Professional Documents
Culture Documents
Pro100 Shortcuts
Pro100 Shortcuts
com
Basic keyboard shortcuts and working with the mouse in the PRO100 program
at least for version 6.15
There must be keys when marking Shift, Ctrl, Alt or their combinations pressed before clicking the mouse on the selected element!
Each click causes a tag from the previously selected element to the
Alto + Marks an element covered by another element
element below or behind it.
SHIFT
Adds or removes an element or locked subgroup within a group for
++ Adds (removes) an element label within a group labeling without marking the highest group.
Ctrl
SHIFT
Each click adds or removes the following elements, which are obscured by those
++ Adds (removes) the label of the covered element
previously selected. The selected elements remain selected.
Alto
Ctrl
Each click causes a tag from the previously selected element to an element
++ Marks hidden elements within a group
that is obscured within the group without marking the highest group.
Alto
The ALT key while dragging an element by dragging the mouse causes red
snap surfaces to appear on the edges of the surrounding objects to which
+ Alt Snapping surfaces the selected element automatically snaps. The same applies to resizing by
dragging the grip points.
ALIGNMENT, MOVEMENT AND ADJUSTMENT OF DIMENSIONS
Alto
+ + Snapping areas within groups ALT + Ctrl activates snapping to elements that are inside the group.
Ctrl
Alto
+ + Snapping areas to the center of the object Alt + C key activates the snapshots to the centered elements.
C
While moving or resizing the object, you need to press the Shift key and
continue moving / adjusting the object. Elements in a collision will be
+ SHIFT Cancel collision detection
colored red - a warning when a collision is detected. To turn off
detection, just uncheck.
The selected element can be moved using the arrows on the keyboard. One press of
SHIFT + Moving objects the arrow causes a displacement of 1 mm in the respective direction (according to
the orientation of the gripping points). With 10mm SHIFT key.
After selecting an object without releasing the left mouse button, you
+ + Duplicate an element need to right-click and then drag to move the duplicate to a new
location.
When projecting in perspective, you can change the projection angle (focal length)
SHIFT + Changing the perspective angle (zoom) by dragging the mouse: a combination of the Shift key and the right mouse
VIEW ADJUSTMENT
button.
In case the mouse cursor cannot be placed on an empty area of the scene (eg
Alto + Rotate the scene without grabbing the element at high zoom), the same functionality can be obtained by pressing the Alt key
and clicking and dragging the right mouse button.
The virtual room can be rotated using the left and right arrow keys. Use
Rotate and zoom the view the up and down arrows to zoom in and out on the scene. Caution - no
element in the project must be marked!
www.pro100.cz l www.pro100.sk
While dragging material from the MATERIAL LIBRARY to an element
along with the SHIFT key, the materials are swapped. All identical
+ SHIFT Mass exchange of material materials will be replaced. E.g. replacement of materials for all doors. No
CHANGE OF MATERIAL
While dragging material from the LIBRARY to an element, the element can be
+ Multiple material change colored by right-clicking. In this way, more elements can be colored gradually
without releasing the left mouse button.
Clicking on the eyedropper and holding down the left mouse button on the element for
Dropper
about 0.5 seconds will cause the material to be copied. By dragging the mouse while
++ Mass transfer of material between elements
holding down the left button and the SHIFT key, we move the cursor to another element and
SHIFT release the left button. Without SHIFT - we transfer the material to one element.
Activates a new dimension, then after hovering the mouse over the edge of the object we
Ctrl + Ins New dimension want to dimension. The program displays red-colored snap lines to which the dimensions are
QUOTATION
bound.
Pressing the Ctrl key while retrieving a new dimension binds the
+ Ctrl Bind dimensions to element edges within groups dimension to elements (nested groups) that are part of the parent
group. Analogous to the marking of elements within a group.
Pressing C while drawing a new dimension causes the dimension to be bound to the
+C Binding dimensions to the center of an element center of the feature. Can be combined with the Ctrl key to bind to the center of nested
elements.
Press the Ctrl key to turn on straight guides. The rectilinear guide lines of the
+ Ctrl
SHAPE EDITOR
Linear guide lines node associated with the dragged node are generated based on the position of
the node relative to the grid and relative neighbors.
Pressing Alt turns on the mode of circular guide lines, which are connected only with
+ Alto Circular guide lines neighboring nodes. These are circles with the center at the adjacent node and the
radius of the distance between the dragged and the adjacent node.
You must hold down the Ctrl key before selecting an element in the Library and
REPLACEMENT OF ELEMENTS
Ctrl You must hold down the Ctrl and SHIFT keys before selecting the object and
++ Mass exchange of elements dragging it into the project. All elements with the same ID will be replaced in
SHIFT bulk.
SHIFT + F5 Paste from Library Ctrl + AND Select all objects in the project Save
Ctrl + F5 Add selected element to Library Ctrl + WITHthe project
KEYBOARD SHORTCUTS FOR RUNNING COMMANDS
Ctrl + ( Rotate the selected element 90 ° to the left Ctrl + N New project
Ctrl + ) Rotate the selected element 90 ° to the right Ctrl + Break The Ctrl key breaks locked groups
Del Delete the selected element SHIFT Center view. The command is also
Ins Insert a new "board" object New ++ C available on the toolbar below the
Ctrl target icon.
Ins line in the price list
www.pro100.cz l www.pro100.sk