HPE ProLiant ML110 Gen11-A00054055enw

QuickSpecs HPE ProLiant ML110 Gen11
Overview
HPE ProLiant ML110 Gen11

Provide enhanced single processor and storage flexibility in a 4.5U 1P tower optimized server with optional rackable chassis,
outstanding compute performance, security, reliability, and expandability at an affordable price. Fill a mid-range of workloads for
small offices, remote and branch offices of large enterprises, growing SMBs and data centers with the power of 4th and 5th Gen
Intel® Xeon® Scalable Processors (up to 32 cores) increased bandwidth with DDR5 and PCIe Gen5. HPE ProLiant ML110 Gen11
server is an excellent choice to accelerate your growing business.
Front View – SFF chassis with optional Gen11 16 SFF and 8LFF Drive Cage Kits with RDX shown (Tower mode)
1. DisplayPort 1.1a 7. Power on/Standby button and system power LED

2. USB 3.2 Gen1 port 8. Optical drive bay
3. iLO service port 9. Media Bay: optional internal USB RDX docking station
4. UID button/LED 10. Box1: 4LFF/NHP or 8SFF SAS/SATA drive cage
5. NIC status LED 11. Box2: Optional 4LFF/NHP or 8SFF SAS/SATA drive cage
6. Health LED
Notes: Image shown without the security front bezel which is standard in every ML110 Gen11 unit.
Page 1
Overview
Rear View – With optional NS204i-u and riser kit shown.

1. HPE NS204i-u Gen11 NVMe Hot Plug Boot Device 8. iLO management port
(Optional)
2. Flexible Slot power supply 1 9. Dual NIC ports (1 GbE)
3. Flexible Slot power supply 2 10. Slot 1 PCIe5 x16
4. Slot 14 OCP 1 (Optional for OROC/NIC OCP adapter) 11. Slot 2 PCIe5 x16 (Optional riser kit required)
5. Serial port (Optional) 12. Slot 3 PCIe5 x16 (Optional riser kit required)
6. VGA Port 13. Slot 4 PCIe5 x16
7. Dual USB 3.2 Gen 1 ports
Page 2
Overview
Internal View – with full memory DIMM populated and optional NS204i-u shown
1. CPU Socket with 16 DDR5 DIMM slots 9. USB 2.0 port
2. M.2 Slot 2 10. Slot 1 PCIe5 x16
3. M.2 Slot 1 11. MCIO port 1 for the riser slot 2
4. x8 SlimSAS port 12. MCIO port 2 for the riser slot 2
5. Megacell battery holder (Under) 13. MCIO port 3 for the riser slot 3
6. HPE NS204i-u NVMe Hot Plug Boot Device (Optional) 14. MCIO port 4 for the riser slot 3
7. Slot 14 OCP 1 (Optional for OROC/NIC) 15. USB 3.2 Gen 1 port
8. Slot 4 PCIe5 x16
Page 3
Overview
What’s New
• Powered by 4th Generation Intel® Xeon® Scalable processors that support up to 32 core at 185W, 60 MB of L3 Cache, and
16 DIMMs for DDR5 memory up to 4800 MT/s.
• Increased memory bandwidth, performance and lower power requirements with DDR5 memory that support up to 1 TB
memory capacity with 8 channels per processor.
• Advanced data transfer rates from the PCIe Gen5 serial expansion bus.
• Includes HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to securely configure,
monitor, and update your HPE ProLiant Gen11 servers seamlessly from anywhere.
• Supports LFF/SFF backplane and hot-pluggable RAID1 protected NS204i-u M.2 NVMe boot option.
• Support NVIDIA L4 24GB PCIe Accelerator
• Support 5th Generation Intel® Xeon® Scalable processors that support up to 28 cores at 185W TDP, 2.1 G.
• Support DDR5 5600 MT/s memory 16, 32, 64, 96GB DIMM modules with 5th Gen Intel® Xeon® Scalable processors.
• New pre-configured SKUs with 5th Generation Intel® Xeon® Scalable processors.
Platform Information
Form Factor
• 4.5U tower with rack conversion capability
Notes: When deployed as a Rack model, this system will take up 5.5U-height space in a standard data center rack facility.
Chassis Types
• 8 SFF chassis with optional SFF drive cage kit, 1 Optical Drive, 1 USB internal RDX docking station supported.
• 4 LFF chassis with optional LFF or SFF drive cage kit, 1 Optical Drive, 1 USB internal RDX docking station supported.
Notes: Mixed SFF and LFF drive cages is supported with LFF chassis, up to 2 drive cages.
System Fans
• Standard – 2 fans included with optional Redundant Fan Kit.
Notes:
When one of the following scenarios occurs, Redundant Fan Kit (P49984-B21) is required.
− Server with the following options installed:
ο SAS 15K RPM SFF HDD.
ο SAS4 SFF SSD.
ο HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device.
ο GPU and accelerators
− Server is required to continue operating with single fan failure. A flashing amber Health LED will indicate this condition.
− Server is required to operate with the A3/A4 extended operating environment with ambient temperature 35°C (95°F) to
45°C (113°F).
Page 4
Standard Features
Processors – One of the following, depending on model.

Notes: For more information regarding Intel Xeon processors, please see the following
https://www.intel.sg/content/www/xa/en/processors/xeon/scalable/xeon-scalable-platform.html.
Intel Xeon® Scalable Processors – Naming Decoder
Processor Suffix Description Offering
P Cloud --- IaaS Processor specifications optimized for IaaS cloud environments such as
orchestration efficiency in high-frequency VM environments.
V Cloud --- SaaS Processors specification optimized for SaaS cloud environments.
M Media Transcode Processor specifications optimized for AI and media processing workloads.
H DB and Analytics Database and Analytics up to 4S and 8S depending on SKU
N Network/5G/Edge(High Network/5G/Edge
TPT/Low Latency) (High TPT /Low Latency) Processor specifications optimized for
communications/networking/NFV (Network Function(s) Virtualization) workloads
and operating environments.
S Storage & HCI Storage-optimized SKU with full accelerators enabled (DSA, QAT, DLB)
T Long-life Use/High Support for up to 10-year reliability and support for higher Tcase. These SKUs are
Tcase often used in operating environments with long-life use requirements and require
Network Equipment Building System (NEBS)---Thermal friendly specification
support.
U 1-Scoket Optimized* Supported in one-socket configurations only.
Q Liquid cooling Lower Tcase SKUs, targeted towards liquid cooling
+ Feature + Feature plus(+) SKU contains 1 of each accelerator enabled (DSA, DLB, QAT, IAA)
Intel Fourth Generation Xeon® Scalable Processors

Intel Xeon Models CPU Cores L3 Cache Power UPI DDR5 SGX Enclave
Frequency (16 GT/s) size
Gold Processors
Gold 6421N Processor* 1.8 GHz 32 60 MB 185W N/A 4400 MT/s 128 GB
Gold 6426Y Processor 2.5 GHz 16 37.5 MB 185W 3 4800 MT/s 128 GB
Gold 5418Y Processor 2.0 GHz 24 45 MB 185W 3 4400 MT/s 128 GB
Gold 5412U Processor* 2.1 GHz 24 45 MB 185W N/A 4400 MT/s 128 GB
Gold 5411N Processor* 1.9 GHz 24 45 MB 165W N/A 4400 MT/s 128 GB
Gold 5418N Processor 1.8 GHz 24 45 MB 165W 3 4000 MT/s 128 GB
Gold 5415+ Processor 2.9 GHz 8 22.5 MB 150W 3 4400 MT/s 128 GB
Gold 5416S Processor 2.0 GHz 16 30 MB 150W 3 4400 MT/s 128 GB
Sliver Processors
Silver 4416+ Processor 2.0 GHz 20 37.5 MB 165W 2 4000 MT/s 64 GB
Silver 4410Y Processor 2.0 GHz 12 30 MB 150W 2 4000 MT/s 64 GB
Bronze Processor
Bronze 3408U Processor* 1.8 GHz 8 22.5 MB 125W N/A 4000 MT/s 64 GB
Intel Fifth Generation Xeon® Scalable Processors

Intel Xeon Models CPU Cores L3 Cache Power UPI DDR5 SGX Enclave
Frequency (16 GT/s) size
Gold Processors
Gold 5512U Processor* 2.1 GHz 28 52.5 MB 185W N/A 4800 MT/s 128 GB
Gold 5515+ Processor 3.2 GHz 8 22.5 MB 165W 3 4800 MT/s 128 GB
Sliver Processors
Silver 4516Y+ Processor 2.2 GHz 24 45 MB 185W 2 4400 MT/s 64 GB
Silver 4514Y Processor 2.0 GHz 16 30 MB 150W 2 4400 MT/s 64 GB
Silver 4510 Processor 2.4 GHz 12 30 MB 150W 2 4400 MT/s 64 GB
Page 5
Standard Features
Silver 4509Y Processor 2.6 GHz 8 22.5 MB 125W 2 4400 MT/s 64 GB

Bronze Processor
Bronze 3508U Processor* 2.1 GHz 8 22.5 MB 125W N/A 4400 MT/s 64 GB
Notes:
− 80 PCIe 5.0 lanes per processor.
− * “U” processors (i.e. 5412U, 3408U, 3508U) and 6421N, 5411N are only supported in single socket configuration.
− Bronz Processors (3408U and 3508U) are supported up to PCIe Gen4.
− Intel VROC NVMe feature is not supported with 4510, 4509Y and 3508U processors.
− DDR5 memory speed is the maximum memory speed supported by the processor. Actual maximum memory speed is a
function of the memory type, memory configuration, and processor model.
Chipset
Intel® C741 Chipset
Notes: For more information regarding Intel® chipsets, please see the following URL:
https://www.intel.com/content/www/us/en/products/chipsets/server-chipsets.html
System Management Chipset

HPE iLO 6 ASIC
Notes: Read and learn more in the iLO QuickSpecs.
Memory
One of the following depending on model
Type HPE DDR5 Smart Memory, Registered (RDIMM)
DIMM Slots Available 16 DIMM slots
16 DIMM slots per processor, 8 channels per processor, 2 DIMM per channel
Maximum capacity 1.5TB
(RDIMM) 16 x 96 GB RDIMM @ 4400MT/s at 2DPC with 5th Gen Intel Processors and DDR5 5600 DIMMs
1.0 TB
16 x 64 GB RDIMM @ 4400MT/s at 2DPC with 4th Gen Intel Processors and DDR5 4800 DIMMs
Notes:
− Actual maximum memory speed is a function of the memory type, memory configuration, and processor model.
− 96GB DDR5-5600 DIMM is not supported with 4510, 4509Y and 3508U processors.
− For additional information, please see the HPE DDR5 Smart Memory QuickSpecs.
− For General Server Memory and Persistent Memory Population Rules and Guidelines for Gen11 see details here:
http://www.hpe.com/docs/memory-population-rules
Memory Protection
Advanced ECC
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single
DRAM chip.
Online Spare
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
Notes: For more information see our Memory RAS feature technical whitepaper.
Page 6
Standard Features
Expansion Slots
Default Slots
Notes:
− Bus width indicates the number of physical electrical lanes running to the connector.
− There are two PCIe Gen5 x16 slots is available by default:
Default Slots
Slots # Processor Technology Bus Width Connector Width Slot Form Factor
1 CPU 1 PCIe 5.0 X16 X16 Full-height, full-length slot
4 CPU 1 PCIe 5.0 X16 X16 Full-height, half-length slot
Optional GPU Riser Kit

Notes:
− Bus width indicates the number of physical electrical lanes running to the connector.
− Double Width expansion card is only supported with slot 2 and results slot 3 space been occupied.
− Two GPU Riser Kit types:
ο HPE ProLiant ML110 Gen11 GPU Riser Kit (P53487-B21) provides Slot 2 as PCIe Gen5 x16 slot included riser cage,
PCA and cables.
ο HPE ProLiant ML110 Gen11 Second GPU Riser Kit (P53488-B21) provides Slot 3 as PCIe Gen5 x16 slot included PCA
and cables only, Thus HPE ProLiant ML110 Gen11 GPU Riser Kit (P53487-B21) is required while Second GPU riser kit
selected.
HPE ProLiant ML110 Gen11 GPU Riser Kit

Slots # Processor Technology Bus Width Connector Slot Form Factor
Width
Internal Storage Devices

• Optical Drive
Available as an option (DVD-ROM or DVD-RW)
• Hard Disk Drive/ Solid State Drive
Available as an option
Storage Controllers
NVMe Boot Devices
• HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device
Software RAID
Notes:
Additional steps are required for OS installation with Intel VROC, please refer to the link Intel Virtual RAID on CPU for
HPE Gen11 User Guide - Installing OS on the Intel VROC RAID
• Intel VROC SATA for HPE ProLiant Gen11

Notes:
− All models feature embedded storage controller that supports SATA RAID with up to 4+4 LFF or 8 SFF drive and
2xM.2 SATA drives. Each LFF drive cages are separated drive groups, SFF drive cage also separates to two drive
groups (Bay1-4 and Bay5-8) and 2x M.2 SATA drives from onboard slots.
Page 7
Standard Features
− When NS204i-u selected, embedded storage controller port will be occupied and no LFF/SFF bay is supported.
− Intel VROC for HPE ProLiant Gen11 is an enterprise, hybrid Software RAID solution specifically designed for
SSDs.
− Intel VROC is a software-based solution utilizing Intel CPU to RAID or HBA direct connected drives.
− RAID Support- 0/1/5/10.
− Windows and Linux OS support.
− Host Tools- Windows GUI/CLI, Linux CLI.
− UEFI Support- HII Utility, OBSE.
− iLO Support- IML, Alert, SNMP, AHS.
− iLO Redfish- Redfish Read .
− Intel VROC SATA for HPE ProLiant Gen11 will operate in UEFI mode only. For legacy support an additional
storage controller will be needed.
− Intel VROC SATA is off by default and must be enabled.
• Intel VROC NVMe for HPE ProLiant Gen11
Notes:
− All models feature two M.2 slots for NVMe connectivity, provides support for up to two M.2 NVMe drives with
onboard slots.
− Intel VROC for HPE ProLiant Gen11 is an enterprise, hybrid Software RAID solution specifically
designed for NVMe SSDs connected directly to the CPU. Intel VROC is a software-based solution
utilizing Intel CPU to RAID or HBA direct connected drives.
− Intel Virtual RAID on CPU Standard for RAID 0/1/10 (S0E37A/S0E38AAE) must be ordered to enable RAID
support.
− Windows, Linux, VMware OS support.
− Host Tools- Windows GUI/CLI, Linux CLI.
− UEFI Support- HII Utility, OBSE.
− Active health monitoring of NVMe M.2 drives requires use of SMART tools.
− Intel VROC NVMe for HPE ProLiant Gen11 will operate in UEFI mode only. For legacy support an additional Tri-
Mode controller will be needed.
− For NVMe SSDs only, no PCIe card support.
− ML110 Gen11 supports up to 2x M.2 NVMe drives on onboard slots with Intel Virtual RAID on CPU Standard for
RAID 0/1/10 (S0E37A/S0E38AAE).
Essential RAID Controllers

• HPE Smart Array E208e-p SR Gen10 Controller
Tri-mode RAID Controllers

• HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller
• HPE MR216i-p Gen11 x16 Lanes without Cache OCP SPDM Storage Controller
• HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller
• HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller
Page 8
Standard Features
Maximum Storage
Drive Capacity Configuration
Hot Plug LFF SAS HDD 160 TB 8 x20 TB
Hot Plug LFF SAS SSD 7.68 TB 8 x960 GB
Hot Plug LFF SATA HDD 160 TB 8 x20 TB
Hot Plug LFF SATA SSD 7.68 TB 8 x960 GB
Hot Plug SFF SAS HDD 38.4 TB 16 x2.4TB
Hot Plug SFF SAS SSD 245.76 TB 16 x15.36 TB
Hot Plug SFF SATA SSD 122.88 TB 16 x7.68 TB
Hot Plug NVMe M.2 SSD 480 GB 2 x480 GB (NS204i-u boot option with RAID1 protected)
SATA/NVMe M.2 SSD (Onboard slot) 960 GB/3.84 TB 2 x480 GB/2 x1.92 TB
Graphics
Integrated Video Standard
• Video modes up to 1920 x 1200@60Hz (32 bpp)
• 16MB Video Memory
HPE iLO 6 on system management memory
• 64 MB Flash
• 8 Gbit DDR 4 with ECC protection
Power Supply
• HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Available in 94%. Power Efficiency
• HPE 1000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
Notes:
− Available in 94% Power Efficiency.
− 200-240VAC power input only.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into HPE ProLiant Gen11 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and
offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with regional specific power cord with tower server. If a different power cord is required, please
check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies
Page 9
Standard Features
Interfaces
Serial Optional, rear
Display Port 1 standard, front
VGA Port 1 VGA Port standard, rear
Network Ports 2 1GbE BCM5720 embedded NIC. Choice of OCP or stand up card
HPE iLO Remote 1 GbE Dedicated, rear
Management Network Port
Front iLO Service Port 1 standard, front
USB 3.2 Gen1 4 standard on all models: 1 front, 2 rear, 1 internal
USB 2.0 1 internal
Operating Systems and Virtualization Software Support

• See HPE Servers Support & Certification Matrices
− Microsoft Windows Server
− VMware ESXi
− Red Hat Enterprise Linux (RHEL)
− SUSE Linux Enterprise Server (SLES)
− Canonical Ubuntu
− Oracle Linux and Oracle VM
− Citrix
Notes: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server.
https://www.hpe.com/us/en/servers/server-operating-systems.html
HPE Server UEFI
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured
configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen11 servers have a UEFI Class
3 implementation.
Notes: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more
information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as
• Secure Boot and Secure Start enabled for enhanced security
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.2 Gen1 Stack
• Embedded UEFI Shell
• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
• PXE boot support for IPv4 IPv6 networks
• Workload Profiles for simple performance optimization
UEFI Boot Mode only
• TPM 2.0 Support
• NVMe Boot Support
• iSCSI Software Initiator Support.
• HTTP/HTTPs Boot support as a PXE alternative.
• Boot support for option cards that only support a UEFI option ROM
Notes: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
Page 10
Standard Features
Industry Standard Compliance

• ACPI 6.4 Compliant
• PCIe 5.0 Compliant
• WOL Support
• Microsoft® Logo certifications
• Support for Microsoft Secure Code
• PXE Support
• VGA/Display Port
• USB 3.2 Gen1 Compliant
• USB 2.0 Compliant
• OCP 3.0 SFF NIC Support
• OCP 3.0 SFF Storage Support
• Embedded TPM Support
• Energy Star
• SMBIOS 3.4
• UEFI 2.7
• UEFI Class 3 (Unified Extensible Firmware Interface Forum)
• Redfish API
• IPMI 2.0
• Advanced Encryption Standard (AES)
• Triple Data Encryption Standard (3DES)
• SNMP v3
• TLS 1.2
• DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
• DMTF Redfish support for SecureBoot Key Management
• ACPI DSM Drive LED Management
• Memory Page Retire Support
• Retire old VMware Secure Boot Key
• MCTP
• I3C Engine
• APML
• Active Directory v1.0
• ASHRAE A3/A4
Notes: For additional technical, thermal details regarding ambient temperature, humidity, and feature support, please
visit https://www.hpe.com/support/ASHRAEGen11
Embedded Management
HPE Integrated Lights-Out (HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO.
Learn more at http://www.hpe.com/info/ilo.
UEFI
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI).
Learn more at http://www.hpe.com/servers/uefi
Intelligent Provisioning
Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning.
Learn more at http://www.hpe.com/servers/intelligentprovisioning
Page 11
Standard Features
iLO RESTful API

iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and
maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi
HPE GreenLake for Compute Ops Management

HPE is intelligently transforming compute management with an intuitive cloud operating experience through HPE GreenLake
cloud platform to streamline and secure operations from edge-to-cloud. Automated key lifecycle tasks, for onboarding, updating,
managing, and monitoring HPE servers, brings agility and greater efficiencies to wherever compute devices reside via a unified
single browser-based interface. Manage single locations or multiple, distributed sites. Keep tens to thousands of servers secure
with batch policy controls and automated updates.
Compute Ops Management is cloud-native software that is continually updated with new services, features, patches, and fixes. The
management application resides in the HPE GreenLake cloud platform (access via https://console.greenlake.hpe.com) and
leverages the HPE GreenLake architecture, security, and unified operations.
Each HPE ProLiant Gen11 rack, tower and micro server will include a 3-year subscription to HPE GreenLake for Compute Ops
Management.
For more information, visit the HPE GreenLake for Compute Ops Management QuickSpecs:
https://www.hpe.com/psnow/doc/a50004263enw
Server Utilities
Active Health System
The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous,
proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs
Active Health System Viewer

The Active System Health Viewer (AHSV) was deprecated as of March 2022. Users are now recommended to use the InfoSight
(https://www.hpe.com/us/en/solutions/infosight.html) for Servers Portal for AHS viewing capabilities. In InfoSight for Servers portal,
users will also be able to view hardware configuration details, firmware and driver information, warranty and support status of a
server, wellness alerts, and create support cases for servers under a valid warranty or support contract.
HPE InfoSight provides the same security assurances as that of AHSV. Furthermore, InfoSight can be used as an AHSV
replacement even if customers do not want to share AHSV logs and telemetry data on an ongoing basis.
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the
firmware and driver updates of the Service Pack for ProLiant (SPP).
Learn more at https://www.hpe.com/us/en/servers/smart-update.html
iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free,
downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9, Gen10 and
Gen11 HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities.
Learn more at http://www.hpe.com/servers/iLOamplifierpack
RESTful Interface Tool

RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at
scale. Learn more at http://www.hpe.com/info/resttool
Page 12
Standard Features
Scripting Tools
Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or
Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/powershell
HPE OneView Standard

HPE OneView is an on premises, multi-generational server monitoring and management solution. HPE OneView Standard can be
used for inventory, health monitoring, alerting, and reporting without additional fees. Customers can upgrade their management
experience with an HPE OneView Advanced license, all provided by the same tool. Learn more at
http://www.hpe.com/info/oneview.
Security
• UEFI Secure Boot and Secure Start support
• Immutable Silicon Root of Trust
• FIPS 140-3 validation (iLO 6 certification in progress)
• Common Criteria certification (iLO 6 certification in progress)
• Configurable for PCI DSS compliance
• Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
• Support for Commercial National Security Algorithms (CNSA)
• Tamper-free updates --- components digitally signed and verified
• Secure Recovery --- recover critical firmware to known good state on detection of compromised firmware
• Ability to rollback firmware
• Secure erase of NAND
• TPM (Trusted Platform Module) 2.0
• Front bezel key-lock feature --- standard, available in both Tower and Rack models
• Padlock slot, standard
• Kensington Lock slot, standard
• Chassis Intrusion detection option
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE Authorized
Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for
software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through
HPE Services operational services or customized service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty
repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to
replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added
complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. 3) Non CSR
parts must be serviced by a trained authorized service engineer. Additional information regarding worldwide limited warranty
and technical support is available at: https://www.hpe.com/support/ProLiantServers-Warranties
Page 13
Optional Features
Server Management
HPE iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license
includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and
replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power
management functionality.
HPE OneView Advanced-

HPE OneView brings a new level of automation to infrastructure management by taking a template driven approach to
provisioning, updating, and integrating compute, storage, and networking infrastructure. It provides full-featured licenses which can
be purchased for managing Gen8, Gen9, Gen10 and Gen11 servers. To learn more visit http://www.hpe.com/info/oneview.
HPE InfoSight for Servers

HPE InfoSight for Servers combines the cloud-based machine learning of InfoSight with the health and performance monitoring of
Active Health System (AHS) and iLO to optimize performance and predict and prevent problems. The end result is an intelligent
environment that modernizes IT operations and enhances the support experience by predicting and preventing the infrastructure
issues that lead to application disruptions, wasted IT staff time and missed business opportunities.
Learn more at https://www.hpe.com/servers/infosight
HPE Insight Cluster Management Utility (CMU)

HPE Insight Cluster Management Utility is a HyperScale management framework that includes software for the centralized
provisioning, management and monitoring of nodes and infrastructure. Learn more at HPE Insight Cluster Management Utility.
Accelerator and GPGPU Information

Hewlett Packard Enterprise supports various accelerators on select HPE Proliant servers to support different workloads. The
accelerators enable seamless integration of GPU computing with HPE ProLiant servers for high-performance computing, large
data center graphics, deep learning and virtual desktop deployments. These accelerators deliver all of the standard benefits of
GPU computing while enabling maximum reliability and tight integration with system monitoring and management tools such as
HPE Insight Cluster Management Utility.
Rack and Power Infrastructure

The story may end with servers, but it starts with the foundation that makes compute go – and business grow. We’ve reinvented
our entire portfolio of rack and power products to make IT infrastructure more secure, more practical, and more efficient. In other
words, we’ve created a stronger, smarter, and simpler infrastructure to help you get the most out of your IT equipment. As an
industry leader, Hewlett Packard Enterprise is uniquely positioned to address the key concerns of power, cooling, cable
management and system access.
HPE G2 Advanced and Enterprise Racks are perfect for the server room or today’s modern data center with enhanced airflow and
thermal management, flexible cable management, and a 10 year Warranty to support higher density computing.
HPE G2 PDUs offer reliable power in flexible form factors that operate at temperatures up to 60°, include color-coded outlets and
load segments and a low-profile design for optimal access to the rack and support for dense rack environments.
HPE Uninterruptible Power Systems are cost-effective power protection for any type workload. Some UPSs include options for
remote management and extended runtime modules so you’re critical dense data center is covered in power outages.
HPE KVM Solutions include a console and switches designed to work with your server and IT equipment reliably. We’ve got a cost-
effective KVM switch for your first rack and multiple connection IP switches with remote management and security capabilities to
keep your data center rack up and running.
Learn more about HPE Racks, KVM, PDUs and UPSs at HPE Rack and Power Infrastructure.
Page 14
Optional Features
One Config Simple (SCE)

SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5
minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require
"custom" rack configuration or configuration for products not available in SCE, please contact Hewlett Packard Enterprise
Customer Business Center or an Authorized Partner for assistance.
https://h22174.www2.hpe.com/SimplifiedConfig/Welcome
Page 15
Service and Support
HPE Services
No matter where you are in your digital transformation journey, you can count on HPE Services to deliver the expertise you need
when, where and how you need it. From planning to deployment, ongoing operations and beyond, our experts can help you realize
your digital ambitions.
https://www.hpe.com/services
Consulting Services
No matter where you are in your journey to hybrid cloud, experts can help you map out your next steps. From determining what
workloads should live where, to handling governance and compliance, to managing costs, our experts can help you optimize your
operations.
https://www.hpe.com/services/consulting
HPE Managed Services

HPE runs your IT operations, providing services that monitor, operate, and optimize your infrastructure and applications, delivered
consistently and globally to give you unified control and let you focus on innovation.
HPE Managed Services | HPE
Operational services
Optimize your entire IT environment and drive innovation. Manage day-to-day IT operational tasks while freeing up valuable time
and resources. Meet service-level targets and business objectives with features designed to drive better business outcomes.
https://www.hpe.com/services/operational
HPE Complete Care Service

HPE Complete Care Service is a modular, edge-to-cloud IT environment service designed to help optimize your entire IT
environment and achieve agreed upon IT outcomes and business goals through a personalized experience. All delivered by an
assigned team of HPE Services experts. HPE Complete Care Service provides:
• A complete coverage approach -- edge to cloud
• An assigned HPE team
• Modular and fully personalized engagement
• Enhanced Incident Management experience with priority access
• Digitally enabled and AI driven customer experience
https://www.hpe.com/services/completecare
HPE Tech Care Service

HPE Tech Care Service is the operational support service experience for HPE products. The service goes beyond traditional
support by providing access to product specific experts, an AI driven digital experience, and general technical guidance to not only
reduce risk but constantly search for ways to do things better. HPE Tech Care Service delivers a customer-centric, AI driven, and
digitally enabled customer experience to move your business forward. HPE Tech Care Service is available in three response levels.
Basic, which provides 9x5 business hour availability and a 2-hour response time. Essential which provides a 15-minute response
time 24x7 for most enterprise level customers, and Critical which includes a 6-hour repair commitment where available and outage
management response for severity 1 incidents.
https://www.hpe.com/services/techcare
Page 16
Service and Support
HPE Lifecycle Services

HPE Lifecycle Services provide a variety of options to help maintain your HPE systems and solutions at all stages of the product
lifecycle. A few popular examples include:
• Lifecycle Install and Startup Services: Various levels for physical installation and power on, remote access setup,
installation and startup, and enhanced installation services with the operating system.
• HPE Firmware Update Analysis Service: Recommendations for firmware revision levels for selected HPE products, taking
into account the relevant revision dependencies within your IT environment.
• HPE Firmware Update Implementation Service: Implementation of firmware updates for selected HPE server, storage, and
solution products, taking into account the relevant revision dependencies within your IT environment.
• Implementation assistance services: Highly trained technical service specialists to assist you with a variety of activities,
ranging from design, implementation, and platform deployment to consolidation, migration, project management, and
onsite technical forums.
• HPE Service Credits: Access to prepaid services for flexibility to choose from a variety of specialized service activities,
including assessments, performance maintenance reviews, firmware management, professional services, and operational
best practices.
Notes: To review the list of Lifecycle Services available for your product go to:
https://www.hpe.com/services/lifecycle
For a list of the most frequently purchased services using service credits, see the HPE Service Credits Menu
Other Related Services from HPE Services:

HPE Education Services
Training and certification designed for IT and business professionals across all industries. Broad catalogue of course offerings to
expand skills and proficiencies in topics ranging from cloud and cybersecurity to AI and DevOps. Create learning paths to expand
proficiency in a specific subject. Schedule training in a way that works best for your business with flexible continuous learning
options.
https://www.hpe.com/services/training
Defective Media Retention

An option available with HPE Complete Care Service and HPE Tech Care Service and applies only to Disk or eligible SSD/Flash
Drives replaced by HPE due to malfunction.
Consult your HPE Sales Representative or Authorized Channel Partner of choice for any additional questions and services options.
Parts and Materials

HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in
operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in
the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or
replaced as part of these services.
How to Purchase Services

Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise Authorized Service Partners:
• Services for customers purchasing from HPE or an enterprise reseller are quoted using HPE order configuration tools.
• Customers purchasing from a commercial reseller can find services at https://ssc.hpe.com/portal/site/ssc/
Page 17
Service and Support
AI Powered and Digitally Enabled Support Experience

Achieve faster time to resolution with access to product-specific resources and expertise through a digital and data driven
customer experience
Sign into the HPE Support Center experience, featuring streamlined self-serve case creation and management capabilities with
inline knowledge recommendations. You will also find personalized task alerts and powerful troubleshooting support through an
intelligent virtual agent with seamless transition when needed to a live support agent.
https://support.hpe.com/hpesc/public/home/signin
Consume IT On Your Terms

HPE GreenLake edge-to-cloud platform brings the cloud experience directly to your apps and data wherever they are—the edge,
colocations, or your data center. It delivers cloud services for on-premises IT infrastructure specifically tailored to your most
demanding workloads. With a pay-per-use, scalable, point-and-click self-service experience that is managed for you, HPE
GreenLake edge-to-cloud platform accelerates digital transformation in a distributed, edge-to-cloud world.
• Get faster time to market
• Save on TCO, align costs to business
• Scale quickly, meet unpredictable demand
• Simplify IT operations across your data centers and clouds
To learn more about HPE Services, please contact your Hewlett Packard Enterprise sales representative or Hewlett Packard
Enterprise Authorized Channel Partner. Contact information for a representative in your area can be found at "Contact HPE"
https://www.hpe.com/us/en/contact-hpe.html
For more information

http://www.hpe.com/services
Page 18
Pre-configured Models
Pre-Configured models ship with the configurations below.

• Pre-Configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
• Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional
options purchased will not be shipped inside the server.
• Network Choice models do not include embedded LOM.
Base Models
P55536-001
P55536-291 P70278-291
SKU Number P55640-421
P55536-371 P70278-421
P55536-AA1
P70278‑291:
HPE ProLiant ML110 Gen11 4510
2.4GHz 12-core 1P 32GB-R
MR408i-o 8SFF 800W RPS JP
HPE ProLiant ML110 Gen11 4410Y HPE ProLiant ML110 Gen11 4410Y Server
Model Name 2.0GHz 12-core 1P 32GB-R VROC 2.0GHz 12-core 1P 32GB-R VROC
8SFF 800W RPS Server 8SFF 1000W RPS Server P70278‑421:
HPE ProLiant ML110 Gen11 4510
MR408i-o 8SFF 1000W RPS EMEA
Server
Chassis HPE ProLiant ML110 Gen11 SFF Configure-to-order Server
Processor 4410Y (12 core, 2.0 GHz, 150W) 4410Y (12 core, 2.0 GHz, 150W) 4510 (12 core, 2.4 GHz, 150W)
Number of
One
Processors
32 GB (1x32 GB , 4800 MT/s) 32 GB (1x32 GB , 4800 MT/s) 32 GB (1x32 GB , 5600 MT/s)
Memory Notes: Runs at 4000 MT/s due to Notes: Runs at 4000 MT/s due to Notes: Runs at 4400 MT/s due to
processor limitation. processor limitation. processor limitation.
Network
Embedded 2-Port 1GbE BCM5720 networking ports
Controller
Embedded 8 SATA ports controller Embedded 8 SATA ports controller
with Intel® VROC Software RAID. with Intel® VROC Software RAID.
Storage Notes: Embedded controller can Notes: Embedded controller can HPE MR408i-o Gen11 x8 Lanes
4GB Cache OCP SPDM Storage
Controller only support SATA drive, additional only support SATA drive, additional
Controller
storage controller is required to storage controller is required to
support SAS drive. support SAS drive.
Included
None ship standard, 8 SFF supported
Hard Drives
Optional. None ship standard.
Optical Drive
Notes: Optical Disk Drive Cable Kit (P57364-B21) is required.
Expansion
PCIe Gen5: 2 slots (x16), upgradable to 4 slots (x16); OCP3 with PCIe Gen5: 1 slot (x16)
Slots
Page 19
P70278‑291:
1x HPE 800W Flex Slot Platinum
Hot Plug Low Halogen Power Supply
Kit
1x HPE 1000W Flex Slot Titanium Notes: Additional Power Supply Kit
Hot Plug Low Halogen Power Supply (P38995-B21) provides 1+1 power
Hot Plug Power Supply Kit
Power Kit
Notes: Additional Power Supply Kit redundancy feature.
Supply Notes: Additional Power Supply Kit
(P03178-B21) provides 1+1 power P70278‑421:
(P38995-B21) provides 1+1 power
redundancy feature. 1x HPE 1000W Flex Slot Titanium
redundancy feature.
Hot Plug Power Supply Kit
Notes: Additional Power Supply Kit
redundancy feature.
Default with 2 standard fans, non-hot-plug. Optional Redundant Fan Kit (P49984-B21) provides advanced
Fans cooling in heavier configurations and redundancy functionality.
Notes: Configurations that require fan kits are provided in later sections.
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download); HPE
Management
iLO Advanced and HPE OneView Advanced (require licenses)
P55536‑001, P55536‑291 &
P55536‑371:
Security TPM (Trusted Platform Module) TPM (Trusted Platform Module) TPM (Trusted Platform Module)
P55536‑AA1:
TPM disabled for shipments to China
4.5U Tower. Optional Tower-to-Rack conversion kit (P47394-B21) to convert the unit to a 5.5U Rack-mount
Form Factor
server.
Warranty Server warranty includes 3-year parts, 3-year labor, 3-year onsite support with next business day response.
Performance Models
P55537-001
P55537-291
SKU Number P55641-421 P70279-421
P55537-371
P55537-AA1
HPE ProLiant ML110 Gen11 4514Y
HPE ProLiant ML110 Gen11 5416S HPE ProLiant ML110 Gen11 5416S
Model Name 2.0GHz 16-core 1P 32GB-R VROC 2.0GHz 16-core 1P 32GB-R VROC
MR408i-o 8SFF 1000W RPS EMEA
8SFF 800W RPS Server 8SFF 1000W RPS Server
Server
Processor 5416S (16 core, 2.0 GHz, 150W) 5416S (16 core, 2.0 GHz, 150W) 4514Y (16 core, 2.0 GHz, 150W)
Number of
One
Processors
Network
Controller
Page 20

Storage Notes: Embedded controller can Notes: Embedded controller can HPE MR408i-o Gen11 x8 Lanes
Controller
Included
None ship standard, 8 SFF supported
Hard Drives
Optical Drive
Expansion
Slots
1x HPE 1000W Flex Slot Titanium 1x HPE 1000W Flex Slot Titanium
Hot Plug Power Supply Kit Hot Plug Power Supply Kit
Power Kit
Notes: Additional Power Supply Kit Notes: Additional Power Supply Kit
Supply Notes: Additional Power Supply Kit
(P03178-B21) provides 1+1 power (P03178-B21) provides 1+1 power
redundancy feature. redundancy feature.
redundancy feature.
Management
P55537‑001, P55537‑291 &
P55537‑371:
P55537‑AA1:
TPM disabled for shipments to China
Form Factor
server.
Entry Models
P55533-001 P55535-001
P55533-291 P55535-291
P55533-371 P55535-371
P55533-AA1 P55535-AA1
HPE ProLiant ML110 Gen11 3408U HPE ProLiant ML110 Gen11 3408U HPE ProLiant ML110 Gen11 3408U
Model Name 1.8GHz 8-core 1P 16GB-R VROC 1.8GHz 8-core 1P 16GB-R VROC 1.8GHz 8-core 1P 32GB-R VROC
4LFF 500W RPS Server 4LFF 4TB 500W RPS Server 8SFF 800W RPS Server
HPE ProLiant ML110 Gen11 LFF HPE ProLiant ML110 Gen11 LFF HPE ProLiant ML110 Gen11 SFF
Chassis
Configure-to-order Server Configure-to-order Server Configure-to-order Server
Processor 3408U (8 core, 1.8 GHz, 125W)
Number of
One
Processors
Page 21

Network
Controller
Embedded 8 SATA ports controller with Intel® VROC Software RAID.
Storage
Notes: Embedded controller can only support SATA drive, additional storage controller is required to support
Controller
SAS drive.
Included None ship standard, 4 LFF None ship standard, 8 SFF
4TB SATA HDD
Hard Drives supported supported
Optical Drive
Expansion
Slots
1x HPE 500W Flex Slot Platinum 1x HPE 500W Flex Slot Platinum 1x HPE 800W Flex Slot Platinum
Hot Plug Low Halogen Power Supply Hot Plug Low Halogen Power Supply Hot Plug Low Halogen Power Supply
Power Kit Kit Kit
Supply Notes: Additional Power Supply Kit Notes: Additional Power Supply Kit Notes: Additional Power Supply Kit
(865408-B21) provides 1+1 power (865408-B21) provides 1+1 power (P38995-B21) provides 1+1 power
redundancy feature. redundancy feature. redundancy feature.
Management
P55533‑001, P55533‑291 & P55535‑001, P55535‑291 &
P55533‑371: P55535‑371:
P55533‑AA1: P55535‑AA1:
TPM disabled for shipments to China TPM disabled for shipments to China
Form Factor
server.
Page 22
Entry Models
SKU Number P55637-421 P55638-421 P55639-421
HPE ProLiant ML110 Gen11 3408U HPE ProLiant ML110 Gen11 3408U HPE ProLiant ML110 Gen11 3408U
Model Name 1.8GHz 8-core 1P 16GB-R VROC 1.8GHz 8-core 1P 16GB-R VROC 1.8GHz 8-core 1P 32GB-R VROC
4LFF 1000W RPS Server 4LFF 4TB 1000W RPS Server 8SFF 1000W RPS Server
HPE ProLiant ML110 Gen11 LFF HPE ProLiant ML110 Gen11 LFF HPE ProLiant ML110 Gen11 SFF
Chassis
Number of
One
Processors
Network
Controller
Storage
Controller
SAS drive.
Included None ship standard, 4 LFF None ship standard, 8 SFF
4TB SATA HDD
Hard Drives supported supported
Optical Drive
Expansion
Slots
Power 1x HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit
Supply Notes: Additional Power Supply Kit (P03178-B21) provides 1+1 power redundancy feature.
Management
Security TPM (Trusted Platform Module)
Form Factor
server.
Page 23
Entry Models
Model Name HPE ProLiant ML110 Gen11 3408U 1.8GHz 8-core 1P 16GB-R VROC 4LFF 4TB 500W RPS Server
Chassis HPE ProLiant ML110 Gen11 LFF Configure-to-order Server
Number of
One
Processors
16 GB (1x16 GB , 4800 MT/s)
Memory
Notes: Runs at 4000 MT/s due to processor limitation.
Network
Controller
Storage
Controller
SAS drive.
Included
4TB SATA HDD
Hard Drives
Optical Drive
Expansion
Slots
1x HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Power
Notes: Additional HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (865408-B21)
Supply
provides 1+1 power redundancy feature.
Management
Form Factor
server.
Page 24
Smart Choice Models

SKU Number P69303-005 P71647-425 P71648-035
HPE ProLiant ML110 Gen11 4410Y HPE ProLiant ML110 Gen11 3508U HPE ProLiant ML110 Gen11 3508U
12-core 1P 32GB-R MR408i-o 8SFF 2.1GHz 8-core 1P 32GB-R VROC 2.1GHz 8-core 1P 32GB-R VROC
Model Name
2x480GB SSD 2x800W RPS AMS 4LFF 2x2TB HDD 2x1000W RPS 4LFF 2x2TB HDD 2x1000W RPS
Server EU Server UK/IE Server
HPE ProLiant ML110 Gen11 SFF HPE ProLiant ML110 Gen11 LFF HPE ProLiant ML110 Gen11 LFF
Chassis
Processor 4410Y (12 core, 2.0 GHz, 150W) 3508U (8 core, 2.1 GHz, 125W) 3508U (8 core, 2.1 GHz, 125W)
Number of
One
Processors
Network
Controller
Storage HPE MR408i-o Gen11 x8 Lanes Notes: Embedded controller can Notes: Embedded controller can
Controller
Included
2x 480GB SATA SSD 2x 2TB SATA HDD 2x 2TB SATA HDD
Hard Drives
Optical Drive
Expansion
Slots
Power 2x HPE 800W Flex Slot Platinum

Supply Hot Plug Power Supply Kit Hot Plug Power Supply Kit
Kit
Management
Form Factor
server.
Page 25
Smart Choice Models

SKU Number P71659-425 P71670-035 P71683-005
HPE ProLiant ML110 Gen11 4510 HPE ProLiant ML110 Gen11 4510 HPE ProLiant ML110 Gen11 3508U
12-core 1P 64GB-R MR408i-o 8SFF 12-core 1P 64GB-R MR408i-o 8SFF 2.1GHz 8-core 1P 32GB-R MR408i-
Model Name
2x480GB SSD 2x1000W RPS EU 2x480GB SSD 2x1000W RPS UK/IE o 4LFF 2x2TB HDD 2x500W RPS
Server Server AMS Server
HPE ProLiant ML110 Gen11 SFF HPE ProLiant ML110 Gen11 SFF HPE ProLiant ML110 Gen11 LFF
Chassis
Processor 4510 (12 core, 2.4 GHz, 150W) 4510 (12 core, 2.4 GHz, 150W) 3508U (8 core, 2.1 GHz, 125W)
Number of
One
Processors
Network
Controller
Storage
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller
Controller
Included
2x 480GB SATA SSD 2x 480GB SATA SSD 2x 2TB SATA HDD
Hard Drives
Optical Drive
Expansion
Slots
Power 2x HPE 500W Flex Slot Platinum

Supply Hot Plug Power Supply Kit Hot Plug Power Supply Kit
Kit
Management
Form Factor
server.
Page 26
Smart Choice Models

HPE ProLiant ML110 Gen11 4514Y 2.0GHz 16-core 1P 64GB-R MR408i-o 8SFF 2x960GB 2x800W RPS AMS
Model Name
Server
Processor 4514Y (16 core, 2.0 GHz, 150W)
Number of
One
Processors
64 GB (2x32 GB , 5600 MT/s)
Memory
Notes: Runs at 4400 MT/s due to processor limitation.
Network
Controller
Storage
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller
Controller
Included
2x 960GB SATA SSD
Hard Drives
Optical Drive
Expansion
Slots
Power
2x HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Supply
Management
Form Factor
server.
Country Code Key

• -001 = North America
• -005 = HPE Smart Choice for US and Canada
• -035 = HPE Smart Choice for United Kingdom
• -291 = Japan
• -371 = Asia Pacific
• -421 = Europe, the Middle East and Africa
• -425 = HPE Smart Choice for DACH (Germany, Switzerland, Austria), France, UKI (Great Britain, Ireland, Scotland, Wales)
• -AA1 = China
Page 27
HPE Smart Choice purchase program

• HPE Smart Choice purchase program is designed to make it easier to do business with HPE by offering fully configured
solutions.
• Order popular configs in a single SKU.
• Get immediate purchase price in minutes.
• Get fast, predictable shipping.
Notes: European Union Erp Lot 9 2024 Regulation
Beginning on January 1st, 2024, units sold into the European Union (EU), European Economic Area (EEA), the United Kingdom,
or Switzerland must include more efficient AC power supplies: 94% for multi-output and 96% for single-output. HPE Flexible Slot
power supplies are single-output, and part numbers 865438-B21, P03178-B21, and P44712-B21 are 96% efficient, thus
meeting requirements. HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in
advance to satisfy requests with the current power supplies by the set deadline.
Page 28
Configuration Information
Smart Templates from HPE

HPE is releasing new Smart Template technology in the One Config Advanced (OCA) configurator. These Templates represent
the CTO equivalents of the top-selling BTO configurations. They are intended to provide simple starting points to assist you in
easily creating and customizing your desired Server solutions. HPE Servers that have Platform Templates, developed by HPE
Product Managers, will have a separate tab in the HPE OCA configurator.
Workload Solutions Templates from HPE

The Workload Solutions Templates build on the Smart Templates technology to easily develop working configurations of the most
compelling Workload Solutions. The templates complement the Reference Builds developed by HPE. Workload Solutions
templates preconfigure some of the key architecture decisions and make it easier for Sellers to get started and complete a
differentiated server solution for your customer’s specific workload.
Mainstream SKUs
HPE launched the Mainstream SKU initiative as a market-driven approach to Demand Steering. It is a simplified portfolio of our top
selling options that meet the current and future market trends. HPE has committed to provide a more predictable and faster
experience for these options. Mainstream SKUs enjoy higher safety stock levels and have higher fulfilment service levels than
non-Mainstream SKUs. Mainstream orders are fulfilled +30% faster than non-Mainstream orders, have fewer shortages and better
recovery dates. This platform has Mainstream SKUs in the options portfolio, and is eligible for the improved Mainstream
experience. Mainstream SKUs are designated with a Mainstream symbol in our configurators.
Mainstream Configurations
HPE is using the new Smart Templates technology to present Mainstream configurations. All the options in a Mainstream
configuration are pre-selected Mainstream SKUs to optimize the performance, predictability and fulfilment experience. Check the
Template section in our configurators for eligible Mainstream configurations.
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
• Factory Integrated Models must start with a CTO Server.
• FIO indicates that this option is only available as a factory integratable option.
• All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
• Some options may not be integrated at the factory. Contact your local sales representative for additional information.
European Union Erp Lot 9 2024 Regulation
Beginning on January 1st, 2024, units sold into the European Union (EU), European Economic Area (EEA), the United Kingdom,
or Switzerland must include more efficient AC power supplies: 94% for multi-output and 96% for single-output. HPE Flexible Slot
power supplies are single-output, and part numbers 865438-B21, P03178-B21, and P44712-B21 are 96% efficient, thus meeting
requirements.
HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in advance to satisfy
requests with the current power supplies by the set deadline.
Page 29
Configuration Information
Step 1: Base Configuration (choose one of the following configurable models)

CTO Server HPE ML110 Gen11 LFF NHP HPE ML110 Gen11 LFF CTO HPE ML110 Gen11 SFF CTO
CTO Server Server Server
SKU Number P51516-B21 P51517-B21 P51518-B21
Processor Sockets 1 Socket available
Processor Intel Fourth Generation Xeon® Scalable Processors
DIMM Slots 16 DIMM slots available
Storage Controller Embedded 8 SATA ports controller with Intel® VROC Software RAID
Choice of HPE OCP-type RAID (OROC) and/or PCIe Standup controller card (s)
PCIe PCIe 5.0: 2 slots (x16), upgradable to 4 slots (x16)
OCP 3.0 with PCIe Gen 5.0: 1 slot (x16)
Drive Cage - included 4 LFF NHP SATA Drive Cage 4LFF SAS/SATA Drive Cage 8SFF SAS/SATA Drive Cage
Additional drive cages Optional one 4 LFF NHP SATA Optional one 4LFF or 8SFF** Optional one 8SFF SAS/SATA
Drive Cage kit SAS/SATA Drive Cage. Drive Cage kit
Notes: Mixing different type
Drive Cage with NHP CTO
server is not supported.
ODD Optional, Up to 1
Half-Height RDX Optional, Up to 1
Notes: RDX Cable Kit (P53491-B21) is required.
Megacell Battery Optional
Network Controller Embedded 2-Port 1GbE BCM5720 networking ports.
Choice of HPE OCP-type networking adapter and/or PCIe Standup controller card (s).
Redundant Fan Kit* 2 fans as standard. Optional Redundant Fan Kit (P49984-B21) provides advanced cooling in
heavier configurations and redundant functionality.
Power Supply HPE Flex Slot Hot Plug Power Supply Kit, up to 2
Management HPE iLO with Intelligent Provisioning (standard), iLO Advances and OneView (optional), HPE
GreenLake for Compute Ops Management (subscription included)
USB 5x USB 3.2 Gen1/2.0 ports, Plus front iLO Service Port
Tower-to-Rack Optional. Tower to Rack kit is not factory integratable option and will be shipped with standalone
conversion kit package.
Notes:
− * When one of the following scenarios occurs, Redundant Fan Kit (P49984-B21) is required.
Server with the following options installed:
ο SAS4 SFF SSD.
Server is required to continue operating with single fan failure. A flashing amber Health LED will indicate this condition.
Server is required to operate with the A3/A4 extended operating environment with ambient temperature 35°C (95°F) to
45°C (113°F).
− ** Mixed LFF and SFF Drive cages can be supported in one system. Please select the LFF CTO Server (P51517-B21) as the
base configuration to start with.
− Refer to HPE Power Advisor Tool to review the power requirement for your selected configuration and determine what
power supply module(s) to select.
− All CTO servers are Energy Star 3.0 compliant. After January 11, 2024, Energy Star 3.0 compliance is no longer valid.
Energy Star 4.0 certification will be valid upon system configuration.
Page 30
Core Options
Step 2: Choose Required Options (only one of the following unless otherwise noted)
Step 2a: Choose Processors
Processor Option Kits – Intel Fourth Generation Xeon® Scalable Processors

Notes:
− DDR5 memory speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
− 4800 MT/S maximum memory speed unless otherwise noted.
− 128GB SGX Enclave unless otherwise noted.
Intel Xeon-Gold Processors
Intel Xeon-Gold 6426Y 2.5GHz 16-core 185W Processor for HPE P49598-B21
Intel Xeon-Gold 6421N 1.8GHz 32-core 185W Processor for HPE P49641-B21
Notes: 4400 MT/s maximum memory speed.
Intel Xeon-Gold 5412U 2.1GHz 24-core 185W Processor for HPE P49618-B21
Intel Xeon-Gold 5418Y 2.0GHz 24-core 185W Processor for HPE P49612-B21
Intel Xeon-Gold 5416S 2.0GHz 16-core 150W Processor for HPE P49653-B21
Intel Xeon-Gold 5415+ 2.9GHz 8-core 150W Processor for HPE P49597-B21
Intel Xeon-Sliver Processors
Intel Xeon-Silver 4416+ 2.0GHz 20-core 165W Processor for HPE P49611-B21
Notes:
− 4000 MT/s maximum memory speed.
− 64GB SGX Enclave.
Intel Xeon-Silver 4410Y 2.0GHz 12-core 150W Processor for HPE P49610-B21
Notes:
Intel Xeon-Bronze Processors
Intel Xeon-Bronze 3408U 1.8GHz 8-core 125W Processor for HPE P49617-B21
Notes:
− Up to PCIe Gen4 supported.
Page 31
Core Options
Processor Option Kits – Intel Fourth Generation Xeon® Scalable Processors

Notes:
− DDR5 memory speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
− 4800 MT/S maximum memory speed unless otherwise noted.
− 128GB SGX Enclave unless otherwise noted.
Intel Xeon-Gold Processors
Intel Xeon-Gold 5512U 2.1GHz 28-core 185W Processor for HPE P67101-B21
Intel Xeon-Gold 5515+ 3.2GHz 8-core 165W Processor for HPE P67079-B21
Intel Xeon-Sliver Processors
Intel Xeon-Silver 4516Y+ 2.2GHz 24-core 185W Processor for HPE P67093-B21
Notes:
− 4400 MT/S maximum memory speed.
Notes:
Intel Xeon-Silver 4510 2.4GHz 12-core 150W Processor for HPE P67091-B21
Notes:
− Intel VROC NVMe feature is not supported.
− 96GB DDR5-5600 DIMM is not supported.
Notes:
Intel Xeon-Bronze Processors
Intel Xeon-Bronze 3508U 2.1GHz 8-core 125W Processor for HPE P67100-B21
Notes:
− Up to PCIe Gen4 supported.
Step 2b: Choose Memory Options
Please select one or more memory from below.
For new Gen11 memory population rule whitepaper and optimal memory performance guidelines, please go to:
https://www.hpe.com/docs/memory-population-rules
For Gen11 memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table
Page 32
Core Options
For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy mirrored
memory feature etc. please go to: https://www.hpe.com/psnow/doc/a50007802enw
Notes:
− The maximum memory speed and capacity is a function of the memory type, memory configuration, and processor model.
− Quantity of memory DIMMs selected per socket must be 1, 2, 4, 6, 8, 12 or 16.
− For additional information, please see the HPE DDR5 Smart Memory QuickSpecs.
− For General Server Memory and Persistent Memory Population Rules and Guidelines, see details here:
http://www.hpe.com/docs/memory-population-rules
− HPE Server Memory compatibility for a specific server platform may vary or be limited within a server platform depending
upon the specific configuration being requested. Because each server environment and requirements can vary, memory
compatibility is based not only upon the server family, but may also be affected by the amount and type of additional
hardware options installed within a specific server configuration. For this reason, some HPE memory DIMMs may be
qualified for an HPE server model or family and yet occasionally not be supported with some configurations within that
server family.
− The new 5600 DIMMs are for the Fifth generation Intel Xeon® Scalable Processors; while the 4800 DIMMs are for the
Fourth generation Intel Xeon® Scalable Processors.
Memory – for the Fourth Generation Intel Xeon® Scalable Processors

Description
HPE 16GB (1x16GB) Single Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit P43322-B21
HPE 32GB (1x32GB) Dual Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit P43328-B21
Memory – for the Fifth Generation Intel Xeon® Scalable Processors

Description
HPE 16GB (1x16GB) Single Rank x8 DDR5-5600 CAS-46-45-45 EC8 Registered Smart Memory Kit P64705-B21
Notes: 96GB DDR5-5600 DIMM is not supported with 4510, 4509Y and 3508U processors.
Step 2c: Choose Power Supplies
Notes:
− Mixing 2 different power supplies is NOT supported.
− Selection of two HPE Flex Slot power supplies provide 1+1 power redundancy.
− To review the power requirements for your selected configuration, please use the HPE Power Advisor Tool.
Power Supplies
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit 865408-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit P38995-B21
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit P03178-B21
Notes: Only supports high line voltage (200 VAC to 240 VAC).
Page 33
Additional Options
Step 3: Choose Additional Factory Integratable Options

Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise
recommends the use of an HPE approved configurator. Contact your local sales representative for additional information.
Notes: The User Guide (UG) can help to explain the cable routing for each option.
Storage Devices
Storage Controllers
Notes:
− When selecting SR RAID controllers for external storage (E208e, 804398-B21) and MR RAID controllers for internal
storage(MR216i/MR416i/MR408i) in the order, please be aware these two products use different RAID configuration tools
− Not supporting mixing of MR (MegaRAID) series internal controllers and SR (SmartRAID) series internal Controllers
− OCP-type RAID (OROC) controller is only supported on OCP 1 slot.
− OCP 1 enablement kit is not required for listed OROC controllers below.
− For more information on the HPE Gen11 Storage Controller, please refer to:
HPE Compute MR Gen11 Controllers Quick Spec
HPE Compute SR Gen11 Controllers Quick Spec
Essential RAID Controllers

HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller 804398-B21
Notes: This controller supports up to 8 SAS/SATA Drives (external)
For more information on the HPE Smart Array E208i-p SR Gen10 Controller, please refer to the QuickSpecs
Page 34
Additional Options
Tri-mode RAID Controllers

HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller P47789-B21
Notes:
− Does not occupy a PCIe expansion slot.
− This controller supports up to 16 SAS/SATA/NVMe Drives with RAID 0/1/10.
HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller P47785-B21
Notes: This controller supports up to 16 SAS/SATA/NVMe Drives with RAID 0/1/10.
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller P58335-B21
Notes:
− This controller supports up to 8 SAS/SATA/NVMe Drives
− HPE 96W Smart Storage Battery 260mm Cbl (P01367-B21) OR HPE Smart Hybrid Capacitor w/ 260mm
Cbl (P02381-B21) must be selected with this controller.
HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller P47781-B21
Notes:
HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage Controller P47777-B21
Notes:
Smart Storage Battery Cable Kits
HPE 96W Smart Storage Lithium-ion Battery with 260mm Cable Kit P01367-B21
HPE Smart Storage Hybrid Capacitor with 260mm Cable Kit P02381-B21
Notes: The two 260mm cable kit can’t be selected together.
Software RAID
Notes:
− Requires UEFI, not supported on Legacy Mode.
− For NVMe SSDs only, no PCIe card support.
− Additional steps are required for OS installation with Intel VROC, please refer to the link Intel Virtual RAID
on CPU for HPE Gen11 User Guide - Installing OS on the Intel VROC RAID
Intel Virtual RAID on CPU Standard FIO Software for HPE S0E37A
Notes:
− Supports RAID 0/1/10
− ML110 Gen11 supports up to 2x M.2 NVMe drives on onboard slots with Intel Virtual RAID on CPU
Standard for RAID 0/1/10 (S0E37A/S0E38AAE).
Intel Virtual RAID on CPU Standard E-RTU for HPE S0E38AAE

Notes:
− Supports RAID 0/1/10
− Similar to Intel Virtual RAID on CPU Standard FIO Software for HPE (S0E37A), but intended for field
deployments (BTO).
Page 35
Additional Options
− ML110 Gen11 supports up to 2x M.2 NVMe drives on onboard slots with Intel Virtual RAID on CPU
Standard for RAID 0/1/10 (S0E37A/S0E38AAE).
Drive Cage
HPE ProLiant ML110 Gen11 4LFF Non-hot Plug Drive Cage Kit P53481-B21
Notes: Add additional 4 NHP LFF drive cage, allowing for up to 8 NHP LFF SATA drive support (4+4).
HPE ProLiant ML110 Gen11 4LFF Drive Cage Kit P53482-B21
Notes: Add additional 4 LFF hot-plug drive cage, allowing for up to 8 LFF SAS/SATA drive support (4+4).
HPE ProLiant ML110 Gen11 8SFF Drive Cage Kit P53483-B21
Notes: Add additional 8 SFF hot-plug drive cage, allowing for up to 16 SFF SAS/SATA drive support (8+8).
Storage Controller Cables
HPE ProLiant ML110 Gen11 LFF PCIe Cable Kit P53484-B21
Notes: Select this cable kit to support p-type RAID controller with LFF drive cage.
HPE ProLiant ML110 Gen11 SFF OROC Cable Kit P53485-B21
Notes: Select this cable kit to support embedded or OCP-type (OROC) controller with SFF drive cage.
HPE ProLiant ML110 Gen11 SFF PCIe Cable Kit P55859-B21
Notes: Select this cable kit to support p-type RAID controller with SFF drive cage.
Optical Drive
HPE 9.5mm SATA DVD-ROM Optical Drive 726536-B21
Notes: When this ODD selected, ODD cable Kit (P57364-B21) is required.
HPE 9.5mm SATA DVD-RW Optical Drive 726537-B21
Notes: When this ODD selected, ODD cable Kit (P57364-B21) is required.
HPE Mobile USB DVD-RW Optical Drive 701498-B21
Optical Drive Accessories
HPE ProLiant ML110 Gen11 Optical Disk Drive Cable Kit P57364-B21
Notes: When internal ODD selected, this ODD cable Kit is required.
Riser Cards
HPE ProLiant ML110 Gen11 GPU Riser Kit P53487-B21
Notes:
− Add this riser kit to provide additional PCIe Gen5.0 x16 slot on slot 2.
− An additional PCIe adapter is recommended to be installed on slot 2 to get proper thermal condition.
− When L4 GPU selected, this riser kit is required.
HPE ProLiant ML110 Gen11 Second GPU Riser Kit P53488-B21
Notes:
− Add this riser kit to provide additional PCIe Gen5.0 x16 slot on slot 3.
− When this Riser Kit is selected, HPE ProLiant ML110 Gen11 GPU Riser Kit (P53487-B21) is required.
Page 36
Additional Options
HPE Computation and Graphics Accelerators

Notes:
− System memory is recommended to be 2 times larger than the memory with accelerator card.
− Redundant Fan Kit (P49984-B21) is required for accelerators.
− System fans may operate at higher speed and higher acoustic level to maintain optimum system cooling
condition with accelerator card.
NVIDIA L4 24GB PCIe Accelerator for HPE S0K89C
Notes:
− This GPU requires Redundant Fan Kit (P49984-B21), GPU Riser Kit (P53487-B21), L4 GPU Support Kit
(P66618-B21) with 25°C maximum inlet temperature.
− The system supports up to 2x L4 GPUs with Second GPU Riser Kit (P53488-B21).
− When this GPU selected, Processor is limited with up to 150W TDP.
HPE ProLiant ML110 Gen11 NVIDIA L4 GPU Support Kit P66618-B21
Notes:
− This support kit supports up to 2x L4 GPUs.
− Memory DIMM blanks within this support kit are required to be installed on all empty memory DIMM slots.
HPE Drives
HPE Hard Disk Drives
Notes: System fans may operate at higher speed and higher acoustic level to maintain optimum system cooling
condition with 10K/15K SAS SFF HDD. Please consider acoustic optimized with SATA/SAS 12G SFF SSD in
configuration.
Note Mission Critical - 12G SAS - SFF Drives SKU
1,2 HPE 300GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD P28028-B21
HPE 300GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD P40430-B21
HPE 600GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD P53561-B21
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD P28586-B21
HPE 1.8TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD P53562-B21
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD P28352-B21
Mission Critical - 12G SAS - SFF SED (Self-Encryption Drive)
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Self-encrypting FIPS HDD P28622-B21
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Self-encrypting FIPS HDD P28618-B21
Business Critical - 12G SAS - LFF Drives
HPE 2TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 833926-B21
HPE 4TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 833928-B21
HPE 6TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor HDD 861746-B21
HPE 8TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor HDD 834031-B21
HPE 12TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi Vendor HDD 881781-B21
HPE 14TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi Vendor HDD P09155-B21
HPE 16TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi Vendor HDD P23608-B21
HPE 20TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi Vendor HDD P53553-B21
Page 37
Additional Options
Business Critical - 6G SATA - LFF Drives

HPE 1TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 861686-B21
HPE 1TB SATA 6G Business Critical 7.2K LFF RW 1-year Warranty Multi Vendor HDD 801882-B21
HPE 4TB SATA 6G Business Critical 7.2K LFF RW 1-year Warranty Multi Vendor HDD 801888-B21
HPE 6TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor HDD 861742-B21
HPE 8TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor HDD 834028-B21
HPE 12TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi Vendor HDD 881787-B21
HPE 16TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE Multi Vendor HDD P23449-B21
HPE Solid State Drives

Notes: System fans may operate at higher speed and higher acoustic level to maintain optimum system cooling condition with
SAS4 24G SFF SSD. Please consider acoustic optimized with SATA/SAS 12G SFF SSD in configuration.
For SSD selection guidance, please visit https://ssd.hpe.com/
Note Read Intensive - 12G/24G SAS - SFF - Solid State Drives
HPE 960GB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD P40506-B21
HPE 1.92TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD P40507-B21
2 HPE 960GB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49029-B21
2 HPE 1.92TB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49031-B21
1,2 HPE 3.84TB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49035-B21
HPE 3.84TB SAS Read Intensive SFF BC Self-encrypting FIPS 140-3 PM7 SSD P63875-B21
Mixed Use - 12G/24G SAS - SFF - Solid State Drives
HPE 960GB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40510-B21
HPE 1.92TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40511-B21
HPE 3.84TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD P40512-B21
2 HPE 800GB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49047-B21
2 HPE 1.6TB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49049-B21
1,2 HPE 3.2TB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49053-B21
1,2 HPE 6.4TB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49057-B21
2 HPE 1.6TB SAS Mixed Use SFF BC Self-encrypting FIPS 140-3 PM7 SSD P63871-B21
Read Intensive - 12G/24G SAS - SFF - SED (Self-Encryption Drive) Solid State Drives
2 HPE 3.84TB SAS 24G Read Intensive SFF BC Self-encrypting FIPS PM6 SSD P41398-B21
1,2 HPE 7.68TB SAS 24G Read Intensive SFF BC Self-encrypting FIPS PM6 SSD P41399-B21
Mixed Use - 12G/24G SAS - SFF - SED (Self-Encryption Drive) Solid State Drives
2 HPE 800GB SAS 24G Mixed Use SFF BC Self-encrypting FIPS PM6 SSD P41400-B21
2 HPE 1.6TB SAS 24G Mixed Use SFF BC Self-encrypting FIPS PM6 SSD P41401-B21
Mixed Use -12G/24G SAS - LFF- Solid State Drives
HPE 960GB SAS 12G Mixed Use LFF LPC Value SAS Multi Vendor SSD P37009-B21
Page 38
Additional Options
Mixed Use - 6G SATA - SFF - Solid State Drives

HPE 480GB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40502-B21
HPE 960GB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40503-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40504-B21
HPE 3.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40505-B21
HPE 480GB SATA 6G Mixed Use SFF BC PM897 SSD P44011-B21
HPE 960GB SATA 6G Mixed Use SFF BC PM897 SSD P44012-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC PM897 SSD P44013-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC Self-encrypting 5400M SSD P58248-B21
Read Intensive - 6G SATA - SFF - Solid State Drives
HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40496-B21
HPE 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40499-B21
HPE 480GB SATA 6G Read Intensive SFF BC PM893 SSD P44007-B21
HPE 960GB SATA 6G Read Intensive SFF BC PM893 SSD P44008-B21
HPE 1.92TB SATA 6G Read Intensive SFF BC PM893 SSD P44009-B21
HPE 3.84TB SATA 6G Read Intensive SFF BC PM893 SSD P44010-B21
HPE 1.92TB SATA 6G Read Intensive SFF BC Self-encrypting 5400P SSD P58240-B21
HPE 480GB SATA 6G Read Intensive SFF BC PM893a SSD P63886-B21
HPE 3.84TB SATA 6G Read Intensive SFF BC PM893a SSD P63910-B21
Read Intensive – 6G SATA - LFF – Solid State Drives
HPE 960GB SATA 6G Read Intensive LFF LPC Multi Vendor SSD P47808-B21
Read Intensive - SATA --- M.2 - Solid State Drives
3 HPE 480GB SATA 6G Read Intensive M.2 Multi Vendor SSD P47818-B21
Read Intensive - NVMe --- M.2 - Solid State Drives
3 HPE 480GB NVMe Gen4 Mainstream Performance Read Intensive M.2 PM9A3 SSD P69543-B21
3 HPE 480GB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD P40513-B21
3 HPE 960GB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD P40514-B21
3 HPE 1.92TB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD P40515-B21
Notes:
1. SAS 15K RPM SFF HDD and SAS4 SFF SSD drives which consume power equal to or higher than 15W are limited to
25°C maximum inlet temperature.
2. Redundant Fan Kit (P49984-B21) is required for SAS 15K SFF HDD and SAS4 SFF SSD.
3. Mixing of SATA M.2 and NVMe M.2 SSDs is not allowed.
Page 39
Additional Options
Networking
Notes:
− High performance networking cards equal or greater than 100Gb that may cause the fans to operate at higher speed and
higher acoustic level to maintain optimum system cooling when system at idle status.
− Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic
− environments must be purchased separately. Please see the related NIC QuickSpecs for Technical
Specifications and additional information: https://h20195.www2.hpe.com/v2/getpdf.aspx/A00002507ENW.
PCIe Adapters
1 Gigabit Ethernet adapters

Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter for HPE P51178-B21
Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter for HPE P21106-B21
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T Adapter for HPE P26253-B21
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ Adapter for HPE P26259-B21
10/25 Gigabit Ethernet adapters
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P26262-B21
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P08443-B21
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P42044-B21
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE P08458-B21
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter for HPE P21112-B21
OCP Adapter
1 Gigabit Ethernet OCP adapters

Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P51181-B21
Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P08449-B21
10 Gigabit Ethernet OCP Adapters
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE P26256-B21
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3 Adapter for HPE P10097-B21
10/25 Gigabit Ethernet OCP adapters
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P10106-B21
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P42041-B21
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P10115-B21
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE P26269-B21
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter for HPE P22767-B21
Page 40
Additional Options
OS Boot Device
HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device P48183-B21
Notes:
− When NS204i-u is selected, Redundant Fan Kit (P49984-B21) is required.
− When NS204i-u is selected, embedded controller for SATA drive is not available.
− NS204i-u is not supported with NHP CTO server.
− System fans may operate at higher speed and higher acoustic level to maintain optimum system cooling condition while
NS204i-u is installed.
HPE ProLiant ML110 Gen11 NS204i-u Enablement Kit P61742-B21
Notes: When NS204i-u is selected, this Enablement Kit is required.
Accessories
HPE ProLiant ML110 Gen11 Serial Port Cable Kit P53489-B21
Security Options
HPE ProLiant ML350/ML110 Gen11 Intrusion Cable Kit P47226-B21
Power and Cooling

Cooling Options
HPE ProLiant ML110 Gen11 Redundant Fan Kit P49984-B21
Notes: When one of the following scenarios occurs, Redundant Fan Kit (P49984-B21) is required.
− Server with the following options installed:
ο SAS4 SFF SSD.
− Server is required to continue operating with single fan failure. A flashing amber Health LED will
indicate this condition.
− Server is required to operate with the A3/A4 extended operating environment with ambient
temperature 35°C (95°F) to 45°C (113°F).
Power Suppliers
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot
plug, tool-less installation into HPE ProLiant Servers. Flex Slot power supplies are certified for high-efficiency
operation and offer multiple power output options, allowing users to "right-size" a power supply for specific
server configurations. This flexibility helps to reduce power
waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
Notes:
− Prior to making a power supply selection it is highly recommended that the HPE Power Advisor Tool is
run to determine the right size power supply for your server configuration.
− Visit HPE Power Cords and Cables for a full list of optional power cords.
− Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14
power inlet connector.
− Flex Slot Titanium power supplies support power efficiency of up to 96% and include a standard C-14
power inlet connector.
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit 865408-B21
Page 41
Additional Options
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit P03178-B21
Notes: Only supports high line voltage (200 VAC to 240 VAC).
Storage Backup
For the complete range of tape drives, autoloaders, libraries and media see:
https://www.hpe.com/us/en/storage/storeever-tape-storage.html.
For hardware and software compatibility of Hewlett Packard Enterprise tape backup products
http://www.hpe.com/storage/BURAcompatibility.
Notes:
− When an internal RDX docking station selected, HPE ProLiant ML110 Gen11 RDX Cable Kit (P53491-B21) is required.
− Support up to one RDX internal docking station in media bay.
− Required to change Thermal Configuration to Increased Cooling mode in BIOS/Platform Configuration (RBSU) menu and
system fans may operate at higher speed and higher acoustic level.
HPE Tape Drives
HPE StoreEver LTO-8 Ultrium 30750 External Tape Drive BC023A
HPE StoreEver LTO-9 Ultrium 45000 External Tape Drive BC042A
HPE StoreEver LTO-7 Ultrium 15000 External Tape Drive BB874A
HPE Tape Drives Cartridge
HPE LTO-6 Ultrium 6.25TB RW Data Cartridge C7976A
HPE LTO-7 Ultrium 15TB RW Data Cartridge C7977A
HPE LTO-8 Ultrium 30TB RW Data Cartridge Q2078A
HPE LTO-9 Ultrium 45TB RW Data Cartridge Q2079A
HPE Tape Backup Products
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 2m Cable K2R09A
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 4m Cable K2R10A
HPE RDX Products
HPE RDX External Docking Station C8S07B
HPE RDX Internal Docking Station C8S06A
HPE RDX 4TB Removable Disk Cartridge Q2048A
HPE RDX 500GB Removable Disk Cartridge Q2042A
Internal RDX Support Kit
HPE ProLiant ML110 Gen11 RDX Cable Kit P53491-B21
Notes: Supporting cables to add internal RDX device for data backup or archiving.
HPE Racks
• Please see the HPE Advanced Series Racks QuickSpecs for information on additional racks options and rack
specifications. HPE G2 Advanced Series Racks
• Please see the HPE Enterprise Series Racks QuickSpecs for information on additional racks options and rack
specifications. HPE G2 Enterprise Series Racks
Page 42
Additional Options
HPE Power Distribution Units (PDUs)

• Please see the HPE Basic Power Distribution Units (PDU) QuickSpecs for information on these products and their
specifications.
• Please see the HPE Metered Power Distribution Units (PDU) QuickSpecs for information on these products and their
specifications.
• Please see the HPE Intelligent Power Distribution Unit (PDU) QuickSpecs for information on these products and their
specifications.
• Please see the HPE Metered and Switched Power Distribution Units (PDU) QuickSpecs for information on these
products and their specifications.
HPE Uninterruptible Power Systems (UPS)

• To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
• Please see the HPE DirectFlow Three Phase Uninterruptible Power System QuickSpecs for information on these
products and their specifications.
• Please see the HPE Line Interactive Single Phase UPS QuickSpecs for information on these products and their
specifications.
HPE T750 Gen5 NA/JP UPS with Management Card Slot Q1F47A
HPE T750 Gen5 INTL UPS with Management Card Slot Q1F48A
HPE Rack Options

Please see the HPE KVM Switches web page for information on these products and their specifications.
Rail Kits
HPE ProLiant ML350/ML110 Gen11 T/R Conversion Kit P47394-B21
Notes:
− Easy install rack rail tray which takes up 1U height in a standard rack facility with CMA can only be shipped as standalone
option package. This kit is supported in both ML350 and ML110 Gen11 for tower to rack conversion.
− HPE rail kits are designed to work with HPE racks in compliance with industry standard EIA-310-E. In the event a
customer elects to purchase a third-party rack for use with an HPE rail kit, any such use is at customer’s own risk. HPE
makes no express or implied warranties with respect to such third-party racks and specifically disclaims any implied
warranties of merchantability and fitness for a particular purpose. Furthermore, HPE has no obligation and assumes no
liability for the materials, design, specifications, installation, safety, and compatibility of any such third-party racks with any
rail kits, including HPE rail kits.
Page 43
Additional Options
HPE GreenLake for Compute Ops Management

Base SKU
HPE GreenLake for Compute Ops Management Enhanced 3-year Upfront ProLiant SaaS R7A11AAE
Upgrade SKU
HPE GreenLake for Compute Ops Management Enhanced 5-year Upfront ProLiant SaaS R7A12AAE
HPE Compute Cloud Management Server FIO Enablement S1A05A
For more information, visit the HPE GreenLake for Compute Ops Management QuickSpecs:
https://www.hpe.com/psnow/doc/a50004263enw
Supported Servers – CTO only. No OEM. – Complete list can be found here: Latest Supported Server List:
https://www.hpe.com/info/com-supported-servers
Converged Infrastructure Management Software

HPE OneView
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU E5Y35AAE
HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU P8B26AAE
Insight Software
HPE iLO Advanced
HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features E6U59ABE
HPE iLO Advanced Electronic License with 3yr Support on iLO Licensed Features E6U64ABE
HPE iLO Advanced 1-server License with 3yr Support on iLO Licensed Features BD505A
HPE iLO Advanced Flexible Quantity License with 3yr Support on iLO Licensed Features BD506A
HPE iLO Advanced AKA Tracking License with 3yr Support on iLO Licensed Features BD507A
HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features 512485-B21
HPE iLO Advanced Flexible Quantity License with 1yr Support on iLO Licensed Features 512486-B21
HPE iLO Advanced AKA Tracking License with 1yr Support on iLO Licensed Features 512487-B21
Factory Configuration Settings

HPE iLO Common Password FIO Setting P08040-B21
Notes:
− Replaces iLO default randomized password by an HPE defined common password. HPE highly
recommends changing this password immediately after the initial onboarding process.
− Customers who want to choose their own custom iLO default password should use the HPE Factory
Express Integration Services.
Page 44
Memory
Memory Population guidelines
HPE ML110 Gen11 Server (Front of server)

Notes: 2 Slots per channel
HPE ProLiant ML110 Gen11 Servers 16 slots per CPU DIMM population order
1 DIMM 10
2 DIMMs 2
3 10
4 DIMMs2 3 7 10 14
6 DIMMs 3 5 7 10 14 16
8 DIMMs 1,2
1 3 5 7 10 12 14 16
12 DIMMs 1 2 3 5 6 7 10 11 12 14 15 16
16 DIMMs1,2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Notes:
− 1. Support SGX (Software Guard Extensions)
− 2 Support Hemi (hemisphere mode)
General Memory Population Rules and Guidelines:

• Install DIMMs only if the corresponding processor is installed. If only one processor is installed in a 2-processor system,
only half of the DIMM slots are available to populate.
• If a memory channel consists of more than one DIMM slot, the white DIMM slot is located furthest from the CPU. White
DIMM slots denote the first slot to be populated in a channel. For one DIMM per channel (DPC), populate white DIMM
slots only
• Rank mixing is not allowed on a channel except for 1 rank + 2 rank combination when all 16 DIMMs for a Processor
socket is populated. (2 rank in white slot, 1 rank in block slot),
• No x4 mixing with x8 across a socket.
• If multiple CPUs are populated, split the HPE Smart Memory DIMMs evenly across the CPUs and follow the corresponding
CPU rules when populating DIMMs.
• To maximize performance, it is recommended to balance the total memory capacity across all installed processors and
load the channels similarly whenever possible.
• If the number of DIMMs does not spread evenly across the CPUs, populate as close to evenly as possible.
• Avoid creating an unbalanced configuration for any CPU.
Page 45
Memory
• The maximum memory capacity is a function of the number of DIMM slots on the platform-----the largest DIMM capacity
qualified on the platform and the number and model of qualified processors installed on the platform.
• Do not mix HPE Smart Memory RDIMMs and HPE Smart Memory LRDIMMs in the same system.
• Rank mixing is not allowed on a channel except for 1 rank + 2 rank combination (2 rank in white slot, 1 rank in block slot),
when all 16 DIMMs for a Processor socket is populated.
• The 256 GB 8R 3DS RDIMM can be mixed with 128 GB 4R 3DS RDIMM ONLY in 16 DIMMs populated. 256 GB 8R 3DS
RDIMM needs to be in white slot while 128 GB 4R 3DS RDIMM needs to be in black slot.
• The maximum memory speed is a function of the memory type, memory configuration, and processor model.
• DIMMs of different speeds may be mixed in any order; however, the server will select the lowest common speed among all
of the DIMMs on all of the CPUs.
• HPE Smart Memory DIMMs and HPE NVDIMM-Ns from previous generation servers are not compatible with the current
generation. Certain HPE Smart Memory features such as memory authentication and enhanced performance may not be
supported.
• There are no performance implications for mixing sets of different capacity DIMMs at the same operating speed. For
example, latency and throughput will not be negatively impacted by installing an equal number of 32 GB 1rank x4 DDR5-
4800 DIMMs (in block slot) and 64 GB 2rank x4 DDR5-4800 DIMMs (in white slot).
• Take each DIMM type and create a configuration as if it were a homogeneous configuration.
• For details on the HPE Server Memory Options Population Rules, visit:
http://www.hpe.com/docs/memory-population-rules.
• For additional information, please see the HPE DDR5 Smart Memory QuickSpecs.
Notes: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/server-memory.
Page 46
Storage
8 NHP LFF drive model 8 LFF hot-plug drive model 16 SFF hot-plug drive model
Tower – shown with tower feet. Tower – shown with tower feet. Tower – shown with tower feet.
• 2 x 4LFF NHP SATA Drive Cage • 2 x 4LFF SAS/SATA hot- • 2 x 8SFF SAS/SATA hot-
Kit in Box 1/2. pluggable Drive Cage Kit in Box pluggable Drive Cage Kit in Box
• Internal RDX Docking station. 1/2. 1/2.
• Internal RDX Docking station. • Internal RDX Docking station.
Page 47
Technical Specifications
System Unit
Dimensions
• Tower
46.2 (H) x 58.7 (D) x 19.5 (W) cm
18.19 (H) x 23.1 (D) x 7.68 (W) in
• Rack – System only
19.5 (H/4.5U) x 58.7 (D) x 44.5 (W) cm
7.68 (H) x 23.1 (D) x 17.5 (W) in
• Tower-to-Rack Conversion Kit (1U)
4.445 (H/1U) x 69.2 (D/without CMA. Depth with CMA: 83.5) x 45.2 (W) cm
1.75 (H/1U) x 27.23 (D/without CMA. Depth with CMA: 32.89) x 17.795 (W) in
Weight (approximate)
• 20.1 kg (44.31 lb)
SFF Minimum:
1x 8SFF cage with 1x SFF HDD and 7x SFF HDD blanks, 1x Drive Cage blank, 1x Media Bay blanks, 1x DVD bay blank, 1x
processor including standard heatsink, 1x DIMM, 1x power supply (plus blank), 1x x8 HHHL card(Max. 166g), 1x OCP
blanks, 1x GPU Riser Cage blank, Cables for the above.
• 30.3 kg (66.8 lb)
SFF Maximum:
16x SFF HDDs with 2x SFF Drive cages, 1x DVD device, 1x processor including standard heatsink, 16x DIMMs, 2x power
supply, 1x GPU riser cage, 1x Megacell, 1x OCP, 2x Single Width x16 GPU card, 2x x8 HHHL card (Max. 166g), Cables for
the above.
• 20.4 kg (44.97 lb)
LFF Minimum:
1x 4LFF cage with 1x LFF HDD and 3x HDD blanks, 1x Drive Cage blank, 1x Media Bay blanks, 1x DVD bay blank, 1x
processor including standard heatsink, 1x DIMM, 1x power supply (plus blank), 1x x8 HHHL card (Max. 166g), 1x
Megacell, 1x OCP blanks, 1x GPU Riser Cage blank, Cables for the above.
• 33.2 kg (73.19 lb)
LFF Maximum:
8x LFF HDDs with 2x LFF Drive Cage, 1x DVD device, 1x processor including standard heatsink, 16x DIMMs, 2x power
supply, 1x GPUI Riser Cage, 1x Megacell, 1x OCP, 2x Single Width x16 GPU card, 2x x8 HHHL card(Max. 166g), 1x
NS204i-u, Cables for the above.
Input Requirements (per power supply)

Rated Line Voltage
• 100 to 120 VAC
• 200 to 240 VAC
BTU Rating
Maximum
• For 500W Power Supply: 1902 BTU/hr (at 100 VAC), 1840 BTU/hr (at 200 VAC), 1832 BTU/hr (at 240 VAC)
• For 1600W Power Supply: 5918 BTU/hr (at 200 VAC), 5884 BTU/hr (at 240 VAC
Page 48
Power Supply Output (per power supply)

Rated Steady-State Power
• For 1600W (Titanium) Power Supply: 1600W (at 240 VAC), 1600W (at 240 VDC) for China only
• For 1000W (Titanium) Power Supply: 1000W (at 100 VAC), 1000W (at 240 VAC)
• For 800W (Platinum) Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VDC) input for China only
Maximum Peak Power
• For 1600W (Titanium) Power Supply: 1600W (at 240 VAC), 1600W (at 240 VDC) for China only
• For 1000W (Titanium) Power Supply: 1000W (at 100 VAC), 1000W (at 240 VAC)
System Inlet Temperature

• Standard Operating Temperature
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above
sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr
(36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed.
System performance during standard operating support may be reduced if operating with a fan fault or above 30°C
(86°F).
• Extended Ambient Operating Temperature
For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and
35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above
900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed
at the URL:https://www.hpe.com/support/ASHRAEGen11
For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C (104° to 113°F)
at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a
maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the
URL:https://www.hpe.com/support/ASHRAEGen11
System performance may be reduced if operating in the extended ambient operating range or with a fan fault.
• Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity (non-condensing)

• Operating
8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing.
• Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing..
Altitude
• Operating
3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
• Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Page 49
Emission Classification (EMC) Regulatory Information

To view the regulatory information for your product, view the Safety and Compliance Information for Server, Storage, Power,
Networking, and Rack Products, available at the Hewlett Packard Enterprise Support Center:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03471072
Environment-friendly Products and Approach End-of-life Management and Recycling

Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many geographic areas, for
our products. Products returned to Hewlett Packard Enterprise will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by
treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard Enterprise web site.
These instructions may be used by recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise OEM
customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Acoustic Noise
Listed are the declared mean A-Weighted sound power levels (LwAm), declared average bystander position A-Weighted sound
pressure levels (LpAm) and the statistical adder for verification, Kv, is a quantity to be added to the declared mean A-weighted
sound power
level, LwA,m when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with
ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels. Please have your HPE representative provide information
from the HPE EMESC website for further technical details regarding the configurations listed below.
Test Case Entry LFF Model Entry LFF Model Entry SFF Model Base SFF Model Performance SFF
Model
Idle
LwA,m 3.7 B 3.7 B 3.7 B 3.7 B 3.7 B
LpAm 22 dBA 22 dBA 22 dBA 22 dBA 22 dBA
Kv 0.4 B 0.4 B 0.4 B 0.4 B 0.4 B
Operating
LwA,m 3.8 B 3.8 B 3.8 B 4.7 B 5.0 B
LpAm 24 dBA 24 dBA 24 dBA 31 dBA 37 dBA
Kv 0.4 B 0.4 B 0.4 B 0.4 B 0.4 B
Notes:
− The declared mean A-weighted sound power level, LWA,m, is computed as the arithmetic average of the measured.
− A-weighted sound power levels for a randomly selected sample, rounded to the nearest 0,1 B.
− The declared mean A-weighted emission sound pressure level, LpA,m, is computed as the arithmetic average of the
measured A-weighted emission sound pressure levels at the bystander positions for a randomly selected sample, rounded
to the nearest 1 dB.
− The statistical adder for verification, Kv, is a quantity to be added to the declared mean A-weighted sound power level,
LWA,m, such that there will be a 95 % probability of acceptance, when using the verification procedures of ISO 9296, if no
more than 6,5 % of the batch of new equipment, has A-weighted sound power levels greater than (LWA,m + Kv).
− The quantity, LWA,c (formerly called LwA,m), can be computed from the sum of LWA,m and Kv.
− All measurements made to conform to ISO 7779 / ECMA-74 and declared to conform to ISO 9296 / ECMA-109.
− B, dB, abbreviations for bels and decibels, respectively, where 1 B = 10 dB.
− The results in this declaration apply only to the model numbers listed above when operating and tested according to the
indicated modes and standards. A system with additional configuration components or increased operating functionality
may increase the noise emission values.
− System under abnormal conditions may increase the noise level, persons in the vicinity of the product [cabinet] for
extended periods of time should consider wearing hearing protection or using other means to reduce noise exposure.
Page 50
Summary of Changes
Date Version History Action Description of Change

01-Apr-2024 Version 13 Changed Overview, Standard Features, Pre-Configured Models, Configuration
Information and Additional Options sections were updated.
18-Mar-2024 Version 12 Changed Pre-Configured Models section was updated.
04-Mar-2024 Version 11 Changed Pre-configured SKUs, Drive and UPS options were updated.
05-Feb-2024 Version 10 Changed Drive options were updated.
08-Jan-2024 Version 9 Changed Energy Star 4.0 information and 96GB 5600 memory support limitation
were updated.
14-Dec-2023 Version 8 Changed Intel 5th Gen processors and 5600 memory options were updated
13-Nov-2023 Version 7 Changed New Pre-Configured SKU was updated
06-Nov-2023 Version 6 Changed Optimize Configuration content, add new options support.
05-Sep-2023 Version 5 Changed Optimize Configuration content, add new Lot 9 required statements
and update options sections.
17-Jul-2023 Version 4 Changed Configuration Information section was updated
10-Jul-2023 Version 3 Changed Standard Features, Pre-Configured Models, Configuration Information
and Core Options sections were updated
05-Jun-2023 Version 2 Changed Pre-Configured Models, Configuration Information and Core Options
sections were updated.
01-May-2023 Version 1 New New QuickSpecs.
Page 51
Copyright
Make the right purchase decision.

Contact our presales specialists.
Get updates
© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject
to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.
Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of
companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
a00054055enw - 16305 - Worldwide - V13 - 01-April-2024
Page 52

HPE ProLiant ML110 Gen11-A00054055enw

Uploaded by

Copyright:

Available Formats

HPE ProLiant ML110 Gen11-A00054055enw

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HPE ProLiant ML110 Gen11-A00054055enw

Uploaded by

Copyright:

Available Formats

QuickSpecs HPE ProLiant ML110 Gen11

HPE ProLiant ML110 Gen11

1. DisplayPort 1.1a 7. Power on/Standby button and system power LED

Rear View – With optional NS204i-u and riser kit shown.

Processors – One of the following, depending on model.

Intel Fourth Generation Xeon® Scalable Processors

Intel Fifth Generation Xeon® Scalable Processors

Silver 4509Y Processor 2.6 GHz 8 22.5 MB 125W 2 4400 MT/s 64 GB

System Management Chipset

Optional GPU Riser Kit

HPE ProLiant ML110 Gen11 GPU Riser Kit

Internal Storage Devices

• Intel VROC SATA for HPE ProLiant Gen11

Essential RAID Controllers

Tri-mode RAID Controllers

Operating Systems and Virtualization Software Support

Industry Standard Compliance

iLO RESTful API

HPE GreenLake for Compute Ops Management

Active Health System Viewer

iLO Amplifier Pack

RESTful Interface Tool

HPE OneView Standard

HPE OneView Advanced-

HPE InfoSight for Servers

HPE Insight Cluster Management Utility (CMU)

Accelerator and GPGPU Information

Rack and Power Infrastructure

One Config Simple (SCE)

Service and Support

HPE Managed Services

HPE Complete Care Service

HPE Tech Care Service

Service and Support

HPE Lifecycle Services

Other Related Services from HPE Services:

Defective Media Retention

Parts and Materials

How to Purchase Services

Service and Support

AI Powered and Digitally Enabled Support Experience

Consume IT On Your Terms

For more information

Pre-Configured models ship with the configurations below.

Embedded 8 SATA ports controller Embedded 8 SATA ports controller

16 GB (1x16 GB , 4800 MT/s) 16 GB (1x16 GB , 4800 MT/s) 32 GB (1x32 GB , 4800 MT/s)

Smart Choice Models

Power 2x HPE 800W Flex Slot Platinum

Smart Choice Models

Power 2x HPE 500W Flex Slot Platinum

Smart Choice Models

Country Code Key

HPE Smart Choice purchase program

Smart Templates from HPE

Workload Solutions Templates from HPE

Step 1: Base Configuration (choose one of the following configurable models)

Processor Option Kits – Intel Fourth Generation Xeon® Scalable Processors

Processor Option Kits – Intel Fourth Generation Xeon® Scalable Processors

For Gen11 memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table