INDORE INSTITUTE OF SCIENCE & TECHNOLOGY

LAB PLAN
Branch: AIML
Subject: OS LAB PLAN Subject Code: AL-501
Subject Teacher: Dr. Richa Gupta Department: Computer Science Allied, AIML

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

PEO1 – ANALYTICAL SKILLS

To facilitate the graduates with the ability to visualize, gather information,

articulate, analyze, solve complex problems, and make decisions. These are essential
to address the challenges of complex and computation intensive problems increasing
their productivity.

PEO2 – TECHNICAL SKILLS

To facilitate the graduates with the technical skills that prepare them for
immediate employment and pursue certification providing a deeper understanding
of the technology in advanced areas of computer science and related fields, thus
encouraging to pursue higher education and research based on their interest.

PEO3 – SOFT SKILLS

To facilitate the graduates with the soft skills that include fulfilling the mission,
setting goals, showing self-confidence by communicating effectively, having a
positive attitude, get involved in team- work, being a leader, managing their career
and their life.

PEO4 – PROFESSIONAL ETHICS

To facilitate the graduates with the knowledge of professional and ethical

responsibilities by paying attention to grooming, being conservative with style,
following dress codes, safety codes, and adapting themselves to technological
advancements.
 PROGRAM SPECIFIC OUTCOMES (PSOs)

After the completion of the course, B. Tech Information Technology, the graduates will
have the following Program Specific Outcomes:

1. Fundamentals and critical knowledge of the Computer System:- Able to

Understand the working principles of the computer System and its components ,
Apply the knowledge to build, asses, and analyze the software and hardware aspects
of it .

2. The comprehensive and Applicative knowledge of Software Development:

Comprehensive skills of Programming Languages, Software process models,
methodologies, and able to plan, develop, test, analyze, and manage the software
and hardware intensive systems in heterogeneous platforms individually or working
in teams.

3. Applications of Computing Domain & Research: Able to use the professional,

managerial, interdisciplinary skill set, and domain specific tools in development
processes, identify the research gaps, and provide innovative solutions to them.
 PROGRAMOUTCOMES (POs)

Engineering Graduates should possess the following:

1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering
fundamentals, and an engineering specialization to the solution of complex engineering
problems.
2. Problem analysis: Identify, formulate, review research literature, and analyze complex
engineering problems reaching substantiated conclusions using first principles of
mathematics, natural sciences, and engineering sciences.
3. Design / development of solutions: Design solutions for complex engineering problems
and design system components or processes that meet the specified needs with
appropriate consideration for the public health and safety, and the cultural, societal,
and environmental considerations.
4. Conduct investigations of complex problems: Use research-based knowledge and
research methods including design of experiments, analysis and interpretation of data,
and synthesis of the information to provide valid conclusions.
5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and
modern engineering and IT tools including prediction and modeling to complex
engineering activities with an understanding of the limitations.
6. The engineer and society: Apply reasoning informed by the contextual knowledge to
assess societal, health, safety, legal and cultural issues and the consequent
responsibilities relevant to the professional engineering practice.
7. Environment and sustainability: Understand the impact of the professional engineering
solutions in societal and environmental contexts, and demonstrate the knowledge of,
and need for sustainable development.
8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities
and norms of the engineering practice.
9. Individual and team work: Function effectively as an individual, and as a member or
leader in diverse teams, and in multidisciplinary settings.
10. Communication: Communicate effectively on complex engineering activities with the
engineering community and with society at large, such as, being able to comprehend
and write effective reports and design documentation, make effective presentations,
and give and receive clear instructions.
11. Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work, as a
member and leader in a team, to manage projects and in multi-disciplinary
environments.
12. Life- long learning: Recognize the need for, and have the preparation and ability to
engage in independent and life-long learning in the broadest context of technological
change.
 DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING

Operating Systems Lab Manual

TABLE OF CONTENTS

EXP.NO NAMEOF THE EXPERIMENT PAGE.NO

1 SYSTEM CALL
CPU SCHEDULING ALGORITHMS
A) FIRST COME FIRST SERVE(FCFS)
2 B) SHORTEST JOB FIRST(SJF)
C) ROUND ROBIN
D) PRIORITY
PRODUCER-CONSUMER PROBLEM USING
3
SEMAPHORES
4 DINING-PHILOSOPHERS PROBLEM
MEMORYMANAGEMENT TECHNIQUES
A) MULTI PROGRAMMING WITH FIXED
5 NUMBER OF TASKS(MFT)
B) MULTI PROGRAMMING WITH
VARIABLE NUMBER OF TASKS(MVT)
CONTIGUOUS MEMORY ALLOCATION
A) WORST FIT
6
B) BEST FIT
C) FIRST FIT
PAGE REPLACEMENT ALGORITHMS
A) FIRST IN FIRST OUT(FIFO)
7
B) LEAST RECENTLY USED(LRU)
C) OPTIMAL
FILE ORGANIZATION TECHNIQUES
8 A) SINGLE LEVEL DIRECTORY
B) TWO LEVEL DIRECTORY
FILE ALLOCATION STRATEGIES
A) SEQUENTIAL
9
B) INDEXED
C) LINKED
10 DEAD LOCK AVOIDANCE
11 DEAD LOCK PREVENTION
DISK SCHEDULING ALGORITHMS
A) FCFS
12
B) SCAN
C) C-SCAN
 EXPERIMENT NO.1

Fork() System Call:

AIM:To write the program to implement fork () system call.
DESCRIPTION:
Used to create new processes. The new process consists of a copy of the address space of the
original process. The value of process id for the child process is zero, whereas the value of process
id for the parent is an integer value greater than zero.
Syntax:
Fork ( );

ALGORITHM:
Step 1: Start the program.
Step 2: Declare the variables pid and child id.
Step 3: Get the child id value using system call fork().
Step 4: If child id value is greater than zero then print as “i am in the parent process”.
Step 5: If child id! = 0 then using getpid() system call get the process id.
Step 6: Print “i am in the parent process” and print the process id.
Step 7: If child id! = 0 then using getppid() system call get the parent process id.
Step 8: Print “i am in the parent process” and print the parent process id.
Step 9: Else If child id value is less than zero then print as “i am in the child process”.
Step 10: If child id! = 0 then using getpid() system call get the process id.
Step 11: Print “i am in the child process” and print the process id.
Step 12: If child id! = 0 then using getppid() system call get the parent process id.
Step 13: Print “i am in the child process” and print the parent process id.
Step 14: Stop the program.
PROGRAM :
SOURCE CODE:/*
fork system call */
#include<stdio.h>
#include <unistd.h>
#include<sys/types.h>
int main()
{
int id,childid;
id=getpid();
if((childid=fork())>0)
{
printf("\n i am in the parent process %d",id);
printf("\n i am in the parent process %d",getpid());
printf("\n i am in the parent process %d\n",getppid());
}
else
{
printf("\n i am in child process %d",id);
printf("\n i am in the child process %d",getpid());
printf("\n i am in the child process %d",getppid());
}
}

OUTPUT:
$ vi fork.c
$ cc fork.c
$ ./a.out
i am in child process 3765
i am in the child process 3766
i am in the child process 3765
i am in the parent process 3765
i am in the parent process 3765
i am in the parent process 3680
RESULT:
Thus the program was executed and verified successfully.
 Wait () and Exit () System Calls:

AIM:To write the program to implement the system calls wait ( ) and exit ( ).
DESCRIPTION:
i. fork ( )
Used to create new process. The new process consists of a copy of the address space of the
original process. The value of process id for the child process is zero, whereas the value of process
id for the parent is an integer value greater than zero.
Syntax: fork ( );
ii. wait ( )
The parent waits for the child process to complete using the wait system call. The wait system
call returns the process identifier of a terminated child, so that the parent can tell which of its
possibly many children has terminated.
Syntax: wait (NULL);
iii. exit ( )
A process terminates when it finishes executing its final statement and asks the operating
system to delete it by using the exit system call. At that point, the process may return data (output)
to its parent process (via the wait system call).
Syntax: exit (0);
ALGORITHM:
Step 1: Start the program.
Step 2: Declare the variables pid and i as integers.
Step 3: Get the child id value using the system call fork ().
Step 4: If child id value is less than zero then print “fork failed”.
Step 5: Else if child id value is equal to zero, it is the id value of the child and then start the child
process to execute and perform Steps 7 & 8.
Step 6: Else perform Step 9.
Step 7: Use a for loop for almost five child processes to be called.
Step 8: After execution of the for loop then print “child process ends”.
Step 9: Execute the system call wait ( ) to make the parent to wait for the child process to get over.
Step 10: Once the child processes are terminated, the parent terminates and hence prints “Parent
process ends”.
Step 11: After both the parent and the child processes get terminated it execute the wait ( ) system
call to permanently get deleted from the OS.
Step 12: Stop the program.
PROGRAM:

1.B.1) SOURCE CODE:

#include<stdio.h>
#include<unistd.h>
int main( )
{
int i, pid;
pid=fork( );
if(pid== -1)
{
printf("fork failed");
exit(0);
}
else if(pid==0)
{
printf("\n Child process starts");
for(i=0; i<5; i++)
{
printf("\n Child process %d is called", i);
}
printf("\n Child process ends");
}
else
{
wait(0);
printf("\n Parent process ends");
}
exit(0);
}
OUTPUT:
$ vi waitexit.c
$ cc waitexit.c
$ ./a.out
Child process starts
Child process 0 is called
Child process 1 is called
Child process 2 is called
Child process 3 is called
Child process 4 is called
Child process ends
Parent process ends

RESULT:
Thus the program was executed and verified successfully
1.B.2 ) WAIT () AND EXIT () SYSTEM CALLS
PROGRAM:
SOURCE CODE:
/* wait system call */
#include <stdlib.h>
#include <errno.h>
#include<stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
main()
{
pid_t pid;
int rv;
switch(pid=fork())
{
case -1:
perror("fork");
exit(1);
case 0:
printf("\n CHILD: This is the child process!\n");
fflush(stdout);
printf("\n CHILD: My PID is %d\n", getpid());
printf("\n CHILD: My parent's PID is %d\n",getppid());
printf("\n CHILD: Enter my exit status (make it small):\n ");
printf("\n CHILD: I'm outta here!\n");
scanf(" %d", &rv);
exit(rv);
default:
printf("\nPARENT: This is the parent process!\n");
printf("\nPARENT: My PID is %d\n", getpid());
fflush(stdout);
wait(&rv);
fflush(stdout);
printf("\nPARENT: My child's PID is %d\n", pid);
 printf("\nPARENT: I'm now waiting for my child to exit()...\n");
fflush(stdout);
printf("\nPARENT: My child's exit status is:
%d\n",WEXITSTATUS(rv));
printf("\nPARENT: I'm outta here!\n");
}
}
OUTPUT:

$ vi wait.c
$ cc wait.c
$ ./a.out
CHILD: This is the child process!
CHILD: My PID is 3821
CHILD: My parent's PID is 3820
CHILD: Enter my exit status (make it small):
CHILD: I'm outta here!
PARENT: This is the parent process!
PARENT: My PID is 3820
10
PARENT: My child's PID is 3821
PARENT: I'm now waiting for my child to exit()...
PARENT: My child's exit status is: 10
PARENT: I'm outta here!

RESULT:
Thus the program was executed and verified successfully

Page 1
EXPERIMENT NO.2

CPU SCHEDULINGALGORITHMS

A). FIRST COME FIRST SERVE:

AIM: To write a c program to simulate the CPU scheduling algorithm First Come First
Serve (FCFS)

DESCRIPTION:

To calculate the average waiting time using the FCFS algorithm first the waiting
time of the first process is kept zero and the waiting time of the second process is the burst
time of the first process and the waiting time of the third process is the sum of the burst
times of the first and the second process and so on. After calculating all the waiting times
the average waiting time is calculated as the average of all the waiting times. FCFS mainly
says first come first serve the algorithm which came first will be served first.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process name and the burst time Step
4: Set the waiting of the first process as ‗0‘and its burst time as its turnaround time Step
5: for each process in the Ready Q calculate
a). Waiting time (n) = waiting time (n-1) + Burst time (n-1) b).
Turnaround time (n)= waiting time(n)+Burst time(n)
Step 6: Calculate
a) Average waiting time = Total waiting Time / Number of process

b) Average Turnaround time = Total Turnaround Time / Number of process

Step 7: Stop the process

Page 2
SOURCE CODE:

#include<stdio.h>
#include<conio.h>
main()
{
int bt[20], wt[20], tat[20], i, n;
float wtavg, tatavg;
clrscr();
printf("\nEnter the number of processes -- ");
scanf("%d", &n);
for(i=0;i<n;i++)
{
printf("\nEnter Burst Time for Process %d -- ", i);
scanf("%d", &bt[i]);
}
wt[0] = wtavg = 0;
tat[0] = tatavg = bt[0];
for(i=1;i<n;i++)
{
wt[i] = wt[i-1] +bt[i-1];
tat[i] = tat[i-1] +bt[i];
wtavg = wtavg + wt[i];
tatavg = tatavg + tat[i];
}
printf("\t PROCESS \tBURST TIME \t WAITING TIME\t TURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\n\t P%d \t\t %d \t\t %d \t\t %d", i, bt[i], wt[i], tat[i]);
printf("\nAverage Waiting Time -- %f", wtavg/n);
printf("\nAverage Turnaround Time -- %f", tatavg/n);
getch();
}

Page 3
INPUT
Enter the number of processes -- 3
Enter Burst Time for Process 0 -- 24
Enter Burst Time for Process 1 -- 3
Enter Burst Time for Process 2 -- 3

OUTPUT
PROCESS BURST TIME WAITING TIME TURNAROUND
TIME
P0 24 0 24
P1 3 24 27
P2 3 27 30
Average Waiting Time-- 17.000000
Average Turnaround Time -- 27.000000

Page 4
 B). SHORTEST JOB FIRST:

AIM: To write a program to stimulate the CPU scheduling algorithm Shortest job first
(Non- Preemption)

DESCRIPTION:

To calculate the average waiting time in the shortest job first algorithm the sorting of
the process based on their burst time in ascending order then calculate the waiting time of
each process as the sum of the bursting times of all the process previous or before to that
process.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process id and accept the CPU
burst time
Step 4: Start the Ready Q according the shortest Burst time by sorting according to
lowest to highest burst time.
Step 5: Set the waiting time of the first process as ‗0‘ and its turnaround time as its burst
time.
Step 6: Sort the processes names based on their Burt time
Step 7: For each process in the ready queue,
calculate
a) Waiting time(n)= waiting time (n-1) + Burst time (n-1)
b) Turnaround time (n)= waiting time(n)+Burst time(n)
Step 8: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number of process
Step 9: Stop the process

Page 5
SOURCE CODE :

#include<stdio.h>
#include<conio.h>
main()
{
int p[20], bt[20], wt[20], tat[20], i, k, n, temp; float wtavg,
tatavg;
clrscr();
printf("\nEnter the number of processes -- ");
scanf("%d", &n);
for(i=0;i<n;i++)
{
p[i]=i;
printf("Enter Burst Time for Process %d -- ", i);
scanf("%d", &bt[i]);

}
for(i=0;i<n;i++)
for(k=i+1;k<n;k++)
if(bt[i]>bt[k])
{
temp=bt[i];
bt[i]=bt[k];
bt[k]=temp;

temp=p[i];
p[i]=p[k];
p[k]=temp;
}
wt[0] = wtavg = 0;
tat[0] = tatavg = bt[0]; for(i=1;i<n;i++)
{
wt[i] = wt[i-1] +bt[i-1];
tat[i] = tat[i-1] +bt[i];
wtavg = wtavg + wt[i];
tatavg = tatavg + tat[i];
}
printf("\n\t PROCESS \tBURST TIME \t WAITING TIME\t TURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\n\t P%d \t\t %d \t\t %d \t\t %d", p[i], bt[i], wt[i], tat[i]);
printf("\nAverage Waiting Time -- %f", wtavg/n);
printf("\nAverage Turnaround Time -- %f", tatavg/n); getch();}

Page 6
INPUT
Enter the number of processes -- 4
Enter Burst Time for Process 0 -- 6
Enter Burst Time for Process 1 -- 8
Enter Burst Time for Process 2 -- 7
Enter Burst Time for Process 3 -- 3
OUTPUT
PROCESS BURST WAITING TURNARO
TIME TIME UND TIME
P3 3 0 3
P0 6 3 9
P2 7 9 16
P1 8 16 24
Average Waiting Time -- 7.000000
Average Turnaround Time -- 13.000000

Page 7
 C). ROUND ROBIN:

AIM: To simulate the CPU scheduling algorithm round-robin.

DESCRIPTION:

To aim is to calculate the average waiting time. There will be a time slice, each
process should be executed within that time-slice and if not it will go to the waiting
state so first check whether the burst time is less than the time-slice. If it is less than it
assign the waiting time to the sum of the total times. If it is greater than the burst-time
then subtract the time slot from the actual burst time and increment it by time-slot and
the loop continues until all the processes are completed.

ALGORITHM:
Step 1: Start the process
Step 2: Accept the number of processes in the ready Queue and time quantum (or) time
slice
Step 3: For each process in the ready Q, assign the process id and accept the CPU burst
time
Step 4: Calculate the no. of time slices for each process where No. of time
slice for process (n) = burst time process (n)/time slice
Step 5: If the burst time is less than the time slice then the no. of time slices =1.
Step 6: Consider the ready queue is a circular Q, calculate
a) Waiting time for process (n) = waiting time of process(n-1)+ burst time of
process(n-1 ) + the time difference in getting the CPU fromprocess(n-1)
b) Turnaround time for process(n) = waiting time of process(n) + burst time of
process(n)+ the time difference in getting CPU from process(n).
Step 7: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number ofprocess Step
8: Stop the process

Page 8
SOURCE CODE
#include<stdio.h>
main()
{
int i,j,n,bu[10],wa[10],tat[10],t,ct[10],max;
float awt=0,att=0,temp=0;
clrscr();
printf("Enter the no of processes -- ");
scanf("%d",&n);
for(i=0;i<n;i++)
{
printf("\nEnter Burst Time for process %d -- ", i+1);
scanf("%d",&bu[i]);
ct[i]=bu[i];
}
printf("\nEnter the size of time slice -- ");
scanf("%d",&t);
max=bu[0];
for(i=1;i<n;i++)
if(max<bu[i])
max=bu[i];
for(j=0;j<(max/t)+1;j++)
for(i=0;i<n;i++)
if(bu[i]!=0)
if(bu[i]<=t) {
tat[i]=temp+bu[i];
temp=temp+bu[i];
bu[i]=0;
}
else {
bu[i]=bu[i]-t;
temp=temp+t;
}
for(i=0;i<n;i++){
wa[i]=tat[i]-
ct[i]; att+=tat[i];
awt+=wa[i];}
printf("\nThe Average Turnaround time is -- %f",att/n);
printf("\nThe Average Waiting time is -- %f ",awt/n);
printf("\n\tPROCESS\t BURST TIME \t WAITING TIME\tTURNAROUND TIME\n");
for(i=0;i<n;i++)
printf("\t%d \t %d \t\t %d \t\t %d \n",i+1,ct[i],wa[i],tat[i]);
getch();}

Page 9
INPUT:

Enter the no of processes – 3

Enter Burst Time for process 1 – 24
Enter Burst Time for process 2 -- 3 Enter
Burst Time for process 3 – 3 Enter the
size of time slice – 3

OUTPUT:
PROCESS BURST TIME WAITING TIME TURNAROUNDTIME
1 24 6 30
2 3 4 7
3 3 7 10
The Average Turnaround time is – 15.666667 The
Average Waiting time is ----------- 5.666667

Page 10
 D). PRIORITY:

AIM: To write a c program to simulate the CPU scheduling priorityalgorithm.

DESCRIPTION:

To calculate the average waiting time in the priority algorithm, sort the burst times
according to their priorities and then calculate the average waiting time of the processes.
The waiting time of each process is obtained by summing up the burst times of all the
previous processes.

ALGORITHM:

Step 1: Start the process

Step 2: Accept the number of processes in the ready Queue
Step 3: For each process in the ready Q, assign the process id and accept the CPU burst
time
Step 4: Sort the ready queue according to the priority number.
Step 5: Set the waiting of the first process as ‗0‘ and its burst time as its turnaround time
Step 6: Arrange the processes based on process priority
Step 7: For each process in the Ready Q calculate Step 8:
for each process in the Ready Q calculate
a) Waiting time(n)= waiting time (n-1) + Burst time (n-1)
b) Turnaround time (n)= waiting time(n)+Burst time(n)
Step 9: Calculate
c) Average waiting time = Total waiting Time / Number of process
d) Average Turnaround time = Total Turnaround Time / Number of process Print the results
in an order.
Step10: Stop

Page 11
SOURCE CODE:
#include<stdio.h>
main()
{
int p[20],bt[20],pri[20], wt[20],tat[20],i, k, n, temp; float wtavg,
tatavg;
clrscr();
printf("Enter the number of processes --- ");
scanf("%d",&n);
for(i=0;i<n;i++){
p[i] = i;
printf("Enter the Burst Time & Priority of Process %d --- ",i); scanf("%d
%d",&bt[i], &pri[i]);
}
for(i=0;i<n;i++)
for(k=i+1;k<n;k++)
if(pri[i] > pri[k]){
temp=p[i];
p[i]=p[k];
p[k]=temp;
temp=bt[i];
bt[i]=bt[k];
bt[k]=temp;
temp=pri[i];
pri[i]=pri[k];
pri[k]=temp;
}
wtavg = wt[0] = 0;
tatavg = tat[0] = bt[0];
for(i=1;i<n;i++)
{
wt[i] = wt[i-1] + bt[i-1];
tat[i] = tat[i-1] + bt[i];

wtavg = wtavg + wt[i];

tatavg = tatavg + tat[i];
}
printf("\nPROCESS\t\tPRIORITY\tBURST TIME\tWAITING TIME\tTURNAROUND
TIME");
for(i=0;i<n;i++)
printf("\n%d \t\t %d \t\t %d \t\t %d \t\t %d ",p[i],pri[i],bt[i],wt[i],tat[i]);
printf("\nAverage Waiting Time is --- %f",wtavg/n); printf("\nAverage
Turnaround Time is --- %f",tatavg/n);
getch();}

Page 12
 INPUT
Enter the number of processes -- 5
Enter the Burst Time & Priority of Process 0 --- 10 3
Enter the Burst Time & Priority of Process 1 --- 1 1
Enter the Burst Time & Priority of Process 2 --- 2 4
Enter the Burst Time & Priority of Process 3 --- 1 5
Enter the Burst Time & Priority of Process 4 --- 5 2
OUTPUT
PROCESS PRIORITY BURST TIME WAITIN TURNARO
G TIME UND TIME
1 1 1 0 1
4 2 5 1 6
0 3 10 6 16
2 4 2 16 18
3 5 1 18 19
Average Waiting Time is --- 8.200000
Average Turnaround Time is --- 12.000000

VIVA QUESTIONS
1) Define the following
a) Turnaround time b) Waiting time c) Burst time d) Arrival time
2) What is meant by process scheduling?
3) What are the various states of process?
4) What is the difference between preemptive and non-preemptive scheduling
5) What is meant by time slice?
6) What is round robin scheduling?

Page 13
EXPERIMENT.NO 3

AIM: To Write a C program to simulate producer-consumer problem using semaphores.

DESCRIPTION
Producer consumer problem is a synchronization problem. There is a fixed size buffer where the
producer produces items and that is consumed by a consumer process. One solution to the producer-
consumer problem uses shared memory. To allow producer and consumer processes to run
concurrently, there must be available a buffer of items that can be filled by the producer and emptied
by the consumer. This buffer will reside in a region of memory that is shared by the producer and
consumer processes. The producer and consumer must be synchronized, so that the consumer does not
try to consume an item that has not yet been produced.

PROGRAM
#include<stdio.>
void main()
{
int buffer[10], bufsize, in, out, produce, consume,
choice=0; in = 0;
out = 0;
bufsize = 10;
while(choice !=3)
{
printf(“\n1. Produce \t 2. Consume \t3. Exit”);
printf(“\nEnter your choice: ”);
scanf(“%d”,&choice);
switch(choice) {
case 1: if((in+1)%bufsize==out)
printf(“\nBuffer is Full”);
else
{
printf(“\nEnter the value: “);
scanf(“%d”, &produce);
buffer[in] = produce;
in = (in+1)%bufsize;
}
break;;;

case 2: if(in == out)

printf(“\nBuffer is Empty”);
else
{
consume = buffer[out];
printf(“\nThe consumed value is %d”, consume);
out = (out+1)%bufsize;
}
break;
} } }

Page 14
OUTPUT
1. Produce 2. Consume 3. Exit
Enter your choice: 2
Buffer is Empty
1. Produce 2. Consume 3. Exit
Enter your choice: 1
Enter the value: 100
1. Produce 2. Consume 3. Exit
Enter your choice: 2
The consumed value is 100
1. Produce 2. Consume 3. Exit
Enter your choice: 3

Page 15
 EXPERIMENT.NO 4
AIM: To Write a C program to simulate the concept of Dining-Philosophers problem.

DESCRIPTION
The dining-philosophers problem is considered a classic synchronization problem because it is an example of
a large class of concurrency-control problems. It is a simple representation of the need to allocate several
resources among several processes in a deadlock-free and starvation-free manner. Consider five philosophers
who spend their lives thinking and eating. The philosophers share a circular table surrounded by five chairs,
each belonging to one philosopher. In the center of the table is a bowl of rice, and the table is laid with five
single chopsticks. When a philosopher thinks, she does not interact with her colleagues. From time to time, a
philosopher gets hungry and tries to pick up the two chopsticks that are closest to her (the chopsticks that are
between her and her left and right neighbors). A philosopher may pick up only one chopstick at a time.
Obviously, she cam1ot pick up a chopstick that is already in the hand of a neighbor. When a hungry
philosopher has both her chopsticks at the same time, she eats without releasing her chopsticks. When she is
finished eating, she puts down both of her chopsticks and starts thinking again. The dining-philosophers
problem may lead to a deadlock situation and hence some rules have to be framed to avoid the occurrence of
deadlock.

PROGRAM
int tph, philname[20], status[20], howhung, hu[20], cho; main()
{
int i; clrscr();
printf("\n\nDINING PHILOSOPHER PROBLEM");
printf("\nEnter the total no. of philosophers: ");
scanf("%d",&tph);
for(i=0;i<tph;i++)
{
philname[i]=(i+1); status[i]=1;
}
printf("How many are hungry : ");
scanf("%d", &howhung);
if(howhung==tph)
{
printf(“\n All are hungry..\nDead lock stage will occur”);
printf(\n”Exiting\n”);
else{
for(i=0;i<howhung;i++){
printf(“Enterphilosopher%dposition:”,(i+1));
scanf(“%d”,&hu[i]);
status[hu[i]]=2;
}

Page 16
 do
{
printf("1.One can eat at a time\t2.Two can eat at a time
\t3.Exit\nEnter your choice:");
scanf("%d", &cho);
switch(cho)
{
case 1: one();
break;
case 2: two();
break;
case 3: exit(0);

default: printf("\nInvalid option..");

}
}while(1);
}
}
one()
{

int pos=0, x, i;
printf("\nAllow one philosopher to eat at any time\n");
for(i=0;i<howhung; i++, pos++)
{
printf("\nP %d is granted to eat", philname[hu[pos]]);
for(x=pos;x<howhung;x++)
printf("\nP %d is waiting", philname[hu[x]]);

}
}
two()
{
int i, j, s=0, t, r, x;
printf("\n Allow two philosophers to eat at same
time\n"); for(i=0;i<howhung;i++)
{
for(j=i+1;j<howhung;j++)
{
if(abs(hu[i]-hu[j])>=1&& abs(hu[i]-hu[j])!=4)
{
printf("\n\ncombination %d \n", (s+1));
t=hu[i];
r=hu[j]; s++;
printf("\nP %d and P %d are granted to eat", philname[hu[i]],
philname[hu[j]]);

Page 17
 for(x=0;x<howhung;x++)
{
if((hu[x]!=t)&&(hu[x]!=r))
printf("\nP %d is waiting", philname[hu[x]]);
}
}
}
}
}

INPUT
DINING PHILOSOPHER PROBLEM
Enter the total no. of philosophers: 5
How many are hungry : 3
Enter philosopher 1 position: 2
Enter philosopher 2 position: 4
Enter philosopher 3 position: 5

OUTPUT
1. One can eatat a time 2.Two can
eat at a time 3.Exit Enter your choice: 1

Allow one philosopher to eat at any time

P 3 is granted to eat
P 3 is waiting
P 5 is waiting
P 0 is waiting
P 5 is granted to eat
P 5 is waiting
P 0 is waiting
P 0 is granted to eat
P 0 is waiting

Page 18
1.One can eat at a time 2.Two can eat at a time 3.Exit
Enter your choice: 2

Allow two philosophers to eat at same time

combination 1
P 3 and P 5 are granted to eat
P 0 is waiting

combination 2
P 3 and P 0 are granted to eat
P 5 is waiting

combination 3
P 5 and P 0 are granted to eat
P 3 is waiting

1.One can eat at a time 2.Two can

eat at a time 3.Exit Enter your choice: 3

Page 19
 EXPERIMENT.NO 5
MEMORY MANAGEMENT

A). MEMORY MANAGEMENT WITH FIXED PARTITIONING TECHNIQUE (MFT)

AIM: To implement and simulate the MFT algorithm.

DESCRIPTION:

In this the memory is divided in two parts and process is fit into it. The process which is best
suited will be placed in the particular memory where it suits. In MFT, the memory is partitioned
into fixed size partitions and each job is assigned to a partition. The memory assigned to a partition
does not change. In MVT, each job gets just the amount of memory it needs. That is, the partitioning
of memory is dynamic and changes as jobs enter and leave the system. MVT is a more ``efficient''
user of resources. MFT suffers with the problem of internal fragmentation and MVT suffers with
external fragmentation.

ALGORITHM:

Step1: Start the process.

Step2: Declarevariables.
Step3: Enter total memory size ms.
Step4: Allocate memory for os.
Ms=ms-os
Step5: Read the no partition to be divided n Partition size=ms/n.
Step6: Read the process no and process size.
Step 7: If process size is less than partition size allot alse blocke the process. While allocating
update memory wastage-external fragmentation.
if(pn[i]==pn[j])f=1;
if(f==0){ if(ps[i]<=siz)
{
extft=extft+size-
ps[i];avail[i]=1; count++;
}
}
Step 8: Print the results

Page 20
SOURCE CODE :

#include<stdio.h>
#include<conio.h>
main()
{
int ms, bs, nob, ef,n,
mp[10],tif=0; int i,p=0;
clrscr();
printf("Enter the total memory available (in Bytes) -- ");
scanf("%d",&ms);
printf("Enter the block size (in Bytes) -- ");
scanf("%d", &bs);
nob=ms/bs;
ef=ms - nob*bs;
printf("\nEnter the number of processes -- ");
scanf("%d",&n);
for(i=0;i<n;i++)
{
printf("Enter memory required for process %d (in Bytes)-- ",i+1);
scanf("%d",&mp[i]);
}
printf("\nNo. of Blocks available in memory--%d",nob);
printf("\n\nPROCESS\tMEMORYREQUIRED\tALLOCATED\tINTERNAL
FRAGMENTATION");
for(i=0;i<n && p<nob;i++)
{
printf("\n %d\t\t%d",i+1,mp[i]);
if(mp[i] > bs)
printf("\t\tNO\t\t---");
else
{
printf("\t\tYES\t%d",bs-mp[i]);
tif = tif + bs-mp[i];
p++;
}
}
if(i<n)
printf("\nMemory is Full, Remaining Processes cannot be accomodated");
printf("\n\nTotal Internal Fragmentation is %d",tif);
printf("\nTotal External Fragmentation is %d",ef);
getch();
}

Page 21
 INPUT
Enter the total memory available (in Bytes) -- 1000
Enter the block size (in Bytes)-- 300
Enter the number of processes – 5
Enter memory required for process 1 (in Bytes) -- 275
Enter memory required for process 2 (in Bytes) -- 400
Enter memory required for process 3 (in Bytes) -- 290
Enter memory required for process 4 (in Bytes) -- 293
Enter memory required for process 5 (in Bytes) -- 100
No. of Blocks available in memory -- 3

OUTPUT
PROCESS ALLOCAT INTERNAL
MEMORY REQUIRED ED FRAGMENTATION
1 275 YES 25
2 400 NO -----
3 290 YES 10
4 293 YES 7
Memory is Full, Remaining Processes cannot be accommodated Total
Internal Fragmentation is 42
Total External Fragmentation is 100

Page 22
B) MEMORY VARIABLE PARTIONING TYPE (MVT)

AIM: To write a program to simulate the MVT algorithm

ALGORITHM:
Step1: start the process.
Step2: Declare variables.
Step3: Enter total memory size ms.
Step4: Allocate memory for os.
Ms=ms-os
Step5: Read the no partition to be divided n Partition size=ms/n.
Step6: Read the process no and process size.
Step 7: If process size is less than partition size allot alse blocke the process. While allocating
update memory wastage-external fragmentation.
if(pn[i]==pn[j]) f=1;
if(f==0){ if(ps[i]<=size)
{
extft=extft+size-
ps[i];avail[i]=1; count++;
}
}
Step 8: Print the results
Step 9: Stop the process.

Page 23
SOURCE CODE:

#include<stdio.h>
#include<conio.h>
main()
{
int ms,mp[10],i,
temp,n=0; char ch = 'y';
clrscr();
printf("\nEnter the total memory available (in Bytes)-- ");
scanf("%d",&ms);
temp=ms;
for(i=0;ch=='y';i++,n++)
{
printf("\nEnter memory required for process %d (in Bytes) -- ",i+1);
scanf("%d",&mp[i]);
if(mp[i]<=temp)
{
printf("\nMemory is allocated for Process %d ",i+1);
temp = temp - mp[i];
}
else
{
printf("\nMemory is Full"); break;
}
printf("\nDo you want to continue(y/n) -- ");
scanf(" %c", &ch);
}
printf("\n\nTotal Memory Available -- %d", ms);
printf("\n\n\tPROCESS\t\t MEMORY ALLOCATED ");
for(i=0;i<n;i++)
printf("\n \t%d\t\t%d",i+1,mp[i]);
printf("\n\nTotal Memory Allocated is %d",ms-temp);
printf("\nTotal External Fragmentation is %d",temp);
getch();
}

Page 24
 OUTPUT:

Enter the total memory available (in Bytes) – 1000

Enter memory required for process 1 (in Bytes) – 400
Memory is allocated for Process 1
Do you want to continue(y/n) -- y
Enter memory required for process 2 (in Bytes) -- 275
Memory is allocated for Process 2
Do you want to continue(y/n) – y
Enter memory required for process 3 (in Bytes) – 550

Memory is Full

Total Memory Available – 1000

PROCESS MEMORY ALLOCATED

1 400
2 275

Total Memory Allocated is 675

Total External Fragmentation is 325

VIVA QUESTIONS
1) What is MFT?
2) What is MVT?
3) What is the difference between MVT and MFT?
4) What is meant by fragmentation?
5) Give the difference between internal and external fragmentation

Page 25
EXPERIMENT.NO 6
MEMORY ALLOCATION TECHNIQUES

AIM: To Write a C program to simulate the following contiguous memory allocation techniques
a) Worst-fit b) Best-fit c) First-fit

DESCRIPTION
One of the simplest methods for memory allocation is to divide memory into several fixed-sized partitions.
Each partition may contain exactly one process. In this multiple-partition method, when a partition is free,
a process is selected from the input queue and is loaded into the free partition. When the process terminates,
the partition becomes available for another process. The operating system keeps a table indicating which
parts of memory are available and which are occupied. Finally, when a process arrives and needs memory,
a memory section large enough for this process is provided. When it is time to load or swap a process into
main memory, and if there is more than one free block of memory of sufficient size, then the operating
system must decide which free block to allocate. Best-fit strategy chooses the block that is closest in size
to the request. First-fit chooses the first available block that is large enough. Worst-fit chooses the largest
available block.

PROGRAM

WORST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int
frag[max],b[max],f[max],i,j,nb,nf,t
emp; static int bf[max],ff[max];
clrscr();
printf("\n\tMemory Management Scheme - First Fit");
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
{
printf("Block %d:",i);
scanf("%d",&b[i]);
}
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);

Page 26
 }
for(i=1;i<=nf;i++)
{
for(j=1;j<=nb;j++)
{
if(bf[j]!=1)
{
temp=b[j]-f[i];
if(temp>=0)
{
ff[i]=j;
break;
}
}
}
frag[i]=temp;
bf[ff[i]]=1;
}
printf("\nFile_no:\tFile_size :\tBlock_no:\tBlock_size:\tFragement");
for(i=1;i<=nf;i++)
printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}
INPUT

Enter the number of blocks: 3

Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 1 5 4
2 4 3 7 3

Page 27
BEST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int frag[max],b[max],f[max],i,j,nb,nf,temp,lowest=10000;
static int bf[max],ff[max];
clrscr();
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
printf("Block %d:",i);
scanf("%d",&b[i]);
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);
}
for(i=1;i<=nf;i++)
{
for(j=1;j<=nb;j++)
{
if(bf[j]!=1)
{
temp=b[j]-f[i];
if(temp>=0)
if(lowest>temp)
{
ff[i]=j;
lowest=temp;
}
}}
frag[i]=lowest; bf[ff[i]]=1; lowest=10000;
}
printf("\nFile No\tFile Size \tBlock No\tBlock
Size\tFragment"); for(i=1;i<=nf && ff[i]!=0;i++)

printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}

Page 28
INPUT
Enter the number of blocks: 3
Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 2 2 1
2 4 1 5 1

FIRST-FIT
#include<stdio.h>
#include<conio.h>
#define max 25
void main()
{
int
frag[max],b[max],f[max],i,j,nb,nf,temp,highes
t=0; static int bf[max],ff[max];
clrscr();
printf("\n\tMemory Management Scheme - Worst Fit");
printf("\nEnter the number of blocks:");
scanf("%d",&nb);
printf("Enter the number of files:");
scanf("%d",&nf);
printf("\nEnter the size of the blocks:-\n");
for(i=1;i<=nb;i++)
{
printf("Block %d:",i);
scanf("%d",&b[i]);
}
printf("Enter the size of the files :-\n");
for(i=1;i<=nf;i++)
{
printf("File %d:",i);
scanf("%d",&f[i]);
}

Page 29
 for(i=1;i<=nf;i++)
{
for(j=1;j<=nb;j++)
{
if(bf[j]!=1) //if bf[j] is not allocated
{
temp=b[j]-f[i];
if(temp>=0)
if(highest<temp)
{
}
}
frag[i]=highest; bf[ff[i]]=1; highest=0;
}
ff[i]=j; highest=temp;
}
printf("\nFile_no:\tFile_size:\tBlock_no:\tBlock_size:\tFragement");
for(i=1;i<=nf;i++)
printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]);
getch();
}

INPUT
Enter the number of blocks: 3
Enter the number of files: 2

Enter the size of the blocks:-

Block 1: 5
Block 2: 2
Block 3: 7

Enter the size of the files:-

File 1: 1
File 2: 4

OUTPUT
File No File Size Block No Block Size Fragment
1 1 3 7 6
2 4 1 5 1

Page 30
 EXPERIMENT NO.7

PAGE REPLACEMENT ALGORITHMS

AIM: To implement FIFO page replacement technique.

a) FIFO b) LRU c) OPTIMAL

DESCRIPTION:
Page replacement algorithms are an important part of virtual memory management and it helps the OS to
decide which memory page can be moved out making space for the currently needed page. However, the
ultimate objective of all page replacement algorithms is to reduce the number of page faults.
FIFO-This is the simplest page replacement algorithm. In this algorithm, the operating system keeps track
of all pages in the memory in a queue, the oldest page is in the front of the queue. When a page needs to be
replaced page in the front of the queue is selected for removal.

LRU-In this algorithm page will be replaced which is least recently used

OPTIMAL- In this algorithm, pages are replaced which would not be used for the longest duration of time
in the future. This algorithm will give us less page fault when compared to other page replacement
algorithms.

ALGORITHM:
1. Start the process
2. Read number of pages n
3. Read number of pages no
4. Read page numbers into an array a[i]
5. Initialize avail[i]=0 .to check page hit
6. Replace the page with circular queue, while re-placing check page availability in the frame
Place avail[i]=1 if page is placed in theframe Count page faults
7. Print the results.
8. Stop the process.

Page 31
A) FIRST IN FIRST OUT
SOURCE CODE :

#include<stdio.h>
#include<conio.h> int fr[3];
void main()
{
void display();
int i,j,page[12]={2,3,2,1,5,2,4,5,3,2,5,2};
int
flag1=0,flag2=0,pf=0,frsize=3,top=0;
clrscr();
for(i=0;i<3;i++)
{
fr[i]=-1;
}
for(j=0;j<12;j++)
{
flag1=0; flag2=0; for(i=0;i<12;i++)
{
if(fr[i]==page[j])
{
flag1=1; flag2=1; break;
}
}
if(flag1==0)
{
for(i=0;i<frsize;i++)
{
if(fr[i]==-1)
{
fr[i]=page[j]; flag2=1; break;
}
}
}
if(flag2==0)
{
fr[top]=page[j];
top++;
pf++;
if(top>=frsize)
top=0;
}
display();
}

Page 32
printf("Number of page faults : %d ",pf+frsize);
getch();
}
void display()
{
int i; printf("\n");
for(i=0;i<3;i++)
printf("%d\t",fr[i]);
}

OUTPUT:

2 -1 -1
2 3 -1
2 3 -1
2 3 1
5 3 1
5 2 1
5 2 4
5 2 4
3 2 4
3 2 4
3 5 4
3 5 2

Number of page faults: 9

Page 33
 B) LEAST RECENTLY USED

AIM: To implement LRU page replacement technique.

ALGORITHM:

1. Start the process

2. Declare the size
3. Get the number of pages to be inserted
4. Get the value
5. Declare counter and stack
6. Select the least recently used page by counter value
7. Stack them according the selection.
8. Display the values
9. Stop the process

SOURCE CODE :

#include<stdio.h>
#include<conio.h>
int fr[3];
void main()
{
void display();
int p[12]={2,3,2,1,5,2,4,5,3,2,5,2},i,j,fs[3];
int index,k,l,flag1=0,flag2=0,pf=0,frsize=3;
clrscr();
for(i=0;i<3;i++)
{
fr[i]=-1;
}
for(j=0;j<12;j++)
{
flag1=0,flag2=0;
for(i=0;i<3;i++)
{
if(fr[i]==p[j])
{
flag1=1;
flag2=1; break;
}
}
if(flag1==0)

Page 34
{
for(i=0;i<3;i++)
{
if(fr[i]==-1)
{
fr[i]=p[j]; flag2=1;
break;
}
}
}
if(flag2==0)
{
for(i=0;i<3;i++)
fs[i]=0;
for(k=j-1,l=1;l<=frsize-1;l++,k--)
{
for(i=0;i<3;i++)
{
if(fr[i]==p[k]) fs[i]=1;
}}
for(i=0;i<3;i++)
{
if(fs[i]==0)
index=i;
}
fr[index]=p[j];
pf++;
}
display();
}
printf("\n no of page faults :%d",pf+frsize);
getch();
}
void display()
{
int i; printf("\n");
for(i=0;i<3;i++)
printf("\t%d",fr[i]);
}

Page 35
OUTPUT:

2 -1 -1
2 3 -1
2 3 -1
2 3 1
2 5 1
2 5 1
2 5 4
2 5 4
3 5 4
3 5 2
3 5 2
3 5 2

No of page faults: 7

Page 36
 C) OPTIMAL

AIM: To implement optimal page replacement technique.

ALGORTHIM:

1. Start Program
2. Read Number Of Pages And Frames
3. Read Each Page Value
4. Search For Page In The Frames
5. If Not Available Allocate Free Frame
6. If No Frames Is Free Repalce The Page With The Page That Is Leastly Used
7. Print Page Number Of Page Faults
8. Stop process.

SOURCE CODE:

/* Program to simulate optimal page replacement */

#include<stdio.h>
#include<conio.h>
int fr[3], n, m;
void
display();
void main()
{
int i,j,page[20],fs[10];
int
max,found=0,lg[3],index,k,l,flag1=0,flag2=0,pf=0;
float pr;
clrscr();
printf("Enter length of the reference string: ");
scanf("%d",&n);
printf("Enter the reference string: ");
for(i=0;i<n;i++)
scanf("%d",&page[i]);
printf("Enter no of frames: ");
scanf("%d",&m);
for(i=0;i<m;i++)
fr[i]=-1; pf=m;

Page 37
for(j=0;j<n;j++)
{
flag1=0; flag2=0;
for(i=0;i<m;i++)
{
if(fr[i]==page[j])
{
flag1=1; flag2=1;
break;
}
}
if(flag1==0)
{
for(i=0;i<m;i++)
{
if(fr[i]==-1)
{
fr[i]=page[j]; flag2=1;
break;
}
}
}
if(flag2==0)
{
for(i=0;i<m;i++)
lg[i]=0;
for(i=0;i<m;i++)
{
for(k=j+1;k<=n;k++)
{
if(fr[i]==page[k])
{
lg[i]=k-j;
break;
}
}
}
found=0;
for(i=0;i<m;i++)
{
if(lg[i]==0)
{
index=i;
found = 1;

Page 38
 break;
}
}
if(found==0)
{
max=lg[0]; index=0;
for(i=0;i<m;i++)
{
if(max<lg[i])
{
max=lg[i];
index=i;
}
}
}
fr[index]=page[j];
pf++;
}
display();
}
printf("Number of page faults : %d\n", pf);
pr=(float)pf/n*100;
printf("Page fault rate = %f \n", pr); getch();
}
void display()
{
int i; for(i=0;i<m;i++)
printf("%d\t",fr[i]);
printf("\n");
}

Page 39
 OUTPUT:
Enter length of the reference string: 12
Enter the reference string: 1 2 3 4 1 2 5 1 2 3 4 5
Enter no of frames: 3
1 -1 -1
1 2 -1
123
124
124
124
125
125
125
325
425
425
Number of page faults : 7 Page fault rate = 58.333332

VIVA QUESTIONS
1) What is meant by page fault?
2) What is meant by paging?
3) What is page hit and page fault rate?
4) List the various page replacement algorithm
5) Which one is the best replacement algorithm?

Page 40
EXPERIMENT NO. 8
FILE ORGANIZATION TECHNIQUES

A) SINGLE LEVEL DIRECTORY:

AIM: Program to simulate Single level directory file organization technique.

DESCRIPTION:
The directory structure is the organization of files into a hierarchy of folders. In a single-level
directory system, all the files are placed in one directory. There is a root directory which has all
files. It has a simple architecture and there are no sub directories. Advantage of single level
directory system is that it is easy to find a file in the directory.

SOURCE CODE :
#include<stdio.h>
struct
{
char dname[10],fname[10][10];
int fcnt;
}dir;

void main()
{
int i,ch; char
f[30]; clrscr();
dir.fcnt = 0;
printf("\nEnter name of directory -- ");
scanf("%s", dir.dname);
while(1)
{
printf("\n\n1. Create File\t2. Delete File\t3. Search File \n
4. Display Files\t5. Exit\nEnter your choice -- ");
scanf("%d",&ch);
switch(ch)
{
case 1: printf("\nEnter the name of the file -- ");
scanf("%s",dir.fname[dir.fcnt]);
dir.fcnt++; break;
case 2: printf("\nEnter the name of the file -- ");
scanf("%s",f);
for(i=0;i<dir.fcnt;i++)
{
if(strcmp(f, dir.fname[i])==0)
{
printf("File %s is deleted ",f); strcpy(dir.fname[i],dir.fname[dir.fcnt-1]); break;
}

Page 41
 }
if(i==dir.fcnt)
printf("File %s not found",f);
else

dir.fcnt--;
break;
case 3: printf("\nEnter the name of the file -- ");
scanf("%s",f);
for(i=0;i<dir.fcnt;i++)
{
if(strcmp(f, dir.fname[i])==0)
{
printf("File %s is found ", f);
break;
}
}
if(i==dir.fcnt)
printf("File %s not found",f);
break;
case 4: if(dir.fcnt==0)
printf("\nDirectory Empty");
else
{
printf("\nThe Files are -- ");
for(i=0;i<dir.fcnt;i++)
printf("\t%s",dir.fname[i]);
}
break;
default: exit(0);
}
}
getch();}

Page 42
OUTPUT:

Enter name of directory -- CSE

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 1

Enter the name of the file -- A

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 1

Enter the name of the file -- B

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 1

Enter the name of the file -- C

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 4

The Files are -- A B C

1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 3

Enter the name of the file – ABC File

ABC not found
1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 2

Enter the name of the file – B

File B is deleted
1. Create File 2. Delete File 3. Search File
4. Display Files 5. Exit Enter your choice – 5

Page 43
B) TWO LEVEL DIRECTORY

AIM: Program to simulate two level file organization technique

Description:
In the two-level directory system, each user has own user file directory (UFD). The system
maintains a master block that has one entry for each user. This master block contains the addresses
of the directory of the users. When a user job starts or a user logs in, the system's master file
directory (MFD) is searched. When a user refers to a particular file, only his own UFD is searched.

SOURCE CODE :

#include<stdio.h>
struct
{
char dname[10],fname[10][10];
int fcnt;
}dir[10];

void main()
{
int i,ch,dcnt,k; char
f[30], d[30]; clrscr();
dcnt=0;
while(1)
{
printf("\n\n1. Create Directory\t2. Create File\t3. Delete File");
printf("\n4. Search File\t\t5. Display\t6. Exit\t Enter your choice --");
scanf("%d",&ch);
switch(ch)
{
case 1: printf("\nEnter name of directory -- ");
scanf("%s", dir[dcnt].dname);
dir[dcnt].fcnt=0;
dcnt++;
printf("Directory created"); break;
case 2: printf("\nEnter name of the directory -- ");
scanf("%s",d);
for(i=0;i<dcnt;i++)
if(strcmp(d,dir[i].dname)==0)
{
printf("Enter name of the file -- ");
scanf("%s",dir[i].fname[dir[i].fcnt]);

Page 44
 dir[i].fcnt++;
printf("File created");
}
if(i==dcnt)
printf("Directory %s not found",d);
break;
case 3: printf("\nEnter name of the directory -- ");
scanf("%s",d);
for(i=0;i<dcnt;i++)
for(i=0;i<dcnt;i++)
{
if(strcmp(d,dir[i].dname)==0)
{
printf("Enter name of the file -- ");
scanf("%s",f);
for(k=0;k<dir[i].fcnt;k++)
{
if(strcmp(f, dir[i].fname[k])==0)
{
printf("File %s is deleted ",f);
dir[i].fcnt--;
strcpy(dir[i].fname[k],dir[i].fname[dir[i].fcnt]);
goto jmp;
}
}

printf("File %s not found",f); goto jmp;

}
}
printf("Directory %s not found",d);
jmp : break;
case 4: printf("\nEnter name of the directory -- ");
scanf("%s",d);
for(i=0;i<dcnt;i++)
{
if(strcmp(d,dir[i].dname)==0)
{
printf("Enter the name of the file -- ");
scanf("%s",f);
for(k=0;k<dir[i].fcnt;k++)
{
if(strcmp(f, dir[i].fname[k])==0)
{
printf("File %s is found ",f); goto jmp1;
}
}
printf("File %s not found",f); goto jmp1;
} Page 44
}
 printf("Directory %s not found",d); jmp1: break;
case 5: if(dcnt==0)
printf("\nNo Directory's ");
else
{
printf("\nDirectory\tFiles");
for(i=0;i<dcnt;i++)
{
printf("\n%s\t\t",dir[i].dname);
for(k=0;k<dir[i].fcnt;k++)
printf("\t%s",dir[i].fname[k]);
}
}
break;

default:exit(0);
}
}
getch();
}

Page 45
OUTPUT

1. Create Directory 2. Create File 3. Delete File

4. Search File 5. Display 6. Exit
Enter your choice -- 1
Enter name of directory -- DIR1 Directory created

1. Create Directory 2. Create File 3. Delete File

4. Search File 5. Display 6. Exit Enter your choice -- 1
Enter name of directory -- DIR2 Directory created
1. Create Directory 2. Create File 3. Delete File
4. Search File 5. Display 6. Exit Enter your choice -- 2
Enter name of the directory – DIR1
Enter name of the file -- A1
File created
1. Create Directory 2. Create File 3. Delete File
4. Search File 5. Display 6. Exit
Enter your choice -- 2
Enter name of the directory – DIR1

Enter name of the file -- A2

File created
1. Create Directory 2. Create File 3. Delete File
4. Search File 5. Display 6.
Exit Enter your choice – 6

VIVA QUESTIONS
1. Define directory?
2. List the different types of directory structures?
3. What is the advantage of hierarchical directory structure?
4. Which of the directory structures is efficient? Why?
5. What is acyclic graph directory?

Page 46
 EXPERIMENT.NO.9
FILE ALLOCATION STRATEGIES

A) SEQUENTIAL:
AIM: To write a C program for implementing sequential file allocation method

DESCRIPTION:
The most common form of file structure is the sequential file in this type of file,
a fixed format is used for records. All records (of the system) have the same length,
consisting of the same number of fixed length fields in a particular order because the length
and position of each field are known, only the values of fields need to be stored, the field
name and length for each field are attributes of the file structure.

ALGORITHM:

Step 1: Start the program.

Step 2: Get the number of files.
Step 3: Get the memory requirement of each file.
Step 4: Allocate the required locations to each in sequential order a).
Randomly select a location from availablelocation s1= random(100);
a) Check whether the required locations are free from the selected
location.
if(b[s1].flag==0){
for (j=s1;j<s1+p[i];j++){
if((b[j].flag)==0)count++;
}
if(count==p[i]) break;
}
b) Allocate and set flag=1 to the allocated locations. for(s=s1;s<(s1+p[i]);s++)
{
k[i][j]=s; j=j+1; b[s].bno=s;
b[s].flag=1;
}

Step 5: Print the results file no, length, Blocks allocated. Step
6: Stop the program

Page 47
SOURCE CODE :

#include<stdio.h>
main()
{
int f[50],i,st,j,len,c,k;
clrscr();
for(i=0;i<50;i++)
f[i]=0;
X:
printf("\n Enter the starting block & length of file");
scanf("%d%d",&st,&len);
for(j=st;j<(st+len);j++)
if(f[j]==0)
{
f[j]=1
;
printf("\n%d->%d",j,f[j]);
}
else
{
printf("Block already allocated");
break;
}
if(j==(st+len))
printf("\n the file is allocated to disk");
printf("\n if u want to enter more files?(y-1/n-0)");
scanf("%d",&c);
if(c==1)
goto X;
else
exit();
getch();
}

Page 48
OUTPUT:
Enter the starting block & length of file 4 10
4->1
5->1
6->1
7->1
8->1
9->1
10->1
11->1
12->1
13->1
The file is allocated to disk.

Page 49
B) INDEXED:

AIM: To implement allocation method using chained method

DESCRIPTION:
In the chained method file allocation table contains a field which points to starting block
of memory. From it for each bloc a pointer is kept to next successive block. Hence, there is no
external fragmentation.

ALGORITHM:

Step 1: Start the program.

Step 2: Get the number of files.
Step 3: Get the memory requirement of each file.
Step 4: Allocate the required locations by selecting a location randomly q= random(100);
a) Check whether the selected location is free .
b) If the location is free allocate and set flag=1 to the allocated locations.

q=random(100);
{
if(b[q].flag==0)
b[q].flag=1;
b[q].fno=j;
r[i][j]=q;
Step 5: Print the results file no, length ,Blocks
allocated.
Step 6: Stop the program

Page 50
 SOURCE CODE :

#include<stdio.h>
int f[50],i,k,j,inde[50],n,c,count=0,p;
main()
{
clrscr();
for(i=0;i<50;i++)
f[i]=0;
x: printf("enter index block\t");
scanf("%d",&p);
if(f[p]==0)
{
f[p]=1;
printf("enter no of files on index\t");
scanf("%d",&n);
}
else
{
printf("Block already allocated\n");
goto x;
}
for(i=0;i<n;i++)
scanf("%d",&inde[i]);
for(i=0;i<n;i++)
if(f[inde[i]]==1)
{
printf("Block already allocated");
goto x;
}
for(j=0;j<n;j++)
f[inde[j]]=1;
printf("\n allocated");
printf("\n file indexed");
for(k=0;k<n;k++)
printf("\n %d->%d:%d",p,inde[k],f[inde[k]]);
printf(" Enter 1 to enter more files and 0 to exit\t");
scanf("%d",&c);
if(c==1)
goto x;
else
exit();
getch();
}

Page 51
OUTPUT: enter index block 9
Enter no of files on index 3 1
23
Allocated
File indexed
9->1:1
9->2;1
9->3:1 enter 1 to enter more files and 0 to exit

Page 52
 C) LINKED:

AIM: To implement linked file allocation technique.

DESCRIPTION:
In the chained method file allocation table contains a field which points to starting
block of memory. From it for each bloc a pointer is kept to next successive block. Hence, there
is no external fragmentation

ALGORTHIM:
Step 1: Start the program.
Step 2: Get the number of
files.
Step 3: Get the memory requirement of each file.
Step 4: Allocate the required locations by selecting a location randomly q=
random(100);
a) Check whether the selected location is free .
b) If the location is free allocate and set flag=1 to the allocated locations.
While allocating next location address to attach it to previous location

for(i=0;i<n;i++)
{
for(j=0;j<s[i];j++)
{
q=random(100); if(b[q].flag==0)
b[q].flag=1;
b[q].fno=j;
r[i][j]=q;
if(j>0)
{
}
}
p=r[i][j-1]; b[p].next=q;}
Step 5: Print the results file no, length ,Blocks
allocated.
Step 6: Stop the program

Page 53
SOURCE CODE :
#include<stdio.h>
main()
{
int f[50],p,i,j,k,a,st,len,n,c;
clrscr();
for(i=0;i<50;i++) f[i]=0;
printf("Enter how many blocks that are already
allocated"); scanf("%d",&p);
printf("\nEnter the blocks no.s that are already allocated");
for(i=0;i<p;i++)
{
scanf("%d",&a);
f[a]=1;
}
X:
printf("Enter the starting index block &
length"); scanf("%d%d",&st,&len); k=len;
for(j=st;j<(k+st);j++)
{
if(f[j]==0)
{ f[j]=1;
printf("\n%d->%d",j,f[j]);
}
else
{
printf("\n %d->file is already
allocated",j);
k++;
}
}
printf("\n If u want to enter one
more file? (yes-1/no-0)");
scanf("%d",&c);
if(c==1)
goto
X;
else
exit();
getch( );}

Page 54
 OUTPUT:

Enter how many blocks that are already allocated 3 Enter the blocks no.s
that are already allocated 4 7 Enter the starting index block & length 3 7 9
3->1
4->1 file is already allocated
5->1
6->1
7->1 file is already allocated
8->1
9->1file is already allocated
10->1
11->1
12->1

VIVA QUESTIONS
1) List the various types of files
2) What are the various file allocation strategies?
3) What is linked allocation?
4) What are the advantages of linked allocation?
5) What are the disadvantages of sequential allocation methods?

Page 55
 EXPERIMENT.NO 10
DEAD LOCK AVOIDANCE

AIM: To Simulate bankers algorithm for Dead Lock Avoidance (Banker‘s Algorithm)

DESCRIPTION:
Deadlock is a situation where in two or more competing actions are waiting f or the other to
finish, and thus neither ever does. When a new process enters a system, it must declare the
maximum number of instances of each resource type it needed. This number may exceed the
total number of resources in the system. When the user request a set of resources, the system
must determine whether the allocation of each resources will leave the system in safe state. If
it will the resources are allocation; otherwise the process must wait until some other process
release the resources.
Data structures
n-Number of process, m-number of resource types.
Available: Available[j]=k, k – instance of resource type Rj is available. Max: If
max[i, j]=k, Pi may request at most k instances resource Rj.
Allocation: If Allocation [i, j]=k, Pi allocated to k instances of resource Rj Need: If Need[I,
j]=k, Pi may need k more instances of resource type Rj, Need[I, j]=Max[I, j]- Allocation[I,
j];
Safety Algorithm
1. Work and Finish be the vector of length m and n respectively, Work=Available and
Finish[i] =False.
2. Find an i such that both
Finish[i] =False
Need<=Work If no such I
exists go to step 4.
3. work= work + Allocation, Finish[i] =True;
4. if Finish[1]=True for all I, then the system is in safe state.
Resource request algorithm
Let Request i be request vector for the process Pi, If request i=[j]=k, then process Pi
wants k instances of resource type Rj.
1. if Request<=Need I go to step 2. Otherwise raise an error condition.
2. if Request<=Available go to step 3. Otherwise Pi must since the resources are
available.
3. Have the system pretend to have allocated the requested resources to process Pi by
modifying the state as follows;
Available=Available-Request I;
Allocation I=Allocation +Request I;
Need i=Need i- Request I;
If the resulting resource allocation state is safe, the transaction is completed and process Pi is
allocated its resources. However if the state is unsafe, the Pi must wait for Request i and the old
resource-allocation state is restored.

Page 56
 ALGORITHM:
1. Start the program.
2. Get the values of resources and processes.
3. Get the avail value.
4. After allocation find the need value.
5. Check whether its possible to allocate.
6. If it is possible then the system is in safe state.
7. Else system is not in safety state.
8. If the new request comes then check that the system is in safety.
9. or not if we allow the request.
10. stop the program.
11. end

SOURCE CODE :

#include<stdio.h>
#include<conio.h>
#include<string.h>
void main()
{
int alloc[10][10],max[10][10];
int avail[10],work[10],total[10];
int i,j,k,n,need[10][10];
int m;
int count=0,c=0;
char finish[10];
clrscr();
printf("Enter the no. of processes and resources:");
scanf("%d%d",&n,&m);
for(i=0;i<=n;i++)
finish[i]='n';
printf("Enter the claim matrix:\n");
for(i=0;i<n;i++)
for(j=0;j<m;j++)
scanf("%d",&max[i][j]);
printf("Enter the allocation matrix:\n");
for(i=0;i<n;i++)
for(j=0;j<m;j++)
scanf("%d",&alloc[i][j]);
printf("Resource vector:");
for(i=0;i<m;i++)
scanf("%d",&total[i]);
for(i=0;i<m;i++)
avail[i]=0; for(i=0;i<n;i++)

Page 57
for(j=0;j<m;j++)
avail[j]+=alloc[i][j];
for(i=0;i<m;i++)
work[i]=avail[i];
for(j=0;j<m;j++)
work[j]=total[j]-work[j];
for(i=0;i<n;i++)
for(j=0;j<m;j++)
need[i][j]=max[i][j]-alloc[i][j];
A:
for(i=0;i<n;i++)
{
c=0;
for(j=0;j<m;j++)
if((need[i][j]<=work[j])&&(finish[i]=='n'))
c++;
if(c==m)
{
printf("All the resources can be allocated to Process %d", i+1);
printf("\n\nAvailable resources are:");
for(k=0;k<m;k++)
{
work[k]+=alloc[i][k];
printf("%4d",work[k]);
}
printf("\n");
finish[i]='y';
printf("\nProcess %d executed?:%c \n",i+1,finish[i]);
count++;
}
}
if(count!=n)
goto A;
else
printf("\n System is in safe mode");
printf("\n The given state is safe state");
getch();
}

Page 58
 OUTPUT

Enter the no. of processes and resources: 4 3

Enter the claim matrix:
322
613
314
422
Enter the allocation matrix:
100
612
211
002
Resource vector:9 3 6
All the resources can be allocated to Process 2
Available resources are: 6 2 3
Process 2 executed?:y
All the resources can be allocated to Process 3 Available resources
are: 8 3 4
Process 3 executed?:y
All the resources can be allocated to Process 4 Available resources
are: 8 3 6
Process 4 executed?:y
All the resources can be allocated to Process 1
Available resources are: 9 3 6
Process 1 executed?:y
System is in safe mode
The given state is safe state

VIVA QUESTIONS
1) What is meant by deadlock?
2) What is safe state in banker’s algorithms?
3) What is banker’s algorithm?
4) What are the necessary conditions where deadlock occurs?
5) What are the principles and goals of protection?

Page 59
 EXPERIMENT.NO 11
DEAD LOCKPREVENTION

AIM: To implement deadlock prevention technique

Banker‘s Algorithm:

When a new process enters a system, it must declare the maximum number of
instances of each resource type it needed. This number may exceed the total number of
resources in the system. When the user request a set of resources, the system must
determine whether the allocation of each resources will leave the system in safe state. If
it will the resources are allocation; otherwise the process must wait until some other
process release the resources.

DESCRIPTION:

Data structures

n-Number of process, m-number of resource types.

Available: Available[j]=k, k – instance of resource type Rj is available.

Max: If max[i, j]=k, Pi may request at most k instances resource Rj.
Allocation: If Allocation [i, j]=k, Pi allocated to k instances of resource Rj Need:
If Need[I, j]=k, Pi may need k more instances of resource type Rj,
Need[I, j]=Max[I, j]-Allocation[I, j];

Safety Algorithm

Work and Finish be the vector of length m and n respectively, Work=Available

and Finish[i] =False.
Find an i such
that both Finish[i] =False
Need<=Work

If no such I exists go to step 4.

5. work=work+Allocation, Finish[i] =True;

if Finish[1]=True for all I, then the system is in safe state

Page 60
 ALGORITHM:

1. Start the program.

2. Get the values of resources and processes.

3. Get the avail value.

4. After allocation find the need value.

5. Check whether its possible to allocate.

6. If it is possible then the system is in safe state.

7. Else system is not in safety state

8. Stop the process.

SOURCE CODE :

#include<stdio.h>
#include<conio.h>
void main()
{
char job[10][10];
int time[10],avail,tem[10],temp[10]; int safe[10];
int ind=1,i,j,q,n,t;
clrscr();
printf("Enter no of jobs: ");
scanf("%d",&n);
for(i=0;i<n;i++)
{
printf("Enter name and time: ");
scanf("%s%d",&job[i],&time[i]);
}
printf("Enter the available resources:");
scanf("%d",&avail);
for(i=0;i<n;i++)
{
temp[i]=time[i];
tem[i]=i;
}
for(i=0;i<n;i++)
for(j=i+1;j<n;j++)
{
if(temp[i]>temp[j])
{
t=temp[i];

Page 61
temp[i]=temp[j];
temp[j]=t; t=tem[i];
tem[i]=tem[j];
tem[j]=t;
}
}
for(i=0;i<n;i++)
{
q=tem[i];
if(time[q]<=avail)
{
safe[ind]=tem[i];
avail=avail-tem[q];
printf("%s",job[safe[ind]]);
ind++;
}
else
{
printf("No safe sequence\n");
}
}
printf("Safe sequence is:");
for(i=1;i<ind; i++)
printf("%s %d\n",job[safe[i]],time[safe[i]]);
getch();
}

OUTPUT:

Enter no of jobs:4
Enter name and time: A 1
Enter name and time: B 4
Enter name and time: C 2
Enter name and time: D 3
Enter the available resources: 20
Safe sequence is: A 1, C 2, D 3, B 4.

Page 62
EXPERIMENT.NO 12
AIM: To Write a C program to simulate disk scheduling algorithms
a) FCFS b) SCAN c) C-SCAN

DESCRIPTION
One of the responsibilities of the operating system is to use the hardware efficiently. For the disk
drives, meeting this responsibility entails having fast access time and large disk bandwidth. Both
the access time and the bandwidth can be improved by managing the order in which disk I/O
requests are serviced which is called as disk scheduling. The simplest form of disk scheduling
is, of course, the first-come, first-served (FCFS) algorithm. This algorithm is intrinsically fair,
but it generally does not provide the fastest service. In the SCAN algorithm, the disk arm starts
at one end, and moves towards the other end, servicing requests as it reaches each cylinder, until
it gets to the other end of the disk. At the other end, the direction of head movement is reversed,
and servicing continues. The head continuously scans back and forth across the disk. C-SCAN
is a variant of SCAN designed to provide a more uniform wait time. Like SCAN, C-SCAN
moves the head from one end of the disk to the other, servicing requests along the way. When
the head reaches the other end, however, it immediately returns to the beginning of the disk
without servicing any requests on the return trip

PROGRAM

A) FCFS DISK SCHEDULING ALGORITHM

#include<stdio.h>
main()
{
int t[20], n, I, j, tohm[20], tot=0; float avhm;
clrscr();
printf(“enter the no.of tracks”);
scanf(“%d”,&n);
printf(“enter the tracks to be traversed”);
for(i=2;i<n+2;i++)
scanf(“%d”,&t*i+);
for(i=1;i<n+1;i++)
{
tohm[i]=t[i+1]-t[i];
if(tohm[i]<0)
tohm[i]=tohm[i]*(-1);
}
for(i=1;i<n+1;i++)
tot+=tohm[i];
avhm=(float)tot/n;
printf(“Tracks traversed\tDifference between tracks\n”);
for(i=1;i<n+1;i++)
printf(“%d\t\t\t%d\n”,t*i+,tohm*i+);
printf("\nAverage header movements:%f",avhm);
getch();
}

Page 63
INPUT
Enter no.of tracks:9
Enter track position:55 58 60 70 18 90 150 160 184

OUTPUT
Tracks traversed Difference between tracks
55 45
58 3
60 2
70 10
18 52
90 72
150 60
160 10
184 24

Average header movements:30.888889

Page 64
B) SCAN DISK SCHEDULING ALGORITHM
#include<stdio.h>
main()
{
int t[20], d[20], h, i, j, n, temp, k, atr[20], tot, p, sum=0;
clrscr();
printf("enter the no of tracks to be traveresed");
scanf("%d'",&n);
printf("enter the position of head");
scanf("%d",&h);
t[0]=0;t[1]=h;
printf("enter the tracks");
for(i=2;i<n+2;i++)
scanf("%d",&t[i]);
for(i=0;i<n+2;i++)
{
for(j=0;j<(n+2)-i-1;j++)
{
if(t[j]>t[j+1])
{
temp=t[j];
t[j]=t[j+1];
t[j+1]=temp;
}}}
for(i=0;i<n+2;i++)
if(t[i]==h)
j=i;k=i;
p=0;
while(t[j]!=0)
{
atr[p]=t[j]; j--;
p++;
}
atr[p]=t[j];
for(p=k+1;p<n+2;p++,k++)
atr[p]=t[k+1];
for(j=0;j<n+1;j++)
{
if(atr[j]>atr[j+1])
d[j]=atr[j]-atr[j+1];
else
d[j]=atr[j+1]-atr[j];
sum+=d[j];
}
printf("\nAverage header movements:%f",(float)sum/n);
getch();}

Page 65
INPUT
Enter no.of tracks:9
Enter track position:55 58 60 70 18 90 150 160 184
OUTPUT
Tracks traversed Difference between tracks

150 50
160 10
184 24
90 94
70 20
60 10
58 2
55 3
18 37

Average header movements: 27.77

Page 66
 C) C-SCAN DISK SCHEDULING ALGORITHM
#include<stdio.h>
main()
{
int t[20], d[20], h, i, j, n, temp, k, atr[20], tot, p, sum=0;
clrscr();
printf("enter the no of tracks to be traveresed");
scanf("%d'",&n);
printf("enter the position of head");
scanf("%d",&h);
t[0]=0;t[1]=h;
printf("enter total tracks");
scanf("%d",&tot);
t[2]=tot-1;
printf("enter the tracks");
for(i=3;i<=n+2;i++)
scanf("%d",&t[i]);
for(i=0;i<=n+2;i++)
for(j=0;j<=(n+2)-i-1;j++)
if(t[j]>t[j+1])
{
temp=t[j];
t[j]=t[j+1];
t[j+1]=temp
}
for(i=0;i<=n+2;i++)
if(t[i]==h);
j=i;break;

p=0;
while(t[j]!=tot-1)
{
atr[p]=t[j];
j++;
p++;
}
atr[p]=t[j];
p++;
i=0;
while(p!=(n+3) && t[i]!=t[h])
{
atr[p]=t[i]; i++;
p++;
}

Page 67
 for(j=0;j<n+2;j++)
{
if(atr[j]>atr[j+1])
d[j]=atr[j]-atr[j+1];
else
d[j]=atr[j+1]-atr[j];
sum+=d[j];
}
printf("total header movements%d",sum);
printf("avg is %f",(float)sum/n);
getch();
}

Page 68
INPUT
Enter the track position : 55 58 60 70 18 90 150 160 184
Enter starting position : 100

OUTPUT

Tracks traversed Difference Between tracks

150 50
160 10
184 24
18 240
55 37
58 3
60 2
70 10
90 20
Average seek time : 35.7777779

Page 69