12

TVL - Computer
Systems Servicing
Quarter 2 – Module 2:
Router configuration

Week 3-4

SELF-LEARNING MODULE

DIVISION OF GENERAL SANTOS CITY

Computer Systems Servicing – Grade 12
Self-Learning Module (SLM)
Quarter 2 – Module 2: Router configuration
First Edition, 2020

Republic Act 8293, section 176 states that: No copyright shall subsist in any work of
the Government of the Philippines. However, prior approval of the government agency or office
wherein the work is created shall be necessary for exploitation of such work for profit. Such
agency or office may, among other things, impose as a condition the payment of royalties.

Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names,
trademarks, etc.) included in this module are owned by their respective copyright holders.
Every effort has been exerted to locate and seek permission to use these materials from their
respective copyright owners. The publisher and authors do not represent nor claim ownership
over them.

Development Team of the Module

Writers: Donabella P. Pagalan
Editors: Wilma M. Abendan, Marie-Berthe P. Pabale
Reviewers: Amalia C. Caballes , Sally A. Palomo
Illustrator: Donabella P. Pagalan
Layout Artist: Wilma M. Abendan
Cover Art Designer: Reggie D. Galindez
Management Team: Romelito G. Flores, CESO V – Schools Division Superintendent
Mario M. Bermudez, CESO VI – Asst. Schools Division Superintendent
Juliet F. Lastimosa, CID Chief
Sally A. Palomo, EPS - LRMS
Gregorio O. Ruales, EPS – ADM Coordinator
Amalia C. Caballes - Education Program Supervisor EPP/TLE/TVL

Printed in the Philippines by Department of Education – General Santos City

Office Address: Tiongson St., Lagao, General Santos City

Telefax: (083) 552-8909
E-mail Address: depedgensan@deped.gov.ph
 12

Computer
Systems
Servicing

Week 3-4
Quarter 2 – Module 2
Router configuration

SELF-LEARNING MODULE

DIVISION OF GENERAL SANTOS CITY

Introductory Message
For the facilitator:
Welcome to the Computer Systems Servicing 12 Self-Learning Module (SLM) on
router configuration!
This module was collaboratively designed, developed and reviewed by educators
both from public and private institutions to assist you, the teacher or facilitator
in helping the learners meet the standards set by the K to 12 Curriculum while
overcoming their personal, social, and economic constraints in schooling.
This learning resource hopes to engage the learners into guided and independent
learning activities at their own pace and time. Furthermore, this also aims to
help learners acquire the needed 21st century skills while taking into
consideration their needs and circumstances.
In addition to the material in the main text, you will also see this box in the body
of the module:

Notes to the Teacher

This contains helpful tips or strategies that
will help you in guiding the learners.

As a facilitator you are expected to orient the learners on how to use this module.
You also need to keep track of the learners' progress while allowing them to
manage their own learning. Furthermore, you are expected to encourage and
assist the learners as they do the tasks included in the module.

ii
For the learner:
Welcome to the Computer Systems Servicing 12 Self-Learning Module (SLM) on
router configuration!
The hand is one of the most symbolized part of the human body. It is often used
to depict skill, action and purpose. Through our hands we may learn, create and
accomplish. Hence, the hand in this learning resource signifies that you as a
learner is capable and empowered to successfully achieve the relevant
competencies and skills at your own pace and time. Your academic success lies
in your own hands!
This module was designed to provide you with fun and meaningful opportunities
for guided and independent learning at your own pace and time. You will be
enabled to process the contents of the learning resource while being an active
learner.
This module has the following parts and corresponding icons:
What I Need to This will give you an idea of the skills or
Know competencies you are expected to learn in
the module.

What I Know This part includes an activity that aims to

check what you already know about the
lesson to take. If you get all the answers
correct (100%), you may decide to skip this
module.

What’s In This is a brief drill or review to help you

link the current lesson with the previous
one.

What’s New In this portion, the new lesson will be

introduced to you in various ways such as
a story, a song, a poem, a problem opener,
an activity or a situation.

What is It This section provides a brief discussion of

the lesson. This aims to help you discover
and understand new concepts and skills.

What’s More This comprises activities for independent

practice to solidify your understanding
and skills of the topic. You may check the
answers to the exercises using the Answer
Key at the end of the module.

iii
 What I Have This includes questions or blank
Learned sentence/paragraph to be filled in to
process what you learned from the lesson.

What I Can Do This section provides an activity which will

help you transfer your new knowledge or
skill into real life situations or concerns.

Assessment This is a task which aims to evaluate your

level of mastery in achieving the learning
competency.
Additional In this portion, another activity will be
Activities given to you to enrich your knowledge or
skill of the lesson learned. This also tends
retention of learned concepts.

Answer Key This contains answers to all activities in

the module.

At the end of this module you will also find:

References This is a list of all sources used in

developing this module.

The following are some reminders in using this module:

1. Use the module with care. Do not put unnecessary mark/s on any part of
the module. Use a separate sheet of paper in answering the exercises.
2. Don’t forget to answer What I Know before moving on to the other activities
included in the module.
3. Read the instruction carefully before doing each task.
4. Observe honesty and integrity in doing the tasks and checking your
answers.
5. Finish the task at hand before proceeding to the next.
6. Return this module to your teacher/facilitator once you are through with
it.
If you encounter any difficulty in answering the tasks in this module, do not
hesitate to consult your teacher or facilitator. Always bear in mind that you
are not alone.
We hope that through this material, you will experience meaningful learning
and gain deep understanding of the relevant competencies. You can do it!

iv
 What I Need to Know

This module was designed and written with you in mind. It is here to help you
master router configuration. The scope of this module permits it to be used in many
different learning situations. The language used recognizes the diverse vocabulary
level of students. The lessons are arranged to follow the standard sequence of the
course.

After going through this module, you are expected to:

1. explain the functions of a router;
2. identify the difference between a switch and a router; and
3. configure a router, LAN and login settings.

1
 What I Know

Before we start our lesson, I would like to know about what you learned about
switches and routers as well as their configurations.

Choose the letter of the correct answer. Write your answer on a separate sheet
of paper.

_______ 1. What network device connects a local network to other networks?

a. Network Interface Card c. switch
b. router d. wireless repeater

_______ 2. Which term is referred to for routers to receive and transmit data packets
to and from networks?
a. portal c. doorway
b. gateway d. threshold

_______ 3. How do routers know exactly which device it needs to transmit the
received data?
a. through email address
b. through the device’s IP address
c. through the location of the device
d. through the device’s MAC address

_______ 4. A switch has the ability to assign IP addresses to devices connected to it.
Is this statement correct?
a. correct c. not correct
b. partly correct d. missing something to become correct

_______ 5. Can a router function like a switch?

a. Yes c. No in some ways
b. No d. Yes but not entirely

_______ 6. Which of the following statements is true?

a. A switch has the capacity to connect devices wirelessly
b. The router has the capacity to connect devices wirelessly
c. Both routers and switches has the capacity to connect devices
wirelessly
d. Both routers and switches has no capacity to connect devices
wirelessly

_______ 7. How do you reset a router?

a. by turning off the device
b. by configuring through its menu
c. by unplugging it from the modem
d. by pressing the reset button for 5-10 seconds

2
_______ 8. In which port in the router should you plug in the other end of your
computer’s LAN cable?
a. WAN port c. any of the LAN ports
b. LAN port 1 only d. LAN port 1 and 4 only

_______ 9. What is the usual default user name and password of the router?
a. user and 1234 c. admin and admin
b. admin and 1234 d. user and P@ssword

_______ 10. What details can be found at the back of the router?
I. User name and password
II. IP address of the router
III. Wi-Fi password

a. I and II are correct c. II and III are correct

b. I and III are correct d. all are correct

_______ 11. What makes a strong password?

a. lowercase letters only
b. lowercase and uppercase letter
c. combine numeric and special characters
d. combination of lowercase and uppercase letters, numbers and special
characters.

_______ 12. What is the usual default IP address of the router?

a. 192.168.0.0 c. 192.168.2.0
b. 192.168.0.1 d. 192.168.1.1

_______ 13. Which of the following statements is true?

a. router passwords and Wi-Fi passwords are different
b. router passwords and Wi-Fi passwords are the same
c. router passwords are partly the same with Wi-Fi passwords
d. all statements are wrong

_______ 14. Which setting can a router’s user name and password be changed?
a. Network c. Wireless
b. Security d. System Tools

_______ 15. Which switch port should one connect the LAN cable from the router in
order for the network to connect to the internet?
a. port 1 only c. any of the ports
b. last port only d. port 1 or last port only

_______ 16. What does a router do when it receives data packets that are not meant
for its own network?
a. it deletes it c. it sends if off
b. it receives it d. it sends it back to the sender

_______ 17. How many LAN ports does a home router have?
a. 2 b. 4 c. 8 d. 16

3
_______ 18. What system does a router have that makes it capable of assigning IP
addresses to devices connected to it?
a. WPS c. forwarding
b. DHCP d. MAC Addressing

_______ 19. What command is issued in the command prompt to identify the IP
address of your computer?
a. ping c. telnet
b. route d. ipconfig

_______ 20. Which setting can a router’s LAN IP address be changed?

a. DHCP c. security
b. network d. access control

4
 Lesson

2 Router Configuration

Hello! It is fulfilling to learn new skills and learning how to network several
computers is an accomplishment. However, as the demand of the network rises, so
is our need to learn more.

In this module, you will learn the functions of a router and how it differs
from a switch. Are you excited to learn how to connect your computer to the
internet? What about connecting your newly created network to the internet?

Prepare yourself as we learn to configure LAN and login settings for the
router.

After going through this module you are expected to:

• configure LAN in accordance with manufacturer’s instructions and
network design.

What’s In

Let’s recall what you have learned from the previous lesson by answering the
following questions:
1. What are switches? When are they used in the network?
___________________________________________________________________________
___________________________________________________________________________

2. Is a switch faster than a hub? Explain your answer.

___________________________________________________________________________
___________________________________________________________________________

3. Why do we change the computer name and workgroup when our device is
connected to a network?
___________________________________________________________________________
___________________________________________________________________________

4. Explain/demonstrate how to configure the computer name and workgroup.

___________________________________________________________________________
___________________________________________________________________________

5. Explain/demonstrate how to configure IP address of the computer in an

Ethernet.
___________________________________________________________________________
___________________________________________________________________________
5
 What’s New

From our previous lesson, you were given two scenarios where network
requirements are increasing. Let us recall them here to see the progression of our
network from being simple to a more complex network.
Scenario 1
You were paired with your seatmate and tasked by your Media and
Information Literacy teacher to create a Video log about “Tips on how to avoid
Covid-19 disease”. At first, only the two of you are sharing the task and therefore
sharing videos, scripts and other documents from your laptops. As as a CSS
student, how are you going to share resources in an easiest way possible?

Here we can solve this scenario by connecting your laptops using a

crossover LAN cable in order to share resources.

Scenario 2
The following day, one of your classmates, who was absent the previous
day, is assigned to join you and your partner. Now, there are three of you who
are going to share resources for your VLOG. How are you going to address your
connectivity issue? How are you going to network the 3 computers and what
devices are you going to use?
In this second scenario, we can solve this by adding a device that can
handle multiple exchange of data simultaneously and that is the switch. In this
solution, you can actually connect not only 3 computers but you can add more
if in case your MIL teacher wants to add more members to your group
considering that the limit to the network is the available number of ports your
switch has.

Let us now consider Scenario 3.

Scenario 3

As you worked on your project VLOG, you felt the need to communicate
and share files online. In short, your small network now needs to connect to a
wider network which is the Internet. How are you going to address this
situation?

As you can see, your network demand is again higher than the previous
one. Another device is needed in order to address this issue and we will discuss
and configure this device in this lesson.

6
 What Is It
WHAT IS A ROUTER?

A router is a network device that connects a local network to the

internet. From its root word route, it routes data from one network to
another based on their IP address. Therefore it is what you need in order
for the data in your group’s network to be transmitted outside your local
network and at the same time access the information superhighway, the
internet.

How does a router work?

When a router receives data packets from other networks, it inspects the data’s
IP address. It then determines if the data is meant for its own network or for another
network. When the router determines that the data is for its own network, it receives
the data. If it determines that the data is not for its own network, it sends it off to another
network. The router is then the gateway of your network. It serves as an entrance and
exit of data in your network.

Network D

Accepts the
data

Data from Network X to Data from Network Y to

Network D Network Z
Router
Sends off
the data

Switches and Routers

Based on our illustrations so far, switches and routers have distinct functions
in the network. Here’s a table of their functions for clarity.

Switch Router
Creates networks Connects networks
Allows exchange of data within the Allows exchange of data from the local
network network to other networks
• In a way, functions as a router • Can function as a switch but is
within its network but cannot limited to the number of ports
communicate outside its network available on it
• Limited to LAN and not possible for • It cannot expand to more computers
WAN because switches do not have other than those that can connect
WAN ports to the available Ethernet ports
Does not have the capacity to assign IP
Can automatically assign IP addresses
addresses to computers within the
to the computers connected to it
network. It needs to be manually
through DHCP.
assigned per computer.
Confined to wired LAN Has a wireless LAN capability

7
 SETTING UP CONNECTION USING A ROUTER

Steps

1. Plug in the power cord of the router to the power source and turn it on.

2. Reset the router by pressing the reset

button for at least 5 to 10 seconds.

3. Plug in LAN cable to LAN port in your

computer

4. Plug the other end of the UTP/LAN cable

to any of the 4 Ethernet ports of the
router. They all work the same way.

5. Plug the LAN cable from your modem, to

the internet port in your router.

You are good to go with this setup. It is

now time to configure the router.

8
 Configuring the Router

Routers come with manuals that teach you step-by-step instructions on how
to setup your router. However, there are instances that manuals are not available
especially if you are just borrowing a router or perhaps bought it as a second hand
unit.
First we need to know the initially assigned IP address of the router. We will
change this IP address later. Before we configure the router, make sure you are not
connected to any wireless network. For TPLink router used link for emulator if you
want to practive online.

https://emulator.tp-link.com/EMULATOR_wr840nv4_eu/index.htm

Here are the steps to know the IP address of the router:

1. Type command in the search bar

in your windows taskbar. Best
match will show command
prompt and click it.

2. In the command prompt, type

ipconfig and press enter

Command prompt will then

show you a list of IP addresses. In this
example the computer’s addresses are
as follows:
IPv4 Address : 192.168.0.100
Default Gateway : 192.168.0.1

The IPv4 Address 192.168.0.100 is

assigned by the router to your
computer when you connected to it.
The default gateway 192.168.0.1 then
is the IP address of the router. This
address is not always the same with
the other routers depending on the
manufacturer setting but mostly, it is.

3. Now that you know the IP address of your router, open a Web Browser
(Chrome, Internet Explorer and the like) and type in the IP address
192.168.0.1 in the address bar.

9
The browser will then prompt you to login into the router.

4. Input the default username and password of the

router which are usually found at the back of the
device. In this case which is usually the norm, the
username is admin and the password is admin too.

5. Browser will then open

the router configuration
interface.

10
A. Quick Setup

You may or may not perform a quick setup. But if you decided to run one, you
may follow the steps below.
1. Click Quick Setup and click Next
2. Choose StandardWireless Router and click Next

For this router, the default SSID name is TP-Link_B698. This is the name
assigned by the manufacturer and the Wireless Password is 84210296 which can be
found at the back of your router. You may change the Wireless Network Name (SSID)
and the password. Or you may also do it later.

3. Click Next

192.168.0.1

11
4. Congratulations you finished
the router’s quick Setup. Then it
will prompt you that the router will
reboot. Just click Reboot button.

You will then be able to

access the Internet with your
computer. Go ahead and check
Google!

We now need to change the router’s LAN IP Address. Why are we doing this?

As you can see from the picture above that the IP address is 192.168.0.1 which
is initially assigned by the manufacturer. IT people or IT inclined enthusiasts are
usually aware of this default manufacturer IP address. Therefore if they are trying to
connect to your router, they would first try the manufacturer default settings hoping
that you did not change it. Then worse, they will be able to login to your router if you
also did not change its default login details. It is then a good practice to first change
your IP address so that these wanna-be-network-members would have to think of a
thousand combinations of IP addresses before they could figure out your router’s IP
address. This would be no good if they know “ipconfig”. If they happen to figure out
the IP address with the use of this command, then you have a second line of defence
which is the User-defined User Name and password. Therefore, we are changing them
first.

12
 B. Configure router LAN IP Address

1. Go to Network and click

LAN. Then change the
details of the IP address. In
this case you changed the
0 into 1. Usually, the last
two parts or octet of the IP
address is changed
because the first two parts
or octet is your network ID
that tells what class of IP
address you have. You
learned this lesson in the
previous quarter. Then
click save.

2. Browser will prompt that the router will reboot. Just click okay. It will ask you to
login again.

3. Go to the DHCP tab and

change the start IP Address
and End IP address, then
click Save.

These will be the IP

addresses that will be given to
all the computers that will
connect to the router. We will
further discuss DHCP in the
next lesson.

4. Check if the change in the

gateway’s IP address took
place by issuing ipconfig
command again in the
command prompt.

This time, it shows that

the change in IP address was
successful.

Congratulations for a job well done! Now it’s time to complete the login setup.

13
C. Change router login data (username and password)

Router password and Wi-Fi passwords are different. Router password is used
when you login to the router. Wi-Fi password is used when you login to Wi-Fi
provided by the router.
1. Click system tools
and choose password

2. Then input the

default username and
password and also
input the new
username and
password. Make sure
your password is
strong by combining
uppercase letters
with numbers and
symbols.

Old User Name : admin

Old Password : admin

New User Name : CSSLab

New Password : P@ssword101
Confirm New Password : P@ssword101

Click the save button and the browser will ask you to log in again with the
new User Name and Password this time.

Congratulations for changing your login details! You are now safe from
worrying about the router intruders.

Since you already created a small network using a switch, it’s time to connect
your network to the internet.

Connect network to a router

1. Simply connect a UTP cable from one of the ports of your switch to one of the
LAN ports to your router.
2. Configure your Ethernet network to Obtain IP address. The router will
automatically assign an IP address for your computer.

14
 3.

And there you go! The whole wired network will now be able to access the internet.

What’s More

In this lesson, we learned that a switch and a router are distinct in their
functions. Let’s see how much you have absorbed from the information downloaded
to you so far.

Check S if what is referred to is a function of a switch, check R if it is for a

router and check SR if it is for both.

S R SR Properties
1. It connects different devices on a network.
2. It connects networks.
3. It stores MAC addresses of the different devices connected to
it.
4. It creates networks.
5. It inspects IP addresses of data coming in and out of it.
6. Allows exchange of data within the network
7. It cannot expand to more computers other than those that can
connect to the available Ethernet ports.
8. Alone, it cannot broadcast data outside its own network.
9. It has wireless connectivity.
10. It is connected to a modem.
11. It has no WAN port.
12. It can connect as many as 52 computers in a single network.
13. It can connect 2-4 computers in a network.
14. Alone it cannot connect to the Internet.
15. It has a routing table for IP addresses.

15
 Check the appropriate device or devices to use in a particular situation
and write your explanation why you chose that device.

Situations Switch Router Explanation

1. You are alone in the boarding house
and you want to connect to the
internet with your laptop

2. There are only 5 of you in the house

who want to connect to the internet

3. There are 6 of you in the classroom

who want to share documents for
your research together without
needing the internet.

4. There are 30 computers in the

computer laboratory which should
be connected to the internet.

5. There are two rooms with 20

computers each which should be
connected together to the internet.

Practice your skills. Put a check mark on the box if you have
accomplished each item below.

Checkbox Tasks

Unplug all wirings and connect them again for mastery.

Reset the router

Configure the router with the following settings:

SSID: Yourname_router
Password: Yourfamilyname_yourage

Change the LAN IP address to 192.168.100.0

Change the router login data into the following settings:
User Name: Yourfamilyname
Password: Newrouter2020

Connect a network to a router and configure them to be able

to connect to the internet.

Mentor someone who needs help in this lesson.

16
 What I Have Learned

A. Using a Venn Diagram, write the differences of the switch and the router and
write their overlapping roles.

Switch Router

B. Answer the following questions:

1. Do all networks need a switch? Why?

_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

2. Do all networks need a router? Why?

_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

3. In summary, why do we need to configure a router’s login details, and IP

address?
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

17
 What I Can Do

Can you share some of your thoughts by answering the following questions:

1. Switches and routers have distinct functions that are both important in the
network. In relation to this, can you relate this to comparing our lives to
others? Should we or should we not compare our lives to others? Why?
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

2. Why are login details important? Should you forget your login details? Why?
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

3. Should you use your names and birthdays as login passwords? Why?
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

4. What advice can you give in order to secure your login details?
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

5. Why do you think other people break in to other’s network?

_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

6. Should your router password and Wi-fi password be the same? Why or why
not?
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________

18
 Assessment

Part I - Illustration
Using a diagram, explain the functions of a router. Do your output in a bond
paper.

Part II (Performance Task)

Local Area Network (LAN) port configuration

Performance Objective:
Given (tools, equipment, materials & protective equipment), you should be able to:
1. Setup wirings
2. Configure router LAN and login settings

Supplies/Materials, Tools/Equipment: UTP Cable, computers, switch, router

Steps/Procedures:
1. Ensure that your workplace is safe from stray cables/devices that may cause
others to stumble upon.
2. Prepare your working area, all materials, equipment and protective equipment
3. Unplug all wirings and connect them together
4. Reset the router
5. Change the router SSID and password making sure that the password is “strong”
6. Change router LAN IP address
7. Change router login User Name and password making sure that the password is
“strong”
8. Connect a network using a switch to a router
9. Configure the IP addresses of the computers in the network to be router assigned.
10. Unplug everything and perform 5S upong finishing your tasks

Performance Criteria Checklist

Criteria Yes No
Did the student… (5 pts) (2 pts)
1. Ensure that workplace is safe from stray cables/devices
2. Prepare working area, all materials, equipment and
protective equipment
3. Unplug all wirings and connect them together
4. Reset the router
5. Change the router SSID and password
6. Change router LAN IP address
7. Change router login User Name and password
8. New passwords are “strong”
9. Connect a network using a switch to a router
10. Configure the IP addresses of the computers in the
network to be router assigned.
11. Unplug everything and perform 5S upong finishing tasks

19
Part III
Choose the letter of the correct answer. Write your answer on a separate sheet
of paper.

1. Which is NOT a function of a router?

a. it routes data to the correct receipient
b. it connects a local network to the internet
c. it guards the network from unwanted softwares
d. it gives access to wireless devices to connect to the internet

2. What does being a gateway of the network mean?

a. it provides security from intruders
b. it protects the network from harmful malwares
c. it regulates the entry and exit of data in the network
d. it serves as an entrance and exit of data in the network

3. Which CANNOT be done by a router?

a. it connects all devices together
b. it removes viruses within the network
c. it gives IP addresses to all devices connected to it
d. it disregards data packets that are not meant for its network

4. What do routers check if it is to receive or sends off the data packets?

a. the origin
b. the contents
c. the IP address
d. the MAC address

5. How can you prove that a router can be a switch?

a. it serves as a gateway to the local area network
b. it gives internet access to the devices connected to it
c. it gives IP addresses to all the devices connected to it
d. It connects computers together but is limited to only 4

_______ 6. A switch has the ability to assign IP addresses to devices connected to it.
Is this statement correct?
a. correct
b. not correct
c. partly correct
d. missing something to become correct

7. Which one is the similarity of switches and routers?

a. they both connect all the devices to the internet
b. they both route data to the correct device on the network
c. they both filter information going in and out of the network
d. they both assign MAC addresses to all computers in the network

8. Which CANNOT be done by a switch that a router can?

I. connects wireless devices to the network
II. connects local networks to other networks
III. assign IP addresses to devices connected to it
a. I c. I and III
b. III d. II and III
20
 9. If there are only 4 slots for a LAN using the router, what is the best
option if there are 6 or more laptops that needs to connect to the internet
using one router?
a. purchase another router
b. connect to the router wirelessly
c. find another router to connect to
d. take turns in connecting to the router

_______ 10. How do you reset a router?

a. by turning off the device
b. by configuring through its menu
c. by unplugging it from the modem
d. by pressing the reset button for 5-10 seconds

11. What does ipconfig do?

I. It tells the computer’s IP address
II. It tells the IP address of the router
III. it configures the DHCP server

a. I c. II and III
b. I and II d. I, II and III

12. Which one is the IP addres of the router in this ping result?

a. 192.168.1.152 c. 192.168.1.1
b. 255.255.255.0 d. 192.168.0.1

_______ 13. What is the usual default IP address of the router?

a. 192.168.0.0 c. 192.168.1.0
b. 192.168.0.1 d. 192.168.1.1

14. What do you need to do to configure the router?

a. configure the IP address of the computer
b. turn on the router and you are already connected
c. connect to the network that the router broadcasts wirelessly
d. type the IP address of the router on the browser’s address bar

15. If it is your first time to configure a router, where can you usually get
the username and password information of the routers’ login details?
a. in the router’s website
b. in the router’s warranty card
c. at the back of the router’s box
d. at the back of the physical router

21
 16. Why should you change the router’s IP address and login details?
a. for security reasons
b. it is the basic thing to do
c. it is the instruction given
d. for identity of the network

_______ 17. What does a router do when it receives data packets that are not meant
for its own network?
a. it deletes it
b. it receives it
c. it sends if off
d. it sends it back to the sender

_______ 18. What makes a strong password?

a. lowercase letters only
b. lowercase and uppercase letter
c. combine numeric and special characters
d. combination of lowercase and uppercase letters, numbers and special
characters.

19. Why should you change the IP address of the networked computer to
obtain an IP address automatically?
a. because it is the default option to do
b. because the router will not be able to identify the computer
c. because DHCP server will assign the IP address for the computer
d. because it will conflict with the IP address of the other computers

20. What could be wrong if a computer is connected to the router and it

cannot connect to the internet?
I. the router might not be connected to the modem
II. the computer is not compatible to connect in the network
III. it may have a different gateway than that of the router’s gateway

a. I and II c. I and III

b. II and III d. I, II and III

Additional Activities

Explore on the following for self-discovery.

How will you connect two rooms with 20 computers each in a single router?
Draw a diagram and explain your connections and configurations.

22
 23
What I Know What’s More Assessment
1. b 1. SR 1. c
2. b 2. R 2. d
3. b 3. SR 3. b
4. a 4. S 4. c
5. a 5. R 5. d
6. b 6. S 6. a
7. d 7. R 7. b
8. c 8. S 8. a
9. c 9. R 9. b
10. b 10. R 10. d
11. d 11. S 11. b
12. b 12. S 12. c
13. a 13. SR 13. b
14. d 14. S 14. d
15. c 15. SR 15. d
16. c 16. a
17. b 17. c
18. b 18. d
19. d 19. c
20. b 20. c
21.
Answer Key
References
• Computer Systems Servicing Curriculum Guide

Router emulator
https://emulator.tp-link.com/EMULATOR_wr840nv4_eu/index.htm

DISCLAIMER
This Self-learning Module (SLM) was developed by DepEd – Division of General
Santos City with the primary objective of preparing for and addressing the
new normal. Contents of this module were based on DepEd’s Most Essential
Learning Competencies (MELC). This is a supplementary material to be used
by all learners in General Santos City in all public schools beginning SY 2020-
2021. The process of LR development was observed in the production of this
module. This is version 1.0. We highly encourage feedback, comments, and
recommendations.

For inquiries or feedback, please write or call:

Department of Education – Division of General Santos City

Learning Resource Management System (LRMS)

Tiongson Street, Brgy. Lagao, General Santos City

Telefax No.: (083) 552-8909

Email Address: depedgensan@deped.gov.ph

24