Automatic Transmission Fluid III-H

Product Data Sheet
Product Sinopec Automatic Transmission Fluid III-H

Summary Product description
Sinopec Automatic Transmission Fluid III-H is a multifunctional fluid
formulated with high viscosity index synthetic base oil and selected additives.
It is suitable for use in the automatic transmission systems of many vehicles,
and in some power steering and hydraulic systems.
Available sizes
Also
available
in bulk
1L PAIL – 18L DRUM – 200L IBC – 1000L
Applications
Sinopec Automatic Transmission Fluid III-H is suitable for use in:

® ®
All vehicles where GM DEXRON III, Ford MERCON or Allison C-4 fluids are required.
 Four-, five-, and some six-speed automatic transmissions used in US, Japanese and some European passenger cars.
 Power steering units of some passenger cars.
 Many automatic transmissions, power steering and hydraulics systems in heavy-duty vehicles used, for example, in the
construction industry.
 Hydrostatic drives and hydraulic systems in industrial, agricultural, mining and marine applications where GM
® ®
DEXRON III, Ford MERCON or Allison C-4 is specified.
 Some specific hydraulic systems that require an ISO VG 32, 46 or 68 fluid.
 Not recommended for use in continuously variable transmission (CVT) systems.
Features and benefits

 Outstanding oxidation stability, thermal stability and detergency ensure long fluid life and prevent the build up of
deposits.
 Excellent frictional characteristics improve transmission efficiency and shifting performance, and ensure consistent,
reliable, trouble-free operation of transmission systems.
 Excellent antiwear performance and good oil film strength protect components from wear and ensure long transmission
life.
 Very good low-temperature properties protect against wear under cold start-up and running conditions and ensure
good low-temperature shift performance.
 Effective control of foaming ensures good transfer of power and shifting performance, and reduces fluid loss in severe
service conditions.
 Fully compatible with common seal materials found in transmission systems, to extend seal life and prevent fluid
leakage.
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
PERFORMANCE IN MOTION
Page 1
Product Data Sheet
Typical data
Sinopec Automatic Transmission Fluid III-H
Kinematic viscosity, ASTM D 445
cSt @40℃ 33.89
cSt @100℃ 7.32
Viscosity, Brookfield, ASTM D 2983
cP @ -30℃ 2400
cP @ -40℃ 9000
Viscosity index, ASTM D 2270 185
Copper corrosion, 3 hours 150℃, ASTM D 130 1b
Pour point, ℃, ASTM D 97 -40
Flash point (COC), ℃, ASTM D 92 198
Density @ 20℃, kg/l, ASTM D 4052 0.845
Colour Red
These data are given as an indication of typical values and not as exact specifications.
Industry and OEM specifications

Sinopec Automatic Transmission Fluid III-H meets the performance requirements of the following OEM
specifications:
Allison C-4
®
Ford MERCON
®
GM DEXRON III-H
Nissan 1998 to 2004: Most except as noted
2005-2006: 4 cyl Altima, 4-speed Maxima, 4-speed Quest
Subaru Before 2005，Most except as noted
Volvo 1995-1998: 850, 940, 960; 70, 90 Series
1999-2000: V50, V70, V70R and XC70 with AW50-42 or AW42AWD; C70
1999 to 2005: S80 with 4T65EV, XC90 with 4T65AWD , S70 with AW50-42 or
AW42AWD
Sinopec Automatic Transmission Fluid III-H holds the following OEM approvals:
Allison C-4
Accuracy of information
Data provided in this PDS is typical and subject to change as a result of continuing product research and development. The
information given was correct at the time of printing. The typical values given are subject to variations in the testing procedures
and the manufacturing process may also result in slight variations. Sinopec guarantees that its lubricants meet any industry and
OEM specifications referred to on this data sheet.
Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling. Information on best
practice is available from your local distributor.
Product and environmental safety

This product should not cause any health problems when used in the applications suggested and when the guidance provided
in the Material Safety Data Sheet (MSDS) is followed. Please consult the MSDS for more detailed advice on handling; MSDSs
are available from your local distributor. Do not use the product in applications other than those suggested.
As with all products, please take care to avoid environmental contamination when disposing of this product. Used oil should be
sent for reclamation/recycling or, if not possible, must be disposed of according to relevant government/authority regulations.
The SINOPEC trademark is registered and protected.
Issued: March 2017

© Sinopec 2017 Sinopec Automatic Transmission Fluid III-H
The information contained herein is subject to change without notification due to continuing
research & development therefore properties may be subject to slight variations.
PERFORMANCE IN MOTION
Page 2

Automatic Transmission Fluid III-H

Uploaded by

Copyright:

Available Formats

Automatic Transmission Fluid III-H

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Automatic Transmission Fluid III-H

Uploaded by

Copyright:

Available Formats

Product Data Sheet

Product Sinopec Automatic Transmission Fluid III-H

1L PAIL – 18L DRUM – 200L IBC – 1000L

Features and benefits

Industry and OEM specifications

Product and environmental safety

Issued: March 2017

You might also like