Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per
metre) cross arm for 4 wire over head line complete with 1 clamps,bolts, nuts and washer etc including drilling of holes for Set 8 insulator pins etc (as per drawing) and painting with primer and finished and finished paint as required . Erection of angle iron/ channel iron cross arm on wood/ RCC/ 2 PCC/steel tubular/ rail pole etc. as required. Set 4
Supplying and erection of 75 mm X 90 mm shackle insulator
3 with G. I. Bolt, nuts and straps etc. as required . set 8
Supplying and erection of 100 mm X 80 mm pin insulator with
3 G. I. spindle, nuts and straps etc. as required . set 32
4 Supply of 55mm2 All alloy aluminum conductor AAAC Km 1.2
Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm
5 diameter including binding etc. as required. kg 50
6 Supply of aluminium binding wire kg 4
7 Supply and fixing phase separator in overhead line Each 20
Supply and laying of 4x25sq. mm.,650/1100 V grade XLPE
insulated, pvc tape inner sheathed armoured Aluminium cable 8 Metre 15 with proper clamping arrangement on wall surface including making terminations of end connections etc. as required.
Supply and installation of 40 A changeover switch with enclosure
9 each 1
Providing and fixing 400 A 4 pole MCCB with thermomagnetic
release and terminal spreaders in existing cubicle panel board 10 each 1 including drilling holes in cubicle panel, making connections, etc. as required
Supplying and fixing of 6 way (4+18), single door, horizontal type,
three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper busbar, 11 neutral busbar, earth bar, din bar, interconnections,powder Each 1 painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Supplying and fixing 16 Amps rating, 415V C curve TPN MCB
suitable for inductive load in the existing MCB distribution 12 board complete with connections, testing and commissioning etc. each 2 as requiired
Supplying and fixing 32 Amps rating, 415V C curve TPN MCB
suitable for inductive load in the existing MCB distribution 13 board complete with connections, testing and commissioning etc. Each 1 as requiired