MH Industrial Hoses Catalogue 2024 V1.0
MH Industrial Hoses Catalogue 2024 V1.0
PRODUCT CATALOGUE
2024
TABLE OF CONTENTS
INTRODUCTION 1
1 - HOSES 4
CONTENTS
WATER, AIR & STEAM HOSES 7
ANTI-STATIC FUEL HOSES 25
CHEMICAL HOSES 47
FOOD & BEVERAGE HOSES 55
ABRASIVE HOSES 63
1
2 - FITTINGS 73
3 - ASSEMBLY MACHINES 74
4 - APPENDICES 76
SELECTING THE CORRECT HOSE 76
FLUID COMPATIBILITY CHART 77
CLEANING & SANITIZATION OF FOOD GRADE HOSES 88
BRANDING OF HOSES 89
STORAGE OF HOSES AND ASSEMBLIES 89
HANDLING AND USAGE OF HOSES AND ASSEMBLIES 90
WHY CHOOSE MANULI INDUSTRIAL HOSES?
Manuli Hydraulics has a long and enviable history in the field of fluid power connector
solutions. Our hydraulic connectors are widely used by many of the most well known OEMs
around the world, due to their exceptionally high quality, reliability and performance.
INTRO
The Industrial Hose solutions offered in this document form a new chapter in the company’s
history, where we have taken decades of experience producing some of the most robust and
reliable high-pressure rubber hoses and transferred that expertise to the development of
hoses for industrial conveying applications.
The Manuli Industrial Hose range is not just a simple addition to the already extensive range of Manuli rubber
2
hoses, but is a product sector in and of itself. We offer several different hose types dedicated to conveying
specific fluids and materials, and each and every hose is tailored to suit the challenges of that particular
application.
Our in-house team of material engineers have developed some of the most advanced synthetic rubber
compounds available to modern science, while our team of design engineers have ensured that the hose
structures provide the perfect blend of pressure resistance, flexibility and mechanical strength required for
each specific application.
Some other considerations which make Manuli Industrial Hoses the perfect choice are:
• All Manuli industrial hoses are compatible with a wide range of third-party fitting solutions as well as our
own dedicated range of fittings
• Manuli industrial hoses are available in lengths up to 60m
• Our UK based assembly plant can provide complete assemblies alongside all the necessary pressure
and seal test documentation
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
CUSTOMISED SOLUTIONS
INTRO
are fully prepared to meet any application
challenge that our OEM partners can present
us with, which is why we offer our Bespoke
Solutions Program (BSP).
3
The BSP is just one way that Manuli Hydraulics provides an added value service to our OEM partners.
Manuli Hydraulics is structured in such a way that we can tailor solutions to the specific requirements of our
customers in a way that our competitors never could. We are small enough to be agile and responsive, yet
large enough to have the design and manufacturing capabilities to produce bespoke products at a reasonable
price. Our Design and Production Technology Team are dedicated to working directly with our customers, to
ensure that their precise needs are met.
Used by some of the largest and most respected OEMs around the world, the Manuli Bespoke Solutions
Program means that you never have to compromise on your conveyance system design again.
INDUSTRIAL HOSES - INDEX BY APPLICATION
MULTISERVICE/12 D WATER & AIR HOSE SBR SBR HIGH TENSILE SYNTHETIC CORD 9
HEAVY DUTY
WATER & AIR HOSE, HIGH TENSILE SYNTHETIC CORD & STEEL
MULTISERVICE/21 SD
HEAVY DUTY
SBR SBR
HELIX BODY WIRE 12
STEAMER/18 STEAM & VAPOUR HOSE EPM EPM HIGH TENSILE STEEL WIRE SPIRALS 20
STEAMER
STEAMER/18 OR STEAM & VAPOUR HOSE EPM EPM HIGH TENSILE STEEL WIRE SPIRALS 21
EN 12115 FUEL & MINERAL HIGH TENSILE SYNTHETIC CORD & COPPER
FUELSERVICE/16 D
OIL HOSE
NBR CR
GROUNDING WIRES 31
HIGH TENSILE SYNTHETIC CORD, STEEL
EN 12115 FUEL & MINERAL
FUELSERVICE FUELSERVICE/16 SD
OIL HOSE
NBR CR HELIX BODY WIRE & COPPER GROUNDING 32
WIRES
EN 1825 TYPE B FUEL
FUELSERVICE/20 D HIGH TENSILE SYNTHETIC CORD & COPPER
FUEL EN 1825-B
HOSE FOR AIRCRAFT NBR CR
GROUNDING WIRES 33
REFUELLING
EN 1825 TYPE C FUEL
FUELSERVICE/20 D
EN 1825-C
HOSE FOR AIRCRAFT NBR CR HIGH TENSILE SYNTHETIC CORD 34
REFUELLING
EN 1825 TYPE E FUEL HIGH TENSILE SYNTHETIC CORD, STEEL
FUELSERVICE/20 D
EN 1825-E
HOSE FOR AIRCRAFT NBR CR HELIX BODY WIRE & COPPER GROUNDING 35
REFUELLING WIRES
FUEL & OIL HOSE, HEAVY HIGH TENSILE SYNTHETIC CORD & COPPER
FUELSERVICE/21 D
DUTY
NBR SBR
GROUNDING WIRES 36
HIGH TENSILE SYNTHETIC CORD, STEEL
FUEL & OIL HOSE, HEAVY
FUELSERVICE/SD
DUTY
NBR SBR HELIX BODY WIRE & COPPER GROUNDING 37
WIRES
EN 1360 TYPE 1 FUEL & HIGH TENSILE SYNTHETIC CORD & COPPER
FUELDISPENSER/D
MINERAL OIL HOSE
NBR CR
GROUNDING WIRES 38
FUELDISPENSER HIGH TENSILE SYNTHETIC CORD, STEEL
EN 1360 TYPE 2 FUEL &
FUELDISPENSER/SD
MINERAL OIL HOSE
NBR CR HELIX BODY WIRE & COPPER GROUNDING 39
WIRES
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
INDUSTRIAL HOSES - INDEX BY APPLICATION
HOSES
HIGH FLEXIBILITY
WIRES
FUEL DELIVERY WITH HIGH TENSILE SYNTHETIC CORD,
FUELTANKER FUELTANKER/10 SD HIGH ABRASION RE- NBR NBR/PVC THERMOPLASTIC OUTER HELIX & COPPER 43
SISTANCE GROUNDING WIRES
DRILLING MUDS, OIL & HIGH TENSILE SYNTHETIC CORD & COPPER
FRACKING MUDSERVICE MUDSERVICE/28 D
ABRASIVE SLURRIES
X-NBR CR
GROUNDING WIRES 44
5
HIGH TENSILE SYNTHETIC CORD & STEEL
PROGAS LPG SD LPG HOSE NBR CR
HELIX BODY WIRE 46
FKM HOSE FOR AGGRES- HIGH TENSILE SYNTHETIC CORD & STEEL
CHEMKING/10 SD
SIVE CHEMICALS
FKM CR
HELIX BODY WIRE 50
EN 12115 ANTI-STATIC HIGH TENSILE SYNTHETIC CORD, STEEL
CHEMICAL CHEMKING CHEMKING/16 SDE EPDM HOSE FOR CHEMI- EPDM CR HELIX BODY WIRE & COPPER GROUNDING 51
CAL PRODUCTS WIRES
EN 12115 ANTI-STATIC HIGH TENSILE SYNTHETIC CORD, STEEL
CHEMKING/16 SDA UHMWPE HOSE FOR UHMWPE CR HELIX BODY WIRE & COPPER GROUNDING 52
CHEMICAL PRODUCTS WIRES
HIGH TENSILE SYNTHETIC CORD, STEEL
EN 12115 FEP HOSE FOR
CHEMKING/16 SD
CHEMICAL PRODUCTS
FEP CR HELIX BODY WIRE & COPPER GROUNDING 53
WIRES
BEER, WINE & ALCOHOL HIGH TENSILE SYNTHETIC CORD & STEEL
BREWERS BREWERS/12 SD
HOSE
BIIR EPDM
HELIX BODY WIRE 57
BEER, WINE & ALCOHOL HIGH TENSILE SYNTHETIC CORD & STEEL
BREWERS BREWERS/12 SDC
HOSE
BIIR EPDM
HELIX BODY WIRE 58
LIQUID FOOD
& BEVERAGE MILK & FATTY FOODS HIGH TENSILE SYNTHETIC CORD & STEEL
MILKYWAY MILKYWAY/ 10 SD
HOSE
NBR NBR
HELIX BODY WIRE 59
LAYFLAT HOSE FOR DRY HIGH TENSILE SYNTHETIC CORD & COPPER
DRY FOOD ABRAFOOD ABRAFOOD/10
FOODS
NR CR
GROUNDING WIRES 61
LAYFLAT HOSE FOR
ABRADRY ABRADRY ABRASIVE DRY MATE- NR/SBR SBR/NR/PVC HIGH TENSILE SYNTHETIC CORD 65
ABRASIVE RIALS
SOLIDS SANDBLASTING & ABRA-
SANDSERVICE SANDSERVICE/21 D/4
SIVE FLUID HOSE
NR/SBR NR/SBR HIGH TENSILE SYNTHETIC CORD 66
ABRASIVE REVERSE CYCLE DRILL- HIGH TENSILE SYNTHETIC CORD & STEEL
ABRASERVICE ABRASERVICE/35 SD
ING HOSE
NR/SBR NR/SBR
HELIX BODY WIRE 69
FLUIDS
PLASTER SPRAYING
ABRASERVICE/40 D
HOSE
NR/SBR NR/SBR HIGH TENSILE SYNTHETIC CORD 70
HIGH-PRESSURE CON-
ABRASERVICE/100 D
CRETE PUMPING HOSE
NR/SBR NR/SBR HIGH TENSILE STEEL CORD 71
INDUSTRIAL HOSES - INDEX BY WORKING PRESSURE
ABRADRY 6 4 4 4 4
ABRAFOOD/10 10 10
ABRASERVICE/10 D 10 10
ABRASERVICE/10 SD 10 10 10 10 10
ABRASERVICE/35 SD 35 35 35
HOSES
ABRASERVICE/40 D 40 40 40 40 40 40
AIRKING/40 40 40 40
AIRSERVICE 45 45 45 45 45 45 45 35
AIRSERVICE/27 27 27 27 27 27 27 27
BREWERS/12 SD 12 12 12 12 12 12 12 12
BREWERS/12 SDC 12 12 12 12 12 12
6
CHEMKING/10 D 10 10 10 10 10 10 10 10 10 10
CHEMKING/10 SD 10 10 10 10 10 10 10 10
CHEMKING/16 SD 16 16 16 16 16 16
CHEMKING/16 SDA 16 16 16 16 16 16 16 16
CHEMKING/16 SDE 16 16 16 16 16 16 16 16
COOLER/5 5 5 5 5 5 5 5 5
COOLSERVICE 5 5 5 5 5 5
FIREX 20 20 20 20 20
FUELDISPENSER/D 16 16 16 16 16 16
FUELDISPENSER/SD 16 16 16 16
FUELFLEX/17 SDC 17 17 17 17 17 17 17 17 17
FUELSERVICE/5 SDC 5 5 5 5 5 5 5 5
FUELSERVICE/10 D 10 10 10 10 10 10 10
FUELSERVICE/10 SD 10 10 10 10 10 10 10 10 10 10 10
FUELSERVICE/10 R4 21 17 14 11 10 10 10 10 10 10
FUELSERVICE/16 D 16 16 16 16 16 16 16 16
FUELSERVICE/16 SD 16 16 16 16 16 16 16 16
FUELSERVICE/20 D EN 1825-B 20 20 20 20 20 20 20 20
FUELSERVICE/20 D EN 1825-C 20 20 20 20 20 20 20 20
FUELSERVICE/20 D EN 1825-E 20 20 20 20 20 20 20 20
FUELSERVICE/21 D 21 21 21 21 21 21 21 21 21 21
FUELSERVICE/21 SD 21 21
FUELTANKER/10 SD 10 10 10 10
FUELTRUCK/16 D 16 16 16 16 16 16 16 16 16 16
FUELTRUCK/16 SD 16 16 16 16 16 16 16 16 16 16
GLACIER/60 60 60 60
MILKYWAY/ 10 SD 10 10 10 10 10 10 10 10
MUDSERVICE/28 D 28 28 28 28
MULTIFOOD/10 SD 10 10 10 10 10
MULTISERVICE/12 D 12 12 12 12 12 12 12 12
MULTISERVICE/12 SD 12 12 12 12 12 12 12 12 12
MULTISERVICE/21 D 21 21 21 21 21 21 21 21
MULTISERVICE/21 SD 21 21 21 21
PROGAS LPG D 25 25 25 25 25 25 25 25 25 25
PROGAS LPG SD 25 25 25 25 25 25 25 25 25 25
SANDSERVICE/21 D 21 21 21 21 21
STEAMER/18 18 18 18 18 18 18 18 18 18 18
STEAMER/18 OR 18 18 18 18 18 18 18 18 18 18
STEAMSAFE/7 7 7 7 7 7
WATERFLAT 5/10 10 10 10 10 10 10 10 5 5
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM
HOSES
WATER & AIR HOSE, HEAVY HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
MULTISERVICE/21 SD
DUTY WIRE 12
GLACIER/60 WATER HOSE FOR SNOW GUNS HIGH TENSILE SYNTHETIC CORD 13
GLACIER
GLACIER/100 WATER HOSE FOR SNOW GUNS HIGH TENSILE STEEL WIRE SPIRALS 14
WATER
LAYFLAT HOSE FOR GENERAL
WATERFLAT WATERFLAT 5/10
PURPOSE WATER
HIGH TENSILE SYNTHETIC CORD 15
STEAMER/18 STEAM & VAPOUR HOSE HIGH TENSILE STEEL WIRE SPIRALS 20
STEAMER
STEAMER/18 OR STEAM & VAPOUR HOSE HIGH TENSILE STEEL WIRE SPIRALS 21
HIGH FLEXIBILITY WATER HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
COOLSERVICE COOLSERVICE/G
GLYCOL COOLING HOSE WIRE 24
WATER, AIR & STEAM HOSES
MULTISERVICE/12 D
WATER & AIR HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80007013* 12 1/2” 20.6 0.81 12 170 36 520 90 3.54 206 0.14 SR+D08000 series
H80007019* 19 3/4” 31.0 1.22 12 170 36 520 110 4.33 453 0.30 SR+D08000 series
9
H80007025* 25 1” 37.4 1.47 12 170 36 520 135 5.31 565 0.38 SR+D08000 series
H80007031* 31 1.1/4” 44.0 1.73 12 170 36 520 165 6.50 720 0.48 SR+D08000 series
H80007038* 38 1.1/2” 52.1 2.05 12 170 36 520 205 8.07 773 0.52 SR+D08000 series
H80007051* 51 2” 65.3 2.57 12 170 36 520 260 10.24 1,026 0.69 SR+D08000 series
H80007063* 63 2.1/2” 78.5 3.09 12 170 36 520 360 14.17 1,520 1.02 SR+D08000 series
H80007076* 76 3” 94.1 3.70 12 170 36 520 470 18.50 1,849 1.24 SR+D08000 series
REINFORCEMENT
APPLICATIONS & FLUIDS High tensile synthetic cord
COVER
• Water or compressed air, to be used in mining,
construction, shipyards, etc. Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WATER, AIR & STEAM HOSES
MULTISERVICE/12 SD
WATER & AIR HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80008019* 19 3/4” 28.1 1.11 12 170 36 520 100 3.94 384 0.26 SR+D08000 series
H80008025* 25 1” 34.5 1.36 12 170 36 520 125 4.92 482 0.32 SR+D08000 series
10
H80008031* 31 1.1/4” 41.1 1.62 12 170 36 520 150 5.91 605 0.41 SR+D08000 series
H80008038* 38 1.1/2” 47.5 1.87 12 170 36 520 190 7.48 701 0.47 SR+D08000 series
H80008051* 51 2” 61.3 2.41 12 170 36 520 250 9.84 1,122 0.75 SR+D08000 series
H80008063* 63 2.1/2” 74.4 2.93 12 170 36 520 350 13.78 1,600 1.07 SR+D08000 series
H80008076* 76 3” 87.5 3.44 12 170 36 520 450 17.72 2,203 1.48 SR+D08000 series
H80008102* 102 4” 114.3 4.50 12 170 36 520 500 19.69 3,330 2.24 SR+D08000 series
H80008152* 152 6” 170.0 6.69 12 170 36 520 760 29.92 6,600 4.48 MARKET FITTINGS
COVER
• Water or compressed air, to be used in mining,
construction, shipyards, etc. Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES
MULTISERVICE/21 D
WATER & AIR HOSE, HEAVY DUTY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80009013* 12 1/2” 20.6 0.81 21 300 63 910 90 3.54 215 0.14 SR+D08000 series
H80009019* 19 3/4” 31.6 1.24 21 300 63 910 110 4.33 457 0.31 SR+D08000 series
11
H80009025* 25 1” 38.2 1.50 21 300 63 910 135 5.31 519 0.35 SR+D08000 series
H80009031* 31 1.1/4” 45.0 1.77 21 300 63 910 165 6.50 659 0.44 SR+D08000 series
H80009038* 38 1.1/2” 51.6 2.03 21 300 63 910 205 8.07 928 0.62 SR+D08000 series
H80009051* 51 2” 65.0 2.56 21 300 63 910 260 10.24 1,224 0.82 SR+D08000 series
H80009063* 63 2.1/2” 78.9 3.11 21 300 63 910 360 14.17 1,583 1.06 SR+D08000 series
H80009076* 76 3” 94.0 3.70 21 300 63 910 470 18.50 1,849 1.24 SR+D08000 series
REINFORCEMENT
APPLICATIONS & FLUIDS High tensile synthetic cord
COVER
• Water or compressed air with oil traces, to be used in
heavy duty mining, construction, shipyards, etc. Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WATER, AIR & STEAM HOSES
MULTISERVICE/21 SD
WATER & AIR HOSE, HEAVY DUTY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80022051* 51 2” 61.3 2.41 21 300 63 910 250 9.84 1,130 0.76 SR+D08000 series
H80022076* 76 3” 88.3 3.48 21 300 63 910 450 17.72 2,285 1.53 SR+D08000 series
12
H80022102* 102 4” 115.1 4.53 21 300 63 910 500 19.69 3,378 2.27 SR+D08000 series
H80022152* 152 6” 168.0 6.61 21 300 63 910 760 29.92 6,800 4.57 MARKET FITTINGS
COVER
• Water or compressed air with oil traces, to be used in
heavy duty mining, construction, shipyards, etc. Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES
GLACIER/60
WATER HOSE FOR SNOW GUNS
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80054025* 25 1" 39.0 1.54 60 900 180 2,700 100 3.94 810 0.54 SR+D08000 series
H80054031* 31 1.1/4" 46.0 1.81 60 900 180 2,700 128 5.04 990 0.66 SR+D08000 series
13
H80054038* 38 1.1/2" 52.0 2.05 60 900 180 2,700 152 5.98 1,140 0.76 SR+D08000 series
REINFORCEMENT
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WATER, AIR & STEAM HOSES
GLACIER/100
WATER HOSE FOR SNOW GUNS
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80055025* 25 1" 40.0 1.57 100 1,500 250 3,750 110 4.33 1,300 0.87 SR+D08000 series
H80055031* 31 1.1/4" 47.0 1.85 100 1,500 250 3,750 140 5.51 1,740 1.16 SR+D08000 series
14
H80055038* 38 1.1/2" 54.0 2.13 100 1,500 250 3,750 170 6.69 2,250 1.50 SR+D08000 series
REINFORCEMENT
APPLICABLE SPECS
Manuli design, safety factor 2.5:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES
WATERFLAT 5/10
LAYFLAT DELIVERY HOSE FOR
GENERAL PURPOSE WATER
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80056051* 51 2" 57.0 2.24 10 150 30 450 - - 580 0.39 MARKET FITTINGS
H80056076* 76 3" 83.0 3.27 10 150 30 450 - - 1,180 0.79 MARKET FITTINGS
15
H80056102* 102 4" 109.0 4.29 10 150 30 450 - - 1,570 1.05 MARKET FITTINGS
H80056152* 152 6" 160.0 6.30 10 150 30 450 - - 2,650 1.77 MARKET FITTINGS
H80056203* 203 8" 215.0 8.46 10 150 30 450 - - 5,320 3.55 MARKET FITTINGS
H80056254* 254 10" 267.0 10.51 10 150 30 450 - - 7,180 4.79 MARKET FITTINGS
H80056305* 305 12' 319.0 12.56 10 150 30 450 - - 9,260 6.17 MARKET FITTINGS
H80056457* 457 18" 476.0 18.74 5 75 15 225 - - 18,400 12.27 MARKET FITTINGS
H80056609* 609 24" 635.0 25.00 5 75 15 225 - - 31,200 20.80 MARKET FITTINGS
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WATER, AIR & STEAM HOSES
FIREX
FIRE SUPPRESSION HOSE, ABS APPROVED
FOR OFFSHORE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80016051* 51 2" 80.0 3.15 20 300 100 1,500 420 16.54 4,900 3.27 MARKET FITTINGS
H80016076* 76 3" 108.0 4.25 20 300 100 1,500 535 21.06 7,500 5.00 MARKET FITTINGS
16
H80016102* 102 4" 134.0 5.28 20 300 100 1,500 640 25.20 11,000 7.33 MARKET FITTINGS
H80016127* 127 5" 160.0 6.30 20 300 100 1,500 1,100 43.31 13,400 8.93 MARKET FITTINGS
H80016152* 152 6" 185.0 7.28 20 300 100 1,500 1,210 47.64 15,700 10.47 MARKET FITTINGS
REINFORCEMENT
APPLICABLE SPECS
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES
AIRSERVICE
AIR COMPRESSOR HOSE, HEAVY DUTY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80010019* 19 3/4” 31.4 1.24 45 650 180 2610 95 3.74 780 0.52 SR+D08000 series
H80010025* 25 1” 37.8 1.49 45 650 180 2610 125 4.92 1,014 0.68 SR+D08000 series
17
H80010031* 31 1.1/4” 44.8 1.76 45 650 180 2610 160 6.30 1,283 0.86 SR+D08000 series
H80010038* 38 1.1/2” 51.2 2.02 45 650 180 2610 190 7.48 1,534 1.03 SR+D08000 series
H80010051* 51 2” 65.0 2.56 45 650 180 2610 255 10.04 2,277 1.53 SR+D08000 series
H80010063* 63 2.1/2” 79.4 3.13 35 500 140 2030 315 12.40 2,915 1.95 SR+D08000 series
H80010076* 76 3” 94.2 3.71 35 500 140 2030 380 14.96 4,068 2.73 SR+D08000 series
H80010102* 102 4” 122.0 4.80 35 500 140 2030 510 20.08 5,800 3.85 SR+D08000 series
REINFORCEMENT
APPLICATIONS & FLUIDS Two wire braids or multiple plies of high tensile steel wire spirals
COVER
• High pressure compressed air and oil traces,to be used
Yellow synthetic NBR/PVC rubber, long lasting, weathering and
in mining, construction, etc. Typically used in compressed ozone resistant
air systems and power transmission.
APPLICABLE SPECS
Manuli design, safety factor 4:1 (DN19 to DN51); 3:1 (DN63 to
DN76)
STANDARD PACKAGING
Coil
WATER, AIR & STEAM HOSES
AIRSERVICE/27
WATER AND AIR COMPRESSOR HOSE,
HEAVY DUTY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80017013* 12 1/2” 20.6 0.81 27 400 81 1175 100 3.93 246 0.16 SR+D08000 series
H80017019* 19 3/4” 30.3 1.19 27 400 81 1175 150 5.90 466 0.31 SR+D08000 series
18
H80017025* 25 1” 36.8 1.45 27 400 81 1175 185 7.28 589 0.39 SR+D08000 series
H80017031* 31 1.1/4” 43.3 1.70 27 400 81 1175 320 12.59 749 0.50 SR+D08000 series
H80017038* 38 1.1/2” 48.9 1.93 27 400 81 1175 380 14.96 898 0.60 SR+D08000 series
H80017051* 51 2” 62.1 2.44 27 400 81 1175 500 19.68 1,195 0.80 SR+D08000 series
H80017076* 76 3” 88.5 3.48 27 400 81 1175 750 29.52 1,986 1.33 SR+D08000 series
REINFORCEMENT
APPLICATIONS & FLUIDS High tensile textile layers
COVER
• Water or compressed air with oil traces, to be used in
mining, construction, etc. Yellow synthetic NBR/PVC rubber, long lasting, weathering and
ozone resistant.
APPLICABLE SPECS
Manuli design: safety factor 3:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES
AIRKING/40
HEAVY-DUTY PNEUMATIC TOOLS IN ROAD
CONSTRUCTION, RAILWAYS, TUNNELLING,
MINING ETC.
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80053051* 51 2" 70.0 2.75 40 600 120 1800 500 19.69 1,930 1.71 SR+D08000 series
H80053076* 76 3" 100.0 3.94 40 600 120 1800 740 29.13 3,750 3.32 SR+D08000 series
19
H80053102* 102 4" 128.0 5.05 40 600 120 1800 970 38.19 5,120 4.53 SR+D08000 series
REINFORCEMENT
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WATER, AIR & STEAM HOSES
STEAMER/18
STEAM & VAPOUR HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80037012* 12 1/2" 25.0 0.98 18 270 180 2,700 120 4.72 530 0.35 MARKET FITTINGS
H80037016* 16 5/8" 30.0 1.18 18 270 180 2,700 155 6.10 750 0.50 MARKET FITTINGS
20
H80037019* 19 3/4" 33.0 1.30 18 270 180 2,700 185 7.28 780 0.52 MARKET FITTINGS
H80037025* 25 1" 40.0 1.57 18 270 180 2,700 240 9.45 1,030 0.69 MARKET FITTINGS
H80037031* 31 1.1/4" 48.0 1.89 18 270 180 2,700 330 12.99 1,410 0.94 MARKET FITTINGS
H80037038* 38 1.1/2" 54.0 2.13 18 270 180 2,700 390 15.35 1,780 1.19 MARKET FITTINGS
H80037051* 51 2" 69.0 2.72 18 270 180 2,700 520 20.47 2,580 1.72 MARKET FITTINGS
H80037063* 63 2.1/2" 81.0 3.19 18 270 180 2,700 640 25.20 3,160 2.11 MARKET FITTINGS
H80037076* 76 3" 94.0 3.70 18 270 180 2,700 745 29.33 4,020 2.68 MARKET FITTINGS
H80037102* 102 4" 122.0 4.80 18 270 180 2,700 990 38.98 6,220 4.15 MARKET FITTINGS
REINFORCEMENT
APPLICABLE SPECS
ISO 6134 - Type 2 Class A Grade M
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES
STEAMER/18 OR
STEAM & VAPOUR HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80038012* 12 1/2" 25.0 0.98 18 270 180 2,700 120 4.72 530 0.35 MARKET FITTINGS
H80038016* 16 5/8" 30.0 1.18 18 270 180 2,700 155 6.10 750 0.50 MARKET FITTINGS
21
H80038019* 19 3/4" 33.0 1.30 18 270 180 2,700 185 7.28 780 0.52 MARKET FITTINGS
H80038025* 25 1" 40.0 1.57 18 270 180 2,700 240 9.45 1,030 0.69 MARKET FITTINGS
H80038031* 31 1.1/4" 48.0 1.89 18 270 180 2,700 330 12.99 1,410 0.94 MARKET FITTINGS
H80038038* 38 1.1/2" 54.0 2.13 18 270 180 2,700 390 15.35 1,780 1.19 MARKET FITTINGS
H80038051* 51 2" 69.0 2.72 18 270 180 2,700 520 20.47 2,580 1.72 MARKET FITTINGS
H80038063* 63 2.1/2" 81.0 3.19 18 270 180 2,700 640 25.20 3,160 2.11 MARKET FITTINGS
H80038076* 76 3" 94.0 3.70 18 270 180 2,700 745 29.33 4,020 2.68 MARKET FITTINGS
H80038102* 102 4" 122.0 4.80 18 270 180 2,700 990 38.98 6,220 4.15 MARKET FITTINGS
REINFORCEMENT
APPLICABLE SPECS
ISO 6134 - Type 2 Class B Grade M
STANDARD PACKAGING
Coil
WATER, AIR & STEAM HOSES
STEAMSAFE/7
STEAM & VAPOUR HOSE FOR
FOOD INDUSTRY CLEANING
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80040010* 10 3/8" 20.0 0.79 7 105 70 1,050 55 2.17 280 0.19 MARKET FITTINGS
H80040012* 12 1/2" 23.0 0.91 7 105 70 1,050 65 2.56 370 0.25 MARKET FITTINGS
22
H80040016* 16 5/8" 26.0 1.02 7 105 70 1,050 85 3.35 430 0.29 MARKET FITTINGS
H80040019* 19 3/4" 31.0 1.22 7 105 70 1,050 100 3.94 580 0.39 MARKET FITTINGS
H80040025* 25 1" 37.0 1.46 7 105 70 1,050 125 4.92 750 0.50 MARKET FITTINGS
APPLICABLE SPECS
FDA Title 21, art. 177.2600 for aqueous foods
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
WATER, AIR & STEAM HOSES
COOLER/5
INDUSTRY & GENERAL PURPOSE WATER
COOLING HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80041016* 16 5/8" 26.0 1.02 5 75 15 225 80 3.15 400 0.27 SR+D08000 series
H80041019* 19 3/4" 29.0 1.14 5 75 15 225 95 3.74 450 0.30 SR+D08000 series
23
H80041025* 25 1" 35.0 1.38 5 75 15 225 125 4.92 580 0.39 SR+D08000 series
H80041031* 31 1.1/4" 42.0 1.65 5 75 15 225 160 6.30 680 0.45 SR+D08000 series
H80041038* 38 1.1/2" 48.0 1.89 5 75 15 225 190 7.48 830 0.55 SR+D08000 series
H80041051* 51 2" 61.0 2.40 5 75 15 225 260 10.24 1,300 0.87 SR+D08000 series
H80041076* 76 3" 96.0 3.78 5 75 15 225 380 14.96 1,900 1.27 SR+D08000 series
H80041102* 102 4" 114.0 4.49 5 75 15 225 480 18.90 2,810 1.87 SR+D08000 series
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WATER, AIR & STEAM HOSES
COOLSERVICE/G
HIGH FLEXIBILITY WATER GLYCOL COOLING
SUCTION & DELIVERY HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80059016* 16 5/8" 26.3 1.03 5 75 20 290 33 1.29 450 0.3 SR+D08000 series
H80059019* 19 3/4" 29.3 1.15 5 75 20 290 36 1.41 500 0.34 SR+D08000 series
24
H80059022* 22 7/8" 34.5 1.37 5 75 20 290 36 1.41 540 0.36 SR+D08000 series
H80059025* 25 1" 37.0 1.46 5 75 20 290 36 1.41 580 0.39 SR+D08000 series
H80059031* 31 1.1/4" 44.0 1.73 5 75 20 290 50 1.96 730 0.49 SR+D08000 series
H80059038* 38 1.1/2” 50.5 1.99 5 75 20 290 70 2.76 980 0.66 SR+D08000 series
• Suction and Delivery hose for hot water and coolant COVER
fluids, applied in engine cooling and heating systems Environmental resistant synthetic rubber, flat corrugated cover
style
• Radiator hose
• Outstanding flexibility, installation in very narrow spaces APPLICABLE SPECS
• Water and water-glycol solutions Manuli design, safety factor 4:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
When conveying fuels the last thing you want is the possibility
of static discharges. Manuli’s anti-static fuel hoses incorporate
various combinations of copper grounding wires and anti-static
rubber compounds to ensure that the risk of static build-up is
eliminated.
HOSE HOSE
APPLICATION RANGE HOSE PAGE
TYPE STRUCTURE
FUEL HOSE WITH HIGH HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELSERVICE/5 SDC
FLEXIBILITY WIRE & COPPER GROUNDING WIRES 27
EN 12115 FUEL & MINERAL OIL HIGH TENSILE SYNTHETIC CORD & COPPER
FUELSERVICE/16 D
HOSE GROUNDING WIRES 31
EN 12115 FUEL & MINERAL OIL HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELSERVICE FUELSERVICE/16 SD
HOSE WIRE & COPPER GROUNDING WIRES 32
FUELSERVICE/20 D EN 1825 TYPE B FUEL HOSE HIGH TENSILE SYNTHETIC CORD & COPPER
EN 1825-B FOR AIRCRAFT REFUELLING GROUNDING WIRES 33
FUELSERVICE/20 D EN 1825 TYPE E FUEL HOSE HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUEL EN 1825-E FOR AIRCRAFT REFUELLING WIRE & COPPER GROUNDING WIRES 35
EN 1360 TYPE 1 FUEL & HIGH TENSILE SYNTHETIC CORD & COPPER
FUELDISPENSER/D
MINERAL OIL HOSE GROUNDING WIRES 38
FUELDISPENSER
EN 1360 TYPE 2 FUEL & HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELDISPENSER/SD
MINERAL OIL HOSE WIRE & COPPER GROUNDING WIRES 39
EN 1761 TYPE D HOSE FOR HIGH TENSILE SYNTHETIC CORD & COPPER
FUELTRUCK/16 D
TRUCK SYSTEMS GROUNDING WIRES 40
FUELTRUCK
EN 1761 TYPE SD HOSE FOR HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELTRUCK/16 SD
TRUCK SYSTEMS WIRE & COPPER GROUNDING WIRES 41
FUEL DELIVERY WITH HIGH HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
FUELFLEX FUELFLEX/17 SDC
FLEXIBILITY WIRE & COPPER GROUNDING WIRES 42
DRILLING MUDS, OIL & HIGH TENSILE SYNTHETIC CORD & COPPER
FRACKING MUDSERVICE MUDSERVICE/28 D
ABRASIVE SLURRIES GROUNDING WIRES 44
FUELSERVICE/5 SDC
FUEL SUCTION & DELIVERY HOSE
WITH HIGH FLEXIBILITY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80024019* 19 3/4" 30.0 1.18 5 75 15 225 20 0.79 500 0.33 SR+D08000 series
H80024025* 25 1" 36.0 1.42 5 75 15 225 25 0.98 610 0.41 SR+D08000 series
27
H80024031* 31 1.1/4" 43.0 1.69 5 75 15 225 30 1.18 740 0.49 SR+D08000 series
H80024038* 38 1.1/2" 49.0 1.93 5 75 15 225 40 1.57 830 0.55 SR+D08000 series
H80024051* 51 2" 62.0 2.44 5 75 15 225 50 1.97 1,150 0.77 SR+D08000 series
H80024063* 63 2.1/2" 76.0 2.99 5 75 15 225 65 2.56 1,370 0.91 SR+D08000 series
H80024076* 76 3" 88.0 3.46 5 75 15 225 75 2.95 1,810 1.21 SR+D08000 series
H80024102* 102 4" 115.0 4.53 5 75 15 225 110 4.33 2,700 1.80 SR+D08000 series
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
FUELSERVICE/10 D
FUEL & OIL HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80004019* 19 3/4” 31.4 1.24 10 150 31 450 90 3.54 503 0.34 SR+D08000 series
H80004025* 25 1” 37.8 1.49 10 150 31 450 115 4.53 629 0.42 SR+D08000 series
28
H80004031* 31 1.1/4” 44.4 1.75 10 150 31 450 150 5.91 788 0.53 SR+D08000 series
H80004038* 38 1.1/2” 52.5 2.07 10 150 31 450 180 7.09 857 0.58 SR+D08000 series
H80004051* 51 2” 65.3 2.57 10 150 31 450 240 9.45 1,129 0.76 SR+D08000 series
H80004063* 63 2.1/2” 78.5 3.09 10 150 31 450 300 11.81 1,679 1.13 SR+D08000 series
H80004076* 76 3” 94.3 3.71 10 150 31 450 380 14.96 2,045 1.37 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding
COVER
• Fuels, oils & diesel with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
FUELSERVICE/10 SD
FUEL & OIL HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80005019* 19 3/4” 28.1 1.11 10 150 31 450 80 3.15 413 0.28 SR+D08000 series
H80005025* 25 1” 34.5 1.36 10 150 31 450 105 4.13 521 0.35 SR+D08000 series
29
H80005031* 31 1.1/4” 41.1 1.62 10 150 31 450 135 5.31 637 0.43 SR+D08000 series
H80005038* 38 1.1/2” 47.5 1.87 10 150 31 450 165 6.50 760 0.51 SR+D08000 series
H80005051* 51 2” 61.3 2.41 10 150 31 450 230 9.06 1,217 0.82 SR+D08000 series
H80005063* 63 2.1/2” 74.4 2.93 10 150 31 450 290 11.42 1,723 1.15 SR+D08000 series
H80005076* 76 3” 87.5 3.44 10 150 31 450 360 14.17 2,386 1.60 SR+D08000 series
H80005102* 102 4” 114.9 4.52 10 150 31 450 450 17.72 3,530 2.37 SR+D08000 series
H80005127* 127 5” 142.0 5.59 10 150 31 450 510 20.08 5,800 3.90 MARKET FITTINGS
H80005152* 152 6” 167.0 6.57 10 150 31 450 610 24.02 7,200 4.85 MARKET FITTINGS
H80005305* 305 12” 323.0 12.72 10 150 31 450 1,200 47.24 10,200 6.80 MARKET FITTINGS
COVER
• Fuels, oils & diesel with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
FUELSERVICE/10 R4
FUEL & OIL HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80064019* 19 3/4" 29.5 1.16 21 300 84 1218 80 3.14 530 0.36 SR+D08000 series
H80064025* 25 1" 36 1.41 17 240 70 1015 100 3.93 660 0.44 SR+D08000 series
30
H80064031* 31 1.1/4" 42.5 1.67 14 200 56 812 130 5.11 810 0.54 SR+D08000 series
H80064038* 38 1.1/2" 49.5 1.94 11 160 44 638 170 6.69 1,050 0.71 SR+D08000 series
H80064040* 40 1.9/16” 50.0 1.97 10 150 40 580 170 6.69 1,280 0.85 MARKET FITTINGS
H80064045* 45 1.3/4” 56.0 2.20 10 150 40 580 180 7.09 1,490 0.99 MARKET FITTINGS
H80064051* 51 2" 61.5 2.42 10 150 40 580 200 7.87 1,217 0.82 SR+D08000 series
H80064063* 63 2.1/2" 74.5 2.93 10 150 40 580 250 9.84 1,723 1.16 SR+D08000 series
H80064076* 76 3" 88.5 3.48 10 150 40 580 300 11.81 2,500 1.68 SR+D08000 series
H80064102* 102 4" 116 4.56 10 150 40 580 400 15.74 3,600 2.42 SR+D08000 series
H80064127* 127 5” 144.0 5.67 10 150 40 580 510 20.08 5,360 3.57 MARKET FITTINGS
COVER
• Fuels & oils with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 4:1; Exceeds performance SAE
100R4
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
FUELSERVICE/16 D
FUEL & MINERAL OIL DELIVERY HOSE
EN 12115
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80028019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 600 0.40 SR+D08000 series
H80028025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 890 0.59 SR+D08000 series
31
H80028031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 1,000 0.67 SR+D08000 series
H80028038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,350 0.90 SR+D08000 series
H80028051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 2,000 1.33 SR+D08000 series
H80028063* 63 2.1/2" 80.0 3.15 16 240 64 960 300 11.81 2,500 1.67 SR+D08000 series
H80028076* 76 3" 92.0 3.62 16 240 64 960 350 13.78 2,850 1.90 SR+D08000 series
H80028102* 102 4" 122.0 4.80 16 240 64 960 450 17.72 4,150 2.77 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
FUELSERVICE/16 SD
FUEL & MINERAL OIL SUCTION & DELIVERY
HOSE EN 12115
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80029019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 700 0.47 SR+D08000 series
H80029025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 900 0.60 SR+D08000 series
32
H80029031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 1,200 0.80 SR+D08000 series
H80029038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,500 1.00 SR+D08000 series
H80029051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 2,300 1.53 SR+D08000 series
H80029063* 63 2.1/2" 80.0 3.15 16 240 64 960 300 11.81 2,800 1.87 SR+D08000 series
H80029076* 76 3" 92.0 3.62 16 240 64 960 350 13.78 3,300 2.20 SR+D08000 series
H80029102* 102 4" 118.0 4.65 12 180 48 720 450 17.72 4,700 3.13 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord with steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
FUELSERVICE/20 D EN 1825-B
FUEL DELIVERY, AIRCRAFT GROUND
REFUELLING EN 1825 TYPE B
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80032019* 19 3/4" 29.0 1.14 20 300 80 1,200 113 4.45 520 0.35 SR+D08000 series
H80032025* 25 1" 38.0 1.50 20 300 80 1,200 150 5.91 840 0.56 SR+D08000 series
33
H80032031* 31 1.1/4" 45.0 1.77 20 300 80 1,200 200 7.87 1,000 0.67 SR+D08000 series
H80032038* 38 1.1/2" 51.0 2.01 20 300 80 1,200 230 9.06 1,160 0.77 SR+D08000 series
H80032051* 51 2" 65.0 2.56 20 300 80 1,200 305 12.01 1,700 1.13 SR+D08000 series
H80032063* 63 2.1/2" 79.0 3.11 20 300 80 1,200 390 15.35 2,070 1.38 SR+D08000 series
H80032076* 76 3" 92.0 3.62 20 300 80 1,200 460 18.11 2,560 1.71 SR+D08000 series
H80032102* 102 4" 120.0 4.72 20 300 80 1,200 610 24.02 3,740 2.49 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding
APPLICABLE SPECS
EN 1825 Type B / TRbF
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
FUELSERVICE/20 D EN 1825-C
FUEL DELIVERY, AIRCRAFT GROUND
REFUELLING EN 1825 TYPE C
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80033019* 19 3/4" 29.0 1.14 20 300 80 1,200 113 4.45 520 0.35 SR+D08000 series
H80033025* 25 1" 38.0 1.50 20 300 80 1,200 150 5.91 840 0.56 SR+D08000 series
34
H80033031* 31 1.1/4" 45.0 1.77 20 300 80 1,200 200 7.87 1,000 0.67 SR+D08000 series
H80033038* 38 1.1/2" 51.0 2.01 20 300 80 1,200 230 9.06 1,160 0.77 SR+D08000 series
H80033051* 51 2" 65.0 2.56 20 300 80 1,200 305 12.01 1,700 1.13 SR+D08000 series
H80033063* 63 2.1/2" 79.0 3.11 20 300 80 1,200 390 15.35 2,070 1.38 SR+D08000 series
H80033076* 76 3" 92.0 3.62 20 300 80 1,200 460 18.11 2,560 1.71 SR+D08000 series
H80033102* 102 4" 120.0 4.72 20 300 80 1,200 610 24.02 3,740 2.49 SR+D08000 series
REINFORCEMENT
APPLICABLE SPECS
EN 1825 Type C / TRbF
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
FUELSERVICE/20 SD EN 1825-E
FUEL SUCTION & DELIVERY, AIRCRAFT GROUND
REFUELLING EN 1825 TYPE E
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80034019* 19 3/4" 31.0 1.22 20 300 80 1,200 85 3.35 690 0.46 SR+D08000 series
H80034025* 25 1" 39.0 1.54 20 300 80 1,200 115 4.53 970 0.65 SR+D08000 series
35
H80034031* 31 1.1/4" 46.0 1.81 20 300 80 1,200 150 5.91 1,220 0.81 SR+D08000 series
H80034038* 38 1.1/2" 53.0 2.09 20 300 80 1,200 180 7.09 1,590 1.06 SR+D08000 series
H80034051* 51 2" 67.0 2.64 20 300 80 1,200 250 9.84 2,320 1.55 SR+D08000 series
H80034063* 63 2.1/2" 81.0 3.19 20 300 80 1,200 325 12.80 2,860 1.91 SR+D08000 series
H80034076* 76 3" 95.0 3.74 20 300 80 1,200 400 15.75 3,700 2.47 SR+D08000 series
H80034102* 102 4" 123.0 4.84 20 300 80 1,200 550 21.65 5,170 3.45 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord with steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding
APPLICABLE SPECS
EN 1825 Type E / TRbF
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
FUELSERVICE/21 D
FUEL & OIL HOSE, HEAVY DUTY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80006019* 19 3/4” 31.4 1.24 21 300 63 910 90 3.54 508 0.34 SR+D08000 series
H80006025* 25 1” 38.2 1.50 21 300 63 910 115 4.53 575 0.39 SR+D08000 series
36
H80006031* 31 1.1/4” 45.0 1.77 21 300 63 910 150 5.91 729 0.49 SR+D08000 series
H80006038* 38 1.1/2” 51.6 2.03 21 300 63 910 180 7.09 1,027 0.69 SR+D08000 series
H80006051* 51 2” 62.1 2.44 21 300 63 910 240 9.45 1,293 0.87 SR+D08000 series
H80006063* 63 2.1/2” 78.2 3.08 21 300 63 910 300 11.81 1,746 1.17 SR+D08000 series
H80006076* 76 3” 88.9 3.50 21 300 63 910 380 14.96 2,039 1.37 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding
COVER
• Fuels, oils & diesel with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
FUELSERVICE/21 SD
FUEL & OIL HOSE, HEAVY DUTY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80020051* 51 2” 62.1 2.44 21 300 63 910 230 9.06 1,288 0.86 SR+D08000 series
H80020076* 76 3” 88.9 3.50 21 300 63 910 360 14.17 2,497 1.67 SR+D08000 series
37
H80020102* 102 4” 115.1 4.53 21 300 63 910 510 20.08 3,633 2.44 SR+D08000 series
H80020152* 152 6” 170.0 6.69 21 300 63 910 610 24.02 8,250 5.55 MARKET FITTINGS
H80020203* 203 8” 225.0 8.86 21 300 63 910 800 31.50 12,300 8.28 MARKET FITTINGS
COVER
• Fuels, oils & diesel with aromatic content up to 50%
Black synthetic SBR rubber, long lasting, weathering and ozone
resistant
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
FUELDISPENSER/D
FUEL & MINERAL OIL DELIVERY
EN 1360 TYPE 1
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80026012* 12 1/2" 22.0 0.87 16 240 48 720 60 2.36 340 0.23 SR+D08000 series
H80026016* 16 5/8" 26.0 1.02 16 240 48 720 80 3.15 480 0.32 SR+D08000 series
38
H80026019* 19 3/4" 30.0 1.18 16 240 48 720 100 3.94 530 0.35 SR+D08000 series
H80026025* 25 1" 38.0 1.50 16 240 48 720 150 5.91 740 0.49 SR+D08000 series
H80026031* 31 1.1/4" 45.0 1.77 16 240 48 720 175 6.89 1,100 0.73 SR+D08000 series
H80026038* 38 1.1/2" 51.0 2.01 16 240 48 720 225 8.86 1,240 0.83 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord and 2 crossing copper wires for
APPLICATIONS & FLUIDS grounding
APPLICABLE SPECS
EN 1360 Type 1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
FUELDISPENSER/SD
FUEL & MINERAL OIL SUCTION & DELIVERY
EN 1360 TYPE 2
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80027019* 19 3/4" 30.0 1.18 16 240 48 720 100 3.94 630 0.42 SR+D08000 series
H80027025* 25 1" 38.0 1.50 16 240 48 720 150 5.91 930 0.62 SR+D08000 series
39
H80027031* 31 1.1/4" 45.0 1.77 16 240 48 720 175 6.89 1,180 0.79 SR+D08000 series
H80027038* 38 1.1/2" 51.0 2.01 16 240 48 720 225 8.86 1,450 0.97 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord with steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding
APPLICABLE SPECS
EN 1360 Type 2 / TRbF
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
FUELTRUCK/16 D
FUEL & MINERAL OIL DELIVERY HOSE
FOR TRUCK SYSTEMS
EN 1761 TYPE D
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80030019* 19 3/4" 31.0 1.22 16 240 48 720 125 4.92 630 0.42 SR+D08000 series
H80030025* 25 1" 37.0 1.46 16 240 48 720 150 5.91 730 0.49 SR+D08000 series
40
H80030031* 31 1.1/4" 44.0 1.73 16 240 48 720 175 6.89 940 0.63 SR+D08000 series
H80030038* 38 1.1/2" 51.0 2.01 16 240 48 720 225 8.86 1,190 0.79 SR+D08000 series
H80030051* 51 2" 67.0 2.64 16 240 48 720 275 10.83 2,000 1.33 SR+D08000 series
H80030063* 63 2.1/2" 79.0 3.11 16 240 48 720 300 11.81 2,240 1.49 SR+D08000 series
H80030076* 76 3" 92.0 3.62 16 240 48 720 350 13.78 2,730 1.82 SR+D08000 series
H80030102* 102 4" 118.0 4.65 16 240 48 720 450 17.72 3,700 2.47 SR+D08000 series
H80030127* 127 5" 145.0 5.71 16 240 48 720 635 25.00 4,820 3.21 MARKET FITTINGS
H80030152* 152 6" 172.0 6.77 16 240 48 720 750 29.53 6,140 4.09 MARKET FITTINGS
APPLICABLE SPECS
EN 1761 Type D
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
FUELTRUCK/16 SD
FUEL & MINERAL OIL SUCTION &
DELIVERY HOSE FOR TRUCK SYSTEMS
EN 1761 TYPE SD
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80031019* 19 3/4" 31.0 1.22 16 240 48 720 125 4.92 670 0.45 SR+D08000 series
H80031025* 25 1" 37.0 1.46 16 240 48 720 150 5.91 810 0.54 SR+D08000 series
41
H80031031* 31 1.1/4" 44.0 1.73 16 240 48 720 175 6.89 1,040 0.69 SR+D08000 series
H80031038* 38 1.1/2" 51.0 2.01 16 240 48 720 225 8.86 1,380 0.92 SR+D08000 series
H80031051* 51 2" 67.0 2.64 16 240 48 720 275 10.83 2,220 1.48 SR+D08000 series
H80031063* 63 2.1/2" 79.0 3.11 16 240 48 720 300 11.81 2,630 1.75 SR+D08000 series
H80031076* 76 3" 92.0 3.62 16 240 48 720 350 13.78 3,380 2.25 SR+D08000 series
H80031102* 102 4" 118.0 4.65 16 240 48 720 450 17.72 4,420 2.95 SR+D08000 series
H80031127* 127 5" 145.0 5.71 16 240 48 720 635 25.00 5,800 3.87 MARKET FITTINGS
H80031152 152 6" 172.0 6.77 16 240 48 720 750 29.53 8,150 5.43 MARKET FITTINGS
APPLICABLE SPECS
EN 1761 Type SD
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
FUELFLEX/17 SDC
FUEL SUCTION & DELIVERY HOSE
WITH HIGH FLEXIBILITY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80025019* 19 3/4" 31.0 1.22 17 255 68 1,020 19 0.75 670 0.45 SR+D08000 series
H80025025* 25 1" 37.0 1.46 17 255 68 1,020 25 0.98 840 0.56 SR+D08000 series
42
H80025031* 31 1.1/4" 44.0 1.73 17 255 68 1,020 32 1.26 980 0.65 SR+D08000 series
H80025038* 38 1.1/2" 49.0 1.93 17 255 68 1,020 38 1.50 1,120 0.75 SR+D08000 series
H80025051* 51 2" 64.0 2.48 17 255 68 1,020 51 2.01 1,480 0.99 SR+D08000 series
H80025063* 63 2.1/2" 77.0 3.03 15 225 60 900 63 2.48 1,950 1.30 SR+D08000 series
H80025076* 76 3" 89.0 3.50 15 225 60 900 76 2.99 2,150 1.43 SR+D08000 series
H80025102* 102 4" 117.0 4.61 10 150 40 600 102 4.02 3,000 2.00 SR+D08000 series
H80025152* 152 6" 170.0 6.69 10 150 40 600 152 5.98 5,700 3.80 MARKET FITTINGS
APPLICABLE SPECS
Manuli design, safety factor 4:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
FUELTANKER/10 SD
SUCTION & DELIVERY HOSE FOR FUEL
AND MINERAL OIL
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80060051* 51 2" 60.0 2.36 10 150 30 450 110 4.33 1,550 1.05 MARKET FITTINGS
H80060063* 63 2.1/2" 73.5 2.89 10 150 30 450 138 5.43 1,970 1.33 MARKET FITTINGS
43
H80060076* 76 3" 86.0 3.39 10 150 30 450 170 6.69 2,250 1.52 MARKET FITTINGS
H80060102* 102 4" 116.0 4.57 10 150 30 450 230 9.06 3,000 2.02 MARKET FITTINGS
STANDARD PACKAGING
Coil
REMARKS
• Hose wall thickness: DN 51: 4.5mm; DN 63 & DN 76: 5.0mm; DN 102: 7.0mm
• Red thermoplastic spiral diameter: DN 51 & DN 63: 6mm; DN 76 & DN 102: 8mm
ANTI-STATIC FUEL HOSES
MUDSERVICE/28 D
DELIVERY HOSE FOR DRILLING MUDS,
OIL & ABRASIVE SLURRIES
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80035076* 76 3" 96.0 3.78 28 400 112 1,600 559 22.01 3,700 3.27 MARKET FITTINGS
H80035102* 102 4" 124.0 4.88 28 400 112 1,600 762 30.00 4,900 4.33 MARKET FITTINGS
44
H80035127* 127 5" 153.0 6.02 28 400 112 1,600 1,118 44.02 7,000 6.19 MARKET FITTINGS
H80035152* 152 6" 178.0 7.01 28 400 112 1,600 1,524 60.00 8,400 7.43 MARKET FITTINGS
APPLICABLE SPECS
Manuli design, safety factor 4:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ANTI-STATIC FUEL HOSES
PROGAS LPG D
DELIVERY HOSE FOR LPG
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80011012* 12 1/2" 23.0 0.91 25 375 100 1,500 100 3.94 390 0.26 SR+D08000 series
H80011016* 16 5/8" 26.0 1.02 25 375 100 1,500 120 4.72 470 0.31 SR+D08000 series
45
H80011019* 19 3/4" 31.0 1.22 25 375 100 1,500 160 6.30 630 0.42 SR+D08000 series
H80011025* 25 1" 38.0 1.50 25 375 100 1,500 200 7.87 840 0.56 SR+D08000 series
H80011031* 31 1.1/4" 45.0 1.77 25 375 100 1,500 250 9.84 1,050 0.70 SR+D08000 series
H80011038* 38 1.1/2" 52.0 2.05 25 375 100 1,500 320 12.60 1,200 0.80 SR+D08000 series
H80011051* 51 2" 67.0 2.64 25 375 100 1,500 400 15.75 1,830 1.22 SR+D08000 series
H80011063* 63 2.1/2" 81.0 3.19 25 375 100 1,500 550 21.65 2,500 1.67 SR+D08000 series
H80011076* 76 3" 94.0 3.70 25 375 100 1,500 650 25.59 3,020 2.01 SR+D08000 series
H80011102* 102 4" 120.0 4.72 25 375 100 1,500 800 31.50 3,860 2.57 SR+D08000 series
APPLICABLE SPECS
EN 1762 Type D / TRbF
STANDARD PACKAGING
Coil
ANTI-STATIC FUEL HOSES
PROGAS LPG SD
SUCTION & DELIVERY HOSE FOR LPG
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80057012* 12 1/2" 23.0 0.91 25 375 100 1,500 55 2.17 440 0.29 SR+D08000 series
H80057016* 16 5/8" 26.0 1.02 25 375 100 1,500 75 2.95 520 0.35 SR+D08000 series
46
H80057019* 19 3/4" 31.0 1.22 25 375 100 1,500 100 3.94 680 0.45 SR+D08000 series
H80057025* 25 1" 38.0 1.50 25 375 100 1,500 140 5.51 900 0.60 SR+D08000 series
H80057031* 31 1.1/4" 45.0 1.77 25 375 100 1,500 190 7.48 1,180 0.79 SR+D08000 series
H80057038* 38 1.1/2" 52.0 2.05 25 375 100 1,500 200 7.87 1,500 1.00 SR+D08000 series
H80057051* 51 2" 67.0 2.64 25 375 100 1,500 280 11.02 2,200 1.47 SR+D08000 series
H80057063* 63 2.1/2" 81.0 3.19 25 375 100 1,500 380 14.96 2,900 1.93 SR+D08000 series
H80057076* 76 3" 94.0 3.70 25 375 100 1,500 460 18.11 3,580 2.39 SR+D08000 series
H80057102* 102 4" 120.0 4.72 25 375 100 1,500 625 24.61 4,560 3.04 SR+D08000 series
APPLICABLE SPECS
EN 1762 Type SD / TRbF
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
CHEMICAL HOSES
FKM HOSE FOR AGGRESSIVE HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
CHEMKING/10 SD
CHEMICALS WIRE 50
EN 12115 ANTI-STATIC EPDM
HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
CHEMICAL CHEMKING CHEMKING/16 SDE HOSE FOR CHEMICAL
WIRE & COPPER GROUNDING WIRES 51
PRODUCTS
EN 12115 ANTI-STATIC
HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
CHEMKING/16 SDA UHMWPE HOSE FOR CHEMICAL
WIRE & COPPER GROUNDING WIRES 52
PRODUCTS
EN 12115 FEP HOSE FOR HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
CHEMKING/16 SD
CHEMICAL PRODUCTS WIRE & COPPER GROUNDING WIRES 53
CHEMICAL HOSES
CHEMKING/10 D
FKM DELIVERY HOSE FOR AGGRESSIVE
CHEMICALS
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80049006* 6 1/4" 16.0 0.63 10 150 40 600 - - 270 0.18 SR+D08000 series
H80049008* 8 5/16" 18.0 0.71 10 150 40 600 - - 320 0.21 SR+D08000 series
49
H80049010* 10 3/8" 20.0 0.79 10 150 40 600 - - 380 0.25 SR+D08000 series
H80049012* 12 1/2" 23.0 0.91 10 150 40 600 - - 450 0.30 SR+D08000 series
H80049016* 16 5/8" 26.0 1.02 10 150 40 600 - - 530 0.35 SR+D08000 series
H80049019* 19 3/4" 29.0 1.14 10 150 40 600 - - 600 0.40 SR+D08000 series
H80049025* 25 1" 35.0 1.38 10 150 40 600 - - 750 0.50 SR+D08000 series
H80049031* 31 1.1/4" 44.0 1.73 10 150 40 600 - - 1,150 0.77 SR+D08000 series
H80049038* 38 1.1/2" 50.0 1.97 10 150 40 600 - - 1,330 0.89 SR+D08000 series
H80049051* 51 2" 65.0 2.56 10 150 40 600 - - 2,100 1.40 SR+D08000 series
APPLICABLE SPECS
Manuli design, safety factor 4:1
STANDARD PACKAGING
Coil
CHEMICAL HOSES
CHEMKING/10 SD
FKM SUCTION & DELIVERY HOSE FOR
AGGRESSIVE CHEMICALS
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80050019* 19 3/4" 31.0 1.22 10 150 40 600 85 3.35 740 0.49 SR+D08000 series
H80050025* 25 1" 37.0 1.46 10 150 40 600 112 4.41 960 0.64 SR+D08000 series
50
H80050031* 31 1.1/4" 44.0 1.73 10 150 40 600 144 5.67 1,250 0.83 SR+D08000 series
H80050038* 38 1.1/2" 51.0 2.01 10 150 40 600 171 6.73 1,400 0.93 SR+D08000 series
H80050051* 51 2" 67.0 2.64 10 150 40 600 229 9.02 2,150 1.43 SR+D08000 series
H80050063* 63 2.1/2" 80.0 3.15 10 150 40 600 317 12.48 2,600 1.73 SR+D08000 series
H80050076* 76 3" 92.0 3.62 10 150 40 600 380 14.96 3,200 2.13 SR+D08000 series
H80050102* 102 4" 118.0 4.65 10 150 40 600 510 20.08 4,600 3.07 SR+D08000 series
REINFORCEMENT
APPLICABLE SPECS
Manuli design, safety factor 4:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
CHEMICAL HOSES
CHEMKING/16 SDE
ANTI-STATIC EPDM SUCTION &
DELIVERY HOSE FOR CHEMICAL
PRODUCTS - EN 12115
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80061019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 700 0.47 SR+D08000 series
H80061025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 920 0.62 SR+D08000 series
51
H80061031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 1,090 0.73 SR+D08000 series
H80061038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,350 0.91 SR+D08000 series
H80061051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 1,840 1.24 SR+D08000 series
H80061063* 63 2.1/2" 80.0 3.15 16 240 64 960 300 11.81 2,540 1.71 SR+D08000 series
H80061076* 76 3" 92.0 3.62 16 240 64 960 350 13.78 3,200 2.15 SR+D08000 series
H80061102* 102 4" 118.0 4.65 12 180 48 720 450 17.71 4,430 2.98 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord and steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding
COVER
• Suction & delivery for chemicals as per EN 12115 Black synthetic CR rubber, fire-proof, anti-static (R< 1M Ohm/m),
specification chemical, ozone and weathering resistant
• Fireproof and anti-static cover (R < 106 Ohm/m)
APPLICABLE SPECS
EN 12115 (Grade Ω) / TRbF
STANDARD PACKAGING
Coil
CHEMICAL HOSES
CHEMKING/16 SDA
ANTI-STATIC UHMWPE SUCTION &
DELIVERY HOSE FOR CHEMICAL
PRODUCTS - EN 12115
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80047019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 710 0.47 SR+D08000 series
52
H80047025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 870 0.58 SR+D08000 series
H80047031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 1,070 0.71 SR+D08000 series
H80047038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,350 0.90 SR+D08000 series
H80047051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 2,290 1.53 SR+D08000 series
H80047063* 63 2.1/2" 80.0 3.15 16 240 64 960 300 11.81 2,510 1.67 SR+D08000 series
H80047076* 76 3" 92.0 3.62 16 240 64 960 350 13.78 3,080 2.05 SR+D08000 series
H80047102* 102 4" 118.0 4.65 12 180 48 720 450 17.71 4,510 3.01 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord and steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
CHEMICAL HOSES
CHEMKING/16 SD
FEP SUCTION & DELIVERY HOSE FOR
CHEMICAL PRODUCTS - EN 12115
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80048012* 12 1/2" 25.0 0.98 16 240 64 960 84 3.31 320 0.21 SR+D08000 series
H80048019* 19 3/4" 31.0 1.22 16 240 64 960 125 4.92 470 0.31 SR+D08000 series
53
H80048025* 25 1" 37.0 1.46 16 240 64 960 150 5.91 580 0.39 SR+D08000 series
H80048031* 31 1.1/4" 44.0 1.73 16 240 64 960 175 6.89 920 0.61 SR+D08000 series
H80048038* 38 1.1/2" 51.0 2.01 16 240 64 960 225 8.86 1,200 0.80 SR+D08000 series
H80048051* 51 2" 67.0 2.64 16 240 64 960 275 10.83 2,120 1.41 SR+D08000 series
REINFORCEMENT
High tensile synthetic cord and steel helix body wire and 2
APPLICATIONS & FLUIDS crossing copper wires for grounding
APPLICABLE SPECS
EN 12115 (Grade M)/ TRbF / FDA
STANDARD PACKAGING
Coil
CHEMICAL HOSES
HOSES
54
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FOOD & BEVERAGE HOSES
MULTI-PURPOSE LIQUID FOOD HIGH TENSILE SYNTHETIC CORD & 2 STEEL HELIX
MULTIFOOD MULTIFOOD/10 SD
HOSE BODY WIRES 60
LAYFLAT HOSE FOR DRY HIGH TENSILE SYNTHETIC CORD & COPPER
DRY FOOD ABRAFOOD ABRAFOOD/10
FOODS GROUNDING WIRES 61
FOOD & BEVERAGE HOSES
BREWERS/12 SD
BEER, WINE & ALCOHOL SUCTION
& DELIVERY HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80042019* 19 3/4" 32.0 1.26 12 180 36 540 80 3.15 780 0.52 SR+D08000 series
H80042025* 25 1" 38.0 1.50 12 180 36 540 115 4.53 920 0.61 SR+D08000 series
57
H80042031* 31 1.1/4" 46.0 1.81 12 180 36 540 145 5.71 1,190 0.79 SR+D08000 series
H80042038* 38 1.1/2" 52.0 2.05 12 180 36 540 180 7.09 1,480 0.99 SR+D08000 series
H80042051* 51 2" 65.0 2.56 12 180 36 540 245 9.65 1,890 1.26 SR+D08000 series
H80042063* 63 2.1/2" 81.0 3.19 12 180 36 540 340 13.39 2,910 1.94 SR+D08000 series
H80042076* 76 3" 95.0 3.74 12 180 36 540 410 16.14 3,410 2.27 SR+D08000 series
H80042102* 102 4" 122.0 4.80 12 180 36 540 580 22.83 4,960 3.31 SR+D08000 series
REINFORCEMENT
APPLICABLE SPECS
FDA title 21 art. 177.2600 (e) for liquid foods; BfR; ADI free;
CE 1935/2004; PHTHALATE free
STANDARD PACKAGING
Coil
FOOD & BEVERAGE HOSES
BREWERS/12 SDC
BEER, WINE & ALCOHOL SUCTION
& DELIVERY HOSE, IMPROVED FLEXIBILITY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80043031* 31 1.1/4" 46.0 1.81 12 180 36 540 115 4.53 1,040 0.69 SR+D08000 series
H80043038* 38 1.1/2" 52.0 2.05 12 180 36 540 140 5.51 1,510 1.01 SR+D08000 series
58
H80043051* 51 2" 65.0 2.56 12 180 36 540 195 7.68 1,950 1.30 SR+D08000 series
H80043063* 63 2.1/2" 81.0 3.19 12 180 36 540 270 10.63 3,100 2.07 SR+D08000 series
H80043076* 76 3" 95.0 3.74 12 180 36 540 285 11.22 3,600 2.40 SR+D08000 series
H80043102* 102 4" 122.0 4.80 12 180 36 540 335 13.19 5,100 3.40 SR+D08000 series
APPLICABLE SPECS
FDA title 21 art. 177.2600 (e) for liquid foods; BfR; ADI free;
CE 1935/2004; PHTHALATE free
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FOOD & BEVERAGE HOSES
MILKYWAY/10 SD
MILK & FATTY FOODS SUCTION
& DELIVERY HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80044019* 19 3/4" 29.0 1.14 10 150 30 450 40 1.57 650 0.43 SR+D08000 series
H80044025* 25 1" 35.0 1.38 10 150 30 450 55 2.17 820 0.55 SR+D08000 series
59
H80044031* 31 1.1/4" 44.0 1.73 10 150 30 450 74 2.91 1,250 0.83 SR+D08000 series
H80044038* 38 1.1/2" 50.0 1.97 10 150 30 450 86 3.39 1,450 0.97 SR+D08000 series
H80044051* 51 2" 64.0 2.52 10 150 30 450 112 4.41 1,960 1.31 SR+D08000 series
H80044063* 63 2.1/2" 77.0 3.03 10 150 30 450 136 5.35 2,450 1.63 SR+D08000 series
H80044076* 76 3" 90.0 3.54 10 150 30 450 160 6.30 2,970 1.98 SR+D08000 series
H80044102* 102 4" 116.0 4.57 10 150 30 450 380 14.96 6,700 4.47 SR+D08000 series
REINFORCEMENT
APPLICABLE SPECS
FDA title 21 art. 177.2600 (f) for fatty foods; BfR; ADI free;
D.M. 21/03/73; CE 1935/2004; PHTHALATE free
STANDARD PACKAGING
Coil
FOOD & BEVERAGE HOSES
MULTIFOOD/10 SD
MULTI-PURPOSE LIQUID FOOD SUCTION
& DELIVERY HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80045038* 38 1.1/2" 50.0 1.97 10 150 30 450 150 5.91 1,440 0.96 SR+D08000 series
H80045051* 51 2" 63.0 2.48 10 150 30 450 205 8.07 2,100 1.40 SR+D08000 series
60
H80045063* 63 2.1/2" 78.0 3.07 10 150 30 450 285 11.22 2,530 1.69 SR+D08000 series
H80045076* 76 3" 91.0 3.58 10 150 30 450 390 15.35 3,220 2.15 SR+D08000 series
H80045102* 102 4" 120.0 4.72 10 150 30 450 500 19.69 4,630 3.09 SR+D08000 series
REINFORCEMENT
APPLICABLE SPECS
FDA title 21 art. 177.2600 (f) for fatty foods; BfR; ADI free;
D.M. 21/03/73; CE 1935/2004; PHTHALATE free
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FOOD & BEVERAGE HOSES
ABRAFOOD/10
LAYFLAT HOSE FOR DRY FOODS
(GRAINS, SEED, RICE ETC.)
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80046102* 102 4" 112.0 4.41 10 150 30 450 - - 2,430 1.62 SR+D08000 series
H80046152* 152 6" 166.0 6.54 10 150 30 450 - - 4,790 3.19 MARKET FITTINGS
61
KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE
-40 °C, -40 °F
• Layflat delivery structure
80 °C, 176 °F (sterilization at 110°C/230°F for 30 minutes)
• Compact, lightweight and flexible
• Robust hose structure for longer life in severe
applications TUBE
• Long length assemblies available - Max length: 61m White NR rubber, food quality odourless and taste-free
REINFORCEMENT
High tensile synthetic cord and 2 crossed copper wires for hose
APPLICATIONS & FLUIDS grounding
• Delivery hose for dry and abrasive food stuffs (eg: grains, COVER
seed, rice, sugar, flour and animal food) Black CR rubber, fire proof, anti-static (R<1G Ohm/m), chemical,
ozone and weathering resistant
• Cover compound is tested an approved according to
EN 60079-0:2012 (R ≤ 109 Ohm/m)
APPLICABLE SPECS
• Hose structure designed to assure and maintain the
FDA title 21 art. 177.2600 (a, b, c, d) for dry foods; BfR; ADI free;
requirements for the ATEX working conditions D.M. 21/03/73; CE 1935/2004; PHTHALATE free; EN 60079
STANDARD PACKAGING
Coil
FOOD & BEVERAGE HOSES
HOSES
62
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ABRASIVE FLUID HOSES
ABRASIVE FLUID HOSE, HEAVY HIGH TENSILE SYNTHETIC CORD, STEEL HELIX BODY
ABRASERVICE/10 SD
DUTY WIRE & COPPER GROUNDING WIRES 68
ABRASIVE REVERSE CYCLE DRILLING HIGH TENSILE SYNTHETIC CORD & STEEL HELIX BODY
ABRASERVICE ABRASERVICE/35 SD
HOSE WIRE 69
FLUIDS
ABRASERVICE/40 D PLASTER SPRAYING HOSE HIGH TENSILE SYNTHETIC CORD 70
HIGH-PRESSURE CONCRETE
ABRASERVICE/100 D
PUMPING HOSE
HIGH TENSILE STEEL CORD 71
ABRASIVE FLUID HOSES
ABRADRY
LAYFLAT DELIVERY HOSE FOR CONCRETE,
SAND, GRAVEL & OTHER ABRASIVE
DRY MATERIALS
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80051090* 90 3-35/64” 100.0 3.94 6 90 18 270 - - 1,250 0.83 MARKET FITTINGS
H80051102* 102 4" 112.0 4.41 4 60 12 180 - - 1,390 0.93 MARKET FITTINGS
65
H80051127* 127 5" 137.0 5.39 4 60 12 180 - - 1,720 1.15 MARKET FITTINGS
H80051152* 152 6" 162.0 6.38 4 60 12 180 - - 2,050 1.37 MARKET FITTINGS
H80051203* 203 8" 213.0 8.39 4 60 12 180 - - 2,740 1.83 MARKET FITTINGS
APPLICABLE SPECS
DIN 53516 70 ±5mm3
STANDARD PACKAGING
Coil
ABRASIVE FLUID HOSES
SANDSERVICE/21 D
SANDBLASTING & ABRASIVE FLUID HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80019019* 19 3/4” 32.8 1.29 21 300 63 910 90 3.54 524 0.35 SR+D08000 series
H80019025* 25 1” 39.2 1.54 21 300 63 910 115 4.53 668 0.45 SR+D08000 series
66
H80019031* 31 1.1/4” 49.0 1.93 21 300 63 910 150 5.91 1,072 0.72 SR+D08000 series
H80019038* 38 1.1/2” 56.8 2.24 21 300 63 910 180 7.09 1,575 1.06 SR+D08000 series
H80019051* 51 2” 71.4 2.81 21 300 63 910 240 9.45 2,326 1.56 SR+D08000 series
REINFORCEMENT
APPLICATIONS & FLUIDS High strength synthetic cord
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ABRASIVE FLUID HOSES
ABRASERVICE/10 D
ABRASIVE FLUID HOSE, HEAVY DUTY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80021051* 51 2” 67.8 2.67 10 150 30 450 - - 1,656 1.11 SR+D08000 series
H80021076* 76 3” 96.4 3.80 10 150 30 450 - - 3,151 2.11 SR+D08000 series
67
KEY FEATURES CONTINUOUS SERVICE TEMPERATURE RANGE
-40 °C, -40 °F
• Softwall delivery structure
80 °C, 176 °F
• High resistance to continuous abrasion
• Long length assemblies available - Max length: 61m
TUBE
Black, NR/SBR rubber, abrasion resistant thick tube
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
ABRASIVE FLUID HOSES
ABRASERVICE/10 SD
ABRASIVE FLUID HOSE, HEAVY DUTY
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80012051* 51 2” 69.6 2.74 10 150 30 450 200 7.87 2,392 1.60 SR+D08000 series
H80012063* 63 2.1/2” 85.5 3.37 10 150 30 450 250 9.84 3,636 2.44 SR+D08000 series
68
H80012076* 76 3” 98.4 3.87 10 150 30 450 300 11.81 4,590 3.08 SR+D08000 series
H80012102* 102 4” 124.6 4.91 10 150 30 450 450 17.72 6,019 4.04 SR+D08000 series
H80012127* 127 5” 149.0 5.87 10 150 30 450 600 23.62 7,250 4.87 MARKET FITTINGS
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ABRASIVE FLUID HOSES
ABRASERVICE/35 SD
REVERSE CYCLE DRILLING HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80018063* 63 2.1/2” 89.7 3.53 35 508 105 1,523 250 9.8 4,327 2.91 MARKET FITTINGS
H80018076* 76 3” 104.7 4.12 35 508 105 1,523 300 11.8 5,714 3.84 MARKET FITTINGS
69
H80018102* 102 4” 136.0 5.35 35 508 105 1,523 400 15.75 9,272 6.23 MARKET FITTINGS
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
ABRASIVE FLUID HOSES
ABRASERVICE/40 D
PLASTER SPRAYING HOSE
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80014019* 19 3/4” 32.5 1.28 40 580 120 1,740 150 5.90 540 0.36 SR+D08000 series
H80014025* 25 1” 39.3 1.55 40 580 120 1,740 170 6.69 682 0.46 SR+D08000 series
70
H80014031* 31 1.1/4” 45.2 1.78 40 580 120 1,740 200 7.87 883 0.59 SR+D08000 series
H80014035* 35 1.3/8” 51.0 2.01 40 580 120 1,740 200 7.87 1,101 0.74 SR+D08000 series
H80014038* 38 1.1/2” 54.6 2.15 40 580 120 1,740 230 9.05 1,236 0.83 SR+D08000 series
H80014051* 51 2” 67.8 2.67 40 580 120 1,740 270 10.62 1,852 1.24 SR+D08000 series
APPLICABLE SPECS
Manuli design, safety factor 3:1
STANDARD PACKAGING
Coil
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ABRASIVE FLUID HOSES
ABRASERVICE/100 D
DELIVERY HOSE FOR HIGH-PRESSURE
CONCRETE PUMPING
TECHNICAL DATA
HOSES
PART. REF HOSE SIZE R.O.D O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN inch mm inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1
H80015051* 51 2" 66.0 2.59 70.6 2.78 100 1,450 250 3,626 250.0 9.84 2,991 2.01 FF + D08000 series
H80015063* 63 2.1/2" 78.4 3.08 83.0 3.27 100 1,450 250 3,626 320.0 12.59 3,688 2.48 FF + D08000 series
71
H80015076* 76 3" 90.8 3.57 95.4 3.76 100 1,450 250 3,626 380.0 14.96 4,404 2.96 FF + D08000 series
H80015089* 89 3.1/2" 105.0 4.13 109.6 4.31 100 1,450 250 3,626 450.0 17.71 5,353 3.6 FF + D08000 series
H80015102* 102 4" 117.0 4.6 122.5 4.82 100 1,450 250 3,626 500.0 19.68 6,363 4.28 FF + D08000 series
H80015127* 127 5” 147.0 5.79 153.0 6.02 100 1450 250 3625 630 24.80 11,000 7.39 FF + D08000 series
APPLICABLE SPECS
Manuli design safety factor 2.5:1
STANDARD PACKAGING
Coil
ABRASIVE FLUID HOSES
HOSES
72
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FITTINGS
The Manuli Hydraulics fittings range for crimped hose connections comprises 2 families, the Serrated Range
and Full Flow:
• Serrated Range (SR) - universal solution for low and medium pressure hose lines
• Full Flow (FF) - Fittings for high pressure lines, designed to provide low resistance to flowing of
concrete during working operations (such as Abraservice/100 D)
Theses fittings are available upon request. Please contact your local Manuli Hydraulics representative with
your requirements.
DN 16 19 22 25 31 38 51 63 76 102
Inch /8”
5
¾” /8”
7
1” 1¼” 1½” 2” 2½” 3” 4”
FITTINGS
Size -10 -12 -14 -16 -20 -24 -32 -40 -48 -64
FERRULES
SERRATED
73
FULL FLOW
BEVELLED TO WELD
EN 14420-4, SERIES 1
EN 14420-4, SERIES 2
FIXED FLANGE
EN 14420-4, PN16
ASA 150, ASME B16.5
ASA 300, ASME B16.5
SWIVEL FLANGE
EN 14420-4, PN16
FULL FLOW
FULL FLOW
ASSEMBLY MACHINES
As one of the world’s leading suppliers of hose connector solutions Manuli Hydraulics is able to offer some of
the most technically advanced, robust and reliable hose assembly equipment on the market today.
With a product range that encompasses all stages of the hose assembly process, the Manuli range of
machines can cater for everything from on-site repairs to high volume, large-bore production cells.
Full details of the entire range can be found in the Manuli Equipment Catalogue, but some machines that
are specifically suited to industrial hose assembly operations can be found below:
DECOILER
INDUSTRIAL DECOILER
• Max. Capacity: 6”
• Adjustable centre pins
• Remote start / stop controller
MACHINES
• High visibility
• Integrated safety cover
M90 CUT
• Max. Capacity: 3½”
• Heavy duty design
• Electronic soft start
• Integrated smoke extraction
MDH 15 CUT
• Max. Capacity: 10”
• Sensor for blade tensioning
• Water cooling system
• Automatic cutting cycle
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
ASSEMBLY MACHINES
M2000 INS
• Max. Capacity: 6”
• Compact design
• Sturdy
• Available with both automatic and manual operation
CRIMPING MACHINES
MB 450-200
• Max. Capacity: 6”
• Crimp force up to 450 tonnes
• Ergonomic and robust
MACHINES
• Large opening and long master dies
MS 320 OPEN HEAD
• Max. Capacity: 6”
• Crimp force up to 320 tonnes
• Lateral opening and no limit on end connector dimension
75
• Separate power pack and integrated safety system
MS 550 / MS 550-16
• Max. Capacity: 12” / 16”
• Crimp force up to 550 tonnes
• Safe Crimp System (SCS) control
• Step crimping capability
SELECTING THE CORRECT HOSE
The Manuli Hydraulics Industrial Hoses range is a specialised selection of products dedicated to the
conveyance of specific substances in non-hydraulic applications. Each hose type has been designed to cope
with the unique rigours associated with the transport of substances as diverse as fluids, solids and gases. This
dedicated range of products is made from the highest quality materials using state-of-the-art manufacturing
techniques to ensure quality, reliability and long service life.
The Manuli Hydraulics Industrial Hoses range comprises the following product categories:
WATER, AIR & STEAM HOSES - Dedicated to the transport of water, steam and compressed air.
FUEL HOSES - Dedicated to the transport of fuels, oils and fluids with an aromatic content of up to 50%.
CHEMICAL HOSES - Dedicated to the transport of highly aggressive chemicals.
FOOD & BEVERAGE HOSES - Dedicated to the transport of beverages and solid and liquid foodstuffs.
ABRASIVE HOSES - Dedicated to the transport of abrasive fluids such as concrete, plaster, cement and dry
powders.
CHOOSING THE CORRECT HOSE
In order to choose a hose suitable for a specific use it is necessary to determine at least the following basic
points:
APPLICATION
Manuli Industrial Hoses have been designed to suit specific types of applications such as water, air, fuel, etc,
APPENDICES
working pressure allowance should include any peaks and surges that can occur during normal usage.
FLUID COMPATIBILITY
The nature, designation, concentration, temperature and state (liquid, solid, gaseous) of the conveyed fluid
must be determined. In the case of solid substances the granulometry, density and quantity of the solid
substance should be considered as well as the nature, speed and flow of the fluid carrying it.
TEMPERATURE
Ambient temperatures should be considered when selecting hose types.
ENVIRONMENT AND LOCATION
The environmental factors which could affect hose performance and service life should be evaluated when
selecting a hose. Factors such as humidity, exposure to atmospheric agents etc. should be considered.
Environmental conditions such as UV rays, ozone, sea water, chemicals and aggressive elements can cause
premature degradation of the hose. Also consider whether the hose will be located on the ground, suspended
or immersed in a liquid.
MECHANICAL STRESS
The minimum bend radius (ref. product data sheet) required must be evaluated as well as any stresses
related to traction, torsion, bending, vibration, compression, deflection and longitudinal or transversal loads.
ABRASION RESISTANCE
Manuli Industrial Hoses are manufactured to ensure a good overall resistance to abrasion. However, if the
hose is to be used in conditions where there may be excessive corrosion, dragging or impact then it is
advisable to use additional protection to prevent untimely wear of the cover.
FITTINGS
In order to guarantee safe and reliable performance, the fittings used must be selected according to the
manufacturer’s recommendation(s). The complete assembly must guarantee the working pressure listed by
the hose manufacturer and fittings must be crimped in accordance to the latest published specifications.
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY
Resistance to:
Physical Strength
Gas permeation
temperatures
temperatures
Mineral oils
Weather /
Gasolines
Abrasion
Ozone
High
Low
International Common /
Elastomer Symbol Trade Name
APPENDICES
Ethylene Propylene Copolymer EPM EPM G F E G P P E E
Ultra High Molecular Weight Polyethylene UHMWPE UHPE G E E G G G F G
Polyester resin PET PET G E G G G G G G
Polyamid Resin PA Nylon G E E E E E E G
Polyurethane PU Urethane E E G F G F G E
Polyvinyl Chloride (plasticized) PVC PVC F G E G G G P P
Fluorinated Ethylene Propylene PTFE Teflon G F E E E E E G
77
Silicone VMQ Silicone G G G G F F E E
Fluoropolymer FKM Viton G G E E E E E E
Carboxylated Nitrile Rubber X-NBR Carboxylated Nitrile G E G G E E G G
Fluorinated ethylene propylene FEP FEP G G G G E E E G
E - Excellent
G - Good
F - Fair
P - Poor
Manuli Hydraulics Industrial Hoses are designed for fluid transfer applications with a specific transfer fluid which is specified in the
relevant hose data sheet. They are not intended for diversified applications with various chemicals.
The following recommendations regarding generic chemicals are based on literature data regarding the polymers used for the tube
compound. The actual field results of the fluid conveyed in the hose should be carefully tested and field validated by users.
FLUID COMPATIBILITY
LEGEND OF RATINGS
E = Excellent - Small or negligible changes of compound properties: no problem for use. Service life can exceed the expectations.
G = Good - There are only minor changes of some compound properties. Service life is normally in line with state of the art (standard)
expectations.
FT = Field Test recommended - A field test is recommended to allow the end user to either validate the selection in the actual working
conditions or to reject the selection. Compatibility data shows significant changes on some compound properties, service life can be
reduced. Higher durability can be achieved with reduced severity of working conditions (temperature in particular) or with an upgraded
hose selection. After the results of the recommended field test, if the end user decides to use the selected hoses under his validation,
the end users assumes all responsibility with regard to any possible effects and consequences arising out of the using of hoses in the
actual working conditions and Manuli Hydraulics cannot be held responsible for any claims in relation to or connected with the hoses
for which it was recommended to perform a field test.
REMARKS
O-Rings used with couplings must also be considered for chemical compatibility with the fluid to be conveyed. This includes fittings
containing internal O-Rings. Standard O-Ring of Manuli Hydraulics fittings are made of Nitrile rubber (NBR). If you use special fluids
or very high temperatures, different O-Ring materials should be used, contact Manuli Hydraulics for specific information.
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY
CHLOROPRENE
NBR / X-NBR
EPDM / EPM
CHEMICALS
UHMWPE
VMQ
FKM
SBR
CIIR
FEP
NR
ACETALDEHYDE X FT FT G G G E G E E
ACETHIL ACETONE X E X X E - X X E X
ACETIC ACID 10% G E G FT E G FT G E E
ACETIC ACID 50% X FT X X G G FT G E FT
ACETIC ACID GLACIAL 100% X X X X FT G FT X E G
ACETIC ANHYDRIDE 50% FT FT G X E G E X E FT
ACETONE X FT FT X E E G X E E
ACETYLENE (GAS) E E E G E G E E E E
ACRYLIC NITRATE X E G - E - G G E E
ADIPIC ACID E E E - E - - E E E
AIR ATMOSPHERIC UP TO °C 70 80 70 70 120 120 175 200 100 90
AIR COMPRESSED UP TO °C X 80 X X X 120 175 200 100 90
ALIMENTARY VINEGAR E E E FT E - E FT E E
ALLYL CHLORIDE X X X - X - E - E X
APPENDICES
ALUMINIUM ACETATE (AQUEOUS) E E E FT E E X - E E
ALUMINIUM AND POTASSIUM SULPHATE (DOUBLE) G E E G E E G E E E
ALUMINIUM CHLORIDE (AQUEOUS) E E E G E e X E E E
ALUMINIUM FLUORIDE E E E FT E E E E E E
ALUMINIUM HYDROXIDE E E E G E - E E E E
ALUMINIUM NITRATE (AQUEOUS) E E E G E E G - E E
ALUMINIUM PHOSPHATE (AQUEOUS) E E E - E - E E E E
A AMMONIA (AQUEOUS) E E E FT E G E E E E
79
AMMONIA (LIQUID) G G G FT E G FT X E E
AMMONIA 20°C (VAPOUR) E E E - E G E E E E
AMMONIUM CARBONATE (AQUEOUS) G E G - E E G E E E
AMMONIUM CHLORIDE (AQUEOUS) E E E G E E E E E E
AMMONIUM DIPHOSFATE (AQUEOUS) E E E - E E G E E E
AMMONIUM METAPHOSPHATE E E E - E E E E E E
AMMONIUM NITRATE E E E - E E G - E -
AMMONIUM NITRATE (AQUEOUS) E E E FT E E E E E E
AMMONIUM PERSULPHATE (AQUEOUS) E E E - E E E - E E
AMMONIUM PHOSPHATE (AQUEOUS) E E E G E E G E E E
AMMONIUM SULPHATE E E E G E E E E E E
AMMONIUM THIOCYANATE E E E - E E E - E E
AMYL CHLORIDE X X X X X X FT - E X
AMYLIC ALCOHOL E E E FT E G E E E E
ANILINE X FT X X X G G G E E
ANIMAL GLUE E E G - FT - E E E E
ANTIMONY CHLORIDE 50% FT E E - E X X E E E
AQUA REGIA G X X X FT - FT G E X
ARGON (GAS) E E E G E E E E E E
ARSENIC ACID E E G FT E E E E E E
ASPHALT G G X X X X G E E E
BARIUM CHLORIDE (AQUEOUS) E E E G E E E E E E
BARIUM HYDROXIDE E E E G E E E E E E
BARIUM SULPHATE E E E G E - E E E E
BENZALDEHYDE X X FT X G E FT G E -
B BENZENE, BENZOL X X X X X X X G E X
BENZOIC ACID (AQUEOUS) X X X X X X X E E E
BENZYL ALCOHOL X FT G X E - E E E FT
BENZYL BENZOATE X X X - G G - E E -
BENZYL CHLORIDE X FT FT - X X G E E FT
FLUID COMPATIBILITY
CHLOROPRENE
NBR / X-NBR
EPDM / EPM
CHEMICALS
UHMWPE
VMQ
FKM
SBR
CIIR
FEP
NR
BISMUTH CARBONATE E E E - E E E E E E
BISULPHATE (SO2 SOLUTION) FT - E - E - - E E E
BITUMEN UP TO °C 120 X X - X X X 180 130 X
BORIC ACID (AQUEOUS) E E E - E E FT E E E
BRINE (KITCHEN SALT SOLUTION) E E E G E E E E E E
BROMINE X X X X X X X E E X
BROMINE WATER X X X X X X X E E X
BROMOBENZENE X X X X X - X E E X
BROMOCHLOROMETHANE X X X X FT X X E E X
BUTADIENE X G X X FT X - E E E
BUTANE (GAS) E E G X G X FT E E X
BUTANE (LIQUID) E E X X X X FT E E E
B
BUTIL ACETATE X X FT X G G FT X E -
BUTYL ALCOHOL (BUTANOL) E E E G E G G E E X
APPENDICES
BUTYL AMINE FT X X - X X G X E -
BUTYL BENZOATE X X X - E X - E E -
BUTYL ETHER E G X X FT FT FT - E E
BUTYL GLYCOLE E FT E - E G G E E E
BUTYL OIL - X X X G - - E E -
BUTYL PHTALATE (DIBUTYL PHTHALATE) FT FT FT X G - G G E FT
BUTYL STEARATE G X X X FT X E E E X
BUTYLENE (LIQUID) G FT FT - G X - E E X
80
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY
CHLOROPRENE
NBR / X-NBR
EPDM / EPM
CHEMICALS
UHMWPE
VMQ
FKM
SBR
CIIR
FEP
NR
COAL TETRACHLORIDE FT X X - X X X E E X
COCONUT OIL E G X X E FT E E E X
COLZA OIL G G X X E - X E E -
COPPER CHLORIDE E E E FT E E E E E E
COPPER CYANIDE E E E FT E E E E E E
COPPER HYDROXIDE X G E - E - E - E E
COPPER NITRATE E E E FT E - E E E E
COPPER SULPHATE (AQUEOUS) E E E FT E G E E E E
C
CORN OIL E G X X G FT E E E X
COTTONSEED OIL E G X X E FT G E E E
CREOSOTE X X X X G X G E E X
CRESOLS FT FT X X X - G E E X
CRUDE OIL FT X X X X X X E E FT
CYCLOEXANE (HEXAIDROBENZENE) E X X X X X X E E E
APPENDICES
CYCLOEXANOL G E G X X - G E E E
CYCLOHEXANONE X X X X FT G G X E E
DECAHYDRONAPHTALENE (DECALIN) G X X X X X X E E E
DETERGENTS SYNTHETIC 20°C E E E FT E E E E E E
DIACETONE ALCOHOL X FT X FT E E E X E G
DIAMINE ETHYLENE G E E FT E - FT G E E
DIBENZYL ETHER X X X X G G G E E -
DIBUTHYL PHTLATE G FT FT X X FT - G E FT
81
DIBUTHYL SEBACATE X X X X G FT E G E E
DIBUTHYLAMINE X X X X X X FT X E -
DIBUTHYLKETONE X FT FT X G G - - E G
DICHLORBENZENE FT X X X X X X E E FT
DICHLORETHYLENE X X X X X X X G E X
DICHLOROMETHANE FT X X X X X X G E X
DIESEL FUEL (50°c) - FLUID TRANSFER ONLY E FT X X X X X E E X
DIESEL FUEL BIO RME E FT X X X X X E E X
DIESEL OIL G FT X X X X X E E G
DIETHANOLAMINE FT - - FT E E - - E E
D DIETHYL ESTER OF ADIPIC ACID X FT FT - E - - X E -
DIETHYL ETHER X FT X X X - X X E X
DIETHYLAMINE FT FT G FT G - G X E FT
DIETHYLBENZENE X X X X X X X - E -
DIETHYLENE GLYCOL E E E G E - G E E E
DIETHYLPHTALATE (DEPH) X X X X X - - FT E E
DIMETHYLAMINE X X X FT G - - X E FT
DIMETHYLANILINE X X FT - G X G E E -
DIMETHYLETHER FT FT X X X - - FT E G
DIMETHYLFORMAMIDE G FT E - G G G X E E
DIOCTYL PHTHALATE X X X X G - FT G E FT
DIOCTYL SEBACATE X X X - G FT FT G E -
DIOXIN X X X - G G X X E E
DIPHELYL FT X X - X X X E E G
DIPHENIL OXIDE X X X - X - G FT E -
DISTILLED WATER E E E E E E E E E E
DODECYL ALCOHOL E E - - E G - E E -
EPICHLOROHYDRIN (LIQUID) X X X - G G X X E E
ESSENCES WITH HIGH AROMATIC CONTENT G FT X - X X X E E X
E
ESSENCES WITH LOW AROMATIC CONTENT E FT X - X X X E E X
ESSENTIAL OILS G X X X - X X E E X
FLUID COMPATIBILITY
CHLOROPRENE
NBR / X-NBR
EPDM / EPM
CHEMICALS
UHMWPE
VMQ
FKM
SBR
CIIR
FEP
NR
ETHANE (GAS) E G X - X X FT E E E
ETHANOLAMINE G E E FT E G FT G E E
ETHIL ACETATE X FT FT X G G G X E G
ETHYL ACRYLATE (ETHYLACRILIC ESTER) X FT FT X G G G X E -
ETHYL ALCOHOL E E E G E E E E E E
ETHYL BENZENE FT X X X X X X G E X
ETHYL BROMIDE E E G - E X X E E G
E ETHYL CHLORIDE (CHLOROETHYL) X X X X X FT X G E X
ETHYL ETHER X FT X X X - X X E X
ETHYL GLYCOL X X G - G G - X E E
ETHYL MERCAPTAN X FT X - FT X FT X E -
ETHYLENE (GAS) E G X X - X G E E E
ETHYLENE CHLORIDE (DICHLOROETHYLENE) FT FT FT X G X X E E X
ETHYLENE GLYCOL E E G G E E E E E E
APPENDICES
ETHYLENE OXIDE X X X - FT FT X X E X
FERROUS CHLORIDE (AQUEOUS) E E E G E - E E E E
FERROUS SULPHATE E E E - E - E E E E
FLUORINE - - - - FT - - G E X
FLUOROBENZENE X X X - X X X E E -
FLUOROBORIC ACID 65% G G G FT G - X - E E
FLUOROSILICIC ACID G FT E FT G - X X E E
FORMALDEHYDE G G G FT G G E E E E
82
F FORMALIN G E E FT E - G E E E
FORMIC ACID G E E FT E - G FT E G
FUEL A (iso-octane) E FT X X X X X E E X
FUEL B (70% iso-octane, 30% toluene) G FT X X X X X E E X
FUEL C (50% iso-octane, 50% toluene) G X X X X X X E E X
FUEL HIGH AROMATIC FT X X X X X X E E X
FUEL LOW AROMATIC G X X X X X X E E X
FURFURYL ALCOHOL X G G X G G G FT E X
GALLIC ACID X X FT - G G E E E E
GLUCOSE E E E G E E E E E E
G
GLYCERINE E E E G E E E FT E E
GREASY ACIDS IN GENERAL G G FT - FT X FT E E FT
HELIUM E E E G E E E E E E
HEPTANE E G X X X X X E E E
HEXALDEHYDE X G FT X G G FT - E E
HEXANE E E X X X X X E E E
HEXIL ALCOHOL (HEXANOL) G G E G E - FT - E E
HYDRAULIC BRAKES FLUID G FT X X X FT X E E G
HYDRAULIC OILS ESTER BASED G X X X G X X G G -
HYDRAULIC OILS GLYCOL BASED E G X X E FT G FT E E
HYDRAULIC OILS MINERAL BASED E FT X X X X X E E FT
H HYDRAULIC OILS PHOSPHATE ESTER BASED X X X X G G G E E X
HYDRAZINE G G G X E E X X E E
HYDRAZINE HYDRATE (AQUEOUS) FT FT X X E G FT E E E
HYDROBROMIC ACID FT G FT G G E G E E E
HYDROCHLORIC ACID (GAS) X X X X G G - X E E
HYDROCHLORIC ACID 15% (MURIATIC ACID) G FT E G E FT E E E E
HYDROCHLORIC ACID 38% (MURIATIC ACID) FT FT G FT E X FT E E E
HYDROCYANIC ACID 20% FT FT X X E - G E E -
HYDROFLUORIC ACID 10% FT X FT X X - E G E G
HYDROFLUORIC ACID 30% X X X X X - E G E G
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY
CHLOROPRENE
NBR / X-NBR
EPDM / EPM
CHEMICALS
UHMWPE
VMQ
FKM
SBR
CIIR
FEP
NR
HYDROFLUORIC ACID 75% X X X X X - G G E X
HYDROGEN (GAS) E E G FT E G FT E E E
H HYDROGEN PEROXIDE 10% (PERHYDROL) FT X FT X G G E G E G
HYDROGEN PEROXIDE 30% (PERHYDROL) X X X X G G E E E E
HYDROGEN SULPHIDE X FT X X E E - G - -
IODINE (ALCOHOLIC SOL. 5-10%) G X G - G - X E E FT
ISOBUTYL ALCOHOL G E G FT E E E E E E
ISO-OCTANE E G X X X X E E E X
ISOPROPYL ACETATE X X FT X G G G X E -
I
ISOPROPYL ALCOHOL G E E G E E E E E E
ISOPROPYL BENZOL X X X G X - X E E -
ISOPROPYL CHLORIDE X - X - X - - E E -
ISOPROPYL ETHER FT FT X X FT X - FT E FT
K KEROSENE G FT X X X X FT E E X
APPENDICES
LACTIC ACID (AQUEOUS) FT FT G FT G G E E E G
LANOLIN E G X - FT - FT E E G
LAURYL ALCOHOL E E - - E - - E E -
L LEAD ACETATE (AQUEOUS) E E E FT E E E - E E
LEAD NITRATE E E E - E E G - E -
LEAD SULPHATE E E E G E E E - E E
LINSEED OIL E G X X FT FT E E E X
MAGNESIUM CHLORIDE (AQUEOUS) E E E G E E E E E E
83
MAGNESIUM HYDROXIDE G E G FT E E - E E -
MAGNESIUM SILICATE (TALC) E E E - E E E E E E
MAGNESIUM SULPHATE G E G G E E E E E E
MAGNESIUM SULPHITE (AQUEOUS) E E E - E E E E E E
MALEIC ACID (AQUEOUS) X X FT X FT X - E E E
MALIC ACID (AQUEOUS) E E E FT E X E E E E
MERCURY E E E G E E E E E E
MERCURY CHLORIDE FT G E - E E E E E E
MERCURY NITRATE E E E - E E E - E E
MESITYL OXYDE X X X X G X X X E -
METHANE (GAS) E FT X X FT X FT E E E
M
METHIL ACETATE X X X X G G X X E E
METHYL ALCOHOL (METHANOL) E E E G E E E G E E
METHYL CHLORIDE X X FT X G FT X FT E X
METHYL GLYCOL - G X - G - - X E E
METHYL PHTHALATE X X X - G - - G E -
METHYLAMINE (AQUEOUS) X E E - E - - E E E
METHYLETHYLKETONE X X X X G FT FT X E E
METHYLISOBUTHYLKETONE X X X - FT FT FT X E E
METHYLMETACRYLATE X X X X X X - X E G
MILK - - - - E E G - G E
MONOCHLOROACETIC ACID X X X FT G E X X E X
MONOCHLOROBENZOL X X X - X - FT G E X
NAPHTA (OIL) E X X X X X G E E X
NATURAL GAS E E E X E X X E E E
NATURAL GAS (HUMID) E E FT X FT X X E E G
NICKEL SULPHATE (AQUEOUS) E E E G E E E E E E
N
NITRIC ACID 10% FT FT FT X E - FT G E E
NITRIC ACID 25% X X X X E - X G E E
NITRIC ACID 40% X X X X G - X G E X
NITRIC ACID 60% X X X X FT - X G E X
FLUID COMPATIBILITY
CHLOROPRENE
NBR / X-NBR
EPDM / EPM
CHEMICALS
UHMWPE
VMQ
FKM
SBR
CIIR
FEP
NR
NITROBENZENE X X FT X X FT X G E X
NITROGEN E E E G E E E E E E
NITROPROPANE X X X - G G X X E -
N
NITROTOLUENE FT X X - FT FT - FT E E
NITROUS OXIDE (GAS) E E E G E - E E E E
NONYLALCOHOL (NONANOL) X E X - E - G E E E
OCTANE E FT X X X X X E E E
OCTYL ALCOHOL G E G FT E G G E E E
OIL & GREASES ANIMAL BASED E G X X G X FT E E E
OIL & GREASES MINERALS BASED UP TO °C 120 80 X X X X X 200 130 70
OIL & GREASES SILICONE BASED E E E G E X G E E E
OIL & GREASES VEGETABLE BASED E FG FT X FT FT FT E E G
Oil IRM (ASTM) n°1, 100°C E G X X X X G E E G
O
Oil IRM (ASTM) n°2, 100°C E G X X X X FT G E FT
APPENDICES
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY
CHLOROPRENE
NBR / X-NBR
EPDM / EPM
CHEMICALS
UHMWPE
VMQ
FKM
SBR
CIIR
FEP
NR
POTASSIUM PHOSPHATE E G E - E E X E E E
POTASSIUM SULPHATE E E E - E E E E E E
POTASSIUM SULPHITE E E E - E E E E E E
PROPANE (GAS) E G G X FT X X E E G
PROPANE (LIQUID) E G X X X X FT E E X
PROPIONIC ACID X FT X - E E - E E E
PROPYL ACETATE X E X X E G - X E G
PROPYL ALCOHOL G E E G E E G E E E
PROPYL AMINE X X X - X E X X E -
P PROPYLENE FT X X X X X X E E -
PROPYLENE CHLORIDE X X X X X X X - E X
PROPYLENE GLYCOL FT E E G E G E E E E
PROPYLENE GLYCOL G E E G E E - E E E
PROPYLENE OXIDE X X X - G G X X E -
APPENDICES
PRUSSIC ACID 20% (HYDROCYANIC ACID) FT FT G X E - G G E E
PRUSSIC ACID 80% (CONC.) FT FT FT X G - G G E E
PURINE E E E - E - E E E E
PYRANOLS (OIL FOR TRANSFORMER) E X X - X - G E E FT
PYRIDINE X X X - E G X FT E E
SEA WATER (BRINE, BRACKISH) E G G G E E E E E E
SILICA E E E - E E E E E E
SOAP AND SOAP SOLUTIONS E E E FT E E E E E E
85
SODIUM ACETATE E E E X E FT E G E E
SODIUM BICARBONATE E E E G E E E E E E
SODIUM BISULPHATE E E E FT E - E E E E
SODIUM BISULPHITE E E E FT E - E E E E
SODIUM CARBONATE (SODIUM CALCINATE) E E E G E E E E E E
SODIUM CHLORATE E E E - E X E E E E
SODIUM CHLORIDE (KITCHEN SALT) E E E G E E E E E E
SODIUM CYANIDE E E E X E - E E E E
SODIUM DICHROMATE FT G FT X E - G E E E
SODIUM FLUORIDE E E E - E E G E E E
SODIUM HYDROXIDE 20°C (CAUSTIC SODA, SODIUM HYDRATE) G E E X E E G FT E E
SODIUM HYDROXIDE CONC. 100°C X FT X X G G X X E X
SODIUM HYPOCHLORITE 30% G X FT - E G FT FT E G
S
SODIUM METAPHOSPHATE E E E FT E - E E E E
SODIUM NITRATE E E E G E E E E E E
SODIUM PERBORATE E E E FT E E E E E E
SODIUM PEROXIDE G FT G FT G E X G E -
SODIUM PHOSPHATE AND TRISODIC PHOSPHATE E E E - E E E E E E
SODIUM SILICATE (AQUEOUS) E E E G E E E E E E
SODIUM SULPHATE (AQUEOUS) E E E - G E E E E E
SODIUM SULPHITE E E E - E G E E E E
SODIUM THIOSULPHATE (ANTICHLORINE) E E E - E E E E E E
SOYBEAN OIL E G X X FT FT E E E X
STANNOUS CHLORIDE E E E G G E G E E E
STARCH (AQUEOUS) E E E - E - E E E E
STARCH SYRUP E E E - E - E E E E
STEARIC ACID G G G X G G E G E X
STYRENE (MONOMER) X X X X X X X G E X
SUGAR (AQUEOUS) E E E G E E E E E E
FLUID COMPATIBILITY
CHLOROPRENE
NBR / X-NBR
EPDM / EPM
CHEMICALS
UHMWPE
VMQ
FKM
SBR
CIIR
FEP
NR
SULPHONITRIC ACID X X X X X - X X E X
SULPHOPHOSPHORIC ACID X FT X X G - - E E FT
SULPHUR 90°C (MOLTEN) X X X - X FT E E E X
SULPHUR DIOXIDE X FT X X E G FT E E G
SULPHUR TRIOXIDE FT X G X G G FT E E E
SULPHURIC ACID 10% E E E FT E G G E E E
SULPHURIC ACID 30% (FOR ACCUMULATORS) G G G FT E FT X E E E
S SULPHURIC ACID 50% FT FT FT X E X X E E E
SULPHURIC ACID 75% X X X X G X X E E FT
SULPHURIC ACID 90% X X X X FT X X E E X
SULPHURIC ACID OR OLEUM (STEAMING) X X X X X FT X E E X
SULPHUROUS ACID 10% HUMID FT FT FT FT E G E G E E
SULPHUROUS ACID 75% HUMID X X X X G FT FT G E FT
SULPHUROUS HYDROGEN (DRY) G FT FT - G - E E E E
APPENDICES
TRIBUTYL PHOSPHATE X X X - E X - X E E
T TRICHLOROETHANE (CHLOROETHANE) X X X X X X X E E X
TRICHLOROETHYLENE FT X X X X X X G E X
TRICHLOROMETHANE (CHLOROFORM) X X X - X X X E E X
TRICRESYLPHOSPHATE X FT E X E - E G E FT
TRIETHANOLAMINE G E FT FT FT G E E E E
TRIETHYLAMINE FT - - X X - - - E E
TRIOCTHYLPHOSPHATE G X X X X E FT X E E
TRISODIC PHOSPHATE E E E - E E E - E E
TURPENTINE (ESSENCE, OIL) E X X X X X X E E FT
U UREA E E E - E E E E E E
VASELINE G G G G G - - - - G
V VINYL ACETATE E E E X E - - G E -
VINYL CHLORIDE (MONOMER) X X G X G X X E E X
WATER E G E E E E G G G G
WATER STEAM UP TO °C 80 X X X 130 130 120 150 120 X
W
WEATHER (EXPOSURE TO): GEN. REG. X G X FT E E E E E G
WOOD OIL G FT X X X - FT E E G
XYLENE, XYLOLO X X X X X X X G E X
X
XYLENOL X X X - X X X G E X
ZINC ACETATE (AQUEOUS) G G X G E - X X E E
Z ZINC CHLORIDE (AQUEOUS) E E E G E E E G E E
ZINC SULPHATE (AQUEOUS) E E E G E E E E E E
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
FLUID COMPATIBILITY
WARNING
MANULI HYDRAULICS HAVE NOT PERFORMED TESTING ON FINISHED HOSE ASSEMBLIES WITH ANY OF THE CHEMICALS
MENTIONED ABOVE.
THE RATING OF THE TUBE POLYMERS IN RELATION TO SPECIFIC CHEMICALS AND FLUIDS IS BASED ON LITERATURE
DATA AND DOES NOT IMPLY ANY GUARANTEE FROM MANULI HYDRAULICS THAT A HOSE USING THAT SPECIFIC
POLYMER IS SUITABLE FOR CONVEYING SAID CHEMICAL OR FLUID. ANY USE OF MANULI INDUSTRIAL HOSES WITH
FLUIDS OTHER THAN THOSE SPECIFIED IN THE HOSE DATA SHEETS IS DONE UNDER THE SOLE AND EXCLUSIVE
RESPONSIBILITY OF THE END USER AND NO LIABILITY WHATSOEVER CAN BE ATTRIBUTED TO MANULI HYDRAULICS
IN THAT REGARD.
ANY APPLICATION OF INDUSTRIAL HOSES WITH VARIOUS FLUIDS AND CHEMICALS, MUST BE FIELD TESTED AND
APPROVED BY USERS.
COMPATIBILITY OF HOSE AND FITTINGS WITH CONVEYED FLUID IS AN ESSENTIAL FACTOR IN AVOIDING CHEMICAL
REACTIONS THAT MAY RESULT IN RELEASE OF FLUIDS OR FAILURE OF THE HOSE OR CONNECTION. THIS CHEMICAL
COMPATIBILITY GUIDE MUST NOT BE USED IN CONJUNCTION WITH ANY OTHER COMPATIBILITY GUIDES FROM
PREVIOUS OR FUTURE CATALOGUE EDITIONS, BULLETINS OR PUBLICATIONS. INCORRECT USE OF THESE CHARTS
COULD RESULT IN DEATH, PERSONAL INJURY OR PROPERTY DAMAGE.
APPENDICES
some chemical families used in various industrial sectors
87
Aliphatic solvents Propane, butane, pentane, hexane, helptane, dipentene, tripropylene
Esters solvents Butyl acetate, methyl acetate, amyl acetate, isobutyl acetate
15 mins
WHITENING Table 2) 15%* 100°C indicates the temperature and
time that must not be exceeded
INTERMEDIATE Drainage to complete removal of
DRINKING WATER - 20°C 5 mins
RINSE organic waste
See manufacturer’s instructions
PESTICIDES PURSUANT
5% - Max. for correct usage - Manuli only
SANITIZATION TO APPLICABLE LAW IN 30 mins
15%* 100°C indicates the temperature and
COUNTRY OF USE
88
The recommendations listed below are intended to prevent damage to the rubber hoses. For more accurate
cleaning & sanitization procedures follow your regional and national laws concerning foodstuff hose cleaning.
Table 2
PRODUCT RUBBER COMPOUNDS CONCENTRATION TEMPERATURE
HOT WATER ALL 0 Max. 95°C
STEAM ALL 0 Max. 110°C
Max. 2% Max. 85°C
CAUSTIC SODA ALL
Max. 5% Max. 25°C
Max. 0.1% Max. 85°C
NITRIC ACID NO SBR/NR
Max. 2% Max. 25°C
CHLORINE ACETIC ACID NO SBR/NR Max. 1% Max. 25°C
PER ACETIC ACID NO SBR/NR Max. 1.5% Max. 25°C
PHOSPHORIC ACID NO SBR/NR Max. 2% Max. 65°C
OTHER T.B.C. T.B.C. T.B.C.
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
APPENDICES
BRANDING OF HOSES
Manuli Industrial Hoses are clearly marked with indelible mylar tape and are branded with the Manuli Ryco
group logo.
STORAGE OF HOSES AND ASSEMBLIES
All hose products manufactured by Manuli Hydraulics are designed to be robust, reliable and long-
lasting. Our proprietary rubber compounds are among some of the most advanced in the world and,
as a company, we fully stand behind the quality and reliability of our products.
However, by its nature even the highest quality rubber will degrade over time, and certain environmental
conditions have been categorically linked to an increase in the rate at which this deterioration can occur.
Industrial standards such as BS 5244, SAE J1273, DIN 20066, ISO 8331 & ISO 2230 all vary in their
recommendations of safe storage conditions and maximum shelf-life.
Manuli hoses can be safely stored for extended periods in most typical warehousing conditions, but in order
to minimise deterioration of stored hoses Manuli Hydraulics recommends the following:
• Bulk hoses should be stored for no longer than 6 years (based on hose production date), including no
more than 6 months storage time as assemblies.
• Extremes of temperature and humidity, along with abnormal fluctuations in temperature, can affect
storage life. Manuli recommends a cool, dry storage location away from direct sunlight.
• If bulk hoses are stored coiled, the inside coil diameter should not be less than 2x the minimum bend
APPENDICES
radius of the specific hose. Coiled hoses should also never be stacked on top of one another.
89
APPENDICES
HANDLING
Most precautions necessary when handling Manuli hoses are simple common sense and, as long as the user
respects the technical nature of the hose and treats it accordingly, it is unlikely that they will encounter any
issues caused due to incorrect handling.
A few considerations to bear in mind are:
• If a hose is twisted do not pull it suddenly to attempt to untwist it.
• Avoid dragging hoses over abrasive surfaces. If you are moving bulk hose or large assemblies,
consider using pallets or other similar methods.
PRE-USAGE
All Manuli hoses are made to meet or exceed their stated specifications, so assuming the hose is properly
assembled you can be confident that the hose will perform as expected without any issues.
APPENDICES
USAGE
90
Similarly, general good practice for the intended application will usually prevent any excessive wear or damage
to the hose.
A few important considerations are:
• Do not kink or crush the hose as this can irreparably damage the hose reinforcement structure which
can lead to bursting.
• Only use the hoses to convey their intended fluids / substances.
• Do not exceed the stated working pressure of the hose.
MAINTENANCE
Manuli hoses are designed to be reliable and easy to maintain. Standard equipment maintenance schedules
should be sufficient to ensure that any signs of damage or wear on hoses can be spotted well in advance of
them becoming problematic.
REPAIR
Used rubber hoses are not usually considered to be repairable if signs of deterioration are noted during
maintenance inspections. However, if damage or wear is limited to the ends of the hose then it may be
possible to cut off the worn section and reassemble the hose. However, a reassembled hose will not have the
expected service life of a new hose and should still be replaced according to the maintenance schedule as if
it were the original hose assembly.
WWW.MANULI-HYDRAULICS.COM/INDUSTRIAL-HOSES
Global Marketing Office
Email: marketing@manuli-hydraulics.com
www.manuli-hydraulics.com/industrial-hoses