2 - ZXA10 C3XX V2.1.0 Version System Training

C3XX V2.1.
0 Version Introduction
Contents
n Overview of Version Aims
n C3XX V2.1 Card Combination & New Cards
n New Functions of C3XX V2.1
n C3XX V2.1 Maintenance Improvement
n C3XX V2.1 Compatibility Considering
Overview of Version Aims Confidential▲
© ZTE All rights reserved

© ZTE Corporation. All rights reserved
3

4
• Progress of Version 2.1 Project

-Test version on site: 2016-12-15
-Designed and finalized version released: 2017-2-14
• Special Description
-As a unified upgrading version for later domestic /
International markets
-based on functions of version V1.x and V2.x
- the version has kept 2 sets of CLI/MIB unchanged used
by v1.x and v2.x in the existing network, so as to ensure
later smooth upgrading.

5

6

7
Contents
Confidential▲
C300 V2.1.0 Version Card Combination
Next-
Combina generati Next-
tion Main Sub- on GPON generation
Code Public Control card Uplink Cascade P2P card EPON card GPON EPON CES
MWEA/R HUVQ FTGKB FTGKB GTTHR ETTHR GTGOE ETGOB CTLA
MWIA/R HUTQ GDFO FTGHA GTXHR GTGOG ETGOF CTUB
PRWG GUFQ XDTO FTGKA GTBHR GTGHG ETGOD CTTB
CICK GUSQ GDFO GTCHR GTXOG ETGHG CTBB
CICG HUGQ NTXOK GTGOA ETTOB CTLAC
CICC XDTO NTTOK GTGQA ETTOD
C300-A FCWD SCXN CKWSA NTXHR GTGOC ETXDC
FCWB NTTHR GTGQC ETTQE
PRWH GTGOD ETGHK
• Blue letter are contents supported by 2.X version
MWEA GTGHK ETTOK
• Red letter are contents that 2.1 need to add
MWIA • Yellow parts are newly developed cards, not sale yet GTTOK
CICP • Grey parts are contents that are confirmed not to GTXOK
MWEA/B support GTBOK

9
Confidential▲

Next- Next-
genera genera
Combi tion tion
nation Main Sub- Cascad GPON EPON
Code Public Control card Uplink e P2P card card GPON EPON CES
MWEA/R HUVQ FTGKB FTGKB GTTHR ETTHR GTGOE ETGOB CTLA
MWIA/R HUTQ FTGHA GTXHR GTGOG ETGOF CTUB
GUFQ XDTO FTGKA GTBHR GTGHG ETGOD CTTB
CICK GUSQ GTCHR GTXOG ETGHG CTBB
CICG HUGQ NTXOK GTGOA ETTOB CTLAC
CICC XUTQ NTTOK GTGQA ETTOD
FCWD XUVQ NTXHR GTGOC ETXDC
C300-B SCTMB XDTO NTTHR GTGQC ETTQE
PRWH GTGOD ETGHK
CICP GTGHK ETTOK
MWEA/B • Blue letter are contents supported by 2.X version GTTOK
• Red letter are contents that 2.1 need to add GTXOK
• Yellow parts are newly developed cards, not sale yet GTBOG
• Grey parts are contents that are confirmed not to GTBOK
MWIA/B support
10
Confidential▲
Combi
nation Main Sub- Cascad
Code Public Control card Uplink e P2P GPON EPON CES
MWEA/R HUVQ FTGKB FTGKB GTGOE ETGOB CTLA
MWIA/R HUTQ GDFO FTGHA GTGOG ETGOF CTUB
PRWG GUFQ XDTO FTGKA GTGHG ETGOD CTTB
PRWH GUSQ GTXOG ETGHG CTBB
CICK HUGQ GTGOA ETXDC CTLAC
CICG XDTO GTGQA ETTQE
CICC gutq GTGOC ETTOD
C300-C SCXM
FCWD XUVQ GTGQC ETGHK
FCWB GTGOD ETTOK
MWEA GTGHK
MWIA GTTOK
• Yellow parts are newly developed cards, not sale yet
CICP • GTBOK
Grey parts are contents that are confirmed not to
MWEA/B support GTXOK
MWIA/B © ZTE All rights reserved
11
Confidential▲

Next- Next-
generat generat
Combin ion ion
ation Main Sub- Cascad GPON EPON
Code Public Control card e P2P card card GPON EPON CES
MWMT SMXA UCDC/1 FTGKB FTGKB GTGOE ETGOD
SMXA
(PCB
F2U 131201) UCDC/2 GTGOG ETGOF
C320 FL2U UCDC/3 GTGHG ETGHG
PRAM UCDC/4 GTXOG ETTOD
UCDCE GTGHK ETGHK
• Blue letter are contents supported by 2.X version GTTOK ETTOK
• Red letter are contents that 2.1 need to add GTBOK
• Grey parts are contents that are confirmed not to
support
12
Confidential▲

Next- Next-
generat generat
Combin ion ion
ation Main Sub- GPON EPON
Code Public Control card Uplink Cascade P2P card card GPON
MWRV HUTQ FTGKB FTGKB GTGHG
PRWG GUFQ GTGOG
PRWGS GTXOG
C350-A SCXN
PRWH GTGHK
GTTOK
• Red letter
CICK are contents that 2.1 need to add GTBOK
support

13
Confidential▲

Combin
ation Main Sub-
Code Public Control card Uplink Cascade P2P GPON
MWRV XUTQ FTGKB FTGKB GTGHG
PRWH XUVQ GTGOG
HUVQ GTXOG
C350-B SCTMB
GTGHK
GUSQ GTTOK
CICK HUTQ GTBOK

support
14
Confidential▲
New Type K Line Cards

Card Name Version Name Optical Module Types Supported
GTGHK GTXK_LX.MVR/GTXK.fw/GTXK.bt GPON optical module
ETGHK ETXK_LX.MVR/ETXK.fw/GTXK.bt EPON optical module
ETTOK ETXK_LX.MVR/ETXK.fw/GTXK.bt Asymmetric 10G-EPON optical module

Symmetric 10G-EPON optical module
GTTOK GTXK_LX.MVR/GTXK.fw/GTXK.bt XGSPON optical module
XGPON1 optical module
GTXOK GTXK_LX.MVR/GTXK.fw/GTXK.bt XGPON1 optical module
GTBOK GTXK_LX.MVR/GTXK.fw/GTXK.bt XGPON1/GPON integrated optical module

15
Confidential▲
Main Control card SCTMB/SCXNT00

16
Confidential▲
When using SCXNT00/SCXN Main Control card to deploy 10G EPON/10 GGPON
services, 10G EPON/10G GPON line card need to be used to realize. During engineering
commissioning process, also pay attention below points:
• Grounding
• Cooling, the SCXNT00 is SCTMB, this card will auto reboot quickly if high
temperature
• The power consumption of SCXNT00 is 100~120W, while that of old SCXN card is
60~75W.

17
Confidential▲
Before the software version of SCXNT00 delivered by Unicom is C300V1.2.5P3T80, the 2.1 version is available
now.
In SCXN card +V1.2.5P3 version, both CfgType and RealType are SCXN, as
shown as below:
ZXAN#show card
Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status
-------------------------------------------------------------------------------
1 1 0 PRWG N/A 090301 HWONLINE
1 1 6 GTGH GTGHG 16 120700 V1.2.5P3 INSERVICE
1 1 7 ETGO ETGOB 8 090500 V1.2.5P3 INSERVICEIn SCXNT00+V1.2.5P3T80 version, CfgType is SCXNT, while RealType
1 1 8 GTXO GTXOG 8 121201 V1.2.5P3 INSERVICEis SCXNT00, as shown as below:
1 1 9 ETTQ ETTQE 4 100901 V1.2.5P3 INSERVICE ZXAN#show card
1 1 10 SCXN N/A OFFLINE Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status
1 1 11 SCXN SCXN N/A 120902 V1.2.5P3 INSERVICE-------------------------------------------------------------------------------
1 1 1 PRWG PRWG 0 V1.0.0 INSERVICE
1 1 9 ETGO ETGOD 8 V1.0.0 V1.2.5P3 INSERVICE
1 1 10 SCXNT SCXNT00 5 V1.0.0 V1.2.5P3 STANDBY
1 1 11 SCXNT SCXNT00 5 V1.0.0 V1.2.5P3 INSERVICE
1 1 17 ETTO ETTOB00 8 V1.0.0 V1.2.5P3 INSERVICE
1 1 19 XUTQ XUTQ 4 V1.0.0 V1.2.5P3 INSERVICE
1 1 20 XUVQ XUVQ 4 V1.0.0 V1.2.5P3 INSERVICE
18
Confidential▲
C300V1.2.5P3T80 is the special version to support SCXNT00 hardware type in current C300V1.2.X version,now
C300V2.1 version also support SCXNT00. We can use below command to check detail version information.
ZXAN (diag)#show-version-running-detail
PhyLoc FileType VerType VerTag BuildTime VerLength
---------------------------------------------------------------------------------------------------------
1/1/9 ETGO MVR V1.2.5P3T80 2016-07-01 01: 21: 27 5976916
1/1/9 ETGOD BT V4.0.10 2015-12-03 10: 22: 49 253856
1/1/10 SCXNT MVR V1.2.5P3T80 2016-07-01 01: 28: 53 31219812
1/1/10 SCXNT BT V4.0.11 2016-06-29 15: 55: 22 333440
1/1/10 SCXNT FW V1.2.5P3T80 2016-07-01 01: 28: 58 1568250
1/1/11 SCXNT MVR V1.2.5P3T80 2016-07-01 01: 28: 53 31219812
1/1/11 SCXNT BT V4.0.11 2016-06-29 15: 55: 22 333440
1/1/11 SCXNT FW V1.2.5P3T80 2016-07-01 01: 28: 58 1568250

19
Confidential▲

20
Confidential▲
10G-EPON&XG-PON Card

21
Confidential▲

22
Confidential▲

23
Confidential▲
Power card for 10G-EPON&XG-PON

To expand ETTO/GTXO cards, power cards and fan plug-in boxes need to be replaced. Engineering
applications are described respectively as below:
PRWG is old type power card, if use 10G card at maximum, suggest to change PRWH. The new
PRWH can support display voltage and current in CLI mode, also it support high power consumption.

24
Confidential▲
Power card for 10G-EPON&XG-PON

25
Confidential▲
FAN Unit for 10G-EPON&XG-PON

26
Contents
Functions of V2.1.0 Version Confidential▲
Based on 2.0.1p3+V1.2.X, V2.1.0 version has already realized following functions, and new market demands.
Function Description
PON function Support EPON/10G EPON; GPON/10G GPON are commercialized in the market
Main control card C300 SCXM/SCXL/SCXN/SCTM;
C320 SMXA
C350 SCTM (require to support line cards GTGOG/GTGHG/GTXOG/FTGKB/XUTQ)
Main control card SCXL Active / standby working mode
working mode SCXM Active / standby working mode
SCXN/SCTM SCTMB adopts load balance working mode by default, SCXN adopts active / standby
mode by default, and can switch between active / standby and load balance working
modes via CLI.
SMXA C320 adopts load balance mode by default
MIB consistency demand Keep 2 sets of MIB unchanged used by V1.2.5 and 2.X in the existing network. Need to change in OLT to
support this function.
CLI consistency demand Keep 2 sets of CLI unchanged used by V1.2.5 and 2.X in the existing network. If some CLI is changed,
after upgrding from V1 to V2, it will auto change to new CLI command.

28
Confidential▲
Working Modes of Main Control Cards

OLT Type C300 C320 C350
Control card SCTMB SCXN SCXL SCXM SMXA SCTMB SCXN
Whether to Support Support Not support Not Support Support Support Support
support load
balance mode
Whether to Support Support Support Support Not support Support Support
support
active/standby
mode
Default mode Load balance Active/standb Active/standb Active/standb Load balance Load balance Load balance
mode y mode y mode y mode mode mode mode
ZXAN (config)#load-balance enable

You must write and restart your system for the configuration changes to take effect! Confirm to execute? [yes/no]:
ZXAN (config)#load-balance disable
You must write and restart your system for the configuration changes to take effect! Confirm to execute? [yes/no]:

29
Confidential▲
Load Balance Mode function

-SCTMB control card
-Slot 10 work as Master, slot 11 work as Slave.
-System work as Load Balance Mode. So the User
will be sent to slot 10 or slot 11 according to MAC
HASH.
If Slot 11 change to HWONLINE mode, the user 2

traffic will be broken. We can forbid sending
traffic to slave card to solve this problem. After
slot 11 change to standby, then change back.
ZXAN(config)#prohibit-slave
ZXAN(config)#no prohibit-slave

30
Uplink ports in SCXN/SCTMB Panel Confidential▲
-Uplink ports in SCXN panel is conflict with uplink card ethernet ports. So it is not suggest to use
SCXN panel uplnik ports.
-Uplink ports in SCTMB panel can work with uplink card ethernet ports.
-If use panel uplink ports, the system should work as load balance mode.

31
Because the master card will reset itself during the swap.Don't use just one uplink port in master card.
Smartgroup

32
Don't use uplink ports just in master card. It's strongly recommended to use uplink ports in Master and Slave card,
and at least one port in each card.
Smartgroup Smartgroup

33
Use same uplink ports numbers in each control card.
Smartgroup Smartgroup

34
Confidential▲
Uplink ports in SCXN/SCTMB Panel
Function Description
①1588 time source protection function
a. Multiple time sources, that is, support 2 *1588 source servers + 2 *1PPS+TOD inputs
b. Time source priorities can be configured, support to process clock source level, prefer and switch-
over time sources according to priorities
Time synchronization
c. Support time switching without loss, ONU jitter is less than 50ns
1588 function
②OLT supports to transfer time level to inferior equipment, including PON and P2P Ethernet, so that
downstream equipment can choose and switch time source;
③Support time function-related alarms and time, including time source level change, time source
switching notification, time source loss and so on
①The receiving direction processes 1PPS+TOD clock level, prefers and transfers, 1PPS+TOD is converted
into PON corresponding time message within the OLT to be transferred to the ONU or adopt standard
1588V2 to transfer downwards to the downstream equipment via Ethernet port
Time synchronization ②OLT supports to transfer time level to inferior equipment, including PON and P2P Ethernet, so that
1PPS+TOD transferring downstream equipment can choose and switch time source;
③Support time source switching between 1PPS+TOD without loss, ONU jitter is less than 50ns
④Support corresponding time alarm and event
①Software configures input clock source
Frequency ②Be able to automatically choose clock source according to clock source level information or manually
synchronization specify priority
SyncE ②OLT supports to transfer time level to inferior equipment, including PON and P2P Ethernet, so that
downstream equipment can choose and switch time source
35
Contents
Confidential▲
Package Function

37
Confidential▲
Package Function
ZXAN#show patch-running
Position PatchFile VerTag ActiveTime Status
--------------------------------------------------------------------------------------------------
1/1/4 gtgocv210t37_r1.pat V2.1.0 2000-01-01 08:00:00 Waiting
1/1/8 gtgoav210t37_r5.pat V2.1.0 2019-06-10 13:33:34 Success
1/1/8 gtgoav210t37_r10.pat V2.1.0 2019-06-24 10:24:34 Reset

38
Confidential▲
Package Function

39
Confidential▲
Maintenance Improvement (CLI)
GTGO/GTGH:
ZXAN#show pon bandwidth dba interface gpon-olt_1/7/1
interface channel configured(kbps) free(kbps) rate(x.x%)
---------------------------------------------------------------------------------------------
gpon-olt_1/7/1 1(GPON) 103072 1141088 8.3
GTBO:
ZXAN#show pon bandwidth dba interface gpon-olt_1/15/1
interface channel configured(kbps) free(kbps) rate(x.x%)
-----------------------------------------------------------------------------------------------------------
gpon-olt_1/15/1 1(XG-PON1) 18640 2469680 0.7
gpon-olt_1/15/1 2(GPON) 0 1244160 0.0
Notice:The Maximum speed is 1000000kbps, not 1244160. It will change correct in later
package.

40
Confidential▲
ZXAN(config)#show pon power olt-rx gpon-olt_1/4/1

Onu Rx power
------------------------------------
gpon-onu_1/4/1:1 N/A
Notice:The OLT rx power should higher then -27dBm.

41
Confidential▲
ZXAN#show pon onu offline information gpon-olt_1/4/1

ONU Recent 1 day Current 1 day Recent 1 hour Current 1 hour
-------------------------------------------------------------------------------
1/4/1:1 0 0 0 0
1/4/1:2 0 0 0 0
1/4/1:3 0 0 0 0
1/4/1:4 0 0 0 0
-Recent 1 day means 0 clock to 24 clock.

-Fox example,I3:50 is current time.Current 1 day
means 13:50(yesterday) to 13:50(today).

42
Confidential▲
ZXAN#show card type gpon

Position : 1/1/8
Type : GTGO Real Type : GTGOA
Status : INSERVICE Port Number : 8
Memory Size : 256MB CPU Type : PowerPC Processor
CPU Usage : 5% Memory Usage : 62%
Serial Number : PCB Version : 080802
CPLD Version : V1.8
Boot Version : V4.0.10 2015-12-03 10:13:42
Software Version : V2.1.0 2017-01-17 00:37:13
Board Up Time : 10 Days, 0 Hours, 28 Minutes, 59 Seconds
Position : 1/1/12
Type : GTXO Real Type : GTXOG
Status : INSERVICE Port Number : 8
Memory Size : 512MB CPU Type : PowerPC Processor
CPU Usage : 19% Memory Usage : 36%
Serial Number : 702246100122 PCB Version : 121201
CPLD Version : V1.2
Boot Version : V4.0.16 2018-05-09 0:52:06
Software Version : V2.1.0 2017-01-17 00:43:09
Board Up Time : 10 Days, 0 Hours, 28 Minutes, 44 Seconds
43
Confidential▲
ZXAN(config)#show card If we change a GTGOG card to

Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status GTGOK card, there is no need to
--------------------------------------------------------------------------------------------- delete card and add a new card.
But if we change a GTGO card
to GTGH or GTXO, we need to
1 1 1 PRWG PRWG 0 V1.0.0 NOPOWER
delete old card and add new
1 1 5 GTGO 8 OFFLINE card. If we delete card, all the
ZXAN(config)#del-card slot 5 //All the configuration in this slot will be deleted also configuration will be deleted
Confirm to delete card? [yes/no]:y together. In V2.1 we add a new
ZXAN(config)#add-card slot 5 GTGH command modify to change
card type by “delete and add
ZXAN(config)#show card
card”, the configuration will not
Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status
be deleted.
---------------------------------------------------------------------------------------------
1 1 1 PRWG PRWG 0 V1.0.0 NOPOWER
1 1 5 GTGH 16 OFFLINE
44
Confidential▲
ZXAN(config)#show card Automatically match and support

Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status configuration type modified (only
--------------------------------------------------------------------------------------------- card type configurations listed in
the following table can be
changed to each other), do not
1 1 1 PRWG PRWG 0 V1.0.0 NOPOWER support type configuration
1 1 5 GTGO 8 OFFLINE command, and there won't pop
ZXAN(config)#modify-card slotno 5 GTGH up the type configuration dialog
Successfully! Please using show last-modify-card command to check box
• ETGO <-> ETGH
result and wri
• ETGO<-> ETTO
te command to make the new configuration effective! • GTGO<-> GTGH
• GTGO <-> GTXO <-> GTBO <-> GTTO
<-> GTGO

45
Confidential▲
A．write the configuration.

no power-enable function is to cut
B．no power-enable slot x //x is the card slot number which will the power for the card remotely, it
change to new card type. If the card status is offline, no need step B. is available for pon card only.
C．modify-card slot x y //x is the card slot number which will
change to new card type. Y is the new card type.
D．Plugout old card and insert new card.
E．power-enable slot x //x is the card slot number which will
change to new card type.
F．If other slot cards need to be modified, do the other slot from Step
A-E again.
G．After all modified, do write.
H．Reset-card slot z //Z is standby control card

46
Confidential▲
Improve Maintainability (Suspension Files Recored)
• Support to generate suspension files under the situations listed as below:
1) Task suspension;
2) Endless loop;
• Suspension files will be saved based on original record register, stacking and
memory information:
1) Last 3 internal messages processed by the task
2) Last 10 pieces of CLI operations processed by the system
3) Last 10 pieces of snmp mib operations processed by the system
4) Last 10 pieces of alarms or notifications processed by the system
5) Tasks scheduled of the task previously and internal messages processed
ZXAN(config)#show file emergency
Directory of data:
attribute size date time name If control card is stuck, click RST
-rwx 32094 DEC-14-2018 09:12:24 001.zteb button to SWAP the system. If
-rwx 386 DEC-12-2018 08:11:42 001201.usr SWAP not working, click RST
-rwx 386 DEC-12-2018 14:18:22 001201.usrb buttion on another control card.
ZXAN#file upload emergency *.*
Uploading file to host(10.63.173.22)
Uploading file mapinfo_current.bin ...
......Successfully © ZTE All rights reserved
47
Confidential▲
Improve Maintainability (Show ONU Registration Status)
ZXAN#show gpon onu baseinfo gpon-olt_1/8/3
OnuIndex Type Mode AuthInfo State
-------------------------------------------------------------------------------
gpon-onu_1/8/3:1 ZTE-F601 loid SN:-/LOID:1111111111 ready
gpon-onu_1/8/3:2 ZTE-F621 sn SN:ZTEGC003D8E4 ready
ZXAN#show pon onu information gpon-olt_1/8/3

MAC LLID Offline
ONU SN report ONU ID Auth configuration State times
-------------------------------------------------------------------------------
1/8/3:1 SN(unknown) N/A LOID(1111111111) OffLine 0
1/8/3:2 SN(ZTEGC003D8E N/A SN(ZTEGC003D8E4) OffLine 0

48
Confidential▲
CPU Packet Capturing

V2.1 version support CPU mirror remotely, the capture maximu is 5MB, the new packets
will overwrite the old ones.This function is used to analyze the protocol packets. Don't use
for big traffice service.Capture the CPU packets in user slots.
ZXAN#diagnose
Test Command Password: //password zxr10
ZXAN(diag)#
ZXAN(diag)#snatch-cpu-packet slot 2 enable //start to capture
ZXAN(diag)#snatch-cpu-packet slot 2 disable //stop to capture
ZXAN(diag)#write snatch-packet slot 2 //save the file
ZXAN(diag)#exit
Normally, the protocol packets include igmp , pppoe, dhcp,etc. If the user card cpu get the
protocol, we can capture in the file.

49
Confidential▲
CPU Packet Capturing

50
Confidential▲
Broadcast Limit in ONU interface
This packets limit will be set to all the inner-port.

51
Confidential▲
ARP limit :only GTGHK, GTTOK, GTXOK

support this limit function.
IGMP limit :only GTGOG、GTGHG、
GTGHK、GTTOK、GTXOK support this
limit function.

52
Confidential▲
broadcast limit :only GTGOG、GTGHG、GTGHK、GTTOK、GTXOK support

this limit function.

53
Confidential▲
Suspend-reboot configuration
ZXAN(config)#system-monitor task-suspend-reboot slotno 11 fatal
ZXAN(config)#show system-monitor
Loc Cfg Real Watchdog Duration suspendReboot endlessDuration Reboot
---------------------------------------------------------------------------------------------------------------------
1/1/06 CTLA CTLA disable 5 all 75 disable
1/1/08 GTGO GTGOA disable 5 all 75 disable
1/1/11 SCXM SCXM enable 5 fatal 75 disable
1/1/12 GTXO GTXOG disable 5 all 75 disable
1/1/13 ETTO ETTOD disable 5 all 75 disable
1/1/14 ETTO ETTOD disable 5 all 75 disable
1/1/18 CICG CICG disable 5 all 75 disable
1/1/19 GUSQ GUSQ disable 5 all 75 disable
Fatal: means if fatal task suspend, the system will auto reset.
All: means if any task suspend, the system will auto reset.
It is recommended to set watchdog enable for control card.

54
Confidential▲
Suspend files collection

ZXAN(config)#show file emergency
Directory of data:
attribute size date time name
-rwx 32094 DEC-14-2018 09:12:24 001.zteb
-rwx 386 DEC-12-2018 08:11:42 001201.usr
-rwx 386 DEC-12-2018 14:18:22 001201.usrb
-rwx 386 DEC-12-2018 08:13:12 001202.usr
ZXAN(config)#file boot-server ftp ipaddress 10.63.173.22 user zte password zte
ZXAN(config)#show file-server boot-server
ServerIndex : 1
ProtocolType: Ftp Server-IpAddr: 10.63.173.22
Username : zte
Password : ********
Path :
ZXAN#file upload emergency *.*
Uploading file to host(10.63.173.22)

55
Confidential▲
Diagnose log collection

ZXAN#write dbglog all ?
mp write at main mp processor
slot Np slot(not for main processor)
ZXAN#show file log-dbg
Directory of N/A:
attribute size date time name
-rwx 23477 JUN-24-2019 13:01:20 dbglog.csv
-rwx 4206 MAR-12-2019 01:05:56 diaglog-linecard.log
-rwx 181956 FEB-23-2019 05:13:56 diaglog-main.log
Current directory 3 files total
Total disk size: 126664704 bytes (15179776 bytes free)
ZXAN#file upload log-dbg *.*

56
Contents
Confidential▲
Compatibility Considering
1. In principle, configuration files used in the existing network must be compatible; if

not compatible, you need to confirm after upgrading. Use show config-load-fail to
check if configuration is lost.
2.International markets, such as ETB, Singapore. Specific usage mods of PCCW need to
be collected to test in the headquarter before upgrading.
XZ-CN-OLT-1.MAN.C300#show config-load-fail
Interpt Error cmd line 29987:'snmp-server enable trap SNMP'
Interpt Error cmd line 29988:'snmp-server enable trap VPN'
Interpt Error cmd line 29989:'snmp-server enable trap BGP'

58
Confidential▲
interface gpon-onu_1/2/4: 1 interface gpon-onu_1/2/4: 1

tcont 1 name default profile default tcont 1 name default profile default
gemport 1 name default tcont 1 gemport 1 name default tcont 1
performance gemport 1 start performance gemport 1 start
switchport mode trunk vport 1 switchport mode trunk vport 1
switchport vlan 51 tag service-port 1 vport 1 user-vlan 51 transparent
Upgrading Version 2.1

59
Confidential▲
show cpe information gpon-olt_1/4/1 1 show remote-unit information gpon-olt_1/1/2 1

gpon-onu_1/1/2: 1 Upgrade Version 2.1 gpon-onu_1/1/2: 1
RuVendorName : ZTEG RuVendorName : ZTEG
RuType : F611 RuType : F611
Region 1 Region 1
Vertag : V2.0.0P2T5S Vertag : V2.0.0P2T5S
Commited : No Commited : No
Activated : No Activated : No
Valid : Yes Valid : Yes
Region 2 Region 2
Vertag : V1.10.00 Vertag : V1.10.00
Commited : Yes Commited : Yes
Activated : Yes Activated : Yes
Valid : Yes Valid : Yes

60
Confidential▲
show cmdlogfile show logging cmdlog

vty0 zte@10.60.161.26 09:38:24 Upgrade Version 2.1 Max cmdlog number is 1000
05/10/2001 UTC show card Current cmdlog number is 712
vty0 zte@10.60.161.26 09:38:20 Current cmdlog precent is 71.20%
05/10/2001 UTC /*** user log in ***/ con0 13:33:21 Mon Jun 10 2019 BeiJing /*** user
con0 06:47:58 05/10/2001 UTC /--- user log in ***/
log out ---/ con0 13:48:23 Mon Jun 10 2019 BeiJing /--- user
con0 06:44:57 05/10/2001 UTC log out ---/
telnet0 zte800 13:57:53 Mon Jun 10 2019 BeiJing
10.92.103.25 /*** telnet u
ser log in ***/
telnet0 zte800 13:57:55 Mon Jun 10 2019 BeiJing
10.92.103.25 show card
telnet0 zte800 13:58:00 Mon Jun 10

61
Confidential▲
show snmplogfile show logging snmplog

09:41:09 05/10/2001 UTC Upgrade Version 2.1 Max snmplog number is 1000
10.63.204.119 get sysdescr Current snmplog number is 1000
request-id:3724 Current snmplog precent is 100.00%
09:41:09 05/10/2001 UTC snmp public 10:13:34 Thu Jun 20 2019 BeiJing
10.63.204.119 get sysname 10.63.173.181 get-next zxAnC
request-id:3724
snmplog function need to enable in C300 system:

ZXAN(config)#logging snmplog enable
ZXAN(config)#show logging configuration
logging exc-event auto-write enable
logging alarmlog enable
logging level notification
logging cmdlog enable
logging snmplog enable
logging igmplog disable

62
Confidential▲
1.SET of third-party EMS must be compatible. Domestic markets involves

Jiang Su and Xin Jiang, International markets involves RDS and others.
2.GET mainly involves statistics/state, which also needs to be collected, if it
can be collected, it is compatible.
3.If GET can't work, feedback detail information.
4.TRAP should be compatible.
In order to solve the thiry-party EMS problem, V2.1 can support V1.x and
V2.x mib at the same time for most mib oid.

63
Confidential▲

64
Confidential▲

65
谢谢！

2 - ZXA10 C3XX V2.1.0 Version System Training

Uploaded by

Copyright:

Available Formats

2 - ZXA10 C3XX V2.1.0 Version System Training

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2 - ZXA10 C3XX V2.1.0 Version System Training

Uploaded by

Copyright:

Available Formats

C3XX V2.1.

© ZTE All rights reserved

© ZTE All rights reserved

• Progress of Version 2.1 Project

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

C300 V2.1.0 Version Card Combination

C320 V2.1.0 Version Card Combination

C350 V2.1.0 Version Card Combination

© ZTE All rights reserved

C350 V2.1.0 Version Card Combination

PRWH XUVQ GTGOG

CICK HUTQ GTBOK

New Type K Line Cards

GTGHK GTXK_LX.MVR/GTXK.fw/GTXK.bt GPON optical module

ETGHK ETXK_LX.MVR/ETXK.fw/GTXK.bt EPON optical module

ETTOK ETXK_LX.MVR/ETXK.fw/GTXK.bt Asymmetric 10G-EPON optical module

GTBOK GTXK_LX.MVR/GTXK.fw/GTXK.bt XGPON1/GPON integrated optical module

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

Power card for 10G-EPON&XG-PON

© ZTE All rights reserved

Power card for 10G-EPON&XG-PON

© ZTE All rights reserved

FAN Unit for 10G-EPON&XG-PON

© ZTE All rights reserved

© ZTE All rights reserved

Working Modes of Main Control Cards

ZXAN (config)#load-balance enable

© ZTE All rights reserved

Load Balance Mode function

If Slot 11 change to HWONLINE mode, the user 2

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

Use same uplink ports numbers in each control card.

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

© ZTE All rights reserved

Maintenance Improvement (CLI)

© ZTE All rights reserved

Maintenance Improvement (CLI)

ZXAN(config)#show pon power olt-rx gpon-olt_1/4/1

Notice:The OLT rx power should higher then -27dBm.

© ZTE All rights reserved

Maintenance Improvement (CLI)

ZXAN#show pon onu offline information gpon-olt_1/4/1

-Recent 1 day means 0 clock to 24 clock.

© ZTE All rights reserved