JSA For Materia/equipment Loading Unloading & Shifting Work Jsa

Jubilant Infrastructure Limited-Bharuch
Annexure-6
JOB SAFETY ANALYSIS
JSA NO. Department / Routine/ Non

Job Title: New/ Revised
Activity/ No… Routine
Reference work
Permit no: Supervisor:
Prepared By:
JOB SAFETY
ANALYSIS
Plant Location: UNIT-1
Department: Project FABRIACTION YARD Reviewed By:
TO NIACINAMIDE
Job Description: structural material/equipment unloading, shifting &

lifting by farina/crane or tandem lifting by farana Approved By:
SEQUENCE OF TASK POTENIAL HAZARDS PREVENTIVE MEASURES
 Mobilization of  Unskilled workers,  HSE Induction complete before work start.

Manpower  Person injury  Job Specific Training given for worker before work start.
 Property damage  Daily general Tool Box Talk conducted by Safety representative &
site Eng.
 Only authorized (gate pass) people are allowed to work on
respective jobs.
 Ensure work permit before work start.
 Area shall be barricaded to prevent unauthorized entry.
 Barricading of work  Use of required PPEs as per company rules safety norms- safety
area  Personal injury shoes, safety helmet, safety goggle, reflective jacket.
 No any unauthorized material to be kept inside barricading area.
 10-meter area should be barricaded.
 Improper loading  Follow safe unloading procedure.
 Unloading of  Overloading  Use certified tool and tackles
structural  Unbalance materials  Loaded vehicle should not be more than -
material/equipment  Movement of other  Trained riggers are deployed
vehicle crane/farana  Operator with HMV license deployed.
 Defective lifting  The farana/crane should not exceed 10 km/h speed limit
belt/sling  Use of trained and experienced personnel
 Use of extra leverage  Ensure competence of the personnel involved
for tightening  Capacity of the vehicle should be related to the load to be carried
 Over tightness/
slackness Dimensions of
the load
 Sharp edges
Page 1 of 3
Format No.: EHS-006/F06-00 Effective Date:
Annexure-6
JOB SAFETY ANALYSIS
 Structural  Inadequate  Operator shall check soil condition and see that outriggers are in
material/equipment farana/crane working position before starting lifting operations
lifting platform (due to  Crane/farana to be operated within SWL
soft/unstable soil,  Certification and color coding of equipment
outrigger not fully  All rigging, singing and lifting to be done by competent person
deployed etc)  Prior to use, all equipment’s to be visually inspected
 Over loading of  All persons to be made aware of danger through tool box talk
farana/crane  Ensure sufficient room for operation
 Damage to lifting  Tag line to be attached to load to prevent swinging
equipment since  The material not to be stacked too high
inspection  Material to be stacked on adequate base
 Personnel having body  Materials to be secured/covered are kept under shelter
part trapped by load  Good housekeeping to be maintained
 Moving crane/load  Material to be adequately segregated
hitting people / assets
 Material stacked too
high
 Inadequate base for
storing materials
 Tandem lifting of  Unbalance of material  All the lifting gears to be third party inspected with valid form-
equipment with 02  Miss communication 10
nos faranha between both operator  Check the driver license with HWV driving license and
 Toppling of the franna. experience of operator.
 slip & trip.  Farana should not use is pulling of materials.
 fall of material  Work permit must be obtained before starting the work.
 Movement of vehicle  Prepare lifting plan for tandem lifting as consider as critical
near tendon lifting/ lifting.
shifting.  Proper PPEs like as Helmet, Goggles, Reflective jacket, shoes,
Hand gloves.
 Overhead power line proper distance must be maintained.
 Root/ground survey shall be done before lifting materials.
 Use tag ropes on each side for avoid over swinging.
 Lifting plan shall be discussed with the operators
 Supervisor/foreman shall monitor the job continuously
 The person who are holding tag ropes shall keep safe distance
from the materials.
 Evacuate the area and rigger shall ensure all the area while
shifting the materials.
 Do not exceed 80% of the rated capacity of the crane for any
loading/ unloading works and or as per manufacturer standards
under any circumstances.
 Only single signalman shall give the signal for the farana/crane
operator.
 Conducted tool box talk prior to start the work.
 Flag man available during shifting reactor
Page 2 of 3
Annexure-6
JOB SAFETY ANALYSIS
 Shifting of structual  Fall of material  Follow safe shifting procedure

material/equipment  Damage of property  Use of experienced personnel.
 Injury to persons due to  Having adequate area for storage.
fall of load from the  Following proper storing procedures.
vehicle  Proper supervision.
 Slip, trip hazards  Ensure the proper signalman.
 Ensue proper access for materials shifting.
 Ensure moment only 1 fit height for Equipment shifting work
activity.
 Ensure the proper balance for materials.
 Ensure the deviation for Equipment shifting activity.
 Housekeeping  Slip, trip hazards  Ensure entire area shall be cleaned after job is completed.
Remove unwanted material from site after close the job.
 Erection material should be proper stacking.
 In Case of Emergency  Confusion  Emergency assembly point, emergency access should be defined
& always free from any obstructions.
 Emergency contact details to be displayed at prominent locations
of site.
 Emergency vehicle must be available at work locations during all
working hours.
 All workers shall aware / trained about site emergency
procedure.
Day-1 Day-2 Day-3
Permit issuer
Permit acceptor
Prepared by- Permit Issuer and Permit Acceptor Reviewed by-Plant Manager/ Safety officer
Approved by HOD
Page 3 of 3

JSA For Materia/equipment Loading Unloading & Shifting Work Jsa

Uploaded by

Copyright:

Available Formats

JSA For Materia/equipment Loading Unloading & Shifting Work Jsa

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JSA For Materia/equipment Loading Unloading & Shifting Work Jsa

Uploaded by

Copyright:

Available Formats

Jubilant Infrastructure Limited-Bharuch

JSA NO. Department / Routine/ Non

Job Description: structural material/equipment unloading, shifting &

SEQUENCE OF TASK POTENIAL HAZARDS PREVENTIVE MEASURES

 Mobilization of  Unskilled workers,  HSE Induction complete before work start.

 Shifting of structual  Fall of material  Follow safe shifting procedure

Day-1 Day-2 Day-3

You might also like