TROLLEY BAR &

TRACK ASSEMBLY

부산광역시 강서구 가달1로80

80, Gadal 1-ro, Gangseo-gu, Busan, Republic of
Korea 46729
TEL:051-941-3845 FAX: 051-941-3846
EMAIL: eunchang2020@daum.net
EUNCHANG STEEL
COPPER HEAD RAILS
BAR SYSTEM

PANTOGRAPH

ISOLATING SECTION JOINT KEEPER EXPANSION SECTION POWER FEEDER

( REPAIR PART )

SHIELD CABLE
HANGER CLAMP WITH INSULATOR

EXPANSION SECTION

HANGER CLAMP WITH INSULATOR PANTOGRAPH COLLECTOR

POWER FEEDER

ISOLATING SECTION ( REPAIR PART ) JOINT KEEPER

EUNCHANG T&C CO.,LTD. 06 + 07

 EUNCHANG STEEL • STEELBASE COPPER HEAD RAILS
COPPER HEAD RAILS • JOINTKEEPER
• EXPANSION SECTION

BAR SYSTEM • ISOLATING SECTION (REPAIR PART)

▶STEEL BASE COPPER HEAD RAILS ▶EXPANSION SECTION

EC-SEC-03
500A 1500A 800A

A
LEFT BAR GAP RIGHT BAR
20 20

10
80 20 30 30

18
70 200 70
A
45

Specification Specification
Item No. Material Weight(Kg) Length(mm) Current Rating(A) Current Surrounding temperature 'G' GAP to surrounding temperature during normal operation
Item No. Material during installation(℃)
ES-STB-03 SS41-Cu 24 6,000 300 Rating(A) 40℃ 50℃ 60℃
ES-STB-05 SS41-Cu 26 6,000 500 EC-SEC-03 BRASS 300 - 1 0 ~ 0 33 38 43
ES-STB-06 SS41-Cu 28 6,000 600 EC-SEC-05 BRASS 500 1 ~ 1 0 28 33 38
ES-STB-08 SS41-Cu 30 6,000 800 EC-SEC-06 BRASS 600 1 1 ~ 2 0 23 28 33
ES-STB-10 SS41-Cu 36 6,000 1,000 EC-SEC-08 BRASS 800 2 1 ~ 3 0 18 23 26
ES-STB-12 SS41-Cu 41 6,000 1,200 EC-SEC-10 BRASS 1,000 3 1 ~ 4 0 13 18 23
ES-STB-15 SS41-Cu 51 6,000 1,500 EC-SEC-12 BRASS 1,200
ES-STB-18 SS41-Cu 53 6,000 1,800 EC-SEC-15 BRASS 1,500
ES-STB-20 SS41-Cu 58 6,000 2,000 EC-SEC-18 BRASS 1,800
EC-SEC- 20 BRASS 2,000

▶JOINT KEEPER ▶ISOLATING SECTION (REPAIR PART)

EC-SJK-02 EC-SIS-002

200
Ø11X13 SLOT HOLES 20 30 30 20 20 30 30 20

Specification Specification
Item No. Material Current Rating(A) Item No. Material Length(mm) Remark
EC-SJK-01 BRASS 300 EC-SIS-002 MC NYLON 100 INSULATOR
EC-SJK-02 BRASS 500~600
※Custom make
EC-SJK-03 BRASS 800~1000
EC-SJK-04 BRASS 1200
EC-SJK-05 BRASS 1500
EC-SJK-06 BRASS 1800
EC-SJK-07 BRASS 2000

EUNCHANG T&C CO.,LTD. 08 + 09

 EUNCHANG STEEL • HANGER CLAMP WITH INSULATOR
COPPER HEAD RAILS • POWER FEEDER

• LOCATING CLAMP

BAR SYSTEM • PANTOGRAPH

▶HANGER CLAMP WITH INSULATOR ▶PANTOGRAPH (Single Type for side Wall)
EC-HC-1 EC-HC-2 EC-HC-3

Specification
Item No. Material (1) Weight(g)
EC-HC-1 Porcelain 1800
EC-HC-2 Epoxy 1000 EC-PG-001
EC-HC-3 Porcelain 2200

▶POWER FEEDER
▶PANTOGRAPH (Double Type for side Wall)

It is the device to compensate a voltage drop- Specification

ping that is caused by main power lengthen- Item No. Material Current Rating(A)
ing of main power feed or mileage. EC-SPF-01 BRASS 300~1000
EC-SPF-12 COPPER 1200 EC-PG-002
EC-SPF-15 COPPER 1500
EC-SPF-18 COPPER 1800
EC-SPF-20 COPPER 2000

▶LOCATING CLAMP
▶PANTOGRAPH (Type for downward pressure)
EC-SLC-001 EC-SLC-002

Item No. Material Weight(g)

EC-SLC-001 SS41 190
EC-PG-005
EC-SLC-002 BRASS 360

EUNCHANG T&C CO.,LTD. 10 + 11

 COMPONENTS OF
TROLLEY-BAR

EXPANSION SECTION HANGER WITH INSULATOR (OUT SIDE)

HANGER CLAMP (IN SIDE) JOINT COVER

END CAP JOINT KEEPER POWER COVER

COLLECTOR

HANGER WITH INSULATOR POWER FEED & COVER

A hanger clamp to fix the TROLLEY-BAR Electric supplier to feed the power into
in outdoors or the area that occurs the dust. a TROLLEY-BAR.

END CAP COLLECTOR

A end cover to put on end of TROLLEY-BAR. A collection device to deliver the power to loaded part.

EXPANSION SECTION
A segregation device to absorb or to supplement the
BRACKET expansion or shrinking of conductor that is accompanied by
A hanger clamp - serves as equipment support. surrounding temperature change.

JOINT KEEPER
A keeper to connect Bar and Bar.

HANGER CLAMP JOINT COVER

A hanger clamp to fix the Bracket at A insulated cover to insulate the exposed
TROLLEY-BAR. conductor on joint electrically.

EUNCHANG T&C CO.,LTD. 12 + 13

 COMPONENTS OF
TROLLEY-BAR
• TROLLEY-BAR AMPEAH KIND
COMPONENTS OF • MATERIAL OF TROLLEY-BAR

• JOINT TYPE OF TROLLEY-BAR

TROLLEY-BAR • ACCESSORIES PARTS OF TROLLEY-BAR

TROLLEY-BAR AMPEAH KIND ACCESSORIES PARTS OF TROLLEY-BAR

Item No. ▶POWER FEEDS & COVER ▶HANGER CLAMPS
Rated Current Length Weight
Standard Type Special Type Joint Type
(A) (mm) (g) 60~300A 500A
(70℃ Heatproof) (110℃ Heatproof)
60 3,000 2,400 ET-1-007 ET-2-007
90 3,000 2,750 ET-1-001 ET-2-001
160 3,000 3,000 ET-1-009 ET-2-009 Pin
Connection
200 3,000 3,000 ET-1-003 ET-2-003
300 3,000 3,150 ET-1-005 ET-2-005
500 3,000 5,300 ET-1-011 ET-2-011 Clamp Connection

160A type is the acid-proof TROLLEY-BAR for special area made of Stainless Steel.

MATERIAL OF TROLLEY-BAR
Specification
Use Material
Indoors Galvanized Steel
Outdoors and dust area Galvanized Steel +Epoxy Insulator
Domestic Stainless Steel
indoors and outdoors PVC

Weight(g) Item No.

110 EH-1-001
210 EH-2-001
110 EH-3-001
110 EH-4-001
Specification
Space between lines ▶ JOINT COVER
Rated Current Reactance (Ω/m) Direct current Extension rate
(A) Material resistance (Ω/m) (%) Specification
50mm 80mm
Type
60 Galvanized Steel 1.68×10 -4 1.98×10 -4 0.0018 0.00011
60,90,160,200A Standard Type 70℃ Heatproof
90 Gal. Steel(85%) Copper 1.68×10 -4 1.98×10 -4 0.00032 0.00012
300,500A 70℃ Heatproof
160 Copper(50%) STS(50%) 1.68×10 -4 1.98×10 -4 0.00032 0.00014
200 Gal. Steel(50%) Copper(50%) 1.68×10 -4 1.98×10 -4 0.00032 0.00014 Item No. Weight(g) Space between lines
300 Copper 1.68×10 -4 1.98×10 -4 0.00019 0.00017 EP-1-001 140 60,90,160A : 50m
500 Copper(Solid) 1.68×10 -4 1.98×10 -4 0.00013 0.00017 EP-1-002 1,000 200,300,500A : 100m
Specification
Voltage dropping is necessarily occurred when traveling dis- Type Weight(g) Item No.
JOINT TYPE OF TROLLEY-BAR tance of conducting wire is lengthened. Power feeder should
be possibly at the mid point of all conducting wires to make up
60~300A
Standard Type
70℃ Heatproof 25 EJC-1-001

for voltage dropping and extra power feeder is additionally at- Standard Type
500A 600 EJC-1-002
70℃ Heatproof
tached in case of 3% and over voltage dropping rate.

Pin Connection Clamp Connection

60A~300A 500A

EUNCHANG T&C CO.,LTD. 14 + 15

 • EXPANSION SECTION
• JOINT KEEPER

COMPONENTS OF • CARBON BRUSH

• COLLECTORS

TROLLEY-BAR • END CAP/MOUNTING BAR

▶EXPANSION SECTION ▶CARBON BRUSH ▶COLLECTORS

H-30A TANDEM TYPE / 300A HOIST TYPE / 30~90A(H-TYPE)

C-60A

CRANE TYPE / 60~200A (C-TYPE) CRANE TYPE / 60~200A(AL-TYPE)

Specification
Surrounding temperature GAP Setting
(when it is installed)
30℃ 13mm C-90A
20℃ 19mm
10℃ 25mm

TYPE Space between lines Specification

90A, 160A 50mm Type Collecting capacity(A) Item No. Weight(g)
200,300,500,1000A 35mm 90A 180 ECT-1-001 2,740
Tandem Type 150A 300 ECT-1-002 3,300
A separate device to absorb and to complement the expansion and 200A 400 ECT-1-003 3,400
shrinking of conductor caused by surrounding temperature change
as space is given on train rail and section to be installed and Gap are Type Collecting capacity(A) Use Rotating radius Item No. Weight(g)
C-200A
changed by surrounding temperature when it is installed with A ca- 30 Going straight & rotating Min. 500m/m ECH-1-001 810
Hoist Type 60 Going straight & rotating Min. 1250m/m ECH-1-002 820
pacity.
90 Going straight ECH-1-003 835
▶JOINT KEEPER 60 Going straight & rotating Min. 1250m/m ECC-1-002 1,350
90 Going straight ECC-1-003 1,370
60~200A Crane Type
150 Going straight ECC-1-004 1,650
200 Going straight ECC-1-005 1,700

PANTOGRAPH 300A

▶END CAP/ MOUNTING BAR

Specification Type Item No. Weight(g)
Type Material Item No. Weight(g) End Cap - Standard Type EEC-1-001 10
60, 90,160,200A Copper EJK-1-001 10 Mounting Bar EMB-1-001 850
300A(T/D) Copper EJK-1-002 20

EUNCHANG T&C CO.,LTD. 16 + 17

 CONSTRUCTION OF
AL-HEAVY-BAR
AL-BAR-H consists of the
following parts

FEED-IN CONDUCTOR JOINT ASSEMBLY EXPANSION JOINT (SECTION)

HANGER (OUTDOORS)

JOINT BAR (KEEPER)

CONDUCTOR
COLLECTOR

JOINT ASSEMBLY HANGER (OUTDOORS )

Used for protection and insulation of connections. Used to outdoors and in dusty places.

EXPANSION JOINT (SECTION)

Absorb terminal expansion/Contraction.(Install one expansion per 60m)

FEED-IN CONDUCTOR
Used For feeding sections.

CONDUCTOR
The full length is covered with insulation
materials 500A,1000A,1500A
JOINT BAR (KEEPER) Standard length:6m
Conductors shall be.

COLLECTOR
Moving contact transfers power to equipment.

EUNCHANG T&C CO.,LTD. 18 + 19

 CONSTRUCTION OF
AL-HEAVY-BAR • INSULATION

• EXPANSION
CONDUCTOR
SECTION
• HANGER

• COLLECTOR
CLAMP

AL-BAR-H consists of the • JOINT ASSEMBLY • CARBON BRUSH

following parts • FEED– IN CONDUCTOR

ACCESSORIES FOR AL-HEAVY-BAR

▶INSULATION CONDUCTOR ▶EXPANSION SECTION ▶HANGER CLAMP ▶COLLECTOR

1500A
1000A
500A

Specification Specification Specification

Rated Current Length Weight Material Conductor Rated Current Installation intervals GAP Rated Current Weight
(A) (m) (kg) Insulation Cover Type Item No.
(A) for laying Setting(mm) (A) (g)
500 6 18.4 Aluminum 500 195 500 950 Out Door ECHC-AL-1001
1000 6 26.0 and 1000 215 1000,1500 980 Out Door ECHC-AL-1002
1500 6 34.0 STS P.V.C
1500 230
▶CARBON BRUSH
Reactance A.C.resistance Length Surrounding temperature
Item No. Item No.
×10 -4 (Ω/m) ×10 -4 (Ω/m) (m) during installation(℃)
1.83 0.56 EC-AL-1001 6 50 ECES-AL-1001
1.53 0.33 EC-AL-1002 6 30 ECES-AL-1002
1.43 0.23 EC-AL-1003 6 20 ECES-AL-1003

▶JOINT ASSEMBLY ▶ FEED– IN CONDUCTOR

Specification Specification Specification Specification

Rated Current (A) Item No. Rated Current (A) Item No. Rated Current Weight Rated Current Weight
(A) (g) Material Item No. (A) (g) Arm Item No.
500 ECJC-AL-1001 500 ECPF-AL-1001
1000 ECJC-AL-1002 1000 ECPF-AL-1002 380 Metallic Carbon ECCS-AL-1001 300 6 Single ECCC-AL-1001
300
1500 ECJC-AL-1003 1500 ECPF-AL-1003 380 Metallic Carbon ECCS-AL-1002 600 12 Tandem ECCC-AL-1002

EUNCHANG T&C CO.,LTD. 20 + 21

 CONSTRUCTION OF
UB-BAR • UB-BAR

• JOINT KEEPER
• HANGER

• POWER
CLAMP
FEEDER / COVER ▶HANGER CLAMP
UB-BAR consists of the • JOINT COVER • COLLECTOR

following parts • EXPANSION SECTION • END CAP

▶UB-BAR Specification
Item No. Capacity Material
EC-UHC-002 200A - 500A P.V.C
EC-UHC-003 200A - 500A STEEL + EPOXY
EC-UHC-003 800A - 1000A STEEL + EPOXY
EC-UHC-004 1500A - 2000A STEEL + EPOXY

▶POWER FEEDER / COVER

Specification
Item No. Capacity Material A(mm) B(mm)
EC-U30-2 200A Copper 21 40
EC-U30-3 300A Copper 21 40
EC-U30-5 500A Copper 21 40
EC-U40-8 800A Copper 32 55
EC-U40-10 1000A Copper 32 55
Specification
EC-U50-15 1500A Copper 37 65
EC-U50-18 1800A Copper 37 65 Item No. Capacity Material
EC-U50-20 2000A Copper 37 65 EC-UDF-003 200A - 500A BRASS
EC-UDF-004 800A - 1000A BRASS
EC-UDF-005 1500A - 2000A BRASS

▶JOINT KEEPER ▶COLLECTOR

Specification
Item No. Capacity Material
EC-UJK-003 200A - 500A BRASS
EC-UJK-004 800A - 1000A BRASS
EC-UJK-005 1500A - 2000A BRASS

▶JOINT COVER

Specification
Specification Item No. Capacity Material
Item No. Capacity Material ECCC-UC-001 300A S AL
EC-UJC-003 200A - 500A P.V.C ECCC-UC-002 300A T/D AL
EC-UJC-004 800A - 1000A P.V.C ECCC-UC-003 500A S AL
EC-UJC-005 1500A - 2000A P.V.C ECCC-UC-004 500A T/D AL

▶EXPANSION SECTION ▶END CAP

Specification Specification
Item No. Capacity Material Item No. Capacity Material
EC-UES-003 200A - 500A BRASS EC-UEC-003 200A - 500A RUBBER
EC-UES-004 800A - 1000A BRASS EC-UEC-004 800A - 1000A RUBBER
EC-UES-005 1500A - 2000A BRASS EC-UEC-005 1500A - 2000A RUBBER

EUNCHANG T&C CO.,LTD. 22 + 23

 CONSTRUCTION OF
H-BAR • H-BAR

• JOINT KEEPER
• EXPANSION

• POWER
SECTION
FEEDER
▶EXPANSION SECTION
H-BAR consists of the • JOINT COVER • COLLECTOR

following parts • HANGER CLAMP • END CAP

Specification
▶H-BAR
Item No. Capacity Material
EC-HES-005 500A BRASS
EC-HES-008 800A BRASS
EC-HES-010 1000A BRASS

▶POWER FEEDER

Specification
Item No. Capacity Material A(mm) B(mm)
EC-H-5 500A AL - SUS 36 51
EC-H-8 800A AL - CU 36 51
EC-H-10 1000A AL - SUS 36 61
Specification
▶JOINT KEEPER Item No. Capacity Material
EC-HPF-001 common Copper

Specification
Item No. Capacity Material ▶COLLECTOR
EC-HJK-005 500A BRASS
EC-HJK-008 800A BRASS
EC-HJK-010 1000A BRASS

▶JOINT COVER

Specification
Item No. Capacity Material
EC-HJC-005 500A - 800A P.V.C
EC-HJC-090 1000A P.V.C Specification
▶HANGER CLAMP Item No. Capacity Material Weight(kg)
EHT - 001 500A AL 1.5
EHT - 002 1000A AL 3

Specification End Cap

Item No. Capacity Material Item No. Capacity Material
EC-HHC-001 500A - 1000A P.V.C EC-HEC-005 500A-800A RUBBER
EC-HHC-002 500A - 1000A STEEL + EPOXY EC-HEC-090 1000A RUBBER

EUNCHANG T&C CO.,LTD. 24 + 25

FESTOON CABLE
SYSTEM
LEAD CARRIER
JOINT CLAMP

TRACK CLAMP
TRACK UNDER HANGER CABLE CARRIER

UNDER HANGER TRACK CLAMP

CONTROL CARRIER

TRACK JOINT CLAMP

LEAD CARRIER CABLE CARRIER

EUNCHANG T&C CO.,LTD. 26 + 27

 • TRACK • TRACK CLAMP
FESTOON CABLE • UNDER
• LEAD
HANGER
CARRIER
• JOINT CLAMP
• STOPPER

SYSTEM • CABLE CARRIER • CONTROL CARRIER

FESTOON CABLE SYSTEM I-BEAM TROLLEY

▶TRACK ▶UNDER HANGER ▶STOPPER
EC-CMH-075 EC-CH-05

•Type:EC-SST-35 •Type:EUH-1 •Type:EST-1

•Material:Steel,Aluminum,STS •Material:Steel •Material:Steel
•The load of maximum section:60kg •Surface treatment:Galva •Surface treatment:Galva
•Length bracket:1.5m •Capacity needed:1.5m •Capacity needed:1ea/Line EC-CH-05N EC-CH-1 (STS)
•Length per piece:Max-5m ※ AL Track hanger is option(EUH-1-AL)

▶LEAD CARRIER ▶CABLE CARRIER ▶CONTROL CARRIER

EC-CH-1 EC-CH-2
•Type:ELC-1 •Type:ECC-1
•Material:Steel •Material:Steel
•The load of maximum section:30kg •Limited load:30kg
•Surface treatment:Galva(Steel) •Surface treatment:Galva(Steel)
•Capacity needed:1ea/Line •Capacity needed:1ea/ 2m

▶TRACK CLAMP ▶JOINT CLAMP

EC-CH-2H EC-CH-3H

•Type:E-CON-1
•Material:Steel
•Surface treatment:Galva & Paint
•Use : A carrier that connects the
Push Botton when
•Type:ETC-1 •Type:EJC-1
Pendent Push Button
•Material:Steel •Material:Steel
disjointed from Hoist is
•Limited load:30kg •Surface treatment:Galva
separately installed.
•Capacity needed:1ea/Line •Capacity needed:1ea/Line

EUNCHANG T&C CO.,LTD. 28 + 29

 FESTOON CABLE
SYSTEM • I-BEAM TROLLEY

▶I-BEAM TROLLEY
    
           
      

EC-LH-05 EC-CH-05 EC-EH-05 EC-LH-3 EC-CH-3 EC-EH-3

EC-LH-05 EC-CH-05N EC-EH-05N EC-LH-2H EC-CH-2H EC-EH-2H

EC-LH-1 EC-CH-1 EC-EH-1 EC-LH-3H EC-CH-3H EC-EH-3H

EC-LH-2 EC-CH-2 EC-EH-2 EC-LH-S2H EC-CH-S2H EC-EH-S2H

EUNCHANG T&C CO.,LTD. 30 + 31

FESTOON CABLE
SYSTEM

    
      

EC-LHDS-1H EC-CHDS-1H EC-EHDS-1H

EC-LHDS-2H EC-CHDS-2H EC-EHDS-2H

EC-LHDS-3H EC-CHDS-3H EC-EHDS-3H

    
      

EC-LHDS-1H EC-CHDS-1H EC-EHDS-1H

EC-LHDS-2H EC-CHDS-2H EC-EHDS-2H

EC-LHDS-3H EC-CHDS-3H EC-EHDS-3H

EUNCHANG T&C CO.,LTD. 32 + 33