I. Aligning The Resources With The Strategic Plan (37%)
I. Aligning The Resources With The Strategic Plan (37%)
4. Quality System-Understand how the quality tools and processes are used to implement the strategic choices. 5. Information system Understand how information system influence and support operation strategy. Referances:1, 2, 4(chapter 1-4)
II Configuring and integrating the operating processes to support the strategic plan (32%):
The element that constitute the P&IM system must work in an integrated manner if the system is to operate affectively .The candidate should understand the interrelationship between these element and be able to analyse and configure P&IM systems for specific strategic and operational situation A. configuring and integrating the strategic planning processes: This session focuses on aligning the operations and control processes with the characteristics of the product and process choices that support the business objectives It examines how to analyse and configure operations and control system for specific strategic and operational situations. This section also addresses aligning operating processes with selected strategies to support the strategic business objectives. The section examines the fit of approaches and methods to specific strategic and operational situations and alignment and integration with those strategies. 1. Operations control system Understand the relationships between operational control processes and the other business choices. 2. Operations control system configuration-Understand the characteristics of the operation planning and control processes that are consistent with each position on the volume and variety matrix 3. Supporting dimensions of competitive advantageUnderstand how the characteristics of the operations planning and control processes support each dimension of competitive advantage. 4. Supporting combination for competitive advantageUnderstand how processes can be combined of volume and variety position and dimensions of strategic advantage. B. Supply Chain Management: This section focuses on the linkage between the strategic plan and the strategic plan and the structure of the organizations supply chain .This chain links suppliers ,the company and customer as the material is transformed . The degree to which these component are linked and the alignment of the linkages are critical to efficient operation of the business. This section also addresses the fit of methods to specific strategies and operational situations as well as the alignment and
integration with the other supply chain management processes. 1.Supply chain management and scope Define the supply chain management ,the value chain model ,and the history of supply chain management. 2.Global souring and distribution-Understand global souring and distribution and other international issues of managing the supply chain. 3. Time based competition Understand how time-based competition and cycle time reduction improve customer response time and provide competitive advantage. 4.Supply chain management with supplier Explain the strategic relationship ,communication ,and inventory management among alliance members of the supply chain. 5.Technology and the supply chain Recognize how the choices and development of information technology affect the supply chain. C. Configuring and Integrating design and Development and cost Management Processes: This section focuses on two sets of processes that are typically out side of the scope of the operation ,but influence the effectiveness of operations. The candidate must understand the scope of the processes and the demands placed on them .Design and development employs a set of processes that extends from the initial investigation of a concept through the selection of concepts to implement and support the resulting products and processes through there life spans .Cost management processes support external reporting of financial results ,asset valuation ,operational control ,and product costing. These processes capture, organize, and retain data used in making decisions that influence current operations and the future competitive position of the organization. 1. Design and development processes recognize tools that can be employed to improve these processes ,understand how the processes can provide competitive advantage ,and understand the management of product and process charges . 2. Cost management processes-Understand cost composition and its relationships with technology and process choice ,cost accounting methods and their application ,assest valuation methods and their application ,and methods for financial settlement with customer and supplier. References: 1, 2, 4(chapters 2, 7, 8, 19) III.Implementing Change (31%) The Candidate should be able to recogniza ,understand and apply the methods used to implement change of various operational control systems. These systems of change are required to enable people to either continuously improve or revolutionize the processes in which they are involved .By properly monitoring and measuring operations and taking
appropriate action,an organization can achive its goals and objectives in important areas such as cost ,quality ,and cycle time A. Project Management: This section focuses on the concepts ,approaches , and methods for defining , selecting ,and managing projects.It addresses the process of defining the current situation and the proposal for the target situation ,justifying the proposal ,and planning and controlling the project .It also addresses the approaches and techniques for evaluating proposed projects and selecting them for implementation. 1. The capital budgeting process- Understand the various methods of determining a project value and justifying the adoption of a project. 2. The Project planning process- Understand the various items that make up a project plan ,including a statement of work ,work breakdown structure ,project schedule ,responsibility matrix , resources requirements, and budget. 3. The project implementation phase-Understand that this phase includes the selection of a project manager ,the scheduling of the work ,team dynamics, and managing the schedule and budget. 4. The closeout phase-Understand that this phase includes documentation of the project ,a post implementation audit ,customer approval ,closing the operation ,and the final report. B.Measuring Organizational performance: This section focuses on the various methods of developing ,deploying, and evaluating measurement processes that are central to effective management and leadership of the organization .It addresses concepts that are fundamental to the effective use of measurement strategies and techniques of organizational performance, as well as the selection of measurements that are appropriate in the alignment of specific strategic and operational situations to the expected results. 1. Fundamental concepts of measurement Identify why we measure what we measure . 2. Organizational measurements-Understand appropriate measurements of the various functional areas such as manufacturing , financial ,engineering ,sales ,marketing ,and overall organizational performance. 3. Strategic implication of measurement Understand that what we are measuring aligns with what we should measure and performance of the organization matches the interpretation of the various performance measurements. C.Change management This section addresses the elements of successful organizational change and sound methodologies to gain management and employee commitment. The scope of change management begins at the point where the areas for change have been identified and extends through the institutionalisation of the change.
1. Organizational change concepts-Recognize why organizations change, the phase of organizational change, and individual and group responses to change. 2. Change process- Understand the steps in successful organizational change and tools that can assist the organization in executing each step. 3. How to lead change-Recognize the differences between management and leadership and the roles of leaders in implementing organizational change. 4. Prepaaring employees for change-Recognize the tool that can help prepare employees for change and the ways to gain commitment to change efforts. References: 1, 2, 4 (chapter10)
Key Terminology
Acceptance sampling --- 1) The process of sampling a portion of goods for inspection rather than examining the entire lot. The entire lot may be accepted or rejected based on the sample even though the specific units in the lot are better or worse than the sample. There are two types: attributes sampling and variables sampling. In attributes sampling, the presence or absence of a characteristic is noted in each of the units inspected. In variables sampling, the numerical magnitude of a characteristic is measured and recorded for each inspected unit; this type of sampling involves reference to a continuous scale of some kind. 2) A method of measuring random samples of lots or batches of products against predetermined standards. Activity based costing (ABC) --- A cost accounting system that accumulates costs based on activities performed and then uses cost drivers to allocate these costs to products or other bases, such as customers, markets, or projects. It is an attempt to allocate overhead costs on a more realistic basis than direct labour or machine hours. Syn: activity based cost accounting. Activity based management (ABM) --- The use of activity based costing information about cost pools and drivers, activity analysis, and business processes to identify business strategies; improve product design, manufacturing, and distribution; and remove waste from operations. Automated storage/retrieval system (AS/RS) --- A high density rack inventory storage system with vehicles automatically loading and unloading the racks. Backward integration --- The process of buying or owning elements of the production cycle and channel of distribution back toward raw material suppliers. Bar coding --- A method of encoding data using bar code for fast and accurate reliability. Baseline measures --- A set of measurements (or metrics) that seeks to establish the current or starting level of performance of a process, function, product, firm, etc.
Baseline measures are usually established before implementing improvement activities and programs. Benchmarking --- The continuous process of measuring the companys products, services, costs, and practices against those of competitors or firms that that display the best in class achievements. Benchmark measures --- A set of measurements (or metrics) that is used to establish goals for improvements in processes, functions, products, etc. Benchmark measures are often derived from other firms that display best in class achievement. Business process reengineering (BPR) --- A procedure that involves the fundamental rethinking and radical redesign of business processes to achieve dramatic organizational improvements in such critical measures of performance as cost, quality, and speed. Any BPR activity is distinguished by its emphasis on 1) process rather than functions and products and 2) the customers for the process. Capacity Strategy--- One of the strategic choices that a firm must make as part of its manufacturing strategy. There are three commonly recognized capacity strategies; lead, lag, and tracking. A lead capacity strategy adds capacity in anticipation of increasing demand. A lag strategy does not add capacity until the firm is operating at or beyond full capacity. A tracking strategy adds capacity in small amounts to attempt to respond to changing demand in the marketplace. Cellular manufacturing --- A manufacturing process that produces families of parts within a single line or cell of machines controlled by operators who work only within the line or cell Competitive advantage --- An edge, e.g., a process, patent, management philosophy, or distribution system, that a seller has that enables the seller to control a larger market share or profit than the seller would otherwise have. Syn: Competitive edge Computer aided design (CAD) --- The use of computers in interactive engineering drawing and storage of designs. Programs complete the layout, geometric transformations, projections, rotations, magnifications, and interval (cross-section) views of a part and its relationship with other parts. Computer aided engineering (CAE) --- The process of generating and testing engineering specifications on a computer workstation. Computer aided manufacturing (CAM) --- The use of computers to program, direct, and control production equipment in the fabrication of manufactured items. Computer assisted software engineering (CASE) --- The use of computerized tools to assist in the process of designing, developing, and maintaining software products and systems. Computer integrated manufacturing (CIM) --- The integration of the total manufacturing organization through the use of computer systems and managerial philosophies that improve the organizations effectiveness; the application of a
computer to bridge various computerized systems and connect them into a coherent, integrated whole. For example, budgets, CAD/CAM, process controls, group technology systems, MRP II, financial reporting systems, etc. are linked and interfaced. Control chart --- A graphic comparison of process performance data with predetermined computed control limits. The process performance data usually consist of groups of measurements selected in regular sequence of production that preserve the order. The primary use of control charts is to detect assignable causes of variation in the process as opposed to random variations. The control chart is one of the seven tools of quality. Syn: process control chart Corporate culture --- The set of important assumptions that members of the company share. It is a system of shared values about what is important and beliefs about how the company works. These common assumptions influence the ways the company operates. Critical path method (CPM) --- A network planning technique for the analysis of a projects completion time, used for planning and controlling the activities in a project. By showing each of these activities and their associated times, the critical path, which identifies those elements that actually constrain the total time for the project, can be determined. Database --- A data processing file management approach designed to establish the independence of computer programs from data files. Redundancy is minimized, and data elements can be added to, or deleted from, the file structure without necessitating changes to existing computer programs. Decision support systems (DSS) --- A computer system designed to assist managers in selecting and evaluating courses of action by providing a logical, usually quantitative, analysis of the relevant factors. Delivery lead time --- The time from the receipt of a customer order to the delivery of the product. Syn: delivery cycle Depreciation --- An allocation of the original value of an asset against current income to represent the declining value of the asset as a cost of that time period. Depreciation does not involve a cash payment. It acts as a tax shield and thereby reduces the tax payment. Design for manufacturability --- Simplification of parts, products, and processes to improve quality and reduce manufacturing costs. Discounted cash flow --- A method of investment analysis in which future cash flows are Distributed systems --- Computer systems in multiple locations throughout an organization, working in a cooperative fashion, with the system at each location primarily serving needs of that location but also able to receive and supply information from other systems within a network.
Electronic data interchange (EDI) --- The paperless (electronic) exchange of trading documents, such as purchase orders, shipment authorizations, advanced shipment notices, and invoices, using standardized document formats. Employee empowerment --- The practice of giving non- managerial employees the responsibility and the power to make decisions regarding their jobs or tasks. It is associated with the practice of transfer of managerial responsibility to the employee. Empowerment allows the employee to take on responsibility for tasks normally associated with staff specialists. Examples include allowing the employee to make scheduling, quality, process design, or purchasing decisions Employee involvement (EI) --- The concept of using the experience, creative energy, and intelligence of all employees by treating them with respect, keeping them informed, and including them and their ideas in decision-making processes appropriate to their areas of expertise. Employee Involvement focuses on quality and productivity improvements. Enterprise resource planning (ERP) --- 1) An accounting oriented information system for identifying and planning the enterprise wide resources needed to take, make, ship, and account for customer orders. An ERP system differs from the typical MRP II system in technical requirements such as graphical user interface, relational database, use of fourth generation language, and computer assisted software engineering tools in development, client/server architecture, and open system portability. 2) More generally, a method for the effective planning and control of all resources needed to take, make, ship, and account for customer orders in a manufacturing, distribution, or service company. Expert system --- A type of artificial intelligence computer system that mimics human experts by using rules and heuristics rather than deterministic algorithms. Fixed budget --- A budget of expected costs based on a specific level of production or other activity. Flexibility --- The ability of the manufacturing system to respond quickly, in terms of range and time, to external or internal changes. Six different categories of flexibility can be considered: mix flexibility, design changeover flexibility, modification flexibility, volume flexibility, rerouting flexibility, and material flexibility. In addition, flexibility involves concerns of product flexibility. Flexibility can be useful in coping with various types of uncertainty (regarding mix, volume, etc.). Flexible budget --- A budget showing the costs and revenues expected to be incurred or realized over a period of time at different levels of activity, measured in terms of some activity base such as direct labor hours, direct labor costs, or machine hours. A flexible manufacturing overhead budget gives the product costs of various manufacturing overhead items at different levels of activity. Flexible manufacturing system (FMS) --- A group of numerically controlled machine tools interconnected by a central control system. The various machining cells are interconnected via loading and unloading stations by an automated transport
system. Operational flexibility is enhanced by the ability to execute all manufacturing tasks on numerous product designs in small quantities and with faster delivery. Focused factory --- A plant established to focus the entire manufacturing system on a limited, concise, manageable set of products, technologies, volumes, and markets precisely defined by the companys competitive strategy, technology, and economics. Forward integration --- Process of buying or owning elements of the production cycle and the channel of distribution forward toward the final customer. Gantt chart --- The earliest and best-known type of planning and control chart, especially designed to show graphically the relationship between planned performance and actual performance over time. Named after its originator, Henry L. Gantt, the chart is used 1) for machine loading, in which one horizontal line is used to represent capacity and another to represent the load against that capacity; or 2) for monitoring job progress, in which one horizontal line represents the production schedule and another parallel line represents the actual progress of the job against the schedule in time. Syn: job progress chart, milestone chart Generally accepted accounting principles --- Accounting practises that conform to conventions, rules, and procedures that have general acceptability by the accounting profession. Global measures --- The set of measurements that refers to the overall performance of the firm. Net profit, return on investment, and cash flow are examples of financial measures; and throughput, operating expense, and inventory are examples of operational measures. Group technology (GT) --- An engineering and manufacturing philosophy that identifies the physical similarity of parts (common routing) and establishes their effective production. It provides for rapid retrieval of existing designs and facilitates a cellular layout. House of quality (HOQ) --- A structured process that relates customer-defined attributes to the products technical features needed to support and generate these attributes. This technique achieves this mapping by means of a six-step process: 1) identification of customer attributes; 2) identification of supporting technical features; 3) correlation of the customer attributes with the supporting technical features; 4) assignment of priorities to the customer requirements and technical features; 5) evaluation of competitive stances and competitive products; and 6) identification of those technical features to be used (deployed) in the final design of the product. HOQ is the part of the quality function deployment (QFD) process and forces designers to consider customer needs and the degree to which the proposed designs satisfy these needs. Hurdle rate --- The minimum acceptable rate of return on a project. Information system architecture --- A model of how the organization operates regarding information. The model considers four factors: 1) organizational functions 2) communication of coordination requirements, 3) data modelling needs, and 4)
management and control structures. The architecture of the information system should be aligned with and match the architecture of the organization. Internal rate of return --- The rate of compound interest at which the companys outstanding investment is repaid by proceeds from the project. ISO 9000 Series Standards --- A set of five individual but related international standards on quality management and quality assurance developed to help companies effectively document the quality system elements to be implemented to maintain an efficient quality system. The standards, initially published in 1987, are not specific to any particular industry, good, or service. The standards were developed by the International Standards Organization (ISO), a specialized international agency for standardization composed of the national standards bodies of 91 countries. ISO 14000 Series Standards --- A series of generic environmental management standards under development by the International Organization of Standardization, which provide structure and systems for managing environmental compliance with legislative and regulatory requirements and affect every aspect of a companys environmental operations. Job enrichment --- An increase in the number of tasks that an employee performs and an increase in the control over those tasks. It is associated with the design of jobs and especially the production workers job. Job enrichment is an extension of Job enlargement. Just-in-Time (JIT) --- A philosophy of manufacturing based on planned elimination of all waste and on continuous improvement of productivity. It encompasses the successful execution of all manufacturing activities required to produce a final product, from design engineering to delivery, and includes all stages all stages of conversion from raw material onward. The primary elements of JIT are to have only the required inventory when needed: to improve quality to zero defects: to reduce lead times by reducing setup times, queue lengths, and lot sizes: to incrementally revise the operations themselves: and to accomplish these activities at minimum cost. In the broad sense, it applies to all forms of manufacturing-job shop, process, and repetitiveand to many service industries as well. Syn: short-cycle manufacturing, stockless production, zero inventories. Knowledge based system --- A computer program that employs knowledge of the structure of relations and reasoning rules to solve problems by generating new knowledge from the relationships about the subject. Learning curve --- A curve reflecting the rate of improvement in time per piece as more units of an item are made. A planning technique, the learning curve is particularly useful in project oriented industries in which new products are frequently phased in. The basis for the learning curve calculation is that workers will be able to produce the product more quickly after they get used to making it. Syn: experience curve, manufacturing progress curve.
Life cycle costing --- The identification, evaluation, tracking, and accumulation of actual costs for each product from its initial research and development through final customer servicing and support in the marketplace. Local measures --- The set of measurements that relates to a resource, operation, process, or part and usually has low correlation to global organization measures. Examples are errors per printed page, departmental efficiency, and volume discounts. Manufacturing execution system (MES) --- A factory floor information and communication system with several functional capabilities. It includes functions such as resource allocation and status, operation/detailed scheduling, dispatching production units, document control, data collection and acquisition, labour management, quality management, process management, maintenance management, product tracking and genealogy, and performance analysis. It can provide feedback from the factory floor on a real time basis. It interfaces with and complements accounting oriented, resource planning system. Manufacturing strategy --- A collective pattern of decisions that acts upon the formulation and deployment of manufacturing resources. To be most effective, the manufacturing strategy should act in support of the overall strategic direction of the business and provide for competitive advantages (edges). Milestone schedule --- A schedule consisting of key events or milestones selected as a result of coordination between the clients and the contractors project management. The client may be external or internal to the company executing the project. The events or milestones are generally critical accomplishments planned at time intervals throughout the project and used as a basis to monitor overall project performance. This schedule may use a network format or a bar chart format, either of which may contain minimal detail at a highly summarized level. Net present value --- The present (discounted) value of future earnings (operating expenses have been deducted from net operation revenues) for a given number of time periods. Network planning --- A generic term for techniques that are used to plan complex projects. Two of the best known network planning techniques are the critical path method (CPM) and the program evaluation and review technique (PERT). Numerical control (NC) --- A means of operating a machine tool automatically by the use of coded numerical instructions. Order qualifiers --- Those competitive characteristics that a firm must exhibit to be a viable competitor in the market place. For example, a firm may seek to compete on characteristics other than price, but in order to qualify to compete, its costs and the related price must be within a certain range to be considered by its customers. Syn: qualifiers. Order winners --- Those competitive characteristics that cause a firms customers to choose that firms goods and services over those of its competitors. Order winners can be considered to be competitive advantages for the firm. Order winners usually focus
on one (rarely more than two) of the following strategic initiatives: price/cost, quality, delivery speed, delivery reliability, product design, flexibility, after-market service, and image. Participative design/engineering --- A concept that refers to the participation of all the functional areas of the firm in the product design activity. Suppliers and customers are often also included. The intent is to enhance the design with the inputs of all the key stakeholders. Such a process should ensure that the final design meets all the needs of the stakeholders and should ensure a product that can be quickly brought to the marketplace while maximizing quality and minimizing costs. Syn: co-design, concurrent design, concurrent engineering, parallel engineering, simultaneous design/engineering, team design/engineering. Simultaneous engineering. Participative management --- A system that encompasses various activities of high involvement in which subordinates share a significant degree of decision making power with their immediate superiors. Participative management draws on the rationale that everyone in an organization is capable of and willing to help guide and direct the organization toward agreed on goals and objectives. Payback --- A method of evaluating an investment opportunity that provides a measure of the time required to recover the initial amount invested in a project. Performance measure --- Purpose: to provide information necessary to create a competitive advantage. Provides information regarding the direction and rate of improvement over time and information regarding competitors. Pilot test --- 1) In computer system, a test before final acceptance of a new business system using a subset of data with engineered cases and documented results. 2) Generally, production of a quantity to verify manufacturability, customer acceptance, or other management requirements before implementation of ongoing production. Syn: pilot, walkthrough. Preventive maintenance --- The activities, including adjustments, replacements, and basic cleanliness, that forestall machine breakdowns. The purpose is to ensure that production quality is maintained and that delivery schedules are met. In addition, a machine that is well cared for will last longer and cause fewer problems. Process capability --- Refers to the ability of the process to produce parts that conform to (engineering) specifications. Process capability relates to the inherent variability of a process that is in a state of statistical control. Process control --- 1) The function of maintaining a process within a given range of capability by feedback, correction, etc. 2) The monitoring of instrumentation attached to equipment (valves, meters, mixers, liquid, temperature, time, etc) from a control room to ensure that a high quality product is being produced to specification. Process costing --- A cost accounting system in which the costs are collected by time period and averaged over all the units produced during the period. This system can be used with either actual or standard costs in the manufacture of a large number of identical units.
Process focused --- A type of manufacturing organization in which both plant and staff management responsibilities are delineated by production process. A highly centralized staff coordinates plant activities and intracompany material movements. This type of organization is best suited to companies whose dominant orientation is to a technology or a material and whose manufacturing processes tend to be complex and capital intensive. Product focused --- A type of manufacturing organization in which both plant and staff responsibilities are delineated by product, product line, or market segment. Management authority is highly decentralized, which tends to make the company more responsive to market needs and more flexible when introducing new products. This type of organization is best suited to companies whose dominant orientation is to a market or consumer group and where flexibility and innovation are more important than coordinated planning and tight control. Product life cycle --- 1) The stages a new product goes through from beginning to end, i.e., the stages that a product passes through from introduction thru growth, maturity, and decline. 2) The time from initial research and development to the time at which sales and support of the product to customers are withdrawn. 3) The period of time during which a product can be produced and marketed profitably. Product profiling --- 1) A graphical device used to ascertain the level of fit between a manufacturing process and the order winning criteria of its products. Product profiling can be used at the process or company level to compare the manufacturing capabilities with the market requirements to determine areas of mismatch and identify steps needed for realignment. 2) Removing material around a predetermined boundary by means of numerically controlled machining. The numerically controlled tool path is automatically generated on the system. Program evaluation review technique (PERT) --- A network planning technique for the analysis of a projects completion time. It uses an algorithm that permits identification of the critical path, the string of sequential activities that determines the projects completion time. PERT time estimates are probabilistic, based on pessimistic, most likely, and optimistic time estimates for each activity. Project costing --- An accounting method of assigning valuations that is generally used in industries where services are performed on a project basis. Each assignment is unique and costed without regard to other assignments. Examples are shipbuilding, construction projects, and public accounting firms. Project costing is opposed to process costing, where products to be valued are homogeneous. Prototyping --- A specialized system development technique for performing a determination where used needs are extracted, presented, and developed by building a working model of the system. Generally, these tools make it possible to create all files and processing programs needed for a business application in a matter of days or hours for evaluation purposes. QS-9000 Series Standards --- Quality management system requirements cooperatively developed and adopted by the Big Three automobile manufacturers, Chrysler, Ford, and General Motors, along with certain truck manufacturers. QS-9000
incorporates all of the main elements of the ISO 9001 standard and describes the minimum quality system requirements to emphasize continuous improvement, defect prevention, consistency, and elimination of waste. Quality costs --- The overall costs associated with prevention activities and the improvement of quality throughout the firm before, during and after production of a product. These costs fall into four recognized categories: internal failures, external failures, appraisal costs, and prevention costs. Internal failure costs relate to problems before the product reached the customer. These usually include rework, scrap, downgrades, reinspection, retest, and process losses. External failure costs relate to problems found after the product reaches the customer. These usually include such costs as warranty and returns. Appraisal costs are associated with the formal evaluation and audit of quality in the firm. Typical costs include inspection, quality audits, testing, calibration, and checking time. Prevention costs are those caused by improvement activities that focus on reducing failure and appraisal costs. Typical costs include education, quality training, and supplier certification. Quality function deployment (QFD) --- A methodology designed to ensure that all the major requirements of the customer are identified and subsequently met or exceeded through the resulting product design process and the design and operation of the supporting production management system. QFD can be viewed as a set of communication and translation tools. QFD tries to eliminate the gap between what the customer wants in a new product and what the product is capable of delivering. QFD often leads to a clear identification of the major requirements of the customers. These expectations are referred to as the voice of the customer (VOC). Rapid prototyping --- 1) The transformation of product designs into physical prototypes. Rapid prototyping relies on techniques such as cross functional teams, data sharing, and advanced computer and communication technology (e.g., CAD, CAM, stereo lithography, data links). Rapid prototyping involves producing the prototype on production equipment as often as possible. It improves product development times and allows for cheaper and faster product testing, assessment of the ease of assembly and costs, and validation before actual production tooling. 2) The transformation of system designs into computer system prototypes with which the users can experiment to determine the adequacy of the design to address their needs. Return on investment (ROI) --- A financial measure of the relative return from an investment, usually expressed as a percentage of earnings produced by an asset to the amount invested in the asset. Single factor productivity --- The average amount of a given product (output) attributed to a unit of a given resource (input). Factors include labor and capital. Syn: partial productivity factor Statistical process control (SPC) --- The application of statistical techniques to control quality. Often the term Statistical process control is used interchangeably with statistical quality control. Statistical quality control (SQC) --- The application of statistical techniques to control quality. Often the term Statistical process control is used interchangeably with
statistical quality control, although statistical quality control includes acceptance sampling as well as Statistical process control. Strategic drivers --- Factors that influence business unit and manufacturing strategies. Sunk cost --- 1) The unrecovered balance of an investment. It is a cost, already paid, that is not relevant to the decision concerning the future that is being made. Capital already invested that for some reason cannot be retrieved. 2) A past cost that has no relevance with respect to future receipts and disbursements of a facility undergoing an economic study. This concept implies that since a past outlay is the same regardless of the alternatives selected, it should not influence the choice between alternatives. Supply chain --- 1) The process from the initial raw materials to the ultimate consumption of the finished product linking across supplier-user companies 2) The function inside and outside a company that enable the value chain to make product or provide service to the customer. Surge capacity --- The ability to meet sudden, unexpected increases in demand by expanding production with existing personnel and equipment. Synchronized production --- A manufacturing management philosophy that includes a consistent set of principles, procedures, and techniques where every action is evaluated in terms of the global goal of the system. Both kanban, which is a part of the JIT philosophy, and drum buffer rope, which is a part of the theory of constraints philosophy, represent synchronized production control approaches. Syn: synchronous manufacturing. Target costing --- The process of designing a product to meet a specific cost objective. Target costing involves setting the planned selling price, subtracting the desired profits as well as marketing and distribution costs, thus leaving the required manufacturing or target cost. Theory of constraints (TOC) --- A management philosophy developed by Dr Eliyahu M. Goldratt that can be viewed as three separate but interrelated areas logistics, performance measurement, and logical thinking. Logistics include drum buffer rope scheduling, buffer management, and VAT analysis. Performance measurement includes throughput, inventory and operating expense, and the five focusing steps. Thinking process tools are important in identifying the root problem (current reality tree), identifying and expanding win-win solutions (evaporating cloud and future reality tree), and developing implementation plans (prerequisite tree and transition tree). Syn: constraint theory. Total factor productivity --- A measure of the productivity of a department, plant, strategic business unit, firm, etc., that combines the individual productivities of all its resources including labor, capital, energy, material, and equipment. These individual factor productivities are often combined by weighing each according to its monetary value and then adding them. For example, if material accounts for 40% of the total cost of sales and labor 10% of the total cost of sales, etc, total factor productivity = .4 (material productivity) + .1 (labor productivity) + etc.
Total quality management (TQM) --- A term coined to describe Japanese-style management approaches to quality improvement. Since then total quality management (TQM) has taken on many meanings. Simply put TQM in a management approach to long-term success through customer satisfaction. TQM is based on the participation of all members of an organization in improving processes, goods services and the culture in which they work. The method of implementing this approach are found in teachings of such a quality leaders as Philip B. Crosby, W. Edwards Deming, Armand V Feignbaum, Kaoru Ishikawa, J. M. Juran and Genichi Taguchi. Value added --- 1) In accounting the addition of direct labor direct material, and allocated overhead assigned at an operation. It is the cost roll-up as a part goes through a manufacturing process to finished inventory 2) In current manufacturing terms, the actual increase of utility from the viewpoint of the customer as a part of transformed form raw material to finished inventory. It is a contribution made by an operation or a plant to the final usefulness and value of product, as seen by the customer. The objective is to eliminate all non-value added activities in producing and providing a good or service. Value chain --- The functions within a company that add value to the goods or services that the organization sells to customers and for which it receives payment. Variable costing --- An inventory valuation method in which only variable production costs are applied to the product; fixed factory overhead is not assigned to the product. Traditionally, variable production costs are direct labour, direct material, and variable overhead costs. Variable costing can be helpful for internal management analysis but is not widely accepted for external financial reporting. For inventory order quantity purposes, however, the unit costs must include both the variable and allocated fixed costs to be compatible with the other terms in the order quantity formula. For make or buy decisions, variable costing should be used rather than full absorption costing. Syn: direct costing. VAT analysis --- In the theory of constraints, a procedure for determining the general flow of parts and products from raw materials to finished products (logical product structure). A V logical structure starts with one or a few raw materials, and the product expands into a number of different products as it flows through divergent points in its routings. The shape of an A logical structure is dominated by converging points. Many raw materials are fabricated and assembled into a few finished products. A T logical structure consists of numerous similar finished products assembled from common assemblies, subassemblies, and parts. Once the general parts flow s determined, the system control points (gating operations, convergent points, divergent points, constraints, and shipping points) can be identified and managed. Vertical integration --- The degree to which a firm has decided to directly produce multiple value adding stages from raw material to the sale of the product to the ultimate consumer. The more steps in the sequence, the greater the vertical integration. A manufacturer that decides to begin producing parts, components, and materials that it normally purchases is said to be backward integrated. Likewise, a manufacturer that decides to take over distribution and perhaps sale to the ultimate consumer is said to be forward integrated.
Voice of the customer (VOC) --- Actual customer descriptions in words for the functions and features customers desire for goods and services. In the strict definition, as relates to quality function deployment (QFD), the term customer indicates the external customer of the supplying entity.
PRIMARY REFERENCES
1. 2. 3. 4. Managerial Accounting 10th edn. By Garrison R.H. Project Management: A Managerial Approach Supply Chain Optimisation Operations Strategy