Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    2FC1

    Uploaded by

    Jefferd Paet
    This document summarizes the design of a reinforced concrete member with the following key details: - The member has dimensions of 200mm x 300mm and is 3.2m in both span directions. - Material strengths are specified for concrete (21 MPa), reinforcement (275 MPa), and ties (217 MPa). - Analysis results in axial and shear forces to be resisted by the member. - Reinforcement is designed and checked for capacity including rebar size, cover, and development. - Checks are performed for slenderness, moment magnification, minimum reinforcement, design moment capacity, and shear capacity. Diagrams show the member resisting an axial load-moment interaction.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    2FC1

    Uploaded by

    Jefferd Paet
    18 views4 pages
    This document summarizes the design of a reinforced concrete member with the following key details: - The member has dimensions of 200mm x 300mm and is 3.2m in both span directions. - Material strengths are specified for concrete (21 MPa), reinforcement (275 MPa), and ties (217 MPa). - Analysis results in axial and shear forces to be resisted by the member. - Reinforcement is designed and checked for capacity including rebar size, cover, and development. - Checks are performed for slenderness, moment magnification, minimum reinforcement, design moment capacity, and shear capacity. Diagrams show the member resisting an axial load-moment interaction.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a reinforced concrete member with the following key details: - The member has dimensions of 200mm x 300mm and is 3.2m in both span directions. - Material strengths are specified for concrete (21 MPa), reinforcement (275 MPa), and ties (217 MPa). - Analysis results in axial and shear forces to be resisted by the member. - Reinforcement is designed and checked for capacity including rebar size, cover, and development. - Checks are performed for slenderness, moment magnification, minimum reinforcement, design moment capacity, and shear capacity. Diagrams show the member resisting an axial load-moment interaction.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    18 views4 pages

    2FC1

    Uploaded by

    Jefferd Paet
    This document summarizes the design of a reinforced concrete member with the following key details: - The member has dimensions of 200mm x 300mm and is 3.2m in both span directions. - Material strengths are specified for concrete (21 MPa), reinforcement (275 MPa), and ties (217 MPa). - Analysis results in axial and shear forces to be resisted by the member. - Reinforcement is designed and checked for capacity including rebar size, cover, and development. - Checks are performed for slenderness, moment magnification, minimum reinforcement, design moment capacity, and shear capacity. Diagrams show the member resisting an axial load-moment interaction.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 4

    ■ MEMBER NAME : 2FC1

    1. General Information
    (1) Design Code : ACI318M-14
    (2) Unit System : N, mm

    2. Material
    (1) : 21.00MPa
    (2) : 275MPa
    (3) : 217MPa

    300

    200

    3. Section
    (1) Section Size : 200 x 300mm
    (2) : 3.200m
    (3) : 3.200m
    (4) : 0.500
    (5) : 0.500
    (6) Splicing Limit : 50%
    (7) Frame Type : Braced Frame

    4. Forces
    (1) : 32.36kN
    (2) : 28.98kN·m
    (3) : 8.840kN·m
    (4) : 5.380kN
    (5) : 14.71kN
    (6) : 32.36kN
    (7) : 32.36kN

    5. Factors
    (1) : 0.600
    (2) : 0.600
    (3) : 0.600
    6. Rebar
    (1) Main Bar
    ㆍ Layer-1 = = 1,207mm² )
    ㆍ Layer-2 :-
    ㆍ Layer-3 :-
    ㆍ Layer-4 :-
    ㆍ : 1,207mm²
    (2) Hoop Bar
    ㆍ End : d10@150
    ㆍ Middle : d10@150
    (3) Tie Bar
    ㆍ Apply Tie Bar to Shear Check : Yes
    ㆍ Tie Bar = 217MPa )

    7. Check Slenderness Ratio


    (1) Calculate radii of gyration
    ㆍ = 0.3D = 90.00mm
    ㆍ = 0.3B = 60.00mm
    (2) Calculate slenderness ratio
    ㆍ = 0.000
    ㆍ = 0.000
    ㆍ = = 34.00 → Not Slender
    ㆍ = = 34.00 → Not Slender

    8. Check Magnified Moment


    (1) Calculate moment magnification factor
    ㆍ = 1.000
    ㆍ = 1.000

    9. Check Minimum Moment


    (1) Calculate minimum eccentricity
    ㆍ = 15 + 0.03D = 24.00mm
    ㆍ = 15 + 0.03B = 21.00mm
    (2) Calculate minimum moment
    ㆍ = = 0.777kN·m
    ㆍ = = 0.680kN·m

    10. Check Design Moment


    (1) Calculate design moment
    ㆍ = = 28.98kN·m
    ㆍ = = 8.840kN·m
    ㆍ = 30.30kN·m

    11. Check Design Parameter


    (1) Calculate rebar ratio
    ㆍ = = 1,207mm²
    ㆍ = = 0.0800, ρ = 0.0201
    ㆍ
    (2) Calculate eccentricity
    ㆍ = = 273mm
    ㆍ = = 896mm
    ㆍ e = = 936mm
    ㆍ Rotation angle of neutral axis = 31.80°
    (3) Calculate concentric axial load capacity
    ㆍ = = 1,381kN
    ㆍ = = 1,105kN
    ㆍ = = -332kN

    12. Check Moment Capacity ( Balanced axis )


    (1) Calculate capacity of compression stress block
    ㆍ = 0.850
    ㆍ c = 209mm, a = = 178mm
    ㆍ = 29,472mm²
    ㆍ = 14.02mm, = 71.97mm
    ㆍ = = 526kN
    ㆍ = = 37.86kN·m
    ㆍ = = 7.378kN·m
    (2) Calculate capacity of rebar
    i
    ( mm ) ( MPa ) ( mm² ) ( kN ) ( mm ) ( kN ) ( mm ) ( kN )
    1 305 -0.001375 -275 201 -55.30 -110 6.083 -60.00 3.318
    2 212 -0.000035 -7.044 201 -1.417 0.000 0.000 -60.00 0.0850
    3 118 0.001305 261 201 52.47 110 5.772 -60.00 -3.148
    4 55.07 0.002211 275 201 55.30 110 6.083 60.00 3.318
    5 149 0.000871 174 201 35.03 0.000 0.000 60.00 2.102
    6 242 -0.000469 -93.76 201 -18.86 -110 2.074 60.00 -1.131
    ㆍ = 67.23kN
    ㆍ = 20.01kN·m
    ㆍ = 4.544kN·m
    (3) Calculate nominal capacity for neutral axis
    ㆍ = = 593kN
    ㆍ = = 57.88kN·m
    ㆍ = = 11.92kN·m
    ㆍ = = 59.09kN·m

    13. Check Moment Capacity ( Neutral axis )


    (1) Calculate capacity of compression stress block
    ㆍ c = 115mm, a = = 98.11mm
    ㆍ = 10,747mm²
    ㆍ = 37.94mm, = 112mm
    ㆍ = = 192kN
    ㆍ = = 21.39kN·m
    ㆍ = = 7.277kN·m
    (2) Calculate capacity of rebar
    i
    ( mm ) ( MPa ) ( mm² ) ( kN ) ( mm ) ( kN ) ( mm ) ( kN )
    1 305 -0.004935 -275 201 -55.30 -110 6.083 -60.00 3.318
    2 212 -0.002505 -275 201 -55.30 0.000 0.000 -60.00 3.318
    3 118 -0.000075 -14.98 201 -3.012 110 -0.331 -60.00 0.181
    4 55.07 0.001569 275 201 55.30 110 6.083 60.00 3.318
    5 149 -0.000861 -172 201 -34.64 0.000 0.000 60.00 -2.078
    6 242 -0.003291 -275 201 -55.30 -110 6.083 60.00 -3.318
    ㆍ = -148kN
    ㆍ = 17.92kN·m
    ㆍ = 4.739kN·m
    (3) Calculate nominal capacity for neutral axis
    ㆍ = = 43.58kN
    ㆍ = = 39.31kN·m
    ㆍ = = 12.02kN·m
    ㆍ = = 41.11kN·m
    (4) Calculate strength reduction factor
    ㆍ = 0.0014, = 0.0050
    ㆍ = 0.004935
    ㆍ ø = 0.895
    (5) Calculate axial load and moment capacities
    ㆍ = 38.98kN
    ㆍ = 35.17kN·m
    ㆍ = 10.75kN·m
    ㆍ = 36.77kN·m
    ㆍ = 0.824 < 1.000 → O.K
    ㆍ = 0.822 < 1.000 → O.K
    ㆍ = 0.830 < 1.000 → O.K
    ㆍ = 0.824 < 1.000 → O.K
    P (kN)
    1500
    θ=17.00˚
    1300
    N.A=31.80˚

    1100

    900

    718
    700
    eb=209.34mm
    500

    300

    100
    (39,37)
    (32,30) M (kN·m)
    0
    -100

    -300

    -500
    0
    6

    12

    18

    24

    30

    36

    42

    48

    54

    60

    14. Check Shear Capacity


    (1) Calculate maximum space
    ㆍ ø = 0.750
    ㆍ = = 200mm
    (2) Calculate Shear Strength ( Direction X )
    ㆍ s = = 200mm → O.K
    ㆍ = = 29.13kN
    ㆍ = = 27.26kN
    ㆍ = = 56.38kN
    ㆍ = 0.0954 → O.K
    (3) Calculate Shear Strength ( Direction Y )
    ㆍ s = = 200mm → O.K
    ㆍ = = 31.55kN
    ㆍ = = 44.29kN
    ㆍ = = 75.84kN
    ㆍ = 0.194 → O.K
    ㆍ

    You might also like