100W Single Output Switching Power Supply S-100 series

Features :
AC input range selectable by switch
Protections:Short circuit/Over load
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 25KHz
Low cost
High reliability
1 year warranty

SPECIFICATION
MODEL S-100-3 S-100-5 S-100-7.5 S-100-10 S-100-12 S-100-15 S-100-18 S-100-24 S-100-27 S-100-48
DC VOLTAGE 3V 5V 7.5V 10V 12V 15V 18V 24V 27V 48V
RATED CURRENT 20A 20A 13.6A 10A 8.5A 6.7A 5.6A 4.5A 3.7A 2A
CURRENT RANGE 0 ~ 20A 0 ~ 20A 0 ~ 13.6A 0 ~ 10A 0 ~ 8.5A 0 ~ 6.7A 0 ~ 5.6A 0 ~ 4.5A 0 ~ 3.7A 0 ~ 2A
RATED POWER 60W 100W 102W 100W 102W 100.5W 100.8W 108W 99.9W 96W
RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p
OUTPUT
VOLTAGE ADJ. RANGE 2.85 ~ 3.3V 4.75 ~ 5.5V 6.75 ~ 8.25V 9 ~ 11V 10.8 ~ 13.2V 13.5 ~ 16.5V 16.2 ~ 19.8V 21.6 ~ 26.4V 26 ~ 32V 43.2 ~ 52.8V
VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
LINE REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2%
LOAD REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2%
SETUP, RISE, HOLD TIME 200ms, 80ms, 20ms at full load
VOLTAGE RANGE 85 ~ 132VAC/180 ~ 264VAC selected by switch 255 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 70% 78% 80% 80% 81% 81% 82% 84% 84% 84%
INPUT
AC CURRENT 2.4A/115VAC 1.2A/230VAC
INRUSH CURRENT (max.) COLD START 30A/115VAC 60A/230VAC
LEAKAGE CURRENT <1mA / 240VAC
105 ~ 150% rated output power (150 ~ 200% rated output power for S-100-7.5 only)
PROTECTION OVER LOAD
Protection type : Shut down o/p voltage, re-power on to recover
WORKING TEMP. -10 ~ +60 (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT 0.03%/ (0 ~ 50
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS Design refer to UL1012
SAFETY & WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Design refer to FCC Part15 J Conduction Class B
MTBF 322.4K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION 199*98*38mm (L*W*H)
PACKING 0.62Kg; 20pcs/13.6Kg/0.72CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
NOTE
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.

File Name:S-100-SPEC 2004-06-30

 100W Single Output Switching Power Supply S-100 series

Mechanical Specification Case No. 902 Unit:mm

197

7
9
12

3.5
1

2
9.5

85.5
98
80

5
8.2

7
3
M
3.5 4-

4.5 57.5 120

199

6.5 190

9.5
9

18

3.5
3-M
18
3.5

38
3

28.5
22 157

Terminal Pin. No Assignment

Pin No. Assignment Pin No. Assignment
1 AC/L 4,5 DC OUTPUT -V
2 AC/N 6,7 DC OUTPUT +V
3 FG

Derating Curve Static Characteristics (24V)

Ta=25
32 350
100 S-100-12~48
OUTPUT RIPPLE (mVp-p)

28 300
OUTPUT VOLTAGE (V)

80 S-100-5 24 250

60 S-100-6.5,7.5 20 200
LOAD (%)

16 150
40
12 100
20
8 50

-10 0 10 20 30 40 50 60 (VERTICAL) 80 85 90 95 100 105 110 115 120 125 130

-10 0 45 55 (HORIZONTAL) 160 170 180 190 200 210 220 230 240 250 260

AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz

File Name:S-100-SPEC 2004-06-30