Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    MC 10183981 0001

    Uploaded by

    tgreen27602
    The document provides instructions for replacing the CVT assembly on 2020 Nissan KICKS and NISSAN VERSA vehicles. Technicians should follow all warnings and cautions when removing and installing the new CVT assembly according to the service manual. The failed CVT assemblies should be returned to the Field Quality Center with a label indicating FQA.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MC 10183981 0001

    Uploaded by

    tgreen27602
    8 views6 pages
    The document provides instructions for replacing the CVT assembly on 2020 Nissan KICKS and NISSAN VERSA vehicles. Technicians should follow all warnings and cautions when removing and installing the new CVT assembly according to the service manual. The failed CVT assemblies should be returned to the Field Quality Center with a label indicating FQA.

    Original Title

    MC-10183981-0001

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for replacing the CVT assembly on 2020 Nissan KICKS and NISSAN VERSA vehicles. Technicians should follow all warnings and cautions when removing and installing the new CVT assembly according to the service manual. The failed CVT assemblies should be returned to the Field Quality Center with a label indicating FQA.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views6 pages

    MC 10183981 0001

    Uploaded by

    tgreen27602
    The document provides instructions for replacing the CVT assembly on 2020 Nissan KICKS and NISSAN VERSA vehicles. Technicians should follow all warnings and cautions when removing and installing the new CVT assembly according to the service manual. The failed CVT assemblies should be returned to the Field Quality Center with a label indicating FQA.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 6


    |

    PM963 | Original Document


    PM963- 2020 KICKS/VERSA
    CVT REPLACEMENT

    SERVICE PROCEDURE:

    NOTE: It is NOT necessary to contact Powertrain Call Center (PCC) for approval. A
    VCAN is not required.
    For KICKS:

    1. Replace the CVT Assembly per the ESM: TRANSMISSION & DRIVELINE > CVT:
    RE0F11B > UNIT REMOVAL AND INSTALLATION, TRANSMISSION ASSEMBLY >
    Removal and Installation.

    2. Also follow Inspection & Adjustment Before and After Installation ESM:
    TRANSMISSION & DRIVELINE > TRANSAXLE & TRANSMISION > CVT: RE0F11B >
    UNIT REMOVAL AND INSTALLATION, TRANSMISSION ASSEMBLY > Inspection and
    Adjustment.

     Using the ESM procedure, follow all Warnings, Cautions, Notes and Torque
    requirements during the Removal and Installation procedure.

    WARNING: Do not remove the coolant reservoir tank cap when the engine is hot.
    Serious burns could occur from high pressure engine coolant escaping from the
    reservoir tank. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to
    allow built-up pressure to escape. Carefully remove the cap by turning it all the way.

    CAUTION:
     Perform these steps after the coolant temperature has cooled sufficiently.
     When replacing transaxle assembly, perform “ADDITIONAL SERVICE WHEN
    REPLACING TRANSAXLE ASSEMBLY”.

    NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug
    openings to prevent fluid from spilling.

    *These CVTs will be placed on parts return back to the Field Quality Center.
    Please direct the parts attention to “FQA” while following the standard
    campaign parts return process.

    1/4
    For VERSA:

    1. Replace the CVT Assembly per the ESM: TRANSMISSION & DRIVELINE >
    TRANSAXLE & TRANSMISSION > CVT: RE0F11B > UNIT REMOVAL AND
    INSTALLATION, TRANSMISSION ASSEMBLY > Removal and Installation.

    2. Also follow Inspection & Adjustment Before and After Installation ESM:
    TRANSMISSION & DRIVELINE > TRANSAXLE & TRANSMISION > CVT: RE0F11B
    > UNIT REMOVAL AND INSTALLATION, TRANSMISSION ASSEMBLY > Inspection
    and Adjustment.

     Using the ESM procedure, follow all Warnings, Cautions, Notes and
    Torque requirements during the Removal and Installation procedure.

    WARNING: Do not remove the coolant reservoir tank cap when the engine is hot.
    Serious burns could occur from high pressure engine coolant escaping from the
    reservoir tank. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to
    allow built-up pressure to escape. Carefully remove the cap by turning it all the way.

    CAUTION:
     Perform these steps after the coolant temperature has cooled sufficiently.
     When replacing transaxle assembly, perform “ADDITIONAL SERVICE WHEN
    REPLACING TRANSAXLE ASSEMBLY”.

    NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug
    openings to prevent fluid from spilling.

    *These CVTs will be placed on parts return back to the Field Quality Center.
    Please direct the parts attention to “FQA” while following the standard
    campaign parts return process.

    2/4
    PARTS INFORMATION:
    Description Part # Quantity
    AUTOMATIC TRANSAXLE 31020-50X5A 1
    NUT 01223-00231 4
    NUT 01225-N0011 2
    NUT 01225-N2011 2
    WASHER DRAIN 11026-JA00A 1
    GASKET-INTAKE MANIFOLD 14035-5RL0A 1
    GASKET-INTAKE MANIFOLD 16175-5RB0A 1
    CLAMP 16439-7S01E 2
    NUT-FIX, EXHAUST TUBE 20602-9U20B 2
    GASKET-EXHAUST 20691-19B0A 1
    GASKET-EXHAUST 20692-1HA0A 1
    SEAL-O RING 31084-3Z000 1
    PIN-COTTER 40073-0L700 2
    NUT-LOCK, FRONT WHEEL B 40262-4M400 2
    NUT 54588-1HA0C 4
    NS-3 CVT FLUID 999MPCV0NS3 12
    NISSAN LONG LIFE 999MPL25500P 3
    COOLANT BLUE

    3/4
    CLAIMS INFORMATION

    Submit claim using the following claims coding:

    Work Order Line Type: “CM” Campaign

    Campaign: PM963
    Claim Type: CM

    PNC: PM963

    Symptom: ZZ

    Diagnosis: 99

    Flat Parts Expense


    Op
    Description: Rate Required Code
    Codes
    Time on claim Required

    Replace CVT Assembly (Versa) PM9630 7.5 Hr Yes NO

    Replace CVT Assembly (KICKS) PM9631 7.3 Hr YES NO

    4/4

    You might also like