Shivaji University, Kolhapur

Question Bank for Mar 2022 (Summer) Examination

Subject Code: 71814 Subject Name: Engineering Graphics

Common subject Code (if any)
--------------------------------------------------------------------------------------------

Sr. Question Marks

No.
1 Complete the projections of line PQ of 75 mm. Top view makes an angle of 450 with 05
FRP and end Q is 65 mm above HRP Ref. Fig

FV PF

X
Y

PH
TV

2 Complete the projections of line AB if Grade is 75%, bearing is S45W and true length 05
is 80 mm Ref. Fig

FV AF

X
Y

AH
TV

3 The top view of 75 mm long line AB measures 65 mm, while the length of its front 05
view is 50 mm. It’s one end A is 10 mm above HP and 12 mm Infront of VP. Draw
the projections of AB and determine its inclinations with HP and VP

4 The TV of 75 mm long line CD measures 50 mm. End C is in HP and 50 mm Infront 05

of VP and it is above HP. Draw the projections of CD and find angles with HP & VP

5 Line AB is 75 mm long. Its FV and TV measures 50 mm and 60 mm. End A is 10 05

mm above HP and 15 mm Infront of VP. Draw projections of line AB and find angles
with HP and VP

Page 1 of 13
6 An end A of line AB is 16 mm above HP and 20 mm Infront of VP, while the end B 05
is 60 mm above HP and 50 mm Infront of VP. If the end projectors are 50 mm apart,
find the true length and true inclinations.
7 Draw the projections of line AB if its bearing is S45E at A. Its grade is 70 % and its 05
length in front view is 70 mm. Assume point A to be 10 mm above HP and 15 mm
Infront of VP.
8 Complete the projections of line PQ and find its true length if it bears due south at P 05
having grade 75% at P
QF

FV
PF
X Y

PH

TV
9 The TV of line MR has points Mf and Rf 12 mm and 60 mm belove XY line and the 05
FV has Mh and Fh above XY line. Determine true length and true inclinations of line
MR with HP and VP, if the end projectors are 70 mm apart.
10 A line MN has end M on HP and 50 mm Infront of VP, while the end N is on VP and 05
40 mm above HP. If the inclination in TV is 350, draw the projections and find True
length and true inclinations.
11 Find the angle made by plane PQR with HP and perimeter of plane PQR. Ref fig. 05

Page 2 of 13
12 Find the angle made by plane ABC with VP and perimeter of plane ABC. Ref. fig. 05

13 Draw the FV and TV of a regular pentagon of 50 mm sides when the surface of the 05
plane is kept on VP having one of its side perpendicular to HP.
14 Find the angle made by plane ABC with HP and its perimeter 05

Page 3 of 13
15 Draw the true shape of the plane PQR 05

16 A hexagonal lamina of side 35 mm rests on one of its sides is in the VP and parallel 10
to HP. Draw its projections if the surface of the lamina is inclined at 450 to the VP.
17 A pentagonal plate of side 30 mm has one of the sides in the VP and parallel to HP. 10
The surface of the plate makes an angle of 300 with the VP. Draw its projections.
18 A pentagonal plane lamina of sides 30 mm is resting on the HP on one of its corners 10
so that the surface makes an angle of 600 with the HP. If the side opposite to this
corner makes an angle of 300 with VP and is parallel to HP, draw FV and TV of the
pentagon.
19 A semi-circular disc plate of diameter 65 mm has its straight edge in the VP and 10
inclined at 450 to HP. Draw its projections if the surface of the plate makes an angle
of 300 with the VP.
20 An isosceles triangular plate of 50 mm base and 75 mm altitude appears as an 10
equilateral tringle of 50 mm in TV. Draw the projections of a plate if its 50 mm long
edge is on the HP and inclined 450 to the VP.
21 Construct an ellipse when the distance of a fixed point from a fixed vertical line is 70 05
mm and its eccentricity is 75%.
22 Construct an ellipse when the length of major axis is 100 mm and length of minor 05
axis is 70 mm
23 Construct an ellipse when the length of major axis is 100 mm and the distance 05
between foci is 64 mm.
24 Construct a parabola when the distance of focus from directrix is 50 mm. 05
25 A aeroplane takes off from the ground, attains a maximum height of 120 m and 05
crashes at 160 m from the point of take-off. Draw the path of crash aeroplane.

Page 4 of 13
26 A ball is thrown from the top of the building 10 m in height crosses above the top of 05
the pole 15 m tall and situated 5 m from the building or from the point of projection.
Draw the path traced by the ball until it reaches the ground.
27 Construct a hyperbola when the distance of focus from the directrix is 65 mm and 05
eccentricity is 1.5.
28 Construct a hyperbola when the distance of a fixed point from fixed vertical line is 70 05
mm and eccentricity is 3/2
29 A circle of 50 mm diameter rolls on a horizontal line without slipping for one and half 05
revolutions. Trace the path of point P initially at the base of circumference of circle.
30 A wheel of diameter 60 mm having four spokes OA, OB, OC and OD rolls on a 05
horizontal ground without slipping. The spoke OA is horizontal in its initial position
with A to the left of O. After some moment once again, OA becomes horizontal with
A to the right of O. Draw the path traced out by the point B which is initially at the
top of wheel when it starts rolling.
31 Trace the path of point P for a circle of diameter 56 mm. The initial position of point 05
P is at the top of wheel. Draw the cycloid for one complete revolution of a circle.
32 Draw the curve traced by end P of straight stick AP of 115 mm long when it rolls 05
without slipping on a semicircle having its diameter AB=80 mm. Assume the stick
AP to be vertical and tangential to the semicircle initially.
33 Draw the involute of a circle of 40 mm. 05
34 A wheel of 140 mm diameter has four spokes connecting the rim and hub. The hub 05
diameter is 20 mm and wheel is rotating at 90 rpm. The particle of dust starts from
the hub and travels along the spoke with a uniform angular velocity and reaches the
rim after one second. Trace the path of particle.
35 A link 100 mm long, swings on a pivot O from its vertical position of rest to the right 05
through an angle 600 and return to its initial position at uniform velocity. During that
period point P moving at uniform speed along the link from a point at a distance of
12 mm from O, reaches to the end of link. Trace the path of point P
36 A right circular cylinder with 50 mm diameter and height 70 mm rest on HP such that 10
the base is inclined at 600 to HP and top view of axis is inclined 450 to VP
37 A regular cone of 40 mm base diameter and 65 mm axis height is resting on HP on 10
its apex, it is tilted to have its slant edge perpendicular to HP and it is further tilted to
have its top view of the axis 450 to VP. Complete the projections of it.
38 A square pyramid side of base 40 mm and axis height 60 mm has one of the side of 10
base in the HP. The axis of solid is inclined to HP at an angle of 300 and top view of
axis is inclined at an angle 450 with the VP. Draw its projections by keeping apex
nearer to the observer.
39 A Hexagonal prism, side of base 35 mm and axis length 60 mm has one of the side of 10
its base in HP which makes an angle of 300 with VP and axis inclined at an angle 450
with HP. Draw its projections.
40 A pentagonal pyramid of 50 mm base sides and height 90 mm is lying on one of its 10
triangular surface on the ground, such that the top view of the axis is inclined at an
angle of 450 to the VP. Draw its front view and top view when apex is nearer to VP.

Page 5 of 13
41 From the following figure draw, 15
i) Sectional front view along A-B in the direction X
ii) Top view
iii) Show important dimensions

42 From the following figure draw, 15

i) Sectional front view along A-A in the direction X
ii) Left hand side view
iii) Show important dimensions

Page 6 of 13
43 From the following figure draw, 15
i) Sectional front view along A-A in the direction X
ii) Left hand side view
iii) Show important dimensions

44 From the following figure draw, 15

i) Sectional front view along A-A in the direction X
ii) Top view.
iii) Show important dimensions

Page 7 of 13
45 From the following figure draw, 15
i) Front view in the direction X.
ii) Sectional side view along plane B-B.
iii) Show important dimensions

46 From the following figure draw, 15

i) Sectional front view along B-B in the direction X
ii) Right hand side view
iii) Show important dimensions

Page 8 of 13
47 From the following figure draw, 15
i) Front view in the direction F
ii) Sectional Left hand side view along X-X
iii) Show important dimensions

48 From the following figure draw, 15

i) Sectional front view along A-A in the direction X
ii) Left hand side view
iii) Show important dimensions

Page 9 of 13
49 From the following figure draw, 15
i) Sectional front view along A-A in the direction X
ii) Left hand side view
iii) Show important dimensions

50 From the following figure draw, 15

i) Sectional front view along A-A in the direction X
ii) Left hand side view
iii) Show important dimensions

Page 10 of 13
51 Figure shows the views, Draw its isometric view 10

52 Figure shows the views, Draw its isometric view 10

Page 11 of 13
53 Figure shows the views, Draw its isometric view 10

54 Figure shows the views, Draw its isometric projection 10

Page 12 of 13
55 Figure shows the views, Draw its isometric view 10

56 A hexagonal based pyramid with base side 25 mm and height 50 mm rests on HP with 10
two opposite base edges parallel to VP, the pyramid is cut by section plane which is
perpendicular to VP and inclined 450 to HP and passing through its extreme left hand
side corner. Draw the F.V., sectional T.V., and development of remaining part of
pyramid
57 A square prism base 45 mm and 90 mm long axis, has its base on the ground and 10
faces equally inclined to VP. It is cut by a plane inclined 600 to HP and passing
through a point on axis 65 mm above the ground. Draw its F.V., sectional T.V. and
develop the remaining part of prism after taking the section.
58 A cone with 60 mm diameter and 70 mm height rests on HP on its base. It is cut by 10
an auxiliary vertical plane with 600 to VP and 10 mm away from axis of cone. Draw
sectional F.V., T.V., and develop the remaining part of cone after taking the section.
59 A cylinder with 50 mm base diameter and 68 mm height of axis is cut by a section 10
plane passing through the midpoint of axis of cylinder making an angle of 250 to the
H.P. Draw the F.V., sectional T.V. and develop the remaining part of cylinder after
taking the section.
60 A hexagonal pyramid of 25 mm base edge and 56 mm axis height, resting on HP on 10
its base with two of its opposite base edges perpendicular to VP. The pyramid is cut
by a section plane making 300 to HP and passing through a point on the axis 20 mm
below the apex point. Draw its F.V., sectional T.V., and develop the remaining part
of pyramid after taking the section.

Page 13 of 13