination Scheme
Level Course Code Course Title Contact Hours Theory Practical
Credit Total
Theory Practical Total Internal External Internal External
MA251 Engineering Mathematics III 4 4 4 30 70 100
CL241 Geology for Civil Engineers 4 2 6 5 30 70 25 25 150
CL242 Surveying 4 2 6 5 30 70 25 25 150
CL243 Mechanics of Solids 4 2 6 5 30 70 25 25 150
HS121.02 A Creativity, Problem Solving and
2 2 2 30 70 100
Innovation
XXXXX University Elective - I 0 2 2 2 30 70 100
Remedial Classes 10
36 23 750
Level 2 CL244 Fluid Mechanics-I 4 2 6 5 30 70 25 25 150
CL245.01 Building Construction Technology 3 2 5 4 30 70 25 25 150
CL246.01 Structural Analysis I 3 2 5 4 30 70 25 25 150
ME241 Material Science & Technology 3 2 5 4 30 70 25 25 150
Human Values and Professional
HS 111.02 A 0 2 2 2 30 70 100
Ethics
MA249 Numerical Methods 3 2 5 4 30 70 25 25 150
XXXXX University Elective - II 0 2 2 2 30 70 100
Remedial Classes 06
36 25 950

LIST OF UNIVERSITY ELECTIVE COURSES
3RD SEMESTER UNDERGRADUATE PROGRAMME

(ACADEMIC YEAR 2022-23)
Department /
Sr.
Course Code & Course Name Faculty offering the
No.
Course
1 EC281.01: Introduction to MATLAB Programming EC / FTE
2 CE281.01: Art of Programming CE / FTE
3 CL281.01: Environmental Sustainability and Climate Change CL / FTE
4 CL283: SDG Handprint Laboratory CL / FTE
5 EE284: Python Programming EE/FTE
6 IT283: Web Designing & UI/UX IT/FTE
7 ME281.01: Engineering Drawing ME/FTE
8 PH233.01: Fundamentals of Packaging RPCP/FPH
9 PD260.01: Basic Laboratory Techniques PDPIAS/FAS
10 NR251.01: First Aid & Life Support NURSING / FMD
11 PT191.01: Health Promotion and Fitness ARIP / FMD
12 CA224: Introduction to Web Designing CMPICA / FCA
13 BM231: Banking and Insurance I2IM / FMS
14 PD261: Astrophysics, Space and Cosmos-1 (ASC–1) PDPIAS/FAS

LIST OF UNIVERSITY ELECTIVE COURSES
4TH SEMESTER UNDERGRADUATE PROGRAMME

(ACADEMIC YEAR 2022-23)
Department /
Sr.
Course Code & Course Name Faculty offering the
No.
Course
1 EC282.01: Prototyping Electronics with Arduino EC / FTE
2 CE282.01: Web Designing CE / FTE
3 CL282.01: Basics of Environmental Impact Assessment CL / FTE
4 EE287: MATLAB Programming EE/FTE
5 EE288: Maintenance Of Household Apparatus EE/FTE
6 IT284: Data Visualization IT/FTE
7 ME282.01: Material Science ME/FTE
8 PH238.01: Cosmetics in daily life RPCP/FPH
9 NR261.01: Life Style Diseases & Management NURSING / FMD
10 PT192.01: Occupational Health & Ergonomics ARIP / FMD
11 CA225: Programming the Internet CMPICA / FCA
12 BM241: Health Care Management I2IM / FMS
13 PD262: Astrophysics, Space and Cosmos-2 (ASC-2) PDPIAS/FAS

CONTENTS
MA251: ENGINEERING MATHEMATICS-III .................................................................... 18
CL241: GEOLOGY FOR CIVIL ENGINEERS ..................................................................... 22
CL242: SURVEYING ............................................................................................................. 27
CL243: MECHANICS OF SOLIDS ........................................................................................ 31
HS121.02 A: CREATIVITY, PROBLEM SOLVING AND INNOVATION ........................ 36
CL244: FLUID MECHANICS- I ............................................................................................ 41
CL245.01: BUILDING CONSTRUCTION TECHNOLOGY ................................................ 46
CL246.01: STRUCTURAL ANALYSIS -I............................................................................. 51
ME241: MATERIAL SCIENCE AND TECHNOLOGY ....................................................... 54
HS111.02 A: HUMAN VALUES & PROFESSIONAL ETHICS .......................................... 58
MA249: NUMERICAL METHODS ....................................................................................... 61
ANNEXURE II - UNIVERSITY ELECTIVE SYLLABI....................................................... 65

B. Tech. (Civil Engineering) Programme
SYLLABI
(Semester – 3)

MA251: ENGINEERING MATHEMATICS-III
B TECH 3rd SEMESTER (CL/EE/ME)
Credits and Hours:
Teaching Scheme Theory Practical Total Credit
Hours/week 4 - 4
4
Marks 100 - 100
A. Outline of the course:

Sr. Title of the Unit Minimum number of
No. hours
1. Fourier Series and Its Applications 15
2. Laplace Transform and Its Applications 15
3. Vector Differential Calculus 10
4. Vector Integral Calculus 12
5. Curve Fitting 08
Total hours: 60
B. Detailed Syllabus:
1. Fourier Series and Its Applications: 15 Hours 25%
1.1 Periodic functions, Dirichlets conditions, Trigonometric
series.
1.2 Euler formulae, Fourier series of periodic function of period p.
1.3 Fourier series: Discontinuous functions, Even and odd
functions.
1.4 Half range Fourier series.
1.5 Solutions of heat, wave, Laplace equations by method of
separation of variables and Fourier series.
2. Laplace Transform and Its Applications: 15 Hours 25%
2.1 Laplace transform as an improper integral and its existence.
2.2 Laplace transform of elementary functions and its properties.
2.3 Inverse Laplace transform and its properties.
2.4 First and second shifting theorems. Laplace transform of
derivatives and integrals.
2.5 Convolution theorem and its application to obtain inverse

Laplace transform.
2.6 Laplace transform of periodic functions, Unit step function,
Unit impulse function (Dirac delta function).
2.7 Solving differential equations using Laplace transform.
2.8 Applications of ODE : Mechanical vibration system,
deflection of beams.
3 Vector Differential Calculus: 10 Hours 17%
3.1 Revision of concepts of Vector algebra, Scalar and Vector
fields.
3.2 Gradient of a scalar functions, Directional derivatives.
3.3 Divergence and Curl of a vector field and their properties.
3.4 Physical interpretations of gradient, divergence and curl.
Irrotational and Solenoidal vector fields.
3.5 Scalar potential function.
4 Vector Integral Calculus: 12 Hours 20%
4.1 Introduction to line integrals and examples.
4.2 Statement and examples of Green’s theorem.
4.3 Introduction to Surface and Volume integrals.
4.4 Statements and examples of Stokes' and Gauss’ divergence
theorem.
5 Curve Fitting: 08 Hours 13%
5.1 Normal equations.
5.2 Fitting a straight line: 𝒚 = 𝒂 + 𝒃𝒙 (linear regression).
5.3 Fitting a parabola: 𝒚 = 𝒂 + 𝒃𝒙 + 𝒄𝒙𝟐 .
5.4 Fitting a curve by transformation: y = abx, xya = b, y = axb.
C. Course Outcome :
At the end of the course, the students will be able to
CO1 Represent continuous time periodic signals using concepts of Fourier series and
determine the solution of complex engineering problems heat, wave and Laplace's
equations using it.
CO2 Classify and apply the necessary Laplace transform and inverse Laplace transform
techniques to solve ordinary differential equations of real world problems.
CO3 Differentiate the dot product, cross product, length of vectors, partial derivatives,
derivatives of vector-valued functions, gradient functions and these tools are
employed successfully in different branches of engineering and physics.
CO4 Analyze parameterize curves and calculate line integrals using them and Use vector
operators and implement into surface integrals, Classify and examine the Green,
Stokes and Divergence theorem
CO5 Appraise the Least squares fitting method of data approximation and Discuss the
concept of curve fitting of different types of curves using specific data
Course Articulation Matrix (ME/CL):
PO PO PO PO PO PO PO PO PO PO PO PO PSO PSO PSO

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 1 1 1 - 1 - - 1 - 1 2 2 -
CO2 3 2 1 1 1 - 1 - - 1 - 1 2 2 -
CO3 3 2 2 1 1 - 1 - - 1 - 1 2 2 -
CO4 3 2 2 1 1 - 1 - - 1 - 1 2 2 -
CO5 3 3 2 2 2 - 1 - - 1 - 1 2 2 -
 Enter correlation levels 1, 2 or 3 as defined below:

 1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High)
 If there is no correlation, put “-”
D. Recommended Study Material:

Text Books:
1. Erwin Kreyszig; Advanced Engineering Mathematics, 9th Ed., Jhon Wiley & Sons,
India, 1999.
2. Shankar S. Sastry; Introductory methods of numerical analysis. PHI Learning Pvt.
Ltd., 2015.
Reference Books:
1. Ahsaan, Zafar; Differential equations and their applications. PHI Learning Pvt.
Ltd., 2004.
2. Stewart James; Calculus Early Transcendental, 5th Ed., Thomson India, 2007.
3. Wylie & Barrett; Advanced Engineering Mathematics, Mc graw Hill pub., 1982.
4. M. D. Greenberg; Advanced Engineering Mathematics, 2nd ed., Pearson. 1998.
5. B. S. Grewal; Higher engineering mathematics. Khanna Publisher, New Delhi,
1996.
6. H. K. Dass; Advanced engineering mathematics. S. Chand, 2008.
7. Debnath, Lokenath, and Dambaru Bhatta. Integral transforms and their
applications. CRC press, 2014.
8. Kenneth A. Stroud and Dexter J. Booth. Advanced engineering mathematics.
Palgrave Macmillan, 2011.
Web Materials:
1. http://mathworld.wolfram.com
2. http://en.wikipedia.org/wiki/Math

CL241: GEOLOGY FOR CIVIL ENGINEERS
B TECH 3RD SEMESTER (CIVIL ENGINEERING)
Credits and Hours:

Hours/week 4 2 6
5
Marks 100 50 150
A. Outline of the Course:

Sr. No. Title of the Unit Minimum
Number of Hours
1 Physical Geology 17
2 Natural Materials 13
3 Structural Geology 12
4 Engineering Geology 18
Total Hours (Theory): 60
Total Hours (Lab): 30
Total Hours: 90
1 Physical Geology 17 Hours 28%
1.1 Earth: 3
Origin, internal structure.
1.2 Work of natural agencies: 7
Lakes, Oceans, Atmosphere, wind, streams, sea, glacier, mass
movements
1.3 Plate tectonics: 2
Concepts and plate boundaries
1.4 Earthquakes: 5
Basics of earthquake, intensity and magnitude, causes, Earthquake
zones of India
2 Natural Materials 13 Hours 22%
2.1 Minerals: 5
Formation, Identification and Use:

Physical properties of minerals; basics of optical mineralogy, SEM,
XRD
2.2 Rocks: 8
Types of rock and origin:
Igneous (extrusive and intrusive), sedimentary and metamorphic
Igneous Rock:
Agents, structure, texture, IUGG classification of intrusive and
extrusive rocks
Metamorphic Rock :
Causes of metamorphism (stress, temperature, tectonism, pore
fluid), structure and texture
Sedimentary Rock:
Sedimentation environments, structure, textural classification of
siliciclastic and carbonate rock
3 Structural Geology 12 Hours 20%
3.1 Introduction: 2
Outcrop, stratification, dip and strike relation
3.2 Study of Structural Features: 10
Fold, Fault, Joints and Unconformities; Classification, formation
and Identification
4 Engineering Geology 18 Hours 30%
4.1 Geologic Mapping: 3
Various methods of geological investigations, mapping, preparation
of geologic sections Interpretation of reports.
4.2 Indian geology: 2
Geological framework of India, Geology of Gujarat
4.3 Ground water: 2
Basics and engineering difficulties
4.4 Geology for Site selection: 6
Dam, Tunnel, Reservoir and Highways
4.5 Case studies: 5
Important international and Indian examples of failures of civil
structures due to geological constrains.

C. Course Outcomes:
On the successful completion of this course:
CO1 The student will have basic understanding of Geology, natural materials
such as minerals and rocks, use of rocks and minerals and availability of
rocks and mineral.
CO2 The student will have basic understanding of Geological framework of India
and Gujarat.
CO3 The student will be able to analyse geological maps and process of resolving
geological issues in civil engineering projects.
CO4 The student will be able to apply the knowledge of natural dynamic process,
and other geological factors while taking decision on civil engineering
constructions.
Course Articulation Matrix:

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 - 1 1 - 1 2 - - - - 1 1 1 1
CO2 3 - 1 1 - 1 2 - - - - 1 1 1- 1
CO3 3 1 1 1 - 1 2 - - - - 1 1 1 1
CO4 3 1 1 1 - 1 2 - - - - 1 1 1 1
1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High) No correlation “-”

Text Books:
1. Prabin Singh, Engineering & General Geology, and S.K. Kataria & Sons, Katson
Books,1999, New Delhi
2. Kesavulu, C., Textbook of Engineering Geology, Macmillan India Ltd, 1993, New Delhi
Reference Books:
1. Bangar, K.M., Principles of Engineering Geology, Standard Publishers Distributors,
1995, New Delhi
2. Billings, M.P., Structural Geology, Prentice-Hall India, 1974, New Delhi
3. Blyth, F.G.H. and DE’Freits, M.H. Geology for Engineers. ELBS, 1974, London

4. Gokhale, K.V.G.K. and Rao, D.M., Experiments in Engineering Geology, Tata
McGraw Hill, 1981, New Delhi
5. Reddy, V., Engineering Geology for Civil Engineers, Oxford & IBH, 1997, New Delhi
6. Parthasarathy, A., Panchapakesan, V. and Nagarajan, R. "Engineering Geology", Wiley
India Pvt Ltd., 2013. ISBN-13: 9788126541829
7. Reddy, D. V. "Engineering Geology", Vikas Publishing House, 2010. ISBN13:
9788125919032
8. Krynine, D.P. and Judd, W.R. "Principles of Engineering Geology and Geotechnics",
CBS Publishers & Distributors, New Delhi, 1957. ISBN-10: 812390603X.
Web Materials:
1. http://nptel.ac.in/courses/105105106/
2. http://freevideolectures.com/Course/87/Engineering-Geology
3. http://www.cosmolearning.com/courses/engineering-geology/video-lectures/
4. http://geology.about.com/

LIST OF EXPERIMENTS
Sr.
Name of Experiment
No.
1 Fundamentals of Geology
2 Study of Minerals
Study of Physical Properties of Minerals
Identification Rock Forming Minerals by Studying Physical Properties
Identification Ore Minerals by Studying Physical Properties
3 Study of Rocks
Study of Igneous Rocks
Study of Sedimentary Rocks
Study of Metamorphic Rocks
4 Geological Mapping
Map of layered horizontal beds
Map of layered inclined beds
Map of layered inclined beds
Map of Unconformity with Inclined and Horizontal Bed Series
Map of Faulted Sequence
Map of Folded Sequence
Various Combination Maps for General Practice

CL242: SURVEYING
Credits and Hours:

Hours/week 4 2 6
5
Marks 100 50 150
A. Out Line of the Course:

Sr. No. Title of the Unit Minimum Number of
Hours
1 Measurement of Elevation, Contouring 5
2 Theodolite Traversing 10
3 Plane Table Surveying 10
4 Engineering Curves 10
5 Computation of Areas and Volumes 10
6 Hydrography 5
7 Setting Out Works 5
8 Modern Surveying Instruments 5
Total hours (Theory): 60 Hours
Total hours (Lab): 30 Hours
Total hours: 90 Hours
1 Measurement of Elevation, Contouring 05 Hours 08%

1.1 Profile levelling and cross sectioning & contouring
1.2 Errors in levelling
1.3 Permanent adjustment of level.
2 Theodolite Surveying 10 Hours 17%

2.1 Introduction to vernier transit theodolite
2.2 Temporary and permanent adjustment of theodolite
2.3 Measuring horizontal and vertical angles
2.4 Computation of latitudes and departure & gale’s table

2.5 Methods of traversing, closing error
2.6 Check in closed and open traverse, balancing of traverse
2.7 Area of traverse, omitted measurement, co-ordinate method
3 Plane Table Surveying 10 Hours 17%

3.1 Introduction
3.2 Principle
3.3 Advantages & limitation
3.4 Accessories of plane tabling
3.5 Setting up the plane table
3.6 Methods of plane table surveying
3.7 Sources of errors
4 Engineering Curves 10 Hours 17%
4.1 Introduction to engineering curves
4.2 Classification & elements of simple circular curve
4.3 Methods of setting out a simple circular curve
4.4 Elements of compound curve & reverse curve
4.5 Transition curve & vertical curve
5 Computation of Areas and Volumes 10 Hours 17%
5.1 Different methods to compute area of traverse
5.2 Determining areas from plans, trapezoidal rule- Simpson’s rule
5.3 Planimeter, digital planimeter
5.4 Computation of volumes, volume from cross sections
5.5 Trapezoidal and prismoidal formulae
5.6 Prismoidal correction, curvature correction
5.7 Determination of capacity of reservoir and volume of borrow pits
6 Hydrography 05 Hours 08%
6.1 Introduction
6.2 Purposes, control points
6.3 Soundings
6.4 Instruments and methods of locating soundings
7 Setting Out Works 05 Hours 08%

7.1 Introduction

7.2 Setting out the buildings
7.3 Setting out the sewer grades
7.4 Setting out the bridge & culvert
8 Modern Survey Instruments 05 Hours 08%

8.1 Introduction
8.2 Electromagnetic distance measurement
8.3 Electronic theodolite
8.4 Total station
C. Course Outcomes :
CO1 Carry out elevation measurement and prepare contour maps.
CO2 Plan theodolite survey applications.
CO3 Measure and Plot maps with plane table.
CO4 Set out curves, buildings, culverts and tunnels
CO5 Compute ground areas and earthwork volumes
CO6 Carry out basic hydrographic survey and invoke application of modern surveying
instruments over conventional instruments.

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 1 - 2 - - - 2 1 - 1 3 1 2
CO2 1 2 1 - 3 - - 1 - 1 - 2 1 2 2
CO3 1 - - - - - - - 1 1 - - - - 1
CO4 3 2 2 - - 1 - - 1 - - 2 1 - 2
CO5 3 2 2 1 - - 1 - - 1 - 1 2 1 2
CO6 1 - 2 - 3 - - - 1 3 2 2 2 2 3

Text Books
1. Duggal, S. K., Surveying Vol. I & II, Tata Mcgraw Hill, New Delhi
2. Subramanian, R., Surveying & Levelling, Oxford University Press, New Delhi

Reference Books:
1. Punamia, B.C., Surveying Vol. I, II & III, Laxmi Publications
2. Kanetkar, T.P. and Kulkarni, S.V., Surveying and Levelling Vol. I & II, Pune
Vidhyarthi Gruh
3. Arora, K.R., Surveying Vol. I, II & III, Standard Book House. New Delhi
4. Basak, N.N., Surveying and Levelling, Tata Mcgraw Hill, New Delhi
5. Agor, R., Surveying and Levelling, Khanna Publishers, New Delhi
Web Materials:
1. http://nptel.iitm.ac.in/courses/Webcourse-contents/IIT-ROORKEE/SURVEYING
2. http://nptel.iitm.ac.in/courses/Webcourse-contents/IITROORKEE/
SURVEYING/home.htm
3. http://nptel.iitm.ac.in/courses.php?branch=Civil

CL243: MECHANICS OF SOLIDS
Credits and Hours:

Hours/week 4 2 6
5
Marks 100 50 150
A. Out Line of the Course:

Sr. Title of the Unit Minimum Number of
No. Hours
1 Introduction 3
2 Simple Stresses and Strains 15
3 Principal Stresses and Strains 10
4 Shear Force and Bending Moment 10
5 Moment of Inertia 6
6 Bending and Shear Stresses in Homogeneous and 10
Composite Beam Sections
7 Strain Energy 6
Total hours (Theory): 60 Hours
Total hours (Lab): 30 Hours
Total hours: 90 Hours
1 Introduction 03 Hours 05%
1.1 Introduction to mechanics of deformable bodies
1.2 Principle of superposition
1.3 Classification of loaded bar
1.4 Gradual, sudden, impact and shock loading
1.5 Mechanical properties of materials
2 Simple Stresses and Strains 15 Hours 22%

2.1 Stress and types of stress, Strain and types of strain
2.2 Stress strain Characteristics for ductile and brittle materials
2.3 Shear stresses and strains, Elasticity, Hook’s law
2.4 Axial and shear deformations, Axial force diagram
2.5 Bars of varying section, Bars of uniformly varying cross section
2.6 Analysis of stress for statically determinate structures and
indeterminate structures
2.7 Poisson’s ratio, Volumetric strain, Biaxial and tri-axial
deformations
2.8 Elastic constant and relation between three elastic constants
2.9 Stresses due to thermal effect
3 Principal Stresses and Strains 10 Hours 18%
3.1 Introduction, Sign convention
3.2 Transformation of stresses for a state of stresses under axial
loading
3.3 Transformation of stresses for plate under biaxial loading
3.4 Principal plane and principal stresses
3.5 Maximum shear stress, Element subjected to principal stresses
3.6 Mohr’s circle for stresses on an oblique section of a body
subjected to direct stress in one plane and two plane with or
without shear stress,
3.7 Pure shear
4 Shear Force and Bending Moment 10 Hours 22%
4.1 Concept of shear force and bending moment
4.2 Sign conventions
4.3 Relation between bending moment, shear force and rate of
loading
4.4 Bending moment and shear force diagrams for statically
determinate beams subjected to all different types of loading
Important points for shear force and bending moment diagram.

5 Moment of Inertia 6 Hours 12%
5.1 Introduction, Radius of gyration
5.2 Parallel axis theorem and perpendicular axis theorem
5.3 Polar moment of inertia
5.4 Moment of inertia by integration
5.5 Moment of inertia of composite areas
6 Bending and Shear Stresses in Homogeneous and composite 10 Hours 14%
beam sections
6.1 Pure bending, Theory of pure bending
6.2 Assumptions and derivation of theory of simple bending
6.3 Neutral axis, moment resistance, section modulus
6.4 Strength of section
6.5 Bending stress in symmetrical, unsymmetrical and composite
sections
6.6 Shear stresses, Shear flow
6.7 Shear stress distribution for various cross section
7 Strain Energy 06 Hours 07%
7.1 Elastic strain energy due to gradual loading, sudden loading,
impact loading, shear and bending, Resilience
C. Course Outcomes

CO1 Classify and determine the strength parameters of materials and compute stresses &
strains for structural elements due to normal, shear loads and temperature changes.
CO2 Calculate bending moment and shear force for statically determinate beams and draw
the distributions.
CO3 Calculate the cross sectional moment of inertia using the parallel axis theorem.
CO4 Analyse stresses in a beam under combined loadings and also Calculate bending stress,
shear stress and their distribution at any desired location along the beam elements.
CO5 Evaluate the different mechanical properties of materials and also Calculate strain
energy due to different loadings.


1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 1 - - - - - - - - - - 2 2 -
CO2 3 2 2 - 1 - - - - - - - 2 - -
CO3 3 2 1 - - - - - - - - - 2 1 -
CO4 3 2 2 - - - - - - - - - 2 1 -
CO5 3 2 2 - - - - - - - - - 2 1 -
Text Books:
1. Junarkar, S.B. & Shah, H.J., Mechanics of Structures Vol-I, Charotar Publishing
House
2. Shah, H. J., Mechanics of Solids, Charotar Publishing House
3. Khurmi R. S., Strength of Materials, S. Chand Publications
4. S. S. Bhavikatti, Strength of Materials, Vikas Publishing House Pvt. Ltd
5. Hibbeler, R.C., “Mechanics of Materials”, 6th SI edition
Reference Books:
1. Beer and Johnston, Mechanics of Materials
2. Gere & Timoshenko, Mechanics of Materials, CBS Publishers & Distributors,
Delhi
3. S. Timoshenko, Strength of Materials (Part -1), D. Van Nostrand Company, Inc.
4. R. Subramanian, Strength of Materials, Oxford University Press
5. S. S. Rattan, Strength of Materials, Tata McGraw Hill Education Pvt. Ltd.
6. R. K. Bansal, Strength of Materials, Lakshmi Publications House Pvt. Ltd.
E Books:
1. Barry Dupen, Applied Strength of Materials for Engineering Technology
2. S. Timoshenko, Strength of Materials (Part -1), D. Van Nostrand Company, Inc

Web Materials:
1. http://nptel.iitm.ac.in/courses/Webcourse-contents/IIT-
Delhi/Mechanics%20Of%20Solids/index.htm
2. http://nptel.ac.in/video.php?subjectId=112107147
3. https://www.youtube.com/watch?v=GkFgysZC4Vc
4. http://nptel.ac.in/syllabus/112106141/
5. http://nptel.ac.in/courses/Webcourse-contents/IIT-
Delhi/Mechanics%20Of%20Solids/index.htm

HS121.02 A: CREATIVITY, PROBLEM SOLVING AND INNOVATION
B TECH 3RD SEMESTER (UNIVERSITY ELECTIVE)
Credits and Hours:
Teaching Scheme Theory Practical Tutorial Total Credit
Hours/week -- 30/15 -- 30/15

2
Marks -- 100 -- 100
Pre-requisite courses:
Creative Problem Solving
https://www.coursera.org/learn/creative-problem-solving

Sr. Title of the unit Minimum number
No. of hours
1. Introduction to Creativity, Problem Solving and Innovation 06
2. Questioning, Learning and Visualization 06
3. Creative Thinking and Problem Solving 06
4. Logic, Language and Reasoning 06
5. Contemporary Issues and Practices in Creativity and
Problem Solving
Total hours (Theory) : --
Total hours (Practical): 30
Total hours (Lab) : --
Total hours : 30
1. Introduction to Creativity, Problem Solving and Innovation 06 Hours 20%
Definitions of Creativity and Innovation, Need for Problem
Solving and Innovation, Scope of Creativity in various Domains,
Types and Styles of Thinking, Strategies to develop Creativity,
Problem Solving and Innovation skills
2. Questioning, Learning and Visualization 6 Hours 20%

Strategy and Methods of Questioning, Asking the Right
Questions, Strategy of Learning and its Importance, Sources and
Methods of Learning, Purpose and Value of Creativity Education
in real life, Visualization strategies - Making thoughts Visible,
Mind Mapping and Visualizing Thinking
3. Creative Thinking and Problem Solving 6 Hours 20%
Creative Thinking and its need, Strategy of Thinking Fluency,
Generating all Possibilities, SCAMPER Technique, Divergent Vs
Convergent Thinking, Lateral Vs Vertical Thinking, Fusion of
Ideas for Problem Solving, Applying strategies for Problem
Solving
4. Logic, Language and Reasoning 6 Hours 20%
Basic Concepts of Logic, Statement Vs Sentence, Premises Vs
Conclusion, Concept of an Argument, Functions of Language:
Informative, Expressive and Directive, Inductive Vs Deductive
Reasoning, Critical Thinking & Creativity, Moral Reasoning
5. Contemporary Issues and Practices in Creativity and Problem 6 Hours 20%
Solving
Cognitive Research Trust Thinking for Creatively Solving
Problems, Case Study on Contemporary Issues and Practices in
Creativity and Problem Solving
C. Course Outcome :
CO1 Demonstrate creativity in their day to day activities and academic output.
CO2 Solve personal, social and professional problems with a positive and an objective
mindset.
CO3 Think creatively and work towards problem solving in a strategic way.
CO4 Initiate new and innovative practices in their chosen field of profession.
CO5 Give logical ideas, opinions, and solutions to problems.
CO6 Think critically over the situation and drawing conclusion.


1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 - 3 - - 1 1 - - - 2 - 1 1 - -
CO2 - 3 2 1 - - - 1 1 1 - 1 - 1 -
CO3 - 2 2 1 - - - - - - - - - - -
CO4 1 - 1 - - - 2 - - - - - 1 - -
CO5 - 1 - 1 - - - - 1 3 - 1 - 1 -
CO6 - - - 2 - - - - - - 2 - 1 - -

 Text book:
1. R Keith Sawyer, ZigZag, The Surprising Path to Greater Creativity,Jossy-Bass
Publication 2013
2. Michael Michalko, Crackling Creativity, The Secrets of Creative Genus, Ten
Speed Press 2001
 Reference book:
1. Michael Michalko, Thinker Toys, Second Edition, Random House Publication 2006
2. Edward De Beno, De Beno’s Thinking Course, Revised Edition, Pearson Publication
1994
3. Edward De Beno, Six Thinking Hats, Revised and Update Edition, Penguin
Publication 1999
4. Tony Buzan, How to Mind Map,Thorsons Publication 2002
5. Scott Berkum, The Myths of Innovation, Expended and revised edition, Berkun
Publication 2010
6. Tom Kelly and David Kelly, Creative confidence: Unleashing the creative Potential
within Us all, William Collins Publication 2013
7. Ira Flatow, The all Laughed, Harper Publication 1992
8. Paul Sloane, Des MacHale& M.A. DiSpezio, The Ultimate Lateral & Critical
Thinking Puzzle book,Sterling Publication 2002
 Additional Readings
1. Keith Sawer, Group Genius, The Creative Power of Collaboration, Basic Books
Publication 2007
2. Edward De Beno, Lateral Thinking, Creativity Step by Step, Penguin Publication
1973
3. Nancy Margulies with Nusa Mall, Mapping Inner Space, Crown House
Publication 2002
4. Tom Kelly with Jonathan Littman,The Art of Innovation, Profile Publication 2001
5. Roger Von Oech,A Whack on the Side of the Head. Revised edition, Hachette
Publication 1998
6. Roger Von Oech, A Kick in the Seat of the Head, William Morrow 1986
7. Jonah Lehrer,Imagine How Creativity Works,Canongate Books Publication 2012
8. James M Higgins, 101 Creative Problem Solving Techniques, New Management
Publication1994
9. Soctt G Isaksen, K Brain Doval, Donald J Treffinger,Creative Approach to
Problem Solving, Sage Publication 2000
10. Donald J Treffinger, scott G Isaksen, K Brain stead Dorval Creative Problem
Solving An Introduction,Prufrock Press 2006
11. H Scott Fogler& Steven E. LeBlance,Strategies for Creative Problem
Solving,Prentice Hall Publication 2008
12. Dave Gray, Sunni Brown and James Macanufo, Game Storming, O'reilly
Publication 2010.
13. Howard Gardner, Creating minds,Basic Books Publication 1993
14. MihalyCsikzentmihalyi, Creativity–Flow and Psychology of Discovery and
Invention,Harper Publication 1996
15. Martin Gerdner,W. H.,Ahal Insight,Freeman Publication 1978
16. Paul Sloane,Test Your Lateral Thinking IQ,Sterling Publication1994
17. Paul Sloane & Des Machale Intriguing, Lateral Thinking Puzzles,Sterling
Publication 1996
 Web material:
1. Internet Search based May TED talks and other sources for videos, slide shares,
problems, etc

SYLLABI
(Semester – 4)

CL244: FLUID MECHANICS- I
B TECH 4THSEMESTER (CIVIL ENGINEERING)
Credits and Hours:

Hours/week 4 2 6
5
Marks 100 50 150

Number of Hours
1 Properties of Fluid 4
2 Fluid Statics 10
3 Fluid Kinematics 9
4 Fluid Dynamics 8
5 Measurement of Flow 8
6 Flow Through Pipes 9
7 Open Channel Flow 10
8 Introduction to the Hydraulic machinery 2
Total Hours: 90
1 Properties of Fluid 04 Hours 7%

1.1 Types of Fluid
1.2 Fluid properties
1.3 Fluids as a continuum
1.4 Control volume concept
1.5 Viscometers
2 Fluid Statics 10 Hours 17%
2.1 Pressure and it’s measurement

2.2 Pascal’s law, hydrostatic pressure, atmospheric, absolute, gauge
and vacuum pressure
2.3 Pessure measurement through piezometer and manometer
2.4 Total pressure, intensity of pressure, centre of pressure, Pressure
on horizontal, vertical, inclined and curved surface
2.5 Floating Bodies, Buoyancy and centre of buoyancy, meta centre
and meta centre height
2.6 Condition of equilibrium of floating and submerged body,
determination of meta-centric height by experimental and
analytical method, stable and unstable equilibrium, pressure in
case of accelerated rigid body motion
3 Fluid Kinematics 09 Hours 15%
3.1 Types of fluid motion, methods of describing fluid flow -
Langrangian and Eulerian method
3.2 Inviscid flows, velocity and acceleration, flow rate
3.3 Continuity equation
3.4
Potential flows, flow lines, velocity potential and stream function
3.5 Flownet its characteristic and utility, circulation and vorticity

4 Fluid Dynamics 08 Hours 13%
4.1 Energy processed by a fluid body, Types of forces, Forces
influencing fluid motion, head-energy correction factor
4.2 Euler and Bernoulli’s equations, application of Bernoulli’s equation
4.3 Flow measurement, momentum of fluid in motion, momentum
equation and momentum correction factor
4.4 Application of momentum equation, forces on a pipe bend, free
jets
5 Measurement of Flow 08 Hours 13%
5.1 Orifice & Mouth piece Classification, hydraulic coefficients,
experimental determination of hydraulic coefficient, discharge
through all types of office & mouthpiece, time of emptying the
tank through orifice and mouthpiece

5.2 Notches and Weirs Classification, discharge through various types
of Notches and weirs, time of emptying a reservoir or a tank with
notches & weirs
5.3 Venturimeter
5.4 Nozzles and Bendmeter
6 Flow Through Pipes 09 Hours 15%
6.1 Introduction
6.2 Major and minor losses of energy in pipes, hydraulic gradient, total
energy line
6.3 Pipes in series and parallel, flow through branched pipes
6.4 Hydraulic transmission of power
6.5 Water hammer and its effects
7 Open Channel flow 10 Hours 17%
7.1 Comparison between pipe flow and open channel flow
7.2 Classification of open channel flow
7.3 Uniform flow – Chezy’s formula
7.4 Manning’s formula- numerical
7.5 Hydraulically efficient channel cross section
7.6 Rectangular section
7.7 Trapezoidal section and circular section
8 Introduction to the Hydraulic machinery 2 Hours 3%
8.1 Introduction to various types of Turbines and hydraulic pumps,
Hydraulic press - hydraulic accumulator - Hydraulic ram
8.2 Working principle, discharge calculations and use of and
machines Centrifugal pumps
C. Course Outcomes (COs):

CO1 Determine the properties of fluid and pressure and their measurement.
CO2 Apply continuity equation and energy equation in solving problems on flow through
conduits.
CO3 Compute the frictional loss in laminar and turbulent flows.

CO4 Design open channels for most economical sections like rectangular, trapezoidal and
circular sections.
CO5 Select the type of pumps and turbine required with reference to available head of
water and discharge.

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 - 2 - - - - - - - 2 1 - -
CO2 3 3 2 - - - - - - 1 - 2 1 - -
CO3 2 2 1 - - - - - - - - 1 1 - -
CO4 3 3 2 1 - - - - - 1 - 2 2 - 2
CO5 3 1 - - - 1 - - - - - 2 1 - 1

Text Books:
1. Jain, A.K., Fluid Mechanics, Khanna Publishers, New Delhi
2. Bansal, R.K., Fluid Mechanics, Laxmi Publications
Reference Books:
1. Streeter, V.L. and Wylie, E.B., Fluid Mechanics, McGraw Hill, 1985, New York
2. Subramanya, K., Theory and Applications of Fluid Mechanics, Tata-McGraw Hill
Publishing Co., 1993, New Delhi
3. Shaughnessy, E.J., Katz, I.M. and Schaffer, J.P., Introduction to Fluid Mechanics, SI
edition, 2005, Oxford University Press, New Delhi
4. White, F.M. Fluid Mechanics, McGraw Hill, New York
5. Kumar, D.S., Fluid Mechanics, S.K.Kataria & Sons
6. Rajput, R.K., Fluid Mechanics, S. Chand & Co. publications
7. Modi, P.N. and Sheth, Fluid Mechanics & Hydraulic Machines, Standard Book
House
8. Ramamurtham, S., Hydraulic Fluid Mechanics & Fluid Machines, Dhanpatrai
Publishing Co.
9. Garde, R.J. and Mirajgaoker, A.C., Engineering Fluid Mechanics, New Chand &
Sons

Web materials:
1. http://www.msubbu.in/ln/fm/

CL245.01: BUILDING CONSTRUCTION TECHNOLOGY
B TECH 4TH SEMESTER (CIVIL ENGINEERING)
Credits and Hours:

Hours/week 3 2 5
4
Marks 100 50 150

Sr. Minimum
Title of the Unit
No. Number of Hours
1 Masonry Works 09
2 Foundations 07
3 Doors, Windows & Ventilators 05
4 Stairs and Staircases 05
5 Floors and Floorings 05
6 Roofs and Roof Coverings 05
7 Wall Finishes 04
8 Temporary Works 05
Total Hours: 75
1 Masonry Works 09 Hours 20%

1.1 Stone masonry:
Technical terms; materials used; classification – random rubble,
square rubble, Ashlar fine tooled, Ashlar
chamfered; joints
1.2 Brick masonry: Technical terms; bonds in brick work – stretcher,
header, English, Flemish, Raking; pointing – method and types

1.3 Composite masonry: Brick-stone composite masonry - properties
and uses; Concrete masonry – hollow concrete blocks, Autoclaved
aerated concrete (AAC), Advantages and Disadvantages over other
cement construction materials; Reinforced brick masonry
2 Foundations 07 Hours 16%
2.1 Classification, Necessity, essential requirements
2.2 methods of site exploration
2.3 Settlement, causes of failures of foundation and remedial measures
2.4 Bearing capacity of soils
2.5 Shallow foundations: Depth of footing, types and construction,
design of strip footing
3 Doors, Windows & Ventilators 05 Hours 11%
3.1 Doors: Location, technical terms, door frames, types of doors –
construction, suitability - panelled, glazed, flushed doors,
collapsible steel doors
3.2 Windows: Types of windows–construction, suitability -
Casement, Sash, and Skylight windows
3.2 Ventilators: Ventilators combined with window; fan light
fixtures and fastenings
4 Stairs, Staircases and escalators 05 Hours 11%
4.1 Technical terms, requirements of good stair
4.2 Dimensions of a step, types of steps, classification of stairs
4.3 Design of stair, example – stair planning, elevators, escalators
5 Floors and Floorings 05 Hours 11%
5.1 Components of a floor
5.2 Flooring material and factors affecting selection of flooring
material
5.2 Types of ground floors –cement concrete, tiles, marble, timber etc.,
Recent Developments in Flooring Technology
5.3 Types of upper floors –Conventional floors (timber, steel joist),
reinforced cement concrete & pre-cast concrete floors
6 Roofs and Roof Coverings 05Hours 11%
6.1 Requirements of a good roof, technical terms
6.2 Types of roofs – single, trussed, steel roof trusses
6.3 Types of roof covering –G.I. Sheets, light weight roofing,
Flat terraced roof – advantages, disadvantages, types, Water
proofing techniques in flat roofs.
7 Wall Finishes 04 Hours 09%
7.1 Plastering: Objectives, requirements, terms, tools, cement
plaster, special materials used in plastering, defects
7.2 Painting: Painting on different surfaces, defects, Recent
Developments in painting technology
8 Temporary Works 05 Hours 11%
8.1 Timbering in trenches
8.2 Component and types of scaffolding
8.3 Formwork
C. Course Outcomes:
On the successful completion of this course, the students will be able to:
CO1 Understand the types, dimensions and method of construction of various

building components along with various checks required for their construction.
CO2 Identify, select and recommend appropriate type of building elements suitable
for a particular situation.
CO3 Select and recommend appropriate temporary structures suitable for various
building construction needs.
CO4 Select and recommend appropriate mode of vertical movements and design of
staircase
CO5 Design strip footing type of shallow foundation.


1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 - - - 1 - - - - - - - 1 - 2
CO2 1 2 - 1 - - - - - - - 1 1 - 2
CO3 1 1 - 1 1 - - - - - - - 1 - 1
CO4 1 1 3 - 1 - - - - - - - 1 - 1
CO5 1 - 3 - - - - - - - - - 1 - 1
Text Books:
1. Punamia, B.C., Building Construction, Laxmi Publication, New Delhi
2. Sushil Kumar, Building Construction, Standard Publishers Distributors, NewDelhi
3. Rangwala, S.C., Building Construction, Charotar Publishing House Pvt. Ltd., Anand
Reference Books:
1. Varghese, P.C., Building Construction, Prentice-Hall of India (PHI) Learning Pvt.
Ltd., New Delhi
2. Roy Chudley & Roger Greeno, Construction Technology, Prentice Hall
3. Roy Chudley & Roger Greeno, Building Construction Handbook, Routledge
Publications
4. Francis D. K. Ching, Building Construction Illustrated, Wiley Publications
5. Edward Allen & Joseph Iano, Fundamentals of Building Construction: Materials and
Methods, Wiley Publications
6. National Building Code of India, Indian Standard Institution ( ISI ), 2005, NewDelhi
Web Materials:
2. https://www.youtube.com/watch?v=fDUD36VPD_U
3. https://www.youtube.com/watch?v=wmRYKrfQjuk

LIST OF TUTORIALS
Sr. No. Topic

1. Masonry work
A) Stone masonry work
2. Masonry work
B) Brick masonry work
3. Foundations -Shallow Foundation
4. Doors, Windows & Ventilators
5. Stairs and Staircases

6. Floors and Flooring
7. Roofs and Roof Coverings
8. Temporary Works

CL246.01: STRUCTURAL ANALYSIS -I
B TECH 4TH SEMESTER (CIVIL ENGINEERING)
Credits and Hours:

Hours/week 3 2 5
4
Marks 100 50 150
A. Outline of the Course

Number of Hours
1 Introduction 04
2 Slope and Deflection of Statically Determinate Beams 09
3 Combined Direct and Bending Stresses 06
4 Columns and Struts 06
5 Influence Line for Determinate Beams 10
6 Torsion in Circular Shafts 04
7 Arches 06
Total Hours: 75
1. Introduction 04 Hours 10%
1.1 Concepts of Structural Analysis
1.2 Idealization of structures
1.3 Static indeterminacy and kinematic indeterminacy
2 Slope and Deflection of Statically Determinate Beams 09 Hours 20%
2.1 Differential Equation of the Elastic Curve, Relationship
of slope deflection with radius of curvature, bending
moment, shear force and load intensity

2.2 Relation between Moment, Slope and Deflection using
fundamental, Macualay's Method (Method of
Singularity Function), Moment Area Method,
Conjugate Beam Method
3 Combined Direct and Bending Stresses 06 Hours 13%
3.1 Eccentric Loading along One Principle Axis
3.2 Middle Third Rule, Kernal (Core) of Section
3.3 Column Subjected to Biaxial Bending
3.4 Structures Subjected to Lateral Pressure
4 Columns and Struts 06 Hours 13%
4.1 Buckling of Columns, different end conditions
4.2 Euler’s Theory, Equivalent Length
4.3 Applicability and limitations of Euler’s Formula
4.4 Rankine’s Formula
5 Influence Line for Determinate Beams 10 Hours 22%
5.1 Uses of influence lines, Various Types of Loading
5.2 Influence lines for statically determinate beams under
moving loads
5.3 Influence lines for support reactions, shear force &
bending moment for uniformly distributed load and
several point loads
5.4 Criteria for maximum effects
6 Torsion in Circular Shafts 04 Hours 9%
6.1 Assumption for shear stress in a circular shaft subjected
to torsion
6.2 Torsion Stress and Strain, Torsion Formula
6.3 Power Transmitted by Shaft
6.4 Design of Shaft: Shafts of Uniform Section, Shaft of
Varying Section, Coupling and Keys
7 Arches 06 Hours 13%
7.1 Arches as structural forms – Examples of arch
structures, Types of arches
7.2 Analysis of three hinged - parabolic and circular arches

On the successful completion of this course students will be able to
CO1 Identify the stability and determinacy of planar structures.
CO2 Calculate deflections for statically determinate beams using different methods of
analysis.
CO3 Analyses the columns with different end conditions and understand the effect of
same.
CO4 Construct influence lines for statically determinate beams and to use influence
lines to find maximum load effects in beams.
CO5 Calculate the combined stresses and torsion in the circular shaft.
CO6 To analyze the determinate arches.

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 1 - - - - - - - - - - - - - -
CO2 2 1 - 1 - - - - - - - - 1 - -
CO3 2 2 1 1 - - - - - - - - 1 - -
CO4 2 1 1 1 1 - - - - - - - 1 - -
CO5 1 - 1 - - - - - - - - - 1 - -
CO6 2 2 1 1 - - - - - - - - 1 - -

Text Books:
1) Junarkar, S.B. and Shah, H.J., Mechanics of Structures Vol. I, Charotar Publishing
House
2) Negi, L.S. and Jangid, R.S., Structural Analysis, Tata McGraw Hill
3) Reddy, C.S., Basic Structural Analysis, Tata McGraw Hill
Reference Books:
1) Dupen Barry, Applied Strength of Materials for Engineering Technology
2) Gere and Timoshenko, Mechanics of Materials, CBS Publishers
3) Hibbler, R.C., Mechanics of Materials, Pearson Education
4) Wang, C.K., Intermediate Structural Analysis, Tata McGraw Hill

ME241: MATERIAL SCIENCE AND TECHNOLOGY
B TECH 4TH SEMESTER (CIVIL / MECHANICAL ENGINEERING)
Credit and Hours

Hours/week 3 2 5
4
Marks 100 50 150
A. Outline of the Course

Sr. No. Title of the Unit Minimum number of hours
1 Introduction to Material Science 04
2 Crystal Structure and Properties 10
3 Mechanism of crystallization & Phase 06
Transformation
4 Engineering Steels and Alloys 07
5 Corrosion and degradation of metals 04
6 Fiber Reinforced Composites 08
7 Engineered Wood & Wood Products 06
Total Hours: 65
B. Detailed Syllabus
1.0 Introduction to Material Science 04Hours 9%
1.1 Classification of Engineering Materials
1.2 Engineering requirements of materials
1.3 Properties of engineering materials
1.4 Criteria for selection of materials for engineering applications
1.5 Structure property relationship
2.0 Crystal Structure and Properties 10 Hours 22%
2.1 Atomic structure & bonding in solids
2.2 Bravais lattices &Crystal Structure, Crystal planes
& directions, Atomic packing

2.3 Bragg Law &Diffraction
2.4 Imperfection in solids, Linear defects, Slip, Dislocation
&Plastic deformation, Planar defects, Volume defects
2.5 Mechanical properties of metals, Strain hardening,
Thermal, Magnetic , Electrical & Optical properties
of materials
3.0 Mechanism of crystallization & Phase Transformation 06 Hours 13%
3.1 Nucleation-Homogeneous and Heterogeneous
Nucleation- Growth -Single crystal -Polycrystalline Materials
- Basic principles of solidification of metals and alloys
3.2 Phase diagram & phase transformation
4.0 Engineering Steels and Alloys 07 Hours 16%
4.1 Iron carbon diagram and phase diagrams
4.2 Grades of CI, Alloyed Cast Iron, Malleable Iron and S. G. Iron
4.3 Classification, Properties and Use of Structural Steels,
High Carbon and Mild Steels, TMT Steel
4.4 Effects of different alloying metals
5.0 Corrosion and degradation of metals 04 Hours 9%
5.1 Causes and nature of corrosion
5.2 Inter-granular corrosion (IGC), Hydrogen embrittlement
5.3 Measures of counteracting corrosion,
5.4 Metal coatings, Organic coatings, Lining and cladding,
Use of Corrosion inhibitors,
Cathodic protection against corrosion
6.0 Fiber Reinforced Composites 08 Hours 18%
6.1 Types and application of composites
6.2 Particle reinforced composites,
Influence of fiber orientation and concentration
6.3 Fiber phase and the matrix phase, Polymer matrix composite
6.4 Metal matrix composite, Ceramic matrix composite
and carbon-carbon composites
7.0 Engineered Wood and Wood Products 06 Hours 13%
7.1 Laminated veneer lumber (LVL): Laminated

strand lumber (LSL), Parallel strand lumber (PSL),
Wood I-joists, Glue-laminated beams
7.2 Reconstituted products: Particle boards,
Medium Density Fibre Board (MDF), Hardboard
and Block Board
On the successful completion of this course:
CO1 Familiar with various atomic bonding and crystal structure, and also their
characteristics and influence on engineering properties
CO2 Understand basic engineering properties of materials and the underlying
structural features which are governing such properties
CO3 Know the mechanism of crystallization and phase transformation in major
engineering materials
CO4 Be able to understand fundamentals of various engineering steels and alloys
and should have ability to select suitable materials based on their structure-
property relations
CO5 Be able to understand the corrosion and other degradation in metals and
suggest suitable remedial measures.
CO6 Know the structure, properties and application of various fiber reinforced
composites used in engineering, Know process, structure, properties and
application of various processed wood products used in engineering

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 1 - - - 1 2 - 2 - - - 1 - -
CO2 3 2 2 2 2 1 1 - 1 - - - 2 1 1
CO3 3 3 2 3 2 1 2 - - - - - 1 - -
CO4 3 2 3 2 2 2 2 - 1 - - - 2 3 3
CO5 2 2 3 3 3 2 1 - - - - 3 1 - 3
CO6 2 2 2 2 2 1 1 - - - - 3 - 2 2

D. Recommended Study Material
Text Books:
1. Materials Science and Engineering: A First Course, Raghvan V, Prentice Hall of
India
2. Callister W. D. Jr, “Materials science and engineering : An Introduction”,
Edition:-2006, Wiley India, New Delhi, India
3. Dharmendra K umar and Jain S. K., “Material science and manufacturing
process”, Vikas Pub House, New Delhi, India
4. Van Vlack, Elements of Materials Science and Engineering, 1989
Reference books
1. Narula& Gupta, Material Science, Tata McGraw-Hill Education
2. Avner Sidney H., “Physical Metallurgy”, Tata Mcgraw Hill Education
3. Khanna O. P., “Material Science - A Text Book of Material Science & Metallurgy”,
Dhanpat Rai Pub
4. Narang G. B. S. and Manchanedy K., “Materials and Metallurgy”, Khanna Pub
New Delhi, India
5. Thomas G. Williamson, APA Engineered Wood Handbook, McGraw Hill
Professional, 2002
Reading Materials, web materials with full citations

1. http://ocw.mit.edu/OcwWeb/web/courses/courses/index.htm#MaterialsSciencea
ndEngineering
2. http://nptel.iitm.ac.in/courses/Webcourse-
contents/IIScBANG/Material%20Science/
New_index1.html

HS111.02 A: HUMAN VALUES & PROFESSIONAL ETHICS
B TECH 4TH SEMESTER (UNIVERSITY ELECTIVE)
Credits and Hours:
Teaching Scheme Theory Practical Tutorial Total Credit
Hours/week - 02/01 - 30/15

2
Marks - 100 - 100
Pre-requisite courses:
 Ethical Leadership through Giving Voice to Values
https://www.coursera.org/learn/uva-darden-giving-voice-to-
values?skipBrowseRedirect=true

Sr. Title of the unit Minimum number
No. of hours
1. Introduction to Values and Ethics 05
2. Elements and Principles of Values 08
3. Applied Ethics 08
4. Value, Ethics & Global Issues 05
5. Contemporary Issues in Values and Ethics 04
Total hours (Theory): --
Total hours (Practical): 30
Total hours (Lab) : --
Total hours : 30
1. Introduction to Values and Ethics 5 Hours 17%
Need, Relevance and Significance of Values General, Concept
and Meaning of Values and Ethics
2. Elements and Principles of Values 8 Hours 26%
Universal & Personal Values, Social, Civic & Democratic Value

3. Applied Ethics 8 Hours 26%
Universal Code of Ethics, Professional Ethics, Organizational
Ethics, Ethical Leadership, Domain Specific Ethics
4. Value, Ethics & Global Issues 5 Hours 17%
Cross-Cultural Issues, Role of Ethics & Values in Sustainability
5. Contemporary Issues in Values and Ethics 4 Hours 14%
Case Studies, Presentations, Projects
C. Course Outcome :
CO1 Understand the concepts and mechanics of values and ethics.
CO2 Understand the significance of value and ethical inputs in and get motivated to
apply them in their life and profession.
CO3 Understand the significance of value and ethical inputs in and get motivated to
apply them in social, global and civic issues.
CO4 Develop their responsibility towards society.
CO5 Comprehend their own core values and adhere to those values at their
workplace.
CO6 Practice Ethical Leadership.

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 - - - - - - 1 3 2 1 - - - - -
CO2 - - - - - 1 - - 1 - - 2 - 2 -
CO3 - - - - - 3 1 - - - - - - 1 -
CO4 - - - - - 3 1 1 - - - - - - -
CO5 - - 1 1 - - - - 2 - - - - 1 -
CO6 - - - - - - - 3 - 2 - - - 1 -

 Reference book:
1. Human Values and Ethics in Workplace, United Nations Settlement Program, 2006.
(http://www.unwac.org/new_unwac/pdf/HVWSHE/Human%20Values%20&%20Et
hics%20-%20Individual%20Guide.pdf).
2. Ethics for Everyone, Arthur Dorbin, 2009.
(http://arthurdobrin.files.wordpress.com/2008/08/ethics-for-everyone.pdf) .
3. Values and Ethics for 21st Century, BBVA. (https://www.bbvaopenmind.com/wp-
content/uploads/2013/10/Values-and-Ethics-for-the-21st-Century_BBVA.pdf)
 Web material:
• www.ethics.org

MA249: NUMERICAL METHODS
B TECH 4TH SEMESTER (CL/ME)
Credit and Hours:

Hours/Week 3 2 5
4
Marks 100 50 150

Minimum
Sr.
Title of Unit number of
No
Hours
1 Errors 05
2 Approximate solutions of nonlinear equations and system of 08
linear equations
3 Interpolation 12
4 Numerical Integration and Differentiation 08
5 Numerical Solution of Ordinary and Partial Differential equations 12

Total Hours: 75
1 Errors 05 Hours (12%)

1.1 Exact and Approximate Numbers and Significant figures
1.2 Rules of Rounding of numbers, Correct digit
1.3 Types of errors: Absolute, Relative and Percentage
1.4 Rounding error, Inherent error and Truncation error
1.5 Propagation of errors
2 Approximate solutions of nonlinear equations and System of 08 Hours (18%)
linear equations
2.1 Bisection method, Method of False position, Method of Iteration.

2.2 Newton-Raphson method for single variable and their convergenc
2.3 Gauss Jordan method
2.4 Gauss Seidel method and Gauss Jacobi method
3 Interpolation 12 Hours (26%)
3.1 Finite differences and associated operators
3.2 Newton's Interpolation formulas
3.3 Lagrange interpolation, Hermite interpolation
3.4 Error estimates of these formulae
3.5 Piecewise Interpolation : Linear Spline, Cubic Spline
4 Numerical Integration and Differentiation 08 Hours (18%)
4.1 Newton-Cotes Quadrature formula
4.2 Trapezoidal rule with error
4.3 Simpson’s 1/3 rule and Simpson’s 3/8 rule with respective errors
4.4 Romberg Integration and Gaussian Quadrature
4.5 Numerical Differentiation
5 Numerical Solution of Ordinary and Partial Differential 12 Hours (26%)
Equations
5.1 Overview of ordinary differential equations and partial differential
equations
5.2 Euler method and Modified Euler method
5.3 Runge -Kutta 2nd and 4th order methods
5.4 Finite difference approximations to derivatives
5.5 Solution of Laplace Equation by Gauss Jacobi and Gauss Seidel
Method
5.6 Solution of Heat Equation in One dimension
5.7 Solution of Wave Equation in One dimension

C. Course Outcome:
After learning the course, students will able to

CO1 Employ the knowledge of various types of numerical methods to Engineering and
real world problems.
CO2 Determine approximate solution of non-linear equations and system of linear

equations and examine the error using numerical methods.
CO3 Use numerical techniques for differentiation and definite integration.

CO4 Interpolate or extrapolate approximate value of dependent variable for any value of
independent variable, employing only finitely many tabulated values.
CO5 Interpret the solution of ordinary and partial differential equation numerically.
CO6 Construct the algorithm and perform the various commands in programming
language.

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 1 2 - - - - - - - 1 1 1 -
CO2 3 3 1 2 - - - - - - - - 1 - -
CO3 3 3 1 2 - - - - - - - - 1 - -
CO4 3 3 1 2 - - - - - - - - 1 - -
CO5 3 3 1 2 - - - - - - - - 1 - -
CO6 2 3 - 2 1 - - - - - - 1 1 2 -
 Correlation levels 1, 2 or 3 as defined below:
 1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High)
Text Books:
1. S. S. Sastry;, Introductory methods of numerical analysis. PHI Learning Pvt.
Ltd.,2012.
2. Steven C. Chapra and Raymond P. Canale; Numerical methods for engineers. Vol. 2.
New York: McGraw-Hill, 2012.

Reference Books:
1. S. Grewal and J. S. Grewal; Numerical Methods in Engineering & Science: With
Programs in C, C++ & MATLAB. Khanna, 2014.
2. Jain, M. K., Iyengar, S. R. K. and Jain, R. K., "Numerical Methods for Scientific and
3. Engineering Computation", New Age Pvt. Pub, New Delhi, 2000
4. K. E. Atkinson, Introduction to Numerical Analysis, 2nd Edn, John Wiley, 1989
Web Materials:
1. http://numericalmethods.eng.usf.edu
2. http://mathworld.wolfram.com/
3. http://nptel.ac.in

ANNEXURE II - UNIVERSITY ELECTIVE SYLLABI

Second Year Booklet - 2022-23 - 280622

Uploaded by

Copyright:

Available Formats

Second Year Booklet - 2022-23 - 280622

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Second Year Booklet - 2022-23 - 280622

Uploaded by

Copyright:

Available Formats

ACADEMIC

Faculty of Technology & Engineering

Bachelor of Technology Programme

Programme Educational Objectives (PEO’s):

Programme Outcomes (PO’s)

© CHARUSAT 2022-23 Page 2 of 65

© CHARUSAT 2022-23 Page 3 of 65

By the completion of Civil Engineering program, the student will attain:

CHARUSAT welcomes you for a Bright Future

© CHARUSAT 2022-23 Page 4 of 65

Faculty of Technology and Engineering

Charotar University of Science and Technology (CHARUSAT)

© CHARUSAT 2022-23 Page 5 of 65

To ensure uniform system of education, duration of undergraduate and post graduate

The Semester system of education should be followed across the Charotar

Undergraduate programme (B. Tech.)

3. Eligibility for Admissions

As enacted by Govt. of Gujarat from time to time.

As enacted by Govt. of Gujarat from time to time.

5. Programme Structure and Credits

As per Annexure – 1 attached

© CHARUSAT 2022-23 Page 6 of 65

Student’s attendance in a course should be 80%.

7.2 Internal Evaluation

7.3 University Examination

7.5 Performance at Internal & University Examination

Minimum marks in Minimum marks Overall

© CHARUSAT 2022-23 Page 7 of 65

Table: Grading Scheme (UG)

(i) SGPA = ∑ CiGi/ ∑ Ci where,

(ii) CGPA = ∑ CiGi/ ∑ Ci where,

(iii) No student will be allowed to move further in next semester if CGPA is

© CHARUSAT 2022-23 Page 8 of 65

10. Award of Class

Distinction : CGPA ≥ 7.5 & ≤ 10.0

© CHARUSAT 2022-23 Page 9 of 65

FACULTY OF TECHNOLOGY & ENGINEERING (FTE)

CHOICE BASED CREDIT SYSTEM

© CHARUSAT 2022-23 Page 10 of 65

1. CBCS – Conceptual Definitions / Key Terms (Terminologies)

1.1. Core Courses

1.1.2 Programme Core (PC)

1.2 Elective Course (EC)

1.2.1 Institute Elective Course (IE)

1.2.2 Programme Elective Course (PE)

© CHARUSAT 2022-23 Page 11 of 65

1.3 Non Credit Course (NC) - AUDIT Course

A ‘Non Credit Course’ is a course where students will receive Participation or

© CHARUSAT 2022-23 Page 12 of 65

© CHARUSAT 2022-23 Page 13 of 65

3RD SEMESTER UNDERGRADUATE PROGRAMME

© CHARUSAT 2022-23 Page 14 of 65

4TH SEMESTER UNDERGRADUATE PROGRAMME

© CHARUSAT 2022-23 Page 15 of 65

© CHARUSAT 2022-23 Page 16 of 65

CHAROTAR UNIVERSITY OF SCIENCE AND TECHNOLOGY

© CHARUSAT 2022-23 Page 17 of 65

Teaching Scheme Theory Practical Total Credit

A. Outline of the course: