HPE ProLiant DL365 Gen11

QuickSpecs HPE ProLiant DL365 Gen11
Overview
HPE ProLiant DL365 Gen11

Are you looking for a scalable, compute-dense solution for high-performance workloads such as VDI, EDA, or
CAD?
The new HPE ProLiant DL365 Gen11 server is a rack-optimized 1U 2P dense solution that delivers exceptional
compute performance, upgraded high-speed data transfer rate and memory depth at 2P compute capability.
Powered by 4th Generation AMD EPYCTM Processors with up to 96 cores, increased memory bandwidth (up to
6 TB), and high-speed PCIe Gen5 I/O, the HPE ProLiant DL365 Gen11 server is a superb rack-optimized, 1U
2P, dense solution.
The silicon root of trust anchors the server firmware to an HPE-exclusive ASIC, creating an immutable
fingerprint for the AMD Secure Processor that must be matched exactly before the server boots.
The HPE ProLiant DL365 Gen11 server is an excellent choice for those who require increased compute density
with built-in security and flexibility.
8 SFF Front View - 8 SFF & No Media Option Shown

1. Quick removal access panel 6. Health LED
2. Serial no. label pull tab 7. NIC status LED
3. Optional Media Bay: 8. UID button LED
Option Shown: no media
Optional: +2 SFF U.3 Tri-mode drive cage (total max
10 SFF)
Optional: 9.5mm SATA DVD-ROM/RW Optical Drive
4. USB 3.2 Gen1 port 9. iLO service port
5. Power On/Standby button and system power LED 10. 8 SAS/SATA/NVMe drive bays
DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 1

Overview
Internal View
1. DDR5 DIMM slots. Shown populated in 24 slots 6. (Under) OCP 3.0 Slot 1
2. Hot Plug redundant HPE Flexible Slot Power 7. 2x USB 3.2 Gen1 ports
supplies
3. Secondary Riser connector cage, optional 8. Fan cage shown with 7 High Performance
Fans
4. (Under) OCP 3.0 Slot 2 9. 2 Processors (heatsinks shown)
5. Primary PCIe riser cage, standard

Overview
Rear View - Standard for all DL365 Gen11

1. Slot 1 PCIe 5.0 6. VGA port
2. OCP 3.0 Slots 7. Serial port (optional)
3. Slot 2 PCIe 5.0 8. Dedicated iLO management port
4. Hot-plug Power Supply 2 9. USB 3.2 Gen1 ports
5. Hot-plug Power Supply 1 10. UID LED
What's New
Supports the 4th Generation AMD EPYCTM Processors that supports up to 96 cores, 400W, and
384MB of L3 Cache.
12 DIMM channels per processor for up to 6TB total DDR5 memory 4800MT/s.
A new 96GB DDR5 RDIMM supported.
Advanced data transfer rate and higher network speed from the PCIe Gen5 serial expansion bus
Includes HPE Integrated Lights-Out 6 (iLO 6) server management software
Supports hot-pluggable, high-availability RAID M.2 boot options.
Supports up to 20 EDSFF drive bay.
Supports up to 2x Single Width or 2x Double Width GPU cards at the front chassis.
OpenBMC Capable through iLO6 Transfer of Ownership Process

Standard Features
Platform Information
Form Factor
1U rack
Chassis Types
8 SFF with optional optical drive kit, and optional SFF or NVMe drive bay options
20 EDSFF drive bay.
2 Single Width or 2 Double Width GPUs with 8 EDSFF or 4SFF U.3 NVMe drive bay.
System Fans
Choice of Standard Fan Kit and Performance Fan Kit. One fan per kit.
2 CPUs
− Standard fan kits should be supported when the processors are equal to or lower than cTDP 240W
− Performance fan kits should be supported when the processors are higher than cTDP 240W
− Performance fan kits should be required when drive is NVMe or SAS4 drives.
− Performance fan kits should be required when 10 SFF SAS/SATA/NVMe is configured
− Performance fan kits should be required when EDSFF or GPU CTO Servers are configured
Notes:
− The DL365 Gen11 supports up to 7 fans with fan redundancy built in. One fan rotor failure will place server
in degraded mode but fully functional. Two fan rotor failures could trigger warning and imminent server
shutdown.
− Each Fan kits are designated to operate under different configuration. For more information, please refer
to the Cooling option message in the Unique option section
Processors Up to 2 of the following depending on model.

Notes: For more information regarding AMD EPYC processors, please see the following:
https://www.amd.com/en/products/epyc
Notes:

Standard Features
− All 4th generation AMD EPYC processors can support up to 3TB of memory each under 1DPC, 12
channel per processor. 6TB of memory per two processors.
− 160 PCIe 5.0 lanes support with two sockets. Motherboard supports 3XGMI two-processor interconnect by
default.
− The wattage information indicates the default cTDP (Configurable TDP) of the processor.
Chipset
No chipset - System on Chip (SoC) design.
System Management Chipset

HPE iLO 6 ASIC
Notes: Read and learn more in the iLO QuickSpecs.
Memory
One of the following depending on model
Type HPE DDR5 Smart Memory,
Registered (RDIMM)
DIMM Slots 24
Available
12 DIMM slots per processor, 12 channels per processor, 1 DIMM per channel
Maximum 6.0 TB
capacity
24 x 256 GB RDIMM* @ 4800 MT/s at 1 DPC
(RDIMM)
Notes:
− All processors support up to 3TB memory per server.
− LRDIMM and Persistent Memory is not supported.
− For additional information, please see the HPE DDR5 Smart Memory QuickSpecs.
− For General Server Memory and Persistent Memory Population Rules and Guidelines, see details here:
http://www.hpe.com/docs/memory-population-rules
Memory Protection
Advanced ECC
Advanced ECC uses single device data correction to detect and correct single and all multibit error that
occurs within a single DRAM chip.
Online Spare
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
Notes: For more information see our Memory RAS feature technical whitepaper.
Expansion Slots
Primary Riser
Slots # Technology Bus Width Connector Slot Form Factor Notes
Width
1 PCIe 5.0 X16 X16 Full-height, Half-length Proc 1
slot

Standard Features
Secondary Riser
Width
2 PCIe 5.0 X16 X16 Full-height, Half-length Proc 2
slot
2 PCIe 5.0 X16 X16 Low Profile Proc 2
GPU Riser 1
Width
4 PCIe 5.0 X16 X16 Full-height, Full-length Proc 2
slot
GPU Riser 2
Width
5 PCIe 5.0 X16 X16 Full-height, Full-length Proc 1
slot
Notes:
− Secondary riser position supports both Low Profile or FHHL cards. Only one can be supported at a time.
− When NS204i-u Hot Plug Boot Optimized Storage Device is selected, low profile secondary riser (P55029-
B21) must be in the configuration.
− When both the Secondary Slot 2 & GPU Riser #1 Slot 4 are supported, Slot 2 & Slot 4 combined can
support up to 112GB/s bandwidth due to processor limitations.
− When both the GPU Riser #2 Slot 5 & Slot 21 (OCP1) are supported, Slot 5 & Slot 21 combined can
support up to 112GB/s bandwidth due to processor limitations.
Storage Controllers
NVMe Boot Device
HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device
Notes:
− This kit does not occupy a PCIe slot

− NS204i-u is external accessible
− NS204i-u includes embedded 2x 480GB NVMe SSD
− RAID 1 supported on the NS204i-u boot optimized storage device
Essential RAID Controllers
HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID Controllers
HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller
HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller
HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller
HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage Controller
HPE SR932i-p Gen11 x32 Lanes 8GB Wide Cache PCI SPDM Plug-in Storage Controller
Notes:
− For additional details, please visit:
HPE Compute MR Gen11 Controllers Quick Specs

Standard Features
HPE Compute SR Gen11 Controllers Quick Specs
Graphics
Integrated Video Standard
Video modes up to 1920 x 1200@60Hz (32 bpp)

16MB Video Memory
HPE iLO 6 on system management memory
64 MB Flash
8 Gbit DDR 4 with ECC protection
Internal Storage Devices

Optical Drive
Available on 8 SFF CTO Servers as an option (DVD-ROM or DVD-RW)
Hard Drives
None ship standard
Maximum Storage
Storage Capacity Configuration
Hot Plug SFF SAS HDD 24 TB (8+2) x 2.4 TB
Hot Plug SFF SATA HDD 20 TB (8+2) x 2.0 TB
Hot Plug SFF SAS SSD 76.8 TB (8+2) x 7.68 TB
Hot Plug SFF SATA SSD 76.8 TB (8+2) x 7.68 TB
Hot Plug SFF NVMe PCIe U.3 SSD 153.6 TB (8+2) x 15.36 TB
Power Supply
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Available in 94% Power Efficiency.
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit
Notes:
− Available in 94% Power Efficiency.
− 200-240VAC power input only.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for
hot plug, tool-less installation into HPE ProLiant Gen11 Servers. Flex Slot power supplies are certified for
high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power
supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy
costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper

Standard Features
cord is also included with each standard AC power supply option kit. If a different power cord is required,
please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies.
Interfaces
Serial Ports 1 port - Optional in rear
Video Ports 1 Rear VGA Port - Standard
Network Ports None. Choice of OCP or stand up card, supporting a wide
arrange of NIC
adapters
HPE iLO Remote Management 1 Gb Dedicated
Network Port
Front iLO Service Port 1 standard
USB 3.2 Gen1 5 standard on all models: 1 front, 2 rear, 2 internal
SID (Systems Insight Display) Optional
Operating Systems and Virtualization Software Support for ProLiant Servers

Windows Server 2019
Windows Server 2022
Red Hat Enterprise Linux (RHEL) 8.6
Red Hat Enterprise Linux (RHEL) 9.0
SUSE Linux Enterprise Server (SLES) 15 SP4
VMware ESXi 7.0 U3
VMware ESXi 8.0
Notes: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for
OS and Virtualization Software and latest listing of software drivers available for your server.
https://www.hpe.com/us/en/servers/server-operating-systems.html
HPE Server UEFI

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and
more secured configuration than the legacy ROM while interacting with your server at boot time. HPE
ProLiant Gen11 servers have a UEFI Class 3 implementation.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as
Secure Boot and Secure Start enable for enhanced security

Operating system specific functionality
Support for > 2.2 TB (using GPT) boot drives
USB 3.1 Gen1 Stack
Embedded UEFI Shell
Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
PXE boot support for IPv6 networks
Workload Profiles for simple performance optimization
Embedded TPM Support
UEFI Boot Mode only
TPM 2.0 Support

Standard Features
NVMe Boot Support
iSCSI Software Initiator Support
HTTP/HTTPs Boot support as a PXE alternative
Boot support for option cards that only support a UEFI option ROM
Notes:
- For UEFI Boot Mode, boot environment and OS image installations should be configured properly to
support UEFI.
- Enabling TPM 2.0 no longer requires TPM module option kit for Gen11. It is an embedded feature.
Industry Standard Compliance

ACPI 6.1 Compliant
PCIe 5.0 Compliant
WOL Support
Microsoft® Logo certifications
PXE Support
VGA/Display Port
USB 3.2 Gen1 Compliant
USB 2.0 Compliant
Energy Star 4.0
Notes: Energy Star 4.0 is supported. Please configure P68503-B21 to trigger Energy Star 4.0
SMBIOS 3.1
UEFI 2.7
UEFI Class 3
Redfish API
IPMI 2.0
Secure Digital 2.0
Advanced Encryption Standard (AES)
Triple Data Encrytion Standard (3DES)
SNMP v3
TLS 1.2
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH
CLP)
Active Directory v1.0
European Union (EU) eco-design regulations for server and storage products, known as Lot 9, go into
effect on March 1st, 2020. Among other requirements, for servers this directive establishes power
thresholds for idle state, as well as efficiency and performance in active state which vary among
configurations. HPE ProLiant Gen11 servers are compliant with Lot9 requirements. For more
information regarding HPE Lot 9 conformance, please visit:
https://www.hpe.com/us/en/about/environment/msds-specs-more.html
ASHRAE A3/A4
Notes: For additional technical thermal details regarding ambient temperatures, humidity and
features support please visit: https://www.hpe.com/support/ASHRAEGen11
UEFI (Unified Extensible Firmware Interface Forum)

APML 1.0
Embedded Management
HPE Integrated Lights-Out (HPE iLO)

Standard Features
Monitor your servers for ongoing management, service alerting, reporting and remote management with
HPE iLO.
Learn more at http://www.hpe.com/info/ilo
UEFI
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface
(UEFI).
Learn more at http://www.hpe.com/servers/uefi.
Intelligent Provisioning
Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning.
Learn more at https://support.hpe.com/hpesc/public/docDisplay?docId=c04465280&docLocale=en_US.
iLO RESTful API

iLO RESTful API is Redfish API conformance and offers simplified server management automation such as
configuration and maintenance tasks based on modern industry standards. Learn more at
http://www.hpe.com/info/restfulapi.
OpenBMC Support
OpenBMC Capable through iLO6 Transfer of Ownership Process.
Learn more at OpenBMC enablement on HPE ProLiant servers | HPE
Server Utilities
Active Health System
The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that
provides continuous, proactive health monitoring of HPE servers. Learn more at
http://www.hpe.com/servers/ahs.
Active System Health Viewing

The Active System Health Viewer (AHSV) is deprecated as of March 2022. Users are now recommended to
use the InfoSight for Servers Portal for AHS viewing capabilities. In InfoSight for Servers portal, users will
also be able to view hardware configuration details, firmware and driver information, warranty and support
status of a server, wellness alerts, and create support cases for servers under a valid warranty or support
contract.
HPE InfoSight provides the same security assurances as that of AHSV. Furthermore, InfoSight can be used
as an AHSV replacement even if customers do not want to share AHSV logs and telemetry data on an
ongoing basis.
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM)
to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at
https://www.hpe.com/servers/smart-update.html
iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO
Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover,
inventory and update Gen8, Gen9, Gen10, Gen10 Plus, and Gen11 HPE servers. Use with an iLO
Advanced License to unlock full capabilities.
Learn more at http://www.hpe.com/servers/iLOamplifierpack.

Standard Features
RESTful Interface Tool
RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover
and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.
Scripting Tools
Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for
Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at
http://www.hpe.com/servers/powershell.
HPE OneView Standard

HPE OneView is an on premesis, multi-generational server monitoring and management solution. HPE
OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional
fees. Customers can upgrade their management experience with an HPE OneView Advanced license, all
provided by the same tool. Learn more at http://www.hpe.com/info/oneview.
HPE GreenLake for Compute Ops Management

HPE is intelligently transforming compute management with an intuitive cloud operating experience through
HPE GreenLake cloud platform to streamline and secure operations from edge-to-cloud. Automated key
lifecycle tasks, for onboarding, updating, managing, and monitoring HPE servers, brings agility and greater
efficiencies to wherever compute devices reside via a unified single browser-based interface. Manage
single locations or multiple, distributed sites. Keep tens to thousands of servers secure with batch policy
controls and automated updates.
Compute Ops Management is cloud-native software that is continually updated with new services, features,
patches, and fixes. The management application resides in the HPE GreenLake cloud platform (access via
https://console.greenlake.hpe.com) and leverages the HPE GreenLake architecture, security, and unified
operations.
A 3-year subscription to HPE GreenLake for Compute Ops Management is added by default when ordering
an HPE ProLiant Gen11 rack, tower, or micro server.
For more information, visit the HPE GreenLake for Compute Ops Management QuickSpecs:
https://www.hpe.com/psnow/doc/a50004263enw
Security
UEFI Secure Boot and Secure Start support
Immutable Silicon Root of Trust
FIPS 140-3 validation (iLO 6 certification in progress)
Common Criteria certification (iLO 6 certification in progress)
Configurable for PCI DSS compliance
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
Support for Commercial National Security Algorithms (CNSA)
Tamper-free updates - components digitally signed and verified
Secure Recovery - recover critical firmware to known good state on detection of compromised
firmware
Ability to rollback firmware
Secure erase of NAND/User data
TPM (Trusted Platform Module) 2.0 option
Bezel Locking Kit option
Chassis Intrusion detection option
Notes: Enabling TPM 2.0 no longer requires TPM module option kit for Gen11. It is an embedded feature
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide

Standard Features
network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support
and repair is available for three years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty services are available through HPE
Services operational services or customized service agreements. Hard drives have either a one year or
three year warranty; refer to the specific hard drive QuickSpecs for details.
Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day
response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts.
These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel
and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR
parts are also designed for easy replacement but may involve added complexity. Customers may choose to
have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
https://www.hpe.com/us/en/search-results.html?page=1&q=servers%20warranty&autocomplete=0

Optional Features
Server Management
HPE iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant
servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM),
multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual
folders. You can also activate the enhanced security and power management functionality.
HPE OneView Advanced

HPE OneView Advanced offers a sophisticated level of automation to infrastructure management by taking
a template driven approach to provisioning, updating, and integrating compute, storage, and networking
infrastructure. It builds upon the base features of HPE OneView Standard, provides full-featured licenses
which can be purchased for managing multiple HPE server generations. To learn more visit
http://www.hpe.com/info/oneview.
HPE InfoSight for Servers

HPE InfoSight for Servers combines the cloud-based machine learning of InfoSight with the health and
performance monitoring of Active Health System (AHS) and iLO to optimize performance and predict and
prevent problems. The end result is an intelligent environment that modernizes IT operations and enhances
the support experience by predicting and preventing the infrastructure issues that lead to application
disruptions, wasted IT staff time and missed business opportunities.
Learn more at https://www.hpe.com/servers/infosight
Rack and Power Infrastructure

The story may end with servers, but it starts with the foundation that makes compute go - and business
grow. We've reinvented our entire portfolio of rack and power products to make IT infrastructure more
secure, more practical, and more efficient. In other words, we have created a stronger, smarter, and simpler
infrastructure to help you get the most out of your IT equipment. As an industry leader, Hewlett Packard
Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management and
system access.
HPE G2 Advanced and Enterprise Racks are perfect for the server room or today's modern data center with
enhanced airflow and thermal management, flexible cable management, and a 10 year Warranty to support
higher density computing.
HPE G2 PDUs offer reliable power in flexible form factors that operate at temperatures up to 60°C, include
color-coded outlets and load segments and a low-profile design for optimal access to the rack and support
for dense rack environments.
HPE Uninterruptible Power Systems are cost-effective power protection for any type of workload. Some
UPSs include options for remote management and extended runtime modules so your critical dense data
center is covered in power outages.
HPE KVM Solutions include a console and switches designed to work with your server and IT equipment
reliably. We've got a cost-effective KVM switch for your first rack and multiple connection IP switches with
remote management and security capabilities to keep your data center rack up and running.
Learn more about HPE Racks, KVM, PDUs and UPSs at HPE Rack and Power Infrastructure.
One Config Simple (OCS/SCE)

OCS/SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products not
available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an Authorized
Partner for assistance. https://h22174.www2.hpe.com/SimplifiedConfig/Welcome

Service and Support
HPE Services
No matter where you are in your digital transformation journey, you can count on HPE Services to deliver the
expertise you need when, where and how you need it. From planning to deployment, ongoing operations and
beyond, our experts can help you realize your digital ambitions.
https://www.hpe.com/services
Consulting Services
No matter where you are in your journey to hybrid cloud, experts can help you map out your next steps. From
determining what workloads should live where, to handling governance and compliance, to managing costs,
our experts can help you optimize your operations.
https://www.hpe.com/services/consulting
HPE Managed Services

HPE runs your IT operations, providing services that monitor, operate, and optimize your infrastructure and
applications, delivered consistently and globally to give you unified control and let you focus on innovation.
HPE Managed Services | HPE
Operational services
Optimize your entire IT environment and drive innovation. Manage day-to-day IT operational tasks while
freeing up valuable time and resources. Meet service-level targets and business objectives with features
designed to drive better business outcomes.
https://www.hpe.com/services/operational
HPE Complete Care Service

HPE Complete Care Service is a modular, edge-to-cloud IT environment service designed to help optimize
your entire IT environment and achieve agreed upon IT outcomes and business goals through a personalized
experience. All delivered by an assigned team of HPE Services experts. HPE Complete Care Service
provides:
A complete coverage approach -- edge to cloud

An assigned HPE team
Modular and fully personalized engagement
Enhanced Incident Management experience with priority access
Digitally enabled and AI driven customer experience
https://www.hpe.com/services/completecare
HPE Tech Care Service

HPE Tech Care Service is the operational support service experience for HPE products. The service goes
beyond traditional support by providing access to product specific experts, an AI driven digital experience, and
general technical guidance to not only reduce risk but constantly search for ways to do things better. HPE Tech
Care Service delivers a customer-centric, AI driven, and digitally enabled customer experience to move your
business forward. HPE Tech Care Service is available in three response levels. Basic, which provides 9x5
business hour availability and a 2-hour response time. Essential which provides a 15-minute response time
24x7 for most enterprise level customers, and Critical which includes a 6-hour repair commitment where
available and outage management response for severity 1 incidents.
https://www.hpe.com/services/techcare

Service and Support
HPE Lifecycle Services

HPE Lifecycle Services provide a variety of options to help maintain your HPE systems and solutions at all
stages of the product lifecycle. A few popular examples include:
Lifecycle Install and Startup Services: Various levels for physical installation and power on, remote access
setup, installation and startup, and enhanced installation services with the operating system.
HPE Firmware Update Analysis Service: Recommendations for firmware revision levels for selected HPE
products, taking into account the relevant revision dependencies within your IT environment.
HPE Firmware Update Implementation Service: Implementation of firmware updates for selected HPE
server, storage, and solution products, taking into account the relevant revision dependencies within your
IT environment.
Implementation assistance services: Highly trained technical service specialists to assist you with a
variety of activities, ranging from design, implementation, and platform deployment to consolidation,
migration, project management, and onsite technical forums.
HPE Service Credits: Access to prepaid services for flexibility to choose from a variety of specialized
service activities, including assessments, performance maintenance reviews, firmware management,
professional services, and operational best practices.
Notes: To review the list of Lifecycle Services available for your product go to:
https://www.hpe.com/services/lifecycle
For a list of the most frequently purchased services using service credits, see the HPE Service Credits Menu
Other Related Services from HPE Services:

HPE Education Services
Training and certification designed for IT and business professionals across all industries. Broad catalogue of
course offerings to expand skills and proficiencies in topics ranging from cloud and cybersecurity to AI and
DevOps. Create learning paths to expand proficiency in a specific subject. Schedule training in a way that
works best for your business with flexible continuous learning options.
https://www.hpe.com/services/training
Defective Media Retention

An option available with HPE Complete Care Service and HPE Tech Care Service and applies only to Disk or
eligible SSD/Flash Drives replaced by HPE due to malfunction.
Consult your HPE Sales Representative or Authorized Channel Partner of choice for any additional questions
and services options.
Parts and Materials

HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware
product in operating condition, including parts and materials for available and recommended engineering
improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product
data sheet will not be provided, repaired, or replaced as part of these services.
How to Purchase Services

Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise Authorized Service Partners:
Services for customers purchasing from HPE or an enterprise reseller are quoted using HPE order
configuration tools.
Customers purchasing from a commercial reseller can find services at
https://ssc.hpe.com/portal/site/ssc/

Service and Support

AI Powered and Digitally Enabled Support Experience
Achieve faster time to resolution with access to product-specific resources and expertise through a digital and
data driven customer experience
Sign into the HPE Support Center experience, featuring streamlined self-serve case creation and management
capabilities with inline knowledge recommendations. You will also find personalized task alerts and powerful
troubleshooting support through an intelligent virtual agent with seamless transition when needed to a live
support agent.
https://support.hpe.com/hpesc/public/home/signin
Consume IT On Your Terms

HPE GreenLake edge-to-cloud platform brings the cloud experience directly to your apps and data wherever
they are-the edge, colocations, or your data center. It delivers cloud services for on-premises IT infrastructure
specifically tailored to your most demanding workloads. With a pay-per-use, scalable, point-and-click self-
service experience that is managed for you, HPE GreenLake edge-to-cloud platform accelerates digital
transformation in a distributed, edge-to-cloud world.
Get faster time to market
Save on TCO, align costs to business
Scale quickly, meet unpredictable demand
Simplify IT operations across your data centers and clouds
To learn more about HPE Services, please contact your Hewlett Packard Enterprise sales representative or
Hewlett Packard Enterprise Authorized Channel Partner. Contact information for a representative in your area
can be found at "Contact HPE" https://www.hpe.com/us/en/contact-hpe.html
For more information
www.hpe.com/services

Pre-configured Models
Base & Performance Model

SKU Number P55016-B21 P55017-B21
P55016-291 P55017-291
P55016-AA1 P55017-AA1
Model Name HPE ProLiant DL365 Gen11 9124 HPE ProLiant DL365 Gen11 9224
3.0GHz 16-core 1P 32GB-R 8SFF 2.5GHz 24-core 1P 32GB-R 8SFF
800W PS Server 800W PS Server
Processor 9124 (16-Core, 3.0 GHz, 240W) 9224 (24-Core, 2.5 GHz, 240W)
Number of One processor One processor
Processors
Memory 32 GB RDIMM SR 4800 MT/s (1x 1Rx4 32 GB RDIMM SR 4800 MT/s (1x 1Rx4
32 GB) 32 GB)
Network Controller BCM 5719 1GbE 4p BASE-T OCP3 BCM 57416 10GbE 2p BASE-T OCP3
Adptr plus choice of standup card Adptr plus choice of standup card
Storage Controller HPE MR408i-o Gen11 x8 Lanes 4GB HPE MR408i-o Gen11 x8 Lanes 4GB
Cache OCP SPDM Storage Controller Cache OCP SPDM Storage Controller
Hard Drive None ship as standard None ship as standard
Internal Storage 8 SFF Chassis (upgradeable to 10 SFF 8 SFF Chassis (upgradeable to 10 SFF
front) front)
Optical Drive Bay Optional Optional
Optical Drive None ship as standard None ship as standard
PCI-Express Slots 1 slot (x16) as standard (2nd Slot 1 slot (x16) as standard (2nd Slot
upgradeable. Please refer to PCIe slot upgradeable. Please refer to PCIe slot
section in this doc) section in this doc)
Power Supply 1x 800W HPE FlexSlot Power Supply 1x 800W HPE FlexSlot Power Supply
Fans 5-standard fans 5-standard fans
Management Default: HPE iLO Standard with Default: HPE iLO Standard with
Intelligent Provisioning, HPE OneView Intelligent Provisioning, HPE OneView
Standard (requires download) Standard (requires download)
Energy Star 3.0 certified 3.0 certified
Form Factor 1U Rack 1U Rack
Warranty 3-year parts, 3-year labor, 3-year onsite 3-year parts, 3-year labor, 3-year onsite
support with next business day support with next business day
response. response.
Country Code Key

xx1 = B21 Worldwide
xx1 = 291 Japan
xx1 = AA1 PRC
xx1 = 421 EU

Pre-configured Models
Base & Performance Model

SKU Number P59707-421 P59708-421
Model Name HPE ProLiant DL365 Gen11 9124 HPE ProLiant DL365 Gen11 9224
2.7GHz 16-core 1P 32GB-R 8SFF 2.7GHz 16-core 1P 32GB-R 8SFF
1000W PS EU Server 1000W PS EU Server
Processor 9124 (16-Core, 3.0 GHz, 240W) 9224 (24-Core, 2.5 GHz, 240W)
Number of One processor One processor
Processors
Memory 32 GB RDIMM SR 4800 MT/s (1x 2Rx8 32 GB RDIMM SR 4800 MT/s (1x 2Rx8
32 GB) 32 GB)
Network Controller BCM 5719 1GbE 4p BASE-T OCP3 BCM 57416 10GbE 2p BASE-T OCP3
Adptr plus choice of standup card Adptr plus choice of standup card
Storage Controller HPE MR408i-o Gen11 x8 Lanes 4GB HPE MR408i-o Gen11 x8 Lanes 4GB
Cache OCP SPDM Storage Controller Cache OCP SPDM Storage Controller
Hard Drive None ship as standard None ship as standard
Internal Storage 8 SFF Chassis (upgradeable to 10 SFF 8 SFF Chassis (upgradeable to 10 SFF
front) front)
Optical Drive Bay Optional Optional
Optical Drive None ship as standard None ship as standard
PCI-Express Slots 1 slot (x16) as standard (2nd Slot 1 slot (x16) as standard (2nd Slot
upgradeable. Please refer to PCIe slot upgradeable. Please refer to PCIe slot
section in this doc) section in this doc)
Power Supply 1x 1000W HPE FlexSlot Power Supply 1x 1000W HPE FlexSlot Power Supply
Fans 5-standard fans 5-standard fans
Management Default: HPE iLO Standard with Default: HPE iLO Standard with
Intelligent Provisioning, HPE OneView Intelligent Provisioning, HPE OneView
Standard (requires download) Standard (requires download)
Energy Star 3.0 certified 3.0 certified
Form Factor 1U Rack 1U Rack
Warranty 3-year parts, 3-year labor, 3-year onsite 3-year parts, 3-year labor, 3-year onsite
support with next business day support with next business day
response. response.
Country Code Key

xx1 = B21 Worldwide
xx1 = 291 Japan
xx1 = AA1 PRC
xx1 = 421 EU

Configuration Information
Smart Templates from HPE

HPE is releasing new Smart Template technology in the One Config Advanced (OCA) configurator. These
Templates represent the CTO equivalents of the top-selling BTO configurations. They are intended to
provide simple starting points to assist you in easily creating and customizing your desired Server solutions.
HPE Servers that have Platform Templates, developed by HPE Product Managers, will have a separate tab
in the HPE OCA configurator.
Workload Solutions Templates from HPE
The Workload Solutions Templates build on the Smart Templates technology to easily develop working
configurations of the most compelling Workload Solutions. The templates complement the Reference Builds
developed by HPE. Workload Solutions templates preconfigure some of the key architecture decisions and
make it easier for Sellers to get started and complete a differentiated server solution for your customer's
specific workload.
Mainstream SKUs
HPE launched the Mainstream SKU initiative as a market-driven approach to Demand Steering. It is a
simplified portfolio of our top selling options that meet the current and future market trends. HPE has
committed to provide a more predictable and faster experience for these options. Mainstream SKUs enjoy
higher safety stock levels and have higher fulfilment service levels than non-Mainstream SKUs. Mainstream
orders are fulfilled +30% faster than non-Mainstream orders, have fewer shortages and better recovery
dates. This platform has Mainstream SKUs in the options portfolio, and is eligible for the improved
Mainstream experience. Mainstream SKUs are designated with a Mainstream symbol in our configurators.
Mainstream Configurations
HPE is using the new Smart Templates technology to present Mainstream configurations. All the options in a
Mainstream configuration are pre-selected Mainstream SKUs to optimize the performance, predictability and
fulfilment experience. Check the Template section in our configurators for eligible Mainstream
configurations.
European Union Erp Lot 9 Regulation
Beginning on January 1st, 2024, units sold into the European Union (EU), European Economic Area (EEA),
the United Kingdom, or Switzerland must include more efficient AC power supplies: 94% for multi-output and
96% for single-output. HPE Flexible Slot power supplies are single-output, and part numbers 865438-B21,
P03178-B21, and P44712-B21 are 96% efficient, thus meeting requirements.
HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in
advance to satisfy requests with the current power supplies by the set deadline.
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved
configurator. Contact your local sales representative for information on configurable product offerings and
requirements.
Factory Integrated Models must start with a CTO Server.

FIO indicates that this option is only available as a factory installable option.
All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of
initial hard drives ordered with the server
Some options may not be integrated at the factory. Contact your local sales representative for additional
information.
Step 1: Base Configuration (choose one of the following configurable models)

CTO Server HPE ProLiant DL365 Gen11 8SFF Configure-to-order Server
SKU Number P53933-B21
Processor Not included as standard
DIMM Slots 24-DIMM slots*
Storage Controller Choice of HPE OCP or PCIe plug-in controller
PCIe 1 PCIe x16 Primary Riser
Drive Cage -
8 SFF (Backplane is not included)
included
Network Controller Choice of OCP and stand up card
Fans Not included as standard**
Management Default: HPE iLO Standard with Intelligent Provisioning, HPE OneView Standard
(requires download), HPE GreenLake for Compute Ops Management (subscription
included)
USB Front:: 1x USB 3.2 Gen1 + 1x iLO service port
Rear: 2x USB 3.2 Gen1
Internal: 2x USB 3.2 Gen1
CTO Server HPE ProLiant DL365 Gen11 EDSFF Configure-to-order Server
PCIe 1 PCIe x16 Primary Riser
Drive Cage -
20 EDSFF
included
included)
USB Front: 1x USB 3.2 Gen1 + 1x iLO service port
CTO Server HPE ProLiant DL365 Gen11 GPU Configure-to-order Server
PCIe 1 PCIe x16 Primary Riser and 1 GPU Riser (GPU Riser located in front chassis)
Drive Cage -
20 EDSFF
included
included)
USB Front: 1x USB 3.2 Gen1 + 1x iLO service port
Notes:
− *24 DIMM slots require selection of 2 processors
− ** Fans should be selected separately depending on the configuration
− HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal
Government customers. These products are either manufactured or substantially transformed in a
designated country. TAA compliance is only provided when HPE options are included as part of factory

integrated orders (CTO).
− If EDSFF CTO model is selected, then 2 processors must be selected.
− If EDSFF CTO model is selected, then "Performance Heatsink or DLC" and "Performance Fan" must be
selected.
− TAA compliant configuration requires TAA versions of the CTO Server SKUs.
− All CTO servers are Energy Star 3.0 compliant.
CTO Server 8 SFF CTO Chassis
Included Drive Cage 8 SFF (backplane not included)
Universal Media Bay Optional
ODD Optional
8 SFF SAS/SATA/NVMe Up to 1 Optional
2 SFF SAS/SATA/NVMe Up to 1 Optional
Rear Drive Cages Not Available
Notes: This applies to CTO configurations, field upgrades may differ depending on field
configuration.
Backplane Types - Compatible Drive Type

SATA SAS NVMe(U.3 Static) NVME (U.3
Dynamic)
8 SFF U.3 Tri-mode BP x x x x
2 SFF U.3 Tri-mode BP x x x x
Notes: U.2 backplanes are supported only as private options. U.2 backplanes do not support static drives,
only the dynamic U.3 drives. U.2 backplanes also do not support SAS/SATA drives.
Step 2: Choose Required Options (only one of the following unless otherwise noted)
Please select one -B21 processor required below.
For second processor, please select the same processor model with -B21 from Core Options - HPE
Processors section.
Notes:
− Mixing of 2 different processor models are NOT allowed. For example: first processor,
select P53696-B21 then for second processor, select P53696-B21 as well.
− Processor kits don't include heat sink and fans.
Step 2a: Choose Processors

Processor Option Kits
AMD EPYC 9124 3.0GHz 16-core 200W Processor for HPE P53702-B21
AMD EPYC 9174F 4.1GHz 16-core 320W Processor for HPE P53698-B21

AMD EPYC 9184X 3.55GHz 16-core 320W Processor for HPE P63491-B21
Notes:
− For processors less than 240W and drive cage type is 8SFF, standard heatsink are required. User is
allowed to change to performance heatsink.
− Standard fan kit is only allowed when processors are less than 240W, drive cage type is 8SFF and drives
configured are less than 8x SAS or SATA drives.
− If Processor wattage is above 240W then Performance Heat Sink and Performance fan kit must be
selected. This rule applies to all CTO servers.
− For 8SFF CTO models, when DLC is not selected: If the processor wattage is greater than or equal to
320W, then maximum 8 quantity of drives can be selected per server.
− For EDSFF CTO model: If the selected processor wattage is greater than or equal to 320W, then
maximum of 12 EDSFF drives can be selected. (Not applicable if DLC Module is selected).
Step 2b: Choose Memory Options
Please select one or more memory from below.
For new Gen11 memory population rule whitepaper and optimal memory performance guidelines, please go
to Server memory population rules for HPE ProLiant Gen11 servers with AMD EPYC 9004 series
processors
For additional information, please see the HPE DDR5 Smart Memory QuickSpecs.
Notes:
− Memory DIMM availability with a server platform is dependent upon completion of certification testing.
− The maximum memory speed is a function of the memory type, memory configuration, and processor
model.
− Memory compatibility may vary or be limited within a specific server family depending upon the specific
configuration being requested. Because each server environment and requirements can vary, memory
compatibility is based not only upon the server family but may also be affected by the amount and type
of additional hardware options installed within a specific server configuration. For this reason, some
HPE memory DIMMs may be qualified for a server model or family and yet occasionally not be
supported with limited configurations within that server family. Please consult with the HPE server
Quickspecs or your HPE representative if you have any questions regarding memory compatibility with a
specific HPE server configuration.
Registered DIMMs (RDIMMs)
HPE 16GB (1x16GB) Single Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart
Memory Kit P50309-B21
HPE 32GB (1x32GB) Single Rank x4 DDR5-4800 CAS-40-39-39 EC8 Registered Smart
HPE 32GB (1x32GB) Dual Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart
HPE 128GB (1x128GB) Quad Rank x4 DDR5-4800 CAS-46-39-39 EC8 Registered 3DS Smart

HPE 256GB (1x256GB) Octal Rank x4 DDR5-4800 CAS-46-39-39 EC8 Registered 3DS Smart
Notes:
− Mixing of x4 & x8 memory is not allowed
− Mixing of Non-3DS and 3DS DIMMs is not allowed
− If 128GB/ 256GB Memory is selected, then Performance Heatsink and 7 Performance Fan
must be selected.
− 256GB DIMM imposes more configuration restrictions due to its high profile thermal
condition. Refer to the HPE configurator tool for detailed instructions
− For more detailed information regarding memory population rules, please visit
https://www.hpe.com/docs/server-memory
Memory Blank Kit

HPE DDR4 DIMM Blank Kit P07818-B21
Notes: DIMM blank kit cannot be selected when 24 DIMMs are ordered
Step 2c: Choose Power Supplies
Select one or two power supplies from below.
Notes: Mixing of 2 different power supplies is NOT allowed.
HPE Flex Slot Power Supplies
HPE 1800W-2200W Flex Slot Titanium Hot Plug Power Supply Kit P44712-B21
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit P38997-B21
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit P17023-B21
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit P03178-B21
Notes:
− Mixing of different Power Supply SKU is not allowed
− 1600W -48VDC PSU requires 1x HPE 1600W DC PSU power lug option kit or HPE 1600W DC PSU Power
Cable Kit
− 1800W-2200W PSU only supports high line voltage (200VAC to 240VAC)
− Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to
determine the right size power supply for your server configuration. The HPE Power Advisor is located
at:http://www.hpe.com/info/poweradvisor.
− HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power Distribution Units
(PDUs). Visit HPE power cords for a full list of optional power cords.
Step 2d: Choose Backplane

If front drives are needed in the server, please select one backplane from list below
HPE ProLiant DL365 Gen11 8SFF Tri-Mode U.3 x1 BC FIO Backplane Kit P55020-B21
Notes:
− x1 U.3 8SFF Drive cage can only support SAS/SATA/NVMe drives
− Configurable up to 1
− OROC and PCIe controllers support this backplane. OROC x1 or PCIe x1 cable kit selection is
needed for controller support
− Mixture of x1 U.3 8SFF and x4 U.3 8SFF backplanes is ALLOWED
Notes:
− x4 U.3 8SFF Drive cage can support SAS/SATA/NVMe drives
− OROC and PCIe controllers support this backplane. OROC x1/x2/x4 or PCIe x1/x4 cable kit is
supportable for controller support

− Mixing of NVMe and SAS/ SATA is NOT allowed in the same drive cage if any Tri-mode
controller is not selected for drive cage
HPE ProLiant DL365 Gen11 2SFF Tri-Mode U.3 x4 BC Balanced Backplane Kit P55025-B21
Notes:
− x4 U.3 2SFF Drive cage can support SAS/SATA/NVMe drives
− OROC and PCIe controllers support this backplane. OROC x1/x2/x4 or PCIe x1/x4 cable kit is
supportable for controller support
Notes:
− Supported with GPU CTO model only
− Min/Max = 1 of this drive cage must be selected for GPU CTO model
− Supports NVMe drives only. SAS/SATA drives are not supported
− If this drive cage is selected, then internal controllers cannont be selected. Will be direct
attached to motherboard
HPE ProLiant DL365 Gen11 8EDSFF NVMe FIO Backplane Kit P63215-B21
Notes:
− Supported with GPU CTO model only
− Min/Max = 1 of this drive cage must be selected for GPU CTO model
− If this drive cage is selected, then internal controllers cannont be selected. Will be direct
attached to motherboard
Step 3: Choose Additional Factory Integratable Options

One of the following from each list may be selected if desired at time of factory integration
HPE ProLiant DL365 Gen11 NVMe FIO Trigger Kit P58763-B21

Notes:
− This trigger kit provides support for 10 SFF NVMe direct attach
− This trigger kit will select 8SFF x4 and 2SFF x4 drive cages
− NVMe drives need to be selected separately
HPE Security Options

HPE Trusted Supply Chain for HPE ProLiant P36394-B21
HPE Trusted Supply Chain E-LTU R6X85AAE
Notes:
− Intrusion Cable Kit (P48922-B21) must be selected with then Trusted Supply Chain Config
− If Trusted Supply Chain section is selected, only one instance of the HPE Trusted Supply Chain
E-LTU software option is required per order (not per server)
System Insight Display Options
HPE ProLiant DL365 Gen11 SFF System Insight Display Module Kit P56924-B21
Notes: Only quantity of one can be supported.
Step 4: Choose additional options for Factory Integration from Core and Additional Options
sections below

Core Options
Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett
Packard Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your
local sales representative for additional information.
Software as a Service Management
HPE GreenLake for Compute Ops Management
Base SKU
HPE GreenLake for Compute Ops Management Enhanced 3-year Upfront ProLiant SaaS R7A11AAE
Upgrade SKUS
HPE OneView
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU E5Y35AAE
HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU P8B26AAE
Notes: For customers purchasing HPE GreenLake for Compute Ops Management, without a hardware
purchase or a BTO purchase, use this base SKU within ASQ order:
HPE GreenLake for Compute Ops Management Base SaaS R6Z73AAE
For more information, visit the HPE GreenLake for Compute Ops Management QuickSpecs:
https://www.hpe.com/psnow/doc/a50004263enw
Supported Servers - CTO only. No OEM. - Complete list can be found here: Latest Supported Server List:
https://www.hpe.com/info/com-supported-servers
HPE Unique Options

Riser Kits
The CTO or BTO server has 1x Primary riser by default. Here are the additional risers available to select
HPE ProLiant DL3X5 Gen11 1U x16 Low Profile Secondary Riser Kit P55029-B21
HPE ProLiant DL3X5 Gen11 1U x16 Riser Kit P56915-B21
Notes:
− Both riser kits are in the secondary slot.
− Low Profile Secondary riser kit (P55029-B21) must be selected when HPE NS204i-u Gen11
NVMe boot device (P48183-B21) in the order.
Riser Support Matrix

Primar Second Description Riser position Bus width (Gen5 Remark
y Riser ary (number lanes)
Part Riser denotes number
Numb Part of slots present)
er Numbe Prima Second Prima Second
r ry ary ry ary
Default N/A This is the default 1 0 X16 0 This scenario is valid for
riser riser in the 8SFF CTO Svr
chassis.
Default Default These are the 1 1 X16 X16 This scenario is valid for
riser riser default risers in EDSFF & GPU CTO Svrs
the chassis.
Default P56915- Default riser + 1 1 X16 X16
riser B21 HPE ProLiant
DL3X5 Gen11 1U
x16 Riser Kit
Default P55029- Default riser + 1 1 X16 X16 This scenario is when HPE

Core Options
riser B21 HPE ProLiant NS204i-u Gen11 NVMe
DL3X5 Gen11 1U boot device (P48183-B21)
x16 Low Profile is configured. In this case,
Secondary Riser the secondary slot will be
Kit a Low Profile PCIe slot
Cooling Options
HPE ProLiant DL3X5 Gen11 1U CPU Standard Heat Sink Kit P58456-B21
HPE ProLiant DL3X5 Gen11 1U CPU Performance Heat Sink Kit P58457-B21
HPE ProLiant DL3X5 Gen11 Direct Liquid Cooling Cold Plate Module FIO Kit From Boot Device P62032-B21
HPE ProLiant DL3X5 Gen11 Direct Liquid Cooling Cold Plate Module FIO Kit From PCIe P62035-B21
HPE ProLiant DL3XX Gen11 Direct Liquid Cooling 55cm Quick Disconnect Tube Set FIO Kit P62042-B21
HPE ProLiant Direct Liquid Cooling 450mm Female-Male Connection Quick Disconnect Tube Set P62046-B21
FIO Kit
Notes:
− Mixing of both Standard and Performance Heatsink is not allowed
− If any of "U.3 x4 drive cage" is selected, "Performance Heatsink or DLC Module" and 7
Performance Fans must be selected
− For processors less than 240W with 8x SAS/SATA drives configured, standard heat sink
(P58456-B21) and standard fan kit(P58461-B21) are required
− For processors less than 240W with 10x SAS/SATA or NVMe drives configured, standard heat
sink (P58456-B21) and performance fan kit(P58462-B21) are required
− For processors above 240W, performance heat sink kit (P58457-B21) and performance fan kit
(P58462-B21), or DLC module and performance fan kit are required
− If "PCIe DLC Module" is selected, then Maximum limit for PCIe card limit will be reduced from 2
to 1 per server. (DLC PCIe Module occupies Slot# 2)
− If DLC Module is selected, then quantity 2 of Processor and 1 of Secondary LP module must be
selected.
− For EDSFF CTO model, if selected processor wattage is greater than or equal to 320W, then
DLC module must be selected
− Max of 1 tube set can be selected
− If DLC Module is selected, then tube set must be selected and vice versa.
− 55cm Quick Disconnect Tube Set supported with 8SFF/EDSFF CTO model only
− 450mm(45cm) Quick Disconnect Tube Set supported with GPU CTO model only
HPE ProLiant DL3XX Gen11 1U Standard Fan Kit P58461-B21
HPE ProLiant DL3XX Gen11 1U Performance Fan Kit P58462-B21

Core Options
Notes:
− Gen11 Fan Kits contain only 1 fan
− 1-socket config 5 Standard Fan kits, 2-socket config needs 7 Standard Fan kits
− 1-socket config 5 Performance Fan kits, 2-socket config needs 7 Performance Fan kits
Cooling options summary

CPU cTDP =< 240W =< 240W >240W
(8x SAS/SATA (10x SAS/SATA or =>1 NVMe
drives) drives)
Heatsink Standard 1U H/S Standard 1U H/S Performance 1U H/S
Fans Standard Fans Performance Fans Performance Fans
HPE Boot Controllers

HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device P48183-B21
HPE ProLiant DL3X5 Gen11 NS204i-u NVMe Hot Plug Boot Device Cable Kit P57013-B21
Notes:
− NS204i-u is the HPE Gen11 Hot Pluggable M.2 NVMe RAIDed Boot Device
− HPE DL3X5 Gen11 NS204i-u NVMe Boot Cable Kit is required when the NS204i-u boot device is configured
along with the 4LFF rear cage
− If NS204i-u Gen11 is selected, then 7 quantities of fan must be selected
If NS204i-u Gen11 is selected and secondary riser is required, HPE DL3X5 Gen11 1U x16 LP Sec Riser Kit
must be selected
HPE Optical Drives and Option Kit
HPE 9.5mm SATA DVD-ROM Optical Drive 726536-B21
HPE 9.5mm SATA DVD-RW Optical Drive 726537-B21
HPE Mobile USB DVD-RW Optical Drive 701498-B21
HPE ProLiant DL365 Gen11 2SFF Display Port ODD Blank Kit P56899-B21
Notes:
− Maxmium 1 Optical Drive is supported
− ODD needs selection of a HPE DL365 Gen11 2SFF DP ODD Blank Kit
HPE RAID Controllers

Core Options
Notes:
− When selecting SR RAID controllers for external storage (E208e, 804398-B21) and MR RAID
controllers for internal storage (MR216i/MR416i/MR408i) in the order, please be aware
these two products use different RAID configuration tools.
− Not supporting mixing of MR (MegaRAID) series internal controllers and SR (SmartRAID)
series internal controllers
− MR (MegaRAID) series controllers are not supported with Intelligent Provisioning feature
− For more information on the HPE Gen11 Storage Controller, please refer to:
HPE Compute MR Gen11 Controllers Quick Specs
HPE Compute SR Gen11 Controllers Quick Specs
Essential RAID Controllers

HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in
Controller 804398-B21
Notes:
− This controller supports up to 8 SAS/SATA Drives (external)
− For E208e-p Controller:
ο Controller Based Encryption (CBE) with a remote key management server is not
supported. Local key management (LKM) is supported
ο One Button Secure Erase (OBSE) used to sanitize drives and factory reset the
controller is not supported
− For more information on the HPE Smart Array E208i-p SR Gen10 Controller, please refer to
the QuickSpecs
Tri-mode RAID Controllers
HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller P47789-B21

Core Options
Notes:
− This is an OROC type controller which takes up an OCP slot
− This controller supports up to 16 SAS/SATA/NVMe Drives (Only 4 x4 NVMe drives can be
supported; 8 x2 NVMe drives can be supported)
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller P58335-B21
Notes:
HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller P47781-B21
Notes:
HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller P47785-B21
Notes:
− This is an PCIe type controller which takes up a PCIe slot
HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage Controller P47777-B21
Notes:
HPE SR932i-p Gen11 x32 Lanes 8GB Wide Cache PCI SPDM Plug-in Storage Controller P47184-B21
Notes:

Controller Battery Cable Kits
HPE Smart Storage Hybrid Capacitor with 260mm Cable Kit P02381-B21
HPE 96W Smart Storage Lithium-ion Battery with 260mm Cable Kit P01367-B21
HPE ProLiant DL3X5 Gen11 Smart Storage Battery 2P 96W Cable Kit P57884-B21
Notes:
− The two 260mm battery cable kit can't be selected together.
− The Extension cable kit is required for either the selection of Hybrid Capacitor or 96W Smart
Storage Battery
HPE Drives
Enterprise - 12G SAS - SFF Drives
HPE 300GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD P28028-B21
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD P28352-B21
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD P28586-B21

Core Options
HPE 1.8TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD P53562-B21
Midline - 12G SAS - SFF Drives
HPE 2TB SAS 12G Business Critical 7.2K SFF BC 1-year Warranty 512e HDD P28505-B21
HPE 1TB SAS 12G Business Critical 7.2K SFF BC 1-year Warranty HDD P53563-B21
Midline - 6G SATA - SFF Drives
HPE 1TB SATA 6G Business Critical 7.2K SFF BC 1-year Warranty HDD P28610-B21
HPE 2TB SATA 6G Business Critical 7.2K SFF BC 1-year Warranty 512e HDD P28500-B21
SED (Self-Encryption Drive)
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Self-encrypting FIPS P28618-B21
HDD
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Self-encrypting FIPS HDD P28622-B21
Notes:
− Requirements for MR Tri-mode controller SED support
ο TPM is not required for Local Key Management as key is stored in controller
ο iLO Advanced is reqsuired for Remote Key Management. Key is stored in remote key
manager}
(Ex. ESKM)
SSD Selection
Read Intensive - 12G SAS - SFF - Solid State Drives
HPE 960GB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD P40506-B21
HPE 1.92TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD P40507-B21
HPE 960GB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49029-B21
HPE 1.92TB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49031-B21
HPE 3.84TB SAS 24G Read Intensive SFF BC Self-encrypting FIPS PM6 SSD P41398-B21
HPE 7.68TB SAS 24G Read Intensive SFF BC Self-encrypting FIPS PM6 SSD P41399-B21
Mixed Use - 12G SAS - SFF - Solid State Drives
HPE 960GB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40510-B21
HPE 1.92TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40511-B21
HPE 3.84TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40512-B21
HPE 800GB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49047-B21
HPE 800GB SAS 24G Mixed Use SFF BC Self-encrypting FIPS PM6 SSD P41400-B21
HPE 1.6TB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49049-B21
HPE 1.6TB SAS 24G Mixed Use SFF BC Self-encrypting FIPS PM6 SSD P41401-B21
Mixed Use - 6G SATA - SFF - Solid State Drives

Core Options
HPE 480GB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40502-B21
HPE 960GB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40503-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40504-B21
HPE 3.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40505-B21
HPE 480GB SATA 6G Mixed Use SFF BC PM897 SSD P44011-B21
HPE 960GB SATA 6G Mixed Use SFF BC PM897 SSD P44012-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC PM897 SSD P44013-B21
HPE 960GB SATA 6G Mixed Use SFF BC Self-encrypting 5400M SSD P58244-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC Self-encrypting 5400M SSD P58248-B21
Read Intensive - 6G SATA - SFF - Solid State Drives
HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40496-B21
HPE 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40499-B21
HPE 480GB SATA 6G Read Intensive SFF BC PM893 SSD P44007-B21
HPE 960GB SATA 6G Read Intensive SFF BC PM893 SSD P44008-B21
HPE 1.92TB SATA 6G Read Intensive SFF BC PM893 SSD P44009-B21
HPE 3.84TB SATA 6G Read Intensive SFF BC PM893 SSD P44010-B21
HPE 480GB SATA 6G Read Intensive SFF BC Self-encrypting 5400P SSD P58236-B21
HPE 1.92TB SATA 6G Read Intensive SFF BC Self-encrypting 5400P SSD P58240-B21
Very Read-Optimized - SATA - SFF - Solid State Drives
HPE 7.68TB SATA 6G Very Read Optimized SFF BC 5400 SSD P58228-B21
Read Intensive - NVMe - SFF - Solid State Drives
HPE 1.92TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PM1733a SSD P50216-B21
HPE 1.92TB NVMe Gen4 High Performance Read Intensive SFF BC Self-encrypting FIPS U.3
CM6 SSD P41402-B21
HPE 3.84TB NVMe Gen4 High Performance Read Intensive SFF BC Self-encrypting FIPS U.3
CM6 SSD P41403-B21
HPE 960GB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi P64842-B21
Vendor SSD
HPE 1.92TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi P64844-B21
Vendor SSD
Vendor SSD
Vendor SSD
HPE 960GB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static Multi
Vendor SSD P47844-B21
HPE 1.9TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static Multi

Core Options
Mixed Use - NVMe - SFF - Solid State Drives
HPE 1.6TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD P50227-B21
HPE 1.6TB NVMe Gen4 High Performance Mixed Use SFF BC Self-encrypting FIPS U.3 CM6
SSD P41404-B21
HPE 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC Self-encrypting FIPS U.3 CM6
SSD P41405-B21
HPE 800GB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static V2 Multi P64999-B21
Vendor SSD
HPE 1.6TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static V2 Multi P65007-B21
Vendor SSD
Vendor SSD
Vendor SSD
HPE 800GB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static Multi Vendor
SSD P47837-B21
HPE 1.6TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static Multi Vendor
SSD P47838-B21
SSD P47839-B21
SSD P47840-B21
NVMe Mainstream Performance Read Intensive EDSFF E3.S SSDs
HPE 1.92TB NVMe Gen5 Mainstream Performance Read Intensive E3S EC1 EDSFF CD7 SSD P56585-B21
HPE 3.84TB NVMe Gen5 High Performance Read Intensive E3S EC1 EDSFF SPDM CM7 SSD P61179-B21
HPE 7.68TB NVMe Gen5 High Performance Read Intensive E3S EC1 EDSFF SPDM CM7 SSD P61183-B21
HPE 15.36TB NVMe Gen5 High Performance Read Intensive E3S EC1 EDSFF SPDM CM7 P61187-B21
SSD
NVMe High Performance Read Intensive EDSFF E3.S SSDs
HPE 3.84TB NVMe Gen5 High Performance Read Intensive E3S EC1 EDSFF SPDM PM1743 P57799-B21
SSD
SSD
SSD
NVMe Mainstream Performance Mixed Use EDSFF E3.S SSDs
HPE 3.2TB NVMe Gen5 High Performance Mixed Use E3S EC1 EDSFF SPDM CM7 SSD P61191-B21
HPE 6.4TB NVMe Gen5 High Performance Mixed Use E3S EC1 EDSFF SPDM CM7 SSD P61195-B21
HPE Computation and Graphics Accelerator and related option kits

NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE R8T26C
HPE ProLiant DL365 Gen11 CPU 8-pin GPU Power Cable Kit P56919-B21
Notes:

Core Options
− Supported with GPU CTO model only.
− If more than one quantity of Graphics option is selected, then partnumber must be same.
Different Graphics option cannot be mixed within the server.
− If Graphics Option is selected, then "HPE DL365 Gen11 CPU 8p GPU Pwr Cbl Kit" must be
selected per Graphics Option and vice versa.
HPE Tape Backup
For the complete range of tape drives, autoloaders, libraries and media see:
https://www.hpe.com/us/en/storage/storeever-tape-storage.html.
For hardware and software compatibility of Hewlett Packard Enterprise tape backup products
http://www.hpe.com/storage/BURAcompatibility
HPE Storage Options

Emulex Fibre Channel HBAs
HPE SN1610E 32Gb 1-port Fibre Channel Host Bus Adapter R2J62A
HPE SN1610E 32Gb 2-port Fibre Channel Host Bus Adapter R2J63A
HPE SN1700E 64Gb 1-port Fibre Channel Host Bus Adapter R7N77A
HPE SN1700E 64Gb 2-port Fibre Channel Host Bus Adapter R7N78A
QLogic Fibre Channel HBAs
HPE SN1610Q 32Gb 1-port Fibre Channel Host Bus Adapter R2E08A
HPE SN1610Q 32Gb 2-port Fibre Channel Host Bus Adapter R2E09A
HPE Networking
1 Gigabit Ethernet adapters
Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter for HPE P21106-B21
Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter for HPE P51178-B21
10 Gigabit Ethernet adapters
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T Adapter for HPE P26253-B21
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ Adapter for HPE P26259-B21
10/25 Gigabit Ethernet adapters
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P26262-B21
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE P26264-B21
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P08443-B21
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P42044-B21
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE P08458-B21
Xilinx X2522-25G-PLUS Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P21109-B21
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE P25960-B21
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter for HPE P21112-B21
Mellanox MCX623105AS-VDAT Ethernet 200Gb 1-port QSFP56 Adapter for HPE P10180-B21
Notes:
− Almost all PCIe Networking Cards need 7x Performance Fans. Refer to OCA configurator for
exceptions and details
− Ambient temperature for above cards (P08458-B21, P25960-B21, P21112-B21, P10180-B21)
is 25C under configuration of 8SFF SAS/SATA/NVMe/SAS4, with AOC (Active Optical

Core Options
Cables)
− Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-
optic environments must be purchased separately. Please see the related NIC QuickSpecs
for Technical Specifications and additional information:
https://h20195.www2.hpe.com/v2/getpdf.aspx/A00002507ENW.pdf
OCP Adapter
1 Gigabit Ethernet OCP adapters
Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P08449-B21
Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P51181-B21
10 Gigabit Ethernet OCP Adapters

Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE P26256-B21
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3 Adapter for HPE P10097-B21
10/25 Gigabit Ethernet OCP adapters
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P10115-B21
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE P26269-B21
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P10106-B21
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P42041-B21
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter for HPE P22767-B21
Notes:
− Almost all PCIe Networking Cards need 7x Performance Fans. Refer to OCA configurator
for exceptions and details
− P22767-B21 and P26269-B21 needs selection of an OCP upgrade cable kit
− Ambient temperature for above cards (P26269-B21) is 25C under configuration of 8SFF
SAS/SATA/NVMe/SAS4, with AOC (Active Optical Cables)
− P22767-B21 not allowed to select under configuration of 8SFF SAS/SATA/NVMe/SAS4,
with AOC (Active Optical Cables)
− Ambient temperature for above cards (P22767-B21) is 25C under configuration of 8SFF
SAS/SATA/NVMe/SAS4, with Direct Attach Cable (DAC)
HPE InfiniBand
HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT
Adapter P23665-B21
HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe4 x16 MCX653106A-ECAT
Adapter P23666-B21
HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 MCX653105A-HDAT
Adapter P23664-B21
HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 MCX653106A-HDAT
Adapter P31324-B21
HPE InfiniBand NDR 1-port OSFP PCIe5 x16 MCX75310AAS-NEAT Adapter P45641-B21
HPE InfiniBand NDR200 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter P45642-B21
HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 OCP3 MCX653435A-HDAI
Adapter P31323-B21
HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 OCP3 MCX653436A-HDAI
Adapter P31348-B21
Notes:

Core Options
− All InfiniBand options require 6 performance fan kit
− For InfiniBand OCP options, OCP upgrade kit is needed
− Ambient temperature for above cards (P23666-B21, P23664-B21, P45641-B21, P45642-
B21, P31323-B21) is 25C under configuration of 8SFF SAS/SATA/NVMe/SAS4, with
AOC (Active Optical Cables)
− P31324-B21 and P31348-B21 are not allowed to select under configuration of 8SFF
SAS/SATA/NVMe/SAS4, with AOC (Active Optical Cables)
− Ambient temperature for above cards (P31324-B21 and P31348-B21) is 25C under
configuration of 8SFF SAS/SATA/NVMe/SAS4, with Direct Attach Cable (DAC)
− For more information, please visit: HPE InfiniBand Options for HPE ProLiant and Apollo
Servers
HPE ProLiant DL3X5 Gen11 x16 OCP1 1P Upgrade Cable Kit P57882-B21
Notes: This cable kit cannot be selected when 2 processors are configured. When this kit is
selected, max of 1 OCP card can be selected per server
HPE ProLiant DL3X5 Gen11 x16 OCP1 OCP2 2P Upgrade Cable Kit P57849-B21
Notes: This cable kit needs 2 processors configured
HPE Power Supplies

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows
for hot plug, tool-less installation into HPE ProLiant Gen11 Servers. Flex Slot power supplies are certified
for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power
supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy
costs, and avoid "trapped" power capacity in the data center.
Notes:
− Prior to making a power supply selection it is highly recommended that the HPE Power
Advisor is run to determine the right size power supply for your server configuration.
The HPE Power Advisor is located at:
https://poweradvisorext.it.hpe.com/?Page=Index
− HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). Visit HPE Power Cords and Cables for a full list of
optional power cords.
Notes: Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and
include a C-14 power inlet connector that can support HPE Power Discovery Services (blue
connector).
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit P17023-B21
Notes:
− Flex Slot universal power supplies support power efficiency of up to 94% and support
both 277VAC/380VDC power inputs.
− HPE 1600W DC PSU Power Lug Option Kit (P36877-B21) must be selected along with
this power supplies.
Notes:
− Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and include
a C-14 power inlet connector that can support HPE Power Discovery Services (blue
connector).
− The power supply selected only supports high line voltage (200VAC to 240VAC)
HPE 1800W-2200W Flex Slot Titanium Hot Plug Power Supply Kit P44712-B21
Notes:
− Flex Slot Titanium power supplies support power efficiency of up to 96% and include a C-

Core Options
14 power inlet connector that can support HPE Power Discovery Services (blue
connector).
− The power supply selected only supports high line voltage (200VAC to 240VAC)
HPE 1600W -48VDC Power Cable Lug Kit P36877-B21

Notes: Must be selected along with HPE 1600W Flex Slot -48VDC Hot Plug Power Supply
Kit (P17023-B21)

Additional Options
Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett
Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for additional information.
Embedded Management
HPE iLO Advanced
HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features E6U59ABE
HPE iLO Advanced Electronic License with 3yr Support on iLO Licensed Features E6U64ABE
HPE iLO Advanced 1-server License with 3yr Support on iLO Licensed Features BD505A
HPE iLO Advanced Flexible Quantity License with 3yr Support on iLO Licensed Features BD506A
HPE iLO Advanced AKA Tracking License with 3yr Support on iLO Licensed Features BD507A
HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features 512485-B21
HPE iLO Advanced Flexible Quantity License with 1yr Support on iLO Licensed Features 512486-B21
HPE iLO Advanced AKA Tracking License with 1yr Support on iLO Licensed Features 512487-B21
HPE Converged Infrastructure Management Software

HPE OneView Standard 1yr 9x5 Support Flexible Quantity E-RTU K6F98AAE
HPE OneView w/o iLO including 3yr 24x7 Support 1-server LTU P8B24A
HPE OneView w/o iLO including 3yr 24x7 Support Track 1-server LTU P8B25A
HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU P8B26AAE
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU E5Y35AAE
HPE OneView Upgrade from Insight Management 3yr 24x7 Support 1-server LTU F6Q91A
HPE OneView including 3yr 24x7 Support Physical 1-server LTU E5Y34A
HPE OneView including 3yr 24x7 Support Track 1-server LTU E5Y36A
HPE OneView for ProLiant DL Server including 3yr 24x7 Support Bundle Track 1-server
LTU E5Y44A
HPE OneView Upgrade from Insight Management including 3yr 24x7 Support Flexible
Quantity E-LTU E5Y45AAE
Notes: Licenses ship without media. The HPE OneView Media Kit can be ordered separately or can be
downloaded.
HPE Security
HPE Bezel Lock Kit 875519-B21
HPE ProLiant DL3XX Gen11 Intrusion Cable Kit P48922-B21
HPE ProLiant Gen11 1U Common Bezel Kit P50450-B21
Cable Kits
HPE ProLiant DL365 Gen11 XGMI Interconnection Cable Kit P63125-B21
Notes:
− Max q'ty 1 can be selected per system

− If selected, then 2 processors must be selected
− Supported with 8SFF CTO model only
HPE ProLiant DL365 Gen11 8SFF OROC x1 SAS/SATA/NVMe Cable Kit P56901-B21

Additional Options
Notes:

− This cable kit supports the HPE DL365 G11 8SFF TM U.3 x1 FIO Backplane Kit and an OROC
storage controller
HPE ProLiant DL365 Gen11 8SFF x1 SAS/SATA/NVMe PCIe Cable Kit P56903-B21
Notes:

− This cable kit supports the HPE DL365 G11 8SFF TM U.3 x1 FIO Backplane Kit and an PCIe
storage controller
HPE ProLiant DL365 Gen11 2SFF OROC x1 SAS/SATA Cable Kit P56905-B21
Notes:

− This cable kit supports below backplane kits:
− HPE DL365 G11 2SFF TM U.3 x4 Bal BP Kit
HPE ProLiant DL365 Gen11 2SFF x1 SAS/SATA PCIe Cable Kit P56907-B21
Notes:

HPE ProLiant DL365 Gen11 2SFF SATA Direct Attach Cable Kit P56909-B21
Notes:

− This cable kit only supports the HPE DL365 G11 2SFF TM U.3 x4 Bal Backplane Kit
HPE ProLiant DL365 Gen11 8SFF x4 Tri-Mode PCIe Cable Kit P56911-B21
Notes:

HPE ProLiant DL365 Gen11 8SFF OROC Tri-Mode Splitter Cable Kit P56913-B21
Notes:

− This cable kit supports connection with a 8SFF Tri-mode U.3 x4 backplane and an OROC
controller
HPE ProLiant DL365 Gen11 8SFF NVMe Direct Attach Balanced Cable Kit P56917-B21
HPE ProLiant DL365 Gen11 2SFF NVMe Direct Attach Balanced Cable Kit P56918-B21
Notes: The 8SFF and 2SFF NVMe Direct Attach Balance Cable kits support direct attach for the
NVMe drives on the 8SFF and 2SFF TM backplanes
HPE ProLiant DL36X Gen11 Rear Serial Port Cable Kit P59431-B21
HPE Rail Kits

Notes:

Additional Options
− Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number of people to use for
any installation.
− CTO Models do not ship with rail kits, they need to be ordered seperately
HPE DL3XX Gen11 Easy Install Rail 2 Kit P52351-B21
Notes: Supported on both SFF and LFF Models
HPE ProLiant DL300 Gen10 Plus 1U Cable Management Arm for Rail Kit P26489-B21
Notes: Supportable when rail kit is selected
HPE Racks
Please see the HPE Advanced Series Racks QuickSpecs for information on additional racks options and
rack specifications.
Please see the HPE Enterprise Series Racks QuickSpecs for information on additional racks options
and rack specifications.
HPE Power Distribution Units (PDUs)

Please see the HPE Basic Power Distribution Units (PDU) QuickSpecs for information on these
products and their specifications.
Please see the HPE Metered Power Distribution Units (PDU) QuickSpecs for information on these
products and their specifications. Please see the HPE Intelligent Power Distribution Unit (PDU)
QuickSpecs for information on these products and their specifications.
Please see the HPE Metered and Switched Power Distribution Units (PDU) QuickSpecs for
information on these products and their specifications.
HPE Uninterruptible Power Systems (UPS)

To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
Please see the HPE DirectFlow Three Phase Uninterruptible Power System QuickSpecs for
information on these products and their specifications.
Please see the HPE Line Interactive Single Phase UPS QuickSpecs for information on these products
and their specifications.
HPE Disk-Based Backup

HPE RDX External Docking Station C8S07B
HPE RDX 500GB Removable Disk Cartridge Q2042A
HPE RDX 1TB Removable Disk Cartridge Q2044A
HPE Support Services Installation & Start-up Services

Installation Services
HPE Proliant DL/ML Install Service U4554E
HPE Proliant DL/ML Startup Service U4555E

Additional Options
Tech Care
HPE 3 Year Tech Care Essential DL365 GEN11 Service H79C4E
HPE 3 Year Tech Care Essential wDMR DL365 GEN11 Service H79C5E
HPE 5 Year Tech Care Essential DL365 GEN11 Service H79E8E
HPE 5 Year Tech Care Essential wDMR DL365 GEN11 Service H79E9E
Notes: For a full listing of support services available for this server, please visit
http://www.hpe.com/services.

Memory
Memory Population guidelines

CPU 1 CPU 0
Front side of the server
General Memory Population Rules and Guidelines

Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two-processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all
installed processors.
When two processors are installed, balance the DIMMs across the two processors.
The maximum memory speed is a function of the memory type, memory configuration, and processor
model.
The maximum memory capacity is a function of the number of DIMM slots on the platform, the largest
DIMM capacity qualified on the platform, the number and model of installed processors qualified on
the platform.
To realize the performance memory capabilities listed in this document, HPE DDR5 Smart Memory is
required. For additional information, please see the: HPE DDR5 Smart Memory QuickSpecs
For General Server Memory and Persistent Memory Population Rules and Guidelines, see details
here:
http://www.hpe.com/docs/memory-population-rules
For details on the HPE Server Memory speed, visit: Server memory population rules for HPE
ProLiant Gen11 servers with AMD EPYC 9004 series processors

Technical Specifications
System Unit
Dimensions (Height x Width x Depth)
4.29 X 44.89 X 64.94 cm
1.69 X 17.67 X 25.57 in
Packaging
91.6 X 60 X 24.2 cm
36.06 X 23.63 X 9.53 in
Weight (approximate)
12.70 kg
27.94 lb
− SFF Minimum: 8 SFF chassis with 8 HDD blanks, 2x Drive Bay blanks, 1x processor including
standard heat sink, 2x DIMMs, 1x power supply (plus blank), 1x Smart Array, 1x Riser installed,
cables for the above)
ο 12.70 kg
ο 27.94 lb
Packaged weight
ο 24.36 kg
ο 53.7 lb
− SFF Maximum: 10x SFF hard drives, 2x processors, 2 heat sinks, 2x power supplies, 1x Smart
Array, 2x Risers installed, 16x DIMMs, 2x power supply, cables for the above
ο 18.39 kg
ο 40.46 lb
Packaged weight
ο 29.36 kg
ο 64.73 lb
Input Requirements (per power supply)

Rated Line Voltage
100 to 120 VAC
200 to 240 VAC
BTU Rating
Maximum
For 1600W Power Supply: 5918 BTU/hr (at 200 VAC), 5884 BTU/hr (at 240 VAC) for China
For 800W Power Supply: 3207 BTU/hr (at 100 VAC), 3071 BTU/hr (at 200 VAC), 3112 BTU/hr (at 240
VAC) for China Only
For 500W Power Supply: 1979 BTU/hr (at 100 VAC), 1911 BTU/hr (at 200 VAC), 1965 BTU/hr (at 240
VAC) for China Only
Power Supply Output (per power supply)

Rated Steady-State Power
− For 1600W Power Supply: 1600W (at 240 VAC), 1600W (at 240 VAC)
− For 800W Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VAC) input for
China only
− For 500W Power Supply: 500W (at 100 VAC), 500W (at 240 VAC), 500W (at 240 VAC) input for
China only

Maximum Peak Power

− For 1600W Power Supply: 1600W (at 200 to 240 1VAC), 1600W (at 240 VAC) input for China only
− For 800W Power Supply: 800W (at 100 to 127 VAC), 800W (at 200 to 240 1VAC), 800W (at 240
VAC) input for China only
− For 500W Power Supply: 500W (at 100 to 127 VAC), 500W (at 200 to 240 VAC), 500W (at 240
VAC) input for China only
System Inlet Temperature

Standard Operating Temperature
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per
every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The upper limit and rate of change may be limited by
the type and number of options installed.
System performance during standard operating support may be reduced if operating with a fan fault
or above 30°C (86°F).
Extended Ambient Operating Temperature
For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C
(41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every
175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The
approved hardware configurations for this system are listed at the URL:
https://www.hpe.com/support/ASHRAEGen11
For approved hardware configurations, the supported system inlet range is extended to be: 40° to
45°C (104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every
410 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware
configurations for this system are listed at the URL:
https://www.hpe.com/support/ASHRAEGen11
System performance may be reduced if operating in the extended ambient operating range or with a
fan fault.
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity(non-condensing)
Operating
8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum
allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

Emissions Classification (EMC) - Regulatory Information
To view the regulatory information for your product, view the Safety and Compliance Information for Server,
Storage, Power, Networking, and Rack Products, available at the Hewlett Packard Enterprise Support
Center:
http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts
HPE RAID Controllers

For latest information on HPE Gen11 RAID Controllers for HPE ProLiant DL Servers please refer to their
QuickSpecs. .
Environment-friendly Products and Approach - End-of-life Management and Recycling

Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many
geographic areas, for our products. Products returned to Hewlett Packard Enterprise will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly instructions) is posted on
the Hewlett Packard Enterprise web site. These instructions may be used by recyclers and other WEEE
treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett
Packard Enterprise equipment.
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-
Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise
emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO
9296 (ECMA 109). The listed sound levels apply to standard shipping configurations. Additional options may
result in increased sound levels. Please have your HPE representative provide information from the HPE
EMESC website for further technical details regarding the configurations listed below.
Idle
LWAd 4.9 B Base
LpAm 35 dBA Base
Operating
LWAd 5.9 B Base
LpAm 46 dBA Base
Notes:
− Acoustics levels presented here are generated by the test configuration only. Acoustics levels will vary
depending on system configuration. Values are subject to change without notification and are for
reference only.
− Product conformance to cited product specifications is based on sample (type) testing, evaluation, or
assessment. This product or family of products is eligible to bear the appropriate compliance logos and
statements.
− The Listed sound levels apply to standard shipping configurations. Additional options may result in
increased sound levels.

Summary of Changes
Date Version Action Description of Change

History
08-Jan-2024 Version 14 Change Service and Support and Core Optiosn sections were updated.
d (Added a new Riser Support Matrix in the Core Options section.
Added new CM7 EDSFF E3.S 1T drives)
04-Dec-2023 Version 13 Change Service and Support, Configuration Information and Core
d Options sections were updated.
02-Oct-2023 Version 12 Change Core Options section was updated.
d
05-Sep-2023 Version 11 Change Overview, Configuration Information, and Core Options sections
d were updated
07-Aug-2023 Version 10 Change Standard Features, Configuration Information, Core Options and
d Additional Options sections were updated
10-Jul-2023 Version 9 Change Standard Features, Service and Support, Core Options, and
d Technical Specifications sections were updated.
13-Jun-2023 Version 8 Change Standard Features, Service and Support, Pre-Configured
d Models, Configuration Information, Core Options, and Additional
Options sections were updated
01-May-2023 Version 7 Change Standard Features and Core Options sections were updated.
d
03-Apr-2023 Version 6 Change Standard Features, Configuration Information and Technical
d Specifications sections were updated
06-Mar-2023 Version 5 Change Standard Features section was updated.
d
06-Feb-2023 Version 4 Change Overview, Standard Features, Configuration Information,
d additional Options and Technical Specifications sections were
updated.
19-Dec-2022 Version 3 Change Standard Features section was updated.
d
05-Dec-2022 Version 2 Change Standard Features, Configuration Information, Core Options and
d Additional Options sections were updated.
10-Nov-2022 Version 1 New New QuickSpecs

Copyright
Make the right purchase
decision. Contact our
presales specialists.
© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained
herein is subject to change without notice. The only warranties for Hewlett Packard
Enterprise products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.
AMD® and EPYC® are registered trademarks of Advanced Micro Devices Corporation in
the U.S. and other countries.
Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other
countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the
Microsoft group of companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
a50004299enw - 16903 - Worldwide - V14 - 08-January-2024

HPE ProLiant DL365 Gen11

Uploaded by

Copyright:

Available Formats

HPE ProLiant DL365 Gen11

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HPE ProLiant DL365 Gen11

Uploaded by

Copyright:

Available Formats

QuickSpecs HPE ProLiant DL365 Gen11

HPE ProLiant DL365 Gen11

8 SFF Front View - 8 SFF & No Media Option Shown

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 1

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 2

Rear View - Standard for all DL365 Gen11

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 3

Processors Up to 2 of the following depending on model.

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 4

System Management Chipset

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 5

− This kit does not occupy a PCIe slot

HPE Smart Array E208e-p SR Gen10 Controller

− For additional details, please visit:

HPE Compute MR Gen11 Controllers Quick Specs

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 6

Video modes up to 1920 x 1200@60Hz (32 bpp)

HPE iLO 6 on system management memory

Internal Storage Devices

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 7

Operating Systems and Virtualization Software Support for ProLiant Servers

HPE Server UEFI

Secure Boot and Secure Start enable for enhanced security

TPM 2.0 Support

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 8

Industry Standard Compliance

UEFI (Unified Extensible Firmware Interface Forum)

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 9

iLO RESTful API

Active System Health Viewing

iLO Amplifier Pack

Learn more at http://www.hpe.com/servers/iLOamplifierpack.

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 10

HPE OneView Standard

HPE GreenLake for Compute Ops Management

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 11

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 12

HPE OneView Advanced

HPE InfoSight for Servers

Rack and Power Infrastructure

One Config Simple (OCS/SCE)

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 13

Service and Support

HPE Managed Services

HPE Complete Care Service

A complete coverage approach -- edge to cloud

HPE Tech Care Service

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 14

Service and Support

HPE Lifecycle Services

Other Related Services from HPE Services:

Defective Media Retention

Parts and Materials

How to Purchase Services

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 15

Service and Support

Consume IT On Your Terms

DA - 16903 Worldwide QuickSpecs — Version 17 — 1/8/2024 Page 16

Base & Performance Model

Country Code Key