Flashcards - Topic 2 Biological Molecules - CAIE Biology A-Level (2022-2024 Syllabus)

CAIE Biology A-level
Topic 2: Biological Molecules

Flashcards
PMT Education is licensed under https://bit.ly/pmt-cc

This work by https://bit.ly/pmt-edu-cc CC BY-NC-ND 4.0
https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Outline the Benedict’s test for reducing
sugars
Outline the Benedict’s test for reducing sugars
1. Add an equal volume of Benedict’s reagent to the

sample to be test.
2. Heat the mixture in a water bath at 100°C for 5
minutes.
3. Positive result: colour change from blue to green to
yellow to orange to brick-red. Precipitate forms.
Outline the Benedict’s test for
non-reducing sugars
Outline the Benedict’s test for non-reducing sugars
1. Reducing sugar test, negative result, reagent remains blue.
2. Hydrolyse non-reducing sugars (e.g. sucrose) into their
monomers by adding an equal volume of HCl.
3. Heat in a boiling water bath for 5 minutes.
4. Neutralise the mixture using sodium hydrogen carbonate
solution.
5. Proceed with the Benedict’s test as usual.
How can the Benedict's test be made
more quantitative?
How can the Benedict's test be made more quantitative?
Either:
Measure the time from immersing solution in water bath till

the first colour change is produced
Or:
Create standard solutions of known concentrations, and

compare colour change to estimate concentration
Outline the Biuret test for proteins
Outline the Biuret test for proteins
1. Add an equal volume of sodium hydroxide to a sample at room

temperature.
2. Add a few drops of dilute copper (II) sulfate solution. Swirl to mix.
(steps 1 & 2 make the Biuret reagent)
3. Positive result: colour change from pale blue to purple .

Negative result: solution remains blue.
Describe how to test for and measure
the presence of starch in a sample
Describe how to test for and measure the presence
of starch in a sample
1. Add iodine solution.
1. Positive result: colour changes from yellow-brown to blue-black.
Describe the emulsion test for fats
and oils
Describe the emulsion test for fats and oils.
● Add ethanol to the sample and shake

● Allow the mixture to settle
● Add an equal volume of water
● Record any observations
Describe the positive result of an
emulsion test
Describe the positive result of an emulsion test
White, cloudy emulsion forms.
Define ‘monomer’
Define ‘monomer’
A single subunit that is used to build

larger polymers.
Define ‘polymer’
Define ‘polymer’
A large molecule comprising of repeating

subunits (monomers), often joined by
condensation.
Define ‘macromolecule’
Define ‘macromolecule’
A large biological molecule.
Define ‘monosaccharide’, ‘disaccharide’,
‘polysaccharide’
Define 1. monosaccharide, 2. disaccharide, 3.
polysaccharide
1. A single unit of carbohydrate
2. 2 units of carbohydrate joined by condensation,
held by a glycosidic bond
3. A polymer with monomers of monosaccharides
joined together by condensation, held by
glycosidic bonds
Draw & describe the structure of 𝛂 and β glucose
Draw & describe the structure of 𝛂 and β glucose
Both are hexose

monosaccharides (6C)
with a ring structure
𝛂 glucose ꞵ glucose
What is the difference between 𝛂 and β glucose?
What is the difference between 𝛂 and β glucose?
The OH group on carbon 1 for alpha

glucose is below the plane, while that for
beta glucose is above the plane
What happens in condensation
reactions- with reference to glycosidic
bonds & the type of bond ?
What happens in condensation reactions- with reference to glycosidic
bonds & the type of bond ?
A chemical bond forms between two molecules and a molecule of

water is produced. H is removed from one molecule- OH from
another.
When this occurs between carbohydrates- it is referred to as a

glycosidic bond- this is a type of covalent bond.
What is meant by the terms reducing &
non reducing sugars?
What is meant by the terms reducing & non reducing
sugars?
Reducing sugar- is able to reduce other sugars to form di
or polysaccharides due to free groups which can be
condensed. All monosaccharides are reducing sugars.
Non reducing- Do not possess a condensable free group
∴ cannot reduce other sugars
State whether the following are reducing
or non reducing sugars- glucose,
fructose, maltose, sucrose
State whether the following are reducing or non reducing sugars-
glucose, fructose, maltose, sucrose
Reducing:
Glucose, Fructose, Maltose
Non reducing:
Sucrose
State how sucrose is formed via the
formation of a glycosidic bond
State how sucrose is formed via the formation of a glycosidic bond.
𝛂 glucose + ꞵ fructose form sucrose via the

omission of H2O (condensation reaction) forming a
glycosidic bond between them
How are glycosidic bonds broken? What
is this known as?
How are glycosidic bonds broken? What is this known as?
Water is used to break the glycosidic bond. This is known as a hydrolysis

reaction- consider the meaning behind the term “hydrolysis”.
Link- we added HCl to test for non-reducing sugars to hydrolyse their

poly- or di-saccharides.
Describe the structures of amylose & amylopectin
Describe the structures of amylose & amylopectin
● Amylose: 1,4-glycosidic bonds, unbranched
helical
● Amylopectin: 1-4 & 1,6-glycosidic bonds,
branched
How do the structures of amylose &
amylopectin relate to their function?
How do the structures of amylose & amylopectin relate to their
function?
Amylose & amylopectin (starch) act as a storage polymer of 𝛼-glucose in
plant cells:
● insoluble = no osmotic effect on cells
● large = does not diffuse out of cells
Amylose: Amylopectin:
● 1,4 & 1,6 glycosidic bonds
● 1,4 glycosidic bonds
● branched = many terminal ends for
● Unbranched helix= compact
rapid hydrolysis into glucose
Describe the structure and functions of
glycogen
Describe the structure and functions of glycogen
Main storage polymer of 𝛼-glucose in animal cells (but also
found in plant cells):
● 1,4 & 1,6 glycosidic bonds.
● Branched (more so than amylopectin) = many terminal
ends for hydrolysis.
● Insoluble = no osmotic effect & does not diffuse out of
cells.
● Compact.
Describe the structure and functions of
cellulose
Describe the structure and functions of cellulose
Polymer of 𝛽-glucose (polysaccharide) gives rigidity to plant cell
walls (prevents bursting under turgor pressure, holds stem up).
● 1,4 glycosidic bonds.

● Straight-chain, unbranched molecule.
● Alternate glucose molecules are rotated 180°.
● H-bond crosslinks between parallel strands form microfibrils =
high tensile strength.
What is the difference between saturated
and unsaturated fats?
What is the difference between saturated and
unsaturated fats?
● Saturated fats have no C=C bonds, and are solid at room

temperature due to strong intermolecular forces.
● Unsaturated fats have one or more C=C bonds, and are liquid
at room temperature due to weak intermolecular forces.
Describe the structure of a triglyceride,
with reference to how it is formed
Describe the structure of a triglyceride, with reference to how
it is formed.
One molecule of glycerol forms ester bonds with three fatty acids-
these can be saturated or unsaturated- via condensation reactions.
Image source: OpenStax College, CC BY 3.0
Relate the structure of triglycerides to
their functions
Relate the structure of triglycerides to their functions
● High energy-to-mass ratio - energy storage.
● Insoluble hydrocarbon chain - no effect on water potential of cells,

used for waterproofing.
● Slow conductor of heat - thermal insulation.
● Less dense than water - buoyancy of aquatic animals.

● Protects organs- high melting point- very stable molecule resistant to
large amounts of force
Describe the structure and function of phospholipids
Describe the structure and function of phospholipids
Polar molecule: glycerol backbone attached to 2
hydrophobic fatty acid tails and 1 hydrophilic polar
phosphate head.
● Forms phospholipid bilayer in water - component of

membranes- the hydrophobic the tails allow for control
of movement of water soluble molecules in and out of
cells
Describe the common structure of an
amino acid
Describe is the common structure of an amino acid
● Amine group (-NH2)

● Variable side chain (R)
● Carboxyl group (-COOH)
● H atom
How are peptide bonds formed?
How are peptide bonds formed?
The OH is lost from the carboxyl group,
and an H from the amine group
(condensation), forming a peptide bond
(-CONH-).
Describe and name the process by
which peptide bonds are broken
Describe and name the process by which peptide bonds are
broken
H2O is split to H + OH, OH returns to the

carboxyl group, H to the amine- this is a
hydrolysis reaction.
What is the primary structure of a
protein?
What is the primary structure of a protein?
A sequence of amino acids in a

polypeptide, held by peptide bonds.
What is secondary structure?
What is secondary structure?
The regular folding of a polypeptide into

alpha helices and beta pleated sheets,
held by hydrogen bonds
What is tertiary structure?
What is tertiary structure?
The further coiling of a protein into its

functional 3D shape. Held by hydrogen,
ionic, and disulphide bonds, and
hydrophobic interactions
What is quaternary structure?
What is quaternary structure?
The folding of 2 or more polypeptides
into a 3D shape, which may include
prosthetic (non-protein) groups. Held by
hydrogen, ionic, and disulphide bonds,
and hydrophobic interactions.
Describe the structure of haemoglobin
Describe the structure of haemoglobin
● Globular conjugated protein with prosthetic group.
● 2 𝛼-chains, 2 𝛽-chains, 4 prosthetic haem groups.
● Water-soluble so dissolves in plasma.
● Fe2+ haem group forms coordinate bond with O2.
● Tertiary structure changes so it is easier for subsequent
O2 molecules to bind (cooperative binding).
State the main differences between
globular and fibrous proteins
State the main differences between globular and fibrous proteins
Globular proteins are soluble & involved in physiological

processes e.g. haemoglobin.
Fibrous proteins are insoluble & have a structural role
e.g. collagen.
State the features of a globular protein,
with reference to haemoglobin
State the features of a globular protein, with reference to haemoglobin.
● Spherical & compact.

● Hydrophilic R groups face outwards & hydrophobic R groups
face inwards = usually water-soluble.
● Involved primarily in physiological roles e.g. metabolic
processes e.g. enzymes such as amylase, insulin (2
polypeptide chains linked by 2 disulfide bonds), haemoglobin.
● Compact nature means haemoglobin can transport more
oxygen per unit of blood.
Describe the structure of collagen
Describe the structure of collagen
Fibrous protein: insoluble, long strands with high tensile
strength.
Made up of 3 polypeptide chains coiled to form a triple helix.
Every third amino acid is glycine (the smallest amino acid).
Collagen molecules lie parallel to form collagen strands, held
by staggered covalent cross bridges between lysine residues.
How does hydrogen bonding occur in
water?
How does hydrogen bonding occur in water?
The 𝛿+ hydrogen on one water molecule

is attracted to the lone pair of the 𝛿-
oxygen on another water molecule.
What are the properties of water due to
hydrogen bonding?
What are the properties of water due to hydrogen bonding?
High surface tension .
Acts as a solvent for water soluble molecules so can act as a transport
medium.
High specific heat capacity.
High latent heat of vaporisation.
Higher boiling point than expected (liquid at room temperature).
Ice is less dense than liquid water.

Flashcards - Topic 2 Biological Molecules - CAIE Biology A-Level (2022-2024 Syllabus)

Uploaded by

Copyright:

Available Formats

Flashcards - Topic 2 Biological Molecules - CAIE Biology A-Level (2022-2024 Syllabus)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Flashcards - Topic 2 Biological Molecules - CAIE Biology A-Level (2022-2024 Syllabus)

Uploaded by

Copyright:

Available Formats

CAIE Biology A-level

Topic 2: Biological Molecules

PMT Education is licensed under https://bit.ly/pmt-cc

1. Add an equal volume of Benedict’s reagent to the

Measure the time from immersing solution in water bath till

Create standard solutions of known concentrations, and

1. Add an equal volume of sodium hydroxide to a sample at room

3. Positive result: colour change from pale blue to purple .

● Add ethanol to the sample and shake

White, cloudy emulsion forms.

A single subunit that is used to build

A large molecule comprising of repeating

A large biological molecule.

Both are hexose

The OH group on carbon 1 for alpha

A chemical bond forms between two molecules and a molecule of

When this occurs between carbohydrates- it is referred to as a

Glucose, Fructose, Maltose

𝛂 glucose + ꞵ fructose form sucrose via the

Water is used to break the glycosidic bond. This is known as a hydrolysis

Link- we added HCl to test for non-reducing sugars to hydrolyse their

● 1,4 glycosidic bonds.

● Saturated fats have no C=C bonds, and are solid at room

Image source: OpenStax College, CC BY 3.0

● High energy-to-mass ratio - energy storage.

● Insoluble hydrocarbon chain - no effect on water potential of cells,

● Slow conductor of heat - thermal insulation.

● Less dense than water - buoyancy of aquatic animals.

● Forms phospholipid bilayer in water - component of

● Amine group (-NH2)

H2O is split to H + OH, OH returns to the

A sequence of amino acids in a

The regular folding of a polypeptide into

The further coiling of a protein into its

Globular proteins are soluble & involved in physiological

● Spherical & compact.

The 𝛿+ hydrogen on one water molecule

You might also like