TECHNICAL SPECIFICATIONS

C112-96
Product Group:
System Type:
Installation Group
2-Way, 1.4" x 12", 90°x60°

FEATURES & ADVANCES

• Rotatable Waveguide
• 3.0” Diaphragm Compression Driver
• 14 Reinforced 3/8-16 threaded hang points
• Third-party mounting locations on 4 sides
• U-Bracket factory hardware available
• Flush Mount Wrap-Around Grill

PRODUCT DESCRIPTION
The C112-96 is a two-way, full range loudspeaker, designed specifically for
permanent installations. It is comprised of the McCauley 77100 12” cone
driver and a 3.0” diaphragm compression driver mounted to a rotatable 90°
x 60° waveguide.
The 77100 features a large 4” aluminum voice coil to improve power
handling, an FEA optimized, field serviceable ferrite magnet structure, and
a lightweight hybrid paper composite cone. The new cone body balances
high stiffness, to keep breakup modes above the crossover frequency, with
the internal damping that is inherent to paper cone loudspeakers.
The coupling of the cone driver and high frequency waveguide has been APPLICATIONS
specially engineered to produce a rich and fully balanced sound from • Houses of Worship • Auditoriums
50 Hz to 18 kHz. The C112 is available in either a bi-amplified or passive • Performing Arts Centers • Theatrical Sound Design
configuration and features a versatile rigging system. • Dance Clubs • Live Clubs
• Theme Parks • Sports Facilities
MOUNTING & RIGGING
Mounting locations are distributed across 5 surfaces of the enclosure.
CONSTRUCTION
Omni-mount™ compatible locations are available on 4 sides of the The enclosure is constructed of 18mm 13-ply void-free birch plywood
enclosure, while an additional 14 reinforced 3/8-16 threaded locations and is coated with a weather and wear resistant ProCoat™ polyurea
are available for other mounting options. iDESIGN iDB™ Series array hybrid finish. Loudspeaker components are protected by a flush
frames are available to facilitate assembly and suspension of multiple mounted, wrap-around perforated steel grill lined with acoustically
modules as a single cluster. iDESIGN iDB™ Series U-bracket hardware is transparent foam. The grill and rigging components are weather
also available for single unit wall and ceiling mount installation. protected with a heat cured epoxy powder coat finish.

PERFORMANCE PARAMETERS PHYSICAL PROPERTIES

System Type 90°x60°, 2-Way, Full Range Weight 71lbs / 32.3kgs
Frequency Response Dimensions
-10dB 47Hz - 20kHz inches 27.5 h x 15.1 w x 16.1 d
+/- 3dB 50Hz - 18kHz centimeters 69.9 h x 38.3 w x 40.8 d
Sensitivity Enclosure Material 18mm 13-ply Birch Laminate
Passive 99dB @ 2.83V 1 m
LF 99dB @ 2.83V 1 m Suspension (14) 3/8-16 reinforced hang points
HF 107dB @ 2.83V 1 m (4) Third-party compatible mounting locations
(3) Horizontal U-Bracket mounting locations
Maximum SPL (cont. / peak) (1) Vertical U-Bracket mounting location
Passive 125dB / 131dB
LF 125dB / 131dB Finish Procoat™ Polyurea-Hybrid Weatherproofing
HF 129dB / 135dB (Black is standard, White and / or Custom Colors Available)

Crossover Data 1200Hz @ 24dB per octave Transducers (1) 77100-8 12” LF Transducer
(1) 3" Diaphragm, 1.4" Exit Compression Driver
Power Ratings
Passive - AES 425W @ 8Ω Connectors Pheonix PC_4-4-ST-7.62 4-Position
Accepts up to 10AWG Bare or Dual 12AWG Feruled
LF - AES 350W @ 8Ω
HF - AES 75W @ 8Ω Compatible Array Frames IDB.22-AF, IDB.828-AF, IDB.282-AF, IDB.222-AF,
(for building clusters) IDB.252-AF
Passive - Program 850W @ 8Ω
LF - Program 700W @ 8Ω Compatible U-Brackets IDB.112-H, IDB.112-V
HF - Program 150W @ 8Ω (for deploying individually)

McCauley Sound Inc. - 16607 Meridian Avenue East - Puyallup, WA 98375 - U.S.A
Phone: 1.877.McCauley - Fax: 253.841.3050 - http://www.mccauleysound.com
 DIMENSIONAL ILLUSTRATIONS
88.90
3.50
Attachment points for 3rd Party Accessories
Top and Bottom
Allen Products MM-120-BTM
193.97 OmniMount 60.0 Series
174.63 7.64 407.96 Sides
6.88 16.06 OmniMount 60.0 Series
Allen Products MM-120-BT
171.44 Rear
6.75 OmniMount 60.0 Series
Allen Products MM-120-BT
30.00°

698.50
27.50

330.20
13.00

383.01 259.59
15.08 10.22

NOTES:
A. CABINET WEIGHT 71 LBS [ 32.3 KG ]
B. SHIPPING WEIGHT 78 LBS [ 35.5 KG ]
ARCHITECTS AND ENGINEERS SPECIFICATIONS
The two-way full range loudspeaker system shall incorporate one (1) McCauley 77100-8, 4" (102 mm) voice coil, 12" (303 mm) diameter LF
transducer, and one (1), 1.4" (36 mm) exit, 3" (76 mm) diaphragm compression driver HF transducer. The LF driver shall be mounted in an
optimally vented enclosure tuned for maximum low frequency response with vent area of such size that distortion is minimized at the rated
continuous power. The high frequency transducer shall be mounted to a true constant directivity acoustic horn with a nominal horizontal
coverage pattern of 90°. The vertical coverage pattern of the horn shall be 60° and shall also provide true constant directivity. The HF horn shall
feature a square mounting flange, allowing the horn to be rotated by 90°.
The system frequency response shall vary no more than ±3 dB from 50 Hz to 18 kHz measured on axis. The low frequency transducer shall
produce a Sound Pressure Level (SPL) of 99 dBSPL at a distance of 1 meter with an electrical power input of 2.83 Vrms, and shall be capable of
producing a maximum peak output of 131 dBSPL on axis at 1 meter. The high frequency transducer shall produce a SPL of 107 dBSPL on axis at 1
meter with an electrical power input of 2.83 Vrms, and shall be capable of producing a peak output of 135 dBSPL on axis at 1 meter.
The low frequency transducer shall handle 350W of amplifier power (per AES ref Standard AES2-2012) and shall have a nominal impedance
of 8.0 Ohms. The high frequency transducer shall handle 75W of amplifier power (per AES ref Standard AES2-2012) and shall have a nominal
impedance of 8.0 Ohms.
The loudspeaker enclosure shall have a maximum weight of 71 lbs.(32.3 kg) and shall measure 15.08" (383 mm) wide at front, 6.66" (169 mm)
in width at rear, 27.5" (699 mm) in height, and 16.06"(408 mm) in depth. The enclosure sides shall taper at 15° from a maximum frontal width,
narrowing to the rear. The structure of the enclosure shall be constructed of 18mm, 13-ply void-free birch hardwood plywood, and shall have a
weather and wear resistant ProCoat(tm) polyurea hybrid finish.
The input connection shall be, one (1) 4-Position, 20A rated, Pheonix PC_4-4-ST-7.62, which accepts single bare wires up to 10AWG or dual
12AWG wires with a ferule. Pins (1+, 1-) shall be wired to the LF transducer, while pins (2+, 2-) shall be wired to the HF transducer. When
configured with a passive network, pins (1+, 1-) shall be in parallel with (2+, 2-).
A total of fourteen 3/8"-18 UNC threaded mounting/suspension points (four on top, four on bottom, two per side and two rear) shall be
provided. Six additional mounting points shall be provided on the top, bottom, and each side configured to accept an Omnimount™ Series 120
bracket or other third party hardware.
Components in the front of the enclosure are to be protected by a curved grill made from perforated steel that is coated with heat cured epoxy
powder, and lined with acoustically transparent foam.
The 2-way full range loudspeaker shall be the McCauley Sound model C112-96.

McCauley Sound Inc. - 16607 Meridian Avenue East - Puyallup, WA 98375 - U.S.A
Phone: 1.877.McCauley - Fax: 253.841.3050 - http://www.mccauleysound.com