Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

La 78040

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Ordering number : EN7880A

Monolithic Linear IC

LA78040N TV and CRT Display Vertical


Output IC with Bus Control
Support
Overview
The LA78040N is a vertical deflection output IC for high image quality TV and CRT displays that supports the use of a
bus control system signal-processing IC. The sawtooth waveform from the bus control system signal-processing IC can
directly drive the deflection yoke (including the DC component). Color TV vertical deflection system adjustment
functions can be controlled over a bus system by connecting the LA78040N to a Sanyo LA768X series or LA769XX
series bus control system signal-processing IC.
Since the LA78040N provides a maximum deflection current of 1.7Ap-p, it is optimal for small and medium size CRTs.

Functions
• Built-in pump-up circuit for low power dissipation.
• Vertical output circuit.
• Thermal protection circuit.

Specifications
Maximum Ratings at Ta = 25°C
Parameter Symbol Conditions Ratings Unit
Pump-up block supply voltage +B2 max 34 V
Output block supply voltage +B6 max 70 V
Allowable power dissipation Pd max Mounted on an arbitrarily large heat sink. 9 W
Deflection output current I5 max -1.4 to +1.4 Ap-o
Thermal resistance θj-c 3 °C/W
Operating temperature Topr -20 to +85 °C
Storage temperature Tstg -40 to +150 °C

90705 MS OT B8-6984 No.7880-1/4


LA78040N
Operating Conditions at Ta = 25°C
Parameter Symbol Conditions Ratings Unit
Recommended supply voltage +B2 24 V
Operating supply voltage range +B2op 16 to 33 V
Deflection output current I5p-p To 1.8 Ap-p

Operating Characteristics at Ta = 25°C, +B2 = 24V


Ratings
Parameter Symbol Conditions Unit
min typ max
Deflection output saturation Vsat5-4 I5 = 0.9A
1.3 V
voltage (lower)
Deflection output saturation Vsat6-5 I5 = -0.9A
3.2 V
voltage (upper)
Pump-up charge saturation Vsat3-4 I3 = 20mA
1.8 V
voltage
Pump-up discharge saturation Vsat2-3 I3 = 0.9A
3.0 V
voltage
Idling current Idl 20 50 mA
Midpoint voltage Vmid 11.0 12.0 13.0 V
Note: Current flowing into the IC is positive (+) and current flowing out is negative (-).

Package Dimensions
unit : mm
3286

No.7880-2/4
LA78040N
Block Diagram

Application Circuit Example 1 (Single power supply)

LA78040N

1 2 3 4 5 6 7
100µF

10kΩ
1µF

+VCC(24V)
10kΩ

5V
100µF

330Ω

0.1µF

IN 10kΩ
1.0Ω

33kΩ 10kΩ
1000µF
4.7µF
11kΩ

1.0Ω

No.7880-3/4
LA78040N
Application Circuit Example 2 (Dual power supply)

LA78045

1 2 3 4 5 6 7

+VCC
-VCC

IN Vref

! Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
! SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could give
rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that
could cause damage to other property. When designing equipment, adopt safety measures so that these
kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits
and error prevention circuits for safe design, redundant design, and structural design.
! In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products
must not be exported without obtaining the export license from the authorities concerned in accordance
with the above law.
! No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, of
otherwise, without the prior written permission of SANYO Electric Co., Ltd.
! Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for
the SANYO product that you intend to use.
! Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no
guarantees are made or implied regarding its use or any infringements of intellectual property rights or
h i h f hi d i
This catalog provides information as of September, 2005. Specifications and information herein are subject
to change without notice.

PS No.7880-4/4

You might also like