Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    User Manual USR TCP232 302 Quick Start Guide 20

    Uploaded by

    Victor Cruz
    This document provides instructions for installing and configuring a USR-TCP232-302 serial-to-Ethernet converter. It outlines connecting the hardware, downloading software from the provided links, assigning a static IP address, and accessing the device's web interface using the default IP to configure serial port, network, and target device parameters. Key steps include connecting the device to an Ethernet network or PC, installing virtual COM port software, and configuring the serial port, IP addresses, baud rate and other settings through the web interface.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    User Manual USR TCP232 302 Quick Start Guide 20

    Uploaded by

    Victor Cruz
    46 views1 page
    This document provides instructions for installing and configuring a USR-TCP232-302 serial-to-Ethernet converter. It outlines connecting the hardware, downloading software from the provided links, assigning a static IP address, and accessing the device's web interface using the default IP to configure serial port, network, and target device parameters. Key steps include connecting the device to an Ethernet network or PC, installing virtual COM port software, and configuring the serial port, IP addresses, baud rate and other settings through the web interface.

    Original Description:

    Hdbd

    Original Title

    User-Manual-USR-TCP232-302-Quick-Start-Guide-20

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for installing and configuring a USR-TCP232-302 serial-to-Ethernet converter. It outlines connecting the hardware, downloading software from the provided links, assigning a static IP address, and accessing the device's web interface using the default IP to configure serial port, network, and target device parameters. Key steps include connecting the device to an Ethernet network or PC, installing virtual COM port software, and configuring the serial port, IP addresses, baud rate and other settings through the web interface.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    46 views1 page

    User Manual USR TCP232 302 Quick Start Guide 20

    Uploaded by

    Victor Cruz
    This document provides instructions for installing and configuring a USR-TCP232-302 serial-to-Ethernet converter. It outlines connecting the hardware, downloading software from the provided links, assigning a static IP address, and accessing the device's web interface using the default IP to configure serial port, network, and target device parameters. Key steps include connecting the device to an Ethernet network or PC, installing virtual COM port software, and configuring the serial port, IP addresses, baud rate and other settings through the web interface.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    2.Serial Port 3.

    Software Installation
    RS-232 DB9 Female Port  Download Setup/Test program from
     Install Virtual COM software- VCOM
    Quick Start Guide http://www.usriot.com/p/rs232-to-ethernet-converters/
    https://www.pusr.com/products/1-port-rs232-to-ethernet-converters
    -usr-tcp232-302.html
    Note: Be sure you have administrative rights and disable
    Serial RS232 to Ethernet Converter
    MODEL USR-TCP232-302 any firewalls/anti-virus software when install software.

    4. Configure USR-TCP232-302
    ■ Assign a static IP address to your computer in the
    192.168.0.2 to 192.168.0.254 range. Mask 255.255.255.0.
    This is necessary to ensure that your computer can
    communicate with your USR-TCP232-302.
    ■ The default IP address is 192.168.0.7 Open your web
    browser and enter this IP to connect with 302 for configure

    Default Parameters
    1. Hardware Installation User Name admin
    Pin Number 2 3 5 1,4,6,7,8 Password admin
     Use a standard Ethernet cable to connect the USR-
    TCP232-302 to an Ethernet router or connect it directly IP address 192.168.0.7

    to a PC. Mask 255.255.255.0


    Gateway 192.168.0.1
     RS-232 port can connect with a PC or other serial port
    Work Mode TCP Client
    device by serial cables DB9 Female
    TXD RXD GND NC Local Port 20108
    definition
    Baud Rate 115200
    Target Port 8234
    Target IP 192.168.0.201
    Parity bit/Data bit/Stop bit None/8/1

    ww.usriot.com sales@usriot.com

    You might also like