SELF PROPELLED GREEN BEAN HARVESTER

GB7150

OXBO.COM
GB7150 | SELF PROPELLED GREEN BEAN HARVESTER
The Oxbo GB7150 has been specifically designed for the harvesting of green
beans. A well proven concept the machine continues to evolve, incorporating
continuous design improvements for better performance and reduced
maintenance.
 HIGH CAPACITY HOPPER
The high capacity hopper has variable discharge height.
Beans are discharged from the hopper by the plastic
interlocking conveyor for gentle unloading

ARTICULATED FRAME
The articulated frame enables the machine to operate in
areas of limited access and minimizes unharvested crop
as the rear wheels follow the path of the front wheels.
The crab steering feature on the front wheels maximizes
clearance between the wheels and the unharvested
crop in adverse conditions.

FLEETCOMMAND
A telemetry tool for the remote
OXBO GB7150 FEATURES
monitoring of harvesters in the field.
Via a browser, authorised users can view
the semi-live (within minutes) harvesting/
road/idle status of a machine along with
CABIN the machine data and field statistics.

The climate controlled Vista II Claas cabin, with CCTV

RUBBER MOUNTED
Plants are presented to the rubber mounted picking
tines by the plant aligning brushes. An optional plant
aligning belt is available to replace the brushes.
 PRINCIPLE OF OPERATION

Brushes and rollers, at the front of the picking head Conveyors (7). As the crop is falling from the Transfer
present the bean plants head first to the rotating Picking Elevator it passes through an air stream created by
Reel (2) The tines of the Picking Reel then strip the two Blower Fans (8) and the four Extractor Fans
the beans and some leaves from the plant and throw (9). The powerful airflow separates any remaining
them on to the full width Main Feed Elevator (3). waste from the beans and deposits it back on the field
As the crop moves up the Feed Elevator it passes via the air ducts (10) on the rear corners of the front
under the rotating Plant Extractor Reel (4). chassis section. An additional pinned decluster belt in
The steel tines of the Plant Extractor Reel move through the rear of the cleaning chamber lifts clusters to within
the crop and remove plant stalks and beans that are in reach of the four extractor fans. The cleaned crop then
clusters. These are then placed on the Plant Extractor drops onto the two Cross Conveyors and is then
Conveyor (5) ,which moves the waste material to the left transferred to the central Hopper Elevator (11) . The
of the vehicle and deposits back in the field. From the Hopper Elevator transports the beans to the Hopper (12)
top of the Main Feed Elevator the crop is conveyed that is located on the rear chassis section.
onto the Transfer Elevator (6). The crop then falls from The Hopper is equipped with either a moving floor (13)
the top of the Transfer Elevator onto the two Cross or moving bars to control the unloading of the beans.

Oxbo has been producing vegetable harvesters in Fakenham, Norfolk for over forty years. We have a highly loyal
and experienced team of employees dedicated to providing our customers the very best inharvesting technology.
Our in-house design team alone has over 40 years combined experience. Working closely with growers and
processors our harvesters have been developed to increasing levels of capacity, reliability and efficiency, delivering
a high quality end product as economically as possible. Our products are supported worldwide either directly
from the Fakenham factory or via our service network. Our pre-and after-sales services include operator training;
specialist technical support; 24/7 in-season service; out-of-season maintenance and spare parts sales. All of this
combines to ensure our customers obtain the best value and performance from their Oxbo harvester.
 SPECIFICATIONS

Main dimensions
Length 9900

Overhang 2250
Wheel centres 4000
Overhang front 3650
Height 3950
Discharge height
Maximum 4200
Minimum 3800
Height (max) 7500

Width 3500
Weights (on the road) kgs
Front axle 8870
Rear axle 8300
Total (approx) 17170
Fluid capacities litres
Fuel 650
Hydraulic oil 400

Hopper Capacity
Volume 14,4m³
Weight of beans (approx) 4000-5000kg
Tyres
Alliance 750/65R26
Hydraulic Oil 0.700 m
Rolling circumference 4.750 m
Pressure 1.6 bar
Engine
Make John Deere
Type 6068CI550
Power rating 209 kW (DIN3046)
Capacity 6.8 litres
Transmission
Type Hydrostatic
Pump Danfoss 130 cc/rev
Motors (front) Poclain MSE18
Motors (rear) 6WD Poclain MSE18
Motor displacement 2106/700cc
Vehicle speeds
Road 25 kph
Field 9.8 kph

Visit our website at

Descriptions and specifications subject to change without notice. ©2023 | GB7150-23