Professional Documents
Culture Documents
SARENS HEAVY Calibaration
SARENS HEAVY Calibaration
s.N. Nomenclafure Make Id./Sr. No. Certificate No. Due Date of Calibration Calibrated By
1. 6.5 Digit Precision Multimeter Fluke 2s.ls/Er/02 cc202022000000837F 04-11.-2023 AIPLNoida
2. Multifunction Calibrator ( 5% Digit ) Megatronics 2S1S/ET /01. PPL/07-23/0076/4 75-07-2024 PPL-Noida
3. S.S. Weights Weightronics 2SI$SW-02 T\E/W / 07 /2022/ 568 22-06-2023 Tycon Engg.
Traceability : Master equipment used are traceable to S.l. units through unbroken chain calibration from NABL accredited lab. / competent
competent lab. / NPL, New Deihi.
3. 15 15.11
4. 20 20.18
5. 30 30.20
6. 35 35.%
NOTE: -
1. The calibration results reported in this certificate are valid at the time and the stated condition of measurement.
2. This report should not be reproduced except in full without our prior permission in writing.
3. UUC : - Unit Under Calibration / GUT : - Gauge Under Testing.
4. Calibration certificate without signature are not valid.
5. The results stated in the certificate reiates to the referred calibrated item only.
6. The details of calibrated item, referred in the certificate are mentioned as per the informantion provided by customer ordy.
, 7. CAB establishes haceability of its measurement standards to the Si by means of an unbroken chain of calibrations or comparisions
s.N. Nomenclature Make Id./Sr. No. Certificate No. Due Date of Calibration Calibrated By
Traceability @S.I.unitsthroughunbrokenchainofcalibrationfromNABLaccreditedlab,/competentlab./NPL,Nex,
equipment through
at:
Calibration Performed On Site I Calibration Method Used: WI-034M ( Comparison Method )
ealbretles ncqgltl-El
Standard Reading (Master ) Measured Reading (UUC )
Sr. No. (ry's)
( rry's )
2. L) 4.5
3. 1,0.4 1.4.2
4. 1,6.9 16.4
5. 19.6 1,9.3
NOTE : -
1. The calibration results reported in this certificate are valid at the time and the stated condition of measurement'
2. This report should not be reproduced except in ful1 without our prior permission in writing.
3. UUC : - Unit Under Calibration / GUT : - Gauge Under Testing.
4. Calibration certificate without signature are not valid.
5. The results stated in the certificate relates to the referred calibrated item only.
6. The details of calibrated item, referred in the certificate are mentioned as per the informantion provided by customer only.
, 7. CAB establishes kaceability of its meajurement standards to the SI by means of an unbroken chain of calibrations or comparisions
Linking them to relevant primary standards of the SI units of measurement, The link to SI units may be achieved by reference to
,#.ru\
ional/lntemational measurement standards. n
\r,-{
.^WKuy ftf*=ffi tssu"a)'appioved Bv