Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    RPEI Full en Metric Letter

    Uploaded by

    essam
    This document describes an electro-proportionally controlled, normally-closed pressure regulating valve. The valve is spring biased closed to its highest setting, which can be customized. Increasing current to the coil will proportionally decrease the pressure setting. When inlet pressure overcomes the spring force minus solenoid force, the poppet lifts and allows flow from inlet to outlet ports. Technical specifications include a maximum operating pressure of 350 bar and maximum leakage of 30 cc/min at 70 bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RPEI Full en Metric Letter

    Uploaded by

    essam
    16 views4 pages
    This document describes an electro-proportionally controlled, normally-closed pressure regulating valve. The valve is spring biased closed to its highest setting, which can be customized. Increasing current to the coil will proportionally decrease the pressure setting. When inlet pressure overcomes the spring force minus solenoid force, the poppet lifts and allows flow from inlet to outlet ports. Technical specifications include a maximum operating pressure of 350 bar and maximum leakage of 30 cc/min at 70 bar.

    Original Title

    RPEI_full_en_metric_letter

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes an electro-proportionally controlled, normally-closed pressure regulating valve. The valve is spring biased closed to its highest setting, which can be customized. Increasing current to the coil will proportionally decrease the pressure setting. When inlet pressure overcomes the spring force minus solenoid force, the poppet lifts and allows flow from inlet to outlet ports. Technical specifications include a maximum operating pressure of 350 bar and maximum leakage of 30 cc/min at 70 bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views4 pages

    RPEI Full en Metric Letter

    Uploaded by

    essam
    This document describes an electro-proportionally controlled, normally-closed pressure regulating valve. The valve is spring biased closed to its highest setting, which can be customized. Increasing current to the coil will proportionally decrease the pressure setting. When inlet pressure overcomes the spring force minus solenoid force, the poppet lifts and allows flow from inlet to outlet ports. Technical specifications include a maximum operating pressure of 350 bar and maximum leakage of 30 cc/min at 70 bar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MODEL Electro-proportional relief valve - high pressure setting with no command

    RPEI SERIES 1 / CAPACITY: 95 L/min. / CAVITY: T-13A

    sunhydraulics.com/model/RPEI

    This 2-port, pilot-operated relief cartridge is an electro-proportionally controlled, normally-closed pressure regulating
    valve. The valve is spring biased closed to its highest setting (customer specified). Increasing current to the coil will
    proportionally decrease the pressure setting. When the pressure at port 1 (inlet) is sufficient to overcome the spring
    force minus the solenoid force, as determined by the analog input signal, the poppet lifts and allows flow from port
    1 to port 2 (outlet).

    TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

    Cavity T-13A
    Series 1
    Capacity 95 L/min.
    Factory Pressure Settings Established at 15 L/min.
    Maximum Operating Pressure 350 bar
    Maximum Valve Leakage at 110 SUS (24 cSt) 30 cc/min.@70 bar
    Valve Hex Size 22,2 mm
    Valve Installation Torque 41 - 47 Nm
    Adjustment Screw Internal Hex Size 3,2 mm
    Locknut Hex Size 11,1 mm
    Locknut Torque 5 - 6 Nm
    U.S. Patent # 10,775,812
    Seal kit - Cartridge Buna: 990010007
    Seal kit - Cartridge Viton: 990010006
    Seal and nut kit - Coil Viton: 990740006
    Model Weight 0.24 kg.

    PROPORTIONAL PERFORMANCE DATA

    Hysteresis (with dither) A-Range: 9%, W-Range: 10%


    Linearity (with dither) A-Range: 3%, W-Range 5%
    Repeatability (with dither) 3%
    Recommended dither frequency 110 Hz
    Deadband, nominal (as a percentage of input) 35%

    NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.
    An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.

    c 2021 Sun Hydraulics 1 of 4


    CONFIGURATION OPTIONS Model Code Example: RPEILAN
    CONTROL (L) ADJUSTMENT RANGE (A) SEAL MATERIAL (N) COIL *
    L Standard Screw Adjustment A 1500 - 3000 psi (105 - 210 bar), 3000 N Buna-N No coil
    psi (210 bar) Standard Setting V Viton * Additional coil options are available
    W 3000 - 5000 psi (210 - 350 bar), 5000
    psi (350 bar) Standard Setting

    TECHNICAL FEATURES
    The setting represents the maximum relief pressure which the valve will default to with no command. As the command increases, the relief setting will decrease.
    See performance curves for selected pressure range.
    Varying the analog input signal to the proportional solenoid provides a step-less control of pressure.
    Damped construction provides stable operation over a wide range of operating conditions.
    For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
    This cartridge utilizes 740 Series low-power and high-power coils, and 747 Series hazardous location coils.
    All configurations of this valve include zinc-nickel plating as standard for 1000-hour salt fog protection.
    Coil connector options offer ratings up to IP69K. See individual coil product pages for details.
    This valve is fully compatible with the XMD Expandable Mobile Drivers from Sun.
    The preferred mounting configuration is horizontal or vertically with the coil down. The valve can be mounted coil up if it is installed below reservoir oil level to
    prevent air accumulation in the solenoid tube. Do not actuate the valve manually or electrically when the valve is not installed.
    Coils can be mounted on the tube in either direction.
    Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
    machining variations.

    PERFORMANCE CURVES

    c 2021 Sun Hydraulics 2 of 4


    c 2021 Sun Hydraulics 3 of 4
    c 2021 Sun Hydraulics 4 of 4

    You might also like