Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    B3LT1018

    Uploaded by

    Erna
    The B3LT1018 is a 30kW solid state S-band limiter measuring 122 x 105 x 55.4 mm used to protect marine radar systems from magnetron-generated spurious signals. It has a frequency range of 3.02 to 3.08 GHz, maximum insertion loss of 1 dB, and can provide up to 20 dB of attenuation controlled by a triggered STC generator circuit. The limiter is rated for operating temperatures from -40 to +90 degrees Celsius.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    B3LT1018

    Uploaded by

    Erna
    18 views1 page
    The B3LT1018 is a 30kW solid state S-band limiter measuring 122 x 105 x 55.4 mm used to protect marine radar systems from magnetron-generated spurious signals. It has a frequency range of 3.02 to 3.08 GHz, maximum insertion loss of 1 dB, and can provide up to 20 dB of attenuation controlled by a triggered STC generator circuit. The limiter is rated for operating temperatures from -40 to +90 degrees Celsius.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The B3LT1018 is a 30kW solid state S-band limiter measuring 122 x 105 x 55.4 mm used to protect marine radar systems from magnetron-generated spurious signals. It has a frequency range of 3.02 to 3.08 GHz, maximum insertion loss of 1 dB, and can provide up to 20 dB of attenuation controlled by a triggered STC generator circuit. The limiter is rated for operating temperatures from -40 to +90 degrees Celsius.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views1 page

    B3LT1018

    Uploaded by

    Erna
    The B3LT1018 is a 30kW solid state S-band limiter measuring 122 x 105 x 55.4 mm used to protect marine radar systems from magnetron-generated spurious signals. It has a frequency range of 3.02 to 3.08 GHz, maximum insertion loss of 1 dB, and can provide up to 20 dB of attenuation controlled by a triggered STC generator circuit. The limiter is rated for operating temperatures from -40 to +90 degrees Celsius.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    B3LT1018

    S-Band Limiter

    DESCRIPTION GENERAL
    The B3LT1018 is a 30kW solid state S-band high Outline……………………………………………..B3LT1018_SHT3
    power limiter with an integral filter for protection Overall dimensions.............. 122 x 105 x 55.4 mm nom
    against magnetron-generated spurious signals in Waveguide size .................................... WG10 (WR284)
    marine radar systems. A triggered STC generator Connectors:
    circuit is provided. waveguide ..................................................... special
    STC circuit.................................. Lumburg 2.5MBC 3
    CHARACTERISTICS (at 20°C ambient) Pin 1……………………………………………………………Supply
    see notes 1 and 6 Pin2……………………………………………………………Trigger
    Pin3………………………………………………………………Earth
    Frequency………………………………… 3.02 to 3.08 GHz
    Return loss……………………………….. 18 dB min Mounting position................................................... any
    Insertion loss……………………………. 1 dB max Net weight ................................................. 1 kg approx.
    Total peak leakage (PO 30 kW)…. 100 mW max
    Recovery to -3 dB (PO 10 kW)…… 1 µs max NOTES
    STC maximum (see note 2)………. 20 dB
    1. High power tests measured at 3.05 GHz, tp 0.1, du
    STC response: 0.001, STC tests measured at 3.05 GHz, VS +12 V, VP
    at 3.0µs (see note 3)………………… 10 ± 1.5 dB +3.5 V, tP 2 µs.
    at 11µs 1.5 dB max 2. Attenuation level that the maximum attenuation from the
    Clutter saturation (see note 4) 5 dB max STC generator circuit can be set to by variable resistor
    STC bias voltage (see note 5) 4.25 V min RV1.
    3. Measured from the start of the STC ramp with maximum
    MAXIMUM AND MINIMUM RATINGS attenuation of 20 dB.
    4. Change in the maximum attenuation of the STC curve
    MIN MAX due to 10 mW of incident power.

    Transmitter power: 5. Voltage at the cathode of D1A when the attenuation is


    20 dB. Design parameter only.
    peak .............................................. - 30 kW
    mean ............................................. - 30 W 6. Maximum and minimum characteristic values may be
    exceeded at the temperature extremes. Contact e2v for
    Pulse duration .................................... - 2.0 µs details.
    Duty ratio ........................................... - 0.001
    7. The components on the STC generator circuit are
    STC circuit supply .......................... 11.5 12.5 V exposed and are static sensitive. Correct procedures for
    STC trigger pulse…………………………… 3.5 5.5 V handling of such components are to be adhered to.
    Ambient temperature: 8. The STC circuit cable must be clamped on installation to
    operating ................................. −40 +90 °C minimise damage resulting from excessive flexing. The
    storage ..................................... −50 +90 °C limiter must be mounted so that the EMC effects are
    contained.

    Whilst e2v technologies has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the consequences of any use
    thereof and also reserves the right to change the specification of goods without notice. e2v technologies accepts no liability beyond the set out in its standard
    conditions of sale in respect of infringement of third party patents arising from the use of tubes or other devices in accordance with information contained herein.
    e2v technologies (uk) limited, Waterhouse Lane, Chelmsford, Essex CM1 2QU United Kingdom Holding Company: e2v technologies plc
    Telephone: +44 (0)1245 493493 Facsimile: +44 (0)1245 492492
    Contact e2v by e-mail: enquiries@e2v.com or visit www.e2v.com for global sales and operations centres.
    © e2v technologies (uk) limited 2016 M210286A Version 3, June 2016
    Template: DF764388A-11 123197

    You might also like