Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Chemical Monitoring

    Uploaded by

    Shamsuddin Soomro
    The document provides a summary of chemical injection points and treatment rates for various chemicals used at a production facility including antifoam, demulsifier, oxygen scavenger, scale inhibitor, corrosion inhibitor, biocide, and coagulant. Chemical injection locations include inlet separators, desalters, transfer pumps, and storage tanks. Monitoring requirements and approaches are also summarized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Chemical Monitoring

    Uploaded by

    Shamsuddin Soomro
    36 views1 page
    The document provides a summary of chemical injection points and treatment rates for various chemicals used at a production facility including antifoam, demulsifier, oxygen scavenger, scale inhibitor, corrosion inhibitor, biocide, and coagulant. Chemical injection locations include inlet separators, desalters, transfer pumps, and storage tanks. Monitoring requirements and approaches are also summarized.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a summary of chemical injection points and treatment rates for various chemicals used at a production facility including antifoam, demulsifier, oxygen scavenger, scale inhibitor, corrosion inhibitor, biocide, and coagulant. Chemical injection locations include inlet separators, desalters, transfer pumps, and storage tanks. Monitoring requirements and approaches are also summarized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views1 page

    Chemical Monitoring

    Uploaded by

    Shamsuddin Soomro
    The document provides a summary of chemical injection points and treatment rates for various chemicals used at a production facility including antifoam, demulsifier, oxygen scavenger, scale inhibitor, corrosion inhibitor, biocide, and coagulant. Chemical injection locations include inlet separators, desalters, transfer pumps, and storage tanks. Monitoring requirements and approaches are also summarized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    BISAT PRODUCTION FACILITY (BISAT C)

    SYSTEM NUMBER: XXXX


    SUB-SYSTEM NUMBERS: XXXXX
    SYSTEM PROCEDURE
    BSTC-00-OPS-PRC-EXT- August 30,
    Revision: K-00
    000-00002-00 2021

    5.0 CHEMICAL INJECTION SUMMARY

    Chemistry Product Name Treatment Location Treat Rate Basis Frequency Monitoring Requirements Monitoring Approach

    Separator Level Monitoring


    Antifoam AFMR21907A u/s Inlet Separator, 02-V-1001 30 ppm Total Oil Continuous Oil Dehydration Analysis, Track & Trend
    Produced Water Quality / OIW

    u/s Inlet Separator, 02-V-1001 5-7 ppm Total Fluids Continuous


    st
    T1: u/s Desalter 1 Stage, 08-V-1005 0-10 ppm Total Fluids If required BS&W, Water Content ex. Inlet Oil
    Phase Separation
    Leg & Desalters
    Vessel Level Stability
    Demulsifier EMBR18538A T1: u/s Desalter 2nd Stage, 08-V-1008 0-10 ppm Total Fluids If required
    Oil Dehydration
    Analysis, Track & Trend
    st
    T2: u/s Desalter 1 Stage, 08-V-2005 0-10 ppm Total Fluids If required Produced Water Quality / OIW
    <0.5% Water RequiredI
    T2: u/s Desalter 2nd Stage, 08-V-2008 0-10 ppm Total Fluids If required

    Open Drains Pump Discharge 0-50ppm Total Water Batch. If required


    PW Injection Pumps 0-20ppm Total Water Continuous <10ppb Diss. O2
    Oxygen Dissolved Oxygen
    OSCV20002A Raw Water Transfer Pumps 0-20ppm Total Water Batch. If required Residual Bisuphite
    Scavenger Residual Bisulphite
    Oil Offloading Pump Discharge 0-20ppm Total Water Batch. If required Orbisphere (inline O2)
    Fire Water Pumps Discharge 0-20ppm Total Water Batch. If required

    Scale Inhibitor Residuals


    SCAL16170A Raw Water Transfer Pumps 15 ppm Total Water Continuous Analysis, Track & Trend
    Inhibitor ESEM and Ion Analysis

    Corrosion Corrosion Coupons / Probes


    CORR23304A Inlet Separator 15 ppm Total Fluids Continuous Analysis, Track & Trend
    Inhibitor Laboratory LPR & Residuals
    Produced Water Injection 500 ppm Total Water Batch – 3h Twice Serial Dilutions
    Raw Water Storage Tank Total Water Weekly Serial Dilutions Analysis, Track & Trend
    Biocide BIOC16039NR
    No tolerance for SRB
    Batch - 3h
    Fire Water Storage Tank 500 ppm Total Water Serial Dilutions
    Weekly
    Analysis, Track & Trend
    Coagulant CLAR16024A Gas Flotation Tank (GFU) 3-7ppm Total Water Continuous Produced Water Quality / OIW
    OIW <50ppm

    Page 8 of 77

    You might also like