Sound Attenuator

SOUND
ATTENUATOR
Model: AGI-SA-GI
Type: Square and Rectangular
Construction: Galvanized Steel (GI)
AGI Sound Attenuator’s were developed to various requirements

from the consulting engineers, owners & contractors.
They provide the most economical choice for solving the wide
range of noise control issues encountered in the HVAC field.
The AGI range of rectangular attenuators provides optimized acoustic
performance for application where high level of noise reduction
are required. These attenuators are suitable for most
applications incorporating sound attenuation and air flow.
Standard Construction
Casing: 1.0 mm thick galvanized steel sheet.
Splitters: 0.7 mm thick, Ø3 mm hole perforated galvanized steel
sheet.
Insulation:48 kg/m³ Density rockwool covered with black glass
tissue.
Flanges:20 mm Duct mate flanges on both ends.
Optional Construction
Casing:Thickness up to 2 mm
Splitters:1.0 mm thick, Ø5 mm hole perforated galvanized steel sheet.
Casing and Splitter Material:Stainless Steel
Insulation:48 kg/m³ Density fiberglass wool covered with black glass tissue
Features
•Minimum pressure drop and maximum insertion loss.
•Large radius inlets & tapered tails to minimize system effects.
•Available in any cross-sectional size eliminating the need for transitions.
•Fabricated in components to make the overall silencer bank size for easy handling & installation.
• Comes standard with flanges.
•Used in applications ranging from low velocity duct system to high velocity duct system.
1
SOUND
ATTENUATOR
Maintenance Instruction
Duct Silencers Installed Indoors

Duct silencers installed inside buildings are designed
to be essentially maintenance-free for the life of the
product. The same methods and routines used for
periodic cleaning of the ductwork will also apply to
the duct silencers. The acoustic media used in duct
silencers is protected by the perforated metal liner
so it will not erode during normal duct cleaning with
vacuum equipment.
Silencers Exposed to Corrosive Elements

Silencers specified for installation in locations where the outer casings will be exposed to high temperature or
corrosive elements are typically constructed with corrosive-resistant materials or finished with corrosion-
resistive coatings. Similarly, silencers that must convey high-temperature or corrosive gases will be
constructed internally with non-corrosive materials. Maintenance for these applications should be
discussed with our engineers prior to manufacture, as this will be a function of the materials used and the
corrosive elements which is specific to each individual application.
Duct Silencers Installed Outdoors

Duct silencers installed outdoors should be inspected at a
minimum of every 6 months. Inspect the condition of the
joints and replace loose or damaged sealant. Inspect the
welds and casings for signs of rusting. Remove visible rust
using a wire brush and re-coat with zinc-rich spray paint.
Silencers Exposed to High Humidity

Silencers exposed to high humidity levels, such as those installed on cooling tower discharge fans, should be
inspected frequently for signs of rusting. Remove visible rust using a wire brush and re-coat with zinc-rich
spray paint. As a general rule, the lifetime of a silencer exposed to high humidity will be less than one
installed in a dry indoor location.
2
SOUND
ATTENUATOR
Performance Data
Insertion Loss (Db)
Air Way Length
63 125 250 500 1k 2k 4k
Width (mm) (mm)
75 600 5 9 16 24 33 30 22
75 900 7 11 22 33 44 44 29
75 1200 8 14 28 40 50 50 36
75 l500 9 17 34 48 50 50 43
75 1800 10 19 40 50 50 50 49
75 2100 11 22 45 50 50 50 50
75 2400 12 24 49 50 50 50 50
100 600 6 9 14 19 32 31 23
100 900 3 12 18 25 42 41 29
100 1200 9 14 22 31 50 50 35
100 l500 10 17 27 38 50 50 41
100 1800 11 20 32 44 50 50 46
100 2100 13 23 36 50 50 50 50
100 2400 14 25 42 50 50 50 50
150 600 8 11 17 25 29 25 19
150 900 9 13 21 29 34 30 23
150 1200 11 16 25 36 39 34 28
150 l500 12 19 29 44 45 38 32
150 1800 13 22 32 49 50 45 36
150 2100 15 24 36 50 50 50 41
150 2400 18 26 39 50 50 50 45
175 600 5 7 10 13 23 17 16
175 900 6 9 13 17 29 22 18
175 1200 7 11 16 22 36 27 20
175 l500 8 13 19 26 42 32 22
175 1800 9 16 22 31 49 37 24
175 2100 10 18 25 35 50 42 26
175 2400 11 20 29 42 50 47 28
200 600 6 8 14 18 19 16 15
200 900 7 10 17 24 25 20 17
200 1200 8 12 21 30 32 25 19
200 l500 9 15 24 36 38 29 21
200 1800 10 17 29 42 45 35 24
200 2100 11 19 32 48 50 38 25
200 2400 11 21 36 50 50 43 27
3
SOUND
ATTENUATOR
Performance Data
Volume Flow Rates
FACE VELOCITY (m/s) 1.78 2.54 3.81 5.08 6.35 7.62 8.89 10.16
WIDTH HEIGHT FACE
(mm) (mm) AREA AIRFLOW (m3/s)
(m2)
300 300 0.090 0.160 0.229 0.343 0.457 0.572 0.686 0.800 0.914
600 300 0.180 0.320 0.457 0.686 0.914 1.143 1.372 1.6 1 .829
600 450 0.270 0.480 0.686 1.029 1.372 1.715 2.057 2.400 2.743
600 550 0.330 0.587 0.838 1.257 1.676 2.096 2.5 15 2.934 3.353
600 600 0.360 0.640 0.914 1.372 1.829 2.286 2.743 3.200 3.658
900 300 0.270 0.480 0.686 1.029 1.372 1.715 2.057 2.400 2.743
900 450 0.405 0.720 1.029 1.543 2.057 2.572 3.086 3.600 4.11 5
900 500 0.450 0.800 1.143 1.715 2.286 2.858 3.429 4.001 4.572
900 600 0.540 0.960 1.372 2.057 2.743 3.429 4.115 4.801 5.486
900 700 0.630 1.120 1.600 2.400 3.200 4.001 4.801 5.601 6.401
900 800 0.720 1.280 1.829 2.743 3.658 4.572 5.486 6.401 7.315
900 900 0.810 1 .440 2.057 3.086 4.115 5.144 6.172 7.201 8.230
1200 300 0.360 0.640 0.914 1.372 1.829 2.286 2.743 3.200 3.658
1200 450 0.540 0.960 1.372 2.057 2.743 3.429 4.115 4.801 5.486
1200 600 0.720 1.280 1.829 2.743 3.658 4.572 5.486 6.401 7.315
1200 750 0.900 1.600 2.286 3.429 4.572 5.715 6.858 8.001 9.144
1200 900 1.080 1.920 2.743 4.115 5.486 6.858 8.230 9.601 10.973
1200 1050 1.260 2.240 3.200 4.801 6.401 8.001 9.601 11.201 12.802
1200 1200 1.440 2.560 3.658 5.486 7.315 9.144 10.973 12.802 14.630
1500 450 0.675 1.200 1.715 2.572 3.429 4.286 5.144 6.001 6.858
1500 600 0.900 1.600 2.286 3.429 4.572 5.715 6.858 8.001 9.144
1500 750 1.125 2.000 2.858 4.286 5.715 7.144 8.573 10.001 11.430
1500 900 1.350 2.400 3.429 5.144 6.858 8.573 10.287 12.002 13.716
1500 1050 1.575 2.800 4.001 6.001 8.001 10.001 12.002 14.002 16.002
1500 1200 1.800 3.200 4.572 6.858 9.144 11.430 13.716 16.002 18.288
1500 1350 2.025 3.600 5.144 7.715 10.287 12.859 15.431 18.002 20.574
1500 1500 2.250 4.001 5.715 8.573 11.430 14.288 17.145 20.003 22.860

Sound Attenuator

Uploaded by

Copyright:

Available Formats

Sound Attenuator

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sound Attenuator

Uploaded by

Copyright:

Available Formats

SOUND

AGI Sound Attenuator’s were developed to various requirements

Duct Silencers Installed Indoors

Silencers Exposed to Corrosive Elements

Duct Silencers Installed Outdoors

Silencers Exposed to High Humidity

You might also like